Professional Documents
Culture Documents
1 All items shall be in strict compliance with this document and its attachments. This also includes all referenced
Any exception, clarification, or alternative to the requisition documents and referred codes and standards shall b
2
writing. The Exception, Clarification, Alternative list shall be kept updated by Vendor.
Vendor shall not make assumptions to replace information not furnished by Purchaser. Vendor is required to obt
3
Any and all claims arising from lack of knowledge of required information will be rejected by Purchaser.
It shall be responsibility of vendor to ensure that their sub vendors are issued with copies of all relevant specifica
4 with the requirements. No deviations are allowed without the written agreement of the Purchaser. Failure to notif
Purchaser as complete compliance.
For materials supplied from stock, Original MILL certificates shall be made available for verification. MIll Certifica
5
and SI units. Copy of the original mill certificate duly certified as "TRUE COPY" by dealer / stockist shall be prov
7 The vendor shall be responsible for providing all documentation in accordance with Purchase order specification
8 All material shall be new. Materials supplied shall be dry, clean and free from moisture, dirt and loose foreign ma
9 CHINA & Chinese raw materials used for manufacturing the final product shall not be acceptable.
Description
6 SIZE ( mm Ø ) 1.2
11 CERTIFICATION / CERTIFIED MATERIAL TEST REPORT shall be as per PARA 5 of SFA 5.1
16 COUNTRY OF ORIGIN RESTRICTION CHINA & CHINESE raw materials used for manufacturi
Required per Heat or LOT for the size supplied & the sa
17 CHEMICAL ANALYSIS
material test report. Weld Chemistry Carbon=0.18% Ma
Ultimate Tensile Strength = 790-965 Mpa;Yield Strength
18 MECHANICAL TESTING
the same shall be reported on the certified material test
with copies of all relevant specifications and to ensure that they comply
of the Purchaser. Failure to notify any deviations will be interpreted by the
lable for verification. MIll Certificates and data shall be in English Language
" by dealer / stockist shall be provided.
ll not be acceptable.
IELD 690H
EDITION
der
AK
f SPEC.SFA 5.01
5 of SFA 5.1
23 of SFA 5.1
25 of SFA 5.1
V-GL
w materials used for manufacturing the final product shall not be acceptable.
LOT for the size supplied & the same shall be reported on the certified
eld Chemistry Carbon=0.18% Max, S=0.01% Max.
gth = 790-965 Mpa;Yield Strength = 690Mpa Min;%Elongation =20%Min &
orted on the certified material test report.
-350 HV10
t all the chemical analysis, mechanical test results and other as applicable for
Where specific information is not given,the requirements of the AWS
order number
me & address of manufcturing location
ing & the quantity manufactured,
roduct, dimensions, weight, etc.
fication, classification
hemical composition
ed inspections, chemical analysis and mechanical tests
ementary and additional test requirements specified.