Professional Documents
Culture Documents
MUFFLERS . . . . . . . . . . . . . . . . . . . . . . . .154
❑❑❑-1❑❑-❑❑-❑
SAS Sub-Miniature Air Switch
Nominal Actuation
MAS Miniature Air Switch
Pressure*
06 6 psig
Design Series
20 20 psig
40 41 psig
Switch Current Rating:
65 65 psig
SAS
MN Manual
A 5A @ 125/250 VAC
3A @ 30 VDC/.1A 60 VDC
X no switch Inlet Port:
Blank #10-32 thd
MAS F 1/8” NPT female
Medium: Air B 3A @ 125/250 VAC P 1/8” NPT male
3A @ 30 VDC
Inlet Pressure: 5 to 150 psig
C 10A @ 125/250 VAC
Pilot Port: #10-32, 1/8” NPT RoHS 5A @ 50 VDC
Mounting: External thread and nut for panel, bracket,
or bulkhead mounting,
5/8 - 32 pressure actuated Switch Terminals:
#15/32-32 manually operated SAS: 0 no switch *Actuation pressure is nominal
Accuracy: Actuation pressures listed are nominal values 1 110 series Q.C. only. For applications where
only. For applications where a tight tolerance for accuracy is critical, please
MAS: 0 no switch contact Clippard.
actuation or deactuation is needed, please contact
Clippard. 2 187 series Q.C.
3 screw terminals
2-56 switch
N.C. N.O. COM mounting screw -F Model
0.260 0.260 Shown 0.260
0.780
0.750
0.500 B A
0.656 mounting holes
0.406 for #6 screw 0.687
1.937
NORMALLY
0.250 0.468
CLOSED
Rating D.C.: 125 volts - 0.5 amperes Maximum Pressure: 8 psig (continuous)
250 volts - 0.25 amperes Construction: ABS plastic case gold plated contacts
natural rubber diaphragm
Mounting: #15/32-32 thread; nut and lockwashers furnished, also two
0.140” dia. mounting holes in body Use: For interfacing fluidic or
other low pressure air signals with
Electronic circuitry dual inputs View additional
Approvals: UL and CE
operates on pressure, vacuum, or information and
Part No. Description differential pressure signals useful videos
ES-1 Single Pole, Double Throw Snap-Action Electrical Switch
15601 Terminal Cover Part No. Description
5100-3-NO Pneumatic Electric Switch, Normally-Open Contacts
5100-3-NC Pneumatic Electric Switch, Normally-Closed Contacts
If you need a product that fits your application perfectly, Clippard has
CUSTOM er the capability to design or modify one of its products to suit your exact
needs. We understand that a standard catalog product may be close but
solutions not be exactly what you need. Let us know YOUR Need, and we will
help to find YOUR Solution!
The non-relieving regulator does not automatically compensate Input Pressure: 300 psig RoHS
for changes in downstream flow or pressure. There is no vent to Mounting: #15/32-32 thread. Nuts and lockwashers furnished
atmosphere, as in a relieving type regulator, and the output pres- Adjustment: By means of a knob with micro-adjustment (40
sure can increase due to a downstream event. pitch thd.)
exhaust 3
#10-32 outlet 2
#10-32 inlet 1 15/32-32 thd.
3
1 2
0.590 0.312
exhaust 3
0.300
#10-32 inlet 1
#10-32 outlet 2 15/32-32 thd. 0.375 0.218
0.375
0.687 2.046 0.437
1.000
dia.
• Robust
Industrial Dental
• Compact
• Reliable
• Multiple Medias
• Manifold Mount
• Cartridge Style
• Preset to Pressure
• Pre-Assembled & Tested
Metric line available. Visit www.clippard.com
3/8" 0.750 Air Flow: 6.5 scfm @ 50 psig; 11.5 scfm @ 100 psig
hex. 0.156
#10-32 inlet 1 #10-32 outlet 2
Air Flow: 20 scfm @ 50 psig; 36 scfm @ 100 psig 1/8" NPT inlet 1
9/16" 1/8" NPT outlet 2
1.437 hex. Part No.
MJCV-1BA
2 1
13/16"
11/16" 2.222
1.875 hex. hex.
For specialty
Function/Porting Options
options such as
various seal Pilot-Operated High Flow
Check Valve 2-Way Valve
Pilot-Operated Check Valves work as standard check valves, materials, manual
Port 3 (pilot) Port 3 (pilot)
but can be opened with an air pilot signal to permit free flow override, or
in the normally “checked” direction. The Clippard Pilot- specific pilot to
supply ratios, Port 1
Operated Check Valve provides the user with a reliable (cylinder Port 2 Port 1 Port 2
please consult port) (input) (supply) (output)
method to check flow in one direction, with the ability to factory.
remotely signal a free flow through the valve. Ideal for any
circuit that requires this useful function—all in one valve Flow-to-Supply Pressure
25
that is easy to connect!
• High flow valve means low pressure drop 20
0
0 10 20 30 40 50 60 70 80 90 100
Supply Pressure (psig)
35
port 3 port 3
30
#10-32 thd. #10-32 thd.
25
20
port 1
port 1
1/8” NPT
1/8” NPT
1.711 0.897
Part No. Part No.
JPC-3FPN* JPC-2NPN 0.500 port 3
flats 1/8” NPT
port 3
1/8” NPT
port 3
#10-32 thd.
0.250
port 1
port 1 1/4” NPT
port 1 1/8” NPT
#10-32 thd.
1.147
Part No. 0.897
0.156
Part No. 1.147 Part No.
JPC-2NLN JPC-3FPF* JPC-3FQF*
* Also available in corrosion-resistant materials. Add “CR-” to the beginning of the Part No.
2
#5-80 thd.
MNV-2
1
15˚ 5˚ 20˚
3˚
3˚
1 2 3 4 5 6 7 8
Number of Needle Turns
Input Pressure: 2,000 psig max. Input Pressure: 2,000 psig max.
Air Flow: 3 scfm @ 50 psig; 6 scfm @ 100 psig Air Flow: 3 scfm @ 50 psig; 6 scfm @ 100 psig
Part No. Description Part No. Description
MNV-1 Needle Valve, #10-32, Screwdriver Slot MNV-1P Needle Valve, 1/8” NPT, Screwdriver Slot
MNV-1K Needle Valve, #10-32, Knurled Knob MNV-1KP Needle Valve, 1/8” NPT, Knurled Knob
0.156
7/16" 0.328
hex. 0.968 max.
0.125
stem
0.375 0.500 0.500
travel Input Pressure: 2,000 psig max.
#10-32 outlet 2
0.562
1.062 max. Air Flow: 2.5 scfm @ 50 psig; 5 scfm @
100 psig
Input Pressure: 300 psig max.
Part No. Description
Air Flow: 1 scfm @ 50 psig; 2.5 scfm @ 100 psig
MNV-3 Needle Valve, #10-32, Screwdriver Slot
Part No. Description MNV-3K Needle Valve, #10-32, Knurled Knob
MNV-2 Needle Valve, #10-32, Screwdriver Slot
MNV-2K Needle Valve, #10-32, Knurled Knob Metric line available. Visit www.clippard.com
0.250 dia.
7/16"
hex. 1/8" NPT
#10-32 0.406 0.406 0.406
inlet 1
outlet 2 flow full open full open full open
adjustment
0.593
0.281
0.328 0.156
1.187 max.
#10-32 inlet 1
0.390 "B"
"B"
Input Pressure: 2,000 psig max. #10-32 outlet 2
Air Flow: 2.5 scfm @ 50 psig; 5 scfm @ Input Pressure: 300 psig max. 0.375 0.375
100 psig
Air Flow: 5 scfm @ 100 psig
Part No. Description
MNV-3P Needle Valve, #10-32, Screwdriver Slot Part No. Side Port ”B” Note: Knurled locking nut standard
MNV-3KP Needle Valve, #10-32, Knurled Knob MNV-4 #10-32 . . . . .0.593
MNV-41 1/16 Barb . . .0.750 Screwdriver Slot
RoHS MNV-42 1/8 Barb . . . .0.906
MNV-4K #10-32 . . . . .0.593
Knurled Knob
MNV-4K1 1/16 Barb . . .0.750
Speed Control Mufflers MNV-4K2 1/8 Barb . . . .0.906
lock nut 0.580 lock nut 0.580 NEW! 3° Cartridge Needle Valves
max. max.
0.264 screwdrive
slot
12 mm 0.710 14 mm 0.703
hex lock
hex nut 0.576
0.505
full
0.318 0.292 0.303 open
hex.
1/8-27 NPT 1/4-18 NPT
SCM-P SCM-Q
0.625
#10-32
0.650 lock nut 0.870
lock nut max.
max.
0.329 0.358
3/8-18 NPT 1/2-14 NPT 0.161 dia.+- 0.001
0.003
-0.750 deep
0.200 dia. ± 0.003-0.477 deep
SCM-W SCM-Z 0.276 dia. ± 0.002-0.375 deep
0.297 dia. ± 0.002-0.230 deep
#10-32 UNF-2B thd.-0.625 deep
Knurled knob length based on minimum thread engagement.
Material: Solid brass body; sintered bronze muffler (40 micron) Input Pressure: 150 psig max.
32 rms
Part No. Description Air Flow: 5 scfm @ 100 psig
SCM-P Muffler, 1/8-27 NPT
SCM-Q Muffler, 1/4-18 NPT Part No. Description
SCM-W Muffler, 3/8-18 NPT MNV-4C 4-Way Needle Cartridge Valve, Screwdriver Slot
SCM-Z Muffler, 1/2-14 NPT MNV-4CK 4-Way Needle Cartridge Valve, Knurled Knob
60
Needle Valves are used to control the rate of flow in a pneu-
matic system by controling flow in both directions. Material
GNV-3
enters the input port, travels through an adjustable orifice and 50 GNV-4
out the output port. Available with multiple port sizes, flow GNV-5
rates, mounting options and adjustment styles.
40
Direct Mount Needle Valves, 1/8” NPT Direct Mount Needle Valves, 1/4” NPT
0.657 0.890
Direct Mount Needle Valves, 3/8” NPT In-Line Mount Needle Valves, 1/8” NPT
1.125
1/8” NPT
(both sides)
0.156 dia.
mtg. holes
In-Line Mount Needle Valves, 1/4” NPT In-Line Mount Needle Valves, 3/8” NPT
3/8” NPT
1/4” NPT 0.203 dia. (both sides)
0.203 dia. (both sides) mtg. holes
mtg. holes
7/16-20 thd.
9/16-18 thd.
60
Flow Controls
MFC-2/MFC-2
Flow vs. Needle Turns
MFC-3/BFC-3
50
JFC-2
JFC-3
40
JFC-4
30
20
#10-32 inlet 1 #10-32 outlet 2 0.312 Adjustment: Knurled knob on needle shaft
0.375 9/16"
hex. #10-80 thd. 0.270 dia.
11 scfm @ 100 #10-32 5/8 hex. adjustment needle adjustment
psig adjustable JFC-2A outlet 2 JFC-2A inlet 1 2 1 needle 0.359/0.485
JFC-2B inlet 1 JFC-2B outlet 2 lock nut
1/8" NPT
Part No. Description 0.288
JFC-2A Meter Out Control Valve, 1/8” NPT
1.479
JFC-2B Meter In Control Valve, 1/8” NPT 0.536 9/16"
dia. sq.
0.536 9/16
11 scfm @ 100
2 1
dia. sq. psig adjustable
1.119
seal
11 scfm @ 100 1/4" push quick
fitting Part No. Description
0.938
psig adjustable universal 1/8" pipe thd.
JFC-3A Meter Out Control Valve, 1/8” NPT
Part No. Description JFC-3B Meter In Control Valve, 1/8” NPT
JFC-3AR Meter Out Control Valve, 1/8” NPT 2 1 JFC-3AP08 Meter Out Control Valve, 1/4” Push-Quick Fitting
JFC-3BR Meter In Control Valve, 1/8” NPT JFC-3BP08 Meter In Control Valve, 1/4” Push-Quick Fitting
JFC-3ARP08 Meter Out Control Valve, 1/4” Push-Quick Fitting
JFC-3BRP08 Meter In Control Valve, 1/4” Push-Quick Fitting
1/4” NPT Valves, Recessed Needle 1/4” NPT Valves, Adjusting Knob
"W"
"W"
11/16" 11/16"
hex. 0-0.066 hex. 0.340-0.62 5
"D" "D"
3/8” NPT Valves, Adjusting Knob 3/8” NPT Valves, Recessed Needle
"W"
7/8" "W"
hex. 0-0.072
7/8" 0.340-0.625
hex. "D"
"D"
3/8” NPT
pipe thread
0.875 or push-
3/8” NPT sq. quick fitting
0.875 pipe thread inlet
or push- 1.920
sq.
quick fitting
1.920 inlet
3/8” NPT
supplied with
3/8” NPT pre-applied
supplied with sealant outlet
pre-applied
sealant
outlet
(JFC-5K-P12 shown) (JFC-5R-P12 shown)
The PQ-C Elbow Controls are ideal for low cost and lightweight
applications when mounting directly to an NPT port on a cylinder
or valve is required.
In the meter-out versions, intake air flows freely through the flow
control; exhaust air is metered out through an adjustment screw.
With the meter-in series, air is metered in through an adjustment
screw; exhaust air flows freely. Control is varied through
a finely threaded adjustment screw. A locking nut is
provided so it can be secured in its final setting.
Medium: Air
Pressure Range: 0 to 150 psig • Small, compact size
• Design flexibility and fast response
Vacuum: 0 to 29.5” Hg
• Complete rotation of the valve body around the bolt allows
Ports: #10-32, 1/8” NPT, 1/4” NPT, 3/8” NPT, 1/2” NPT for optimum positioning of tubing
Adjustment: Knurled knob • Special adjustment needle design allows large adjustment
ranges with high precision
Material: Nickel plated brass, plastic resin, stainless steel
• Ideal for use with polyurethane, nylon, polyethylene and
gripper ring, Nitrile seals
polypropylene tubing (see www.clippard.com)
Block Flow Controls BFC-2A BFC-2B BFC-2AK BFC-2BK Precision flow controls
BFC-4A BFC-4B BFC-4AK BFC-4BK and needle valves available
BFC-6A BFC-6B BFC-6AK BFC-6BK
BFC-8A BFC-8B BFC-8AK BFC-8BK in blocks for rigid mounting.
BFC-A BFC-B
IN IN IN IN Specification same as MFC-3
0.156
OUT OUT OUT OUT Clippard’s block flow control and needle
knob "L"
(optional) valves have a variety of features that offer extra
0.568 "M"
0.156 versatility for unique applications. These pre-
0.514 0.188 cision made valves offer high performance, low
meter in inlet
cost, reliability and ease of installation. Each
0.438 valve is independent of the other (except the
0.875 0.500 mounting holes
0.161 dia.- thru typ. BFC-2C), sharing only a common body. This
0.239 0.406 meter out inlet allows separate pressures and/or gases to be
#10-32 thd. typ. used while simplifying mounting. Each needle
0.625 0.500 typ.
adjustment is smooth, exact, and includes a
BFC-2C BFC-2CK locking ring to prevent tampering. The valve
Block Flow Controls Two valves common meter in and meter out. body is machined and anodized aluminum;
the compound angle needle stems are ma-
0.156
chined from 303 stainless steel; the valve
sleeve is electroless nickel plated brass; and
knob
IN OUT (optional) 1.312
the seals are Nitrile rubber. Block flow con-
0.568
0.156 1.000 trols and needle valves are ideal for control-
0.514 ling double acting cylinders.
mounting
holes
0.688 0.438 0.161 dia.
- thru typ.
FC - Flow Control
0.875
NV - Needle Valve
0.239 0.406
#10-32 thd. typ. NM - Needle Manifold
0.625 0.500 typ. inlet/outlet
Number of stations
knob
OUT OUT (optional)
"L" 2 - 2 Stations
0.568 0.156 "M" 4 - 4 Stations
0.514 0.188 6 - 6 Stations
8 - 8 Stations
0.438
0.875 inlet
0.500
A - Meter Out Flow
0.239 0.406 mounting holes B - Meter In Flow
0.161 dia.- thru typ. C - 2 Valves Common
0.625 0.500 typ.
#10-32 thd. typ.
outlet Meter In and Meter Out
N - Needle Valve
BNM-2N BNM-4N BNM-6N BNM-8N
Block Needle Manifolds BNM-2NK BNM-4NK BNM-6NK BNM-8NK
Adjustment type
IN 0.156 Blank - Screwdriver Slot
K - Adjustment Knob
OUT OUT knob "L"
0.568
(optional)
0.156 "M"
Number of Stations
#10-32 “X” “L” “M”
0.514 thd. inlet
0.188
2 1.312” 1.000”
0.438
0.875 4 2.312” 2.000”
0.188
0.218 0.406 #10-32 thd. typ. 6 3.312” 3.000”
outlet
0.625 0.500 typ. mounting holes 8 4.312” 4.000”
0.161 dia. - thru typ.
0.793 0.312
3/8" sq. 3/8" sq.
1.156
3/8" sq.
0.562
1/8" I.D.
hose barb
typ. Part No.
Part No. 0.156
MSV-1M44 #10-32 thd. MSV-1FFF
0.937
1.156
3/8" sq.
3/8" sq.
0.562 0.562
1/16" I.D.
hose barb 1/8" I.D.
typ. hose barb
Part No. typ.
Part No.
MSV-1F22 #10-32 thd. MSV-1F44 #10-32 thd.
0.937 1.156
0.562
0.562
1/8" I.D.
1/16" I.D. hose barb
hose barb typ.
Part No. typ. Part No. 0.312
0.187
MSV-1222 MSV-1444
1.281
1.469
0.375
0.375
11/16" 0.625 0.625
hex. 0.343 11/16"
hex. 0.343
Part No. Part No. 0.343
0.343
JSV-2PFF JSV-2WFF
1.250
1.469
0.375
0.375
0.625
0.343
Part No. 0.625 Part No. 11/16" hex. 0.343
JSV-2WYY 11/16" hex. 0.500 JSV-2YFF
0.500
1.250 1.250
0.375 0.375
Exhaust Port
exhausts to atmosphere
Outlet Port
Packaging Solutions
A leader in miniature pneumatics, Clippard provides the packaging in-
dustry a variety of produts and solutions. We understand the needs of
this industry, and are prepared to serve you with our expanding product
lines and expertise in applications.
• Conveying applications
• Case erectors
• Process solutions
• Bottle/container filling
• Palletizing
• Controls for a variety of applications
❑ ❑ ❑ ❑ - ❑ ❑ ❑ ❑ - ❑
ports. This compact poppet type
valve is constructed of brass and is
100% tested to assure the highest
quality. The JEV’s primary function is
to increase cylinder speed. How- Inlet Thread Type Outlet Thread Exhaust
ever, it also enables the use of J-Series Exhaust Valve M - Male Thread Size N - Unthreaded
smaller directional valves, longer JEV - Inlet-to-Outlet 90° F- Female Thread 2 - 1/8” NPT Exhaust
control lines and can be used as a Orientation 4 - 1/4” NPT
shuttle valve. 32 versions available. JLEV - Inlet-to-Outlet
In-line Orientation
1.779
1.312
1/4" NPT Part No.
Part No. outlet
JLEV-F4M4-N
JEV-F4M4
#10-32 outlet 2
1/8" NPT #10-32 inlet 1
2.281
2.156 0.812
Medium: Air
0.406 7/8" hex.
0.375
Input Pressure: 40 to 150 psig max. additional
3 volume port
Mounting: 1/8” NPT thread; nut furnished 2
1.6
1.4
"L" "D"
1.2
Time - Seconds
1
71
and R-711 may be increased by adding 1
Volume PV-1 R-711
R-
Volume Volume standard Clippard volume chambers. -1
CU. IN. Chamber 0.8 PV
The charts show total TIME versus VOL- 0 0.042 0.117
UME for these combinations. PV-1
0.1 MAT-.1 0.1 0.074 0.180 0.6
0.25 MAT-.25 0.25 0.124 0.245 R-711
Suffix Bore “L” “D” Cu.In
0.4
0.50 MAT-.50 0.5 0.210 0.350
0.1 3/8” 1.265” 0.437” 0.1
1.0 MAT-1.0 1.0 0.390 0.450 0.2
0.25 3/8” 2.640” 0.437” 0.25
1.2 R-821 1.2 0.580 0.700
0.5 9/16” 2.390” 0.625” 0.5 0
2.0 MAT-2.0 2.0 0.760 1.000 0.1 0.25 0.5 1.0 1.2 2 2.4 3.6 4.0
1.0 9/16” 4.390” 0.625” 1.0 Volume - CU. IN.
2.4 R-821 (2) 2.4 0.950 1.300
2.0 15/16” 3.328” 1” 2.0 Part No. Description
3.6 R-821 (3) 3.6 1.200 1.900
4.0 15/16” 6.234” 1” 4.0 MAT-(size) In-Line Volume Chamber, #10-32
4.0 MAT-4.0 4.0 1.500 N.R. Specify Size per Chart
R-821 volume charts are shown in the Modular Section of this catalog.
Medium: Air
0.125 dia.
Material: Brass #10-32 thd.
both ends
0.062 travel max.
3/8" hex. 0.375 1 2 Working Range: 0 to 300 psig max.
0.093
1.218
bleed 2 Part No. Description
1/8" NPT inlet 1 5/16-24 thd. MAC-A Air Choke, 0.0135” Hole, Yellow Disk
MAC-B Air Choke, 0.010” Hole, Green Disk
0.125 dia. MAC-C Air Choke, 0.0075” Hole, Blue Disk
MAC-D Air Choke, 0.006” Hole, Red Disk
0.062 travel max.
7/16" hex. 0.375 0.093
1.437 Materials: Brass body, Nitrile seals, stainless
Medium: Air steel stem and spring
Stem Travel: 1/16” max. (will open and close in as little as 0.005”)
Temperature Range: 32 to 230°F
Input Pressure: 300 psig max. Force For Full Stem Travel: 7 oz. nominal
Options: Consult the factory concerning the price
Air Flow: 3 scfm @ 50 psig; 6 scfm @ 100 psig and availability of the following standard
Mounting: #15/16-24 thread. Nut and lockwashers furnished options:
Part No. Description ENP - Electroless Nickel Plating E - EPDM Seals
MPS-2 Poppet Valve with Pilot Sensor, #10-32 V - FKM Seals
MPS-2P Poppet Valve with Pilot Sensor, 1/8” NPT
pneumatic vacuum
-1
0
0
-2
-0.6 -0.4
1.863 -0.8
VACUUM
-0.2
0.750 pressure. Mounting
-5
-25
bracket included.
bar
-1.0 100XkPa 0
in
0
-3
Hg
0
0.833 0.132
15/32-32 thd. 1.000
#10-32 15/32-32 thd. 1/8" NPT
inlet
vent 9/16" hex. Range: Scale reading from 0.385
thd. inlet vent
0 to 30” Hg. and 0 to -1 bar 0.665
#6-32 thd.
0.437 Construction: Nickel-plated steel
dia. 1/8-27 NPT
1.156
case. Plastic face. Dial shows 1.600 #10-32 female thd.
Minimum Actuation Pressure: 15 psig approx. Mounting: Stud mount using 1/8” NPT center stud or panel mount
Response: Approx. 10 milliseconds @ 50 psig RoHS using the zinc plated steel bracket supplied.
30 3 4 70 0.843
IND-3P-(color) Multi-Pin Air Indicator, 1/8” NPT 20
1
2 5
6
80
Single Pin Air Indicator Gauge measures pneumatic system pressure. Stud mounted.
Plunger type (when extended white pin display signals “on”) Range: Scale reading from 0 to 100 psig and 0 to 6.9 bar
nut (2) supplied Construction: Steel case. Plastic face. Dial shows two ranges; psig in
0.062
1/4-40 thd. 5/16" hex.
black. Bars in red. Built-in pressure snubber.
#10-32 thd.
Ports: Connection located at rear is double threaded O.D. - male
0.080 dia.
thread 1/8” NPT; I.D. - tapped for #10-32 fitting
Mounting: Direct with 1/8” NPT
0.055 0.438 1/4" hex.
0.187 Part No. Description
PG-101-BK Pressure Gauge, Black Case
Part No. Description
PG-101-NP Pressure Gauge, Nickel-Plated
IND-1-WH Single Pin Air Indicator
#10-32 thd.
50
40 60
30 3 4 70
20
2 5
80
0.843 0.125
0.750 1 6 1.780 dia.
0.080 dia. 10 0
P S IG7
2
k g /c m 90 1.000
0 100
0.375
0.656
#6-32 thd.
0.055 0.465 0.160 1/4" hex.
1.156 1/8" NPT
1.630 dia. #10-32
Part No. Description Gauge measures pneumatic system pressure. female thd.
0.375
X
View additional
output
information and
supply
useful videos
2010
Non-Contact Gap Sensor will sense any flat or round Input Pressure: 0.5 to 5 psig
object with a 1/32” minimum radius. Produces a Output: -3” to 26” H2O @ 4 psig
positive signal when no object is present and a negative Frequency Response: 1,000 cpm
signal when an object interrupts its sensing system
Air Consumption: 1/4 scfm @ 4 psig
Sensing Capability: Flat or curved surfaces with
1/32” minimum radius. May be used for up to 4”
sensing gap
gap with an additional auxiliary jet
0.750 0.375
0.125 IN Connections: #10-32 female
#10-32
thd. outlet OUT
0.875 0.437
1030
Construction: Solid brass bright dipped
MAR-1-2
0.250
#10-32 X
thd. inlet 30
Positive output
25 no object present
0.625 0.375
output supply
1.250 0.136 dia. mtg. holes 20
2010
15
object sensed no object present
10
Input inches of Hg
Output inches of H2O
5
1 2 3 4 5 6 7 8 9 10
View additional 0
information and -5
Negative output
useful videos -10 object being sensed
Normally-On Single Stage Pressure Repeater Medium: Reference pressure - air sensed
pressure - Air, gas, or liquid
Normally-On Single Stage Pressure Repeater for off-on Input Pressure: 1 to 150 psig max.
control of an adjustable reference pressure when a
sensed pressure moves above or below the reference Air Flow: 0.029” orifice
pressure level
Response Time: 5 milliseconds
Differential Sensitivity: 2%
adjustable reference pressure #10-32 thd. adjustable #10-32 thd. adjustable reference pressure
reference pressure sensed pressure
Normally-Off Two Stage Pressure Repeater Medium: Reference pressure - air sensed pressure -
Air, gas, or liquid
Normally Off Two Stage Pressure Repeater for off- Input Pressure: 1 to 150 psig max.
on control of an adjustable reference pressure when a
Air Flow: 0.029” orifice
sensed pressure moves above or below the reference
pressure level Response Time: 5 milliseconds
Differential Sensitivity: 2%
Frequency Response: 60 Hz
Materials: Anodized aluminum body, Nitrile
diaphragms
1.370 dia.
Part No. Description
1044 Two Stage Pressure Repeater
0.656
1.302
sensed sensed
pressure output off pressure output on
1.092
3-Way Bleed Pressure Piloted Limit Valve; blocking of the sensing Material: Anodized aluminum body,
Nitrile diaphragms
port causes rapid valve opening
1.359 dia. Input Pressure: 30 to 100 psig max.
Air Flow: 22 scfm @ 100 psig;
Bleed: 0.1 scfm @ 100 psig
2.000
Response Time: 15 milliseconds
1/8" NPT
load port 1.203
1.109 Ports: 1/8” NPT
1/8" NPT
exhaust port 0.609
1/8" NPT
Part No. Description
supply port 2011-1 Piloted Limit Valve,
1/8” NPT
Top View Side View
Bleed (open)
Rubber Nozzles
#10-32 rubber
Bleed (closed) nozzles for replace-
2011-1 ment 2011-1 limit
valves. #10-32 thread,
five to a package
0.031 dia. 25˚
Exhaust Exhaust
(open) (blocked)
Supply Load Load 0.125 dia.
(blocked) (open to (open)
exhaust) 0.187
0.312
dia. 0.406
#10-32 UNF-2A thd.
Valve Closed Valve Open
Note: Supplied with threaded bulkhead mount and integral rubber nozzle for direct actuation by Part No. Description
mechanical closure. By removing rubber nozzle and inserting a #10-32 fitting and length of 2011-012 Rubber Nozzles
hose, 2011-1 can be converted to a remote sensing valve.
Exhaust Exhaust
Flat Bracket
(open) (blocked) Flat mounting bracket
Supply Supply
Load (open to Load available. See page 146.
(blocked)
(open to outlet) (open)
exhaust)
Part No. Description
2010-050 Flat Bracket
Valve Closed Valve Open
1.140
Bleed Orifice Diameter: 0.010”
normal actuated