Professional Documents
Culture Documents
12 2019
Moving Forward
Cantrell Develops Industry Leading
Vacuum Transport Systems
Cantrell has set the industry standard in
Vacuum Transport Systems for 35 years.
“We are continually seeking ways to assist our customers and expand the line of products we offer,” Cantrell
Continued on page 4
Paw Transport System, Cantrell was among the first to successfully transport paws in an air conveying system.
The Paw Transport System is cost efficient to operate, using a low horsepower power source and needs little to no
water to operate. Clean in place (CIP) system controls can be incorporated into the main system controller. Control
Systems can be customized for a plant’s needs. It has an integrated clean in place control system, status monitoring
and CIP time traceability.
House Vacuum Systems are used for lung guns, FIM and fat pullers. Cantrell has installed systems that work with
Stork, Meyn and Apec.
If you need a Custom Vacuum System, Cantrell can develop, design and manufacture custom vacuum systems for
specific needs.
“We’ve been building and installing vacuums systems for a long time,” Jones said. “Our systems have stood the test
of time, working well in various plant setups. We have the expertise to customize them for any plant.”
Scott Russell Joins Cantrell as Director of
International Sales
Cantrell has named Scott Russell as Director of International Sales.
Russell will be responsible for growing Cantrell’s international business for
capital sales, projects, service sales, parts and service agreements with a
primary focus on Latin America and Canada.
“Scott brings a wealth of experience working in the international (food
processing) market,” says Dane Woods, Cantrell’s General Manager of Sales/
Service/Engineering. “He has built solid relationships and has invaluable
knowledge as we expand into Latin America and Canada. Scott is a great
addition to our company.”
Russell graduated from Auburn University with a BS in Engineering.
He has nearly 40 years of experience in the poultry industry with most of his experience in international
sales. He has served as President/CEO of Commercial Operations Americas, Director of International Sales,
and Global Sales Director for two major OEM capital food processing equipment companies.
MAINTENANCE TIPS
Cantrell Oil Sac Cutter OSC-1300
Daily / Each Shift
• Wash Down and Clean Thoroughly; Adjust Machine
as Required
• Blades – Check for Wear. Sharpen or Replace
as Needed.
• Chains – Spray with Lubricant
• Check Shear Pin
Weekly
• Guide Bars – Check and Verify They Are Not Bent Out of Adjustment
• Bearings – Grease
• Housings – Lubricate with 90W
• Gearheads – Lubricate with 90W
• Transfers – Grease
Preventive Maintenance Program ensures optimum life and performance with any equipment.
Murzan Pumps Continued from page 2
Parts can be purchased individually, or they can be
purchased as a spare parts kit. A spare parts kit can
be specifically designed for the type of pump used in your
operation.