You are on page 1of 31

HARYANA STAFF SELECTION COMMISSION,

BAYS NO. 67-70, SECTOR-2, PANCHKULA – 134151


Website www.hssc.gov.in

Advt. No. 5/2018 Date of publication : 26.12.2018


Opening date for submission of online applications : 05.01.2019
Closing date for submission of online applications : 04.02.2019 (by 11:59PM)
Closing date for deposit of fee : 07.02.2019 (by 11:59PM)

Online applications are invited for direct recruitment of under mentioned


categories of posts using the website of HARYANA STAFF SELECTION COMMISSION i.e.
www.hssc.gov.in. Candidates should fill up the application form only after going through
the instructions. The online application can be filled up from 05.01.2019 to 04.02.2019
till 11.59 P.M, thereafter website link will be disabled. The candidates are strictly advised
to apply online well in advance without waiting for last date of submission of online
application form. The candidates are advised to check all the particulars filled up by them
in application form and also ensure the correctness of uploaded certificates before finally
submitting the application as no request for change of any particular shall be entertained
by the Commission. No offline application form or copy of downloaded application form will
be accepted by the office. Qualification/eligibility conditions and other documents will be
determined with regard to last date fixed to apply online applications also called as closing
date i.e. 04.02.2019 given in the advertisement. No candidate who does not fulfill the
qualification/eligibility condition on cutoff date need to apply. No confidential result qua
minimum qualification shall be entertained. The details of the posts are as under: ‐
DETAILS OF POSTS AND QUALIFICATIONS
Skill Development and Industrial Training, Haryana

Cat. No.1 61 posts of Turner Instructor (Theory) (Re-Advertised).

(GEN=21, SC=11, BCA=8, BCB=6, ESM GEN=6, ESM SC=2, ESM BCA=2,
ESM BCB=2, ESP SC=1, ESP BCA=1, ESP BCB=1) TOTAL=61 PHC-HH=1,
OH=1

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or its


equivalent in Mechanical / Production/ Industrial from AICTE recognized
institution/ university or Institutions established by Ministry of Human
Resource Development (MHRD), Government of India, on full time regular
mode basis, with one year practical/ teaching experience.

OR

Diploma in Engineering or its equivalent in Mechanical/


Production/Industrial from Haryana State Board of Technical Education,
with two years practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/ P.O.T.,
from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an Industrial


establishment covered under Apprenticeship Act or in a recognized
technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall be


relaxed if the candidate possesses equivalent technical qualification as
certified by Director General, Rehabilitation, Ministry of Defence, or
Director General Employment and Training, Government of India.
Age: 17-42 Years
Pay Scale: FPL -6 (35400-112400) Pre-Revised 9300-34800+3600GP.

Cat. No.2 95 posts of Fitter Instructor (Theory) (Re-Advertised).

(GEN=31, SC=20, BCA=15, BCB=9, ESM GEN=9, ESM SC=2, ESM


BCA=2, ESM-BCB=3, ESP-GEN=1, ESP-SC=1, ESP-BCA=1, ESP-BCB=1)
TOTAL=95. PHC-VH=1, HH=1, OH=1

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or its


equivalent in Mechanical/ Production/ Industrial/ Fabrication from
AICTE recognized institution/ university or Institutions established by
Ministry of Human Resource Development (MHRD), Government of India,
on full time regular mode basis, with one year practical/ teaching
experience.

OR

Diploma in Engineering or its equivalent in Mechanical/ Production/


Industrial/ Fabrication from Haryana State Board of Technical Education,
with two years practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate possessing


Craft Instructor Training Course in relevant trade/ P.O.T., from NCVT
recognized institute;

b) Experience should be in the concerned trade/ field in an Industrial


establishment covered under Apprenticeship Act or in a recognized
technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall be


relaxed if the candidate possesses equivalent technical
qualification as certified by Director General, Rehabilitation, Ministry of
Defence, or Director General Employment and Training, Government of
India.

Age: 17-42 Years


Pay Scale: FPL -6 (35400-112400) Pre-Revised 9300-34800+3600GP.

Cat. No.3 66 posts of Welder (Gas & Electric) Instructor (Theory) (Re-Advertised).

(GEN=23, SC=13, BCA=9, BCB=5, ESM GEN=6, ESM SC=2, ESM BCA=2,
ESM-BCB=3, ESP-SC=1, ESP-BCA=1, ESP-BCB=1, TOTAL=66 PHC-HH=1,
OH=1

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or its


equivalent in Mechanical/ Metallurgical /Production/Fabrication/ Welding
from AICTE recognized institution/ university or Institutions established by
Ministry of Human Resource Development (MHRD), Government of India,
on full time regular mode basis, with one year practical/ teaching
experience.

OR

Diploma in Engineering or its equivalent in Mechanical/ Metallurgical/


Production/ Fabrication/ Welding from Haryana State Board of Technical
Education, with two years practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.


Note: a) Preference shall be given to degree/ diploma holder candidate possessing
Craft Instructor Training Course in relevant trade/ P.O.T., from NCVT
recognized institute;

b) Experience should be in the concerned trade/ field in an Industrial


establishment covered under Apprenticeship Act or in a recognized
technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall be


relaxed if the candidate possesses equivalent technical qualification as
certified by Director General, Rehabilitation, Ministry of Defence, or Director
General Employment and Training, Government of India.

Age: 17-42 Years


Pay Scale: FPL -6 (35400-112400) Pre-Revised 9300-34800+3600GP.

Cat. No.4 17 posts of Craft Instructor Stenography (Hindi) (Theory) (Re-


Advertised)..

(GEN=6, SC=3, BCA=2, BCB=2, ESM GEN=2, ESM SC=1, ESM BCA=1)
TOTAL=17

E.Q. (i) Full time regular mode bachelor degree with minimum 60% marks in Hindi
subject, from a recognized University;

(ii) Diploma in Office Management and Computer Application (Hindi) or its


equivalent from Haryana State Board of Technical Education.

(iii) Shorthand at a speed of 80 words per minute and 15 words per minute
Transcriptions thereof and 30 word per minute in typing in Hindi;

(iv) ‘O’ level certificate in Computer from Department of Electronics and


Information Technology (DOEACC), Government of India or its equivalent
course from Haryana State Board of Technical Education/recognized
university;

v) Hindi/ Sanskrit upto Matric Standard or higher education.

Age: 17-42 Years


Pay Scale: FPL -6 (35400-112400).

Cat. No.5 20 posts of Craft Instructor Stenography (English) (Theory) (Re-


Advertised).

(GEN=8, SC=3, BCA=2, BCB=2, ESM GEN=2, ESM SC=1, ESM BCA=1, ESP
BCA=1) TOTAL=20

E.Q. (i) Bachelor degree with minimum 60% marks in English subject, from a
recognized University;

(ii) Diploma in Office Management and Computer Application (English) or its


equivalent from Haryana State Board of Technical Education;

(iii) Shorthand at a speed of 100 words per minute and 15 words per minute
transcriptions thereof and 40 word per minute typing in English;

(iv) ‘O’ level certificate in Computer from Department of Electronics and


Information Technology (DOEACC), Government of India or its equivalent
from Haryana State Board of Technical Education/recognized university;

v) Hindi/ Sanskrit upto Matric Standard or higher education.

Age: 17-42 Years


Pay Scale: FPL -6 (35400-112400)
Cat. No.6 50 posts of Computer Operator and Programming Assistant Instructor
(Theory) (Re-Advertised).

(GEN=6, SC=14, BCA=8, BCB=6, ESM GEN=7, ESM SC=1, ESM BCA=3,
ESM BCB=2, ESP GEN=1, ESP SC=1, ESP BCA=1) TOTAL=50. PHC-HH=1,
OH=1

E.Q. i) AICTE recognized Bachelor degree in Computer Engineering/ Information


Technology or its equivalent from AICTE recognized institute/university or
Institutions established by Ministry of Human Resource Development
(MHRD), Government of India, on full time regular mode basis, with one
year practical/teaching experience;

OR

‘A’ level certificate from Department of Electronics and Information


Technology (DOEACC), Government of India, with two years practical/
teaching experience in the related field;

OR

B’ level certificate from Department of Electronics and Information


Technology (DOEACC), Government of India, with one year
practical/teaching experience in the related field;

OR

M.Sc Computer/ M.Sc Computer Application/ M.Sc Information


Technology/ M.Sc Software/MCA after passing B.Sc./ BCA from a
recognized university;

OR

Three years Diploma in Computer Application/ Engineering or its


equivalent from Haryana State Board of Technical Education with two
years practical/ teaching experience;

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note:- The above mentioned experience must be in relevant field and


practical/teaching from a reputed industrial concern covered under
Apprenticeship Act or recognized institution.

Age: 17-42 Years


Pay Scale: FPL -6 (35400-112400)

Cat. No.7 3 posts of Senior Instructor Hospitality (Theory) (Re-Advertised).

(GEN=3)

E.Q. (i) Bachelor degree in Hotel Management passed with minimum 55% marks
form an institute/university approved by National Council of Hotel
management & Catering Technology or All India Council of Technical
Education.

OR

Three year Diploma in Hotel Management passed with minimum 55%


marks from an institute/university approved by National Council of Hotel
management & Catering Technology or All India Council of Technical
Education or Haryana State Board of Technical Education;
(ii) Four year teaching / Practical Experience from a recognized institution /
minimum three star Hotel;

(iii) Hindi / Sanskrit upto Matric standard or higher education.

Age: 17-42 Years


Pay Scale: FPL -6 (35400-112400)

Cat. No.8 4 posts of Food Production Instructor (Theory) (Re-Advertised).

(GEN=3, SC=1)

E.Q. (i) Bachelor degree in Hotel Management passed with minimum 50% marks
form an institute/university approved by National Council of Hotel
Management & Catering Technology or All India Council of Technical
Education.

OR

Three year Diploma in Hotel Management passed with minimum 55%


marks from an institute/university approved by National Council of Hotel
Management & Catering Technology or All India Council of Technical
Education or Haryana State Board of Technical Education;

(ii) Two years teaching / Practical Experience from a recognized institution


/ Minimum three star Hotel;

(iii) Hindi / Sanskrit upto Matric standard or higher education.

Age: 17-42 Years


Pay Scale: FPL -6 (35400-112400)

Cat. No.9 1 post of Food & Beverage Service Instructor (Theory) (Re-Advertised).

(GEN=1)

E.Q. (i) Bachelor degree in Hotel Management passed with minimum 50% marks
form an institute/university approved by National Council of Hotel
Management & Catering Technology or All India Council of Technical
Education.

OR

Three year Diploma in Hotel Management passed with minimum 55%


marks from an institute/university approved by National Council of Hotel
Management & Catering Technology or All India Council of Technical
Education or Haryana State Board of Technical Education;

(ii) Two years teaching / Practical Experience from a recognized institution


/ Minimum three star Hotel;

(iii) Hindi / Sanskrit upto Matric standard or higher education.

Age: 17-42 Years


Pay Scale: FPL -6 (35400-112400)

Cat. No.10 4 posts of Lab Attendant Food Production Instructor (Theory) (Re-
Advertised).

(GEN=2, SC=1, BCA=1) Total=4.

E.Q. (i) One year and six month duration certificate Course or Diploma in
concerned trade from Food Craft Institute/Institute of Hotel Management
approved by National Council of Hotel Management & Catering Technology
/ All India Council of Technical Education / Haryana State Board of
Technical Education;

(ii) Five years Practical experience from a recognized institution/minimum


three star Hotel, Including training period;

(iii) Hindi /Sanskrit upto Matric Standard or higher education.

Age: 17-42 Years


Pay Scale: FPL -2 (19900-63200)

Cat. No.11 5 posts of Health Sanitary Instructor (Theory) (Re-Advertised).

(GEN=3, SC=1, BCA=1) Total=5.

E.Q. i) Bachelor degree in Ayurvedic Medicine & Surgery (BAMS) from a


recognized institution/university;

OR

AICTE Recognized Bachelor degree in Public Health and Environmental or


Environmental Engineering/ Technology or its equivalent from AICTE
recognized institute/university or Institutions established by Ministry of
Human Resource Development (MHRD), Government of India, on full time
regular mode basis;

OR

Post Diploma in Health care with B.Sc. Degree;

OR

Diploma in Public Health and Environmental or Environmental


Engineering from Haryana State Board of Technical Education;

OR

ii) Five years practical/teaching experience in concerned trade from


recognized Institution/ Industrial concern covered under Apprenticeship
Act, including training period;

iii) Hindi/Sanskrit upto Matric Standard or higher education;

Note: Preference shall be given to candidate possessing Craft Instructor Training


Course/Principals of Teaching course (P.O.T.) from D.G.E. & T. recognized
institute.

Age: 17-42 Years


Pay Scale: FPL -6 (35400-112400)

Cat. No.12 3 posts of Litho Offset Machine Minder Instructor (Theory) (Re-
Advertised).

(GEN=3 )

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or its


equivalent in Printing Technology from AICTE recognized institution/
university or Institutions established by Ministry of Human Resource
Development (MHRD), Government of India, on full time regular mode
basis, with one year practical/ teaching experience.

OR

Diploma in Engineering or its equivalent in Printing Technology from


Haryana State Board of Technical Education, with two years practical/
teaching experience.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate possessing


Craft Instructor Training Course in relevant trade/ P.O.T., from NCVT
recognized institute;

b) Experience should be in the concerned trade/ field in an Industrial


establishment covered under Apprenticeship Act or in a recognized
technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall be


relaxed if the candidate possesses equivalent technical qualification as
certified by Director General, Rehabilitation, Ministry of Defence, or Director
General Employment and Training, Government of India.

Age: 17-42 Years


Pay Scale: FPL -6 (35400-112400)

Cat. No.13 2 posts of Desk Top Publisher Operator Instructor (Theory).

(GEN=2)

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or its


equivalent in Printing Technology from AICTE recognized institution/
university or Institutions established by Ministry of Human Resource
Development (MHRD), Government of India, on full time regular mode
basis, with one year practical/ teaching experience.

OR

Diploma in Engineering or its equivalent in Printing Technology from


Haryana State Board of Technical Education, with two years practical/
teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/ P.O.T.,
from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an Industrial


establishment covered under Apprenticeship Act or in a recognized
technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall be


relaxed if the candidate possesses equivalent technical qualification as
certified by Director General, Rehabilitation, Ministry of Defence, or Director
General Employment and Training, Government of India.

Age: 17-42 Years


Pay Scale: FPL -6 (35400-112400).

Cat. No.14 44 posts of Mechanic Refrigeration and Air Conditioning Instructor


(Theory) (Re-Advertised).

(GEN=15, SC=9, BCA=5, BCB=4, ESM-GEN=4, ESM-SC=1, ESM-BCA=2,


ESM-BCB=2, ESP-SC=1, ESP-BCA=1) TOTAL=44. PHC-OH=1

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or its


equivalent in Mechanical/Electrical/Refrigeration and Air Conditioning
from AICTE recognized institution/ university or Institutions established
by Ministry of Human Resource Development (MHRD), Government of
India, on full time regular mode basis, with one year practical/ teaching
experience.

OR

Diploma in Engineering or its equivalent in Mechanical/Electrical/


Refrigeration and Air Conditioning from Haryana State Board of
Technical Education, with two years practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate possessing


Craft Instructor Training Course in relevant trade/ P.O.T., from NCVT
recognized institute;

b) Experience should be in the concerned trade/ field in an Industrial


establishment covered under Apprenticeship Act or in a recognized
technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall be


relaxed if the candidate possesses equivalent technical qualification as
certified by Director General, Rehabilitation, Ministry of Defence, or Director
General Employment and Training, Government of India.

Age: 17-42 Years


Pay Scale: FPL -6 (35400-112400)

Cat. No.15 100 posts of Electrician Instructor (Theory) (Re-Advertised).

(GEN=34, SC=20, BCA=15, BCB=9, ESM-GEN=9, ESM-SC=3, ESM-


BCA=3, ESM-BCB=3, ESP GEN=1, ESP-SC=1, ESP-BCA=1, ESP-BCB=1,
TOTAL=100, PHC-VH=1, HH=1, OH=1, Bench Mark =1

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or its


equivalent in Electrical from AICTE recognized institution/ university or
Institutions established by Ministry of Human Resource Development
(MHRD), Government of India, on full time regular mode basis, with one
year practical/ teaching experience.

OR

Diploma in Engineering or its equivalent in Electrical from Haryana State


Board of Technical Education, with two years practical/ teaching
experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate possessing


Craft Instructor Training Course in relevant trade/ P.O.T., from NCVT
recognized institute;

b) Experience should be in the concerned trade/ field in an Industrial


establishment covered under Apprenticeship Act or in a recognized
technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall be


relaxed if the candidate possesses equivalent technical qualification as
certified by Director General, Rehabilitation, Ministry of Defence, or Director
General Employment and Training, Government of India.

Age: 17-42 Years


Pay Scale: FPL -6 (35400-112400)

Cat. No.16 35 posts of Mechanic Electronics Instructor (Theory) (Re-Advertised).


(GEN=14, SC=6, BCA=4, BCB=3, ESM-GEN=3, ESM-SC=1, ESM-BCA=1,
ESM-BCB=1, ESP-SC=1, ESP-BCA=1) TOTAL=35, PHC- HH=1.

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or its


equivalent in Electronics/Electronics & Communications from AICTE
recognized institution/ university or Institutions established by Ministry
of Human Resource Development (MHRD), Government of India, on full
time regular mode basis, with one year practical/ teaching experience.

OR

Diploma in Engineering or its equivalent in Electronics/Electronics &


Communications from Haryana State Board of Technical Education, with
two years practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate possessing


Craft Instructor Training Course in relevant trade/ P.O.T., from NCVT
recognized institute;

b) Experience should be in the concerned trade/ field in an Industrial


establishment covered under Apprenticeship Act or in a recognized
technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall be


relaxed if the candidate possesses equivalent technical qualification as
certified by Director General, Rehabilitation, Ministry of Defence, or Director
General Employment and Training, Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP

Cat. No.17 3 posts of Interior Decoration and Designing Instructor (Theory) (Re-
Advertised).

(GEN=3)

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or its


equivalent in Architecture / Civil / Interior Decoration & Designing
from AICTE recognized institution/ university or Institutions established
by Ministry of Human Resource Development (MHRD), Government of
India, on full time regular mode basis, with one year practical/ teaching
experience.

OR

Diploma in Engineering or its equivalent in Architecture / Civil / Interior


Decoration & Designing from Haryana State Board of Technical
Education, with two years practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate possessing


Craft Instructor Training Course in relevant trade/ P.O.T., from NCVT
recognized institute;

b) Experience should be in the concerned trade/ field in an Industrial


establishment covered under Apprenticeship Act or in a recognized
technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall be


relaxed if the candidate possesses equivalent technical qualification as
certified by Director General, Rehabilitation, Ministry of Defence, or
Director General Employment and Training, Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP

Cat. No.18 7 posts of Mechanic Consumer Electronics Instructor (Theory) (Re-


Advertised).

(GEN=3, SC=1, BCA=1, BCB=1, ESM GEN=1, TOTAL=7

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or its


equivalent in Electronics / Electronics and Communication from AICTE
recognized institution/ university or Institutions established by Ministry of
Human Resource Development (MHRD), Government of India, on full time
regular mode basis, with one year practical/ teaching experience.

OR

Diploma in Engineering or its equivalent in Electronics / Electronics and


Communication from Haryana State Board of Technical Education, with two
years practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/ P.O.T., from
NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an Industrial


establishment covered under Apprenticeship Act or in a recognized
technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall be


relaxed if the candidate possesses equivalent technical qualification as
certified by Director General, Rehabilitation, Ministry of Defence, or Director
General Employment and Training, Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP

Cat. No.19 3 posts of Mechanic Machine Tool Maintenance Instructor (Theory)


(Re-Advertised).

(General Category Only)

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or its


equivalent in Mechanical / Production /Industrial from AICTE
recognized institution/ university or Institutions established by Ministry
of Human Resource Development (MHRD), Government of India, on full
time regular mode basis, with one year practical/ teaching experience.

OR

Diploma in Engineering or its equivalent in Mechanical / Production


/Industrial from Haryana State Board of Technical Education, with two
years practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate possessing


Craft Instructor Training Course in relevant trade/ P.O.T., from NCVT
recognized institute;
b) Experience should be in the concerned trade/ field in an Industrial
establishment covered under Apprenticeship Act or in a recognized
technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall be


relaxed if the candidate possesses equivalent technical qualification as
certified by Director General, Rehabilitation, Ministry of Defence, or
Director General Employment and Training, Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP

Cat. No.20 7 posts of Sheet Metal Worker Instructor (Theory) (Re-Advertised).

(GEN=3, SC=1, BCA=1, BCB=1, ESM-GEN=1) Total=7

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or its


equivalent in Mechanical/ Metallurgical/ Production/ Industrial/
Fabrication from AICTE recognized institution/ university or
Institutions established by Ministry of Human Resource Development
(MHRD), Government of India, on full time regular mode basis, with one
year practical/ teaching experience.

OR

Diploma in Engineering or its equivalent in Mechanical/ Metallurgical/


Production/ Industrial/ Fabrication from Haryana State Board of
Technical Education, with two years practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/ P.O.T.,
from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an Industrial


establishment covered under Apprenticeship Act or in a recognized
technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall be


relaxed if the candidate possesses equivalent technical qualification as
certified by Director General, Rehabilitation, Ministry of Defence, or
Director General Employment and Training, Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP

Cat. No.21 35 posts of Wireman Instructor (Theory) (Re-Advertised).

(GEN=14, SC=6, BCA=4, BCB=3, ESM-GEN=3, ESM-SC=1, ESM-


BCA=1, ESM-BCB=1, ESP-SC=1, ESP-BCA=1) TOTAL=35 PHC- HH=1

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or its


equivalent in Electrical from AICTE recognized institution/ university
or Institutions established by Ministry of Human Resource Development
(MHRD), Government of India, on full time regular mode basis, with one
year practical/ teaching experience.

OR

Diploma in Engineering or its equivalent in Electrical from Haryana


State Board of Technical Education, with two years practical/ teaching
experience.
ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/ P.O.T.,
from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an Industrial


establishment covered under Apprenticeship Act or in a recognized
technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall be


relaxed if the candidate possesses equivalent technical qualification as
certified by Director General, Rehabilitation, Ministry of Defence, or
Director General Employment and Training, Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 35400-112400 Pre-revised 9300-34800+3600 GP

Cat. No.22 32 posts of Millwright Mechanic (Mechanical) Instructor (Theory)


(Re-Advertised).

(GEN=12, SC=5, BCA=4, BCB=3, ESM-GEN=3, ESM-SC=1, ESM-


BCA=1, ESM-BCB=1, ESP-SC=1, ESP-BCA=1) TOTAL=32, PHC- HH=1

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or its


equivalent in Mechanical/Mechatronics/Instrumentation from AICTE
recognized institution/ university or Institutions established by Ministry
of Human Resource Development (MHRD), Government of India, on full
time regular mode basis, with one year practical/ teaching experience.

OR

Diploma in Engineering or its equivalent in


Mechanical/Mechatronics/Instrumentation from Haryana State
Board of Technical Education, with two years practical/ teaching
experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/ P.O.T.,
from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an Industrial


establishment covered under Apprenticeship Act or in a recognized
technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall be


relaxed if the candidate possesses equivalent technical qualification as
certified by Director General, Rehabilitation, Ministry of Defence, or
Director General Employment and Training, Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP.

Cat. No.23 14 posts of Millwright Mechanic (Electrical/Electronics)


Instructor (Theory) (Re-Advertised).

(GEN=5, SC=3, BCA=2, BCB=2, ESM-GEN=2) TOTAL=14.

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or


its equivalent in Electrical/Mechatronics/ Electronics from AICTE
recognized institution/ university or Institutions established by
Ministry of Human Resource Development (MHRD), Government of
India, on full time regular mode basis, with one year practical/
teaching experience.

OR

Diploma in Engineering or its equivalent in Electrical/


Mechatronics / Electronics from Haryana State Board of Technical
Education, with two years practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/
P.O.T., from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an


Industrial establishment covered under Apprenticeship Act or in a
recognized technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall


be relaxed if the candidate possesses equivalent technical
qualification as certified by Director General, Rehabilitation,
Ministry of Defence, or Director General Employment and Training,
Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400) Pre-revised 9300-34800+3600 GP

Cat. No.24 20 posts of Painter (General) Instructor (Theory) (Re-Advertised).

(GEN=8, SC=4, BCA=2, BCB=2, ESM-GEN=2, ESM-SC=1, ESM-


BCB=1) TOTAL=20.

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or


its equivalent in Paint Technology/ Master’s Degree in Painting from
AICTE recognized institution/ university or Institutions established
by Ministry of Human Resource Development (MHRD), Government of
India, on full time regular mode basis, with one year practical/
teaching experience.

OR

Diploma in Engineering or its equivalent in Paint Technology /


Surface Technology from Haryana State Board of Technical
Education, with two years practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/
P.O.T., from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an


Industrial establishment covered under Apprenticeship Act or in a
recognized technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall


be relaxed if the candidate possesses equivalent technical
qualification as certified by Director General, Rehabilitation,
Ministry of Defence, or Director General Employment and Training,
Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400)Pre-revised 9300-34800+3600 GP
Cat. No.25 3 posts of Plastic Processing Operator Instructor (Theory) (Re-
Advertised).

(GEN=3)

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or


its equivalent in Plastic Processing/ Plastic Technology /
Polymer/Plastic Mould from AICTE recognized institution/
university or Institutions established by Ministry of Human Resource
Development (MHRD), Government of India, on full time regular mode
basis, with one year practical/ teaching experience.

OR

Diploma in Engineering or its equivalent in Plastic Processing/


Plastic Technology / Polymer/Plastic Mould from Haryana State
Board of Technical Education, with two years practical/ teaching
experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/
P.O.T., from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an


Industrial establishment covered under Apprenticeship Act or in a
recognized technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall


be relaxed if the candidate possesses equivalent technical
qualification as certified by Director General, Rehabilitation,
Ministry of Defence, or Director General Employment and Training,
Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400)Pre-revised 9300-34800+3600 GP

Cat. No.26 1 post of Foundry man (Moulder) Instructor (Theory) (Re-


Advertised).

(GEN=1)

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or


its equivalent in Metallurgical/Mechanical from AICTE recognized
institution/ university or Institutions established by Ministry of
Human Resource Development (MHRD), Government of India, on full
time regular mode basis, with one year practical/ teaching
experience.

OR

Diploma in Engineering or its equivalent in


Metallurgical/Mechanical from Haryana State Board of Technical
Education, with two years practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/
P.O.T., from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an


Industrial establishment covered under Apprenticeship Act or in a
recognized technical institution;
c) In case of Ex-serviceman, Craft Instructor Training course shall
be relaxed if the candidate possesses equivalent technical
qualification as certified by Director General, Rehabilitation,
Ministry of Defence, or Director General Employment and Training,
Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400)Pre-revised 9300-34800+3600 GP

Cat. No.27 36 posts of Plumber Instructor (Theory) (Re-Advertised).

(GEN=14, SC=6, BCA=4, BCB=3, ESM-GEN=3, ESM-SC=1, ESM-


BCA=2, ESM-BCB=1, ESP-SC=1, ESP-BCA=1) TOTAL=36, PHC-
OH=1.

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology


or its equivalent in Architecture/ Civil from AICTE recognized
institution/ university or Institutions established by Ministry of
Human Resource Development (MHRD), Government of India, on
full time regular mode basis, with one year practical/ teaching
experience.

OR

Diploma in Engineering or its equivalent in Architecture/ Civil from


Haryana State Board of Technical Education, with two years
practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/ P.O.T.,
from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an


Industrial establishment covered under Apprenticeship Act or in a
recognized technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall


be relaxed if the candidate possesses equivalent technical
qualification as certified by Director General, Rehabilitation, Ministry
of Defence, or Director General Employment and Training,
Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400)Pre-revised 9300-34800+3600 GP

Cat. No.28 5 posts of Instrument Mechanic Instructor (Theory) (Re-


Advertised).

(GEN=3, SC=1, BCA=1) TOTAL=5.

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or


its equivalent in Instrumentation /Instrumentation &
Control/Electronics & Instrumentation from AICTE recognized
institution/ university or Institutions established by Ministry of
Human Resource Development (MHRD), Government of India, on full
time regular mode basis, with one year practical/ teaching
experience.

OR
Diploma in Engineering or its equivalent in
Instrumentation/Instrumentation & Control/Electronics &
Instrumentation from Haryana State Board of Technical Education,
with two years practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/
P.O.T., from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an


Industrial establishment covered under Apprenticeship Act or in a
recognized technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall


be relaxed if the candidate possesses equivalent technical
qualification as certified by Director General, Rehabilitation,
Ministry of Defence, or Director General Employment and Training,
Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400)Pre-revised 9300-34800+3600 GP

Cat. No.29 3 posts of Mechanic Agriculture Machinery Instructor (Theory)


(Re-Advertised).

(GEN=3)

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology


or its equivalent in Mechanical/Agriculture from AICTE
recognized institution/ university or Institutions established by
Ministry of Human Resource Development (MHRD), Government of
India, on full time regular mode basis, with one year practical/
teaching experience.

OR

Diploma in Engineering or its equivalent in Mechanical/Agriculture


Engineering / Agriculture Technology from Haryana State Board
of Technical Education, with two years practical/ teaching
experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/
P.O.T., from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an


Industrial establishment covered under Apprenticeship Act or in a
recognized technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall


be relaxed if the candidate possesses equivalent technical
qualification as certified by Director General, Rehabilitation,
Ministry of Defence, or Director General Employment and Training,
Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400)Pre-revised 9300-34800+3600 GP

Cat. No.30 4 posts of Architectural Assistant (Theory) (Re-Advertised).


(GEN=3, SC=1) Total=4.

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology


or its equivalent in Architecture from AICTE recognized
institution/ university or Institutions established by Ministry of
Human Resource Development (MHRD), Government of India, on
full time regular mode basis, with one year practical/ teaching
experience.

OR

Diploma in Engineering or its equivalent in Architecture from


Haryana State Board of Technical Education, with two years
practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/
P.O.T., from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an


Industrial establishment covered under Apprenticeship Act or in a
recognized technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall


be relaxed if the candidate possesses equivalent technical
qualification as certified by Director General, Rehabilitation,
Ministry of Defence, or Director General Employment and Training,
Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400)Pre-revised 9300-34800+3600 GP

Cat. No.31 2 posts of Information Technology and Electronics System


Maintenance Instructor (Theory) (Re-Advertised).

(GEN=2)

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or


its equivalent in Electronics/ Electronics & Communications/
Tele-Communication Engineering from AICTE recognized
institution/ university or Institutions established by Ministry of
Human Resource Development (MHRD), Government of India, on full
time regular mode basis, with one year practical/ teaching
experience.

OR

Diploma in Engineering or its equivalent in Electronics/


Electronics & Communications/ Tele-Communication
Engineering from Haryana State Board of Technical Education, with
two years practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/
P.O.T., from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an


Industrial establishment covered under Apprenticeship Act or in a
recognized technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall


be relaxed if the candidate possesses equivalent technical
qualification as certified by Director General, Rehabilitation,
Ministry of Defence, or Director General Employment and Training,
Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400)Pre-revised 9300-34800+3600 GP

Cat. No.32 8 posts of Mechanic Computer Hardware Instructor (Theory)


(Re-Advertised).

(GEN=3, SC=2, BCA=1, BCB=1, ESM GEN=1) Total=8.

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology


or its equivalent in Computer/Electronics from AICTE recognized
institution/ university or Institutions established by Ministry of
Human Resource Development (MHRD), Government of India, on
full time regular mode basis, with one year practical/ teaching
experience.

OR

Diploma in Engineering or its equivalent in Computer/Electronics/,


Computer Hardware from Haryana State Board of Technical
Education, with two years practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/
P.O.T., from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an


Industrial establishment covered under Apprenticeship Act or in a
recognized technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall


be relaxed if the candidate possesses equivalent technical
qualification as certified by Director General, Rehabilitation,
Ministry of Defence, or Director General Employment and
Training, Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400)Pre-revised 9300-34800+3600
GP.

Cat. No.33 13 posts of Tractor Mechanic Instructor (Theory) (Re-


Advertised).

(GEN=5, SC=3, BCA=2, BCB=1, ESM GEN=2) Total=13.

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology


or its equivalent in Mechanical/Automobile/ Agriculture from
AICTE recognized institution/ university or Institutions established
by Ministry of Human Resource Development (MHRD), Government
of India, on full time regular mode basis, with one year practical/
teaching experience.

OR

Diploma in Engineering or its equivalent in Mechanical/


Automobile/ Agriculture from Haryana State Board of Technical
Education, with two years practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.


Note: a) Preference shall be given to degree/ diploma holder candidate
possessing Craft Instructor Training Course in relevant trade/
P.O.T., from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an


Industrial establishment covered under Apprenticeship Act or in a
recognized technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall


be relaxed if the candidate possesses equivalent technical
qualification as certified by Director General, Rehabilitation,
Ministry of Defence, or Director General Employment and Training,
Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400)Pre-revised 9300-34800+3600 GP

Cat. No.34 40 posts of Machinist Instructor (Theory) (Re-Advertised).

(GEN=14, SC=8, BCA=5, BCB=4, ESM GEN=3, ESM SC=1, ESM


BCA=2, ESM BCB=1, ESP-SC=1, ESP-BCA=1) TOTAL=40. PHC-
HH=1

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or


its equivalent in Mechanical/Production/Industrial/Fabrication
from AICTE recognized institution/ university or Institutions
established by Ministry of Human Resource Development (MHRD),
Government of India, on full time regular mode basis, with one year
practical/ teaching experience.

OR

Diploma in Engineering or its equivalent in


Mechanical/Production/Industrial/ Fabrication from Haryana
State Board of Technical Education, with two years practical/
teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/
P.O.T., from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an


Industrial establishment covered under Apprenticeship Act or in a
recognized technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall


be relaxed if the candidate possesses equivalent technical
qualification as certified by Director General, Rehabilitation,
Ministry of Defence, or Director General Employment and Training,
Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400)Pre-revised 9300-34800+3600 GP

Cat. No.35 33 posts of Carpenter Instructor (Theory) (Re-Advertised).

(GEN=12, SC=6, BCA=4, BCB=3, ESM GEN=3, ESM SC=1, ESM


BCA=1, ESM BCB=1, ESP-SC=1, ESP-BCA=1) TOTAL=33, PHC-
HH=1.

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology


or its equivalent in Architecture/Civil from AICTE recognized
institution/ university or Institutions established by Ministry of
Human Resource Development (MHRD), Government of India, on
full time regular mode basis, with one year practical/ teaching
experience.

OR

Diploma in Engineering or its equivalent in Architecture/Civil


from Haryana State Board of Technical Education, with two years
practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/
P.O.T., from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an


Industrial establishment covered under Apprenticeship Act or in a
recognized technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall


be relaxed if the candidate possesses equivalent technical
qualification as certified by Director General, Rehabilitation,
Ministry of Defence, or Director General Employment and Training,
Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400)Pre-revised 9300-34800+3600 GP

Cat. No.36 24 posts of Mechanic Diesel Instructor (Theory) (Re-


Advertised).

(GEN=10, SC=3, BCA=3, BCB=2, ESM GEN=2, ESM SC=1, ESM


BCA=1, ESM BCB=1, ESP-SC=1) TOTAL=24

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or


its equivalent in Mechanical/Automobile from AICTE recognized
institution/ university or Institutions established by Ministry of
Human Resource Development (MHRD), Government of India, on full
time regular mode basis, with one year practical/ teaching
experience.

OR

Diploma in Engineering or its equivalent in Mechanical/Automobile


from Haryana State Board of Technical Education, with two years
practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/
P.O.T., from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an


Industrial establishment covered under Apprenticeship Act or in a
recognized technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall


be relaxed if the candidate possesses equivalent technical
qualification as certified by Director General, Rehabilitation,
Ministry of Defence, or Director General Employment and Training,
Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400)Pre-revised 9300-34800+3600 GP
Cat. No.37 32 posts of Mechanic Motor Vehicle Instructor (Theory) (Re-
Advertised).

(GEN=12, SC=5, BCA=4, BCB=3, ESM GEN=3, ESM SC=1, ESM


BCA=1, ESM BCB=1, ESP-SC=1, ESP-BCA=1) TOTAL=32. PHC-
OH=1

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or


its equivalent in Mechanical / Automobile from AICTE recognized
institution/ university or Institutions established by Ministry of
Human Resource Development (MHRD), Government of India, on full
time regular mode basis, with one year practical/ teaching
experience.

OR

Diploma in Engineering or its equivalent in Mechanical/ Automobile


from Haryana State Board of Technical Education, with two years
practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/
P.O.T., from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an


Industrial establishment covered under Apprenticeship Act or in a
recognized technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall


be relaxed if the candidate possesses equivalent technical
qualification as certified by Director General, Rehabilitation,
Ministry of Defence, or Director General Employment and Training,
Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400)Pre-revised 9300-34800+3600 GP

Cat. No.38 4 posts of Machinist-Grinder Instructor(Theory) (Re-


Advertised).

(GEN=3, SC=1)

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology


or its equivalent in Mechanical/ Production/ Industrial/ Fabrication
from AICTE recognized institution/ university or Institutions
established by Ministry of Human Resource Development (MHRD),
Government of India, on full time regular mode basis, with one year
practical/ teaching experience.

OR

Diploma in Engineering or its equivalent in Mechanical/


Production/ Industrial/ Fabrication from Haryana State Board of
Technical Education, with two years practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/
P.O.T., from NCVT recognized institute;
b) Experience should be in the concerned trade/ field in an
Industrial establishment covered under Apprenticeship Act or in a
recognized technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall


be relaxed if the candidate possesses equivalent technical
qualification as certified by Director General, Rehabilitation,
Ministry of Defence, or Director General Employment and Training,
Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 35400-112400 Pre-revised 9300-34800+3600 GP

Cat. No.39 5 posts of Tool & Die Maker(Dies & Moulds) Instructor (Theory)
(Re-Advertised).

(GEN=3, SC=1, BCA=1) Total=5.

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or


its equivalent in Mechanical/Production/Industrial/Mechanical
(Tool & Dies Maker)from AICTE recognized institution/ university or
Institutions established by Ministry of Human Resource Development
(MHRD), Government of India, on full time regular mode basis, with
one year practical/ teaching experience.

OR

Diploma in Engineering or its equivalent in


Mechanical/Production/Industrial/Mechanical (Tool & Dies
Maker) from Haryana State Board of Technical Education, with two
years practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/
P.O.T., from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an


Industrial establishment covered under Apprenticeship Act or in a
recognized technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall


be relaxed if the candidate possesses equivalent technical
qualification as certified by Director General, Rehabilitation,
Ministry of Defence, or Director General Employment and Training,
Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400)Pre-revised 9300-34800+3600 GP

Cat. No.40 53 posts of Draughtsman (Civil) (Theory) (Re-Advertised).

(GEN=19, SC=9, BCA=7,BCB=4, ESM-GEN=4, ESM-SC=2, ESM-


BCA=3, ESM-BCB=1, ESP-SC=1, ESP-BCA=1) TOTAL=51, PHC-
HH=1, OH=1.

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or


its equivalent in Architecture/Civil from AICTE recognized
institution/ university or Institutions established by Ministry of
Human Resource Development (MHRD), Government of India, on full
time regular mode basis, with one year practical/ teaching
experience.

OR
Diploma in Engineering or its equivalent in Architecture/ Civil
from Haryana State Board of Technical Education, with two years
practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/
P.O.T., from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an


Industrial establishment covered under Apprenticeship Act or in a
recognized technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall be


relaxed if the candidate possesses equivalent technical qualification
as certified by Director General, Rehabilitation, Ministry of Defence,
or Director General Employment and Training, Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400)Pre-revised 9300-34800+3600 GP

Cat. No.41 30 posts of Draughtsman (Mechanical) (Theory) (Re-


Advertised).

(GEN=12, SC=6, BCA=2, BCB=3, ESM-GEN=2, ESM-SC=1, ESM-


BCB=2, ESP-SC=1, ESP-BCA=1) TOTAL=30 PHC- HH=1

E.Q. i) AICTE recognized Bachelor degree in Engineering / Technology or


its equivalent in Mechanical from AICTE recognized institution/
university or Institutions established by Ministry of Human Resource
Development (MHRD), Government of India, on full time regular mode
basis, with one year practical/ teaching experience.

OR

Diploma in Engineering or its equivalent in Mechanical from


Haryana State Board of Technical Education, with two years
practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: a) Preference shall be given to degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/
P.O.T., from NCVT recognized institute;

b) Experience should be in the concerned trade/ field in an


Industrial establishment covered under Apprenticeship Act or in a
recognized technical institution;

c) In case of Ex-serviceman, Craft Instructor Training course shall


be relaxed if the candidate possesses equivalent technical
qualification as certified by Director General, Rehabilitation,
Ministry of Defence, or Director General Employment and Training,
Government of India.

Age: 17-42 Years


Pay Scale: Pay Matrix Level 6 (35400-112400)Pre-revised 9300-34800+3600 GP

Cat. No.42 4 posts of Craft Instructor (women) Fashion Technology


(Theory) (Re-Advertised).

(GEN=3, SC=1) Total=4.

E.Q. i) Full time, regular mode Bachelor Degree in Apparel/Dress Design/


Garment Manufacturing/Fashion Technology from any institute/
University recognized by National Institute of Fashion Technology
(NIFT)/ All India Council of Technical Education/ Haryana State
Board of Technical Education with one year practical/ teaching
experience.

OR

Full time, regular mode Diploma in Apparel/Dress Design/ Garment


Manufacturing/Fashion Technology from Haryana State Board of
Technical Education or National Institute of Fashion Technology
with two year practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note:- Preference shall be given to the degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/P.O.T.
from NCVT recognized institution.

Age: 17-42 Years


Pay Scale: FPL-6 (35400-112400)

Cat. No.43 19 posts of Craft Instructor (women) Hair & Skin Care (Theory)
(Re-Advertised).

(GEN=8, SC=3, BCA=2, BCB=2, ESM GEN=2, ESM SC=1, ESM


BCA=1) Total = 19.

E.Q. i) Full time, regular mode Bachelor Degree in Beauty Culture/


Beauty Culture & Hair Dressing from any institute/University
recognized by National Institute of Fashion Technology (NIFT)/ All
India Council of Technical Education/ Haryana State Board of
Technical Education with one year practical/teaching experience;

OR

Full time, regular mode Diploma in Beauty Culture / Beauty Culture


& Hair Dressing from Haryana State Board of Technical Education
or National Institute of Fashion Technology with two year practical/
teaching experience;

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: Preference shall be given to the degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/P.O.T.
from NCVT recognized institution.

Age: 17-42 Years


Pay Scale: Pay Matrix Level-6 (35400-112400)

Cat. No.44 20 posts of Craft Instructor (women) Dress Making (Theory)


(Re-Advertised).

(GEN=8, SC=3, BCA=2, BCB=2, ESM GEN=2, ESM SC=1, ESM


BCA=1, ESP SC=1) Total = 20.

E.Q. i) Full time, regular mode Bachelor Degree in Apparel/ Dress


Design/ Garment Manufacturing from any institute / University
recognized by National Institute of Fashion Technology (NIFT)/ All
India Council of Technical Education/ Haryana State Board of
Technical Education with one year practical/teaching experience;

OR

Full time regular mode Diploma in Apparel/ Dress Design/ Garment


Manufacturing from Haryana State Board of Technical Education or
National Institute of Fashion Technology with two year practical/
teaching experience;

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: Preference shall be given to the degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/P.O.T.
from NCVT recognized institution.

Age: 17-42 Years


Pay Scale: Pay Matrix Level-6 (35400-112400).

Cat. No.45 4 posts of Craft Instructor (women) Embroidery & Needle Work
(Theory) (Re-Advertised).

(GEN=3, SC=1) Total = 4.

E.Q. i) Full time, regular mode Bachelor Degree in Apparel/Dress Design/


Garment Manufacturing from any institute/ University recognized
by National Institute of Fashion Technology(NIFT)/ All India Council
of Technical Education/ Haryana State Board of Technical
Education with one year practical/ teaching experience.

OR

Full time, regular mode Diploma in Apparel/Dress Design/Garment


Manufacturing from Haryana State Board of Technical Education or
National Institute of Fashion Technology with two year practical/
teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note:- Preference shall be given to the degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/P.O.T.
from NCVT recognized institution.

Age: 17-42 Years


Pay Scale: FPL-6 (35400-112400).

Cat. No.46 13 posts ofCraft Instructor (women) Computer Aided


Embroidery (Theory) (Re-Advertised).

(GEN=5, SC=3, BCA=2, BCB=1, ESM Gen=2) Total=13.

E.Q. i) Full time, regular mode Bachelor Degree in Apparel/Dress Design/


Garment Manufacturing/ Fashion technology from any recognized
institute/ University recognized by National Institute of Fashion
Technology(NIFT)/ All India Council of Technical Education with one
year practical/ teaching experience.

OR

Full time, regular mode Diploma in Apparel/Dress Design/ Garment


Manufacturing/Fashion Technology from Haryana State Board of
Technical Education or National Institute of Fashion Technology
with two year Practical/ teaching experience.

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note:- Preference shall be given to the degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/P.O.T.
from NCVT recognized institution.

Age: 17-42 Years


Pay Scale: Pay Matrix Level-6 (35400-112400).
Cat. No.47 20 posts of Craft Instructor (women) Cutting & Sewing (Theory)
(Re-Advertised).

(GEN=8, SC=3, BCA=2, BCB=2, ESM GEN=2, ESM SC=1, ESM


BCA=1, ESP SC=1) Total=20.

E.Q. i) Full time, regular mode Bachelor Degree in Apparel/ Dress


Design/ Garment Manufacturing from any institute/ University
recognized by National Institute of Fashion Technology (NIFT)/ All
India Council of Technical Education/ Haryana State Board of
Technical Education with one year practical/teaching experience;

OR

Full time regular mode Diploma in Apparel/ Dress Design/ Garment


Manufacturing from Haryana State Board of Technical Education or
National Institute of Fashion Technology with two year practical/
teaching experience;

ii) Hindi/ Sanskrit upto Matric Standard or higher education.

Note: Preference shall be given to the degree/ diploma holder candidate


possessing Craft Instructor Training Course in relevant trade/P.O.T.
from NCVT recognized institution.

Age: 17-42 Years


Pay Scale: Pay Matrix Level-6 (35400-112400)

Fee Details :
Sr. Category of post General SC/BC candidates of
No. Haryana State only
Male/Female Female Male Female
of
Haryana
resident
only
1. 1 to 9 & 11 to 47 `150/- `75/- `35/- `18/-
2. 10 `100/- `50/- `25/- `13/-
3. Ex-Serviceman of Haryana No Charges
The dependent of ESM and DFF are required to pay the fee as for General,
SC or BCA & BCB Candidates as case may be. Fee once sent with the application form is
neither transferable nor refundable/adjustable. The fee should be deposited through Net
banking or e-Challan in any branch of State Bank of India, Punjab National Bank and
IDBI Bank etc. available on payment site. Candidates are advised to choose their mode of
payment i.e. Net banking or e-Challan while applying online.

Note 1. The posts indicated below were advertised earlier by the Haryana Staff
Selection Commission, Panchkula : -

Sr. Name of the Post New Cat Old Advt. Old


No. No. No. Cat.
No.
1 Turner Instructor Theory 1 10/2017 67
1/2013
2 Fitter Instructor Theory 2 10/2017 43
1/2013 15
3 Welder (Gas & Electric) Instructor Theory 3 10/2017 39
1/2013 49
4 Craft Instructor Stenography (Hindi), Theory 4 9/2017 15
1/2013 11
5 Craft Instructor Stenography (English), Theory 5 9/2017 17
1/2013 7
6 Computer Operator Programming Assistant 6 9/2017 3
Instructor Theory 1/2013 8
7 Senior Instructor Hospitality Theory 7 10/2017 25
8 Food Production Instructor, Theory 8 10/2017 26
9 Food & Beverage Service Instructor, Theory 9 10/2017 27
10 Lab Attendant Food Production Instructor, 10 10/2017 28
Theory
11 Health Sanitary Instructor, Theory 11 9/2017 12
12 Litho offset Machine minder Instructor 12 10/2017 21
13 Mechanic Refrigeration and Air Conditioning 14 9/2017 36
Instructor Theory 1/2013 33
14 Electrician Instructor (Theory) 15 10/2017 3
1/2013 41
15 Mechanic Electronics Instructor (Theory) 16 10/2017 1
1/2013 63
16 Interior Decoration and Designing Instructor 17 10/2017 12
(Theory)
17 Mechanic Consumer Electronics Instructor 18 10/2017 16
(Theory)
18 Mechanic Machine Tool Maintenance 19 10/2017 14
Instructor (Theory)
19 Sheet Metal Worker Instructor(Theory) 20 10/2017 50
1/2013 57
20 Wireman Instructor (Theory) 21 9/2017 30
1/2013 61
21 Millwright Mechanic (Mechanical) Instructor 22 9/2017 28
(Theory) 1/2013 47
22 Millwright Mechanic (Electrical) Instructor 23 9/2017 26
(Theory) 1/2013 21
23 Painter (General) Instructor (Theory) 24 9/2017 41
1/2013 39
24 Plastic Processing Operator Instructor 25 10/2017 23
(Theory) 1/2013 29
25 Foundry man, (Moulder) Instructor (Theory) 26 10/2017 8
1/2013 17
26 Plumber Instructor (Theory) 27 9/2017 39
1/2013 45
27 Instrument Mechanic Instructor (Theory) 28 9/2017 34
28 Mechanic Agriculture Machinery Instructor 29 10/2017 33
(Theory)
29 Architectural Assistant (Theory) 30 9/2017 24
30 Information Technology and Electronics 31 10/2017 10
System Maintenance Instructor (Theory) 1/2013 19
31 Mechanic Computer Hardware Instructor 32 10/2017 53
(Theory)
32 Tractor Mechanic Instructor (Theory) 33 10/2017 49
1/2013 25
33 Machinist Instructor (Theory) 34 9/2017 42
1/2013 31
34 Carpenter Instructor (Theory) 35 9/2017 32
1/2013 35
35 Mechanic Diesel Instructor (Theory) 36 9/2017 48
1/2013 37
36 Mechanic Motor Vehicle Instructor (Theory) 37 10/2017 40
1/2013 65
37 Machinist-Grinder Instructor (Theory) 38 10/2017 46
1/2013 43
38 Tool & Die Maker (Dies & Moulds) Instructor 39 10/2017 5
(Theory)
39 Draughtsman (Civil) Instructor (Theory) 40 9/2017 44
1/2013 27
40 Draughtsman (Mechanical) Instructor (Theory) 41 9/2017 46
1/2013 53
41 Craft Instructor (women) Fashion Technology 42 9/2017 22
(Theory) 1/2013 70
42 Craft Instructor (women) Hair & Skin Care 43 9/2017 4
(Theory) 1/2013 77
43 Craft Instructor (women) Dress Making 44 9/2017 6
(Theory) 1/2013 79
44 Craft Instructor (women) Embroidery & Needle 45 9/2017 20
Work 1/2013 73
45 Craft Instructor (women) Computer Aided 46 9/2017 18
Embroidery (Theory)
46 Craft Instructor (women) Cutting & Sewing 47 9/2017 8
(Theory) 1/2013 75

Against these posts no recruitment process could be initiated and


the same were cancelled by the Haryana Staff Selection Commission, Panchkula
vide Public Notice dated 1.5.2015 & 27.04.2018. The candidates who had earlier
applied against the above categories & whose details are available on web site of
Haryana Staff Selection Commission i.e. www.hssc.gov.in will also be eligible
against the re-advertised posts and such candidates will be exempted from the
payment of application fee. However, such candidates will have to apply afresh
alongwith proof of depositing the application fee. They are required to upload the
fee Challan/credit certificate issued by Treasury/e-Challan as the case may be,
alongwith the fresh application form and will produce the original Challan/credit
certificate issued by Treasury /e-Challan at the time test/verification.

Note 1. Where posts are reserved for PHC categories, 4% of vacancies shall be
reserved horizontally for persons with disabilities suffering from (i) Blindness
or low vision (ii) hearing impairment and (iii) Locomotor disability or cerebral
palsy (iv) Person with Benchmark Disability and these Posts are included in
total No. of Posts.

Note 2. If the quota reserved for Ex-servicemen or Backward Classes remains


unfilled due to non-availability of suitable Ex-servicemen or their
dependents or non-availability of suitable candidates from Backward
Classes then there will be 2% reservation for freedom fighter/their
children/grand children to that extent.

Note 3. Reservation in Scheduled Caste (SC), Backward Class (A) & Backward Class
(B), Ex-serviceman (ESM) & Eligible Sports Persons (ESP) are only for
domicile of Haryana State.

Note 4. As per Chief Secretary Letter No. 6/43/2018-1GS.I, dated 20.09.2018, there
is no age relaxation for the Instructors working in Skill Development and
Industrial Training Department, Haryana on contractual basis.

Note 5. Detailed instructions for filling the online application form are available on
the website of HARYANA STAFF SELECTION COMMISSION i.e
www.hssc.gov.in. These must be gone through carefully before filling up the
form. It is advised to download the filled up form take a printout go through
the particulars carefully and then application be uploaded as no request
for change of any particulars shall be entertained at any stage after
uploading of form.
Note 6. In case of any guidance/information/clarification regarding the online filling
of the application form and Advertisement the candidate can call at helpline
No. 0172-5143700 on all working days from 9:00 A.M. to 5:00 P.M.

Procedure/ Instructions for Online Filling Application Form:


Special Instruction:

The prescribed essential qualification does not entitle a candidate for selection. As
per notification G.S.R.-10/const./Art. 309/2018, dated 13.02.2018 issued by General
Administration Department, Haryana Government, the commission shall make selection
and recommendation of the name of the candidates to a department or an office for Group
‘C’ posts on the basis of written exam and there shall be no interview. The scheme of
marks in respect of selection to Group ‘C’ posts shall comprise of total 100 marks, which
is detailed below:-

1. Written exam: 90 marks


2. Socio-Economic criteria and experience: 10 marks
(For details see notification G.S.R.-10/const./Art. 309/2018, dated 13.02.2018)

The written examination will be either on OMR Sheet based or online computer based
(CBT). The decision of the Commission in all matters relating to acceptance or rejection of
an application, eligibility/suitability of the candidates, mode of, and criteria for selection
etc. will be final and binding on the candidates. No inquiry or correspondence will be
entertained in this regard. HSSC reserve the right to increase or decrease the number of
vacancies on administrative grounds. The candidates shall be bound by all the
instructions issued from time to time.

General Instructions:

1. Please read the instructions and procedures carefully before you start filling the
Online Application Form.
2. The candidate should fill all details while filling the Online Application Form.
3. After applying online, Registration No. and Password will be generated.
4. Take print out of the registration no. and password screen for future reference of your
application status and for Reprinting of your online filled application form and e-
Challan form.
5. After successful submission of application candidates can take print out of application
form and e-Challan.
6. The hard copy of application form along with all uploaded documents must be brought
at the time of verification/scrutiny.
7. Candidates are advised to fill their application form carefully such as Name,
Father’s/Mother’s name, Date of Birth and Category, Qualification, obtained
marks, passing year, photo & Signature, fee, etc. After final submission of
application form, no change will be allowed. Candidate will be responsible for any
mistake in the data of application form and fees paid by him/her. No
correspondence will be entertained in this regard.

Relaxation in Age:

i) In the case of Scheduled Caste (SC), Backward Class (A) and Backward Class (B)
the upper age limit is relaxable as per Haryana Govt. instructions.
ii) For Ex-servicemen Candidates, relaxation up to continuous Military service added
by three years is permissible.
iii) The upper age limit in respect of widow, legally separated woman, divorcee,
deserted woman and unmarried woman will be upto 47 years as per Government
instructions.

Reservation of posts:- Reservation will be as per Haryana Government Instructions.

Reservation for persons will be as per Haryana Govt. instructions contained in letter No.
22/10/2013-1GS-III, dated 15.07.2014.

For Disabled ESM/Dependent of Killed/ Disabled in action reservation will be as per


Haryana Govt. instructions contained in letter No. 945-GS-II 72/6451, dated the 6th
March, 1972.

The reservation for ESM will be utilized in the order given below:-

i) Disabled ex-servicemen with disability between 20% to 50%.


ii) Up to two dependents of Service personnel killed/disabled beyond 50%
iii) Other ex-servicemen.

Note:-1. Disabled ex-servicemen will mean ex-servicemen who, while serving in


the Armed Forces of the Union were disabled in operations against the
enemy or in disturbed areas.

Note:-2. The dependents will include besides wife/widow, dependent


sons/daughters.

The dependents of ESM who fulfill all conditions of qualifications, age etc.
prescribed for posts will be considered on merit for the posts reserved for ESM to the
extent of non-availability of suitable ESM candidates .

DESM candidates of Haryana claiming benefit must have valid eligibility


certificate on last date of submission of online application form and will have to produce
the valid Eligibility Certificate from the concerned Zila Sainik Board at the time of
scrutiny. Mere dependent certificate will not be entertained. ESM candidates should also
produce attested photo copy of Identity Card issued by concerned Zila Sainik Board &
Discharge Book at the time of scrutiny.

NONE OF THE PERSON BELOW SHALL FALL WITHIN THE DEFINITION OF WORD
DEPENDENT OF EX-SERVICEMEN IN TERMS OF HARYANA GOVT. LETTER NO.
12/37/79-GSII, DATED 21-11-1980 :-
(i) A person may be working on an adhoc basis against the post advertised or
somewhere else.
(ii) A person may be unemployed at the time of making the application but he may
have other source of income viz. from agriculture, trade, property, Bank Balance
etc.
(iii) A person who is a member of the joint Hindu family and remains dependent upon
the Karta till there is partition in the family or he ceases to be a member of the
joint Hindu family and is obliged to pass on all his income to the Karta and he
draws money for his subsistence from the pool of the joint Hindu family with the
consent of the Karta.
(iv) A candidate who is a member of the joint Hindu family is employed on adhoc basis
but he is otherwise dependent on his father.

Note :- i) The benefit of reservation will be given only to those SC/BCA/BCB and
ESM and Eligible sportsperson candidates who are domicile of Haryana
State. The SC/BCA/BCB candidates are required to submit
SC/BCA/BCB Certificate duly issued by the competent authority at the
time of scrutiny. Likewise the Eligible Sports Person shall be required
to produce the Sports Gradation Certificate as per Government
instructions duly issued by the competent authority. DESM shall be
required to produce the Valid Eligibility Certificate duly issued by the
respective Zila Sainik Board at the time of scrutiny.

ii) Qualification and other term and conditions of eligibility will be


determined with regard to the last date fixed for receipt of online
applications.
iii) Candidates applying for a post must ensure that they fulfill all the
eligibility conditions on the last date of application. If on verification
at any time before or after the written examination or scrutiny or
appointment, it is found that they do not fulfill any of the eligibility
condition or it is found that the information furnished is false or
incorrect their candidature will be cancelled.

A candidate whether he belongs to General or reserved category viz. SC,


BCA, BCB, ESM/DESM, DFF or ESP can submit only one online application form for a
particular category of post advertised. The special instructions for online applications as
given on website www.hssc.gov.in must be carefully read to help in understanding and
filling in the application form. No offline form will be accepted. All the relevant columns
of the application form should be filled in.

Printed Copy: Printed copy of the application form with original certificates and
photocopy of self attested certificates must be brought by the candidate at the time of
scrutiny /verification alongwith Photo, Identity Proof i.e. Identity Card/Driving
License/Passport/Voter Card/Pan Card/Aadhar Card etc.

Action against candidates found guilty of misconduct :-

Candidates are warned that they should not furnish any particulars that
are false, tampered/fabricated or should not suppress any material information while
filling up the application form.
At the time of written examination/scrutiny, if a candidate is (or has been)
found guilty of : (i) using unfair means during the examination or (ii) impersonating or
procuring impersonation by any person or (iii) misbehaving in the examination hall or
taking away the question booklet or any part thereof/answer sheet from the examination
hall or (iv) resorting to any irregular of improper means in connection with his/her
candidature for selection or (v) obtaining support for his/her candidature by any unfair
means. (vi) Not complying with instructions issued from time to time, such a candidate
may, in addition to rendering himself/herself liable to criminal prosecution, be liable :-
(a) to be disqualified from the examination/scrutiny for which he/she is a
candidate.
(b) to be debarred either permanently or for a specified period, from any
examination or recruitment conducted by HSSC.
(c) for termination of service, if he/she already in Govt. Service.

Note:- HSSC reserves the rights to supervise the complete recruitment


process from online application to selection by way of using Biometric
process and CCTV Cameras/ Videography etc.

Fake Institutions:-

Candidates, who have obtained degrees or diplomas or certificates for


various courses from any institution declared fake by the University Grants Commission
or not recognized by Haryana Government shall not be eligible for being considered for
recruitment to the posts advertised and no representation in this regard shall be
entertained.

Serving Government Employees:-

Serving Government Employees have to produce no objection certificate as


obtained by him before cutoff date from their Head of department at the time of
verification/scrutiny.

DOCUMENTS TO BE UPLOADED WITH APPLICATION FORM

i) Scanned Copy of Essential Qualifications i.e. Matric showing Date of Birth and
mark sheet of 10+2/Graduation/Diploma/Degree etc.
ii) Scanned Copy of Sport Gradation Certificate in case of Eligible Sports Persons,
duly issued by the Competent Authority.
iii) Scanned Copy of Haryana Domicile Certificate in case of BCA/BCB/SC/ESM/
DESM/DFF and women issued by competent authority.
iv) Copy of Challan/credit certificate issued by Treasury/e-Challan as the case may
be, in case of candidates who have applied earlier.
v) Scanned Photographs duly signed by the Candidate.
vi) Scanned signatures of the Candidate.
DOCUMENTS TO BE BROUGHT AT THE TIME OF SCRUTINY/SELECTION.

i) All original certificates/documents/testimonials of educational qualifications and


other documents mentioned in the online applications and one set of self attested
copies of all these certificates.
ii) Printed Copy of online application form alongwith latest stamp size photograph
duly attested by a gazetted officer and pasted on the application form alongwith
date on photograph.

iii) Original proof of earlier fee deposited i.e. Treasury Challan / Credit Certificate
issued by concerned treasury etc.

LIKELY CAUSES OF REJECTION OF APPLICATION: -

The following are likely causes of rejection:-

➢ More than one application form for a particular category.


➢ Application is incomplete and not online.
➢ Full fee, if not deposited in the manner prescribed.
➢ No qualification of Hindi/Sanskrit as prescribed in advertisement.
➢ Applicant does not possess the requisite academic qualification on cutoff date.
➢ Applicant does not indicate visible identification mark in appropriate column of
application form.
➢ Candidate is underage/overage on the cutoff date/closing date.
➢ Variation in data of online application form and in original documents when
brought for verification/scrutiny.
➢ Lack of essential qualification as prescribed in advertisement.

USE OF MOBILE PHONE AND OTHER ELECTRONICS DEVICE IN HARYANA STAFF SELECTION
COMMISSION EXAMINATION/ SCURTINY OF DOCUMENTS IS STRICTLY PROHIBITED.

-sd-
Place : Panchkula Secretary,
Dated: 26th December, 2018 Haryana Staff Selection Commission,
Panchkula.

You might also like