Professional Documents
Culture Documents
RUJUKAN
ASTM 2015. Standard Specification for Coal Fly Ash and Raw or Calcinated Natural
Pozzolan for Use in Concrete. West Conshohocken, PA, ASTM International.
C618-15.
Azeez, A. A., K. Y. Rhee, S. J. Park & D. Hui 2013. Epoxy clay nanocomposites –
processing, properties and applications: A review. Composites Part B:
Engineering 45(1): 308-320.
Bada, S. & S. Potgieter-Vermaak 2008. Evaluation and Treatment of Coal Fly Ash for
Adsorption Application. Leonardo Electronic Journal of Practices and
Technologies 7(12): 37-48.
Baspinar, M. S., E. Kahraman, G. Gorhan & I. Demir 2010. Production of fired
construction brick from high sulfate-containing fly ash with boric acid addition.
Waste Manag Res 28(1): 4-10.
Basu, M., M. Pande, P. B. S. Bhadoria & S. C. Mahapatra 2009. Potential fly-ash
utilization in agriculture: A global review. Progress in Natural Science 19(10):
1173-1186.
Batista, N. L., M. C. Rezende & E. C. Botelho 2018. Effect of crystallinity on CF/PPS
performance under weather exposure: Moisture, salt fog and UV radiation.
Polymer Degradation and Stability.
Bell, D. A., B. F. Towler & M. Fan. 2011. The Nature of Coal. Dlm. (pnyt.). Ed.
Coal Gasification and its Applications pp. 9. Elsevier.
Bell, D. A., B. F. Towler & M. Fan. 2011. Non-gasification Uses of Coal. Dlm.
(pnyt.). Ed. Coal Gasification and its Applications pp. 20. Elsevier.
Biricik, H. & N. Sarier 2014. Comparative study of the characteristics of nano silica - ,
silica fume - and fly ash - incorporated cement mortars. Materials Research 17:
570-582.
Brostow, W., S. H. Goodman & J. Wahrmund. 2014. Epoxies. Dlm. (pnyt.). Ed.
Handbook of Thermoset Plastics (Third Edition) pp. 191-252. Boston:
William Andrew Publishing.
Cardinal, S., J. M. Pelletier, M. Eisenbart & U. E. Klotz 2016. Influence of
crystallinity on thermo-process ability and mechanical properties in a Au-
based bulk metallic glass. Materials Science and Engineering: A 660: 158-165.
Chaichanawong, J., C. Thongchuea & S. Areerat 2016. Effect of moisture on the
mechanical properties of glass fiber reinforced polyamide composites.
Advanced Powder Technology 27(3): 898-902.
Chaowasakoo, T. & N. Sombatsompop 2007. Mechanical and morphological
properties of fly ash/epoxy composites using conventional thermal and
microwave curing methods. Composites Science and Technology 67(11):
2282-2291.
Chen, R., Y. Li, R. Xiang & S. Li 2016. Effect of particle size of fly ash on the
properties of lightweight insulation materials. Construction and Building
Materials 123: 120-126.
Cheng, Y., M. Xia, F. Luo, N. Li, C. Guo & C. Wei 2016. Effect of surface
modification on physical properties of silica aerogels derived from fly ash acid
sludge. Colloids and Surfaces A: Physicochemical and Engineering Aspects
490(Supplement C): 200-206.
Ciullo, P. A. 1996. Adhesives and Sealants. Dlm. P. A. Ciullo (pnyt.). Ed. Industrial
Minerals and Their Uses - A Handbook and Formulary pp. 318-319. William
Andrew Publishing/Noyes.
110
Ciullo, P. A. 1996. Paints and Coatings. Dlm. P. A. Ciullo (pnyt.). Ed. Industrial
Minerals and Their Uses - A Handbook and Formulary pp. 121-123. William
Andrew Publishing/Noyes.
Colombo, A., M. Geiker, H. Justnes, R. A. Lauten & K. De Weerdt 2018. The effect
of calcium lignosulfonate on ettringite formation in cement paste. Cement and
Concrete Research 107: 188-205.
Cravo, J. C. M., D. de Lucca Sartori, G. Mármol, G. M. Schmidt, J. C. de Carvalho
Balieiro & J. Fiorelli 2017. Effect of density and resin on the mechanical,
physical and thermal performance of particleboards based on cement
packaging. Construction and Building Materials 151: 414-421.
Czub, P. 2009. Synthesis of high-molecular-weight epoxy resins from modified
natural oils and Bisphenol A or BisphenolA-based epoxy resins. Polymers for
Advanced Technologies 20(3): 194-208.
Danner, T., H. Justnes, M. Geiker & R. A. Lauten 2016. Early hydration of C3A–
gypsum pastes with Ca- and Na-lignosulfonate. Cement and Concrete
Research 79: 333-343.
Dayananda, N. & B. S. Keerthi Gowda 2017. Prediction of properties of fly ash and
cement mixed GBFS compressed bricks. Materials Today: Proceedings 4(8):
7573-7578.
Dhakal, H. N., Z. Y. Zhang & M. O. W. Richardson 2007. Effect of water absorption
on the mechanical properties of hemp fibre reinforced unsaturated polyester
composites. Composites Science and Technology 67(7): 1674-1683.
El-Kady, O. & A. Fathy 2014. Effect of SiC particle size on the physical and
mechanical properties of extruded Al matrix nanocomposites. Materials &
Design (1980-2015) 54: 348-353.
Ellis, B. 1993. Introduction to the chemistry, synthesis, manufacture and
characterization of epoxy resins. Dlm. B. Ellis (pnyt.). Ed. Chemistry and
Technology of Epoxy Resins pp. 1-36. Dordrecht: Springer Netherlands.
Ennouri, H., B. Miladi, S. Z. Diaz, L. A. F. Güelfo, R. Solera, M. Hamdi & H.
Bouallagui 2016. Effect of thermal pretreatment on the biogas production and
microbial communities balance during anaerobic digestion of urban and
industrial waste activated sludge. Bioresource Technology 214(Supplement C):
184-191.
Fan, F., Z. Liu, G. Xu, H. Peng & C. S. Cai 2018. Mechanical and thermal properties
of fly ash based geopolymers. Construction and Building Materials 160: 66-81.
Fan, M., J. Liu, X. Li, J. Cheng & J. Zhang 2013. Curing behaviors and properties of
an extrinsic toughened epoxy/anhydride system and an intrinsic toughened
epoxy/anhydride system. Thermochimica Acta 554(Supplement C): 39-47.
Fan, X. J., S. W. R. Lee & Q. Han 2009. Experimental investigations and model study
of moisture behaviors in polymeric materials. Microelectronics Reliability
49(8): 861-871.
Ferdosian, F., M. Ebrahimi & A. Jannesari 2013. Curing kinetics of solid
epoxy/DDM/nanoclay: Isoconversional models versus fitting model.
Thermochimica Acta 568(Supplement C): 67-73.
Fink, J. K. 2013. Epoxy Resins. Dlm. (pnyt.). Ed. Reactive Polymers Fundamentals
and Applications (Second Edition) pp. 95-153. Oxford: William Andrew
Publishing.
Foix, D., M. T. Rodríguez, F. Ferrando, X. Ramis & A. Serra 2012. Combined use of
sepiolite and a hyperbranched polyester in the modification of
111
Yaumi, A. L., I. A. Hussien & R. A. Shawabkeh 2013. Surface modification of oil fly
ash and its application in selective capturing of carbon dioxide. Applied
Surface Science 266(Supplement C): 118-125.
Yoo, M. J., S. H. Kim, S. D. Park, W. S. Lee, J.-W. Sun, J.-H. Choi & S. Nahm 2010.
Investigation of curing kinetics of various cycloaliphatic epoxy resins using
dynamic thermal analysis. European Polymer Journal 46(5): 1158-1162.
Yoon, S., S. Kang, Y. Choi, H. Choi & S.-J. Lee 2016. Effect of relative density on
microstructure and mechanical properties of Fe-12Mn-0.2C alloy fabricated by
powder metallurgy. Powder Technology 298: 106-111.
Youcai, Z. 2017. Engineering Design for Fly Ash Solidification and Stabilization.
Dlm. (pnyt.). Ed. Pollution Control and Resource Recovery: Municipal Solid
Wastes Incineration pp. 287-331. Butterworth-Heinemann.
Youcai, Z. 2017. Utilization of Fly Ash in Ceramic Brickmaking. Dlm. (pnyt.). Ed.
Pollution Control and Resource Recovery: Municipal Solid Wastes
Incineration pp. 213-255. Butterworth-Heinemann.
Yu, J., X. Li, D. Fleming, Z. Meng, D. Wang & A. Tahmasebi 2012. Analysis on
Characteristics of Fly Ash from Coal Fired Power Stations. Energy Procedia
17(Part A): 3-9.
Zhang, S., Y.-R. Lee, J.-W. Ahn & W.-S. Ahn 2018. Sodium silicate insulating foam
reinforced with acid-treated fly ash. Materials Letters 218: 56-59.
Zhang, Y., Z. Zhang, Z. Liu, P. Norris & W.-p. Pan 2017. Study on the mercury
captured by mechanochemical and bromide surface modification of coal fly
ash. Fuel 200(Supplement C): 427-434.
Zhang, Z., B. Wang & Q. Sun 2014. Fly Ash-derived Solid Amine Sorbents for CO2
Capture from Flue Gas. Energy Procedia 63(Supplement C): 2367-2373.
Zheng, Y. J., A. D. Jensen, C. Windelin & F. Jensen 2012. Review of technologies for
mercury removal from flue gas from cement production processes. Progress in
Energy and Combustion Science 38(5): 599-629.
Zhou, X., M. Zhou, X. Wu, Y. Han, J. Geng, T. Wang, S. Wan & H. Hou 2017.
Reductive solidification/stabilization of chromate in municipal solid waste
incineration fly ash by ascorbic acid and blast furnace slag. Chemosphere 182:
76-84.
Zhuang, X. Y., L. Chen, S. Komarneni, C. H. Zhou, D. S. Tong, H. M. Yang, W. H.
Yu & H. Wang 2016. Fly ash-based geopolymer: clean production, properties
and applications. Journal of Cleaner Production 125(Supplement C): 253-267.
Ziolkowski, M. & M. Kovtun 2017. Confined-Direct Electric Curing of NaOH-
activated fly ash based brick mixtures under free drainage conditions: Part 1.
Factorial experimental design. Construction and Building Materials
155(Supplement C): 1050-1062