You are on page 1of 60

Equipment and systems for

· FLNG’s
· FPSO’s and service vessels
· Mobile drilling units
A catalogue of Norwegian suppliers and service providers

January 2012 WWW.INTSOK.COM


Introduction

The first floating production system (FPS) ever installed was at the Argyll field in the UK
sector of the North Sea in 1975. The floating platform was constructed by converting the
Transworld 58 semisubmersible drilling rig for production. FPSs have since then become a
common solution for developing deepwater fields around the world as floating solutions
are superior to fixed installations in terms of development cost when the water depth
exceeds 150-200 meters. Fields developed using floating installations with subsea wells,
however, generally have lower recovery rates than fixed platform facilities, but in terms of
value this is compensated by the cost savings.
The 1990s were a period of strong growth in the number of FPS installations with the
European and North American markets increasing rapidly while the Asian and African
markets started to emerge. Global production from FPSs reached 8.9 mboepd in 2010 up
from 8.8 mboepd in 2009, and this is expected to grow to 11.4 mboepd in 2020. Liquid
share of total production was 85% in 2010, but this share is expected to decrease towards
79% in 2020 as new deepwater gas developments come on stream.
FPS growth in recent years has been strong with the total market going from USD 6.0
billion in 2005 to USD 12.3 billion in 2008. 2009 and 2010 saw decreases in activity due to
project delays in the wake of the financial crisis, especially in the US GoM and West
Africa. Strong growth is expected to follow, taking the total FPS market to USD 25.8 billion
in 2015.
The dominant type of FPS is the Floating Production, Storage, and Offloading (FPSO)
vessel that constituted around 70% of the FPS market in 2010. FPSOs have historically
been constructed by converting tanker vessels for oil production purposes, but in recent
years there has been a shift towards purpose built FPSOs designed for given field
developments. The need for these purpose built FPSOs has arisen as a consequence of
increasingly complex developments due to deeper and deeper waters, harsher climates,
and increasingly complex subsurface and reservoir conditions.
While the FPSO has been the preferred floating production solution in most of the world,
other solutions have been applied in the US GoM, particularly Spars and Tension Leg
Platforms (TLPs). The Spar design is similar to a buoy with a long cylindrical underwater
section that ensures platform stability. A TLP has a hull similar to a floating drilling rig but
with tension legs anchoring the platform to the seabed. Semis are similar to TLPs but
without the tension legs. Semis are often used for deepwater gas developments,
particularly in Europe and Asia. One recent example of this is the Gjøa development off
Norway.
If we look at a number of longer-term trends in platform development, we can see
progression in both size and capability ( water-depth, throughput etc. ). The choice of
development option is no longer as restricted by the design capability as was often the
case during the earlier phases of deepwater development.
The key differentials that decisions now hinge more upon include amongst others :
• Dry or wet trees
• Storage requirement
• Available infrastructure
• Operator familiarity
• Field life
• Cost
• Development plan ( hub, tie-backs etc. )

www.intsok.com 2
There are currently several Floating Liquefied Natural Gas (FLNG) schemes on the
drawing board, especially in Asia and Australia. Recently, Shell made the final investment
decision on the Prelude FLNG project in Australia. The prelude FLNG design can be used
for similar developments in the future. The consortium Technip/Samsung Heavy
Engineering have entered into a frame agreement with Shell to develop up to 10 FLNG
units over a 15 year viable for development.

The global mobile offshore drilling rig fleet will surpass 800 units in 2013. During the
financial crisis few newbuilds were ordered. However, from the fall of 2010, many new
orders have been placed. This building activity has been driven by increasing oil prices
and the growing demand for offshore, and in particular deepwater, drilling activity, for both
exploration and development purposes. The global floater fleet is sufficiently large to
deliver on demand through 2014. From 2015 onwards, demand will outstrip supply unless
new rigs are built. Demand, however, depends on new acreage being awarded with
ensuing exploration, appraisal and development activities. With no new acreage awards,
the current fleet will be large enough to cover demand. However, as the world shows no
signs of slowing oil consumption and new sources are mostly found in deep waters, it is
likely that there will be a new building boom with rig deliveries beyond the time frame of
this report.

Specific characteristics
Floating units have been deployed in a number of specific offshore services to find, to
develop and to produce oil & gas. For example as mobile drilling rigs, service vessels and
oil production platforms. The most common types are:
• The semi-submersible, the SEMI is a specialized vessel with good stability and sea
keeping characteristics. The semi-submersible vessel design is commonly used in a
number of specific offshore roles such as for offshore drilling rigs, oil production
platforms - and heavy lift cranes. Dependent on its role, the semisubmersible can be
dynamically positioned or spread moored. The semi-submersible obtains its buoyancy
from ballasted, pontoons located below sea level. Structural columns connect the
pontoons and operating deck, which can be located high above the sea level – and
waves due to the good stability of the concept.
• The tension-leg platform, the TLP is a vertically moored floating structure used for the
oil & gas production in water depths normally greater than 300 meters. The platform is
permanently moored by means of group of tethers (i.e tension legs) at each of the
structure's corners. The tension leg design eliminates virtually all vertical motion of the
platform, allowing the platform to have dry wellheads and X-mas trees on deck,
connected directly to the subsea wells by rigid risers. This allows a simpler well
completion and easier access for well intervention.
• The SPAR platform is a deep-draft floating caisson, which is a hollow cylindrical
structure similar to a very large buoy. The spar relies on a traditional spread mooring
system, to maintain its position. The SPAR design is now being used for drilling and
production. The distinguishing feature of a spar is its deep-draft hull, which produces
very favorable motion characteristics compared to other floating concepts. Low
motions and a protected center-well also provide an excellent configuration for
deepwater operations.

www.intsok.com 3
• The floating production, storage and offloading unit, the FPSO, is a floating vessel
designed to receive hydrocarbons produced from nearby platforms or subsea
template, separate the oil and gas and water, and store the oil until it can be offloaded
onto a tanker. The FPSOs are particularly effective in remote or deepwater locations
where subsea pipelines are not cost effective. Generally (but not always) the flowlines
and risers are connected to a major component of the vessel, called a Turret, which
allows the vessel to weather-wane. Alternatively, in benign areas like West Africa the
FPSO can be spread moored and risers connected to the vessel at the side.
• In 2011 Shell announced the development of a Floating Liquefied Natural Gas
facility, FLNG, situated off the coast of Western Australia and is due for completion in
2017. When it is completed, it will be the largest floating offshore facility ever made.

The Norwegian based technology providers have a well established reputation and a
significant market share in the global fleet of offshore floating units and offshore service
vessels, like semisubmersibles, TLPs, SPARs FPSOs and FLNGs. In this catalogue we
present the cluster of INTSOK partners that provide products and services towards this
market. The catalogue will be used to facilitate a joint effort from Norwegian based
industry to promote the cluster capabilities towards:

• Oil companies • Major shipyards


• Engineering and EPC Contractors • Rig/ship owners

www.intsok.com 4
Contents  
1. ABB ....................................................................................................................................... 9  
2. Aker MH .............................................................................................................................. 11  
3. Aker Midsund AS ................................................................................................................ 12  
4. Aker Pusnes ........................................................................................................................ 13  
5. Aker Process Systems ........................................................................................................ 14  
6. Autronica Fire & Security .................................................................................................... 16  
7. Bergen Group DREGGEN .................................................................................................. 17  
8. Det Norske Veritas .............................................................................................................. 18  
9. Eureka Pumps .................................................................................................................... 19  
10. FMC Technologies .............................................................................................................. 20  
11. Framo Engineering ............................................................................................................. 21  
12. Frank Mohn Flatøy .............................................................................................................. 23  
13. GMC .................................................................................................................................... 24  
14. Glamox ................................................................................................................................ 26  
15. Hamworthy .......................................................................................................................... 27  
16. Hernis Scan Systems .......................................................................................................... 29  
17. IKM Group ........................................................................................................................... 30  
18. IKM Testing ......................................................................................................................... 31  
19. IMENCO .............................................................................................................................. 32  
20. Jotun Coatings .................................................................................................................... 33  
21. K. Lund Offshore ................................................................................................................. 34  
22. Kongsberg Maritime ............................................................................................................ 35  
23. Marine Aluminium ............................................................................................................... 36  
24. Marine Cybernetics ............................................................................................................. 37  
25. MPM .................................................................................................................................... 38  
26. Noreq .................................................................................................................................. 39  
27. Norlense .............................................................................................................................. 40  
28. Norsafe ............................................................................................................................... 41  
29. Novenco .............................................................................................................................. 42  
30. Oglaend System ................................................................................................................. 44  
31. PG Pump Solutions ............................................................................................................. 45  
32. ProSep ................................................................................................................................ 47  
33. Rapp Bomek ....................................................................................................................... 48  
34. Rolls Royce Marine ............................................................................................................. 49  
35. Roxar .................................................................................................................................. 50  
36. Scana Industrier .................................................................................................................. 51  
37. Sharecat Solutions .............................................................................................................. 52  
38. Siemens .............................................................................................................................. 53  
39. Simtronics / Water Mist Engineering ................................................................................... 54  
40. Thermtech ........................................................................................................................... 55  
41. TTS Energy ......................................................................................................................... 56  
42. Vector Group ....................................................................................................................... 57  
43. Westad ................................................................................................................................ 58  
44. Wilhelmsen Marine Engineering ......................................................................................... 59  

www.intsok.com 5
CAPABILITY MATRIX

Equipment & systems suppliers Drilling

Electric/ Cranes, Other


Process Rotating Safety Drilling
automation/ lifting & mechanical Services
equipment equipment equipment systems
telecom moorings equipment

ABB
Aker MH
Aker Midsund AS
Aker Pusnes
Aker Process Systems
Autronica Fire & Security
Bergen Group DREGGEN
Det Norske Veritas
Eureka Pumps
FMC Technologies
Framo Engineering
Frank Mohn Flatøy
GMC
Glamox
Hamworthy
Hernis Scan Systems
IKM Group (E.I. and Process Division)
IKM Testing
IMENCO
Jotun Coatings
K. Lund Offshore
Kongsberg Maritime
Marine Aluminium
Marine Cybernetics
MPM
Noreq
Norlense
Norsafe
Novenco
Oglaend System
PG Pump Solutions
ProSep
Rapp Bomek
Rolls Royce Marine
Roxar
Scana Industrier
Sharecat Solutions
Siemens
Simtronics / Water Mist Eng.
Thermtech
TTS Energy
Vector Group
Westad
Wilhelmsen Marine Engineering

www.intsok.com 6
Equipment & Systems Suppliers

• Electric/ Automation / TeleCom


o ABB
o Autronica Fire & Security
o Glamox
o Hernis Scan Systems
o IKM Group (E.I. and Process Division)
o IMENCO
o Kongsberg Maritime
o Scana Industrier
o Siemens

• Cranes, Lifting & Moorings


o Aker Pusnes
o Bergen Group DREGGEN
o K. Lund Offshore
o Scana Industrier
o TTS Energy

• Process Equipment
o Aker Midsund AS
o Aker Process Systems
o FMC Technologies
o Framo Engineering
o Hamworthy
o MPM
o ProSep
o Roxar
o Simtronics/Water Mist Engineering
o Westad

• Rotating Equipment
o Eureka Pumps
o Frank Mohn Flatøy
o K. Lund Offshore
o PG Pump Solutions
o Rolls Royce Marine
o Scana Industrier
o Siemens
o TTS Energy

• Safety Equipment
o Autronica
o Hernis Scan Systems
o Noreq
o Norlense
o Norsafe
o Novenco
o Siemens
o Simtronics/Water Mist Engineering
o Wilhelmsen Marine Engineering

www.intsok.com 7
• Other Mechanical Equipment
o Aker Pusnes
o Eureka Pumps
o FMC Technologies
o GMC
o IKM Group (E.I. and Process Division)
o Jotun Coatings
o Marine Aluminium
o Novenco
o Oglaend Systems
o Rapp Bomek
o Rolls Royce Marine
o Scana Industrier
o Sharecat Solutions
o Siemens
o Simtronics/Water Mist Engineering
o Vector Group
o Wilhelmsen Marine Engineering

• Services
o DNV
o IKM Testing/ IKM Group (E.I. and Process Division)
o FMC Technologies
o K.Lund Offshore
o Marine Cybernetics
o Scana Industrier
o Sharecat Solutions
o Siemens
o Simtronics/Water Mist Engineering

Drilling

• Drilling systems
o ABB
o Aker MH
o Aker Pusnes
o Aker Process Systems
o Bergen Group DREGGEN
o Frank Mohn Flatøy
o GMC
o Hernis Scan Systems
o Kongsberg Marit ime
o PG Pump Solutions
o Rolls Royce marine
o Siemens
o Thermtech
o TTS Energy

www.intsok.com 8
   
   
ABB
 
 Stein Guldbrandsøy
Global FPSO Business Manager
stein.guldbrandsoy@no.abb.com

www.abb.com

 
COMPANY DESCRIPTION
ABB is a leading supplier of the following to the offshore Oil & Gas industry:
• Power
• Automation
• Telecom solutions
Innovation through experience and proven ability to handle large projects in automation,
telecommunication and electrification including e-house distinguish ABB as a highly competent
supplier to the offshore industry.

PRODUCTS
ABB combines innovative automation, electric, telecommunication solutions and EPC know-how, for
the offshore Oil and Gas industry including fixed, floating and subsea facilities. The Portfolio specific to
market are:
• Full Electrical-Control-Instrument-Telecom (ECIT) including:
• e-House modules,
• Electrification
• Power and Energy Management,
• Power-from-shore (HVDC LIGHT),
• AC/DC Drilling Drives,
• A complete range of AC electric propulsion and thruster systems
• Azipod® Propulsion
• Integrated Operations,
• Remote Operations,
• Safety and Automation System
• Historian & Information Management
• Asset Management
• Instrumentation.

SERVICES
ABB can participate and contribute in all phases of a project from feasibility study to operation as Main
Instrument/Automation Contractor, Main Electrification Contractor, Main Telecommunication
Contractor or as combination of the above.
The actives include:
• Project Management
• Studies
• Engineering Design
• Procurement
• Configuration/Integration
• Start-up
• Commissioning
• Training
• After Market Services

www.intsok.com 9
REFERENCES
A selection only, please contact ABB for a full list of references.
• Tupi pilot FPSO – Cidade De Angara dos Reis MV22
ABB Scope of Supply:
• Design, Engineering fabrication and construction of complete E-House
• A-60 Fire Rated , ABS Certified
• Architectural design
• Redundant HVAC with pressurization
• Fire & Gas Detection system
• CO2 fire suppression system
• Complete E&I installation, termination & commissioning
• Total weight of 700 ton
• MV Switchgear
• LV Switchgear
• Integration of the above into the e-house

• Peregrino FPSO & Wellhead Platforms.


ABB Scope of Supply:
• FEED Studies for Electro and Automation
• Engineering services marine conversion
• Hullside Process and Safety Systems
• Topside Process and Safety Systems
• Power Management System
• Ex Remote I/O cabinets for PCS, PSD, ESD and F&G
• 3x24MVA Generators
• 13.8kV Switchgear
• 6,6kV Switchgear
• 440V / 220V Process Switchboard
• UPS w/batteries
• Transformers (dry immersed)
• VSD for LV
• IS Limiters
• Deliveries - Wellhead Platforms
• Integrated Process and Safety Systems
• Power Management System
• 13.8kV Switchgear
• 4.16kV Switchgear
• 380V LV
• VSD MV
• Transformers (oil immersed)

• Pioneer FPSO Cascade & Chinook - BW Offshore (BWO)


ABB Scope of Supply:
• EPC services for Automation
• Topside Process Control
• Topside Process Shutdown
• Topside Emergency Shutdown
• Vessel Emergency Shutdown
• Power Management System
• MV/LV Switchgears
• VSD system for Cargo pump
• Compressor Soft Starters

www.intsok.com 10
   
   
Aker MH
 
 
Olav Kvaale
VP Sales, Drilling Equipment
Olav.kvaale@akersolutions.com

www.akersolutions.com

COMPANY DESCRIPTION
Aker Solutions is a leading global provider of engineering and construction, technology products,
execution, service and integrated solutions. We are also a global supplier of drilling equipment,
mud equipment and complete drilling packages. We offer support through the entire process
including design, manufacturing, installation, commissioning in addition to training and drilling
lifecycle services globally. This is done without compromising either quality or focus on HSE.

PRODUCTS
Drilling equipment products and solutions:
• Complete drilling equipment packages • BOP handling equipment
• Land rig packages • Mud equipment
• Tender assisted packages • Handling tools
• Single equipment • Personnel lifting
• Hoisting systems • Drilling control and monitoring systems
• Top drivers • Control rooms and cabins
• Drill floor equipment • Simulators
• Hydraulic power units • Drilling risers
• Pipe handling equipment • Compensators and tensioners
• Deliveries in accordance with NPD, DnV, Ahcilles, •
API and other first class classification societies.

SERVICES
To secure professional support and strive to achieve customer satisfaction we operate with a 24/7
service. Technical and operational support can be provided through a team of technical customer
expeditors and a large number of highly skilled service engineers. Complex troubleshooting and
engineering capacity are supported by a team of senior engineers covering all applicable
disciplines, i.e. mechanical, hydraulic, electro, instrumentation, control system, software, structural
and calculation. All customer services are on a global basis. The main service and support centre is
located at the drilling solutions headquarters in Norway. Regional support centres are located in
Aberdeen, Houston, Macaé, Mumbai, Singapore, Dubai and Azerbaijan.

REFERENCES
Over the past years Aker Solutions has delivered several deep water drilling rig packages and has
expanded the product portfolio in that respect. We work closely with our customers to understand
their needs and provide them with drilling solutions for the future.

Rig name Rig type Owner


Central, West and East Azeri Fixed Platforms BP
Deep Water Gunashli Fixed Platform BP
Oseberg East PDQ update Mud module Statoil

www.intsok.com 11
   
 
Aker Midsund AS
 
Hugo Øyen
Sales and Market Manager
ho@mibas.no

www.akermidsund.com

COMPANY DESCRIPTION
A Lead high-tech pressure vessel supplier

PRODUCTS
• Engineering and Mechanical design
• Pressure Vessels
• ATM tanks
• LNG Tanks
• Welding and material expertise

SERVICES
• Engineering and Mechanical design
• FROSIO inspection
• NDT Inspection
• Steel fabrication

REFERENCES
• Ormen Lange Subsea Pilot Separator (SHELL/Statoil)
• GJØA Separators and Scrubbers (Statoil)
• SKARV Scrubbers (BP Norway)
• Ormen Lange Onshore plant Scrubbers (SHELL)
• Halfdan B Inlet Separator (MÆRSK)

www.intsok.com 12
   
Aker Pusnes
Torbjørn Rokstad
Senior Sales Manager, Offshore Mooring Systems
torbjorn.rokstad@akersolutions.com

www.akersolutions.com

COMPANY DESCRIPTION
Equipment and Technology company in the Offshore and Marine Industry.

PRODUCTS
• Offshore mooring Systems
• Offshore Loading Systems
• Deck Machinery
• Steering Gear
• Marine Loading Arms

SERVICES
In order to obtain optimal return of our customers’ investments we offer complete Lifecycle Service
programs. Our Operation Support Centers are strategically located world wide in order to provide
lifecycle services closer to our customers and the ultimate point of demand.

Our Lifecycle service program contains: Operation Support Centres are located in:
• Spare parts • Norway
• Repairs • United Arab Emirates
• Service • Brazil
• Maintenance • Singapore
• Overhauls • Korea
• Retro-fits • China
• Rebuilding • Gulf of Mexico (Houston)
• Inspections
• Pre-docking services
• Training

REFERENCES
P55 Petrobras Mooring System and Riser Pull-in System
Cheviot ATP Mooring System
Hai Yang Shi You 981 CNOOC Anchoring System
Perdidio Host Shell Mooring System
USAN FPSO Elf Petroleum Offloading System
TI Africa FSO/Asia FSO Euronav & OSG/MOQ Offloading System
Cidade de Santos MV20 Modec Offloading System

9 Bow Loading Systems delivered in the last two years

 
 
   

www.intsok.com 13
   
Aker Process Systems
Simonetta Brossa Hoel
Vice President – Global Business Development
Simonetta.brossa.hoel@akersolutions.com

www.akersolutions.com

COMPANY DESCRIPTION
Aker Solutions is a leading global provider of engineering and construction, technology products,
execution, services, integrated solutions and a global supplier of excellent process technology
solutions to the oil & gas industry. Our technology range covers all relevant process stages; from
the moment the stream of oil, gas and water from the reservoir enters the installation to the end
products.
The company provides specialised technologies and services through design engineering of new
systems as well as maintenance and modification of existing systems.

PRODUCTS
Customised and versatile solutions
• Systems for gas dehydration, sweetening, dewpointing, and glycol regeneration (TEG,
DEG, MEG)
• Applications for onshore, offshore and floating productions
• In-house design adapted to field conditions and specific clients needs
• MEG technology
• Process Gas Scrubbers
• Separator/Scrubber Retrofit/Troubleshooting Consultancy using CFD
• Produced Water Treatment Systems
• Sand Removal, Transport and Clean-Up Systems

SERVICES
The Lifecycle service and support team in Aker Solutions process systems unit offer Service
Agreements with focus on: Expertise, Capacity, Response time

We have identified 4 areas crucial for enabling lifecycle efficiency in our Service Agreements:

Preventative Maintenance Operational Maintenance Predictable Maintenance

● Service and ● Commissioning / start up ● Spare Part Management –


maintenance ● Regular service – Extensive identify need, ensure stock,
planning service manage need, carry out
● Training basic/extensive ● Testing/inspections replacements
● System integrity ● Modification ● Being able to plan for change
evaluation work/replacements of equipment/carry out
● Performance evaluation ● Supervision/support particular service tasks during
studies ● Re-vamps shutdowns in order to avoid
unnecessary halt in production

We also carry out extensive and customised training programmes for Mono Ethylene Glycol
(MEG)/hydrate inhibition.

www.intsok.com 14
REFERENCES

Project Client Technology


Tamar Nobel Energy MEG Regeneration and Reclamation
Greater Gorgon Chevron MEG Regeneration and Reclamation
gFLNG Shell Global Solutions MEG Regeneration and Reclamation
gFLNG Shell Global Solutions MEG Regeneration and Reclamation
Petrobras Gas 2 FPSO MODEC MEG Regeneration and Reclamation
Pluto Woodside MEG Regeneration and Reclamation
KG-D6 Reliance MEG Regeneration and Reclamation
Britannia Satellites Conoco Phillips MEG Regeneration and Reclamation
Ormen Lange Norsk Hydro MEG Regeneration and Reclamation
Shah Deniz BP MEG Regeneration and Reclamation
Åsgard B Statoil MEG Regeneration and Reclamation
Kollsness upgrade Statoil Conventional MEG Regeneration
OML-58 upgrade Total Gas Dehydration and TEG Regeneration
Umm Shaif gas injection Adma-Opco Gas Dehydration and TEG Regeneration
Plataforma PNA 2 Petrobras Sand Removal and Washing Packages
Gullfaks A/B/C Statoil Sand Jetting, Removal and Washing
Packages
South Pass 77A Chevron Sand Removal Packages
Schiehallion BP Sand Removal Packages
Kristin Statoil Sand Removal Packages
Panyu Devon Santa Fe Produced Water Treatment Packages
Al Rayaan Oxy Petroleum Produced Water Treatment Packages
Espardarte Petrobras Produced Water Treatment Packages
Draugen Shell Produced Water Degasser
Exxon Mobil ForFab Process Gas Scrubbers
KOC HEISCO Process Gas Scrubbers
Shell Shell Process Gas Scrubbers

The list above is only a selection of EPCs performed. In addition, several Concept and FEED
Studies have been performed for different oil companies.

www.intsok.com 15
   
 
Autronica Fire & Security
 
  Bjørn Willy Kjaer
  Sales & Marketing Director
  bjorn.kjaer@autronicafire.no
 
www.autronicafire.com
         

COMPANY DESCRIPTION
Autronica Fire and Security AS is a leading innovator, producer and international supplier of
advanced sensors and system for Fire & Gas Detection developed for the global petrochemical- oil
and gas industry. Since Autronica was founded more than fifty years ago, the company has paved
the way for Fire & Gas System development. Many of Autronica’s new developments have later
become a global standard like the Analogue Addressable Fire Detection System, which was
introduced to the market more than thirty years ago.

PRODUCTS
The product range includes:
• AutroSafe fire detection
• AutroSafe IFG (Integrated Fire & Gas Detection) with SelfVerify; the word’s only IEC 61508
Safety Integrity Level 2 (SIL 2) certified integrated Fire & Gas Detection System.
• AutroSafe IFG provides high-resolution diagnostic and full diagnostic and full detection
chamber self-testing and calibration every 24 hours. This reduces the maintenance cost
significantly.

Autronica offers a full range of flame and gas detectors:


• High Sensitive Smoke Detection (HSSD)
• Alarm displays
• AutroMaster colour-graphic presentation
• Alarm management and control system

SERVICES
Service offered includes:
• System design
• Project management
• Installation and commissioning supervision
• After sales service
• Training

REFERENCES
Autronica Oil & Gas Division has a comprehensive global reference list. Sample of references are:
FPSO: Drilling Vessel: Semi Submersible: Refineries:
Petrobras P51 Transocean P5903 NORBE VI Estacao
Petrobras P52 Tanker Pacific H1809 Noble Dave Beard Tout Lui Raut Refinery
Petrobras P56 Saipem H1867 Sevan Driller Mongstad
Cascade Chinook Pride 1 H1786 Sedco 711 Ras Laffan
Espirito Santos Cardiff1 H1837 Milennium Bearfield KEP 2010
Sevan Vouaguer Schahin H1870 Seadrill 13 Zuetina

www.intsok.com 16
   
   
   
  Bergen Group DREGGEN  
Morten Jervell Pettersen  
Sales & Marketing  
morten.j.pettersen@bergengroup.no  
 
www.bergengroup.no/dreggen  
 

COMPANY DESCRIPTION
BG DREGGEN is a designer and manufacturer of Marine Cranes for the Shipbuilding- and Oil and
Gas Industries. The product portfolio covers a range from engine room cranes to heavy
compensated pedestal cranes and offshore pipe- and BOP handling. Lifting capacities range from
SWL 500kg up to 400T. All products are developed in close cooperation with our clients and are
designed and manufactured according to our customer`s needs and requirements. BG DREGGEN
Cranes are manufactured in Norway, Lithuania, China and Korea and in accordance with ISO
90001 standards.

PRODUCTS
• Hose Handling Cranes • Slewing Pedestal Cranes
Gantry Cranes • Provision Cranes
• BOP and X-mas tree Cranes • Cargo Rail Cranes
• Pipe Handling Cranes • Knuckle Boom Cranes
• Riser Handling Cranes • Telescopic Jib Cranes
• Service Cranes • Electrical, pneumatic, hydraulically or
• Engine Room Cranes manually operated Lifting Appliances
• Combined Life Saving and Provision Cranes
• Active Heave Compensated Cranes

SERVICES
• Commissioning and service to equipment of our own proprietary design
• Service and re-certification on a broad variety of lifting equipment.
• Modifications
• Refurbishment
• Upgrades to old and outdated equipment
• General maintenance

Represented by Agents and Associated Partners on numerous locations worldwide, assistance


may be provided for most relevant applications. A variety of Service Agreements to contribute to
reliability and extended operational lifetime for equipment delivered is an available and optional
added value.

REFERENCES
• Aker MH
• Maersk Oil & Gas
• Seadrill
• Havila
• Sevan
• Frigstad
• Statoil
• Odfjell Drilling

www.intsok.com 17
   
   
   
  Det Norske Veritas  
 
Carl Arne Carlsen  
Director of Operations  
Carl.Arne.Carlsen@dnv.com  
 
www.dnv.no

COMPANY DESCRIPTION
DNV (Det Norske Veritas) is an independent foundation with the purpose of safeguarding life,
property, and the environment. Our core competence is identifying, assessing, and advising on how
to manage risk. Whether we classify a ship, certify an automotive company’s management system,
or advise on how to best maintain an aging oil platform, our focus is to safely and responsibly
improve business performance.

Managing risk
As a leading international provider of services for managing risk, the point of managing risk is not
necessarily to eliminate risk, but to have an overview of the most critical risks and manage them
professionally. DNV’s technology understanding blended with competency within risk management
has been used to assess, evaluate and manage the risks involved in numerous high-profile projects
around the world.

An international partner
Headquartered in Oslo, Norway, DNV has worked internationally since 1867 and has established
approximately 300 offices in 100 countries. As a knowledge-based company, our prime assets are
the creativity, knowledge, and expertise of our 9,000 employees from more then 85 different
nations. While many of our services, such as management system certification and corporate
responsibility, can be applied successfully in any industry, our main focus industries are:
• Maritime • Food and beverage
• Oil, gas and energy • Health care

PRODUCTS

• Classification
• Plan approval
• Certification of Material & Equipments
• Fabrication Survey
• Offshore Survey

REFERENCES
• Classification maintenance of 20 offshore floating units operating in Brazilian waters
• Verification services
o Structural & Hydrodynamics
o Stability
o Subsea installations
• Risk analysis
• Enterprise risk management

www.intsok.com 18
   
   
Eureka Pumps
 
Tom Gustavsen
Sales Manager, International Sales
tom.gustavsen@eureka.no

www.eureka.no
 
 
COMPANY DESCRIPTION
Eureka Pumps is a technology supplier with long experience from the oil & gas market. We
represent some of the world’s leading suppliers within a number of products ranges and invest
considerably in developing our own technology.

We customise turnkey solutions for pumps, valves, instrumentation, automation, monitoring, fire &
gas detection, fire & gas systems, extinguishing system, advanced surface treatment and
maintenance. Eureka has 550 employees.

PRODUCTS
Main applications:
• Firewater Pump Systems
• Seawater Lift Pumps
• Cargo Pump Systems
• Crude Oil Export Pumps
• Process & Utlility Pumps
• Produced Water Pumps
• Water Injection Pumps

SERVICES
Eureka’s Sales Department assists customers in making the correct selection of equipment for the
different pump applications, and offer cost-effective solutions at the highest level of quality.

Eureka also offers spare parts and after sales service, and can perform advanced maintenance,
upgrading, modifications, installation, testing and other services related to pump operation.

REFERENCES
• Skarv Idun
4 off Fire Water Pump Packages with each dedicated 2.8 MW diesel driver.
Client: Samsung Heavy Industries
Operator: BP Norway.
• Skarv Idun
2 off SWL Pumps with 11 kV electric submersible motors.
Client Aker Solutions
Operator: BP Norway.
• Valhall Re-development
3 off Line Shaft SWL Pumps.
Client: Mustang Engineering
Operator: BP Norway.

www.intsok.com 19
   
 
FMC Technologies
 
 
Flemming
  Sørensen
Europe
  Sales Manager
Flemming.sorensen@fkm.fmcti.com
 
 
 
www.fmctechnologies.com/measurementSolutions
 

COMPANY DESCRIPTION
FMC Technologies Measurement Solutions is the market leader in the design, manufacture and
supply of measurement products for the worldwide oil and gas industries.
FMC engineers have developed solutions that overcome the oil and gas industry's most difficult
measurement obstacles. Through a deep understanding of the industry, unmatched product and
system knowledge and the highest standards for performance, FMC Technologies Measurement
Solutions puts the most daunting measurement challenges within reach. With over 2,000 installed
projects in over 100 countries worldwide, FMC Technologies has unparalleled expertise in
designing and constructing diverse liquid and gas systems that meet the needs of its customers.
Our engineers and project management staff are experts, many with decades of experience in the
measurement industry, and offer complete support at every phase of the project's development.
Whether a project necessitates language translations, compliance with non-standard regional
practices or project commissioning in remote locations, FMC's project teams have the know-how to
solve any measurement system challenge.

PRODUCTS
FMC provides total Measurement solutions, including:
• Inline LNG flow measurement • Metering for all phases of test separators
• Gas export and gas re-injection • Complete test separators including metering
• On line Gas analysis • Installation, Commission, Service and
• Fuel gas Maintenance
• Flare gas • Multiphase metering, typically for well testing
• Metering Control Systems
• Continuous and batch liquid metering. Export (Custody transfer) metering on liquid (Crude,
condensate)

SERVICES
As the global leader in custody transfer flow measurement, FMC Technologies now offers our
consolidated Measurement CARE program: a comprehensive service that can be tailored to fit our
customer's exact needs. Measurement CARE helps to ensure the accuracy, reliability and
regulatory compliance of all measurement systems, regardless of manufacturer, throughout the
equipments' life cycle.

REFERENCES
FMC Technologies Measurement Solutions has supplied more than 2,000 Measurement Systems
installed in over 140 Countries and designed to all International & Domestic Measurement
Requirements.

Please contact us if you would like more information about these projects.

www.intsok.com 20
   
 
Framo Engineering
 

Per K. Skiftesvik
Sales Manager Swivels & Marine Systems
pks@framoeng.no

www.framoeng.no
 

COMPANY DESCRIPTION
Framo Engineering AS is a Norwegian company located in Bergen, Norway. The main product
offerings are within the oil and gas sector for subsea pumping, multiphase and wet gas metering
and fluid transfer systems for floating production and loading. In addition the offering includes after
market services for technical support, repair and maintenance. The staff includes 350 highly skilled
people.Framo Engineering has international operations for sales and customer support in Houston,
Aberdeeen, Kuala Lumpur, Rio de Janeiro, Angola (under development) and Western Australia.

PRODUCTS
Framo Engineering’s main products are offered from the three following segments:

• Pumps and Subsea Systems


• Multiphase Metering Systems
• Swivels and Marine Systems

The Swivels and Marine segment includes the following main products:
• Swivels and Turret Systems (for FPSOs, FSOs and FLNGs)
• Offshore Cryogenic Transfer Systems (for FLNGs)
• Oil Loading Systems

SERVICES
Customer support services for aftermarket including technical support, production support and
service and repair services

www.intsok.com 21
www.intsok.com 22
   
 
Frank Mohn Flatøy
Frode Hjelmeland
Sales Manager
fh@framo.no

www.oilandgas.framo.no
 
 
COMPANY DESCRIPTION
Frank Mohn Flatøy AS is the production facility for the oil & gas, and environmental activities within
the Frank Mohn Group of companies.

In the international oil and gas industry we are recognized as a leading designer, manufacturer and
supplier of complete pumping systems for both onshore and offshore applications, and for
production of offshore oil recovery systems. All our products are factory tested and delivered to our
customers ready for operation in the field.

Frank Mohn Oil & Gas is dedicated to providing our customers with world class reliable pumping systems
engineered to meet their needs, both offshore and onshore. When your business needs a lift, talk to Frank
Mohn Oil & Gas.

PRODUCTS
Offshore and onshore pumping systems:
• Electric submersible pumps, for sea water lift, crude cavern, fire water service etc.
• Fire Water Pumps, hydraulic and electrical driven
• Water Injection Pumps

Environmental products:
• TransRec oil recovery system
• Skimmers
• Emergency Off-loading
• Remote Off-loading of Sunken Vessel

SERVICES
• Aftermarket services
• Engineering support

REFERENCES
• 51 off Fire water pump systems
• 28 off Electric submersible pumps
• 12 off Water injection pumps
• 12 off Transrec Oil recovery systems

www.intsok.com 23
   
 
 
GMC
Kenneth Abrahamsen
Department Manager
ka@gmc.no

www.gmc.no
 

COMPANY DESCRIPTION
GMC HVAC has been a major HVAC supplier to the Norwegian Oil & Gas market since 1988. The
company is involved in large installation projects, offshore maintenance and modifications, and the
supply of ductwork and equipment.

GMC HVAC is currently employing a total of 50 skilled people with10 experienced HVAC engineers,
29 technicians/ operators where 22 have offshore certificates and experience. Our document/
document control centre currently occupies 4 persons. Our goal is to be the preferred supplier of
HVAC services for new and existing installations on the offshore market.

The culture of the company are characterized by continual work for improvement, achieved through
coordination of expectations and requirements from customers, employees, authorities and owners.

GMC HVAC is part of the GMC Group consisting of 6 companies offering services and product to
the oil and gas-, and shipping industry. The group are currently employing approximately 230
persons. When in need of a partner or supplier with the highest level of experience in providing
HVAC solutions to the oil and gas industry, GMC HVAC is an excellent choice. Our Quality System
is certified according to NS-EN ISO 9001:2008 manufacturing/supplying following products/
services: Engineering, equipment delivery, installation and commissioning of HVAC systems.

Our quality policy shall be carried out by having focus on quality, communication with customer and
ability to deliver. Achilles registration no. 950093617 Id. 15391

PRODUCTS
GMC HVAC delivers a full range of HVAC, cooling and refrigeration equipment, and is expert on
bespoke products for harsh environments, for example our own in-house developed air conditioning
systems, Simvent, delivered to rigs worldwide. In our workshop we have specialized in stainless
steel, and manufacture welded ductwork and plate constructions according to our customers’
specifications. Our duct system, Simduct® is manufactured in accordance to ISO15138, and can
many times be an excellent alternative saving both weight and installation time compared to
conventional welded ductwork.

SERVICES
GMC offers a full range of HVAC related services, our scope of delivery can include engineering,
equipment delivery and installation of new HVAC systems, or maintenance troubleshooting, repairs
and modifications on existing HVAC installations, cooling and refrigeration plants.

An important aspect of our contracts is also to take responsibility for commissioning and
documentation.

www.intsok.com 24
REFERENCES
Our company has been in the HVAC business for 22 years. Our current turnover is around NOK
150 mill./year. This list represents some of the HVAC projects undertaken during this period.

Project Client Scope


Veslefrikk Aker Commissioning
Åsgard A Aker Construction/ Commissioning
Åsgard B Rosenberg Construction/ Commissioning
SIRI Kværner Rosenberg Construction/ Commissioning
Kvitebjørn Vetco Aibel / Leirvik sveis EPCI
Kristin Vetco Aibel Equipment/Constr./ Comm.
Snorre B Aker Kværner Stord Construction/ Commissioning
Oseberg Sør Aker Kværner Stord Construction/ Commissioning
Grane Aker Kværner Egersund Construction/ Commissioning
Ekofisk PPCoN Construction/ Commissioning
Ormen Lange Hydro Equipment/Constr./ Comm.
Troll A Precompression Vetco Aibel Equipment/Constr./ Comm.
Troll A EDS module Vetco Aibel Equipment/Constr./ Comm
Snøhvit Statoil Equipment/Constr./ Comm.
Kashagan Barge 9 Aker Solutions Construction/ Commissioning
Sleipner Aibel Construction/ Commissioning
Alvheim Aibel Equipment/Constr./ Comm.
Aker H6 Rigs Aker Solutions Equipment/Constr./ Comm.
COSL Mud Modules National Oilwell Norw. HVAC Equipment/engineering
COSL Mud Modules AS Nymo . Construction/ Commissioning
Toll A LQ Extension Aibel Construction/ Commissioning
Kashagan Barge 10 RR Offshore Ductwork/Equipment supplies
Tyrihans Reinertsen AS Air Handling units/Equipm.
Statfjord C MPA Aker Solutions Equipment/Constr./ Precomm.
Gjøa LQ Apply LMT Construction/ Commissioning
Gjøa Topside Aker Solutions Construction/ Commissioning
Oseberg C Mud syst. Aibel AS Air Handling units/Equipm.
Island Innovator Maracc ASA HVAC Equipment/engineering
Kashagan Hook-up Aker Solutions Ductwork/Equipment supplies
Kollsnes KOP Aker Solutions Procurement/Constr./Comm.
Kashagan Mod. M11-M12 Aker Solutions Ductwork/Equipment supplies

www.intsok.com 25
   
   
Glamox
   
Svein Eide
Director Oil & Gas
 info.gi@glamox.com
 
 
www.glamox.com
 
COMPANY DESCRIPTION
Glamox Global Marine & Offshore is one of the world`s leading suppliers of light and lighting solutions to
the global marine and offshore markets. The company`s business area is represented globally through
its own sales companies, agents and distributors, and it has own sales units in Norway, Germany,
Finland, Singapore, China, USA, Korea and Canada.

PRODUCTS
Exterior lighting (topside & hull part)
Explosion proof and safe zone
Floodlight and fluorescent type
Standard & Emergency light
Interior & accommodation
Control rooms & technical rooms
Accommodation & Galley/Mess & Public rooms
Explosion proof and safe zone
Designated areas
• Searchlight
• Navigation Lights
• Helideck lights
• Hopital lights
• Signal lights

SERVICES
• Complete package supplier for lighting and related equipment for Marine & Offshore
• Light calculation programme in Optiwin 3D (three dimensional system)
• World wide network for after sales & services
• Local agents and/or distributors world wide.

REFERENCES
• Mongstad and Kollsnes refineries (Statoil Norway)
• 2 units Aker Drilling 6th generation Semi-submersible
• 3 units Stena Drillmax drillship at Samsung
• 3 units Sevan FPSO at Yantai Raffles, Sevan Piranema, Sevan Hummingbird, Sevan Voyageur
• P-53 Petrobras conversion at Keppel Fels
• Maersk Explorer built at Keppel Fels
• Citade De Vitoria convertion at Dubai Drydocks
• Gene House, Noble Drilling built at Lamprell

www.intsok.com 26
   
 
 
Hamworthy
 
 
 Tore Lunde
 Managing Director
 tlunde@hamworthy.com
 
www.hamworthy.com
 

COMPANY DESCRIPTION
Hamworthy plc is a market leading global company developing and supplying specialist equipment
and services to the marine, oil & gas and industrial sectors. Hamworthy employs around 1000
people worldwide and is listed on the London Stock Exchange’s Alternative Investment Market. Our
solutions for the oil & gas industry benefit projects in every stage of development, from exploration
and drilling through to production and transport, including fixed and floating production platforms,
shuttle tankers, and onshore facilities.

Hamworthy Oil & Gas Systems is a 100% owned subsidiary of Hamworthy plc and is a leading
designer, developer and manufacturer of advanced fluid handling systems for ships as well as for
onshore and offshore oil & gas facilities. This includes technologies for cargo handling on LPG/LEG
carriers and LPG FSO/FPSOs, VOC recovery for crude oil tankers and terminals, onshore LNG
production, shipboard LNG re-gasification and fuel systems, LNG boil-off gas reliquefaction, and
liquefaction and processing of associated and stranded gas (FLNG and Zero Flaring).

PRODUCTS
Hamworthy supplies products and systems to a variety of projects including oil FPSOs and FSOs,
seismic vessels, drillships, semi-submersibles and jack-up rigs, production test ships, LPG FPSOs
and FSOs, floating and land-based LNG liquefaction and regasification terminals, shuttle tankers,
intervention vessels, pipe layers and crane vessels. Hamworthy products and systems for the oil &
gas industry include:

• Deep well pumps • Hydrocarbon gas compressors


• Engine room pumps • Inert gas systems
• Exhaust gas cleaning • LNG fuel systems
• Fire water pumps • LNG liquefaction
• Flare gas recovery • LNG regasification
• Floating LNG liquefaction • LPG cooling
• Fresh water generators • LPG & ethylene reliquefaction
• Hydrocarbon blanketing • Nitrogen generators
• Pump room systems • Oil and water separation VOC recovery
• Riser tensioning compressors • Wastewater treatment
• Ship design & consultancy
• Zero flaring systems

Hamworthy Oil & Gas Systems has been developing its technology for Floating LNG (FLNG) since
2005 and has gained a unique position in the FLNG market by having extensively proven its

liquefaction technology in offshore environments. The current status for FLNG in Hamworthy Oil &
Gas Systems can be summarized as follows:

www.intsok.com 27
• FLNG liquefaction processes based on nitrogen expander
technology proven from onshore and marine applications.
• Achievable specific power consumption of the Hamworthy nitrogen cycle liquefaction
processes is lower than 0.35 kWh/kg net LNG produced.
• The majority of current FLNG prospects in Hamworthy are within the 0.5 to 2.0 MTPA net
LNG production range.

SERVICES
Hamworthy offers the know-how and resources necessary to serve oil & gas projects throughout
their lifecycles. We can engage from early phase studies, and our commitment does not end when
we put our installations into service. On the contrary Hamworthy Services offers a global network
with a growing service engineer resource. We have sales and service centers throughout Europe,
Asia, the Middle East and North America, and customers also benefit from our extensive network of
agents and distributors in more than 50 countries.

REFERENCES
The products and systems that make up Hamworthy’s portfolio for the oil & gas sector amount to
hundreds of project references delivered over several decades. Detailed reference lists for any
products or systems are available upon request.

Hamworthy Oil & Gas Systems has more than 45 years of gas system delivery references of liquid
gas cargo handling systems including:

• LPG reliquefaction plants for gas carriers: 192

• LPG Heaters and vaporizers for gas carriers: 311

• LPG cooling plants for FPSO/FSO: 4

• LNG heat exchangers for gas carriers: 18

• LNG reliquefaction plants for gas carriers: 35

• LNG regasification plants for floating terminals: 4

• Turnkey onshore LNG production facilities: 3

• VOC recovery systems for oil shuttle tankers: 9

Within FLNG Hamworthy has executed several pre-FEED contracts and been an integral part of
Approval in Principle by several classification societies.

www.intsok.com 28
   
 
 
Hernis Scan Systems
Jan Kleivene
Area Sales Manager
 
jank@hernis.no

www.hernis.com
 

COMPANY DESCRIPTION
HERNIS Scan Systems AS are a world leader within high quality Closed Circuit Television (CCTV)
systems for hazardous and corrosive environments.
HERNIS can offer a comprehensive CCTV package, covering the following:
• assessment of the client’s needs
• initial design
• engineering
• manufacturing
• installation and testing
• supply of detailed documentation to the customer
We are geared towards tailor-made system designs based on specific project demands. Our
employees have extensive experience in project development and are uniquely qualified to provide
oil industry engineering companies and operators with advice on CCTV systems. The systems are
well documented and supported, and are supplied to discerning customers all over the world.

PRODUCTS
• Complete CCTV systems
• Explosion proof cameras with all relevant certification, incl INMETRO
• Advanced analytics systems, such as oil spill detection

SERVICES
• Engineering
• Manufacturing
• Testing
• Installation supervision
• Commissioning services
After sale services throughout the lifetime

www.intsok.com 29
   
   
IKM Group
   
Alf Egil Stensen
International Business Director
Alfegil.stensen@ikm.no
 
www.ikm.com

COMPANY DESCRIPTION
IKM- Electrical Engineering, Instrument and Process Division is a group of 9 companies out of
totally 27 companies within the IKM Group. This division has become a major specialized supplier
of the following to the Oil and Gas and the Marine industry:
• Electrical Engineering
• Instrumentation Calibration
• Rental and Sales of Instrument products, Valves and Systems
The companies are located in Norway and internationally in UK, Singapore and Malaysia.
IKM Testing has extensive experience from large scale projects (including FPSO’s, drilling ships
and rigs) and has performed its services in all parts of the world.

PRODUCTS
• Large selection of Marine and Oil &Gas Process Instrumentation Products
• Chemical injection metering valves - SkoFlo
• Rental equipments, pumps, instruments, logging
• Subsea motors

SERVICES
• Accredited Calibration of Instruments, field and lab - Electrical, Pressure, Temp,
Mechanical
• PSV Calibration
• Meter Prover calibration
• Condition Monitoring and analysis of process and rotating equipment
• Rental Service
• Aftermarket Care, Service and Repair

REFERENCES
Detailed reference list is available upon request.
We work with all the major oil and Gas Companies and the major players within the marine
Industry.

www.intsok.com 30
   
   
IKM Testing
   
Jens Bolme  
Sales Manager
Jens.Bolme@IKM.no

www.ikm.com

COMPANY DESCRIPTION
IKM Testing, with 700 employees, is a company within the IKM Group and is a major supplier of
inspection-, testing-, cleaning and mechanical completion services both to the onshore and the
offshore industry.
IKM Testing has its head office at Sola, Norway, and international departments in UK, Canada,
Spain, Singapore, Australia and Kazakhstan. IKM Testing has extensive experience from large
scale projects (including FPSO’s, drilling ships and rigs) and has performed its services in all parts
of the world.

SERVICES
Topside & Maintenance Services
• Nitrogen services • Hot oil flushing
• Pipe freezing • Maintenance heat
• Video inspection exchangers
• Pressure testing • Certification of accumulators
• Hydrojetting • HVAC cleaning
• Bolt working services • Dry ice cleaning
• Cold cutting/cutting services • Decommissioning/passivatio
• Pipe labeling/flow coding n
• Drying/air treatment • Preservation
• Chemical cleaning • Tank cleaning

Subsea Pre-Commissioning Services


• Subsea spools
• Pipeline services
• Umbilical testing services

REFERENCES
A complete reference list (over 500 pages) is available upon request.

FPSO’s
Skarv FPSO Golar Spirit FSRU
BW Cidade de Sao Vicente FPSO Terra Nova FPSO
Vincent FPSO Corallina Northern Endeavour FPSO
Polvo FPSO Laminaria Northern Endeavour FPSO
Umuroa FPSO

Drilling Rigs
Aker Barents (largest semi-submersible rig in the world)
Aker Spitsbergen largest semi-submersible rig in the world)
Discoverer Clear Leader
Discoverer Americas
Discoverer Inspiration

www.intsok.com 31
   
   
IMENCO
   
Kjartan Vartdal  
Business Development manager
kjv@imenco.no

 www.imenco.no

COMPANY DESCRIPTION
Imenco is a major sub-contractor to the maritime industry. We design, develop, and produce a wide
range of products within Lifting & Handling, Subsea cameras and tools, surveillance systems and
helicopter refueling units. 30 years of experience gives our customers added valuable and smart
solutions. Our engineering team is specialized in the area of mechanics, hydraulics and electronics
engineering. We provide services for some of the world leading oil and drilling companies. Imenco
is approved by Achilles and DNV, holding a Quality Management System Standard, according to
NS-EN ISO 9001 : 2000

PRODUCTS
• Subsea Guiding Systems & Products • Aviation Fuel Systems
• Special Subsea Tools • Surveillance CCTV
• Lifting & Handling • Diving Systems ( N.U.T )
• Subsea Cameras, lights and laser

SERVICES
• Personnel for Ship and Industry
• Catering services
• Engineering

REFERENCES

• Imenco is awarded a contract by Deawoo Shipbuilding & Marine Engineering Co. Ltd.
(DSME). The contract includes design and manufacturing of a complete Helicopter
Refuelling Package, and the system shall be installed on the Pazflor FPSO.
• Imenco has been awarded a sub-contract to Aker Solutions for the delivery of equipment
to a Pusnes riser pull-in system™ for Petrobras Rigg P-55. Imenco will supply 73 blocks
and sheaves with different framing, one type for WLL 350 Tons and a smaller type for WLL
120 Tons. The contract has a value of approximately MNOK 20 and will be delivered in July
2010. This is a typical engineering task where we can use our 40 years of lifting
experience. "The job will occupy 3 engineers for approximately one year", says Martin
Tveitnes, Manager at Imenco Bergen Branch.

www.intsok.com 32
   
   
Jotun Coatings
   
Frank Nordby  
Marketing Director
Frank.nordby@jotun.no

www.jotun.com
 

COMPANY DESCRIPTION
The Jotun Group is one of the world's leading manufacturers of paints, coatings and powder
coatings. Jotun has 74 companies and 40 production facilities and is represented in 80 countries.
Jotun's operations cover development, production, marketing and sales of various paint systems
and products to protect and decorate surfaces in the residential, shipping and industrial markets. In
2009 the Jotun Group had a total sales income of NOK 12 814 million, and has today 7 400
employees.

PRODUCTS
Jotun is a leading manufacturer and supplier of high performance coatings. Specialities are
corrosion protection and passive fire protection of steel as well as protection and decoration of
concrete and advanced antifouling technologies. We offer a wide range of products coupled with
expert advice and guidance in selected business areas:
• Energy
• HPI (Hydrocarbon Processing Industry)
• Infrastructure (airports, buildings, bridges)
• Offshore
• Drydock
• SeaStock
• Tankcoatings
• Newbuildings
• Waterballast tanks

Throughout the lifecycle of the vessel, Jotun is on hand to give technical advice and assistance so
that you achieve the most effective and economic coating protection and performance. Jotun
products have been proven in use in every sea and ocean of the world, supported by an unrivalled
standard of technical service. The Jotun range og coatings offers protection for ever part of every
vessel, large or small, in service, in any trade, around the world.

SERVICES
• Certified coating advisors
• More than 600 coating advisors around the world
• High level of education and experience

REFERENCES
Jotun Coatings is a leading Global supplier.
For references contact your nearest Jotun office.

See www.jotun.com

www.intsok.com 33
   
 
K. Lund Offshore
 

Robert Nielsen  
VP Compressors  
rni@kl-offshore.no  

 www.kl-offshore.no

COMPANY DESCRIPTION
K.LUND Offshore is a strong and dependable supplier of compressors and lifting equipment for the
Norwegian and international oil and gas industry. We reside in Sola, Norway, where we
manufacture the following according to the oil-companies specifications:
• Compressors
• Air dryers
• Winches
• HPU
• Air hoists

PRODUCTS
• Compressors and dryers for air and gas
• Air and hydraulic winches and HPU’s
• Air and hydraulic hoists
• Rental of winches, hoists and compressors

SERVICES
• Service and certification of lifting equipment in workshop and offshore
• Service of compressors in workshop and offshore

REFERENCES
• Supplied Instrument and plant air compressors and dryers to P50
• Service contract on 5 Petrobras platforms for service of winches and HPU’s

www.intsok.com 34
   
   
Kongsberg Maritime
   
Lars Kristian Moen  
Regional Manager Americas, Sales & Marketing
lkm@kongsberg.com

www.km.kongsberg.com
 

COMPANY DESCRIPTION
Kongsberg Maritime delivers the following products and systems to merchant vessels and offshore
installations:
• dynamic positioning
• navigation
• automation
We also supply products and systems for:
• seabed surveying
• surveillance
• training simulators
• fishing vessels
• fisheries research
For more information: www.km.kongsberg.com

PRODUCTS
Our products are designed for performance and given quality to last.
Common and consistent user interfaces across system borders save time, and increase operator
accuracy. Shared base technologies make fewer spare parts necessary and system support
simpler.

SERVICES
• Support centers at strategic locations around the world.
o All work is carried out under supervision of an account manager who works closely
with you to optimize system performance. Under his direction, using local inventory
of spare parts, our well-qualified field engineers help you quickly and efficiently.

REFERENCES
• 200-230 vessels in Brazil with KM equipment
o Delivered products and systems to shipbuilding in Brazil (AHTS, OSV, rigs,
FPSOs, tankers)

www.intsok.com 35
 
 
Marine Aluminium
 
Arild Frøkedal
Sales Director
arild@m-a.no
 
www.m-a.no  
   
 

COMPANY DESCRIPTION
Marine Aluminium AS (MA) is one of the world’s leading companies within engineering, design and
fabrication of aluminium structures and products for the offshore and shipbuilding industry.
MA has more than 50 years experience working with aluminium, with particular competence in the
fields of material technology, extrusion tooling and welding techniques.

PRODUCTS
• Helideck for Offshore vessels, semi subs and platforms
• Offshore Access Systems, telescopic bridges
• Railing systems
• FlexiBarrier, protection of personnel and equipment
• Stairs and Walkway systems
• Dropped Object Protection
• Modules/containers purpose built for accommodation, offices, workshops and storage

SERVICES
• NDE services
• Inspection
• Maintenance
• Modifications

REFERENCES
• P-47 Helideck for FSU, Petrobras
• P-35 Helideck for FPSO, Petrobras
• P-33 Helideck for FPSO, Petrobras
• P-31 Helideck for FPSO, Petrobras
• P-26 Helideck for SemiSub, Petrobras
• Cairu Helideck for FPSO, Petrobras
• P-18 Helideck for SemiSub, Petrobras
• P-23 Helideck for SemiSub, Petrobras

www.intsok.com 36
   
 
Marine Cybernetics
 
Jan-Tore Ervik
Sales Manager  
jte@marinecyb.com  
 
www.marinecybernetics.com
 

COMPANY DESCRIPTION
Marine Cybernetics tests control systems to secure safe and reliable operations of ships and
offshore installations. Its test methods result in significant savings for yards, ship owners,
contractors and oil companies compared to traditional testing of control systems. Marine
Cybernetics utilize a simulator based test technology, known as Hardware-In-The Loop (HIL)
testing to thoroughly test control system software.

PRODUCTS
Marine Cybernetics offers HIL testing for the following systems:
• Dynamic positioning systems
• Power management systems
• Steering, propulsion and thruster control systems
• Drilling control systems
• Crane control systems
• Integrated automation systems

SERVICES
Benefits of HIL testing include:
• Safety
The overall goal is to achieve safer operation with fewer costly incidents due to software
errors
• Earlier, deeper and broader
Extensive testing early in the design and engineering process makes it possible to detect
unfavorable software solutions and initiates the necessary corrections
• Gentle testing
Less use of potentially destructive testing by using simulator technology instead of pulling
out cables during FMEA testing, and by simulating scenarios that are dangerous, difficult or
costly to reconstruct in real life
• Cost reduction
Overall cost is reduced both during the new-building or upgrade phase, and also during
operations due to less software errors
• New market standard
Oil companies have put HIL testing into their requirements for new charters

REFERENCES
• Stena Drilling
• Bourbon
• Farstad
• Maersk
• Odfjell
• Sevan

www.intsok.com 37
   
   
   
MPM  
Bjørn Lorentz Pedersen
Sales Director
blp@mpm-no.com

 www.mpm-no.com

COMPANY DESCRIPTION
MPM (Multi Phase Meters) is advancing multiphase and wetgas metering to new levels, to satisfy
our customer’s needs and requirements. MPM is headquartered in Stavanger, Norway, and is a
subsidiary of FMC Technologies.
MPM supplies HighPerformanceFlowmeters that accurately measure multiphase and wetgas flow
(oil, gas, water) at topside and subsea facilities. MPM sets its pride in supplying products
that provide consistent high accuracy in real life applications.
MPM aims to serve customers in all relevant regions of the world and with this in mind has located
sales and service centers in Dubai (UAE), Houston (USA), Milan (Italy) and Singapore. MPM
subsea projects are managed from Kongsberg, Norway.
MPM's patented technology platform as well as the MPM meter was developed and qualified in a
close co-operation with 6 major oil companies.

PRODUCTS
The MPM HighPerformanceFlowmeter is made to measure the oil companies’ most valuable asset.
It works, it’s accurate, it’s easy to use and it’s self-calibrating.
• Topside: Topside MPM meters can be installed at onshore and offshore sites. They are
ideal for allocation metering, well testing and serve as important tools to help increase oil
and gas production. They can be used instead of test separators, and be equipped with all
of the unique features offered by MPM, like Dual Mode (combined wetgas and multi phase
meter), water salinity measurement (automatic field configuration), Droplet Count and In-
Situ verification.
• Subsea: MPM’s subsea meter encompasses all the features of the topside meter. It has a
uniquely simple field configuration procedure, without the need of any subsea sampling. It
has been designed and qualified for use at water depths of up to 3 500 m (10 000 feet), at
operating pressures of up to 1 000 bar (15 k psi) and at operating temperatures of up to
250 °C (480 °F).

SERVICES
MPM recognizes the importance of dedication and long term commitment towards our customers.
The organization is finely tuned towards performing high quality worldwide service and support. The
high emphasizes we put on this is reflected in our excellent customer satisfaction score.
With the highest standards in all aspects of a commitment and a “hands-on” attitude, the people at
MPM find the greatest pleasure in exceeding our client expectations on all levels.
MPM offers a range of services related to. Training of operators and field personnel
• Testing in MPM’s full-scale flow loop • Operational Integrity services with In-
• Installation, commissioning and start- Situ verification
up assistance
• Studies of metering applicability and
design

REFERENCES
MPM has successfully delivered meters to a large number of projects around the world, operated
by BSP, Chevron, ConocoPhillips, Dong, NI, Esso, PDO, Petro Canada, Shell, Statoil, Total.

www.intsok.com 38
   
   
Noreq
   
Trond Paulsen  
Sales Director
tron@noreq.no

www.noreq.no
www.
 

COMPANY DESCRIPTION
Noreq AS develops and manufactures modern lifesaving products and supply related service and
spare parts. We have a global presence through associated companies and agents.

PRODUCTS
Noreq's new Torpedo lifeboat and an advantageous davit concept is a result of our product
development process and have achieved great response in the market.
Lifeboats
• Torpedo lifeboat
• Freefall lifeboats
• Enclosed lifeboats
• Partially enclosed lifeboats
Rescue boats
• Fast rescue boats
• Rescue boats
Davits
• Rescue boat davits
• Ship davits
• Rig davits
• Free-fall davits

The Noreq series of lifeboats and rescue boats is designed and approved in accordance with the
latest amendments to the international SOLAS regulations, the LSA code European Union Council
Marine Equipment Directive (MED 96/98 EC) as well as the rules of the world’s major classification
societies. Test results of the Torpedo lifeboat satisfy the new lifeboat requirements defined by the
Norwegian Oil Industry Association OLF. All davits fully comply with the latest SOLAS requirements
and LSA Code. The equipment will be certified by Bureau Veritas in accordance with European
Council Directive 96/98 EC on Marine Equipment (M.E.D).

SERVICES
Noreq has trained and authorized service personnel ready to assist worldwide with all Noreq
supplied equipment. We offer a spare parts system for our products, which is designed to ensure
our customers quick and safe delivery.

REFERENCES
• Alianca Shipyard
• DOF Brazil
• Saipem
• Msillic
• Acergy
• Conoco Philips
• Global Industries Brazil
• StatoilHydro

www.intsok.com 39
   
   
Norlense
   
Trond Helge Hansen  
Export Manager
trond@norlense.no

www.norlense.no
 

COMPANY DESCRIPTION
NorLense AS is one of the world’s leading companies within the development and production of oil
booms. The company’s main products are shore, coastal and offshore oil booms, and inflatable
tents. Its collaboration agreement for complementary equipment makes the company a total
supplier of oil spill recovery equipment. The company has in the course of 35 years developed
significant expertise and an excellent reputation within oil protection, preparedness and training.

PRODUCTS
Self-Inflatable Boom Systems
• The NorLense R and S series of oil containment booms are single-point inflation booms
with automatic inflation that are one of a kind in today’s market.
• Self-inflation implies no crew members in front of the winder during deployment and
recovery. This alone represents a major contribution to HSE as the risk of incidents is
dramatically reduced.
• NorLense has proven up to 95% recovery rate in full scale tests offshore. NorLense are the
main supplier to NOFO

SERVICES
NorLense has long experience in installation, training courses, reporting and running training
• Petrobras
• Statoil
• Finarge
• Farstad
• Shell
• ExxonMobile
• ConnocoPhillips

www.intsok.com 40
   
   
   
Norsafe  
Kjell Sørensen
Vice President Contract, Sales & Marketing
Kjell.soerensen@norsafe.com

www.norsafe.no

COMPANY DESCRIPTION
Norsafe AS is a world leading manufacturer and supplier of Lifesaving Appliances. Our company
headquarter is located in Arendal, Norway, and we have subsidiary companies in Greece, China,
Singapore, Korea, Japan, Mexico and USA. Norsafe has an extensive Service Network with more
than 50 service partners in addition to our own service stations at our subsidiary companies. We
have a company quality management system certified in accordance with ISO 9001 and EC MED.

PRODUCTS
Our product range consists of:
• Free Fall Lifeboats with capacity from 25 to 90 persons, certified drop height up to 40
meters.
• Conventional Lifeboats with capacity from 22 to 136 persons.
• Fast Rescue Crafts (inboard diesel engine / water jet) from 6.15 to 12 meter - speed up to
40 knots.
• Standard SOLAS rescue boats (outboard engine or inboard diesel engine / water jet).
• Davits – various models for the above listed boats – both offshore and marine type.

SERVICES
Yearly / 5-yearly inspection and service of Lifesaving Equipment according to SOLAS regulation
• Commissioning and Start-Up
• Repair, upgrade and modifications

REFERENCES
• Transocean
• Statoil
• ExxonMobil
• Shell
• BP
• Odfjell Drilling
• Seadrill
• Aker Drilling
• Maersk
• BW Gas
• Frontline
• Quatar Gas
• Maran Gas
• Japan Drilling
• Dolphin
• Ocean Rig
• Saipem

www.intsok.com 41
   
   
 
Novenco  
Henrik Jorkjen  
Sales & Marketing Manager – offshore  
  hj@novencogroup.com  
 
www.novenco-group.com  
 

COMPANY DESCRIPTION
Novenco AS is a global market leader with regard to the manufacture supply and installation of
complete Heating, Ventilation and Air Conditioning (HVAC) systems for the offshore industry.
Projects range from engineering and supply of equipment, to complete turn key packages involving
installation and commissioning. Novenco have a global network of partners and a worldwide
reference list.

PRODUCTS
• Air handling units
• Air handling containers
• Axial flow and Centrifugal fans
• Cooling plant, including provisional stores
• Self contained cooling Units
• HVAC Control systems
• Louvres, Drop separators & filters
• Duct heating and cooling coils
• All type of dampers
• Cabin units / air devices
• Sound attenuators
• Bottle bank for emergency air under shut down
• Air scrubber systems (Air cleaners)

SERVICES
• Design
• Project Management
• Equipment delivery
• Commissioning
• After Sales

REFERENCES
Major Offshore Projects 2006-2009:
2009: Oseberg : (Aker Solution – Statoil)
HVAC equipment delivery including air scrubber system (Air cleaner with water)
2009: LQ to Service jack 1, PLQ : (Master Marine – Master Marine)
System design verification and responsibility. Deliver all air side equipment to LQ +
installation in Indonesia
2009: MT6022 XL Multi purpose vessel: (OTTO Marine – Norshore drilling)
System Engineering and Equipment delivery for Machinery rooms & Turn key delivery for
LQ area.

2009: New LQ to Ekofisk: (Flexmodul – Master-Marine/Conoco Phillips)


System Engineering and Equipment delivery for accommodation module
2009: Halfdan BD: (SMOE – Maersk Oil and Gas)

www.intsok.com 42
System Engineering and Equipment delivery for complete
platform
2008: FPSO Peregrino: (Maersk Contractors – Maersk contractors)
System Engineering and Equipment delivery for accommodation
2008: CJ 70 : (Jurong Shipyard – Petro Prod)
System Engineering and Equipment delivery for accommodation and Utility areas
2008: Offshore windmill park : (ABB Power systems)
HVAC Air Handling Units for transformer platform
2008: Sevan FPSO No 5 – Hantong shipyard, Nantong (Sevan Marine- Sevan Marine)
System engineering and equipment delivery for accommodation and hull.
2008: P-56 Accommodation (FSTP – Petrobras)
Equipment for HVAC systems
2008: P-56 Deck box (FSTP – Petrobras)
HVAC system design, equipment delivery
2008: GM 4000 : (Cosco – Marrac)
Turnkey for complete HVAC systems and equipment
2007: 400 man Floatel B302 (Keppel Fels - Floatel International)
Turnkey for complete HVAC systems and equipment
2007: 3 Jack-ups B300 / B301 / B306 (Keppel Fels - Skeie Drilling & Production)
Turnkey for complete HVAC systems and equipment
2007: Ettric (Aibel - Bluewater)
HVAC Air handling container and HVAC equipment
2007: Kashagan emergency pressure vessels (Aker Kværner – Agip KCO)
Bottle bank for emergency air shut down
2007: Sevan FPSO No 4 – Hantong shipyard, Nantong (Sevan Marine- Sevan Marine)
System engineering and equipment delivery for accommodation and hull.
2007: Gjøa Semi-submersible Topsides (Aker Kværner- Statoil)
Frame agreement for HVAC equipment delivery, including AHU’s and Dampers.
2007: Gjøa Semi-submersible Living Quarters (Aker Kværner- Statoil)
Frame agreement for HVAC equipment delivery, including AHU’s and Dampers.
2007: Sleipner B Compression (Aibel - Statoil)
HVAC Air handling Units and fans
2006: HALFDAN BC (Rosetti Yard, - Maersk oil & gas)
HVAC Fan package delivery
2006: HALFDAN BC (Rosetti Yard, - Maersk oil & gas)
HVAC equipment delivery for accommodation module
2006: Sevan Driller I - Cosco Nantong shipyard (Sevan Marine- Sevan Marine)
System engineering and equipment delivery for accommodation and hull.
2006: Aker H6e Drilling rigs (Aker Kværner- Aker drilling)
Frame agreement for HVAC equipment delivery for 2 off drilling rigs
2006: PRA-1 Modules (Vetco - Petrobras)
HVAC system design, equipment delivery of all VAC equipment
2006: STATFJORD Late Life (AkerKværner - Statoil)
Delivery of HVAC containers for platform upgrade.
2006: P-53 Accommodation, Office and Hull (Keppel shipyard - Petrobras)
HVAC system design, equipment delivery + commissioning of all VAC equipment
2006: OIRFP Prirazlomnaya(Sevmarsh – Sevmorneftegas)
Delivery of over 100 ventilation fans
2006: OIRFP Prirazlomnaya(Sevmarsh – Sevmorneftegas)
Delivery of over 100 ventilation fans

www.intsok.com 43
Oglaend System
Søren Arentsen
Marketing manager
sar@oglsys.no

www.oglaend-system.com

COMPANY DESCRIPTION
Øglænd System leads the market for multi-discipline support systems and cable management
systems used in some of the world’s most important industries. Serving the Marine, Oil and Gas,
Petrochemical, Alternative Energy, Clean Room and Infrastructure industries, we produce a range
of flexible cable tray & ladder systems and various innovative support technologies that deliver
added value through reduced installation time, maximized volume utilisation, weight reductions,
enhanced life time integrity and improved safety performance.

PRODUCTS
• Multidiscipline support systems
• Cable tray and cable ladder systems
• Cable ladders & accessories for ships
• Lighting support equipment
• Racks, instrument stands & equipment plates
• Pipe support
• Trefoil & single foil cable cleats

SERVICES
Our systems are supplied in primarily stainless steel and FRP (Fibre Reinforced Polyester)
• Drilling rigs
• Offshore platforms
• FPSOs
• Petro chemical plants
• LNG terminals

REFERENCES
• Adriatic LNG
• Laminaria Northern Endeavour FPSO
• Bayu Undan
• Al-Shaheen
• Bonga FPSO
• Snøhvit LNG
• Tapti Field
• Petrobras 37, 38, 51, 52, 53 & 54 FPSO
• Petrobras 40 – semi submersible conversion

www.intsok.com 44
   
   
   
PG Pump Solutions  
Per E. Sørum
VP Business Development
per.sorum@pergjerdrum.no
 
www.pergjerdrum.no

COMPANY DESCRIPTION
PG Pump Solutions offers innovative pump and compressor solutions for the global oil and gas,
subsea and marine markets. Our product range is further enhanced to cover related products and
applications to up-stream and down-stream the processes, including:
• Control systems
• Heaters/coolers
• Drives
• Agitators
• Start-up
• Commissioning
• Spare parts of advanced systems and pump packages
PG pumps and compressor packages and related equipment are suitable for fixed and floating
production facilities such as:
• FPSO
• FDPSO
• Semi-submersible platforms
• Seawater injection
• Drilling rigs,
• Intervention vessels
• Cargo handling for supply ships/ vessels and refineries
Further, PG has innovative solutions for:
• Subsea boosting and processing facilities
• Subsea well boosting
• Subsea water injection
• Subsea mud and drill cuttings boosting
PG represents high-quality pump and compressor suppliers throughout Europe.

PRODUCTS
PG Pump Solution focus on the export of our pump packages and pump solutions, such as:
• PG MACS Cargo handling
o PG MACS - Multi Application Cargo Solution, for Riggs, Supply ships and onshore
plants Mud & drill cuttings included
• Injection packages:
o Chemicals Injection packages
o MEG injection Packages
o Methanol Injection Packages for Topside (and /or subsea) production facilities

• Subsea Pumps:
o Subsea Multiphase pump solutions (Bornemann)
o Vertical Twin screw multiphase
o Subsea pumps for subsea separation facilities, wellhead boosting and tiebacks
o PG MAPS (Multi Application Pump Solution)
o Subsea and topside Liquid / abrasive Pump solution, for liquid injection and /or
boosting (HP/HT), drilling mud and cuttings boosting

www.intsok.com 45
SERVICES
PG Pump Solutions deliver spare parts and performs service and maintenance worldwide.

REFERENCES
• Chemical injection Package: Gjøa chemical injection module, 150 ton module including
28 dosing pumps, 19 steel tanks, all associated equipment and project management.
Client: StatoilHydro (2009)

• PG MACS: Deliveries of environmental friendly, closed loop - Cargo solutions incl. tanks -
feeder and -pumping systems for 10 supply ships. Clients: Farstad Shipping, Østensjø,
DOF, STX, MAN Ferrostahl, Bourbon Offshore. (2007-2009)

• Subsea Pumping Solution:


Vertical Multi-phase twin screw pump for the test facility in Porsgrunn. Designed as a
subsea solution. Client: StatoilHydro (2009)

• Single phase:, PG-MAPS :(Multi Application Pump Solution), HP/HT Feluwa Pump. The
proven and successful Feluwa Pumping concept is being completed and prototype will
undergo full testing Q1 2010, for topside and subsea applications

www.intsok.com 46
 
 
ProSep
 
Gustav Wee
Sales Director  
sales@prosep.com  
 
   
www.prosep.com

COMPANY DESCRIPTION
ProSep is a provider of process solutions and process components for the treatment of produced
water, sour gas and crude oil. The company specializes in compact in-line equipment for separation
and mass transfer, targeting high performance, compact equipment.

PRODUCTS
ProScav/ ProCAP – selective H2S removal
ProDry – gas dehydration
ProSalt – crude desalting
ProMix – enhanced demulsification of crude-water flow
CTour – produced water treatment process
SorbSep – gas flotation for produced water treatment
Sorbfloc – environmentally friendly flocculation of hydrocarbon components in produced water

SERVICES
Process analysis for debottlenecking
Solvent characterization
Performance testing/experimental design

REFERENCES
CTour applied for the treatment of 70 % of the produced water volume in the North Sea
40 ProScav units delivered world wide
8 ProSalt/ProMix units delivered world wide
A total of 3 OTC Innovation Awards received since 2005 (ProScav, CTour, ProSalt)

www.intsok.com 47
   
   
Rapp Bomek
   
Jostein Johansen  
Sales & Marketing Director
jostein.johansen@rappbomek.com

 www.rappmarine.com

COMPANY DESCRIPTION
Rapp Bomek AS is Norway’s largest manufacturer of advanced-technology fireproof and explosion-
proof doors for the offshore petroleum industry. A member of the Rapp Marine Group, Rapp Bomek
continues to develop new generations of advanced industrial products for demanding marine
operations.

PRODUCTS
Offshore Fire Doors: Rapp Bomek fire doors are tested according to all applicable specifications
and are type-approved by Det Norske Veritas, American Bureau of Shipping, Lloyd’s Register of
Shipping and the US Coast Guard for use on fixed and floating platforms. The doors are
manufactured under a strict QA system in accordance with ISO 9001, and fire doors delivered to
platforms in the North Sea continue to perform well after more than 25 years in a harsh, saline
environment.

Selection: Door leafs and frames of mild steel, stainless steel or aluminium are available, and
Rapp Bomek doors include several ratings and types:
• Hinged and sliding • Louvered
• Single and double-sized • Combination doors, fire rated and
• Light-duty A-0/A-60 rated weather/watertight
• Super light-duty AO/A60 rated • Pneumatically operated
• Medium-duty A-0/A-60 rated • Hydraulically operated
• Heavy-duty A-0/H-120 rated • Customer specified
• Non-rated • Electric operated

SERVICES
The Rapp Bomek Service team provides the following on all types of Fire Doors and Equipment:
- Installation - Repair - Maintenance
The service team also carries out surveys of existing platform doors with a view to providing
recommendations for upgrading and cost effective improvements. Based on long experience we
have established a considerable stock of spare parts required during normal operation. The service
team has long experience and has the necessary certificates and safety courses required for
offshore work.

REFERENCES
Since 1980, Rapp Bomek has delivered nearly 20,000 doors to oil and gas platforms, ships and
projects, including the following:
• Girasol FPSO • Gjøa Platform • P-43 • P-56
• Dalia FPSO • Kristin Platform • P-48 • P-16
• Ehra FPSO • Shah Deniz Jack-up rig • P-50
• Akpo FPSO • Korchaging Platform • P-51
• Pazflor FPSO • Agbami FPSO • P-52
• Sakalin Phase I • Haldan A, B & D platform • P-54

www.intsok.com 48
   
 
Rolls Royce Marine
 
Atle Gaasø
Sales Manager
Atle.gaaso@rolls-royce.com  
 
 www.rolls-royce.com  

COMPANY DESCRIPTION
Rolls-Royce is a world leader in marine solutions, providing products, service and expertise to more
than 30 000 commercial and naval vessels in the offshore, merchant, naval and submarine
markets. In addition we have gas engines for power plants onshore.
The company has a broad customer base including marine customers, navies, and energy
customers in nearly 120 countries. Our global support network offers a wide range of service
support, including tailor made service agreements.

PRODUCTS
Rolls-Royce products include a wide range of:

• ship design • -
diesel and gas engines • deck machinery
• winches • gas turbines • propellers water jets
• thrusters • water jets • marine control systems

Product examples UT-DesignTM:


• offshore supply vessels • anchor handling vessels
• well stimulation vessels • sub sea construction vessels
• standby and rescue vessels • multipurpose vessels
• IMR vessels • mobile offshore units
• Offshore icebreakers and ice class vessels • coastguard vessels

SERVICES
Rolls-Royce Marine AS, Ship Technology-Offshore. “Trusted to deliver excellence”. We offer
advanced know-how founded on more than 35 years experiecn in marine design, engineering and
state of the art technology:
• vessel design and system integration, tailor made based on the owner’s requirements and
our 35 years of desing experience.
• single point of contact in Rolls-Royce covering both design and Rolls-Royce equipment
• in-house detail engineering, delivering full detail design packages for vessel construction
o site support
o procurement support
• through life-time, upgrade and rebuild support
• spare-parts support and follow up

REFERENCES
• DOF Subsea
• Maersk

www.intsok.com 49
   
   
   
Roxar  
Vincent Vieugue
VP Sales & Marketing
Vincent.vieugue@roxar.com
 
www.roxar.com

COMPANY DESCRIPTION
The use of Roxar technology enables our users to increase oil and gas recovery, accelerate
production and reduce capital and operating costs. From high temperature reservoir monitoring to
multiphase metering, sand erosion sensors and corrosion detection, Roxar allows operators to
make reservoir management and flow assurance decisions with the maximum amount of
information. Roxar is in a unique position to act as a “one stop supplier” to serve our customers in
all their metering and monitoring needs. Whether it is topside, subsea or downhole – Roxar’s
products meet the challenges of reservoir management and production optimisation. Roxar is part
of Emerson Process Management, adding subsea reservoir management and production
optimisation for global upstream E&P customers.

PRODUCTS
• Roxar Multiphase meters
• Roxar Watercut meters
• Roxar wetgas meters
• Roxar Sand monitors
• Roxar PIG detectors
• Roxar Erosion monitors
• Roxar Corrosion monitors
• Roxar Field Signature Method (FSM)

The Roxar Flow Measurement portfolio also includes technology for corrosion detection, flow
assurance, subsea instrumentation, downhole monitoring and data acquisition through Roxar
Fieldwatch.

SERVICES
Roxar is a world class provider of customer services. From installation through to a field’s
decommissioning, we believe in helping you get maximum value from the technology solutions we
deliver. Our service offering includes:

• Global on-site support


• Remote technical support
• Global Service Centre
• Training
• Technical Service Agreements
• Project Management

REFERENCES
Roxar Flow Measurement has a global reference list of product and solutions delivered on projects
worldwide the last few years.

www.intsok.com 50
   
   
Scana Industrier
   
Jan Henry Melhus  
Group Director Oil & Gas
jhm@scana.no

 www.scana.no

COMPANY DESCRIPTION
Scana Industrier ASA is a Nordic industrial group providing products and system solutions to four
market segments:
• Marine
• Oil & Gas
• Energy
• Steel & Machinery
Our aim is to be the preferred supplier for leading companies within our market segments in
addition to expanding our local presents & manufacturing in international markets. The group has
operational companies in Norway, Sweden, China, USA, Poland, Singapore, Brazil and South
Korea, as well as associated companies in a number of countries. The head office is in Stavanger,
Norway.

PRODUCTS
• Engineering & design of production, offloading & subsea equipment.
• Linear winches, mooring equipment & offloading systems
• Propellers, thrusters, gears, propulsion systems incl electronic remote systems
• Actuators & controls systems
• Forged special components, high alloy castings, machined products for shafts, axels,
connectors & Risers.
• Material technology consultancy, repair & maintenance activities

SERVICES
• Marine & propulsion system services
• Maintenance and repair of BOP´s , Subsea equipment, Riser systems & Drilling equipment
under services provider agreement
• Offering of Material technology advisory and material laboratory services.
• Control systems upgrade and infield equipment maintenance & services
• Engineering and Design services

REFERENCES
• Sevan Marine – Offloading systems
• National Oilweld – machined drilling products
• FMC / GE / AkerKværner – Riser & connector materials
• Wartsila / Rolls Royce – Propulsion shafts
• Hyndai / Samsung – Gas & Ballasting actuators and Controls
• AkerYards -Propulsion systems
• BP / Shell / Statoil / Sandvik / Man / Caterpillar / ABB / AkerKværner & more – Forgings &
special ally castings & machined products

www.intsok.com 51
   
   
Sharecat Solutions
Stein-Yngve Iversen
Vice President Sales
syi@sharecat.com

www.sharecat.com
 

COMPANY DESCRIPTION
Sharecat Solutions provides content management solutions for the Oil and Gas industry, enabling
sharing of information regarding parts and equipment used for the construction and operation of oil
and gas installations. Sharecat solutions’ have been developed in close cooperation with industry
users to improve procurement processes by up to 90%, cut inventory costs by 20% and speed time
to first oil by increasing the quality and accuracy of the supply chain information that is handed over
to plant operations and maintenance.

Sharecat recognises that the supply chain involved in the creation, supply and maintenance of the
parts and equipment that Operators use in day to day plant activities is complex and multi-faceted
due to its many participants - Engineering Procurement and Construction Contractors (EPCs),
manufacturers, suppliers and sub-suppliers – and its hierarchical nature. The Sharecat solution
provides a web-based collaborative environment for gathering, improving and delivering supply
chain information for projects that meet the needs and requirements from operations.

PRODUCTS
• Information hub between equipment/package suppliers, engineering contractors and the
operator.
o Pre validated supply chain content from more than 2000 manufacturers.
o Re-usable across projects and companies
o Standardized descriptions across manufacturers
o Unique template technology
o Efficient build of new supply chain content

SERVICES
• Refine, improve and standardize information requirements for use in supply chain
o Define and implement optimal information processes for supply chain in projects
• Monitor and drive information processes in the supply chain
• Spares management (consolidation, evaluation, recommandations)
• Content services including translation services
o Manage translation processes (e.g English – Portuguese)
• Quality assurance of data

REFERENCES
Used by more than 30 operators worldwide. Some major projects:
• SEIC – Sakhalin II project- Lunskoye & Piltun gas platforms: Information hub
• StatoilHydro – Ormen Lange – Subsea installations linked to processing plant: Spares
information management
• Exxon Mobile – Ringhorne – Platform linked to FPSO : Information hub
• BP – Valhall Re-development – New platform linked to Valhall : Information hub
• BP- Skarv – FPSO for the Skarv field: Information Hub

www.intsok.com 52
   
 
 
Siemens  
Eiar Saunes
 Sales Director
Einar.saunes@siemens.com

www.siemens.com

COMPANY DESCRIPTION
Siemens’ comprehensive portfolio extends across the entire oil and gas value chain, meaning that
we can provide reliable, innovative, efficient and environmentally friendly products, systems and
solutions throughout the entire value-adding process. Siemens innovative solutions are continually
being streamlined through our extensive, market oriented development and research programs, all
with a view of developing key enabling technologies for emerging processes and applications and
providing our customers with the best possible solutions, service and value for money.
Expert solutions tailored to your needs and specifications: For over three decades, Siemens
has been specializing in automation, electrical, compression and power generation systems for
offshore structures. From tension-leg platforms through to semi-submersibles and floating
production systems, Siemens can guide you through the early-on stages of front-end engineering
through design, supply and commissioning to operations and maintenance services. All of our
technology is API and NACE compliant and skid-mounted, providing you with peace of mind and
ease of transportation. Siemens also has a track record of many years in the Subsea area and are
now developing new innovative solutions for Subsea to enable large-scale processing. Our four
Offshore segments are Drilling, Production, Subsea and Life-Cycle Management.

PRODUCTS
• Power generation by gas or steam turbines • Automation and control systems
• Electrical, transmission and distribution • Telecommunication solutions
• Compression • Navigation solutions
• Electrical solutions and instrumentation • Safety and security solutions
• Fault tolerant power supply systems
• Marine power management
• Variable Speed Drives
• Subsea power supply, distribution, drives, compression and control

SERVICES
Siemens offers customized service plans that can compromise troubleshooting, 24/7 hotline
support, spare parts delivery, repairs, system upgrades and maintenance operations. Siemens’
strong local presence ensures that your service needs are met locally.

REFERENCES

Drilling Topside/FPSO
• Sevan Deepsea Driller 1 • Sevan Hummingbird & Piranema
• Odfjell Jackup & semi-submersible rigs • BP Skarv
• Maersk Jackup & semi-submersible rigs • Petrobras P50 & P52
• Transocean Drillships

www.intsok.com 53
   
   
 
Simtronics / Water Mist Engineering
Berkan Gurun
Sales Director
 
bg@wme.no  
 
www.wme.no

COMPANY DESCRIPTION
Water Mist Engineering aims to be the leading Engineering & Production Company of Active Fire
Fighting Equipments as well as Fire Prevention Systems, mainly focusing on the Oil & Gas,
Maritime and Petrochemical industries.

PRODUCTS
Active Fire Fighting Equipments
• Deluge Valve Skids • Dual agents
• Foam Systems • Powder Systems
• Water Mist Systems • Hydrants
• Gas Systems • Monitors

Fire Prevention Systems


• Nitrogen Generators

SERVICES
• Detail technical design of complete Active Fire Fighting Systems as well as Fire Prevention
Systems according to all types of class societies and regulations.
• Hydraulic calculations by use of Pipe net software
• Preparation of fire water demands reports
• Nozzle and piping placement studies
• Preparation of piping and Instrument Diagrams
• Preparation of data sheets
• Commissioning and After Sales services to our equipments
• Studies, Calculations, Planning & Execution of the modifications and upgrades of the
outdated systems

REFERENCES

• Statoil (Ringhorne Platform) • DOF (Platform Supply Vessel


• Modec (FPSO) • Tanker Pacific (FPSO)
• GDF Suez, (Gjøa platform) • BW Offshore, Cascade & Chinook, (FPSO) (EX-1859
• Ezra Holding (FPSO) Petrobras)
• DSME • STX Europe (PlatformSupply Vessel )
• BOA ( Platform Supply Vessel) • Hyundai
• Song Doc MV BV ( FPSO) • Odfjell Drilling, Deep Sea Stavanger, (Drilling Rig)
• Samsung • Exxon Mobil (Huldra platform)
• Golar Spirit (FSRU) • Aker Smart (FPSO)

www.intsok.com 54
   
   
Thermtech
Rocco V. Valentinetti
Sales & marketing Director
rocco@thermtech.no

 www.thermtech.no

COMPANY DESCRIPTION
Thermtech is the Norwegian technology company with a vision to set the global standard for the
treatment of oily waste; from drilling cuttings, refinery sludge and production pits. The tool to reach
this goal is the Thermo mechanical Cutting Cleaner (TCC), a friction based thermal separation
technology that is able to recover the base oil from Oil Based Mud for re-use. The technology can
be operated both onshore and offshore. Thermtech believes that treatment in the TCC is the best
environmental option and in most cases also the best commercial option since TSCC is able to
recover the high value base oil from the cuttings with the same qualities as the original base oil.

PRODUCTS
The TCC can be delivered in a variety of configurations and treatment capacities. In addition
specific customer requirements may be included in the actual configuration. Capacities range from
3 to 6 metric tons, the TCC can be electrically or diesel driven. The unit can be designed for an
indoor installation or as a mobile unit.

Type Reference Short description Drive line Hourly capacity


TCC 34E SOS 00179 Indoor installation in plant Electrical 3-4 MT
TCC 46E SOS 00179 Indoor installation in plant Electrical 5-6 MT
TCC 34D SOS 00179 Indoor installation in plant Diesel 3-4 MT
TCC 46D SOS 00179 Indoor installation in plant Diesel 5-6 MT
TCC 46E-M DoMU 03417 Mobile unit Electrical 5-6 MT
TCC 46D-M DoMU 03417 Mobile unit Diesel 5-6 MT

SERVICES
Thermtech do not provide services, but assist the customers in getting their business up and
running. Beside the equipment itself, Thermtech offer assistance with permit applications and plant
design, education and training of customer’s operators and supervisors, installation and
commissioning, operational start up assistance, and remote and on site supervision of operations
and maintenance.

REFERENCES
• TCC-450 kW installation operated by TWMA, Mongstad, Norway
• TCC-650 kW installation operated by TWMA, Mongstad, Norway
• TCC-132 kW w/electric motor, operated by TWMA, Egypt, Nigeria, UK(onshore & offshore)
• TCC-450 kW installation operated by North Refining B.V. Delfzijl, the Netherlands
• TCC-710 kW installation operated by West Africa Management Ltd. Port Harcourt, Nigeria
• 2 TCCs x 715 kW operated by M-I Swaco, Bautiono, Kazakhstan

www.intsok.com 55
   
   
TTS Energy
Arnt Lauen
VP Sales
arnt.lauen@tts-sense.com

www.tts-sense.com
 

COMPANY DESCRIPTION
TTS Energy delivers the following to the international energy industry:
• high performance drilling equipment
• multifunctional rigs
• world class control systems

Competence, drive and experience make us a strong partner, providing unique solutions and
advanced technologies. Our advanced products demonstrate our commitment to develop next-
generation solutions. Our automated drilling equipment allows the entire operation to be remote
controlled from the drilling control room. This makes our products safer, more reliable and easier to
use.

PRODUCTS &SERVICES
• Offshore Drilling Packages
• Onshore Drilling Packages
• Drilling Control Systems
• Hoisting & Rotation Equipment
• Pipe Handling Equipment
• Drill Floor Tools
• BOP Handling Equipment
• Mud Systems
• Services

REFERENCES
Drilling Packages
Project Name New Build MSC CJ70 Jack-up KFELS Class N Jack-up (B306)
Customer Larsen Oil & Gas Skeie Drilling & Production ASA
Builder Jurong Shipyard Pte Ltd Keppel FELS

R&P Rigs
Project Name 150 Ton R&P Trailorized Rig Package No. 150 Ton R&P Trailorized Rig Package No. 1-7
1-4
Customer Ability Drilling Management AS, Norway Weatherford Drilling International

www.intsok.com 56
   
   
Vector Group
Torkjell Ringstad
Vice President Sales & Business Development
torkjell.ringstad@vectorint.com

www.vectorint.com

 
COMPANY DESCRIPTION
Vector is an international organisation, renowned for its compact connection and sealing
technology solutions for piping, vessel and pressure containment in the oil and gas, nuclear,
processing, chemical, mining and aerospace industries.

• Vector employs some 150 personnel and with offices in the key global industrial regions.
• In-house engineers are able to design, test and manufacture bespoke pressure
containment and sealing solutions.
• Engineering and manufacturing facilities in Norway and the UK.
• Vector International is built upon a strong history, representing over 40 years experience,
resulting in an in-depth understanding of industry needs.
.

www.intsok.com 57
   
   
   
Westad  
Jørn-IngeThrondsen
Managing Director
jth@westad.com
 
www.westad.com

COMPANY DESCRIPTION
The company was established in 1895 by Daniel Westad. At the time, the company manufactured
valves to local pulp and paper industry. Various transitions in the industry allowed Westad to start
serving the Marine industry around 1950.
With the arrival of oil and gas production in Norway in the late 1970-ties, Westad adapted its
product lines to serve this demanding market segment. Special stainless steel materials like
Duplex, Super-duplex, 6MO, and Titanium became the common materials for valves in demanding
services.

Westad aims to be the leading supplier of high quality butterfly valves for LNG, LPG, chemicals and
other critical applications.
• 10.000 valves in the North Sea
• More than 100.000 valves globally

Westad Industri AS is located at Geithus approx 70 km outside Oslo.

PRODUCTS
High Performance Butterfly Valves for services in corrossive media, cryogenic temperatures and
other extreme operational conditions.

• Double and Triple Offset design


• Temperature range from +450°C to -196°C
• Pressure rating: Class 150, 300 and 600
• Specialized in exotic materials

REFERENCES
Projects:
• Skarv Idun • Dabhol LNG RT
• BP Angola Greater Plutonia • YungAn LNG RT
• Stockholm Nynaeshavn LNG RT

Customers:
• Aker Solutions • Hamworthy
• Adnoc • Keppel
• Bechtel Shipyard
• BP • KBR
• Chevron • Linde
• Chiyoda • Petrobras
• ConocoPhillips • Shell
• DSME • Sonatrach
• ExxonMobil • Statoil
• FW • TGE
• Weir

www.intsok.com 58
   
   
   
Wilhelmsen Marine Engineering  
Ivar Rogneflåten
Vice President HVAC
Ivar.rogneflaten@wilhelmsen.com
 
www.wilhelmsen.com

COMPANY DESCRIPTION
Wilhelmsen Maritime Services (WMS) have via the two Companies – Wilhelmsen Marine
Engineering and Wilhelmsen Ships Equipment, formerly known as ABB and Unitor, been a supplier
of HVAC systems and fire fighting equipment to the offshore industry worldwide for decades. Our
worldwide capability includes engineering, design, installation, commissioning and service for our
products to all type of oil and gas installations.

PRODUCTS
• HVAC system packages
• Air Handling Units
• Fans
• Refrigeration Machinery
• Fire/Gas Dampers
• Fan Coil Units
• Fire Suppression Systems
• Nitrogen Systems

SERVICES
By our extensive world wide network as a part of the WMS, with offices in more than 70 countries,
we can offer technical services such as:
• regular maintenance
• survey’s
• modification engineering
• installations
• upgrading
• conversions
• overhaul of compressors For HVAC, refrigeration and fire & gas systems

REFERENCES
• BP Skarv • Saipem
• Troll A • Petrobras
• Seadrill • Subsea 7
• Petrorig • Mongstad
• Thunder Horse • Sevan Hummingbird and Voyager
• Atlantis • Transocean
• Snøhvit • Maersk Rigs
• Hai Yang Shi You 981

www.intsok.com 59
PROMOTING NORWEGIAN OIL AND GAS CAPABILITIES IN INTERNATIONAL MARKETS

INTSOK, Oslo INTSOK, Stavanger INTSOK, Bergen


Hoffsveien 23, 2nd floor Prof. Olav Hanssens vei 7a Strandgaten 6
P.O. Box 631 Skøyen P.O. Box 8034 NO-5030 Bergen
NO-0214 Oslo NO-4068 Stavanger Norway
Norway Norway

Phone: +47 22 06 14 80 Phone: +47 51 87 48 80 Phone: +47 91 39 23 27


Fax: +47 22 06 14 90 Fax: +47 51 87 48 81 E-mail: intsok@intsok.com
E-mail: intsok@intsok.com E-mail: intsok@intsok.com Web: www.intsok.com
Web: www.intsok.com Web: www.intsok.com

You might also like