Professional Documents
Culture Documents
1-05
CAMPBELL® CHAIN
Block Size
Inch Inch Inch Inch Inch Inch
3 4 5 6 8 10
Fittings
Cat. Cat. Cat. Cat. Cat. Cat.
Type No. No. No. No. No. No.
Round Loose Hook “AF”
Single 7205336 7205436 7205536 7205636 7205836 -
Double 7206836 7206936 7207036 7207136 7207336 -
Triple 7208436 7208536 7208636 7208736 7208936 -
Loose, Swivel Hook with Latch “G”
Single - 7205434 7205534 7205634 - -
Double - 7206934 7207034 7207134 7207334 -
Triple - 7208534 7208634 7208734 - -
Screw Pin Anchor Shackle “K”
Single 7205335 7205435 7205535 7205635 7205835 7206035
Double 7206835 7206935 7207035 7207135 7207335 7207535 DO NOT EXCEED THE
Triple 7208435 7208535 7208635 7208735 7208935 - WORKING LOAD LIMIT.
2-05
CAMPBELL® CHAIN
DROP LINK, MANILA ROPE SNATCH BLOCKS
• Shells from wood or steel
• Cross-bolted shell
• Fittings drop forged; metal parts galvanized
• Available with bronze self-lubricating bushing
• Drop link snatch blocks are primarily used as Stiff Swivel Hook
lead blocks; not recommended for hoisting with Latch,
Fitting “V”
3-05
CAMPBELL® CHAIN
STEEL BLOCKS FOR MANILA OR FIBER ROPE
• Steel shells
• Available with bronze self-lubricating bushings
• Galvanized finish
Flatted, Loose Screw Pin
Swivel Hook Anchor Shackle,
Single Double with Latch, Fitting “K”
3041 AF 3042 AF Fitting “G” Block Size (in.) 3 4 5 6 8
3 1 5 3
Rope Diameter ⁄8 ⁄2 ⁄8 ⁄4 1
Block Size (in.) 3 4 5 6 8 Sheave Size
3 1 1 3
Fittings Cat. Cat. Cat. Cat. Cat. O.D. 1 ⁄4 2 ⁄4 3 3 ⁄2 4 ⁄4
Type No. No. No. No. No. 1 5 3 3
Round LooseHook “AF”
Rim Thickness ⁄2 ⁄8 ⁄4 1 1 ⁄8
3 3 3 1 5
Bronze SL Single 7245335 7245435 7245535 7245635 7245835 Center Pin Dia. ⁄8 ⁄8 ⁄8 ⁄2 ⁄8
Bushed, Double 7246835 7246935 7247035 7247135 7247335 Weight lb lb lb lb lb
Galvanized Triple *7248435 7248535 - *7248735 7248935 1 1
Single 1 ⁄2 2 ⁄2 4 6 11
Flatted, Loose, Swivel Hook with latch “G”
1 1 1
Bronze SL Single 7245334 7245434 7245534 - - Double 2 3 ⁄2 6 9 ⁄2 16 ⁄ 2
Bushed, Double - 7246934 - 7247134 - 1 1
Triple 2 ⁄2 4 ⁄2 8 12 23
Galvanized Double - 7248534 - - -
Working Load Limit lb kg lb kg lb kg lb kg lb kg
Screw Pin Anchor Shackle “K”
Single 700 318 1100 499 1300 590 2000 907 3300 1497
Bronze SL Single 7245336 7245436 7245536 7245636 7245836
Bushed, Double - 7246934 - 7247134 - Double 1000 454 1600 726 2200 998 3300 1497 5100 2313
Galvanized Double - 7248534 - - - Triple 1400 635 2200 1089 3200 1452 4000 1814 7000 3175
* Note: These items are made to order Working Loads are Resultant Working Loads.
4-05
SKOOKUM
WIDE SHEAVE – WIDE THROAT BLOCKS
3 Ton to 26 Ton Capacity
Manganese Long-Life Sheaves
SPECIFICATIONS
Block Sheave Sheave Pin Line Type Weight Safe Working
Number Size (in.) Size (in.) Size (in.) Bearing (lbs.) Load* (lbs.)
110-A 4 x 1-3/8 1-1/4 3/8 Bronze 12 10,000
110-AR 4 x 1-3/8 1-1/4 3/8 Roller 12 10,000
R-4 4 x 1-3/8 1-1/4 3/8 Roller 12 10,000
R-6 6x3 1-3/8 3/8 - 1/2 Timken 30 16,000
R-8 8x3 1-3/8 1/2 - 5/8 Timken 43 16,000
R-10 10 x 4 1-3/8 1/2 - 5/8 Timken 50 18,000
508 8x4 2 1 – 1-1/8 Tinken 72 30,000
80 80 8x4 2 1-1/8 – 1-1/4 Timken 80 32,000 TM-10
TM-10 10 x 5 2-1/2 1-1-1/4 Timken 110 50,000
*Ultimate strength is 5 times safe working load.
5-05
SKOOKUM
HEAVY DUTY BLOCKS: 21.5 Ton to 29 Ton Capacity
SPECIFICATIONS
Block Sheave Sheave Pin Line Weight Safe Working
Number Size (in.) Size (in.) Size (in.) (lbs.) Load* (lbs.)
2210A 10 x 2-1/2 2 7/8 - 1 83 43,000
2210A, 2212
2214 2212 12 x 2-1/2 2 1-1/8 – 1-1/4 111 44,000
21 12 x 2-1/2 2 1-1/2 117 44,000
Bearing
Timkin
2218A
DIMENSIONS
Block A B C D E F G H J K
Number (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.) (in.)
2210A 18 7 2 2-3/4 2-3/4 4-1/4 2-1/4 2 1-3/4 11
2212 22 7-1/2 2 2-3/4 3 4-1/2 2-1/2 2 1-3/4 13
21 22 7 2 2-3/4 3 4-1/2 2-1/2 2 1-3/4 13
2214 25 7-1/2 2 2-3/4 3 4-3/4 2-1/2 2 1-3/4 15
2216B 26-1/2 8 2-1/8 3 3 4 2-1/4 2 1-3/4 16-5/8
2218A 31 9 2-1/4 3-1/2 4 5-1/4 4 2-3/8 2-1/8 19
2216B, 2220 2220 29-3/4 8 2-1/8 3 2-1/2 5-1/8 2-3/4 2 1-3/4 20-3/4
2222 2222 33-3/8 8 2-1/8 3-1/8 3-3/8 5-1/4 4-1/4 2-3/8 2-1/8 23
6-05
SKOOKUM
MULTI-PURPOSE BLOCKS
7 Ton to 17.5 Ton Capacity
412 414T, 416T
Yoke Full Side Block
Attachment
SPECIFICATIONS
Block Sheave Sheave Pin Line Weight Safe Working
Number Size (in.) Size (in.) Size (in.) (lbs.) Load✲ (lbs.)
T-6S 6 x 1-1/4 1-5/16 3/8 22 14,000
T-8 8 x 1-3/8 1-5/16 1/2 - 5/8 32 16,000
T-10S 10 x 1-3/4 1-5/16 5/8 - 3/4 44 16,000
T-12A 12 x 2 1-13/16 3/4 - 7/8 69 32,000
T-14 14 x 2 1-13/16 3/4 -7/8 79 32,000
410-A 10 x 2 1-1/2 3/4 48 25,000
Bearing
Timken
7-05
SKOOKUM
HALF SIDE BLOCKS
5 Ton to 13.5 Ton Capacity
SPECIFICATIONS
DIMENSIONS (INCHES)
Sheave
A B C D E G H J K
Size
A-4 & A-4R 7-3/4 3-1/2 1-1/8 1-1/2 1-1/4 3-1/2 7/8 7/8 4-1/2
A-6 & A-6R 10-1/2 4 7/8 1-1/2 1-1/2 4-1/2 1 1 6-1/2
A-8 & A-8R 14-1/2 4 1 1-1/2 1-3/4 6 1-1/4 1-1/4 9
A-10 & A-10R 16-1/2 4 1 1-1/2 1-3/4 6-1/2 1-1/4 1-1/4 11
A-12 & A-12R 19-3/4 6-1/4 1 1-3/4 2-1/4 6-1/2 1-1/2 1-1/2 12-1/2
P. O. Box 280
Hubbard, OR 97032
Tel: (503) 651-3175
An Ulven Company (800) 547-8211
Manufacturer of Skookum Blocks, Skookum Alloy Shackles, Fax: (503) 651-3409
and Custom-Designed Marine Products E-mail: skookum@ulvencompanies.com
Also available: Balanced Head Fairleads, Vertical & Horizontal Deck Lead Sheaves Web: www.skookumco.com
coopertools0008 5/9/05 10:40 AM Page 0008
8-05
CAMPBELL® CHAIN
Cat. Sheave Size Rope Dia. Weight Cat. Working Load Limit Weight
No. in. mm in. mm lb kg No. ton kg lb kg
3 5 3
7381101 3 x ⁄4 x 3⁄8 76 x 19 x 10 ⁄8 16 3 ⁄4 2 7399079 15 13608 77 35
9-05
CAMPBELL® CHAIN
DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn.
10-05
CAMPBELL® CHAIN
DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn.
11-05
CAMPBELL® CHAIN
DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn.
12-05
CAMPBELL® CHAIN
CHAIN SHACKLES
422, Screw Pin Drop-Forged Carbon Steel
• Standard Material: All shackle bodies are drop-forged
carbon steel. All pins are alloy steel
• Standard Finish: Galvanized to ASTM A-153 specification
• Working load limit permanently shown on every shackle
• Design Factor: 6 to 1
• Other Features: Meets Federal Specification TR-C-271
Type VII, Class 2
• 422-G Screw Pin meets the design requirements of Federal
Specification RR-C-271, Type IVB, Grade A, Class 2
DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn.
13-05
CAMPBELL® CHAIN
DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn.
LOAD BINDERS
Working Load
6203603, Cat. For Chain Size & Type Take-Up Lb Limit
6203205, No. in. mm System Description Packaging in. mm Each lb kg
6203604, 6203605 6203205
1
⁄4 7 Sys. 3 & 4 Doub. Swivel 4/ctn. 2
3
⁄4 70 3 2600 1179
Lever Type
Lever, Red, Imported
5 1 1
6203603 ⁄16 8 Sys. 7 Doub. Swivel 4/ctn. 4 ⁄2 114 8 ⁄2 5400 2450
3
⁄8 10 Sys. 4 Lever, Red, Domestic
6207504, 5 1 1
6207805,
6203604 ⁄16 8 Sys. 7 Doub. Swivel 4/ctn. 4 ⁄2 114 8 ⁄2 5400 2450
3
6207803
⁄8 10 Sys. 4 Lever, Red, Imported
3 1 1
Ratchet Type 6203605 ⁄8 10 Sys. 7 Lever Load Binder, Bulk 4 ⁄2 114 8 ⁄2 9200 4170
1
⁄2 13 Sys. 4 Domestic
5 1
DO NOT EXCEED the working 6207504 ⁄16 8 Sys. 7 Ratchet, Red Bulk 8 203 9 ⁄2 5400 2450
3
load limits for chain or components. ⁄8 10 Sys. 4 Imported
3
DO NOT use for overhead lifting or 6207803 ⁄8 10 Sys. 7 Ratchet, Bulk 8 203 10 9200 4170
1
hoisting. DO NOT USE if the chain ⁄2 13 Sys. 4 Imported
3
or components are visibly distorted 6207805 ⁄8 10 Sys. 7 Ratchet, Red Bulk 8 203 10 9200 4170
1
or worn. ⁄2 13 Sys. 4 Domestic
14-05
CAMPBELL® CHAIN
Dimensions
Working (Dia.) (Take Up) (Length) Weight/
Cat. Load Limit A B W E G H J 100 lb
No. lb kg in. mm in. mm in. mm in. mm in. mm in. mm in. mm lb kg
5 1 7 15 9 15
6250302 800 363 ⁄16 8 4 ⁄2 114 9 ⁄16 240 2 51 ⁄32 12 ⁄32 7 ⁄16 24 45 20
3 13 11 9 11 1
6250303 1200 544 ⁄8 10 6 152 11 ⁄16 300 2 ⁄32 60 ⁄16 14 ⁄32 9 1 ⁄8 29 84 38
1 7 31 3 7 7
6250305 2200 998 ⁄2 13 6 152 13 ⁄16 341 2 ⁄32 75 ⁄4 19 ⁄16 11 1 ⁄16 37 156 71
1 7 31 3 7 7
6250306 2200 998 ⁄2 13 9 229 16 ⁄16 418 2 ⁄32 75 ⁄4 19 ⁄16 11 1 ⁄16 37 198 90
1 7 31 3 7 7
6250307 2200 998 ⁄2 13 12 305 19 ⁄16 494 2 ⁄32 75 ⁄4 19 ⁄16 11 1 ⁄16 37 246 112
5 7 1 29 1 3
6250309 3500 1588 ⁄8 16 6 152 14 ⁄8 378 3 ⁄2 89 ⁄32 23 ⁄2 13 1 ⁄4 44 256 116
5 7 1 29 1 3
6250310 3500 1588 ⁄8 16 9 229 17 ⁄8 454 3 ⁄2 89 ⁄32 23 ⁄2 13 1 ⁄4 44 310 141
5 7 1 29 1 3
6250311 3500 1588 ⁄8 16 12 305 20 ⁄8 530 3 ⁄2 89 ⁄32 23 ⁄2 13 1 ⁄4 44 350 159
3 3 1 1 5 1
6250313 5200 2359 ⁄4 19 6 152 16 ⁄4 425 4 ⁄4 108 1 ⁄32 26 ⁄8 16 2 ⁄8 54 380 173
3 3 1 1 5 1
6250314 5200 2359 ⁄4 19 9 229 19 ⁄4 502 4 ⁄4 108 1 ⁄32 26 ⁄8 16 2 ⁄8 54 458 208
3 3 1 1 5 1
6250315 5200 2359 ⁄4 19 12 305 22 ⁄4 578 4 ⁄4 108 1 ⁄32 26 ⁄8 16 2 ⁄8 54 574 261
3 3 1 1 5 1
6250316 5200 2359 ⁄4 19 18 457 28 ⁄4 730 4 ⁄4 108 1 ⁄32 26 ⁄8 16 2 ⁄8 54 700 318
7 1 3 9 3 3
6250319 7200 3266 ⁄8 22 12 305 24 ⁄8 613 4 ⁄4 121 1 ⁄32 33 ⁄4 19 2 ⁄8 60 791 359
7 1 3 9 3 3
6250320 7200 3266 ⁄8 22 18 457 30 ⁄8 765 4 ⁄4 121 1 ⁄32 33 ⁄4 19 2 ⁄8 60 1050 477
1 3 15 7
6250322 10000 4536 1 25 12 305 26 ⁄2 673 5 ⁄4 146 1 ⁄32 37 ⁄8 22 3 76 1170 531
1 3 15 7
6250323 10000 4536 1 25 18 457 32 ⁄2 826 5 ⁄4 146 1 ⁄32 37 ⁄8 22 3 76 1400 636
1 3 15 7
6250324 10000 4536 1 25 24 610 38 ⁄2 978 5 ⁄4 146 1 ⁄32 37 ⁄8 22 3 76 1600 726
1 3 27 1 9
6250327 15200 6895 1 ⁄4 32 12 305 29 ⁄8 746 7 178 1 ⁄32 47 1 ⁄8 29 3 ⁄16 90 2100 953
1 3 27 1 9
6250328 15200 6895 1 ⁄4 32 18 457 35 ⁄8 899 7 178 1 ⁄32 47 1 ⁄8 29 3 ⁄16 90 2500 1135
1 3 27 1 9
6250329 15200 6895 1 ⁄4 32 24 610 41 ⁄8 1051 7 178 1 ⁄32 47 1 ⁄8 29 3 ⁄16 90 2800 1271
1 3 1 1 1
6250332 21400 9707 1 ⁄2 38 12 305 33 ⁄4 857 9 229 2 ⁄8 54 1 ⁄4 32 4 ⁄8 105 2925 1328
1 3 1 1 1
6250334 21400 9707 1 ⁄2 38 24 610 45 ⁄4 1162 9 229 2 ⁄8 54 1 ⁄4 32 4 ⁄2 114 3800 1725
DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn.
15-05
CAMPBELL® CHAIN
Jaw & Jaw/Jaw & Eye Jaw & Jaw Jaw & Eye
Working (A) Dimensions Weight/ Dimensions Weight/
Load Limit Thread Dia. Cat. Take Up (B) Length (W) 100 Cat. Take Up (B) Length (W) 100
lb kg in. mm No. in. mm in. mm lb kg No. in. mm in. mm lb kg
1 15 7
500 227 ⁄4 6 6250501 4 102 7 ⁄16 202 35 16 6250401 4 102 7 ⁄8 200 33 15
5 5 1 3
800 363 ⁄16 8 6250502 1
4 /2 114 9 ⁄16 237 51 23 6250402 4 ⁄2 114 9 ⁄8 238 48 22
3 3 9
1200 544 ⁄8 10 6250503 6 152 11 ⁄16 284 94 43 6250403 6 152 11 ⁄16 294 90 41
1 3 1
2200 998 ⁄2 13 6250505 6 152 12 ⁄4 324 170 77 6250405 6 152 13 ⁄8 333 164 74
1 3 1
2200 998 ⁄2 13 6250506 9 229 15 ⁄4 400 215 98 6250406 9 229 16 ⁄8 410 208 94
1 3 1
2200 998 ⁄2 13 6250507 12 305 18 ⁄4 476 265 120 6250407 12 305 19 ⁄8 486 257 117
5 7
3500 1588 ⁄8 16 – – – – – – – 6250409 6 152 14 ⁄8 378 265 120
5 3 13
3500 1588 ⁄8 16 6250510 9 229 17 ⁄4 451 349 158 6250410 9 229 17 ⁄16 452 330 150
5 3 13
3500 1588 ⁄8 16 6250511 12 305 20 ⁄4 527 400 182 6250411 12 305 20 ⁄16 529 380 173
5 3
3500 1588 ⁄8 16 6250512 18 457 26 ⁄4 679 450 204 – – – – – – –
1
5200 2359
3
⁄4 19 6250513 6 152
3
15 ⁄4 400 443 201 6250414 9 229 19 ⁄4 489 488 222
3 3
5200 2359 ⁄4 19 6250514 9 229 18 ⁄4 476 518 235 – – – – – – –
3 3
5200 2359 ⁄4 19 6250515 12 305 21 ⁄4 552 633 287 – – – – – – –
3 3
5200 2359 ⁄4 19 6250516 18 457 27 ⁄4 705 760 345 6250419 12 305 23
3
⁄4 603 814 370
3 3
5200 2359 ⁄4 19 – – – – – – – 6250420 18 457 29 ⁄4 756 1142 518
7 3
7200 3266 ⁄8 22 6250519 12 305 23 ⁄8 594 837 380 6250421 6 152 20 508 912 414
7 3
7200 3266 ⁄8 22 6250520 18 457 29 ⁄8 746 1208 548 6250422 12 305 26 660 1206 548
7
10000 4536 1 25 6250521 6 152 19 ⁄16 494 947 430 6250423 18 457 32 813 1484 674
7
10000 4536 1 25 6250522 12 305 25 ⁄16 646 1290 586 – – – – – – –
7 9
10000 4536 1 25 6250523 18 457 31 ⁄16 799 1560 708 6250427 12 305 28 ⁄16 725 1980 899
7 9
10000 4536 1 25 6250524 24 610 37 ⁄16 951 1785 810 6250428 18 457 34 ⁄16 878 2400 1,090
1 1 7
15200 6895 1 ⁄4 32 6250527 12 305 27 ⁄2 699 2140 972 6250432 12 305 30 ⁄8 784 3050 1,385
1 1
15200 6895 1 ⁄4 32 6250528 18 457 33 ⁄2 851 2560 1162 – – – – – – –
1 1
15200 6895 1 ⁄4 32 6250529 24 610 39 ⁄2 1003 3100 1407 – – – – – – –
1 1
21400 9707 1 ⁄2 38 6250532 12 305 31 ⁄4 794 3200 1453 – – – – – – –
1 1
21400 9707 1 ⁄2 38 6250533 18 457 37 ⁄4 946 3700 1680 – – – – – – –
1 1
21400 9707 1 ⁄2 38 6250534 24 610 43 ⁄4 1099 4100 1861 – – – – – – –
DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn.
16-05
CAMPBELL® CHAIN
1015, EYE HOIST HOOKS — LATCHED
• Standard Material: Drop-forged carbon steel or alloy and heat treated
• Standard Finish: Self-colored or galvanized to ASTM A-153
specification
• Design Factor: 5 to 1 for carbon steel; 4 to 1 for alloy steel
• Other Features: All hooks are drilled for latch kits
17-05
CAMPBELL® CHAIN
CLEVIS GRAB HOOKS 473, 473-A
• Standard Material: Drop-forged carbon steel steel (system 3 & 4)
or alloy steel
• Standard Finish: System 3 & 4 hooks available with blu-krome
or self-colored finish. Alloy hooks are heat treated, and painted
orange and stamped “Alloy”
• S/C finish hooks are bulk packed, blu-krome hooks are
available packed 10 per box or individually bagged and
sold in shelf packs of 10
• Order unit is “Each”
473-A, Alloy Steel –
473, Carbon Steel, System 3 & 4 Heat Treated
Self-colored Blu-Krome Blu-Krome Working Working
Chain (Bulk) (10/Box) (Bagged) Load Load
Size Cat. Cat. Cat. Limit Dimensions (in.) Weight Cat. Limit Weight
(in.) No. No. No. lb kg B E P R Each (lbs.) No. lb kg Each (lbs.)
1 3 11 5
⁄4 4500405 4500424 B5950424 2600 1179 ⁄8 ⁄ 32 ⁄ 16 123⁄ 32 0.32 4503315 4100 1860 0.32
5 15 7 3
⁄ 16 4500505 4500524 B5950524 3900 1769 ⁄ 32 ⁄ 16 ⁄8 1 31⁄ 32 0.59 4503415 5100 2313 0.59
3 17 1 7 1
⁄8 4500605 4500624 B5950624 5400 2449 ⁄ 32 ⁄2 ⁄ 16 2 ⁄4 0.92 4503515 7100 3221 0.92
7 19 19 1 5
⁄ 16 4500705 -- -- 7200 3266 ⁄ 32 ⁄ 32 ⁄2 2 ⁄8 1.32 4503615 10000 4536 1.32
1 21 21 9
⁄2 4500805 4500824 -- 9200 4173 ⁄ 32 ⁄ 32 ⁄ 16 3 1⁄ 64 2.00 4503715 12000 5443 2.00
5 13 25 3
⁄8 4501005 -- -- 11500 5216 ⁄ 16 ⁄ 32 ⁄4 3 25⁄ 32 3.90 4503815 18100 8210 3.90
3 15 15 13
⁄4 4501205 -- -- 16200 7348 ⁄ 16 ⁄ 16 ⁄ 16 4 25⁄ 32 6.12 4503915 28300 12837 6.12
18-05
CAMPBELL® CHAIN
CLEVIS SLIP HOOKS 476, 476-A
• Drop-forged carbon steel steel (system 3 & 4) or alloy steel
• Standard Finish: System 3 & 4 hooks available with blu-krome or self-colored
finish. Alloy hooks are heat treated, and painted orange and stamped “AH”
• S/C finish hooks are bulk packed, blu-krome hooks are available packed
10 per box or individually bagged and sold in shelf packs of 10**
• Design Factor: Carbon steel hooks is 4 to 1. Alloy steel hooks is 31⁄ 2 to 1
19-05
CAMPBELL® CHAIN
OVERHEAD LIFTING HOOK 436-G, 444G NUT EYEBOLTS, GALVANIZED
• Standard Material: Drop-forged carbon steel
• Working load limits apply only to eyebolts in lifting or pulling
applications
• Galvanizing to ASTM A-153 specification
Note: If angular loading is necessary, eyebolts are to be used at reduced loads
Regular Working
Shank Dimensions Cat. Load Limit Dimensions (in.) Weight/
Dia. (in.) Length (in.) No. lb kg A B T 100 (lbs.)
• Made to Grade 100 specifications – 1
⁄4 2 7150101 550 249
1
⁄2 1 1
1
⁄2 8 ⁄8
7
9⁄ 32" rated at 5700 lbs.
1 1 1 1
• Available in both Eye and QA styles from ⁄4 4 7150102 550 249 ⁄2 1 2 ⁄2 11 ⁄2
9⁄ 32" – 5 ⁄ 8" 5 1 5 1 1 5
⁄ 16 2 ⁄4 7150103 850 386 ⁄8 1 ⁄4 2 ⁄2 15 ⁄ 8
• Made from heat treated 4130 alloy steel 3 1 3 1 1 1
⁄8 2 ⁄2 7150105 1250 567 ⁄4 1 ⁄2 1 ⁄2 23 ⁄ 2
• Fatigue tested to ASTM A952 3 1 3 1 1 1
• 100% proof tested with Certificate of Test
⁄8 4 ⁄2 7150106 1250 567 ⁄4 1 ⁄2 2 ⁄2 27 ⁄ 2
3 3 1
included ⁄8 6 7150107 1250 567 ⁄4 1 ⁄2 3 32
1 1 1
• Latch closes automatically, will not open ⁄2 3 ⁄4 7150108 2250 1021 1 2 1 ⁄2 54
under load 1 3
⁄2 6 7150109 2250 1021 1 2 3 68 ⁄4
• Eye style designed to accommodate heavy 1
duty thimble ⁄2 8 7150110 2250 1021 1 2 3 78
1
• Designed and manufactured in the USA ⁄2 10 7150111 2250 1021 1 2 3 88
1
⁄2 12 7150112 2250 1021 1 2 4 100
5 1 1
⁄8 4 7150113 3600 1633 1 ⁄4 2 ⁄2 2 104
5 1 1
⁄8 6 7150114 3600 1633 1 ⁄4 2 ⁄2 3 120
5 1 1
CAM-LOK EYE TYPE HOOK ⁄8 8 7150115 3600 1633 1 ⁄4 2 ⁄2 3 131
5 1 1
Working Eye Hole Hook ⁄8 10 7150116 3600 1633 1 ⁄4 2 ⁄2 3 152
Part Hook Size Load Limit Diameter Reach Opening 5 1 1
No. (in.) (lbs.) (in.) (in.) (in.) ⁄8 12 7150117 3600 1633 1 ⁄4 2 ⁄2 4 168
3 1 1
5648495 9
⁄ 32 5700 1.00 5.50 1.50 ⁄4 4 ⁄2 7150118 5200 2359 1 ⁄2 3 2 165
3 1
5648695 3
⁄8 8800 1.38 6.56 2.25 ⁄4 6 7150119 5200 2359 1 ⁄2 3 3 190
3 1
5648895 1
⁄2 15000 1.66 8.25 2.25 ⁄4 8 7150120 5200 2359 1 ⁄2 3 3 208
3 1
5649095
5
⁄8 22600 2.00 10.00 2.50 ⁄4 10 7150121 5200 2359 1 ⁄2 3 3 230
3 1
⁄4 12 7150122 5200 2359 1 ⁄2 3 4 255
3 1
⁄4 15 7150123 5200 2359 1 ⁄2 3 5 290
7 3 1 1
⁄8 5 -- 7200 3266 1 ⁄4 3 ⁄2 2 ⁄2 252
7 3 1
⁄8 8 -- 7200 3266 1 ⁄4 3 ⁄2 4 290
CAM-LOK CLEVIS TYPE HOOK 7 3 1
⁄8 12 -- 7200 3266 1 ⁄4 3 ⁄2 4 340
Working Hook 7 3 1
⁄8 18 -- 7200 3266 1 ⁄4 3 ⁄2 7 440
Part Hook Size Load Limit Reach Opening
No. (in.) (lbs.) (in.) (in.) 1 6 7150128 10000 4536 2 4 3 390
9 1 9 7150129 10000 4536 2 4 4 470
5748495 ⁄ 32 5700 4.69 1.50
3 1 12 7150130 10000 4536 2 4 4 520
5748695 ⁄8 8800 5.56 2.25
1 1 18 7150131 10000 4536 2 4 7 650
5748895 ⁄2 15000 6.88 2.25
1 1
5749095
5
⁄8 22600 8.25 2.50 1 ⁄4 8 -- 15000 6805 2 ⁄2 5 4 750
1 1
1 ⁄4 12 -- 15000 6805 2 ⁄2 5 4 900
* These items are made to order.
20-05
CAMPBELL® CHAIN
752-S, 752-G, 752-A CONNECTING LINKS, CARBON STEEL AND ALLOY STEEL
• Standard Material: Forged carbon and alloy steel - Heat Treated
• Standard Finish: Self-colored or galvanized
• Design Factor: 4 to 1
• For effective closure peen to fill eye of mating half as much as possible
• Meets design requirements of Federal Specification RR-C-271D, Type II
Alloy Steel –
Carbon Steel, Heat Treated Heat Treated
Self-colored Galvanized Working Load Links Weight Self-colored Working Load Links
Size Cat. Cat. Limit Dimensions (in.) Per Per Cat. Limit Per Weight/
(in.) No. No. lb kg A B C D Box 100 (lbs.) No. lb kg Box 100 (lbs.)
3 3
⁄ 16 5200304 5200334 800 363 ⁄4 11⁄ 8 5
⁄ 16 5
⁄8 20 3 -- -- -- 20 3
1 1 7 7
⁄4 5200404 5200434 1400 635 1 1 ⁄2 ⁄ 16 ⁄8 10 6 -- -- -- 10 6
5
⁄ 16 5200504 5200534 2000 907 1 3⁄ 16 1 3⁄ 4 1
⁄2 1 10 10 5208505 3000 1361 10 10
3
⁄8 5200604 5200634 2800 1270 1 3⁄ 8 2 1⁄ 8 9
⁄ 16 11⁄ 8 10 18 5208605 4200 1905 10 18
7 9 3 5
⁄ 16 5200704 5200734 3625 1644 1 ⁄ 16 2 ⁄8 ⁄8 11⁄ 4 10 26 5208705 5400 2449 10 26
1 23 11 21 7
⁄2 5200804 5200834 4750 2155 1 ⁄ 32 2 ⁄ 16 ⁄ 32 1 ⁄ 16 10 38 5208805 7000 3175 10 38
5
⁄8 5201004 5201034 7250 3289 2 1⁄ 8 3 3⁄ 8 13
⁄ 16 17⁄ 8 10 72 5209005 10800 4899 10 72
3
2 1⁄ 2 3 7⁄ 8 31 1
⁄4 5201204 5201234 10250 4649 ⁄ 32 2 ⁄8 5 112 5209205 15000 6804 5 112
7
⁄8 5201405 5201435 12000 5443 2 15⁄ 16 41⁄ 2 1 3⁄ 16 21⁄ 2 Bulk 174 5209405 18000 8165 Bulk 174
3 5⁄ 16 11⁄ 4 3
1 5201605 5201635 15500 7031 5 2 ⁄4 Bulk 240 5209605 24000 10866 Bulk 240
11⁄ 4 5202005 5202035 24000 10886 4 6 1⁄ 8 11⁄ 2 3 1⁄ 4 Bulk 464 -- -- -- Bulk 464
21-05
CAMPBELL® CHAIN
CAM-ALLOY OBLONG LINKS
Nominal Used with Type and Size of Sling
Approximate Working Diameter Inside Dimensions Single Double Triple or Quad
Link Cat. Wgt. Each Load Limit Material (in.) Width (in.) Length (in.) Type (in.) Type (in.) Type (in.)
No. No. lb lb kg A B C S&C D T or Q
13
11⁄ 2 7 7
CO-0 5685615 0.50 4200 1900 ⁄ 32 3 ⁄ 32 ⁄ 32 --
37 1 9 9 7
VO-1 5683215 1.90 8600 3900 ⁄ 64 2 ⁄2 5 ⁄ 32 ⁄ 32 ⁄ 32
13 3 3 9
VO-2 5683315 2.63 17600 8000 ⁄ 16 3 6 ⁄8 ⁄8 ⁄ 32
1 1 5 1 3
VO-3 5683415 6.78 30000 13600 1 ⁄8 4 8 ⁄ 2 or ⁄ 8 ⁄2 ⁄8
VO-4 5683515 9.20 45200 20500 11⁄ 4 4 8
3
⁄4 5
⁄8
1
⁄2
VO-5 5683615 18.90 70600 32100 1 5⁄ 8 5 1
⁄4 10 1
⁄2
7
⁄8 3
⁄4 5
⁄8
VO-6 5683715 28.71 105900 48100 1 7⁄ 8 6 12 1
7
⁄8 3
⁄4
1 1
CO-7 5687015 37.80 102600 46600 2 7 14 1 ⁄ 4 or 1 ⁄ 2 1 --
CO-8 5687215 54.00 144600 65700 2 1⁄ 4 8 16 - 11⁄ 4 or 11⁄ 2 ⁄8 or 1
7
Nominal Nominal
Approximate Working Diameter Inside Dimensions Diameter Inside Dimensions
Link Cat. Wgt. Each Load Limit Material (in.) Width (in.) Length (in.) Material (in.) Width (in.) Length (in.)
No. No. lb lb kg A B C D E F
7 37 1 13 1
⁄ 32 5680315 2.60 6300 2900 ⁄ 64 2 ⁄2 5 ⁄ 32 1 ⁄2 3
9 13 17
⁄ 32 5682215 4.40 12900 5900 ⁄ 16 3 6 ⁄ 32 1 1⁄ 2 2 3⁄ 4
3
11⁄ 8 25
⁄8 5682315 9.50 26400 12000 4 8 ⁄ 32 1 9⁄ 16 2 7⁄ 8
1
⁄2 5682415 16.00 45000 20500 11⁄ 4 4 8 1 3 5
5 5 1 1 1
⁄8 5682515 31.75 67800 30800 1 ⁄8 5 ⁄4 10 ⁄2 1 ⁄4 4 6
3
⁄4 5682615 50.00 105900 48100 1 7⁄ 8 6 12 11⁄ 2 4 6
7
⁄8 5682715 65.90 128100 58200 2 1⁄ 4 8 16 1 ⁄43
4 6
1 7
1 5681615 92.20 143100 65000 2 ⁄4 8 16 1 ⁄8 5 7
1
1 ⁄4 5682015 131.00 216900 98600 2 3⁄ 4 9 16 2 1⁄ 8 6 9
Dimensions and weights are approximate.
These items are made to order.
22-05
CAMPBELL® CHAIN
272-G, EYE & EYE SWIVELS DROP-FORGED CARBON STEEL
• Standard Material: Drop-forged carbon steel
• Standard Finish: Galvanized to ASTM A-153 specification
• Design Factor: 5 to 1
• Other Features: Meets Federal Specification
RR-C-271 Type VII, Class 2
Working
Size Cat. Load Limit Dimensions Weight/
in. No. lb kg A B C D L R 100 (lbs.)
1
⁄4 3630435 850 386 11⁄ 4 3
⁄4 3
⁄4 1 1⁄ 16 3 3⁄ 8 2 7⁄ 8 15.5
5 5 3 1 1 5
⁄ 16 3630535 1250 567 1 ⁄8 ⁄4 1 1 ⁄4 4 ⁄8 3 ⁄8 28.5
3
⁄8 3630635 2250 1021 2 1 1 1⁄ 4 11⁄ 2 5 41⁄ 4 59
1 1 1 1 15 3 3
⁄2 3630835 3600 1633 2 ⁄2 1 ⁄4 1 ⁄2 1 ⁄ 16 6 ⁄4 5 ⁄4 124
5
⁄8 3631035 5200 2359 3 1 5⁄ 8 1 3⁄ 4 2 3⁄ 8 8 6 3⁄ 4 238
3 1 3 1 3 1
⁄4 3631235 7200 3266 3 ⁄2 1 ⁄4 2 2 ⁄2 8 ⁄4 7 ⁄4 365
7
⁄8 3631435 10000 4536 4 2 1⁄ 8 2 1⁄ 4 3 1⁄ 16 10 3⁄ 8 8 3⁄ 4 568
1 1 1 1 3 3
1 3631635 12500 5670 4 ⁄2 2 ⁄4 2 ⁄2 3 ⁄2 11 ⁄4 9 ⁄4 891
11⁄ 4 3632035 18000 8165 5 5⁄ 8 3 1⁄ 4 3 1⁄ 8 3 7⁄ 8 1315⁄ 16 111⁄ 2 1627
Working
Size Cat. Load Limit Dimensions Weight/
in. No. lb kg A B C K L N P R 100 (lbs.)
1 1 3 3 1 5 3
⁄ 4 1⁄ 4 7
⁄4 3640435 850 386 1 ⁄4 ⁄4 ⁄4 ⁄2 3 ⁄ 32 2 ⁄ 16 21
5 5 3 1 3 13
⁄ 16 5⁄ 16 7
⁄ 16 3640535 1250 567 1 ⁄8 ⁄4 1 ⁄2 3 ⁄4 2 ⁄8 32
3 1 11 5
1 ⁄ 16 3⁄ 8
1 1
⁄8 3640635 2250 1021 2 1 1⁄4 ⁄ 16 4 ⁄8 3 ⁄2 71
1 1 1 1 3 1
1 ⁄ 8 1⁄ 2
3 11
⁄2 3640835 3600 1633 2 ⁄2 1 ⁄4 1 ⁄2 ⁄4 6 ⁄8 4 ⁄ 16 122
5 5 3 15 3
1 ⁄ 2 5⁄ 8
1 1
⁄8 3641035 5200 2359 3 1 ⁄8 1 ⁄4 ⁄ 16 7 ⁄8 5 ⁄2 228
3 1
1 3⁄ 4 1
⁄4 3641235 7200 3266 3 ⁄2 2 1 ⁄8 8 1 3⁄ 4 3⁄ 4 5 7⁄ 8 345
7
⁄8 3641435 10000 4536 4 2 1⁄ 8 2 1⁄ 4 1 3⁄ 16 9 3⁄ 8 2 1⁄ 16 7⁄ 8 7 564
1
2 1⁄ 4 1
1 3⁄ 4 7
2 7⁄ 16 1 1⁄ 8 5
1 3641635 12500 5670 4 ⁄2 2 ⁄2 11 ⁄ 16 8 ⁄8 933
1 5
3 1⁄ 4 1
2 1⁄ 16 2 13⁄ 16 1 3⁄ 8 7
1 ⁄4 3642035 18000 8165 5 ⁄8 3 ⁄8 12 8 ⁄ 16 1651
23-05
CAMPBELL® CHAIN
DO NOT EXCEED the working load limit. DO NOT shock or impact load. DO NOT USE if the fitting is visibly distorted or worn. C
24-05
Compact C-hooks
Working Jaw
Load Limit Product Capacity Weight Three types (close stacker, low cost and slit coil)
(lbs.) Code (in.) (lbs.) High-strength quenched & tempered alloy steel
16,750 694810 0-4 115 1/2
Rugged, lightweight and 2-3 times more
16,750 694811 3 1/2-7 7/8 131
resistant to bending than carbon steel
11,600 694812 0-4 118
11,600 694813 3 1/2-7 7/8 133 Low tare weight reduces wear and tear on
12,700 694814 0-4 126 1/2 crane and coils
12,700 694815 3 1/2-7 7/8 144 Large radial corners minimize stress and
14,400 694816 0-4 137 1/2 reduce coil damage
14,400 694817 3 1/2-7 7/8 159 1/2 Curved saddles prevent coil damage
16,600 694818 0-3 1/2 148 1/2 Counterbalanced to hang level when empty
11,000 694819 0-3 1/2 151
Centered under bail for proper balance
11,000 694820 3 1/8-6 5/8 188
22,000 694821 0-4 139 Capacity 100 lbs. to 50 tons
22,000 694822 3 1/2-7 7/8 154
25-05
SKOOKUM
ALLOY STEEL
ANCHOR PATTERN
SHACKLES
ALLOY STEEL
CHAIN PATTERN
SHACKLES
26-05
E
D
D
B B
C A F C A F
CHAIN PATTERN
Showing double nut pin arrangement
P.O. Box 3645 • 2901 Utah Avenue South • Seattle, WA 98124 • Phone (206) 623-8500 • Fax (206) 621-9834
E-mail: info@wachain.com • VISIT OUR WEB SITE FOR MORE INFORMATION: www.wachain.com
0031-03 4/27/05 10:45 AM Page 1
27-05
CARPENTER STOPPER
Compact design cable grip for cable sizes from 3/8” to 3”. Working load limit
exceeds that of matching cable size. Hinged body has fixed smooth groove on
one side; movable wedge, grooved with lay of cable, on the facing side. Movable
wedge enables cable to be drawn tight. Cable can be released while under full
tension by releasing latch on hinged lid. Lid is securely latched with pin while
in use. Shackle holes are provided for rigging bridle to stopper. Bridles available
with stoppers if desired.
5-1/2”
16”
5-1/4” No. 2 3”
10-1/8” 10”
3-3/4”R 1”R
4” 31-1/2”
2-3/16”R
/4”
10”
5-1
2-1/4”
2”R
7-5/16”
1-1/2”R 7” 6”R 4-3/8”
5-3/4” 4-1/2”
2”R
17-1/2” 23-1/2” 15-1/2”
2”
31”
7” 4-5/8” Dia. Core Hole
2”R
3-1/2” 3-1/4”
11-1/4”
22-1/2”
P.O. Box 3645 • 2901 Utah Avenue South • Seattle, WA 98124 • Phone (206) 623-8500 • Fax (206) 621-9834
E-mail: info@wachain.com • VISIT OUR WEB SITE FOR MORE INFORMATION: www.wachain.com
0026-04 5/9/05 10:46 AM Page 1
28-05
Standard mooring units are available with 40, 60, 75, 100, 125,
150 and 200 tons S.W.L. and as single, double, triple, quadruple
or sextuple versions. The units can be mounted on concrete or
steel deck structures. Units are designed to operate through 180
degrees horizontally and 45 degrees vertically. They can also be
supplied with integral capstans, and/or other features such as electric or hydraulic remote release systems controlled by
a remote panel, and/or mooring load measurement systems.
Hooks can be tested under supervision of LR, ABS, DNV, BV, RINA or any other required test classification society.
The towing hook features a rotating disc which rotates freely after
release, avoiding high release impacts on the hook. This free
rotation also reduces impacts on ships’ foundations, and increases
onboard comfort.
Standard towing hooks are available with 7, 15, 25, 45, 65, and 100
tons S.W.L. Higher loads are available upon request. The hooks can also be delivered incorporating remote release
systems and/or load measurement systems.
Hooks can be tested under supervision of LR, ABS, DNV, BV, RINA or any other required test classification society.
Shock absorbing spring construction units, rail type units, and/or any other special configurations are available upon
request.
29-05
These simple but effective hooks are used for berthing vessels A lanyard run from the ship to the hook provides for a “remote”
to buoys by running the ship’s hawsers through the release hook release of the lines. Buoy release hooks are available in 300,000-
situated on top of the mooring buoy. and 400,000-pound load rating, with up to a 6” jaw radius.
Quick-release hooks, unlike their buoy release counterparts, also be supplied with integrated capstans and/or load-monitoring
can be tripped while under full load. They are available in single, devices, if required.
double, triple, and quadruple mounting, with capacities from Manual release hooks, with capacities from 10 to 200 tons, can
10 to 400 tons. The release mechanism can be operated locally be tripped easily by hand while under maximum line tension.
or from a remote station, with a manual, pneumatic, or Once tripped, line tension or just the weight of the slack line
electrically-controlled hydraulic system. releases the hook, and the line falls free. The hook is then
The hooks are designed to swing freely 180 degrees horizontally manually returned to its working position.
and 45 degrees vertically to maintain a straight pull on the
mooring lines at all times. Every hook features a safety latch to STANDARD SIZES:
prevent accidental opening, and all models can be certified by 10-TON 25-TON 50-TON 60-TON 80-TON
the agency of your choice, including ABS and DNV. They can 100-TON 150-TON 200-TON 400-TON
30-05
SKOOKUM
HORIZONTAL DECK SHEAVES
ROLLER FAIRLEADS
• Alloy steel rollers, heat treated • “Stressproof” steel pins
• Bronze bushings • Bolt down bases
P. O. Box 280
Hubbard, OR 97032
Tel: (503) 651-3175
An Ulven Company (800) 547-8211
Manufacturer of Skookum Blocks, Skookum Alloy Shackles, Fax: (503) 651-3409
and Custom-Designed Marine Products E-mail: skookum@ulvencompanies.com
Also available: Balanced Head Fairleads, Vertical & Horizontal Deck Lead Sheaves Web: www.skookumco.com
0031-04 4/27/05 10:48 AM Page 1
31-05
SKOOKUM
P. O. Box 280
Hubbard, OR 97032
Tel: (503) 651-3175
An Ulven Company (800) 547-8211
Manufacturer of Skookum Blocks, Skookum Alloy Shackles, Fax: (503) 651-3409
and Custom-Designed Marine Products E-mail: skookum@ulvencompanies.com
Also available: Balanced Head Fairleads, Vertical & Horizontal Deck Lead Sheaves Web: www.skookumco.com
0034-03 4/27/05 10:49 AM Page 1
32-05
Smith Berger Marine, Inc. See our page Contact us for information on additional
7915 10th Ave., S., Seattle, WA 98108 in the sizes for use with smaller wire ropes. Our
advertising section
Tel. 206.764.4650 • Fax 206.764.4653 for more engineering and manufacturing experience
E-mail: sales@smithberger.com of our allows us to customize any of our products
standard products!
Website: www.smithberger.com to suit YOUR requirements.
0035-03 4/27/05 10:50 AM Page 1
33-05
Standard Features
• Designed for breaking strength of wire with 90° wrap • Hardened rope grooves for longer life
on sheave and +/- 90° rotation of swivelhead • Weld down base
• Sealed grease lubricated Timken tapered • Removable guide roller
roller bearings
Optional Features
• Tail Sheaves / Tail Rollers • Load monitoring system • Painted to specification
• Bolt down base • Special sheaves for high • Third party certification
performance synthetic ropes
34-05
MANUAL WINCHES
• All steel construction
• Machine cut gears and ratchets
• Bronze bushed bearings
• Alemite fittings for proper lubrication
• True right and left hand models for use in pairs
• Positive no-slip tension
• Fast cranking with handle
• Quick release action
• Hand brake for run-out control
• Lever ratchet for extra high tension
Line Pull (1)
Ratchet with Mounting Dimensions
Dog Standard
Model Holding Handwheel Extension
DF-156 (1) One Man One Man
S. Tons Lbs. Lbs.
10-6-M 10 5,200 7,000
20-7-M 20 14,000 14,400
40-11-M 40 14,000 17,800
40-18-M 40 14,000 17,800
60-11-M 60 24,000 28,800
(1)
Hold and line pull ratings are for first layer of cable.
Model Weight
DF-156 A B C D E F G (Lbs)
10-6-M 1' 7-7/16" 9-13/16" 2' 1" 3' 0" 3' 4-3/4" 1' 9" 2' 7-7/8" 500
20-7-M 2' 0-1/4" 14-1/2" 1' 11-15/16" 3' 0" 3' 3-5/16" 2' 6" 3' 1" 850
40-11-M 2' 5-1/64" 1' 7-1/2" 2' 3-1/4" 3' 9" 3' 11-1/2" 3' 0" 3' 9-1/4" 1250
40-18-M 3' 0-1/4" 2' 2-1/2" 2' 3-1/4" 3' 9" 3' 11-1/2" 3' 0" 3' 9-1/4" 1350
60-11-M 2' 8-7/8" 1' 10-1/2" 2' 10-1/4" 4' 6-7/16" 4' 10-1/2" 3' 10-7/8" 2' 9-1/16" 2100
35-05
HYDRA-ELECTRIC WINCH
• Pilot house and/or deck push button control.
• Self-contained electric-hydraulic package. Quick installation.
• Run electric wire to source. No piping required.
• Automatic brake. Spring loaded, noiseless. Can be released for hand operation.
• Simple instant reversing by hydraulics.
• Standard C Face, 1750 RPM enclosed (T.E.F.C.) electric motor.
• Mechanical holding dog for emergency use. Positive.
• Machine cut gears, more efficient.
• Ball bearings on high speed shaft and large bronze bushings with
grease fittings on all other shafts.
• Cable guard prevents cable damage from gears.
• Provisions for emergency operation by hand.
36-05
DF-AW-1200-30-2/16H DF-AW-1000-30-1/16E
Cable Size 1-7/8 inch 1-5/8 inch
Drum Capacity 1200 ft. 1000 ft.
Line Pull (First Layer) 25,000 lbs. 15,000 lbs.
@ PSI 2400
Line Speed 30 FPM 30 FPM
Drive Hydraulic Electric
Heads Two One
Head Size 16 inch 16 inch
CAPSTANS
DF-C-18-1-5-30 HC DF-C-18-2-12/40-6/80 E
Head Size 18 inch 18 inch
No. of Speeds One Two
Line Pull 5,000 lbs. 12,000 lbs. / 6,000 lbs.
Line Speed 30 FPM 40 FPM / 80 FPM
Drive Hydraulic Electric Hydraulic
37-05
PRECAUTIONS:
• DO NOT EXCEED THE SAFE WORKING LOAD LIMIT.
• DO NOT EXCEED THE MAXIMUM LOAD TO RELEASE LIMIT.
Standard
38-05
MacGREGOR GROUP
CARGO SECURING SYSTEMS
Fixed Items
Raised ISO Twistlock Foundations Sliding ISO Foundations
Dovetail Foundations Doubling Plates Welding Cones Guide Fittings General Cargo
Flush ISO Pockets ISO / RoRo Pockets RoRo-Lashpoints ISO Corner Castings
Lashing Plates D-Rings Slewing Eyes for Lashing Counter-Bearings for Lateral
Bridges Support
Lashing Units
Lashing Bars Turnbuckles
LB-11
TBS-3G
LB-31
B-47/11
LB-28
LB-17
TBO-1G
LB-10
‘Double in One’ TBS-4G
All container securing products are
• Designed to fit ISO container standards
• In compliance with all applicable international rules and regulations
• Can be supplied with approval of all major classification societies
MacGREGOR-CONVER MacGREGOR-CONVER PACIFIC MARINE & INDUSTRIAL MARITIME MARKETING ASSOCIATES, INC
www.macgregor-group.com Zum Panrepel 41 14 Madison Court P.O. Box 70520 8926 SW 129th Street
28307 Bremen GERMANY Manalapan NJ 07726 Richmond CA 94807-0520 Miami FL 33176
Phone: +49-421-83 91 83 Phone: 973-568-8743 Phone: 510-233-2310 Phone: 305-238-2375
Fax: +49-421-83 91 899 Fax: 732-431-6613 Fax: 510-233-2322 Fax: 305-232-4372
E-mail: sales@macgregor-scr.com E-mail: hpvmacscr@aol.com E-mail: sales@pacificmarine.net E-mail: sales@actiontiedown-mma-cent.com
0039-04 4/27/05 10:58 AM Page 1
39-05
MacGREGOR GROUP
CARGO SECURING SYSTEMS
OSHA Fittings on Deck
Fully Symmetrical SAT Midlock for Bottom and Conventional SAT First Truly Universal
Intermediate Position ‘Twistlock’
Combines
Function of SAT
and Midlock
--’one fits all’--
Manual Twistlocks
MacGREGOR-CONVER MacGREGOR-CONVER PACIFIC MARINE & INDUSTRIAL MARITIME MARKETING ASSOCIATES, INC
www.macgregor-group.com Zum Panrepel 41 14 Madison Court P.O. Box 70520 8926 SW 129th Street
28307 Bremen GERMANY Manalapan NJ 07726 Richmond CA 94807-0520 Miami FL 33176
Phone: +49-421-83 91 83 Phone: 973-568-8743 Phone: 510-233-2310 Phone: 305-238-2375
Fax: +49-421-83 91 899 Fax: 732-431-6613 Fax: 510-233-2322 Fax: 305-232-4372
E-mail: sales@macgregor-scr.com E-mail: hpvmacscr@aol.com E-mail: sales@pacificmarine.net E-mail: sales@actiontiedown-mma-cent.com
Wortelboer Edit Page 4/27/05 10:59 AM Page 1
40-05
41-05
HALL ANCHOR
WT. A B C D F Wt. A B C D F
kg mm mm mm mm mm kg. mm mm mm mm mm
50 575 410 184 300 15 3060 2261 1596 720 1172 80
75 660 480 210 340 15 3300 2330 1636 734 1180 80
100 723 510 230 375 20 3540 2336 1650 674 1210 80
125 780 550 245 405 20 3780 2679 1844 733 1295 80
150 835 580 264 430 20 4050 2466 1740 712 1278 90
180 888 625 281 454 20 4320 2667 1790 763 1290 90
200 915 645 290 470 25 4590 2784 1889 780 1384 90
225 950 670 300 493 25 4890 2923 2011 804 1413 100
240 985 694 312 510 25 5250 2728 1910 846 1364 100
275 1020 710 322 527 25 5510 2788 1952 864 1394 100
300 1050 738 330 543 30 6000 3270 2033 829 1625 110
325 1075 758 338 557 30 6450 2920 2048 906 1461 110
360 1190 778 346 570 30 6900 2930 2064 932 1612 110
400 1150 810 360 595 30 7350 3072 2150 950 1636 120
420 1175 826 368 607 30 7800 3113 2179 965 1556 120
450 1200 845 373 620 35 8300 3208 2246 995 1604 120
480 1220 860 380 630 35 8700 3253 2270 1005 1626 130
500 1240 875 386 640 35 8900 3268 2275 1012 1634 130
570 1280 904 400 660 40 9300 3301 2311 1023 1650 130
600 1320 930 410 680 40 9900 3330 2360 1045 1685 140
660 1360 955 420 700 40 10200 3338 2372 1070 1694 140
700 1390 980 430 715 45 10500 3438 2407 1075 1719 140
750 1425 1000 440 730 45 11100 3502 2452 1086 1751 140
780 1450 1030 450 750 45 11700 3565 2495 1105 1780 150
850 1480 1050 460 765 50 12300 3600 2520 1140 1800 150
900 1490 1053 480 772 50 12900 3681 2577 1141 1840 150
950 1520 1072 484 787 50 13500 3738 2616 1159 1869 160
1020 1545 1090 496 800 55 14100 3793 2655 1176 1896 160
1140 1600 1126 512 825 55 14700 3845 2690 1190 1925 160
1200 1650 1165 530 855 55 15400 3880 2716 1210 1940 170
1290 1670 1180 535 865 60 16100 3964 2775 1229 1982 170
1350 1700 1205 550 890 60 16900 4030 2820 1250 2015 170
1440 1800 1245 555 895 65 17800 4099 2869 1270 2049 180
1590 1890 1260 565 900 65 18800 4175 2920 1295 2085 180
1740 1910 1290 582 945 65 20000 4262 2985 1320 2130 180
1920 1930 1362 616 999 70 21500 4365 3055 1355 2180 200
2100 2020 1407 623 1020 70 23000 4465 3125 1385 2230 200
2280 2040 1446 640 1033 70 24500 4560 3190 1415 2280 200
2460 2120 1483 667 1076 75 26000 4651 3255 1442 2325 220
2640 2170 1519 672 1085 75 27500 4720 3315 1470 2370 220
2850 2200 1540 700 1140 75 29000 4825 3375 1495 2410 220
42-05
STOCKLESS ANCHOR
Anchor Head Shank Proof
Weight No. No. A B C D E F G H J Test
200 2 2 27 18 9-1/2 15-1/8 5-1/8 5-1/2 1 5 4 8300
300 4 3 32 23-1/4 11-11/16 17/16 6-11/16 5-1/2 1 5 4-1/2 10900
400 6 3 32 25-3/4 13 19 7 5-1/2 1 5 4-1/2 13000
500 8 4 35 26-1/2 14 20 7 7 1-1/4 6 5-1/2 15000
700 12 5 38 29-1/2 15-5/8 23-1/2 8-1/8 7 1-1/4 6 5-3/4 18700
775 13 5 38 32 16-7/8 24-3/4 8-5/8 7 1-1/4 6 5-3/4 20050
900 15 7 42 32 17 24 9 7-1/2 1-1/2 6-1/2 6-1/2 22300
1000 16 7 42 33-5/8 18 25-1/8 9-3/4 7-1/2 1-1/2 6-1/2 6-1/2 24100
1260 18 8 46 36-3/8 18-3/4 28-3/4 9-7/8 8-1/2 1-3/4 7-1/2 6-3/4 28800
1430 20 9 49 39 20 28-7/8 10-3/4 9-1/4 2 8-1/2 7 31700
1540 21 9 49 40 20-1/2 30-1/2 11 9-3/4 2 8-1/2 7 33600
1600 22 9 49 40 20-1/2 30-1/2 11 9-3/4 2 8-1/2 7 34600
1750 23 10 52 41-1/2 21 33-1/4 11-3/8 9-3/4 2 8-1/2 7-1/4 37150
1875 24 10 52 43 22 34-3/4 12 9-3/4 2 8-1/2 7-1/4 38400
1950 25 10 52 43 22 34-3/4 12 9-3/4 2 8-1/2 7-1/4 40550
2100 26 12 58 44-3/4 23 35-3/4 12-1/8 9-3/4 2 8-1/2 7-1/2 43050
2500 28 12 58 44-3/4 23-1/4 35-3/4 12-1/8 9-3/4 2 8-1/2 7-1/2 49650
2800 30 12 58 48 25 35-7/8 13 9-3/4 2 8-1/2 7-1/2 54500
3000 31 14 64 47 25-1/2 36 12-3/4 12 2-1/2 10 8-3/4 57700
3500 33 14 64 52-3/4 27-1/2 39-1/2 14-1/4 12 2-1/2 10 8-3/4 65200
4000 35 15 70-5/8 53-1/4 27-1/2 39-1/4 14-1/2 12 2-1/2 10 9-1/2 72600
4500 37 15 70-5/8 56-3/4 29 42 15 12 2-1/2 10 9-1/2 79700
5000 39 18 76 57-1/2 30 42 15-5/8 15 3 12 10-1/4 86500
6000 43 18 76 63-1/2 33-1/4 47 17-1/4 15 3 12 10-1/4 99100
G J
6300 44 18 76 63-1/2 33-1/4 47 17-1/4 15 3 12 10-1/4 102700
6500 45 20 82 63-1/2 33 47-5/8 17-1/4 15 3 12 10-3/4 105100
F 6750 46 20 82 65 33-3/4 48-3/4 17-5/8 15 3 12 10-3/4 107900
7000 47 20 82 66-5/8 34-3/4 49-3/4 18 15 3 12 10-3/4 110700
7600 48 20 82 67-1/2 34-3/4 49-3/4 18-3/8 15 3 12 10-3/4 117300
8100 49 22 93-1/2 68-1/4 34-3/4 48-7/8 18-1/4 17 3-1/2 13-1/4 11-1/2 122500
8600 50 22 93-1/2 68-1/2 35-3/4 50-1/2 18-1/2 17 3-1/2 13-1/4 11-1/2 127500
E E
9000 51 23 96 70-1/4 36-3/4 51-3/4 19-1/8 17 3-1/2 13-1/4 11-1/2 131400
A 10000 53 24 96 75-1/2 39 58 21 19 4 14-3/4 12 140400
11000 53 24 96 75-1/2 39 58 121 19 4 14-3/4 12 148500
D 12000 56 24 96 76-3/4 40 58 21-3/4 19 4 14-3/4 12 156100
13000 56 26 98 76-3/4 40 58 21-3/4 19 4 14-3/4 12 163500
14000 59 27 103 80-1/2 44 60 22-1/4 19 4 14-3/4 13 170500
15000 60 28 103 86 46 65 24 19 4 14-3/4 13 176800
16000 62 30 108 86 46 65 24 19 4 14-3/4 13 182800
18000 64 32 112 88-1/4 48-1/4 65-5/8 24-3/4 22 4-1/2 16-3/4 13 194200
18900 64 32 112 88-1/4 48-1/4 65-5/8 24-3/4 22 4-1/2 16-3/4 13 198800
20000 66 34 112 96 50 72 26 22 4-1/2 16-3/4 14 204300
B 25000 67 35 120 103 53-3/4 77-1/2 28 22 4-1/2 16-3/4 15 227000
30000 69 37 128 110 57-1/4 82-1/2 29-7/8 24 5 18-3/4 16 247600
35000 70 38 135 116 60 87 31-1/2 25 5 19 17 265600
40000 71 39 140 121 63 91 32 26 5-1/2 20 17-1/2 278200
C 45000 72 40 147 126 65 94 34 27 5-1/2 21 18 287550
50000 73 41 152 131 68 99 35 28 6 21-1/2 19 292600
Dimensions above are in inches, anchor weight in pounds.
Certified drawings of anchors listed above, and of intermediate and larger sizes, will be furnished on request.
43-05
F J
E
A
B C
44-05
Weight A B C D E F G Proof
200 30-7/8 29-3/4 12 20-1/8 16-1/4 5-1/2 1 10,000
300 35-3/8 34 13-3/4 23 18-1/2 5-1/2 1 13,000
500 41-3/4 40-1/4 16-3/8 27-1/4 21-7/8 7 1-1/4 18,100
1,000 52-3/4 50-3/4 20-5/8 34-3/8 27-5/8 7-1/2 1-1/2 30,000
5,000 90-3/8 86-3/4 35-1/4 58-3/4 47-1/4 15 3 107,000
10,000 113-3/4 109-1/4 44-1/2 74 59-1/2 17 3-1/2 165,600
15,000 130 125 50-3/4 84-5/8 68 19 4 213,700
20,000 143-1/4 137-5/8 56 93-1/4 75 22 4-1/2 249,600
40,000 180 173 70 117 94 26 5-1/2 386,400
MOORFAST ANCHOR
Weight A B C D E F G Proof
1,000 61 75 19 37 25 9-3/4 2 30,000
3,000 88 109 27 54 37 15 3 72,500
8,000 122 153 38 75 51 17 3-1/2 145,600
10,000 131 157 41 80 55 19 4 165,600
14,000 147 177 45 90 61 19 4 205,000
16,000 153 187 48 94 64 22 4-1/2 222,900
20,000 164 196 51 102 69 22 4-1/2 249,600
30,000 187 217 59 118 79 24 5 320,000
40,000 214 248 63 127 86 26 5-1/2 386,400
Weight A B C D E F G Proof
200 47-1/2 45 14-1/4 29 18-7/8 5-1/2 1 10,000
500 61-1/2 58-1/2 19 37-1/2 24 7-1/2 1-1/2 18,100
1,000 75 71 24-1/2 46 29-1/4 9-3/4 2 30,000
5,000 118 112 38-3/4 72 44-3/4 17 3-1/2 107,000
10,000 144 137 49 88 55-1/4 22 4-1/2 165,600
15,000 157 149 53-5/8 96 61-7/8 24 5 213,700
20,000 173 164 59 106 68 25 5-1/2 249,600
30,000 198 189 67-1/2 121 78 29 5-1/2 319,400
40,000 218 240 75 131 86 32 6 386,400
45-05
BUOY CHAIN
A C
USCG –E/GICP-245
46-05
LISTER
LISTER
LISTER
APPROVED
47-05
LISTER
USN
USN
APPROVED
L Number Nominal
Length over of weight
Link 6 links Link links Proof Break per 15-
Chain length inches width per 15- test test fathom
size A B fathom load load shot
inches inches Minimum Nominal Maximum inches shot (lb) (lb) (lb)*
3/4 41/2 19 3/8 191/2 1913/16 25/8 359 48,000 75,000 480
7/8 51/4 22 5/8 22 3/4 231/16 31/8 305 64,000 98,000 660
1 6 25 7/8 26 26 3/8 39/16 267 84,000 129,000 860
11/8 6 3/4 29 1/16 291/4 29 5/8 4 237 106,000 161,000 1,080
11/4 71/2 32 5/16 321/2 32 15/16 41/2 217 130,000 198,000 1,350
13/8 81/4 35 9/16 35 3/4 361/4 415/16 193 157,000 235,000 1,630
11/2 9 3813/16 39 391/2 53/8 177 185,000 280,000 1,940
15/8 93/4 42 421/4 427/8 57/8 165 216,000 325,000 2,240
13/4 101/2 451/4 451/2 461/8 65/16 153 249,000 380,000 2,590
17/8 111/4 48 1/2 48 3/4 491/2 6 3/4 143 285,000 432,000 2,980
2 12 5111/16 52 523/4 73/16 135 318,000 454,000 3,360
21/8 123/4 5415/16 551/4 561/8 75/8 125 357,000 510,000 3,790
21/4 131/2 58 3/16 581/2 59 3/8 81/8 119 396,000 570,000 4,250
23/8 141/4 617/16 613/4 623/4 8 9/16 113 440,000 628,000 4,730
21/2 15 6411/16 65 66 9 107 484,000 692,000 5,270
25/8 15 3/4 67 7/8 681/4 691/4 97/16 101 530,000 758,000 5,820
23/4 161/2 711/8 711/2 72 9/16 97/8 97 578,000 826,000 6,410
27/8 171/4 74 3/8 743/4 75 7/8 10 3/8 93 628,000 897,000 7,020
3 18 77 5/8 78 79 3/16 10 13/16 89 679,000 970,000 7,650
31/8 183/4 8013/16 811/4 821/2 111/4 87 732,000 1,046,000 8,320
31/4 191/2 841/16 841/2 853/4 1111/16 83 787,000 1,124,000 9,010
33/8 201/4 87 5/16 873/4 89 121/8 79 843,000 1,204,000 9,730
31/2 21 90 9/16 91 925/16 12 5/8 77 900,000 1,285,000 10,500
35/8 213/4 93 13/16 941/4 955/8 1215/16 73 958,000 1,369,000 11,300
33/4 221/2 97 1/16 971/2 987/8 13 3/8 71 1,019,000 1,455,000 12,000
37/8 231/4 1001/4 1021/4 102 3/16 14 69 1,080,000 1,543,000 12,900
4 24 1031/2 104 105 1/2 14 3/8 67 1,143,000 1,632,000 13,700
43/4 281/2 122 15/16 1231/2 125 5/16 171/8 57 1,700,000 2,550,000 18,900
*Not mandatory, for information only.
48-05
49-05
DOCK FENDER SIZE / DIA. 1/2 inch 5/8 inch 3/4 inch 1 inch 12.7 mm 15.9 mm 19.1 mm 25.4 mm
50-05
Specify swivel
shackle or
standard shackle
at time of order.
51-05
ASSEMBLING PUNCHES
Link Size E K H L
Punch No. Inches Inches Inches Inches Inches Handle
P-1A 5/8 - 3/4 3/4 15/64 5 1-1/8
P-2A 7/8-1 3/4 17/64 5 1-1/8
P-3A 1-1/8
1-1/4 - 1-3/8 1 3/8 6 1-3/8
P-4A 1-1/2 - 1-5/8 1 33/64 6-1/2 1-3/8
P-5A 1-3/4 - 2 1 21/32 6-1/2 1-1/2 x
P-6A 2-1/8 - 2-3/8 1 51/64 6-1/2 1-5/8 x
P-7A 2-1/2 - 2-7/8 1-1/8 61/64 6-1/2 1-5/8 x
P-8A 3 1-1/4 1-9/64 7 1-3/4 x
DISASSEMBLY PUNCHES
Link Size E F H G
Punch No. Inches Inches Inches Inches Inches Handle
P-1D 5/8 - 3/4 3/4 13/64 5 1-1/4
P-2D 7/8 -1 3/4 15/64 5 1-1/2
P-3D 1-1/8
1-1/4 - 1-3/8 1 5/16 6 2-1/2
P-4D 1-1/2 - 1-5/8 1 15/32 6-1/2 2-7/8
P-5D 1-3/4 - 2 1 9/16 6-1/2 3-1/4 x
P-6D 2-1/8 - 2-3/8 1 11/16 6-1/2 3-1/2 x
P-7D 2-1/2 - 2-7/8 1-1/8 13/16 6-1/2 3-1/2 x
P-8D 3 1-1/4 1 7 4 x
MADE IN U.S.A.
Other SEA-LINK Products: P. O. Box 596 (90748)
910 Mahar Ave., Wilmington, CA 90744
ALLOY TOWING SHACKLES
(800) 322-3131 • (310) 522-9698
TOWING PLATES
Fax: (310) 522-1043
CHAIN STOPPERS E-Mail: waterman@bigplanet.com
See Our Ad in the Advertising Section FENDERS – BUOYS www.watermansupply.com
0052-04 4/27/05 11:20 AM Page 1
52-05
ACSA
53-05
ACSA
mm inches kg lbs kg kg
24 15/16 144 101 36 2,1 4.6 34000 48500
29 1-1/8 174 122 44 4,8 10.6 49200 70400
32 1-1/4 192 134 49 5,0 11.0 59500 84900
36 1-7/16 216 151 55 8,0 17.6 76700 109400
38 1-1/2 228 160 58 9,0 19.8 83300 118900
42 1-5/8 252 176 64 12,0 26.5 102000 143400
44 1-3/4 264 185 67 14,0 30.8 111900 159900
46 1-13/16 276 193 70 15,0 33.1 119800 171100
48 1-7/8 288 202 73 18,0 39.7 130000 185100
51 2 306 214 78 21,0 46.3 145400 207700
54 2-1/8 324 227 82 24,0 52.9 162000 231500
56 2-3/16 336 235 85 26,0 57.3 174000 248000
58 2-1/4 348 244 88 31,0 68.3 185400 265000
60 2-3/8 360 252 91 34,0 75.0 199600 285200
62 2-7/16 372 260 94 36,0 79.4 210000 300000
64 2-1/2 384 269 97 38,0 83.8 223000 319000
67 2-5/8 402 281 102 41,0 90.4 242900 347000
70 2-3/4 420 294 106 52,5 115.7 263500 376400
73 2-7/8 438 307 111 60,0 132.3 285000 407000
76 3 456 319 116 70,0 154.3 308200 440200
78 3-1/16 468 328 119 71,0 156.5 322000 459000
84 3-5/16 504 353 128 92,0 202.8 369300 527600
87 3-7/16 522 365 132 103,0 227.1 395100 564300
89 3-1/2 534 374 135 113,0 249.1 409000 584300
92 3-5/8 552 386 140 115,0 253.5 434800 621200
95 3-3/4 570 399 144 132,0 291.0 462300 660100
102 4 612 428 155 163,0 359.4 522100 746000
108 4-1/4 648 454 164 196,0 432.1 577000 825000
111 4-3/8 666 466 169 213,0 469.6 607000 867200
114 4-1/2 684 479 173 233,0 513.7 637300 910900
54-05
Commercial Grade
DEVIL’S CLAW TYPE
CHAIN STOPPERS
DIMENSIONS IN INCHES
DIMENSIONS IN INCHES
55-05
30°
60° 45°
All attachments equal the strength of the chain with which they are used. When ordering, specify size, type, reach, and attachments required.
56-05
57-05
Sash Chain Material: Low carbon steel; also available in solid bronze.
Finishes: Polished—Copper-plated—Zinc-plated.
Made from high carbon steel with high strength-to-weight ratio. All
High Test Chain (Grade 43) Grade 43 chain is proof tested with certificate available upon request.
58-05
CAMPBELL® CHAIN
2 1/0 2/0
3/0 4/0
5/0
5 4 3
2 1
1/0 2/0
4/0 8/0
Working Length
Trade Zinc Coated Galvanized Load Limit ft./ lb./ links/
Size Cat. No. Cat. No. lb kg carton 100' ft.
5† 0750524 — 55 25 100 4 13.0 • Uses: general-purpose applications
4† 0750424 — 70 32 100 5 12.0 • Standard Material: Low carbon steel
3† 0750324 0750334 90 41 100 6 10.9 • Standard Finish: Zinc Coated (ZC), Galvanized
(GALV)
2† 0750224 — 115 52 100 8 9.0
• Packaging: 100 foot cartons, (order unit is “feet”)
1† 0750124 — 155 70 100 10 7.8
• Do not use for overhead lifting
1/0 — 0751034 200 91 100 13 6.7
2/0 0752024 0752034 255 116 100 16 5.5
4/0 — 0754034 365 166 100 25 5.5 DO NOT EXCEED the working load limit for chain or
8/0 — 0758034 705 320 100 51 4.1 components. DO NOT use for overhead lifting. DO NOT
† Not recommended for use in swing sets. USE if the chain or components visibly distorted or worn.
59-05
3/16 5 5/8 650 0.65 880 .89 765 1.1 N/A N/A 405 1.5
1/4 6 3/4 1,125 1.15 1,485 1.57 1,315 1.95 1,200 1.6 540 2
5/16 8 1 1,710 1.8 2,295 2.45 2,050 3.05 1,870 2.5 900 2.9
3/8 9 1-1/8 2,430 2.6 3,240 3.55 2,900 4.35 2,700 3.6 1,215 4.1
7/16 11 1-1/4 3,130 3.5 4,320 4.8 3,915 5.9 3,500 4.8 1,575 5.3
1/2 12 1-1/2 3,780 4.6 5,670 6.3 5,085 7.7 4,400 6.2 2,385 7.5
9/16 14 1-3/4 4,590 5.9 7,200 8 6,435 9.8 5,200 7.6 3,105 10.4
5/8 16 2 5,580 7.2 8,910 9.9 7,825 12 6,100 9.5 3,960 13.3
3/4 18 2-1/4 7,650 10.4 12,780 14.3 11,200 17.2 8,400 13.5 4,860 16.7
13/16 20 2-1/2 9,900 12.7 17,000 17 14,425 21 N/A N/A 5,850 19.5
7/8 22 2-3/4 10,350 14.2 17,280 19.5 15,225 23.4 11,125 18 6,930 22.5
1-1/8 28 3-1/2 16,000 22.8 28,260 32.2 24,800 38.5 16,325 27.1 10,800 36
1-1/4 30 3-3/4 19,350 27.6 34,830 39.7 29,800 46.5 19,900 33.4 12,150 41.8
2-1/8 52 6-1/2 52,650 78 95,400 113 81,000 133 53,950 91 32,400 125
2-1/4 56 7 59,400 88 107,100 127 90,500 149 59,950 101 36,900 146
2-1/2 60 7-1/2 72,000 107 131,400 157 110,000 184 73,550 124 42,300 167
2-5/8 64 8 80,500 120 144,000 173 121,000 203 80,650 136 46,800 191
2-7/8 68 8-1/2 94,500 141 171,000 208 144,000 243 95,400 161 54,900 215
3 72 9 102,600 153 185,400 226 156,000 264 102,900 174 57,500 242
3-1/4 80 10 121,500 186 224,100 275 188,500 323 122,800 212 69,500 299
3-1/2 88 11 144,000 223 267,300 329 225,000 387 144,800 250 81,900 367
4 96 12 171,900 275 324,000 400 270,000 470 171,000 300 94,500 436
60-05
Southwest Ocean Services, Inc. Design & fabrication services for all types
5718 Armour Drive, Houston, TX 77020 of synthetic fiber ropes, hardware and
Tel: 713-671-9101 • Toll Free: 800-231-6687 rope systems. SYNTEC specialized rope
Fax: 713-671-2515 • E-Mail: sales@swos.net assemblies and hardware offer improved
Web: www.swos.net safety, efficiency and economy.
0025-03 4/27/05 11:33 AM Page 1
61-05
RISER PROTECTION NETS These very large nets attach to the bow and stern
columns on the starboard and portside of offshore
drilling/production units. They are designed to
engage and repel large debris and a typical offshore
supply vessel of 5,000 tons, away from the risers.
Steelite 12 Superline
& Steelite 12 Xtra Steelite & Steelite Xtra
Steelite and Steelite Xtra are ideal substitutes for steel wire rope, since they exhibit very high strength, low elongation,
low linear density and low specific gravity. Size for size they display the same strength as wire rope but with between
one-fifth and one-seventh of the weight. Additionally, depending upon construction, they have the advantage of floating
in water. Both products exhibit lower lash back energy than other synthetic fibres and unlike wire rope will not spiral or
un-lay dangerously on recoil.
Mooring and towline connection times can be reduced resulting in quicker turnaround periods. In port, vessels can be
securely moored with a smaller number of personnel. The lightweight properties of these ropes make handling easy
and reduce the risk of personal injury. Existing steel wire winches can be used with minor modifications to store the
equivalent length of either rope, offering opportunities for savings in maintenance costs on ancillary equipment.
Steelite is manufactured using high molecular weight Steelite Xtra is manufactured using ultra high molecular
polyethylene (HMPE) Dyneema® SK60 fibre. weight polyethylene (UHMPE) Dyneema® SK75 fibre.
Characteristics Typical Applications
• Floats • Mooring lines
• Flexible • Winch lines
• Performs well on winches • Deep-sea towing / tug assist lines
• Torque balanced • Face and wing wires
• Good abrasion resistance • Seismic survey towlines
• Pipe-pull ropes
• Melt point 150°C
• Sub-sea lift ropes
• Good UV resistance • Tethers
• Low water uptake
63-05
64-05
Superline
Superline ropes are constructed using a protective braided outer sheath
cover containing a number of load bearing cores. Since the cores are
primarily tensile strength members, their design can be optimized for
Superline construction. Cores are usually 3, 6, or 12 strand braided
construction. A range of cover designs are available, each displaying
individual characteristics for differing application situations.
65-05
66-05
M-Steel Winchline
A light weight floating winch line providing high
strength and low elongation. The 6/1 wire lay con-
struction load bearing twisted cores are protected by
a braided outer sheath. This rope is designed to be
durable for work on single drum and self tensioning
M-Steel Winchline winches. Available in high visibility yellow, blue or
Size (Dia) Size Weight Weight Minimum Strength white.
Inch mm (Circ) Lbs. per kgs per (Lbs) (kg)
Inch 100 Ft. 100 m Characteristics:
1" 24 3" 15.5 23 18,960 8,600
1-1/8" 28 3-1/2" 21.5 32 29,101 13,200 • Low stretch
1-5/16" 32 4" 29.6 44 37,699 17,100 • Flexibility with firm cross section
1-1/2" 36 4-1/2" 42.3 63 55,776 25,300 • Fully protected strength members
1-5/8" 40 5" 49.7 74 69,224 31,400
1-3/4" 44 5-1/2" 60.5 90 86,861 39,400 • Lightweight
2" 48 6" 77.9 116 106,703 48,400 • Torque generating
2-1/8" 52 6-1/2" 90.7 135 125,883 57,100
2-1/4" 56 7" 100.8 150 142,638 64,700 • Good abrasion resistance
2-1/2" 60 7-1/2" 114.9 171 165,125 74,900 • Relative density 0.92
2-5/8" 64 8" 128.3 191 190,918 86,600
• Low water absorbtion
2-3/4" 68 8-1/2" 141.8 211 208,996 94,800
3" 72 9" 155.9 232 235,892 107,000 • Fully UV stabilized
3-1/8" 76 9-1/2" 170.7 254 260,143 118,000 • Melt point 170° C
3-1/4" 80 10" 184.1 274 284,393 129,000
3-5/8" 88 11" 230.5 343 357,145 162,000
4" 96 12" 278.2 414 436,511 198,000
Typical Applications:
• Mooring winch rope
Flexiline 6
The robust 6/1 wire lay construction of this rope
gives it excellent shape retention and spooling
characteristics on a winch. Its elastic properties
negate the need for mooring springs / pendants.
67-05
68-05
69-05
12 STRAND & 12 x 12 STRAND SYNTHETIC ROPE - BRAID OPTIMIZED FOR BENDING (BOB)
High Strength • Low Stretch • Ultra Low Creep • Soft Hand • Torque Free • Easy Splicing
Nominal Size Approximate Minimum Specific gravity 1.18*
Diameter Number Weight Tensile Strength Melting point 284° F (140°C)*
Critical temperature 150° F (65°C)*
12 STRAND
1-3/4 44 5-1/2 102.7 152.8 314,000 1,396.7 BOB BEND OVER SHEAVE TEST
2 48 6 124.9 185.9 355,000 1,579.0 Tests were performed on a 9” (229mm) diameter steel
2-1/8 52 6-1/2 146.6 218.2 428,000 1,903.8 sheave with 3/4” (18mm) diameter ropes. Test load was
2-1/4 56 7 168.4 250.6 481,000 2,139.5 7,500 lbs. (3,500kgs), cycled at a rate of 6 cycles per
minute. All tests were run until complete rope failure.
2-1/2 60 7-1/2 198.3 295.1 530,000 2,357.4
2-5/8 64 8 215.5 320.7 596,000 2,651.0 Rope Type Cycles
2-3/4 68 8-1/2 245.7 365.7 660,000 2,935.7 Aramid Wire Lay Core
with Braided Polyester Jacket 762
3 72 9 293.2 436.3 780,000 3,469.4
12 Strand HMPE
3-1/4 80 10 361.6 538.1 940,000 4,181.1
with Polyurethane Coating 5,782
Tensile Strengths are determined in accordance with Cordage Institute 1500, Test Methods for Fiber Rope. 12 Strand BOB 42,293
Weights are calculated at linear density under standard preload (200d2 ) plus 4%.
70-05
MODEL 90 M 120 M
Mandal Forerunner
Circ. inches 6-9 9 - 11
Fairlead Shackle A (mm) 255 310
B (mm) 97 121
Stainless steel mooring shackle C (mm) 120 130
with sleek shape designed to D (mm) 65 82
pass through fairleads. E (mm) 67 90
Sizes: F (mm) 100 128
90, 120 & 300 M/Tons. R (mm) 34 45
Breaking Load
M/Tons 90 120
Each shackle is individually proof Proof Load
tested under control by DnV. M/Tons 55 70
Safe Working
Note: Wire Rope in the sheave. Load M/Tons 30 40
Fiber Rope around the body. 7,8 kg 13,3 kg
Weight
(17.2 lbs.) (29 lbs.)
ROPE (ALL)
WIRE ROPE
HENRY STEWART COMPANY
601 Conestoga Road, Villanova, PA 19085
LASHING WIRE & GEAR
CHAIN
CASAR WIRE Warehouse: 1121-29 North Delaware Ave., Philadelphia, PA 19125 FITTINGS & HARDWARE
SLINGS Philadelphia – Tel: 215-426-0600 • Fax: 215-425-6970 MARINE PAINT
Villanova – Tel: 610-687-1212 • Fax: 610-687-0912
SPLICING hstewartco@aol.com • www.henrystewartcompany.com WINCHES & HOISTS
0082-04 4/27/05 11:40 AM Page 1
71-05
ROPE FENDERS
Manila or Polypropylene (Specify when ordering)
No. 2414
BALL SHAPED
ROPE FENDER
Length--24”
Diameter--14”
Cylindrical
Rope
Fender
GANGWAY NETS
Mesh Openings: 4” x 4”
Mesh Rope: #120 Nylon Twine (1130 lb. TEST)
Border Rope: 5/8” Polypropylene
Lanyard Rope: 5/8” Polypropylene
Option: Safetyline Snap Hooks
ROPE (ALL)
WIRE ROPE
HENRY STEWART COMPANY
601 Conestoga Road, Villanova, PA 19085
LASHING WIRE & GEAR
CHAIN
CASAR WIRE Warehouse: 1121-29 North Delaware Ave., Philadelphia, PA 19125 FITTINGS & HARDWARE
SLINGS Philadelphia – Tel: 215-426-0600 • Fax: 215-425-6970 MARINE PAINT
Villanova – Tel: 610-687-1212 • Fax: 610-687-0912
SPLICING hstewartco@aol.com • www.henrystewartcompany.com WINCHES & HOISTS
72 - 04 4/27/05 11:41 AM Page 1
72-05
ENGLISH SIZES
FENDER STAND OFF STANDARD CAPACITY
FENDER
SIZE Diameter Energy Absorption Reaction Force
MODEL English Metric Uncompressed @ 60% Compression @ 60% Compression
Ft x Ft MxM Ft M Ft - Kips Ton-M Kips Tons
OC-3X6 3x6 0.92 x 1.83 4.1 1.2 37 5 61 28
OC-4X6 4x6 1.22 x 1.83 5.3 1.6 66 9 72 33
OC-4X8 4x8 1.22 x 2.44 5.3 1.6 88 12 107 49
OC-5X10 5 x 10 1.53 x 3.05 6.5 2.0 176 24 167 76
OC-5X16 5 x 16 1.53 x 4.88 6.5 2.0 306 42 291 132
OC-6X12 6 x 12 1.83 x 3.66 7.5 2.3 295 41 232 105
OC-7X14 7 x 14 2.13 x 4.27 8.5 2.6 477 66 322 146
• Thick nylon-filament-reinforced OC-8X12 8 x 12 2.44 x 3.66 9.8 3.0 520 72 206 93
polyurethane skin OC-8X16 8 x 16 2.44 x 4.88 9.8 3.0 718 99 406 184
• Nylon tire cord is applied in a OC-9X14 9 x 14 2.75 x 4.27 10.8 3.3 740 102 292 132
helix pattern during the coating OC-9X18 9 x 18 2.75 x 5.49 10.8 3.3 980 136 469 213
that embeds the filament into OC-10X16 10 x 16 3.05 x 4.88 11.8 3.6 1,048 145 478 217
the skin OC-10X20 10 x 20 3.05 x 6.10 11.8 3.6 1,377 190 635 288
OC-11X18 11 x 18 3.35 x 5.49 12.8 3.9 1,407 195 596 270
• Durable to all weather, forces
OC-11X22 11 x 22 3.35 x 6.71 12.8 3.9 1,814 251 769 349
and marine conditions
OC-12X24 12 x 24 3.70 x 7.30 13.8 4.2 2,336 323 944 428
• Heat-laminated, 100% closed-cell OC-13X26 13 x 26 3.96 x 7.90 14.8 4.5 2,916 403 1,094 496
foam core OC-14X28 14 x 28 4.27 x 8.53 15.8 4.8 3,594 497 1,255 569
• Uses no adhesives, which can
decompose over time
METRIC SIZES
FENDER STAND OFF STANDARD CAPACITY
FENDER
SIZE Diameter Energy Absorption Reaction Force
MODEL
Metric English Uncompressed @ 60% Compression @ 60% Compression
MxM Ft x Ft Ft M Ft - Kips Ton - M Kips Tons
OCM-1X1.5 1.00 x 1.50 3.3 x 4.9 4.4 1.3 35 5 50 23
OCM-1X2 1.00 x 2.00 3.3 x 6.6 4.4 1.3 50 7 74 34
OCM-1.2X2 1.20 x 2.00 3.9 x 6.6 5.3 1.6 67 9 81 37
OCM-1.3X2.5 1.35 x 2.50 4.4 x 8.2 5.9 1.8 109 15 117 53
OCM-1.5X3 1.50 x 3.00 4.9 x 9.8 6.4 2.0 162 22 162 73
OCM-1.7X3 1.70 x 3.00 5.6 x 9.8 7.1 2.2 203 28 173 78
OCM-2X3.5 2.00 x 3.50 6.6 x 11.5 8.1 2.5 326 45 246 112
OCM-2X4 2.00 x 4.00 6.6 x 13.1 8.1 2.5 383 53 259 117
OCM-2.2X4.5 2.20 x 4.50 7.2 x 14.8 8.7 2.7 518 72 354 161
OCM-2.5X4 2.50 x 4.00 8.2 x 13.1 10.0 3.0 579 80 336 152
OCM-2.5X5.5 2.50 x 5.50 8.2 x 18.0 10.0 3.0 867 120 502 228
OCM-3X6 3.00 x 6.00 9.8 x 19.7 11.6 3.5 1,283 177 645 293
OCM-3.3X4.5 3.30 x 4.50 10.8 x 14.8 12.6 3.8 1,049 145 475 215
OCM-3.3X6.5 3.30 x 6.50 10.8 x 21.3 12.6 3.8 1,676 232 749 340
OCM-3.3X10.6 3.30 x 10.6 10.8 x 34.8 12.6 3.8 2,862 396 1,300 590
OCM-4.2X8.4 4.20 x 8.40 13.8 x 27.6 15.6 4.8 3,461 479 1,208 548
*Actual values for above sizes may vary +/- 15% due to variations in materials, speed of compression, temperatures and tolerances.
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
Marine Fenders International, Inc. Exclusive U.S. Distributors:
ANCHOR MARINE & INDUSTRIAL SUPPLY
909 Mahar Avenue, Wilmington, CA 90744 Toll Free: 800-233-8014
Tel: 310-834-7037 • Fax: 310-834-7825 WATERMAN SUPPLY CO., INC.
E-mail: jerry.thermos@mpowercom.net • www.marinefendersintl.com Toll Free: (800) 322-3131
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
0073-04 5/9/05 10:49 AM Page 1
73-05
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
Marine Fenders International, Inc. Exclusive U.S. Distributors:
ANCHOR MARINE & INDUSTRIAL SUPPLY
909 Mahar Avenue, Wilmington, CA 90744 Toll Free: 800-233-8014
Tel: 310-834-7037 • Fax: 310-834-7825 WATERMAN SUPPLY CO., INC.
E-mail: jerry.thermos@mpowercom.net • www.marinefendersintl.com Toll Free: (800) 322-3131
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
74 - 04 4/27/05 11:44 AM Page 1
74-05
Fender performance is engineered at 60% foam compression. The monopile deflection provides
additional energy absorption for the same reaction force rating.
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
Marine Fenders International, Inc. Exclusive U.S. Distributors:
ANCHOR MARINE & INDUSTRIAL SUPPLY
909 Mahar Avenue, Wilmington, CA 90744 Toll Free: 800-233-8014
Tel: 310-834-7037 • Fax: 310-834-7825 WATERMAN SUPPLY CO., INC.
E-mail: jerry.thermos@mpowercom.net • www.marinefendersintl.com Toll Free: (800) 322-3131
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
0076-03 5/9/05 10:51 AM Page 1
75-05
UNIVERSAL BUOYS
General-purpose marine buoys engineered to accommodate a variety of
interchangeable end-fitting options such as:
• Bail Eye • Swivel Eye • Clevis Eye • Mooring Tee
CONSTRUCTION FEATURES:
• Central steel strength member
• Heat-laminated, closed-cell rigid urethane flotation foam
• Abrasion-resistant filament nylon-reinforced urethane skin
• Non-marking
• Puncture resistant
• Unsinkable
• Corrosion resistant
BUOY Net Buoyancy (Min) Buoy Weight Body Diameter Body Height Overall Height
MODEL LBS KG LBS KG FT M FT M FT M
UB-1500 1,500 680 710 322 4.2 1.3 2.5 0.8 4.3 1.3
UB-2000 2,000 907 801 363 4.2 1.3 3.3 1.0 5.5 1.7
UB-2500 2,500 1,134 689 313 5.0 1.5 2.9 0.9 5.0 1.5
UB-3000 3,000 1,361 929 421 5.0 1.5 3.3 1.0 5.5 1.7
UB-4000 4,000 1,814 1,488 675 6.0 1.8 3.3 1.0 5.5 1.7
UB-5000 5,000 2,268 1,570 712 6.0 1.8 3.8 1.1 6.0 1.8
*Actual values for above sizes may vary +/- 15% due to variations in materials, temperatures and tolerances.
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
Marine Fenders International, Inc. Exclusive U.S. Distributors:
ANCHOR MARINE & INDUSTRIAL SUPPLY
909 Mahar Avenue, Wilmington, CA 90744 Toll Free: 800-233-8014
Tel: 310-834-7037 • Fax: 310-834-7825 WATERMAN SUPPLY CO., INC.
E-mail: jerry.thermos@mpowercom.net • www.marinefendersintl.com Toll Free: (800) 322-3131
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
0077-04 4/27/05 11:46 AM Page 1
76-05
PENDANT BUOYS
BUOY BUOYANCY BUOY DIAMETER BUOY HEIGHT WORKING
MODEL NET WEIGHT OVERALL LENGTH OVERALL LOAD
Lbs Kg Lbs Kg Ft M Ft M Ft M Lbs Tons
PB-25 5,511 2,500 1,223 555 4.5 1.4 6.8 2.1 7.3 2.2 150,000 68
PB-50 11,023 5,000 2,123 963 6.0 1.8 7.2 2.2 8.7 2.7 150,000 68
PB-75 16,534 7,500 3,184 1,444 6.5 2.0 9.2 2.8 9.2 2.8 150,000 68
PB-100 22,046 10,000 4,197 1,904 7.0 2.1 11.0 3.4 9.9 3.0 150,000 68
PB-150 33,069 15,000 5,351 2,427 8.0 2.4 12.0 3.7 10.9 3.3 150,000 68
PB-200 44,092 20,000 7,152 3,244 8.6 2.6 13.6 4.1 11.5 3.5 200,000 91
PB-250 55,115 25,000 9,312 4,224 9.4 2.9 13.7 4.2 12.3 3.7 200,000 91
PB-300 66,138 30,000 11,175 5,069 10.0 3.0 14.5 4.4 12.9 3.9 200,000 91
PB-350 77,160 35,000 13,037 5,914 10.3 3.1 16.0 4.9 13.3 4.1 250,000 114
PB-400 88,183 40,000 14,899 6,758 10.4 3.2 18.0 5.5 13.4 4.1 250,000 114
MODULAR ANCHOR PENDANT BUOYS
BUOY BUOYANCY NUMBER DIAMETER THROUGH
MODEL NET OF OVERALL PIPE DIAMETER
LBS KG MODULES FT M IN MM
MAPB2-4 8,818 4,000 2 6.6 2.0 6.0 152
MAPB4-8 17,637 8,000 4 6.6 2.0 6.0 152
MAPB2-8 17,637 8,000 2 7.5 2.3 6.0 152
MAPB4-16 35,273 16,000 4 7.5 2.3 6.0 152
MAPB2-11 24,250 11,000 2 9.8 3.0 8.0 203
MAPB4-22 48,501 22,000 4 9.8 3.0 8.0 203
MAPB2-17 37,478 17,000 2 10.5 3.2 10.0 254
MAPB4-34 74,956 34,000 4 10.5 3.2 10.0 254
MAPB2-23 50,705 23,000 2 10.5 3.2 10.0 254
MAPB4-46 101,411 46,000 4 10.5 3.2 10.0 254
*Actual values for above sizes may vary +/- 15% due to variations in materials, temperatures and tolerances.
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
Marine Fenders International, Inc. Exclusive U.S. Distributors:
ANCHOR MARINE & INDUSTRIAL SUPPLY
909 Mahar Avenue, Wilmington, CA 90744 Toll Free: 800-233-8014
Tel: 310-834-7037 • Fax: 310-834-7825 WATERMAN SUPPLY CO., INC.
E-mail: jerry.thermos@mpowercom.net • www.marinefendersintl.com Toll Free: (800) 322-3131
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
0078-04 4/27/05 11:46 AM Page 1
77-05
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
Marine Fenders International, Inc. Exclusive U.S. Distributors:
ANCHOR MARINE & INDUSTRIAL SUPPLY
909 Mahar Avenue, Wilmington, CA 90744 Toll Free: 800-233-8014
Tel: 310-834-7037 • Fax: 310-834-7825 WATERMAN SUPPLY CO., INC.
E-mail: jerry.thermos@mpowercom.net • www.marinefendersintl.com Toll Free: (800) 322-3131
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
0079-03 4/27/05 11:47 AM Page 1
78-05
OCEANOGRAPHIC BUOYS
BUOY BUOYANCY FLOTATION TOTAL DIAMETER DIAMETER HEIGHT TOWER
MODEL NET WEIGHT WEIGHT OVERALL INTERNAL FLOTATION HEIGHT
Lbs Kg Lbs Kg Lbs Kg Ft M Ft M Ft M Ft M
OG-10 2,205 1,000 60 27 513 233 5.4 1.6 2.2 0.7 2.3 0.7 5.6 1.7
OG-15 3,307 1,500 72 33 606 275 6.1 1.9 2.3 0.7 2.4 0.7 5.6 1.7
OG-20 4,409 2,000 99 45 752 341 6.5 2.0 2.5 0.8 2.6 0.8 6.1 1.9
ATLAS-3 5,000 2,268 130 59 1,200 544 7.4 2.3 3.2 1.0 3.2 1.0 7.0 2.1
Actual values for above sizes may vary +/- 15% due to variations in materials, temperatures and tolerances.
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
Marine Fenders International, Inc. Exclusive U.S. Distributors:
ANCHOR MARINE & INDUSTRIAL SUPPLY
909 Mahar Avenue, Wilmington, CA 90744 Toll Free: 800-233-8014
Tel: 310-834-7037 • Fax: 310-834-7825 WATERMAN SUPPLY CO., INC.
E-mail: jerry.thermos@mpowercom.net • www.marinefendersintl.com Toll Free: (800) 322-3131
• Marine Fenders • Buoys • Flotation Foams • Security Barriers • Elastomer Materials • Marine Hardware
0080-03 4/27/05 11:47 AM Page 1
79-05
PNEUMATIC FENDERS
The pneumatic fenders have drum-like shapes and are built like tires. They have four plies
of high strength nylon tire cord coated with neoprene and each unit is molded into one piece. All
fenders have a ring at each end for the attachment of handling and securing lines. Swivels at both
ends permit the fenders to rotate freely. Each pneumatic fender has an automobile-tire type of
inflation fitting installed in one end.
The 40" x 60" pneumatic fender weighs 325 pounds. It is suitable for use on most freigh-
ters and on larger tanker ships.
The 24" x 48" pneumatic fender, which weighs 110 pounds, is designed primarily for use on
smaller vessels. It can also be used to supplement the larger fenders.
Little maintenance is required for pneumatic fenders. It is important that the pressure be
checked at least once a month. This can be done with a combination inflation gauge connected to
the low-pressure air system of the ship. Punctures can be repaired by vulcanizing or by using
plugs similar to those used for making repairs to tubeless-type automobile tires.
Two or more fenders are used on each side of a ship. When a ship is coming alongside
another ship or dock, the fenders are suspended vertically. The line at the lower end of each
fender is left loose. After the ship's lines are secured, this loose line is used to pull the fender to a
horizontal position. In severe weather additional fenders should be put in use. No special rigging
is required to handle these lightweight pneumatic fenders.
80-05
These barriers are designed to prevent launches and other small boats, potentially laden with
explosives, from getting near vessels in port. Interconnected by their end fittings, these barriers may
encircle a ship or block an entrance to a wharf from smaller watercraft. The barriers are
transportable for temporary or permanent deployment.
• Heavy duty integral swivel end fittings • Fender end-pull safe working load 34 kips
internally connected with a stud link chain • Towable
• Standard color black • No maintenance urethane skin
Urethane Products Corporation Coast Marine & Industrial Oceans West Marine J.C. MacElroy, Inc. See our fenders in the
9076 Rosecrans Avenue Supply Inc. (COMAR) & Industrial Supply Inc. 91 Ethel Road West Advertising Section
Bellflower, CA 90706 398 Jefferson St. 2886 Main Street P.O. Box 850
Toll Free: (888) 200-9797 San Francisco, CA 94133 San Diego, CA 92113 Piscataway, NJ 08855-0850
Tel: (562) 630-4982 • Fax: (562) 630-6974 Toll Free: (800) 433-8050 Tel: (619) 544-1900 Tel: (732) 572-7100
E-mail: info@urethaneproducts.com Tel: (415) 673-1923 Fax: (619) 696-0646 Fax: (732) 572-7112
www.urethaneproducts.com Fax: (415) 673-1927 E-mail: owest1900@aol.com
0081-04 4/27/05 11:49 AM Page 1
81-05
82-05
DIAMETER
12’ 12’-6” 13’ 13’-6” 14’ 14’-6” 15’ 15’-6” 16’ 16’-6” 17’ 17’-6” 18’ 18-6”
10’ 797 852 906 961 1018 1069 1123 1180 1235 1289 1342 1396 1442 1496
10’-6” 853 913 973 1032 1095 1151 1211 1274 1335 1396 1456 1516 1569 1631
11’ 910 975 1039 1104 1171 1234 1300 1368 1436 1503 1569 1636 1696 1765
11’-6” 966 1036 1105 1176 1248 1316 1388 1463 1536 1609 1683 1757 1824 1900
12’ 1023 1097 1172 1247 1325 1399 1476 1557 1637 1716 1796 1877 1951 2034
12’-6” 1079 1159 1238 1319 1402 1481 1565 1652 1737 1823 1910 1997 2078 2168
13’ 1136 1220 1304 1390 1479 1564 1653 1746 1838 1930 2023 2117 2205 2303
13’-6” 1192 1282 1371 1462 1556 1647 1741 1840 1938 2037 2137 2238 2333 2437
14’ 1249 1343 1437 1533 1633 1729 1830 1935 2039 2144 2250 2358 2460 2572
14’-6” 1306 1404 1503 1605 1710 1812 1918 2029 2139 2251 2364 2478 2587 2706
15’ 1362 1466 1570 1677 1787 1894 2006 2123 2240 2358 2477 2598 2714 2840
15’-6” 1419 1527 1636 1748 1864 1977 2095 2218 2340 2465 2591 2719 2842 2975
16’ 1475 1588 1703 1820 1941 2059 2183 2312 2441 2572 2704 2839 2969 3109
16’-6” 1532 1650 1769 1891 2018 2142 2272 2406 2541 2679 2818 2959 3096 3244
17’ 1588 1711 1835 1963 2095 2225 2360 2501 2642 2785 2931 3079 3223 3378
17’-6” 1645 1772 1902 2034 2172 2307 2448 2595 2743 2892 3045 3200 3351 3512
18’ 1701 1834 1968 2106 2249 2390 2537 2689 2843 2999 3158 3320 3478 3647
18’-6” 1758 1895 2034 2178 2326 2472 2625 2784 2944 3106 3272 3440 3605 3781
83-05
DIAMETER
12’ 12’-6” 13’ 13’-6” 14’ 14’-6” 15’ 15’-6” 16’ 16’-6” 17’ 17’-6” 18’ 18’-6”
11’-6” 775 814 850 884 916 943 968 992 1012 -- -- -- -- --
12’ 831 875 916 955 993 1026 1057 1087 1112 1135 -- -- -- --
12’-6” 888 936 982 1027 1070 1108 1145 1181 1213 1242 1265 -- -- --
13’ 944 998 1049 1098 1147 1191 1233 1275 1314 1348 1379 1407 1428 --
13’-6” 1001 1059 1115 1170 1224 1273 1322 1370 1414 1455 1492 1527 1555 1584
14’ 1057 1121 1181 1242 1301 1356 1410 1464 1515 1562 1606 1648 1682 1718
14’-6” 1114 1182 1248 1313 1378 1438 1498 1558 1615 1669 1719 1768 1809 1852
15’ 1171 1243 1314 1385 1455 1521 1587 1653 1716 1776 1833 1888 1937 1987
15’-6” 1227 1305 1381 1456 1532 1603 1675 1747 1816 1883 1946 2008 2064 2121
16’ 1284 1366 1447 1528 1609 1686 1764 1841 1917 1990 2060 2129 2191 2256
16’-6” 1340 1427 1513 1599 1686 1769 1852 1936 2017 2097 2173 2249 2318 2390
17’ 1397 1489 1580 1671 1763 1851 1940 2030 2118 2204 2287 2369 2445 2524
17’-6” 1453 1550 1646 1743 1840 1934 2029 2124 2218 2311 2400 2489 2573 2659
18’ 1510 1611 1712 1814 1917 2016 2117 2219 2319 2418 2514 2610 2700 2793
18’-6” 1566 1673 1779 1886 1994 2099 2205 2313 2419 2524 2627 2730 2827 2928
?? ?
Having trouble finding THE PRODUCTS
84-05
WELD-ON BUMPERS
Part No. A B C D E Wt.
Units Inches Lbs.
E47950 6 3 4-1/4 2-1/4 1/4 34
E47951 6 3 4-1/4 2-1/2 1/2 54
E47952 6 3 4-1/4 2-3/4 3/4 73
E47960 8 5 6-1/4 2-1/4 1/4 50
Part No. A Wt.
E47961 8 5 6-1/4 2-1/2 1/2 75 Units Inches Lbs.
E47962 8 5 6-1/4 2-3/4 3/4 99 E44311 2 168
E47970 10 7 8-1/4 2-1/4 1/4 65 E44300 4 133
E47971 10 7 8-1/4 2-1/2 1/2 96
E47972 10 7 8-1/4 2-3/4 3/4 127
?? ?
Having trouble finding THE PRODUCTS
85-05
EXTRUDED FENDERS
Cylindrical Square
Part No. O.D. I.D. Wt. /Ft. R/E Part No. A Bore Wt./Ft. R/E
Units Inches Inches Lbs. Kip/Ft. Kip Units Inches Inches Lbs. Kip/Ft. Kip
F3-0000 3 1.5 3 14 F6-0000 4.5 1.5 4.5 20
F3-8000 5 2.5 7 10 F6-2000 6 2 17 16
F3-9000 6 2 14 11 F5-6000 7 2.5 22.5 12.5
F3-1000 8 4 18.5 10 F5-0000 8 3 29.5 10
F3-2000 10 5 30 6.2 F5-7000 10 4 45 8.5
F3-5000 12 6 42.5 5.3 F5-1000 12 5 63 7
F3-6000 15 7.5 68.5 3.5 F5-2000 14 6 81 3.7
F3-3000 18 9 97.5 2.9 G6-2000 16 7 112 2.5
Cylindrical Wing
Part No. A Bore C D E Wt./Ft. R/E
Units Inches Lbs. Kip/Ft. Kip
F7-0000 3 1 6 .75 1.5 4.3 25
F7-8000 4 2 7.5 1.0 2.25 10 19.5 Slope Side “D” Shape
F7-1000 6 3 9 1.5 3 15.5 13.5 Part No. A B C D E F Wt./Ft. R/E
F8-1000 8 4 12 2.0 4 30 11 Units Inches Lbs. Kip/Ft. Kip
F8-4000 10 5 15 2.5 5 44 9 F9-4000 3.75 2.25 4.50 .75 2 1.50 4.5 16.7
F7-3000 12 6 18 3.0 6 58.5 6.3 F9-1000 6 3 6.75 1.25 2.87 2.37 12.3 13.3
?? ?
Having trouble finding THE PRODUCTS
86-05
87-05
88-05
89-05
Please Note: Work load limits include both paths for one complete sling, and are based on a straight pin diameter one-half the sling width.
Aluminum fittings should never be used where exposure to sprays, mists, vapors, fumes or liquids of acids, alkalis or other corrosive agents are present. While aluminum fittings are
non-sparking and do not rust, they are not as durable and cost more than steel hardware. Aluminum fittings are degraded by salt water. Steel fittings are automatically supplied on
two and four ply thickness slings. Exposure to acids, alkalis or other corrosive agents must be evaluated prior to use.
ALUMINUM
2" ABH1-902 3200 6400 2.26 .112 2" ACH1-902 2500 3200 6400 2.66 .112
3" ABH1-603 3600 7200 3.50 .140 3" ACH1-603 2700 3600 7200 4.00 .140
3" ABH1-903 4800 9600 4.05 .180 3" ACH1-903 3800 4800 9600 4.55 .180
4" ABH1-604 4800 9600 4.78 .172 4" ACH1-604 3800 4800 9600 5.48 .172
4" ABH1-904 6400 12800 5.50 .220 4" ACH1-904 5000 6400 12800 6.20 .220
6" ABH1-606 7200 14400 8.76 .243 6" ACH1-606 5700 7200 14400 10.91 .243
6" ABH1-906 9600 19200 9.85 .324 6" ACH1-906 7600 9600 19200 12.00 .324
2" SBH1-602 2400 4800 3.40 .080 2" SCH1-602 1900 2400 4800 4.20 .080
2" SBH1-902 3200 6400 3.62 .112 2" SCH1-902 2500 3200 6400 4.42 .112
2" SBH2-602 4800 9600 3.76 .160 2" SCH2-602 3800 4800 9600 4.56 .160
2" SBH2-902 6400 12800 4.46 .220 2" SCH2-902 5000 6400 12800 5.26 .220
2" SBH4-602 8860 17720 6.60 .320 2" SCH4-602 7000 8860 17720 8.10 .320
2" SBH4-902 11400 22800 8.26 .440 2" SCH4-902 9000 11400 22800 9.76 .440
3" SBH1-603 3600 7200 5.30 .140 3" SCH1-603 2700 3600 7200 6.60 .140
3" SBH1-903 4800 9600 5.85 .180 3" SCH1-903 3800 4800 9600 7.15 .180
3" SBH2-603 6600 13200 6.29 .280 3" SCH2-603 5300 6600 13200 7.59 .280
3" SBH2-903 8860 17720 7.14 .350 3" SCH2-903 7000 8860 17720 8.44 .350
3" SBH4-603 11400 22800 11.92 .560 3" SCH4-603 9000 11400 22800 14.92 .560
3" SBH4-903 17000 34000 13.36 .700 3" SCH4-903 13000 17000 34000 16.36 .700
4" SBH1-604 4800 9600 7.38 .170 4" SCH1-604 3800 4800 9600 9.38 .170
4" SBH1-904 6400 12800 8.10 .220 4" SCH1-904 5000 6400 12800 10.10 .220
4" SBH2-604 8860 17720 8.46 .340 4" SCH2-604 7000 8860 17720 10.46 .340
STEEL
4" SBH2-904 11400 22800 9.64 .440 4" SCH2-904 9000 11400 22800 11.64 .440
4" SBH4-604 15000 30000 15.20 .690 4" SCH4-604 12000 15000 30000 19.20 .690
4" SBH4-904 22800 45600 17.18 .880 4" SCH4-904 18000 22800 45600 21.18 .880
5" SBH1-905 8000 16000 10.43 .268 5" SCH1-905 6000 8000 16000 13.23 .268
5" SBH2-905 14250 28500 12.30 .540 5" SCH2-905 11400 14250 28500 15.10 .540
6" SBH1-606 7200 14400 11.74 .243 6" SCH1-606 5700 7200 14400 15.14 .243
6" SBH1-906 9600 19200 12.75 .324 6" SCH1-906 7600 9600 19200 16.15 .324
6" SBH2-606 12240 24480 12.98 .490 6" SCH2-606 9700 12240 24480 16.38 .490
6" SBH2-906 17000 34000 14.40 .650 6" SCH2-906 13000 17000 34000 17.80 .650
6" SBH4-606 22800 45600 31.62 .970 6" SCH4-606 18000 22800 45600 38.62 .970
6" SBH4-906 34000 68000 33.66 1.300
DO 6" SCH4-906 27000 34000 68000 40.66 1.300
8" SBH1-908 12800 25600 31.11 .448 NOT 8" SCH1-908 10250 12800 25600 46.86 .448
8" SBH2-908 22800 45600 33.51 .900 EXCEED 8" SCH2-908 18000 22800 45600 49.26 .900
8" SBH4-908 40000 80000 51.68 1.790 WORK 8" SCH4-908 32000 40000 80000 67.68 1.790
10" SBH1-910 15000 30000 39.71 .586 10" SCH1-910 12000 15000 30000 53.61 .586
10" SBH2-910 24000 48000 42.06 1.170 LOAD 10" SCH2-910 19000 24000 48000 55.96 1.170
12" SBH1-912 19000 38000 45.64 .720 LIMITS 12" SCH1-912 15000 19000 38000 66.44 .720
12" SBH2-912 30000 60000 48.64 1.440 12" SCH2-912 24000 30000 60000 69.44 1.440
n Available in either nylon or polyester webbing n For polyester webbing add the letter “P” to the Stock No. (Example: SCH2-904P)
n Polyester webbing is available in the (9) heavy web class only n USER MUST SPECIFY SLING LENGTH
TRIANGLES Dimensions & Data CHOKERS Dimensions & Data
Approx. Approx.
Size * A B C D E F G Wt. (Lbs.) Size * A B C D E F G Wt. (Lbs.)
AT2 4 3-5/8 2-1/4 1-3/4 15/16 2-3/8 9/16 .32 AC2 6-1/8 5-1/4 2-1/8 1-3/4 15/16 2-3/8 9/16 .75
AT3 5-1/4 5 3-1/4 2 1-3/16 3-5/16 5/8 .75 AC3 7-1/2 7-1/8 3-1/8 2 1-1/8 3-5/16 5/8 1.20
AT4 6-1/4 6-5/8 4-3/8 2-3/8 1-7/16 4 11/16 1.20 AC4 8-3/4 8-3/4 4-1/8 2-3/8 1-7/16 4 11/16 1.80
AT6 8-5/16 8-7/8 6-3/8 3-1/8 1-3/4 5-1/2 15/16 2.50 AC6 11-5/16 11-3/4 6-1/8 3-1/8 1-3/4 5-1/2 15/16 5.10
ST2 4-1/8 4-1/8 2-1/4 1-3/4 15/16 2-7/16 1/2 1.0 SC2 6-3/16 5-1/4 2-1/16 2 13/16 2-3/8 1/2 1.8
ST3 5-5/16 5-1/8 3-1/32 2 1-3/16 3-3/8 1/2 1.6 SC3 7-3/4 7 3-1/16 2 1-1/8 3-3/8 1/2 2.9
ST4 6-1/2 6-3/4 4-1/2 2 1-5/8 4-1/16 1/2 2.4 SC4 8-15/16 8-7/8 4-1/8 2-1/2 1-7/16 4-1/8 1/2 4.4
ST5 7-7/16 8-1/16 5-9/16 2-1/2 1-15/32 5-1/32 1/2 3.2 SC5 10-1/8 10-7/16 5-1/8 2-3/4 1-5/8 4-11/16 1/2 6.0
ST6 8-9/16 8-5/8 6-1/4 2-3/4 1-11/16 5-3/4 1/2 4.2 SC6 11-1/2 11-15/16 6-1/8 2-7/8 1-3/4 5-7/16 1/2 7.6
ST8 10-7/8 11 8-1/8 3-5/8 1-13/16 7-1/2 3/4 6.4 SC8 14-1/8 15-3/4 8-1/8 5 2-3/8 7-1/4 3/4 15.0
ST10 12-7/8 13-3/8 10-1/4 4-7/8 2-11/16 8-11/16 3/4 13.9 SC10 17 17-3/4 10-1/8 5-1/8 3-1/2 8-3/8 3/4 27.8
ST12 13-3/4 16 12-1/4 5-1/8 3-5/8 8-3/8 3/4 18.2 SC12 19-3/8 22-13/16 12-1/8 5-1/2 4-1/4 9-15/16 3/4 39.0
* “AT” prefix indicates Aluminum Triangles, “ST” prefix indicates Steel Triangles * “AC” prefix indicates Aluminum Chokers, “SC” prefix indicates Steel Chokers
91-05
CHAFFING GEAR
n Chaffing Gear protects expensive mooring and tow lines from cutting and abrasion.
n Easy to install and remove at any time, these pads work equally as well with chain,
wire rope, or chain assemblies to protect the load and the sling.
n Chaffing gear is available in any width and length. It may be ordered in a single long
length for on-site cutting and installation of various lengths as required.
n Available in two different designs:
YOU MUST SPECIFY: 1. Design Type: “A” Grommets, “B” Hook & Loop Tape 2. Width x Length
92-05
Specifications
Stock No. WN 5000 WN 17000 WN 30000
W.L.L.* (Lbs.) 10,000 34,000 60,000
Masterlink (Diameter) 1-1/4" 1-1/2" 1-3/4"
Body Width “B” 36" 48" 66"
Overall Length “A” 184" 212" 294"
Tail Length “D” 44" 46" 81"
Pad Length “H” 48" 48" 54"
Gap Distance “G” — 24" 24"
“L” (Loop) Net
Configuration Body O.A.L. “C” 96" 120" 132"
*Work load limit (W.L.L.) is based on a pair of nets with one net capable of lifting
up to 75% of the load while maintaining a design factor of 5 to 1.
Vertical Vertical
Rope Adjustment Work Load Stock Rope Adjustment Work Load Stock
Diameter Range Limit (Lbs.) Number Diameter Range Limit (Lbs.) Number
3/8" 20" – 36" 1000 ATS-S-382036 5/8" 60" – 84" 9600 ATS-Q-586084
3/8" 20" – 48" 1000 ATS-S-382048 3/4" 60" – 84" 12650 ATS-Q-346084
1/2" 27" – 48" 2000 ATS-S-122748 7/8" 72" – 96" 18700 ATS-Q-787296
1/2" 27" – 60" 2000 ATS-S-122760
5/8" 32" – 48" 3000 ATS-S-583248
5/8" 32" – 60" 3000 ATS-S-583260
93-05
94-05
95-05
96-05
Features
MASTER
CONTROL • Grade 80 Alloy Chain
LINK • Alloy Steel Master Control Link
THREE • Each assembly serialized for
ADJUSTING traceability
SLOTS SINGLE
POINT
• Complies with OSHA – proof tested
PICK UP and certified
BASKET
HITCH
LOAD
BALANCED
MASTER
CONTROL
SLING
LINK
SERIAL
NUMBER
CAPACITY
RATING
Sling capacity rating decreases as the angle from horizontal decreases. We do not recommend using at angles of less
than 45°. Loads must always be securely attached and balanced. You must never substitute another chain or exceed
the load limit. The load bearing chain must be seated at the base of adjusting slot of the Master Control link. The alloy
chain and master control link shall not be used separately for general purpose lifting. Do not exceed rated capabilities.
97-05
BRAIDED ROUNDSLINGS
CAPACITIES IN LBS. APPROXIMATE WEIGHTS AND DIMENSIONS
Vertical Choker Basket
(L) (EL)
Min. Weight Std. Eye Body Under Load—In.
Code Color Ft. Lb/Ft Length Width W Thickness
6 PART TUF-BRAID SLINGS
B6E30 Purple 6,700 5,300 13,400 4-1/2 .8 15" 3-1/4" 3/4"
B6E60 Green 13,500 10,800 27,000 5 1.2 15" 3-3/4" 1-1/8"
B6E90 Yellow 21,400 17,100 42,800 5-1/2 1.6 15" 4-1/4" 1-1/4"
B6E120 Tan 27,000 21,600 54,000 5-1/2 2.0 15" 4-1/2" 1-5/16"
B6E150 Red 33,600 26,800 67,200 6-1/2 2.7 20" 5-1/4" 1-3/4"
B6E180 White 42,800 34,200 85,600 7 3.2 20" 5-1/2" 2"
B6E240 Blue 54,000 43,200 108,000 9 4.4 20" 6-5/8" 2-1/4"
B6E360 Grey 79,000 63,200 158,000 9-1/2 6.5 30" 8-1/4" 2-1/2"
B6E600 Brown 135,100 108,000 270,200 10-1/2 9.7 30" 11" 2-3/4"
B6E800 Olive 168,300 134,600 336,600 13 12.0 30" 12" 4"
B6E1000 Black 229,500 183,600 459,000 14-1/2 15.6 31" 13-1/2" 4-1/2"
8 PART TUF-BRAID SLINGS
Code Color Vertical Choker Basket Min. L Wt/Ft. EL-In. W Thickness
B8E30 Purple 8,800 7,100 17,600 4-1/2 1.1 15" 3-1/2" 1"
B8E60 Green 18,000 14,400 36,000 5 1.5 15" 4" 1-3/8"
B8E90 Yellow 28,500 22,800 57,000 5-1/2 2.2 15" 4-3/4" 1-5/8"
B8E120 Tan 36,000 28,800 72,000 5-1/2 2.6 15" 5" 1-3/4"
B8E150 Red 44,900 35,900 89,800 6-1/2 3.6 20" 6" 2-1/8"
B8E180 White 57,100 45,600 114,200 7 4.1 20" 6-1/4" 2-1/2"
Multiple part B8E240 Blue 72,000 57,600 144,000 9 5.6 20" 7-1/2" 2-3/4"
B8E360 Grey 105,400 84,300 210,800 9-1/2 8.3 30" 9-1/2" 3-1/4"
construction
B8E600 Brown 180,200 144,100 360,400 10-1/2 12.0 30" 13" 3-3/4"
for redundant B8E800 Olive 224,400 179,500 448,800 13 16.0 30" 13-1/2" 4-1/2"
safety B8E1000 Black 306,000 244,000 612,000 14-1/2 20.0 31" 15-3/4" 5-1/4"
98-05
The products above and below this line are not available from the same manufacturing source.
To order, specify:
1) Net size
2) Mesh size
3) Rope diameter
4) Rope material
1) Polypropylene
2) Nylon
3) Manila
99-05
PEDLEY NETS
Other Other
(Stock)
12’ X Polypro 8” 5/8” 3/4” Forged ring each corner
Mariner’s
Cargo
(Custom) Wide Long Connecting configuration
Scramble Manila Forged ring each corner
Gangway Polypro Loop each corner
Tie-Down Polyester Tie off lanyard each corner
Heli-Pad Nylon
Climbing Steel
Other Other
(Stock) Polypro (Stock) Sizes The
Safety- 6” Mesh 10’ x 15’ and in Intersection
5’ increments
Fall Nylon up to 40’ x 50’
Protection 4” Mesh
Size Rated Mesh Edge Weight
(lbs) Line Line (lbs)
10’ 3000 5/16” 5/8” 16
(Stock)
12’ 3000 5/16” 3/8” 22
Cargo 12’ 5000 3/8” 3/4” 31
Helicopter
15’ 3000 5/16” 5/8” 34 US
Polypro Patents
15’ 5000 3/8” 3/4” 50
2817263
20’ 3000 5/16” 5/8” 60 3091834
20’ 5000 3/4” 3/4” 88 3091016
P. O. Box #7
4711 S. Hwy. 281
Mineral Wells, Texas 76067
Pedley Nets
Toll-Free: 888-806-0624
Inc. Nets cer
tifie
ANSI & d for:
OSHA
Tel. & Fax: (940) 328-0448 www.PedleyNets.net • e-mail: sales@PedleyNets.net
100-04 4/27/05 12:34 PM Page 100
100-05
MacGREGOR GROUP
HATCH COVER SPARE PARTS
END CLEAT 152 mm length SIDE CLEAT 210 mm length SCREW CLEAT 165 mm length
11.02 ASSEMBLY 11.03 ASSEMBLY
11.00 11.00
02 03
11.00
02
11.00
04
11.00
04
11.02 11.00
01 01
11.02 11.02
07 05 11.03
01 11.05
01
11.02
05 11.02
06 11.00
04
11.02.01 Bolt 152 mm length
11.00
11.02.05 Spindle 11.02 11.03
02
07 06
11.02.06 Eyeplate
11.02.07 Split Pin 11.03.01 Bolt 210 mm 11.02.07 Split Pin 11.05.01 Support Piece 11.00.03 Snug
11.00.02 Thumb Nut 11.03.06 Eyeplate 11.00.02 Thumb Nut 11.00.01 Bolt 165 mm 11.00.04 Washer
11.00.04 Washer 11.02.05 Spindle 11.00.04 Washer 11.00.02 Thumb Nut
FLUSH DECK CLEAT CROSS JOINT CLEAT JUNCTION PIECE Left hand piece
for normal single pull covers.
11.50 ASSEMBLY 12.01 ASSEMBLY
11.50
01 40.50 ASSEMBLY
11.50 11.50
09 08
11.50
05
11.50
03
11.50
07
12.00 12.00
02 05
11.50
02 11.50
06 12.00
01 40.50
02
11.50
04
12.00
04 40.50
04
11.50.01 Threaded Axle
11.50.02 Tongue 11.50.06 Guide Bolt
11.50.03 Base 11.50.07 Spring Washer
11.50.04 Support 11.50.08 Spring Pin 12.00.01 Wedge 12.00.04 Spring 40.50.02 Connecting Snug
11.50.05 Washer 11.50.09 Spring Pin 12.00.02 Saddle 12.00.05 Taper Pin 40.50.04 Guide Plate
LONG SHACKLE SHORT SHACKLE LONG SHACKLE SHORT SHACKLE
40.08
40.07 ASSEMBLY ASSEMBLY
ASSEMBLY 40.06
ASSEMBLY 40.05
40.06 40.07
01 01
40.05
01
40.05 40.07
02 40.08 40.07
40.05 02 01 02
02
For normal Single Pull and For normal Single Pull and
For normal Single Pull and For normal Single Pull and Magronest Covers above Magronest Covers above
Magronest Covers 2.5–4 tons weight. Magronest Covers 2.5–4 tons weight. 4 tons weight. 4 tons weight.
40.05.01 Shackle Bow 40.06.01 Shackle Bow 40.07.01 Shackle Bow 40.08.01 Shackle Bow
40.05.02 Shackle Pin 40.05.02 Shackle Pin 40.07.02 Shackle Pin 40.07.02 Shackle Pin
101-05
MacGREGOR GROUP
HATCH COVER SPARE PARTS
QUICK ACTING CLEAT QUICK ACTING CLEAT QUICK ACTING CLEAT For Rod 180 mm length
For Rod 315 mm length For Rod 405 mm length 13.02 ASSEMBLY
13.00 ASSEMBLY 13.00 13.00
13.01 ASSEMBLY 13.00 04
13.00 03 03
03 13.00
13.00 08
13.00 13.00 08
13.00 08 04
04
13.00
13.00 02
02 13.01
13.00 01
01
13.00 13.02
02 01
13.02
13.00 13.00 02
05 05
13.00
13.00 06
13.00.01 Rod 315 mm 07 13.00
13.00 07 13.00
13.00.02 Snug 06 06 13.02 13.00 13.00
13.00.03 Head 13.00 03 09 07
13.00
09
13.00.04 Hinge Pin 09
13.00.05 Crutch 13.01.01 Rod 405 mm 13.02.01 Rod 180 mm 13.00.04 Hinge Pin
13.00.06 Rubber Washer 13.00.02 Snug 13.00.06 Rubber Washer 13.02.02 Convex Washer 13.00.06 Rubber Washer
13.00.07 Steel Washer 13.00.03 Head 13.00.07 Steel Washer 13.02.03 Strap 13.00.07 Steel Washer
13.00.08 Spring Pin 13.00.04 Hinge Pin 13.00.08 Spring Pin 13.00.02 Snug 13.00.08 Spring Pin
13.00.09 Nylstop Nut 13.00.05 Crutch 13.00.09 Nylstop Nut 13.00.03 Head 13.00.09 Nylstop Nut
ECCENTRIC WHEEL
Manually Adjusted to Suit High or ECCENTRIC WHEEL
Low Position in Conjunction with Permanently Locked in Low Position
Jacking Operation
JACKING BLOCK
BALANCING ROLLER
BALANCING
ROLLER
JUNCTION PIECE
ASSEMBLY
JUNCTION PIECE
ECCENTRIC WHEEL ASSEMBLY
“Turning Lever” (Manual)
102-05
MacGREGOR GROUP
BALANCING ROLLERS
22.04 ASSEMBLY 22.05 ASSEMBLY 22.09 ASSEMBLY 22.10 ASSEMBLY
22.00 22.00
04 04 22.10 22.03 22.03
22.09 22.03 04
22.06 06 22.03 04 06 03
22.00 22.07 22.00
06 06 03
03 03
For normal Single Pull
For normal Single Pull and For normal Single Pull and For normal Single Pull and and Magronest Covers above
Magronest Covers 2.5-4 tons weight. Magronest Covers 2.5-4 tons weight. Magronest Covers above 4 tons weight. 4 tons weight.
22.06.06 Double Link Plate 22.07.06 Single Link Plate 22.09.06 Double Link Plate 22.10.06 Single Link Plate
22.00.01 Spindle 22.00.01 Spindle 22.03.01 Spindle 22.03.01 Spindle
22.00.03 Roller 22.00.03 Roller 22.03.03 Roller 22.03.03 Roller
22.00.04 Bush 22.00.04 Bush 22.03.04 Bush 22.03.04 Bush
22.00.05 Washer 22.00.05 Washer 22.03.05 Washer 22.03.05 Washer
22.00.10 Spring Pin 22.00.10 Spring Pin 22.03.10 Spring Pin 22.03.10 Spring Pin
20.00.09 Grease Nipple 20.00.09 Grease Nipple 20.00.09 Grease Nipple 20.00.09 Grease Nipple
ECCENTRIC WHEELS
ECCENTRIC WHEEL Small Model ECCENTRIC WHEEL for Wheel load 2 tons max.
20.00 ASSEMBLY 20.00 20.01 ASSEMBLY 20.00
01 01
20.00
05
20.00 20.00
04 04
20.00 20.00
06 06
ECCENTRIC WHEEL for Wheel load 5 tons max. ECCENTRIC WHEEL for Wheel load 5 tons max.
20.00 20.00
20.02 ASSEMBLY 01 20.03 ASSEMBLY 01
20.00
05
20.00
20.00 04
04
20.00
20.00 06
06
20.00
20.00 20.02 08 20.00 20.00 20.00 20.02
08 20.00 20.00 20.00 09 02
10 02 07 03
07 09
20.02.02 Rim 260 mm dia. 20.00.06 Bush 20.02.02 Rim 260 mm 20.00.07 Washer
20.00.01 Spindle 20.00.07 Washer 20.00.01 Spindle 20.00.08 Spring Pin
20.00.10 Eccentric Bush 20.00.08 Spring Pin 20.00.03 Eccentric Bush 20.00.09 Grease Nipple
20.00.04 Locking Pin 20.00.09 Grease Nipple 20.00.04 Locking Pin 40.09 C Chain (optional)
20.00.05 Bush 40.09 Chain (optional) 20.00.06 Bush
103-05
MacGREGOR GROUP
HATCH COVER SPARE PARTS
RUBBER PADS HATCH COVER DRIVING CHAIN
A ØD
Mk9
Mk8 (71 x 32mm)
5-1⁄2" x 2-3⁄4" x 1-1⁄2" Terminal Piece H
D A H WGHT
14mm 50mm 17mm 8.8 Lb/M
MM05 (Mk 1)
16mm 55mm 19mm 12 Lb/M
10.00.09
(71 x 32mm)
MM04A
18mm 64mm 21mm 21 Lb/M
Two-Way Joint
(71 x 32mm)
Three-Way Pad
WATERTIGHT GASKET
MGN10969 94X50
MM07A (Mk 2) MGN10967 71X40
(71 x 32mm) L/Hand MGN10972 71X32
Left or Right Hand Mk7 ZZ57 57X32
(71 x 32 mm)
90" “L” Shaped
38°
250mm
NCG 10185 92X50
NCG 10179 69X35
10.00.10
120°
(71 x 32mm)
End Piece
MM09
(94 x 50 mm)
Angle Joint
23° MM10
(94 x 50mm)
Flat End Joint
267mm
MM06 (Mk3)
(71 x 32mm) MGN10980 98X60
Terminal Piece
104-05
DIPLOMATIC MARINE
RAM-NEK (Premium)
GULF SEAL (Standard)
IMPORTANT: Proper care and maintenance of your rubber NOTE: Heavy-Duty Marine tape should not be stored at extremely cold or hot
packings and compression bars is still necessary. Heavy- temperatures. Store in warm area during cold weather, and cool area
Duty Hatch Cover Tape is not meant to replace the primary during hot weather.
sealing system of the hatch cover.
105-05
DIPLOMATIC MARINE
FLEXIBLE GASKET-TYPE
SEALANT
FOR COAMING JOINTS
For protection from water seepage
in difficult to tape areas around hatch
covers such as places where bolts, APPLICATION
chains, wheels, etc. make tape
application difficult • Remove all dust, dirt and rust from the coaming table
and make sure surface is dry.
• Apply 75mm wide cloth duct tape to the area where
USAGE Flexible Gasket-type Sealant will be placed
• Position coil, white side up, do not overlap! Place new
Flexible, Gasket-type Sealant coils are composed of coil flush against laid coil so there are no gaps.
an adhesive and equipped with a non-release film for • Close and secure hatch as usual. Flexible Gasket-
ease of application. type Sealant should “squeeze out” as the side plate
presses down (See illustration)
Coaming joints may be difficult to seal against water • Product can be easily removed by pulling up the cloth
seepage with the use of tape only. Even if properly duct tape with your hand. Residue can be removed
maintained, hatch cover leakage can occur – most often with any degreaser
in cross joints, less often in peripheral joints (See
illustration). Flexible Gasket-type Sealant coils were IMPORTANT: Proper care and maintenance of your rubber packings
designed to be positioned under the side plate of the and compression bars is still necessary. Heavy-Duty Hatch Cover Tape
hatch cover (the side closest to the coaming table) before is not meant to replace the primary sealing system of the hatch cover.
the hatch is closed. This product applies quickly and
easily and can more effectively seal the coaming joint.
PACKAGING
KOAMING-AIDE is packaged in COILS
THICKNESS/WIDTH LENGTH/CARTON COILS/CARTON WEIGHT/CARTON
10mm x 20mm 330 ft (100 meters) 10 60 lb (27 kilos)
20mm x 40mm 100 ft (30 meters) 6 80 lb (36 kilos)
NOTE: Read the instructions and diagrams before installing Flexible Gasket-Type Sealant. It is not meant to make coaming joints airtight.
106-05
107-05
RATED CAPACITIES IN TONS (2000 lbs.) 5 to 1 Design Factor From the Horizontal
EIP IWRC RRL PREFORMED WIRE ROPE
Rope Min.
Diameter Length W L Choker Vertical ▲ ▲ ▲
(in.) (SL) (in.) (in.) Hitch Hitch 60° Basket 45° Basket 30° Basket
(ft. - in.)
108-05
There are three different systems offered: Standard, Jumbo Internal Spray Jumbo Models
& Jumbo Internal Spray. All systems are provided with all (Light Oil Weight Applications, 90 weight oil & thinner)
accessories necessary to begin immediate operation. The Seal & Scraper Plate Kits for wire rope from
customer provides the air supply unit. 3/8” (9mm) to 2-1/4” (57/58mm)
JU5L – High Pressure Internal Spray System for use with sprayable
Standard System Models light viscosity coatings. Fit for 5-gallon pails.
For 1/4" (5mm) to 1-7/8" (48mm) wire rope / seal kit diameters
JU16L – High Pressure Internal Spray System for use with sprayable
SU35B – For low and high viscosity lubricants in 5-gallon
light viscosity coatings. Fit for 16-gallon kegs.
(35 lb./16 Kg) pails. 50:1 ratio pump package. Flow rate per
minute NLGI Grade 1 @ 70 psi = 72 ounces (2 Kgs). JU55L – High Pressure Internal Spray System for use with sprayable
U.S. Government / NATO NSN: 4930-01-424-2197. light viscosity coatings. Fit for 55-gallon kegs.
SU120 – Same operational specifications as the Model SU35B, Accessories
except that the pumping system is configured to fit 16-gallon
(120 lb./54 Kg) drums. U.S. Gov. / NATO: 4930-01-462-6338. GROOVE CLEANER KITS – Each kit is supplied with two individual
groove cleaners. Groove cleaners function to clean the groove pattern
SU400 – Same operational specifications as the Model SU35B & and outer circumference of the wire rope as it enters the lubrication
SU120, except that the pumping system is configured to fit collar, providing maximum penetration and coating levels in the
55-gallon (400 lb./181 Kg) drums. pressurized lubrication chamber. Customer must specify the diameter,
lay and number of outer strands of their rope when ordering.
Jumbo System Models
MANUAL STRIPPER – Acts as a rotational base for groovers separate
For 3/8" (9mm) to 3-7/8" (98mm) wire rope / seal kit diameters from the lubrication collar if required. Utilized when user would like to
(Do not choose a Jumbo System if you do not have a wire rope clean the wire rope for inspection purposes. Example: Inspection of
diameter larger than 1-7/8” (48mm). rope to determine if condition warrants replacement.
Note: If your preferred wire rope lubricant is a light weight oil product, we
recommend that you consider one of the internal spray systems for larger wire rope DYNAGARD BLUE – Environmentally friendly mineral oil-based
diameters. (See Internal Spray Models, second column.) lubricant. Available in 5, 16, and 55 gallon containers. Blended for
optimum coating and penetration when used with the above wire rope
JU5 – For medium to high viscosity wire rope lubricants supplied in lubrication systems. Approved by U.S. Coast Guard, U.S. Navy,
5-gallon (35 lb./16 Kg) pails. 50:1 ratio pump package: Flow rate Canadian Navy, U.S. Government / NATO: 9150-01-520-8116.
NLGI Grade 1 viscosity @ 80 psi = 18 lbs. (8 Kgs) per minute.
DYNAGARD "E" – Environmentally safe seed oil-based grease. 97%
JU120 – For medium to high viscosity lubricants supplied in biodegradable, with over 5,000 PPM LC-50 bio-aquatic performance test
16-gallon (120 lb./54 Kg) drums. 50:1 ratio pump package: Flow rate levels. Protective performance matches petroleum-based products.
NLGI Grade 1 viscosity @ 80 psi = 18 lbs. (8 Kgs) per minute. Blended for optimum coating and penetration levels when used with the
above wire rope lubrication systems. Approved by U.S. Coast Guard,
JU400 – For medium to high viscosity lubricants supplied in 55-gallon U.S. Navy, Canadian Navy. U.S. Government / NATO NSN:
(400 lb./181 kg) drums. 50:1 ratio pump package: Flow rate NLGI 9150-01-520-8143.
Grade 1 viscosity @ 80 psi = 18 lbs. (8 Kgs) per minute.
Manufactured by :
WIRE ROPE LUBRICATION SYSTEM The Kirkpatrick Group, Inc.
When you purchase our product, you are purchasing a system 1700 Alma Drive, Suite 330
with a proven track record supported by a data base of Plano, TX 75075 USA
information concerning wire rope maintenance accumulated over Tel: (800) 466-4414, (972) 509-2468
Fax: (972) 509-2554
the 16 years our company has been in operation. This type E-mail: TKG-Sales@dynagardblue.com
of product support comes only with experience! www.thekirkpatrickgroup.com
coopertools0109 5/9/05 10:52 AM Page 0109
109-05
CAMPBELL® CHAIN
NET-LINK CLOSER FOR CLOSING CHAIN LINKS
• Used on commercial fishing Approx. Capacity Replacement
boats and draggers for net Cat. Weight Length Link Diam. Cutter Head
No. ton kg (in.) (in.) Cat. No.
and mooring chains
1 3
• Designed to close heavy 0290MLC 7 ⁄ 2 3.4 30 ⁄8 0213LC
chain link
• Toggle joints turn 50 lbs. hand pressureto 4000 lbs. cutting pressure
• Screw-type adjustment realigns edges
110-05
111-05
POWER MEGAPHONES
Weatherproof Audio Hailer #S-168M
NSN 5830-01-073-5587
Uses 12 “C” Batteries
Hazardous Location Safe Hailer #S-245
BRASS BELLS U.L. listed - No. 808X
Plain or Polished PORTABLE MECHANICAL
Uses 12 “C” batteries FOGHORN – Rotary Type
Engraving available
(Please Specify Engraving) Portable Mechanical Foghorn as
Diameter Weight required by the U.S. Coast Guard.
(in.) (mm) (lbs.) Heavily constructed wooden box;
4 100 3 heavy brass horn and handle.
5 125 4 Produces a sound which can be
6 150 6 heard many miles away. Simple to
7 175 9 operate; always ready for use.
8 200 14 21-1/2” long, 8” wide, 14-3/4” high.
9 230 20
Weight: 23 lbs.
10 250 27
12 300 40
14 350 65
16 400 70 BRONZE MIL SPEC GONGS
18 460 123 BELL F-957
20 500 170 12” and 14” Cylindrical 18” x 18”
Navy Mil-Spec Bells available Weight: 30 lbs. Stainless Steel
upon request. and 39 lbs. Weight: 85 lbs.
SPLICING
VISES
PORTABLE
MECHANICAL FOGHORN
Plunger Type
Meets U.S.C.G. Specifications.
#1200 #900 Made of galvanized steel and painted
Bronze Frame & Jaws For use in forming strong slings. grey. Replacement reed included.
Steel Screws Meets Fed. Spec. #GGG-V-412A Overall Height: 23.6”
Wire Rope Capacity: 1/8” to 5/8” Wire Rope Capacity: 3/8” to 1-1/2” Diameter: 7-7/8”, Base: 9.8” x 9.8”
Rope Capacity: Up to 1” Manila Base Dimensions: 19-1/2” x 19-1/2” Weight: 13.5 lbs.
Base Dimensions: 8-1/2” x 11-1/2” Weight: 70 lbs.
Weight: 7-1/2 lbs.
112-05
Up to 164’ of 8” float diameter Compactible ReelPak™ are completely corrosion resistant, unsinkable, SELF-INFLATING,
Harbor Boom Systems fit in a barrel self-inflating and self-compacting, reelable boom systems E-Z FLO™
AIR VENTS
COMPARTMENTED SELF-COMPACTING
FLOAT SECTIONS OPERATION
that do not require pumps, valves, or blowers, etc. DOUBLE WALL
CONSTRUCTION
TANKS BALLAST-
TENSION
CONTINUOUS SS COIL
MAINTAINS CONSTANT 100% POLYURETHANE
COATED FABRIC
MEMBER FREEBOARD EVEN IF
Pillow tanks are horizontally flat, rectangular, BOOM IS DAMAGED
reinforced storage tanks, with fill/drain connections
8” Harbor to 32” High-seas float diameter
and handles/tie-downs where needed.
Reelable Boom Systems
Cap. - gal.(£) Overall Size (full) - ft. (m) Shipping Wt. - lbs. (kg)
100 (378) 3 x 4.5 x 1.5 (.9 x 1.4 x .5) 20 (9)
300 (1,134) 4x9x2 (1.2 x 2.7 x .6) 40 (18)
1,000 (3,780) 8 x 10 x 2 (2.4 x 3 x 6) 75 (34)
100 to 100,000 Gal. Capacity Pillow Tank 5,000 (18,900) 13.5 x 17.5 x 3.5 (4.1 x 5.3 x 1) 200 (91)
10,000 (37,800) 20 x 20 x 4 (6.1 x 6.1 x 1.2) 300 (136)
113-05
BATTERY CHARGERS
ACHG-12-4-AJ - High current line of dual-rate chargers. Units equipped with charge and
power on indicators. They are reverse polarity protected and have short circuit protection.
ACHG
Made in 120 or 220 VAC inputs.
VCM
VCM-12-LED - Vehicle Charging Rack. 12 or 120 volt. A steel enclosure with a magnet
which holds handlight in place for recharging. 120 volt model (VCM-120-LED) plated with
anti-rust coating. Used by U.S. Navy.
NAVIGATION LIGHTING
BGANCLT - Expendable anchor light designed for use on barges. Clear, steady light is
visible for more than one mile. Light has unbreakable lens and uses any 6 volt spring battery
(NEDA 908). Meets all U.S.C.G. Regulations.
BGANCLT BUNYBZ
BUNYBZ* - Multi-purpose waterproof light with locking bolt and high-impact shatterproof
lens. Uses one 6 volt battery (NEDA 908). Can be used with bulbs 1317 (high power - range
3 mi.) or 1850 (low power - range 1 mi.). Flash rates: 15, 30, or 60 flashes per minute. Red,
Green, or Blue filter; Clear or Amber lens. Specify filter and lens colors when ordering.
BGLEDCASE-SOL - These Barge Lights charge during the day and deliver a brilliant
flashing or steady light throughout the night. Fully waterproof. Available in Certified PORT,
BGLEDCASE-SOL STARBOARD, STERN, and FLASHING AMBER. When ordering specify steady or flashing
operation. Series: BGLEDCASE-SOL-(options)
PLATFORM
PLATFORM LIGHT* - Used as obstruction markers, navigation aids, and dock lights. Lenses
can be supplied in Red, Green, Blue Amber, or Clear and in voltages of 6, 12, 24, 120 or 220.
Specify steady or flashing (15, 30, 60 flashes/min.), voltage, and lens color when ordering.
BUNY-OIL BUNY-OIL* - Aids to navigation lights for use on buoys, pilings, or to mark navigational
obstructions. 6-volt battery; steady or flashing light . Flash rate 15, 30, or 60 flashes/min. (or
other rate if specified). Low intensity has a range of 1 - 2 miles; high intensity has a range of 3
- 5 miles. Specify color when ordering.
* Also available with an LED array, rather than an incandescent bulb.
ACLW
HELIPAD LIGHTING
ACLW - Low profile design with rechargeable 6 volt 8 amp battery. Has high gain optical
lens, high intensity lamp and internal charger. Case is heavy fiberglass with a carry handle.
EOL
EOL - This obstruction light is used for nighttime obstruction marking. It is usually steady
burning, but may also be flashing if used with an external flasher unit.
SB503 SB503 - Light has a canvas bag which is filled with sand for ballast. Unit has four filters:
Red, Blue, Amber, Green. Operates off one 6 volt spring battery and uses GE Lamp 503.
115-05
ARC LIGHTS
ARC-1-FM - This Arc Light has 2 million candlepower and a drain of only 4 amps. Life of
lamps (3000 hours), black lexan heads. Size: 12” x 6” x 7”. Weight: 5 lbs. Waterproof.
RACK-ARC-3-FM - This unit has 6 million candlepower and a drain of only 12 amps. Can
RACK-ARC-3 be aimed locally, both horizontal and vertical. Size: 12” x 20” x 7”. Weight: 13 lbs.
ARC-1-FM
STROBE/ROTATING LIGHTS
1212-PAN - Engine room rotating lights. Voltage available: 12, 24 - 120 vac. Also Strobes
(STR Series).
STR-800 FB1-FM FB1-FM - Engine room rotating light. Voltage available: 12, 24, 48, VDC
The products above and below this line are not available from the same manufacturing source.
BECK ELECTRIC
SUPPLY Wilmington, California
Phone: 310-834-1151
Fax: 310-834-1208
Richmond, California
Phone: 510-215-9499
Fax: 510-215-7889
Seattle, Washington
Phone: 206-763-2011
Fax: 206-767-9219
www.beckelectric.com E-mail: socalsales@beckelectric.com E-mail: casales@beckelectric.com E-mail: wasales@beckelectric.com
0116-03 4/27/05 3:13 PM Page 1
116-05
PERKO, INC.
NAVIGATION LIGHT SELECTION CHART
For Commercial Power Driven Vessels Over 20 Meters (65.6 ft.) In Length
This Chart is Provided as a guide for Light Selection, Not Positioning. Refer to the 72 COLREGS and the U.S. Inland Navigation Rules
for Positioning Details. Depending Upon the Activity of the Vessel, It May be Required to Carry a Combination of Several of the
Types of Lights Listed Below. Consult your Local U.S. Coast Guard Office for Specific Vessel Requirements.
Refer to Product Listings for Specific Visibility Arc and Range Requirements.
117-05
PERKO, INC.
SINGLE LENS NAVIGATION LIGHTS DOUBLE LENS NAVIGATION LIGHTS
For Use on Any Length Vessel Over
For Use on Any 20 Meters (65.6 Ft.) in Length
Length Vessel Features
Over 20 Meters Cast Bronze
Complete with a Pre-Wired Medium Prefocus Socket
(65.6 Ft.) and two 3 Foot Lengths of 16/3-S0 Cable Through
Fig. 1172 in Length Watertight Terminal Tubes. Watertight Access Cap
for Rebulbing and Cleaning. Two PERKO Cat. No.
342 004 CLR, 120 Volt Bulbs Included.
Fig. 1164 Important Bulb Data
Features To comply with the U.L. Standard 1104, the
Cast Bronze lights listed on this page must use PERKO Cat. No.
Complete with a Pre-Wired Medium Prefocus Socket and 3 Feet 342 004 CLR bulb or 342 RS4 CLR bulb when a
of 16/3-S0 Cable Through a Watertight Terminal Tube. “Rough Service” bulb is required.
Watertight Access Cap for Rebulbing and Cleaning.120 Volt Bulb Included.
Important Bulb Data
To comply with the U.L. Standard 1104, the lights listed on this page Height Overall Height Lens Weight Mounting Bolt Size
Description Inches Inches Pounds Inches
must use PERKO Cat. No. 342 004 CLR bulb or 342 RS4 CLR bulb when
a “Rough Service” bulb is required. Bronze 17-1/4 6-3/4 17 3/8
www.manning-electric.com
Stocking Distributor for
Perko, INC.
154 27 th Street — Brooklyn, NY 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
0118-03 4/27/05 3:22 PM Page 1
118-05
PERKO, INC.
NAVIGATION LIGHTS
For Use On Vessels 20 Meters (65.6 ft.) to 50 Meters (164.0 ft.) in Length
Red & Green Sidelights Stern or Towing Lights All-Round Lights Masthead Lights
112-1/2° 135° 360° 225°
ALL-ROUND LIGHTS
For Use On Any Length Vessel Over 20 Meters (65.6 ft.)
Important Bulb Data
To comply with Visibility Catalog Catalog
U.L. Standard 1104, Description Miles Number Number
the lights listed on White All-Round Whistle Light 5 454 E00 PLB —
this page must use a
PERKO Cat. No. White All-Round Light* 3 403 E03 PLB 412 E00 PLB
342 004 CLR bulb or Red All-Round Light 3 403 RE3 PLB 412 RE0 PLB
Cat. No. 342 RS4 CLR Green All-Round Light 3 403 GE3 PLB 412 GE0 PLB
when a “Rough
Service” bulb Yellow All-Round Light 3 403 ME3 PLB 412 ME0 PLB
is required. *These Lights are Supplied with Gray Tinted Lenses.
Fig. 412 Figs. 403-3 & 454E
119-05
PERKO, INC.
Navigation Lights
For Use On Vessels Over 20 Meters (65.6 ft.) in Length
Black Plastic
Complete with a pre-wired medium prefocus socket
and one (double lens navigation lights come with two)
3-foot length of 16/3-SO cable through a watertight
terminal tube. Watertight access cap for rebulbing and
cleaning. Bulb not included.
Donovan marine perko federal propellers Buck Al.gonquin Baier hatch Penray
Carlisle & finch co. Mathers Patterson newmar perko Wintech shakespeare
awlgrip Johnson Kahlenberg airhorns Centex marine fab uniden Charles
marine products Hawboldt Industries zodiac jabsco Frank w murphy UMC
deck fittings Racor diamond sea-glaze duramax marine Trellex morse
0120-03 4/27/05 3:24 PM Page 1
120-05
PERKO, INC.
ALL-ROUND LIGHTS
For Use On Vessels 20 Meters (65.6 ft.) to 50 Meters (164.0 ft.) in Length
Plain Bronze Cat. No. Chrome Plated Bronze Cat. No.
Description
Pedestal Base Pipe Mount Base Pedestal Base Pipe Mount Base
White All-Round Light 112 A00 PLB 309 A00 PLB 112 A00 CHR 309 A00 CHR
Red All-Round Light 112 RA0 PLB 309 RA0 PLB 112 RA0 CHR 309 RA0 CHR
Green All-Round Light 112 GA0 PLB 309 GA0 PLB 112 GA0 CHR 309 GA0 CHR
Yellow All-Round Light 112 MA0 PLB 309 MA0 PLB 112 MA0 CHR 309 MA0 CHR
121-05
PERKO, INC.
SPARE PARTS
For Navigation Lights On Vessels Over 20 Meters (65.6 ft.) in Length
DUAL MEDIUM PREFOCUS SOCKET ASSEMBLY 112 1⁄2° LENSES
Phenolic – 250V – 1000W Height Overall Dia. Opening
Plug In Type – Prewired – with two medium prefocus sockets. Color Inches Inches Cat. No.
For use in double lens lights. Red 6-3/4 6-1/8 259 001 RED
Height Overall Width Overall Weight Green 6-3/4 6-1/8 259 001 GRN
Cat. No. Inches Inches Ounces Weight Size 1 Red 7-1/2 9-1/4 259 002 RED
8.5 oz.
303 3-7/8 3-7/8 9 Green 7-1/2 9-1/4 259 002 GRN
Weight Size 2
Male Plug Only Cat. No. 303 A00. 19.5 oz.
Female Plug Only Cat. No. 303 B00. 135° LENSES
Height Overall Dia. Opening
MEDIUM PREFOCUS SOCKETS Color Inches Inches Cat. No.
Phenolic – 250V – 1000W White 6-3/4 5-1/8 269 001 WHT
Height Overall Dia. Overall Standard Weight Per Red 6-3/4 5-1/8 269 001 RED
Cat. No. Inches Inches Package Pkg. Ounces Yellow 6-3/4 5-1/8 269 001 YLW
347 1-7/8 1-1/2 5 21-1/2 Weight Size 1 White 7-1/2 7-1/4 269 002 WHT
14 oz.
347 A00 1-7/8 1-1/2 5 21-1/2 Red 7-1/2 7-1/4 269 002 RED
Weight Size 2
Cat. No. 347 A00 supplied with metal Yellow 7-1/2 7-1/4 269 002 YLW
18.5 oz.
Mounting Cap Tapped for 3/8" I.P.S.
373 003 CLR .77 77A/S8 Red 5-3/4 5-1/2 249 000 RED
Green 5-3/4 5-1/2 249 000 GRN
373 004 CLR 1.15 1.15A/S8
Weight 17 oz. Yellow 5-3/4 5-1/2 249 000 YLW
373 005 CLR 2.03 2.03A/S8SCP
Gray 5-3/4 5-1/2 249 000 GRY
Standard Pkg. – 1 pc. Weight 1 oz.
122-05
PERKO, INC.
Top Vent
Cover
SEARCHLIGHTS – 800 SERIES 10”, 12”, OR 14”
Cast Bronze And Heavy Gauge Brass
12, 24, 32, 120 or 230 Volts
Polished Chrome or White PERKO-KOTE Finish
Halo Deflector
800 Series Searchlights are available in 10”, 12”, and 14”
Heavy Gauge Brass Body
sizes with Deck, Wheel, Lever or Lever/Gear Controls.
Glass Reflector with All models feature: halo deflectors, parabolic glass mirror
Shock Resistant Mounting
reflectors for maximum light output and ventilation covers
Stainless Steel Latches
for quick dissipation of heat to help prolong bulb life.
Weatherproof Construction Hinged front doors have quick release stainless steel latches
Interior Finished in Flat Black
to provide easy access for bulb replacement. 800 Series
Lower Vent Cover models are also available in white Perko-Kote finish;
on 12” and 14” Sizes
an advanced powder coating process that eliminates
Slide-Lock Focusing the need for painting while providing a scratch-resistant,
Device Behind Lower Vent
chip-proof surface. Bulbs are not included and must be
Heavy-Duty Yoke Mounting ordered separately. They are available in traditional
incandescent or quartz halogen.
3-Wire Cable,
Grounded
Base has Floating Stops to Allow
400 Degree Rotation
123-05
PERKO, INC.
10”, 12”, AND 14” SEARCHLIGHTS
Standard Pedestal Searchlight Head Assemblies
LEVER CONTROL WHEEL & LEVER/GEAR CONTROL
Reflector “J” Polished White Polished White
Size Height Overall Chrome PERKO-KOTE Chrome PERKO-KOTE
Inches Inches Catalog No. Catalog No. Catalog No. Catalog No.
Medium
Pedestal 10 20-1/8 884 0P1 CHR 884 0P1 WHT 885 0P1 CHR 885 0P1 WHT
12 22-1/8 884 0P2 CHR 884 0P2 WHT 885 0P2 CHR 885 0P2 WHT
14 25-1/8 884 0P3 CHR 884 0P3 WHT 885 0P3 CHR 885 0P3 WHT
Searchlight Dimensions
Wheel &
Lever/Gear “A” Nominal Drum “C” Length Nominal
Control Diameter Head Weight
Wheel & Inches Inches Pounds
Lever/Gear 10 13 28
Control
12 15 38
14 17 45
Lever Control
Assembly LEVER CONTROL WHEEL & LEVER/GEAR CONTROL
Length Control Nominal Weight For Standard Pedestal For Medium Pedestal For High Pedestal For Standard Pedestal For Medium Pedestal For High Pedestal
Inches Pounds Cat. No. Cat. No. Cat. No. Cat. No. Cat. No. Cat. No.
“E” Lever/Gear Control Fig. 969
8-1/2 6 851 000*** 851 M00*** 851 H00*** 969 000** 969 M00** 969 H00**
15-1/2 9 851 0A0 851 MA0 851 HA0 969 0A0 969 MA0 969 HA0
22-1/2 12 851 0B0 851 MB0 851 HB0 969 0B0 969 MB0 969 HB0
29-1/2 15 851 0C0 851 MC0 851 HC0 969 0C0 969 MC0 969 HC0
“F” Wheel Control Fig. 852
7-1/2 6 — — — 852 000* 852 M00* 852 H00*
14-1/2 9 — — — 852 0A0 852 MA0 852 HA0
21-1/2 12 — — — 852 0B0 852 MB0 852 HB0
28-1/2 15 — — — 852 0C0 852 MC0 852 HC0
*Maximum Ceiling Thickness, 3” **Maximum Ceiling Thickness, 3-1/2” ***Maximum Ceiling Thickness, 4-1/2”
Note: To order, specify Head Assembly No., Catalog No., or Control Assembly Catalog No.
Bulbs must be ordered separately.
124-05
PERKO, INC.
BULB AND SOCKET ORDERING INFORMATION
For Searchlights 800 Series – 10”, 12”, and 14”
Bulbs are not included in lights
To give good results, the bulb and reflector must be perfectly to many factors, (i.e., a light source out of focus by 1/32 inch,
compatible. Therefore, be sure to specify the catalog number under-voltage of only 4%, or differences between bulb
of the bulb desired. Peak candlepower is exceedingly sensitive manufacturers can cause a reduction of range of up to 20%).
INCANDESCENT BULBS
Bulb Socket For Searchlight Rated* Mfg.
Catalog Number Voltage Wattage Socket Type Code Letter Sizes Inches Life Hours Bulb Code
806 32 500 Medium Screw B 10, 12, 14 50 DLT
807 120 500 Medium Prefocus E 10, 12, 14 25 CZX
809 120 750 Medium Prefocus E 12, 14 25 DPJ
837 120 750 Medium Prefocus E 12, 14 200 DDY
810 120 1000 Medium Prefocus E 12, 14 25 DRS
811 120 1000 Mogul Screw D 12, 14 25 DRW
860 230 1000 Medium Prefocus E 12, 14 50 DWK
For a More Concentrated Beam, Longer Range, Brighter Light and a Longer Life, We Recommend the Following Bulbs.
125-05
PERKO, INC.
BULB TECHNICAL DATA FOR 800 SERIES SEARCHLIGHTS
The Following Chart is Provided to Aid in Proper Bulb Selection
Searchlight Approximate Bulb Bulb Rated Maximum Horizontal Vertical
Size Voltage Range Catalog Life Candlepower Beam Spread Beam Spread
Wattage
Inches Miles* Number Hours** Output Degrees Degrees
12 1 816 100 50 1,168,000 1.7 1.4
24 1 836 150 50 891,000 2.6 1.5
32 3/4 817 200 200 571,000 2.6 1.7
10” 32 1 806 500 50 943,000 3.4 3.9 Mogul Prefocus
120 1 820 600 75 908,000 4.4 2.2
120 1-1/8 807 500 25 1,332,000 3.5 2.8
120 1-1/8 844 500 100 1,375,000 3.1 3.4
12 1-1/4 816 100 50 1,617,000 1.5 1.2
24 1-1/8 836 150 50 1,349,000 2.2 1.5
32 7/8 817 200 200 865,000 2.4 1.6
32 1-1/8 806 500 50 1,496,000 3.4 3.5 Medium Prefocus Medium Screw
120 1 837 750 200 977,000 4.1 3.7
120 1 845 750 200 1,185,000 3.7 5.2
120 1-1/8 820 600 75 1,410,000 4.3 1.9
12” 120 1-1/4 809 750 25 1,747,000 3.6 3.4
120 1-1/4 844 500 100 1,790,000 3.2 3.4
120 1-1/4 807 500 25 1,799,000 3.3 3.1
120 1-1/4 811 1000 25 1,816,000 4.0 4.9 2-Pin Prefocus
120 1-3/8 810 1000 25 1,894,000 4.0 3.8 ** The approximate ranges listed above
120 1-3/8 846 1000 200 1,911,000 3.9 5.0 are based on photometric measure-
120 1-1/2 839 900 75 2,482,000 4.5 5.5 ments of beam candlepower output
230 7/8 860 1000 950 865,000 6.9 5.9 under ideal conditions. Many factors
12 1-1/4 816 100 50 1,756,000 1.5 1.0 such as atmospheric conditions, size
24 1-1/8 836 150 50 1,367,000 2.3 1.2 and color of target, background, etc.,
32 1 817 200 200 943,000 2.2 1.5 may reduce effective range consider-
32 1-1/8 806 500 50 1,591,000 4.0 3.7 ably; therefore, these figures are offered
120 1-1/8 837 750 200 1,254,000 3.9 4.5 only as a guide to compare different
120 1-1/8 845 750 200 1,531,000 3.6 5.1 bulb and voltage options.
120 1-1/4 820 600 75 1,626,000 4.5 1.9 ** NOTE: These are the “Rated Average
14” 120 1-3/8 844 500 100 2,007,000 2.9 3.2 Laboratory Life in Hours” of the Bulb
120 1-3/8 811 1000 25 2,249,000 4.0 5.1 Manufacturer obtained in closely
120 1-1/2 807 500 25 2,353,000 3.2 3.2 controlled laboratory life testing of
120 1-1/2 809 750 25 2,361,000 3.7 4.0
groups of lamps at their design voltage.
It is not necessarily the same as the
120 1-1/2 846 1000 200 2,586,000 3.8 5.0 service life where conditions such as
120 1-1/2 810 1000 25 2,621,000 4.0 4.5 shock, vibration, voltage fluctuation
120 1-5/8 839 900 75 2,889,000 4.5 5.2 and environment may result in a
230 1 860 1000 950 1,021,000 7.7 6.2 shorter average attained life.
Medium Screw Socket Medium Prefocus Socket 2-Pin Prefocus Socket 2-Pin Prefocus Socket Mogul Screw Socket Mogul Prefocus Socket
(Code “B”) (Code “E”) (Codes “F, G, H & I”) (Code “K”**) (Code “D”) (Codes “L & M”)
Catalog No. 894 Catalog No. 895 Catalog No. 899 Catalog No. 866 Catalog No. 897 Catalog No. 893
**For Use In 10”, 12” and 14” Searchlights Except When Catalog No. 839, 900W Bulb is Used (Socket Codes “F, G, H, & I”).
**For Use In 12”, 14“ and 19” Searchlights Only When the Catalog No. 839, 900W Bulb is Used.
126-05
PERKO, INC.
SEARCHLIGHT WITH PILOT HOUSE CONTROL
DESCRIPTION BENEFITS
• Complete with lever action • Up to 500,000 candle power
pilot house control • Searchlight beam range up to 3/4 mile
• Chrome plated brass construction • Easy to replace sealed beam
• Sealed beam design eliminates focus problems
FEATURES
• Available in 7" or 8" models
• For 12, 24 or 32V systems PHYSICAL DIMENSIONS 7 Inch 8 Inch
• Tin plated electrical contacts • Overall Length 24" 26"
and wiring • Maximum ceiling thickness 5" 5"
• 380° horizontal movement, • Barrel Length 7-7/32" 6-13/32"
70° vertical movement • Barrel Diameter 7-3/32" 8-3/16"
• For ceiling thickness of up to 5" • Height above the deck 14" 15"
• Corrosion resistant, splash • Protrusion below the ceiling 5-1/2" 5-1/2"
proof construction • Carton Size 12-1/2" x 13" x 28-1/4"
Catalog No. Spare Sealed Candle Range Ship Wt. Carton (lbs.)
Size Chrome White Wattage Voltage Beam No. Power (Miles) Standard Pkg.
7” HEAD 314 C07 12V 314 W07 12V 100 12V 433 003 12V 250,000 5/8 12.6
314 C07 24V 314 W07 24V 450 24V 433 003 24V 470,000 3/4 12.
314 C07 32V 314 W07 32V 200 32V 433 003 32V 260,000 5/8 13.8
8” HEAD 314 C08 12V 314 W08 12V 250 12V 433 004 12V 500,000 3/4 13.6
314 C08 24V 314 W08 24V 600 24V 433 004 24V 500,000 3/4 14.1
314 C08 32V 314 W08 32V 600 32V 433 004 24V* 500,000 3/4 15.0
*Used in conjunction with Internal Dropping Resistor (Cat. No. 314 R32 99A)
CONTROL ASSEMBLIES
D
Figs. 851, 852, & 969
Fig. 305 Fig. 313 Stainless Steel Tubes With Chrome Plated Fittings
Control assemblies of different lengths may be interchanged
to offer a large variety of searchlights with a minimum of inventory.
“E” “E” “F”
Control Length Inches Lever Lever/Gear Wheel Nominal
Control* Control Control Weight
F “E” “F” Cat. No. Cat. No. Cat. No. Pounds
H
8-1/2 7-1/2 851 000 969 000 852 000 6
Fig. 851 Fig. 969 15-1/2 14-1/2 851 0A0 969 0A0 852 0A0 9
Fig. 852 22-1/2 21-1/2 851 0B0 969 0B0 852 0B0 12
G 29-1/2 28-1/2 851 0C0 969 0C0 852 0C0 15
127-05
PERKO, INC.
19” SEARCHLIGHTS – 1900 SERIES
All Aluminum – White Perko-Kote Finish 32V, 120V, or 230V
Fig. 1902 Lever/Gear Control Wheel Control Deck Control Distant Electric Control Base
SEARCHLIGHT HEAD AND CONTROL ASSEMBLIES ELECTRIC SOCKET AND SUPPORT STAND ASSEMBLIES
Description Catalog No. Searchlights include a socket and support stand based on the bulb or socket
information given when ordering. The following chart makes it possible to order
Deck Control Searchlight Head Assembly* 1901 004 WHT and stock different assemblies for field conversion, to meet a large variety of
Wheel or Lever/Gear Control Searchlight Head Assembly 1902 004 WHT voltage and candlepower requirements with a minimum of inventory.
(Requires Control Assembly Below)
Searchlight Head Assembly For Distant Electric Control Base 1902 DE4 WHT Socket Socket & Stand Height
Socket Type Code Catalog Number Stand Inches
Wheel Control Assembly (For Above) 1922 000 WHT
Lever/Gear Control Assembly (For Above) 1921 000 WHT Medium Screw B 872 004 5-3/4
Distant Electric Control Base 1925 000 WHT Medium Prefocus E 873 004 5-7/16
*Can Not Be Fitted With Controls. Mogul Prefocus (1500W) L 1930 004 3-5/8
Custom Control Lengths and Pedestal Heights are Available. Specify Measurements. Mogul Prefocus (1000W & 2000W) M 1931 004 3-1/8
2-Pin Prefocus (900W) K 880 004 7-5/16
Horizontal Vertical
Approx. Bulb Socket Rated Maximum Beam Beam Mfg.
Range Catalog Code Life Candlepower Spread Spread Bulb
Voltage Miles* Number Bulb Type Socket Type Letter Wattage Hours** Output Degrees Degrees Code
32 1-2/3 806 Incandescent Medium Screw B 500 50 3,520,000 3.5 3.7 DLT
120 1-3/8 837 Incandescent Medium Prefocus E 750 200 2,076,000 3.6 4.2 DDY
120 1-5/8 845 Quartz/Halogen Medium Prefocus E 750 200 2,871,000 3.6 5.4 BTP
120 1-5/8 807 Incandescent Medium Prefocus E 500 25 3,191,000 3.5 4.0 CZX
120 1-2/3 859 Quartz/Halogen Mogul Prefocus M 2000 250 3,633,000 9.4 5.9 BVW
120 1-2/3 847 Quartz/Halogen Mogul Prefocus M 1000 200 3,659,000 4.5 5.4 BVV
120 1-3/4 844 Quartz/Halogen Medium Prefocus E 500 100 4,212,000 3.0 5.4 BTM
120 1-3/4 809 Incandescent Medium Prefocus E 750 25 4,454,000 3.6 4.5 DPJ
120 1-7/8 846 Quartz/Halogen Medium Prefocus E 1000 200 4,601,000 4.5 5.4 BTR
120 2 848 Quartz/Halogen Mogul Prefocus L 1500 100 5,596,000 5.9 5.7 DTA
120 2 810 Incandescent Medium Prefocus E 1000 25 5,622,000 3.6 4.2 DRS
120 2 839 Quartz/Halogen 2-Pin Prefocus K 900 75 5,769,000 5.9 5.4 BVA
120 2-1/8 840 Incandescent Mogul Prefocus L 1500 25 5,968,000 5.6 5.4 DRW
230 1-3/8 860 Quartz/Halogen Medium Prefocus E 1000 950 2,162,000 7.9 6.5 FKD
** The approximate ranges listed above are based on photometric measurements of beam candlepower output under ideal conditions. Many factors such as atmospheric conditions, size and color of
target, background, etc., may reduce effective range considerably; therefore, these figures are offered only as a guide to compare different bulb and voltage options.
** NOTE: These are the “Rated Average Laboratory Life in Hours” of the Bulb Manufacturer obtained in closely controlled laboratory life testing of groups of lamps at their design voltage. It is not
necessarily the same as the service life where conditions such as shock, vibration, voltage fluctuation and environment may result in a shorter average attained life.
128-05
XENON LAMPS
Assembly Weight: 145 lbs.
Base Diameter: 12” Ordering Information
Gross Shipping Weight
(Including Crate)
Searchlight 258 lbs.
Power Supply 264 lbs.
Control Rod & Tube 19 lbs.
WARNING: Xenon lamps are filled with Xenon Gas under high pressure.
They may explode in either hot or cold state, especially if dropped or
mishandled. Always wear protective safety equipment (a protective face
mask with neck guard, chest protector, heavy clothing and leather gloves)
when handling a lamp.
6” Amperage Ratings
Xenon Lamp Catalog Current Recommended Candle Range
Size Number Range Operation Power Miles
300 Watt* 9563-000 12A - 16A 15A @ 20V 20,000,000 3.1
18” 500 Watt* 9565-000 20A - 30A 30A @ 15V 35,000,000 3.8
800 Watt 9568-000 30A - 45A 37A @19V 65,000,000 4.5
1000 Watt 9560-000 30A - 55A 50A @ 20V 80,000,000 5.1
Fig. 9854 Light Power Supply 1600 Watt 9566-000 50A - 70A 65A @ 24V 100,000,000 5.5
Shown With Remote Distant Fig. 9512-000 (220V)
Electric Control Base * 300W and 500W lamps shown as replacements on VARO 300W and 500W Searchlights only—
or 9514-000 (440V)
Not used on 9854 Series Searchlights.
129-05
See our page BECK ELECTRIC SUPPLY HARBOR SHIP ELECTRIC – Wilmington, CA (310) 834-1151
in the Seattle, WA (206) 763-2011 MANNING ELECTRIC, INC. – Brooklyn, NY (718) 832-2488
Advertising Section Richmond, CA (510) 215-9499 ARGO INTERNATIONAL – New York, NY (212) 431-1700
REILY ELECTRICAL SUPPLY POTTER ELECTRIC – National City, CA (619) 474-8171
Metairie, LA (504) 835-8888 ELECTRICAL EQUIPMENT CO. – Norfolk, VA (757) 857-1100
www.phoenixproducts.com 8711 W. Port Avenue, Milwaukee, WI 53224 USA • Tel: (414) 973-3300 • Fax: (414) 973-3210 • E-Mail: marketing@phoenixproducts.com
0130-03 4/28/05 8:12 AM Page 130
130-05
Model MRS64/1000
MODEL NUMBER
Uses PAR 64 mogul end prong halogen or
MRS64/1000 Clear Lens incandescent lamps.
MRS64/1000-RL Red Lens
MRS64/1000-YL Amber Lens Wiring: 4’ (1.2 m) long, 3-conductor heavy duty
MRS64/1000-SL Searchlight Handle SEO cord.
Dimensions: 14” (35.6 cm) Wide
Accessories Coupling/Torque Tube Kits 17-5/8” (44.8 cm) High
GL-R Glass Cover Lens - Red TTK-8 8” Kit 11” (27.9 cm) Deep
WG-4 Wire Lens Guard TTK-16 16” Kit Weight: 22 - 35 lbs (10 - 15.9 kg)
TLK Twist Lever Kit TTK-24 24” Kit Compliances: UL listed; CSA Certified.
HWK Hand Wheel Kit TTK-32 32” Kit 595 Marine Outside Type
LK Lever Kit EK Extension Kit U.S. Coast Guard Accepted
PK Pedestal Kit Floodlights: 1571 Suitable for Wet Locations
www.manning-electric.com
Stocking Distributor for
Phoenix Products Company
154 27 th Street — Brooklyn, NY 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
0131-04 4/28/05 8:13 AM Page 1
131-05
BECK ELECTRIC
SUPPLY Wilmington, California
Phone: 310-834-1151
Fax: 310-834-1208
Richmond, California
Phone: 510-215-9499
Fax: 510-215-7889
Seattle, Washington
Phone: 206-763-2011
Fax: 206-767-9219
www.beckelectric.com E-mail: socalsales@beckelectric.com E-mail: casales@beckelectric.com E-mail: wasales@beckelectric.com
3071 - 04 4/28/05 8:14 AM Page 1
132-05
A heavy-duty floodlight suitable for harsh marine environments where corrosion resistance and durability are
demanded. Applications include hull-perimeter security lighting.
Specifications
Housings: Heavy-wall, low copper content, ribbed
extruded aluminum housings for greater strength and
corrosion resistance.
Compliances
Series Watt/Type Voltage Mounting UL Listed - Standard 1598A
example: Marine Outside Type (Saltwater)
MSR 400HPS QV TMH
Indoor/Outdoor
MSR 400HPS QV TMH
1000HPS 480V PMH Enclosure Type 4
SMH
Meets US Coast Guard Requirements
See our page BECK ELECTRIC SUPPLY HARBOR SHIP ELECTRIC – Wilmington, CA (310) 834-1151
in the Seattle, WA (206) 763-2011 MANNING ELECTRIC, INC. – Brooklyn, NY (718) 832-2488
Advertising Section Richmond, CA (510) 215-9499 ARGO INTERNATIONAL – New York, NY (212) 431-1700
REILY ELECTRICAL SUPPLY POTTER ELECTRIC – National City, CA (619) 474-8171
Metairie, LA (504) 835-8888 ELECTRICAL EQUIPMENT CO. – Norfolk, VA (757) 857-1100
www.phoenixproducts.com 8711 W. Port Avenue, Milwaukee, WI 53224 USA • Tel: (414) 973-3300 • Fax: (414) 973-3210 • E-Mail: marketing@phoenixproducts.com
0132-03 4/28/05 8:15 AM Page 1
133-05
Kerger Marine Electric, Inc. Head Office: Kerger & Co. B.V.
4350 South Wayside Drive, Suite 104 U.S. AGENTS for PETERS & BEY NAVIGATION LIGHTS Fokkerstraat 515
Houston, TX 77087 3125 BD Schiedam
Phone: (713) 643-3326 Visit our Website for more information: www.kerger.com The Netherlands
Fax: (713) 643-6683 Phone: 31-104374500
(800) 328-3670 ALL MAIN EUROPEAN PARTS AVAILABLE IN SHORT TIME Fax: 31-104376825
E-mail: saleshouston@kerger.com E-mail: sales@kerger.nl
0134-05 4/28/05 8:16 AM Page 1
134-05
?? ?
Having trouble finding THE PRODUCTS
135-05
136-05
137-05
138-05
Finish: Natural
Reflector: White inside and outside.
Globe: Screw type clear.
Lampholder: #684A1 Listed by Underwriters’ Laboratories, Inc.
File No. E35347
Guard: Cast bronze.
139-05
57071 53091
Fresnel Flared Lip Type Regulation Fresnel Lenses BLINKER TELEGRAPH LIGHTS
Type “F” - 100 Watt 360° - 6" Dia. Cast Bronze
Size 4-5/8" Dia. x 6-1/2" High Cat. No. Description 100 Watt
Cat. No. Description 57071 Clear
53091 Clear 57072 Ruby
53092 Ruby 57073 Green
53094 Green 57074 Blue
53095 Blue 57075 Amber
?? ?
Having trouble finding THE PRODUCTS
140-05
REPLACEMENT GLASSWARE
For Lighting Fixtures - Screw Thread Type
4911
4900-MC
For Chart Room Mounting
Minimum wall space required. Swing joint has knurled thumb
screw to permit locking in any position on 180° arc. 30” 317
overall length. 330
4911 - Adjustable tubular shade, key switch, cast bronze
mounting box and swing joint.
4900 - Parabola shade, key switch, cast bronze mounting box
and swivel joint.
4900-MC - Same as 4900, but with ground terminal and
3-conductor cable. 42
6686 6685
4920
?? ?
Having trouble finding THE PRODUCTS
141-05
COMBINATION SWITCH
AND INDICATOR LIGHTS
Watertight – Cast Bronze
2 Wire – 125 Volts
Single Pole 219
Finish: Natural bronze. Combination
3832
Outlet: Max. 3/4” IPS straight through.
Dimensions Cat. Nos.
Furnished blank unless otherwise specified. Switch Recept.
Lampholder: #216P standard. Suitable for L W H 2W/3P 3W/4P
6 watt candelabra base lamps. Name Double Pole Single 6-3/4” 3-1/4” 4” 219 269
plates available (please specify). Double Pole Duplex 8-3/8” 3-1/4” 4” 229 279
Globe: #19 green globe standard.
Green, blue and amber optional.
Switches: 871 DP standard. Replacement Parts
Dimensions Plug Switch Interior
Cat. No. Description Description
L W H 3830 2W/3P 3W/4P Double
Available through
PORT ELECTRIC SUPPLY CORP.
248-256 Third Street • Elizabeth, NJ 07206
Tel: (908) 355-1900 • Fax: (908) 355-0041
Oceanic Electrical Mfg. Co., Inc.
Elizabeth, New Jersey e-mail: pe1901@mindspring.com
0140-04 4/28/05 8:30 AM Page 1
142-05
1212F
1200
251
BECK ELECTRIC
SUPPLY Wilmington, California
Phone: 310-834-1151
Fax: 310-834-1208
Richmond, California
Phone: 510-215-9499
Fax: 510-215-7889
Seattle, Washington
Phone: 206-763-2011
Fax: 206-767-9219
www.beckelectric.com E-mail: socalsales@beckelectric.com E-mail: casales@beckelectric.com E-mail: wasales@beckelectric.com
0141-03 4/28/05 8:31 AM Page 1
143-05
WATERTIGHT SWITCHES
Cast Bronze - Aluminum Alloy WATERTIGHT RECEPTACLES
Cast Bronze - 10 Amp, 125 V
10 Amp. 125 V - 10 Amp, 250 V. “T” Rated
822
879
832 1848
RECTANGULAR BOX TYPE
RECTANGULAR BOX TYPE Box Dimensions
Cat. No. Description
Box Dimensions L W H
Cat. No. Description
Length Width Depth SINGLE GANG
BULKHEAD MOUNTING 879 2 Wire Single Receptacle 4-1/4” 2-7/8” 2”
822 Double Pole 3-3/4” 3” 2” 1879 3 Wire Single Receptacle 4-1/4” 2-7/8” 2”
FLUSH MOUNTING TWO GANG
832 Double Pole 3-3/4” 3” 2” 895 2 Gang 2 Wire Receptacle 4-1/4” 2-7/8” 2”
ROUND BOX TYPE 2879 2 Gang 3 Wire Receptacle 6-1/2” 2-7/8” 2”
Diameter Height THREE GANG
1848 Indicating-Double Pole 3” 3” 893 3 Gang 2 Wire Receptacle 6-1/2” 2-7/8” 2”
893SP 3 Gang 3 Wire Receptacle 8-1/2” 3-1/4” 2”
Finish: Natural bronze. Also available in Aluminum Alloy
FOUR GANG
by adding suffix letter “A” to Cat. No. Chrome, Nickel,
Cadmium or other special finishes available on request. 894 4 Gang 2 Wire Receptacle 8-1/4” 2-7/8” 2”
894SP 4 Gang 3 Wire Receptacle 11” 3-1/4” 2”
Outlets: Maximum 3/4” IPS straight through.
Furnished blank unless otherwise specified. Finish: Natural bronze.
Outlets: Maximum 3/4” IPS straight through.
Furnished blank unless otherwise specified.
144-05
THRU-BULKHEAD
Flush Mounting JUNCTION BOX TYPE GLOBE TYPE
Designed for use in locations
where it is desirable to conceal wiring.
FINISH – Natural bronze. Available in cast
aluminum by adding suffix letter “A” to Cat. No. 2950
OUTLETS – Maximum 1” IPS four way.
Furnished blank unless otherwise specified. RECTANGULAR COMBINATION
BOX TYPE BOX TYPE
Flange Box Box
Cat. No. Description
O.D. O.D. Depth
Cat. No. For Use with Diameter
2950 Box Only 5-3/4” 3-1/2” 2-3/8”
432 3” Junction Box 3-3/8”
2950MC Complete with 2 wire connection block
417 4” Junction Box 4-5/8”
2951 Box Only 5-3/4” 3-1/2” 3-3/8”
120 60-100 Watt Globe 3-3/8”
2951MC Complete with 2 wire connection block
121 150 Watt Globe 4-3/8”
122 200 Watt Globe 4-3/4”
123 300 Watt Globe 6”
SQUARE TYPE 128 15 Watt Flare Globe 2-7/8”
FINISH – Natural bronze. Available in cast aluminum by adding
suffix letter “A” to Cat. No.
Cat. No. For Use with Dimensions
OUTLETS – Maximum 1-1/4” IPS four way, or maximum two
3/4” IPS per side. Furnished blank unless otherwise specified. 124 40 Watt Flare Globe 3-1/2” Dia.
DIMENSIONS – 4-1/2” x 4-1/2” x 2-1/4”. 125 100 Watt Flare Globe 4-3/8” Dia.
COVER – Cat. No. 418. GASKET – Cat No. 417. 126 #330 Globe 9” Dia.
Cat. No. Description 161 Rectangular Box 4-1/8” x 2-3/4”
2900 Box Only 162 Combination box 6-1/4” x 2-3/4”
2900MC Box complete with cover, gasket, 127 6” Bowl 6” Bowl
and four wire connection block
2900MC-6 Box complete with cover, gasket, 129 8” Bowl 8” Dia.
and six wire connection block
?? ?
Having trouble finding THE PRODUCTS
146-05
147-05
RECEPTACLES
Grounded receptacles available
by adding suffix letter “G” to Cat. No. 775 773 774 783 784
Rating – Amps
Cat. No. Description
125 V 250V Rating – Amps
Cat. No. Description
785 One Unit 15A 10A 125 V 250V
786 Two Unit 15A 10A 773 Single Receptacle 15A 10A
787 Three Unit 15A 10A 774 Duplex Receptacle 15A 10A
783 Single Receptacle 15A 10A
784 Duplex Receptacle 15A 10A
784F Flush Duplex Receptacle 15A 10A
SWITCHES
Rating – Amps
Cat. No. Description
125 V 250V
794 One Switch–Single Pole 10A-T 5A REPLACEMENT PARTS
795 Two Switches–Single Pole 10A-T 5A For Lighting Fixtures and Boxes
19R
797 Three Switches–Single Pole 10A-T 5A Cat. No. Description
796 One Switch–Three Way 10A-T 5A 19R Red Indicator Lens Assembly
796T Two Switches–Three Way 10A-T 5A 788
19G Green Indicator Lens Assembly
19B Blue Indicator Lens Assembly
19A Amber Indicator Lens Assembly
21
COMBINATION SWITCH & RECEPTACLE 19C Clear Indicator Lens Assembly
Rating – Amps 21 Canopy Toggle Switch w/ Leads
Cat. No. Description
125 V 250V 23 Single Pole Toggle Switch
788 Single Pole Switch with One Receptacle 10A-T 15A 24 Three Way Toggle Switch
789T Three Way Switch with One Receptacle 10A-T 15A 25 Four Way Toggle Switch
790 Single Pole Switch with Two Receptacles 10A-T 15A 12 2 Wire Receptacle Interior 23 12
?? ?
Having trouble finding THE PRODUCTS
148-05
Phone: 781-662-9300
Fax: 781-665-0180
E-mail: mkp@dornequipment.com
27 UPHAM STREET • MELROSE, MASSACHUSETTS 02176 Web: www.dornequipment.com
0147-04 4/28/05 8:38 AM Page 147
149-05
DORN EQUIPMENT CORP. Jo-Kell, Inc. Potter Electric, Inc. Todd Marine Electrical Supply
T: 781-662-9300 F: 781-665-0180 Chesapeake, Virginia National City, California Norfolk, Virginia
www.dornequipment.com T: 757-523-2900 F: 757-523-8773 T: 619-474-8171 F: 619-474-1947 T: 757-855-3111 F: 757-857-1665
Distributed by:
American Fabrication & Surplus Murray-Benjamin Electric Co. Seacoast Electric Co., Inc. Young Engineering Co., Inc.
Virginia Beach, Virginia Stamford, Connecticut Hawthorne, New York New Orleans, Louisiana
T:757-460-9889 F: 757-460-9890 T: 203-705-2100 F: 203-705-2111 T: 914-747-3870 F: 914-747-3919 T: 504-581-6292 F: 504-525-5132
0172-03 4/28/05 8:38 AM Page 1
150-05
www.manning-electric.com
Stocking Distributor for
Pauluhn Electric Mfg., LLP
154 27 th Street — Brooklyn, NY 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
0149-04 4/28/05 8:39 AM Page 1
151-05
1 2 5 6 7 8
Z Mogul Base Series Mounting Type & Outlets (cont’d.) Wattage (cont’d.) Voltage (cont’d.)
1 Lamp Type -C3 3/4” Ceiling-2 Way -70 70W (LX*, MH) -20 208VAC
-LX High Pressure Sodium -C4 3/4” Ceiling-4 Way -75 75W (MV) -24 240VAC
-MH Metal Halide -C5 1“ Ceiling-4 Way -10 100W ( LX*, MH, MV*) -27 277VAC
-MV Mercury Vapor -P1 1“ Pendant Mount -15 150W (LX*, MH) -48 480VAC
-P3 3/4” Pendant Mount -17 175W (MH*, MV*) -MT 120/208/240/277
2 Fixture Material -S 1-1/4” Stanchion -20 200W (LX*) (For 50 Hz consult the Factory)
-A Aluminum -S1 1-1/2” Stanchion -25 250W (LX*, MH*, MV*)
-S 316 Stainless Steel * AVAILABLE FOR MOGUL BASE 8 Options
4 Mounting Material -EP Electro-Polish
3 Mounting Type & Outlets -A Copper-Free Aluminum 6 Guard (Option) -CG Clear Globe
-B2 1“ Wall Mount-2 Way -S Cast 316 Stainless Steel -G -LC Light Continuator
-B3 3/4” Wall Mount-2 Way -IR Instant Restrike
-B4 3/4” Wall Mount-4 Way 5 Wattage 7 Voltage -F Fused Ballast
-B5 1“ Wall Mount-4 Way -35 35W (LX) -12 120VAC -N Angle Reflector
-C2 1“ Ceiling-2 Way -50 50W (LX*, MV) -127 120/277VAC -L Shallow Dome Reflector
152-05
NHIDLS4IB NHIDLS10IB
CONSTRUCTION: The lens frame and mounting brackets are made GASKETS: One piece, molded, high temperature silicone gasket
of 316 stainless steel. The housing is available in 316 stainless steel, for long lasting watertight seal.
natural finish for a completely stainless steel fixture. Also available REFLECTOR: Highly specular hammertone aluminum.
in marine grade aluminum, polyester powder coated or Brass.
Lamps are not included. OPTIONS: The following options are available by adding the
following suffix to the catalog number:
BALLAST: The ballast supplied is a high power factor, multi-tap, “-LC” for Aux. Quartz Light (Light continuator), “-RB” for Remote
120/208/240/277V 60 Hz. Other voltages are available as options. Ballast, “-IR” for Instant Restrike* (HPS ONLY), “-F” for Fused Ballast,
FEATURES: Eight positive-locking spring loaded, stainless steel hinged (not for 1000w), “-486” for 480V 60 Hz. Ballast, “-CB” for Housing
latches for easy access to the interior components. By changing modified to accept Crane Boom Mount (INX7001). Also available
only four screws on the two hinges, the unit can be opened in any optional Shock mounts, Lens guards, Visor, Shock and Vibration lamp
of four directions. support, 220V 50 Hz. Ballast and other voltages.
LENS: The high impact tempered glass lens is thermal and shock resistant.
Watt Material Weight Temperature Code Cat. No.
HIGH PRESSURE SODIUM 70-1000W
70W Stainless 23 lbs. T2B NHIDLS7IB
70W Aluminum 21 lbs. T2B NHIDLA7IB
100W Stainless 25 lbs. T2B NHIDLS1IB
100W Aluminum 23 lbs. T2B NHIDLA1IB
150W Stainless 27 lbs. T2B NHIDLS15IB
150W Aluminum 24 lbs. T2B NHIDLA15IB
250W Stainless 42 lbs. T1 NHIDLS25IB
250W Aluminum 32 lbs. T1 NHIDLA25IB
400W Stainless 48 lbs. T1 NHIDLS4IB
400W Aluminum 38 lbs. T1 NHIDLA4IB
1000W Stainless 98 lbs. — NHIDLS10IB
1000W Aluminum 70 lbs. — NHIDLA10IB
MERCURY VAPOR 100-1000W
100W Stainless 24 lbs. T2B NHIDMS1IB
100W Aluminum 22 lbs. T2B NHIDMA1IB
175W Stainless 26 lbs. T2B NHIDMS17IB
175W Aluminum 23 lbs. T2B NHIDMA17IB
250W Stainless 38 lbs. T1 NHIDMS25IB
250W Aluminum 31 lbs. T1 NHIDMA25IB
400W Stainless 41 lbs. T1 NHIDMS4IB
400W Aluminum 34 lbs. T1 NHIDMA4IB
1000W Stainless 70 lbs. — NHIDMS10IB
1000W Aluminum 55 lbs. — NHIDMA10IB
METAL HALIDE 175-1000W
175W Stainless 29 lbs. T2B NHIDHS17IB
175W Aluminum 27 lbs. T2B NHIDHA17IB
250W Stainless 36 lbs. T1 NHIDHS25IB
250W Aluminum 33 lbs. T1 NHIDHA25IB
400W Stainless 44 lbs. T1 NHIDHS4IB
400W Aluminum 35 lbs. T1 NHIDHA4IB
1000W Stainless 75 lbs. — NHIDHS10IB
1000W Aluminum 60 lbs. — NHIDHA10IB
153-05
9-1/4”
20/35W—30”
FEPR240A FEPR240A-CY4 40/110W—54” 11-1/2”
www.manning-electric.com
Stocking Distributor for
Pauluhn Electric Mfg., LLP
154 27 th Street — Brooklyn, NY 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
0152-04 4/28/05 8:42 AM Page 1
154-05
Mounts D
Wall 7-1/4”
Standard 6-7/8” FWFN (Flat lens)
Surface 5-3/4”
Options
Suffix Description Suffix Description
Cat. No. A B C
FWN 20W or 35W 31-1/2” 30-1/4” 29-1/4” -EP Electro-Polish (S.S.) -ES Energy Saving Ballast
FWN 40W, 60W, or 110W 55-1/2” 54-1/4” 53-1/4” -SM Shock Mount -EL Electronic Ballast
FWFN 20W or 35W 31-1/2” 30-1/4” 29-1/4” -SF Surface Mount -EM Emergency Ballast (1 lamp)
FWFN 40W, 60W, or 110W 55-1/2” 54-1/4” 53-1/4” -LL Wall Mount -EMC Emergency Ballast for cold
-PM Pipe Mount temperature applications
-PT Pendant Mount -F Fused Ballast
CONSTRUCTION: The lens frame and latches are made of stainless steel. -BC Beam Clamp with -12 12VDC
The housing and mounts are available in 316 stainless steel, natural finish S.S. Safety cable -24 24VDC
for a completely stainless steel fixture. The aluminum fixture has a & Cord connector -48 48VDC
polyester powder coated housing with mounting fittings in natural -CM Chain Mount -225 220V 50 Hz
aluminum. -TG Tempered Glass (FWFN-FWFC) -226 220V 60 Hz
BALLAST: The ballast supplied is H.P.F. 120V, 60 Hz 20W and 40W units -X Polycarbonate Drop Lens -276 277V 60 Hz
are rated for temperatures down to –18°C; 35, 60 and 110W units are
rated for starting in –29°C. Other options available (see below).
No. of Lamp Alum. Weight FWFN Alum. FWN Alum.
FEATURES: The unit is provided with positive-locking spring loaded Description
Lamps Type FWFN – FWN Cat. No. Cat. No.
stainless steel latches for a tight seal between the stainless steel frame and
17 Watt 1 18 lbs. – 18 lbs. FWFN117A FWN117A
the housing. The standard adjustable brackets allow a 110° range of
Rapid Start 2 F17T8 18 lbs. – 18 lbs. FWFN217A FWN217A
mounting positions.
265 MA 24” Lamp 3 20 lbs. – 20 lbs. FWFN317A FWN317A
REFLECTOR: White powder coated aluminum.
20 Watt 1 18 lbs. – 18 lbs. FWFN120A FWN120A
LAMP TYPE: Fluorescent lamps standard, compact fluorescent optional.
Trigger Start 2 F20T12 18 lbs. – 18 lbs. FWFN220A FWN220A
Available in one, two or three lamps.
24” Lamp 3 20 lbs. – 20 lbs. FWFN320A FWN320A
LENS: High impact resistant, drop lens acrylic for FWN series.
32 Watt 1 18 lbs. – 18 lbs. FWFN132A FWN132A
Polycarbonate flat lens for FWFN series.
Rapid Start 2 F32T8 18 lbs. – 18 lbs. FWFN232A FWN232A
OUTLETS: The units are provided with two 3/4” N.P.T. and one plug,
265 MA 48” Lamp 3 20 lbs. – 20 lbs. FWFN332A FWN332A
allowing for thru-feed service where necessary.
35 Watt 1 27 lbs. – 27 lbs. FWFN135A FWN135A
GASKETS: One continuous piece extruded black neoprene gasket which
High Output 2 F24T12/HO 27 lbs. – 27 lbs. FWFN235A FWN235A
provides an effective seal between the lens and the housing, greatly
800 MA 24” Lamp 3 29 lbs. – 29 lbs. FWFN335A FWN335A
reducing light loss and outside contamination by bugs, dirt and moisture.
40 Watt 1 18 lbs. – 18 lbs. FWFN140A FWN140A
OPTIONS: The factory installed options listed below are available by
Rapid Start 2 F40T12 18 lbs. – 18 lbs. FWFN240A FWN240A
adding the following suffix to the catalog number: 1316 for 316 grade
stainless steel, SM for shock mount, SF for surface mount, LL for wall 430 MA 48” Lamp 3 20 lbs. – 20 lbs. FWFN340A FWN340A
mount, PT for pendant mount, TG for tempered glass (FWFN), X for 60 Watt 1 33 lbs. – 33 lbs. FWFN160A FWN160A
polycarbonate drop lens, EM for emergency ballast (1 lamp), EM2 for High Output 2 F48T12/HO 33 lbs. – 33 lbs. FWFN260A FWN260A
emergency ballast (2 lamps), F for fused ballast, 226 for 220V 60 Hz, 800 MA 48” Lamp 3 35 lbs. – 35 lbs. FWFN360A FWN360A
276 for 277V 60 Hz, 225 for 220V 50 Hz, 12 for 12VDC, 24 for 24VDC, COMPACT FLUORESCENT LAMPS
48 for 48VDC. 2 18 lbs. – 18 lbs. FWFC236A FWC236A
• For emergency lighting applications below 0°C, the fixture is factory 36 Watt F39BX
4 28 lbs. – 28 lbs. FWFC436A FWC436A
modified to protect Ni-Cad batteries and emergency lamps from
2 18 lbs. – 18 lbs. FWFC240A FWC240A
temperatures down to –29°C. 40 Watt F40BX
4 28 lbs. – 28 lbs. FWFC440A FWC440A
• Beam clamp mounting kit consists of a beam clamp, a S.S. safety cable
and a cord connector. To order, add suffix “BC” to catalog number. 2 18 lbs. – 18 lbs. FWFC250A FWC250A
50 Watt F50BX
To order the individual components, use part number shown. 4 28 lbs. – 28 lbs. FWFC450A FWC450A
2 18 lbs. – 18 lbs. FWFC255A FWC255A
55 Watt F55BX
4 28 lbs. – 28 lbs. FWFC455A FWC455A
155-05
156-05
741
QS1605
157-05
BUSSMANN
For Class J Dimension Fuses
FUSE REDUCERS 600 Volt No. Lbs. per
100 pair
60 to 30 amp..........................J63.......................3-3/4
Fuse reducers make it possible to use fuses of a smaller size than 100 to 30 amp..........................J13.......................17-1/4
the fuse clips are intended to hold. Reducers fit into any panel or 100 to 60 amp..........................J16.......................18-1/2
switch – even the dead front type where space is restricted. They 200 to 30 amp..........................J23.......................32
200 to 60 amp..........................J26.......................25-1/2
are designed to compensate for dimensional changes resulting from 200 to 100 amp..........................J21.......................13-1/2
normal temperature variations of the fuse or fuseholder. 400 to 100 amp..........................J41.......................49
400 to 200 amp..........................J42.......................27-1/2
600 to 100 amp..........................J61.......................79
For Standard Dimension Fuses 600 to 200 amp..........................J62.......................59-1/2
600 to 400 amp..........................J64.......................35-1/2
Listed by Underwriters’ Laboratories, Inc.
250 Volt No. Lbs. per 600 Volt No. Lbs. per
100 pair 100 pair
60 to 30 amp............................263.......................3-3/4 60 to 30 amp..........................663.......................10
100 to 30 amp............................213.....................17-1/4 100 to 30 amp..........................216.......................17-1/4
100 to 60 amp............................216.....................17-1/4 100 to 60 amp..........................616.......................18-1/2
200 to 60 amp............................226.....................30 200 to 60 amp..........................626.......................33-1/4
200 to 100 amp..........................2621.....................16-1/4 200 to 100 amp........................2621.......................16-1/4
400 to 100 amp..........................2641.....................49 400 to 100 amp........................2641.......................49
400 to 200 amp..........................2642.....................35 400 to 200 amp........................2642.......................35
600 to 100 amp..........................2661.....................87 600 to 100 amp........................2661.......................87
600 to 200 amp..........................2662.....................68-1/2 600 to 200 amp........................2662.......................68-1/2
600 to 400 amp..........................2664.....................44-1/2 600 to 400 amp........................2664.......................44-1/2
The products listed above and below this line are not available from the same manufacturing source.
158-05
CONSTRUCTION: Heavy wall cast bronze or cast aluminum Lamp Type: For alternative lamps add the following suffixes
enclosure. The aluminum units are furnished with a baked white to the catalog number: for a narrow spot, 120V lamp, add
epoxy coating. Both models are supplied with a unique lamp suffix “NSP”; wide flood, 120V lamp, add suffix “WFL”;
suspension system. 28V, 450W medium flood lamp, add suffix “-28”; 12V
DIFFUSER: Clear heat resistant glass lens is standard. 300W medium flood lamp, add suffix “-12”. Handle: For
the model with a handle and hand clamp, add suffix “HDL”.
LAMP TYPE: 120VAC medium flood PAR 56 lamps are furnished.
LAMPHOLDER: Mogul end prong porcelain lampholders
complete with high temperature leads are standard. Low voltage
(12V or 28V) units are screw terminal lamps and are supplied with
high temperature leads wired directly to the lamp. Description Alum. Weight Bronze Cat. No. Alum. Cat. No.
300W Incandescent 55.9 lbs. (25.41 kg) 746B 746A
OUTLETS: Furnished with one 1/2” N.P.T. outlet. Can be supplied
500W Quartz Halogen 55.9 lbs. (25.41 kg) 746BQ 746AQ
with a maximum 3/4” N.P.T.
500W PAR64 Inc. 20 lbs. (9.09 kg) 749B 749A
OPTIONS: Guard: An optional stainless steel wire guard is 1000W PAR64 Qtz Hal. 20 lbs. (9.09 kg) 749BQ 749AQ
supplied when suffix “GRD” is added to the catalog number.
CONSTRUCTION: Heavy wall cast brass or copper-free OPTIONS: Guard: An optional cast guard is supplied when the
aluminum designed for locations where flammable gases or suffix “GRD” is added to the catalog number. Globe: For color
corrosive atmospheres are usually present. globes add suffix “RED”, “BLU”, “GRN” or “YEL”. Outlets: Junction
LAMP TYPE: A T4 100W Quartz halogen lamp of the appropriate box and bulkhead models can be supplied with a maximum of four
supply voltage is included. 1” N.P.T. holes on application. Pendant models can be supplied
GLOBE: Heat and impact resistant explosion proof glass globe with a maximum of one 1” N.P.T. hole on application.
is furnished.
OUTLETS: Furnished with one 1/2” N.P.T. outlet. Bronze Bronze Aluminum
Description
Weight Cat. No. Cat. No.
INTERIOR: A 120VAC interior is furnished with the catalog
Junction box type 51.0 lbs. (23.18 kg) EPC7004B EPC7004A
numbers shown. The fixtures can be supplied in 240VAC
Pendant type 49.5 lbs. (22.50 kg) EPP7004B EPP7004A
by adding the suffix “-4”,12VDC and 24VDC with suffix
Bulkhead type 56.5 lbs. (25.68 kg) EPB7004B EPB7004A
“-5” and “-6”.
159-05
717AQ7D2
727AM7D2
707AM7D2
CONSTRUCTION: Rugged heavy wall cast brass or cast OPTIONS: Globe: A fluted globe available on request.
aluminum housings. All fixtures are designed to prevent the Lampholder: A shock-proof lampholder is available on request
entrance of dirt, moisture and corrosive vapors into the interior (INX4000SP).
of the fixtures. Lamp Bronze Bronze Aluminum
Description
FINISH: Natural casting is standard. Size Weight Cat. No. Cat. No.
TERMINAL BLOCK: A four wire terminal block is furnished in the Ceiling mount 150W
6.25 lbs. (2.84 kg) 717BM7D2 717AM7D2
fixture’s junction box. round box A-21
Ceiling mount 150W
LAMP TYPE: Maximum 150W A-21 lamp size (not included with 7.50 lbs. (3.41 kg) 717BQ7D2 717AQ7D2
square box A-21
the fixture).
Bulkhead mount 150W
LAMPHOLDER: Phenolic with a nickel-plated copper screw shell. 7.751b (3.52 kg) 707BM7D2 707AM7D2
round box A-21
GLOBE: Clear glass is standard. Bulkhead mount 150W
7.75 lbs. (3.41 kg) 707BQ7D2 707AQ7D2
OUTLETS: Junction box units are supplied drilled and tapped 3/4” square box A-21
N.P.T. four-way with three plugs. Drilling and tapping, other than 150W
Pendant mount 6.50 lbs. (2.95 kg) 727BM7D2 727AM7D2
standard, can be supplied on application with three plugs, or to A-21
specification.
1158AD2 1159AD2
CONSTRUCTION: Heavy wall cast brass or cast aluminum (Cat. No. CX3070), (Box type only). Lampholder: Porcelain
enclosure and guard. Natural finish is standard. The unique available, (Cat. No. INX4000P) shock and vibration
double-gasketed design prevents the entrance of water far in proof available on all lampholders, add suffix “SP”
excess of U.L. requirements for water tightness. (Cat. No. INX4000SP). Outlet: The fixtures can be supplied with
LAMP TYPE: 100W A-19 max. for CLR, YEL, GRN & RED. 40W up to four 1” N.P.T. holes. The pendant model can be supplied
max. with up to one 1” N.P.T. mounting hole. Drilling and tapping,
A-19 for BLU (not included with the fixtures). other than standard, can be supplied on application. Globe: For
color globes add suffix “RED”, “BLU”, “GRN” or“YEL”.
LAMPHOLDER: Medium base with a nickel-plated copper
screw shell. Lamp
Bronze Bronze Aluminum
Weight Cat. No. Cat. No.
MOUNTING: The junction box model has two external mounting
legs. Pendant models have one 1/2” N.P.T. hole in the center Pendant mount 7 lbs. 1158BCLRD2 1158ACLRD2
(3.12 kg)
of the box.
8 lbs.
OUTLETS: The junction box model is supplied drilled and tapped Junction box mount 1159BCLRD2 1159ACLRD2
(3.62 kg)
with one 1/2” N.P.T. one way. Pendant mount 8 lbs.
1158BCLRGRDD2 1158ACLRGRDD2
GLOBE: Clear high impact fresnel glass globe is standard. with guard (3.62 kg)
OPTIONS: Finish: Finishes other than natural are available on Junction box mount 9 lbs
1159BCLRGRDD2 1159ACLRGRDD2
with guard (4.08 kg)
request. Terminal Block: Add suffix “T” for a four wire block
160-05
EXPLOSIONPROOF OPTIONS:
CONSTRUCTION: Heavy wall copper-free cast aluminum or brass Globe: For a color fresneI interior globe add suffix
designed for locations where flammable gases or corrosive atmospheres RED, BLU, GRN or YEL to the catalog number.
are usually present. The aluminum fixtures are supplied with red powder Circuit Board: A variety of optional primary voltages
coating as standard. are supplied with a dash number suffix: 12VDC, “-5”;
LAMP TYPE: A xenon strobe lamp is included. 24VDC, “-6”; 240VAC, 50 Hz or 60 Hz “-4”.
GUARD: Heavy web cast brass or aluminum. Guards are furnished as
Outlets: The junction box and bulkhead models can be
supplied with a maximum of four 1” N.P.T. holes on
standard.
application. The pendant models can be supplied
GLOBE: A clear heat and impact resistant explosion proof glass with a with a maximum of one 3/4” N.P.T. hole.
smooth exterior. An interior clear fresnel globe is furnished in the catalog EPN7000A
numbers shown. Description Bronze Bronze Aluminum
Weight Cat. No. Cat. No.
CIRCUIT BOARD: Furnished with 120VAC, 50 Hz or 60 Hz and a plastic
fresnel globe. The flash rate of the standard unit is factory adjusted from Junction Box Type 22 lbs. (10.00 kg) EPN7000B EPN7000A
60 to 90 flashes per minute. Pendant Type 20 lbs. (9.09 kg) EPN7001B EPN7001A
OUTLETS: All units are furnished with one 1/2” N.P.T. hole. Bulkhead Type 29 lbs. (13.18 kg) EPN7002B EPN7002A
WATERPROOF
CONSTRUCTION: Heavy wall cast brass or cast aluminum with natural OUTLETS: All models are supplied drilled and tapped
finish. 1/2” N.P.T. The fixture can be supplied with up to 1”
GLOBE: Clear high impact fresnel glass globe is standard (Cat. No. N.P.T. mounting hole. The junction box model is
INX2058CLR ). For color globes add suffix RED, BLU, GRN or YEL. furnished with 3/4”.
GUARD: A guard is not provided on standard unit. Add suffix GRD Max 1” N.P.T. fourway.
for heavy cast brass or aluminum guard (INX1004). LAMP: A xenon strobe lamp is included (INX3724).
CIRCUIT BOARD: The catalog numbers shown are furnished with input TERMINAL BLOCK: Add suffix T for a 4-wire block for
circuit boards 120VAC, 240VAC or 12-48VDC. The flash rate of the box type only .
standard unit is factory adjusted in a range of 75 to 85 flashes/min.
7120AC
Lamp Globe Bronze Weight Bronze Cat. No. Guard Aluminum Cat. No. Guard
Xenon Strobe Stem Mount INX2058CLR 8 lbs. (3.60 kg) 7120BC INX1004B 7120AC INX1004A
Xenon Strobe Box Type INX2058CLR 9 lbs. (4.05 kg) 7121BC INX1004B 7121AC INX1004A
161-05
CATALOG CHART
1 2 3 4 5 6 7 8
1 I = incandescent 4 Mounting 6 Arrow Direction 7 EM = Emergency Ballast
F = fluorescent W = wall BLANK = no arrow
C = ceiling EXER = emergency exit 8 Input Voltage
2 Number Of Faces WF = wall recessed AR = right arrow BLANK = 120V 60 Hz
1 = single face CF = ceiling recessed AL = left arrow 226 = 220V 60 Hz
2 = double face DA = dual arrow 225 = 220V 50 Hz
5 Letters/Background DAU = dual arrow up 276 = 277V 60 Hz
RW = red on white AURS = arrow up right side
3 Material GW = green on white AULS = arrow up left side
A = Aluminum
162-05
1449A
1440ANS*
163-05
CONSTRUCTION: These units are made from impact and LAMPHOLDER: Polycarbonate lampholders supplied with
corrosion resistant, reinforced polyester with a T3C and compact fluorescents. Incandescent and high pressure
T3 temperature rating. They are designed to handle harsh sodium lamps are supplied with porcelain lampholders.
marine environments. GUARD: Non metallic guard is standard. An optional
VOLTAGE: All fixtures are supplied to operate at 120VAC stainless steel wire guard is available.
60Hz as standard. Compact fluorescent units only can be OUTLETS: Junction boxes on the ceiling and wall mount
supplied to operate on 277VAC 60Hz. versions are supplied with four 3/4” N.P.T. knockouts. The
MOUNTINGS: Ceiling mount, pendant mount and wall pendant unit is mounted by one 3/4” N.P.T. outlet.
mount. REFLECTOR: A prismatic reflector is optional, but cannot
GLOBE: A clear glass globe is provided as standard. be used with a wire guard.
Optional colored globes, amber, blue, green and red. GASKET: A one piece silicone gasket which protects
Polycarbonate globe and tempered glass globes are also against water intrusion.
available. APPROVALS: Class I Div 2, Class II Div 2, Class III, USCG
accepted, CSA and ABS. Temperature rating T3C and T3.
Incandescent 700 701 702 150W max 120VAC 60Hz Standard – Clear Globe
250V 50/60Hz (only) Amber
Blue
High Pressure S700 S701 S702 35W, 50W 120VAC 60Hz Green
Sodium Red
Tempered Glass
Compact F700 F701 F702 9W, 13W, 120VAC 60Hz Polycarbonate
Fluorescent 18W, 26W, 277V 60Hz (only) Stainless Steel Wire Guard
32W, and 35W Prismatic Reflector
BECK ELECTRIC
SUPPLY Wilmington, California
Phone: 310-834-1151
Fax: 310-834-1208
Richmond, California
Phone: 510-215-9499
Fax: 510-215-7889
Seattle, Washington
Phone: 206-763-2011
Fax: 206-767-9219
www.beckelectric.com E-mail: socalsales@beckelectric.com E-mail: casales@beckelectric.com E-mail: wasales@beckelectric.com
0162-04 4/28/05 8:55 AM Page 1
164-05
CONSTRUCTION: Heavy duty wall cast brass or copper free marine grade aluminum.
Specify material by adding the suffix “A” for aluminum or “B” for bronze after catalog number.
OUTLETS: Standard is undrilled. Available up to maximum of 1” N.P.T. fourway.
LAMPS: Compact fluorescent lamps are included. Specify wattage by adding suffix -13, -18 or -26 for 13W, 18W or 26W lamps.
OPTIONS: Terminal Block – Add suffix T for a 4 wire block (Cat. No. CX3070), add suffix T-6 for a 6 wire block (Cat. No. CX3076).
Globe – Clear glass globe is standard. For color globes add suffix RED, BLU, GRN or YEL.
165-05
FPS220
Cross Section
No. of Lamp Available in one, two and three lamp units (35W & 60W fixtures available in
Description Lamps Type Weight FPS one and two only). The fixture is watertight.
17W Rapid Start 1 8-1/4 lbs. FPS117D2
265 MA 2 F17T8 8-1/2 lbs. FPS217D2
24” Lamp 3 13 lbs. FPS317D2
HOUSING: Glass reinforced polyester with a natural grey finish.
20W 1 9-3/4 lbs. FPS120D2 LATCHES: Stainless steel.
Trigger Start 2 F20T12 10 lbs. FPS220D2 REFLECTOR: White powder coated aluminum.
24” Lamp 3 13-1/2 lbs. FPS320D2
32W Rapid Start 1 12-3/4 lbs. FPS132D2 OUTLETS: All units are supplied with two 3⁄4” NPT outlets, one plugged,
265 MA 2 F32T8 13-1/4 lbs. FPS232D2 providing a through-feed service where required.
48” Lamp 3 14-1/2 lbs. FPS332D2
GASKETS: One continuous piece extruded neoprene gasket provides an
35W High Output 1 13-3/4 lbs. FPS135D2
800 MA 2 F24T12 14 lbs. FPS235D2 effective seal between the lens and housing.
24” Lamp 3 /HO N/A N/A MOUNTING: Through 4 13/32" center point mounting holes provided on the
40W Rapid Start 1 14-1/4 lbs. FPS140D2 stainless steel mounting legs.
430 MA 2 F40T12 14-1/2 lbs. FPS240D2
48” Lamp 3 18-1/2 lbs. FPS340D2 LAMPHOLDER: Spring loaded lampholders provide a positive contact and
60W High Output 1 18-1/4 lbs. FPS160D2 maximum resistance to shock and vibration.
800 MA 2 F48T12 18-1/2 lbs. FPS260D2 BALLAST: An HPF120V 60Hz ballast is supplied as standard. 17W, 20W,
48” Lamp 3 /HO N/A FPS360D2
40W Single Ended 2 F40W/ 9-3/4 lbs. FPSC240D2
32W, 40W and 55W fixtures are rated for starting in temperatures down to 0°F
Compact 2G11 (-18°C) and 35W and 60W fixtures in temperatures down to -20°F (-29°C).
Fluorescent 4 18-1/2 lbs. FPSC440D2 LAMP TYPE: T8 and T12 fluorescent lamps as standard dependant on wattage.
55W Single Ended 2 F58W/ 9.7 lbs. FPSC255D2 All fixtures other than compact fluorescent types are supplied without lamps.
Compact Fluorescent 4 2G11 18.5 lbs. FPSC455D2
Compact fluorescent versions are available in two lamp and four lamp 40W
fixtures.
LENS: High impact matte acrylic diffuser. Optional clear polycarbonate also
available.
OPTIONS: Phenolic Terminal Block, Access Plate, Clear Polycarbonate Drop
Lens, Emergency Ballast, 220V 50Hz, 220V 60Hz and 277V 60Hz Ballasts.
Dimensions A B C
FPS 120, FPS 220, FPS 320 29 7-9/16 4-3/4
FPS 140, FPS 240, FPS 340 53 7-9/16 4-3/4
BECK ELECTRIC
SUPPLY Wilmington, California
Phone: 310-834-1151
Fax: 310-834-1208
Richmond, California
Phone: 510-215-9499
Fax: 510-215-7889
Seattle, Washington
Phone: 206-763-2011
Fax: 206-767-9219
www.beckelectric.com E-mail: socalsales@beckelectric.com E-mail: casales@beckelectric.com E-mail: wasales@beckelectric.com
0164-03 4/28/05 8:58 AM Page 1
166-05
LATCHES: Over the center stainless steel cam latches. LAMP TYPE: All fixtures other than compact fluorescent
REFLECTOR: White powder coated aluminum. types are supplied without lamps. Compact fluorescent
OUTLETS: All units are supplied with two 3⁄4 “ NPT outlets, versions are available in two lamp and four lamp 40W
one plugged, providing a through-feed service where fixtures.
required. LENS: High impact matte acrylic lens. Optional clear
GASKETS: One continuous piece extruded neoprene gasket polycarbonate also available.
provides an effective seal between the lens and housing. OPTIONS: Phenolic Terminal Block, Access Plate, Clear
LAMPHOLDER: Spring loaded lampholders provide a Polycarbonate Drop Lens, Emergency Ballast, 220V
positive contact and maximum resistance to shock and 50Hz, 220V 60Hz and 277V 60Hz Ballasts, Water Tight
vibration. at zero degrees.
BALLAST: An HPF120V 60Hz ballast is supplied as standard.
www.manning-electric.com
Stocking Distributor for
Pauluhn Electric Mfg., LLP
154 27 th Street — Brooklyn, NY 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
0165-04 4/28/05 8:59 AM Page 1
167-05
168-05
169-05
FLUORESCENT BERTH
& MIRROR LIGHTS
Flush Or Surface Mount, Vertical or Horizontal
FLUORESCENT BERTH
U.S.C.G. Accepted, U.L. Listed 1570 Fluorescent & MIRROR LIGHT
120VAC or 220VAC Surface Mount, U.S.C.G. Accepted
2 – 8W Lamp U.L. Listed 1570 Fluorescent,
120VAC or 220VAC
1-15W Lamp
F1061
1 Lamp—FBN18 1 Lamp—FMN18
2 Lamp—FBN28 2 Lamp—FMN28
CONSTRUCTION: Corrosion resistant aluminum housing. CONSTRUCTION: Corrosion resistant aluminum with a powder
OUTLETS: All units supplied with one 1/2” and 3/4” KO. coated anodized type finish.
REFLECTOR: Aluminum with a white high gloss polyester powder SHADE: An adjustable shade is provided.
coated finish. SWITCH/STARTER: A double pole rocker is provided.
LENS: A high impact fluted acrylic lens provided. CONVENIENCE OUTLET: A 125V 2 wire 3 pole “U” ground
BALLAST: Low power factor, pre-heat supplied standard. supplied standard. Can be furnished less outlet on request.
SWITCH/STARTER: Push type momentary contact. VOLTAGE: Specify 120VAC or 220VAC.
LAMPS: Two 8W fluorescent lamps. Lamps are included. OVERALL DIMENSIONS: 19-1/4” long x 3” wide x 5-5/8” deep.
DIMENSIONS: 14-3/8” long, 4-1/4” high, 3-1/2” wide.
VOLTAGE: 120VAC 60 Hz standard.
170-05
171-05
FB28FADJ
w/ Adjustable Shade
FDA220PER
CONSTRUCTION: Corrosion resistant polyester powder coated steel CONSTRUCTION: Marine grade copper free aluminum, non-corrosive
housings. Standard is white finish, optional "color match" to ceiling can be anodized type, polyester powder coated frame with a white, high gloss
specified. polyester powder coated reflector.
DIFFUSER: Acrylic clear prismatic is standard, optional "color match" to
SWITCH / STARTER: Push type momentary contact switch is standard.
frame can be specified.
A double pole toggle switch is optional.
LAMPS: Choice of two lamps in 17W, 20W, 32W or 40W.
TERMINAL BLOCK: A phenolic terminal block is supplied with the fixture DIFFUSER: Clear fluted lens for increased light distribution.
for convenience and ease of wiring. LAMPS: 1 or 2 fluorescent 8W F8T5. Lamp is included with this fixture.
BALLAST: The standard ballast supplied is HPF, 120V AC , 60 Hz. An ADJUSTABLE SHADE: Add suffix “ADJ“ to Catalog No.
optional Emergency Ballast "EM" is available.
BALLAST: Low power factor 120V 60 Hz is standard. Other voltages and
LAMPHOLDER: Locking lampholders provide maximum resistance to 50 Hz are available on application.
shock and vibration.
MOUNTING: The FDA models are designed to integrate with modular CONVENIENCE OUTLET: A 125V 3 wire – 2 pole “U” ground is standard.
continuous ceiling systems. The suffix "PAR" is for fixtures that mount For a fixture without the receptacle add suffix “LCO”.
parallel to the ceiling frames, the suffix "PER" is for fixtures that mount Description Lamp Size Alum. Weight Alum. Cat. No.
perpendicular to the ceiling frames. (1) F8T5 / CW FB18F
Fluorescent Recessed 3-1/2 lbs. (1.59 kg)
(2) F8T5 / CW FB28F
Description Lamp Size Weight Catalog No.
2 x 17W 14 lbs. FDA217PAR
Parallel Type
2 x 20W 15 Ibs. FDA220PAR
2 x 32W 23 lbs. FDA232PAR EXPLOSION PROOF SCREW COVER
2 x 40W
2 x 17W
23 lbs.
15 lbs.
FDA240PAR
FDA217PER JUNCTION BOX
Perpendicular Type
2 x 20W 16 lbs. FDA220PER U.L. 498, NEMA 4X & 7 U.S.C.G.
2 x 32W 25 lbs. FDA232PER
2 x 40W 25 lbs. FDA240PER Class I Groups C & D – Class II Groups E, F & G
INX1506BCG
5-11/16
CONSTRUCTION: Marine grade brass or copper free
aluminum bodies and gland nuts, Supplied complete
with neoprene grommets to make hole sizes shown under
grip range. The gland nut is hex shaped for easy tightening.
APPLICATION: ACG and BCG series cable glands are for use with
portable cords and types MV (unarmored), SE, PLTC (round), TC and EPJ505A
UF cables. Designed to grip the cable and create a watertight seal around
cable entrance into a junction box or a bulkhead. Ø5/16
4 MTG HOLES
ON 5” B.C.
Grommet Dia. Grip Brass Aluminum
Description N.P.T.
Cat. No. Bore Range Cat. No. Cat. No.
GKT7018 .312 – .375 CONSTRUCTION: Heavy wall marine grade cast brass or aluminum box
Cable Gland 1/2” GKT7019 .562 .375 – .437 INX1502BCG INX1502ACG and cover. The EPJ505 is designed for locations where flammable gases or
GKT7020 .437 – .500 dusts are usually present.
GKT7021 .437 – .562
OUTLETS: This junction box is supplied with one 1/2” N.P.T. opening.
Cable Gland 3/4" GKT7022 .750 .562 – .687 INX1506BCG INX1506ACG
It can be supplied with one to four openings for pipe sizes up to 1” N.P.T.
GKT7023 .687 – .750
GKT7024 .750 – .875 Description Bronze Weight Bronze Cat. No. Alum. Cat. No.
Cable Gland 1” 1.000 INX1508BCG INX1508ACG
GKT7025 .812 – .937 Screw Cover Junction Box 5 lbs. (2.27 kg) EPJ505B EPJ505A
172-05
Receptacles
Circuit Breakers
Catalog No. Max. I.P.S. SINGLE RECEPTACLE NO. 6000B: Single pole, 300 Amp positive-
Poles & Volts Trip Amps lock screw cap. Supplied less outlets standard. Can be supplied up
15 2460A 1-1/4” to 1” I.P.S. Overall Dimensions: 6-1/2“ x 4-1/8” x 5-1/4”.
50 AMPS 2 Pole 20 2462A 1-1/4”
2 Pole 480VAC 30 2464A 1-1/4” DOUBLE RECEPTACLE NO. 6583B: Two single poles, 300 amp
3 Wire *250VDC 30 2466A 1-1/4" (each), positive-lock screw cap. Supplied less outlets standard.
50 2468A 1-1/4” Can be supplied up to 1” I.P.S.
50 AMPS 15 2470A 1-1/4” Overall Dimensions: 12” x 10” x 6-3/4”.
3 Pole 20 2472A 1-1/4”
3 Pole PLUG MALE NO. 6000 PB: Maximum cable diameter 3/4”.
4 Wire 30 2474A 1-1/4”
4th wire 480VAC
30 2476A 1-1/4” CONSTRUCTION: Both receptacles and plugs composed of
for ground 50 2478 1-1/4” copper free cast aluminum. Cast brass available on request.
*When required for D.C. add suffix “D.C.” to catalog number. Plug and receptacle interiors composed of nylon.
173-05
2715B 2716B
CONSTRUCTION: Enclosure constructed of copper free cast CONSTRUCTION: Enclosure constructed of copper free cast
aluminum, cast brass, or non-metallic. aluminum, cast brass, or non-metallic.
OUTLETS: Supplied blank standard. Can be supplied up OUTLETS: Supplied blank standard. Can be supplied up to two
to two 3/4” N.P.T. outlets. 3/4" N.P.T. outlets.
OVERALL DIMENSIONS: 4-1/2” high x 2” deep x 2-3/4” wide. OVERALL DIMENSIONS: 4-1/2” high x 2” deep x 2-3/4” wide.
Description 2W3P Receptacle Cat. No. Brass Cat. No. Aluminum Description Cat. No. Brass Cat. No. Aluminum
With Single Pole Switch 2715B 2715A 15 Amp Single Pole Switch
2716B 2716A
Two Switches 2717B 2717A And 1/4W 125V pilot light
174-05
M506 Series Twin Fluorescent Detail Light Fixture – Surface or Corner Mount
M506 Series is available with a duplex receptacle or a single
receptacle with a toggle switch.
HOUSING: Manufactured of marine grade aluminum.
LENS FRAME: Manufactured of marine grade aluminum.
Hinged the full length on one side, and latched with two spring
loaded quarter turn fasteners for easy access to lamps and
maintenance of the fixture.
Applications: Mirror lighting fixture, work stations, crew LENS: One piece flat 1/8” thick prismatic acrylic
quarters, corridors / stairwells
LAMP HOLDERS: Fluorescent lampholders are installed with
Optional Stuffing Tube, Convenience Receptacles spring loaded lampsocket devices to hold the lamps securely in
U.L. Listed 1598A Marine, U.S.C.G. - ABS position.
How To Order Example: M506-20-SJO FINISH: White, powder coat finish, inside and out, phosphate
pretreated to ensure superior adhesion and rust resistance.
SERIES LAMP TYPE FEATURES OPTIONAL BALLAST: HPF type. Operates at 120 volt, 60 Hertz.
20 = 20W T12 (2 ft.) A = Duplex Receptacle SJO = 10 ft. of 16/3
40 = 40W T12 (4ft.) B = Single Receptacle cable Weight: = 15 Lbs. (7kg)
For use with receptacle and/or switch with DPST Toggle ST = Stuffing Tube
15 = 15W T12 (2 ft.) Switch
Modifications are available to suit custom requirements
30 = 30W T12 (4 ft.)
175-05
M711 Series universal mounting brackets are designed to allow UL 1598A Marine
either perpendicular or parallel installation. One fixture does U.S.C.G. - ABS
both jobs.
HOUSING: Cold rolled steel. Fits suspended ceiling systems
using standard 11-13/16" (300mm) linear ceiling panels with
1" (25mm) recess. Gap between housing and door on all sides
provides clearance for ceiling panel lip, thus eliminating on-site
ceiling panel notching.
176-05
Service Application:
The Alternating Power Outlet (APO) is a portable power distribution box which provides an alternative means of powering reefer or
tank containers when there is a shortage of outlets. The APO is designed for outdoor use and is available with any of the standard reefer
electrical configurations from 30-60 Amps and 250-480 Volts. The APO is comprised of an enclosure with two female fixed receptacles
and a single male plug attached with a short length of flexible cable. When the connections are secured and the power is engaged then
the two female receptacles are energized on an alternating basis, with the on/off time interval set by the user to be any time between
5 minutes and three hours. Both container plugs remain permanently connected to the APO but only one receptacle is energized at
any given time. This means that the upstream circuit is not overloaded, which can occur with Y-cords or common distribution boxes.
• Non-skid feet minimize shifting and elevate enclosure above standing water.
?? ?
Having trouble finding THE PRODUCTS
177-05
FIXED RECEPTACLE WITH BACK BOX FIXED RECEPTACLE WITH BACK BOX AND
30 AMP, 3 Pole, 4 Wire, 250 VAC
Molded Polyamide Receptacle Housing with Copper-free
ANGLE ADAPTER
Aluminum Back Box. 30 AMP, 3 Pole, 4 Wire, 250 VAC
3034FRXTS + SAM50 + JM99 Molded Polyamide Receptacle Housing with Copper-free
Aluminum Back Box and Angle Adapter.
3034FRXTS + AM50 + JM99
FIXED RECEPTACLE WITH BACK BOX FIXED RECEPTACLE WITH ANGLE ADAPTER
32 AMP, 3 Pole, 4 Wire, 480 VAC AND BACK BOX
Polycarbonate Receptacle Housing with 32 AMP, 3 Pole, 4 Wire, 480 VAC
Copper-free Aluminum Back Box. Polycarbonate Receptacle Housing with Copper-free
3334FRVF + SAM32 + JM99 Aluminum Angle Adapter and Back Box.
3334FRVF + AM32 + JM99
www.manning-electric.com
Stocking Distributor for
MIPCO Russellstoll ®
TM
Thomas & Betts
154 27 th Street — Brooklyn, NY 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
0178-04 4/28/05 9:10 AM Page 179
178-05
Features:
• Thermoplastic housings are watertight when mated, non-conductive
and resistant to damage and corrosion in harsh environments.
• Shrouded brass sleeves on the connector are protected from abuse
for long life and reliable electrical contact. 3809P (Connector) & 3799PA (Male Inlet)
• Neoprene sealing glands on the connector for a watertight seal Thermoplastic Housings
at cable entrance.
• Pins on the male inlet have O-rings for added waterproofing.
Service Application:
• Distributed Power: Barges – Pumps, Nav lights, extension cords
Generators – remote machinery & lighting
• Industrial Machinery: Portable batch process equipment
Reverse service safety installations
Specifications:
1.0 Style 2P + G
2.0 Rating 30 Amp, 250 V; 20 Amp, 600 VAC
3.0 Terminals
3.1 Contacts Male Inlet: pins (3)/Connector: sleeves
3.2 Connection Male Inlet: pressure screws/Connector: binding head screws
3.3 Interior Markings 1, 2 and G-Ground
4.0 Collar Connector: Locking screw collar
5.0 Flap Cover Male Inlet: Spring activated, gasketed
6.0 Entry Type Maximum 1” NPT conduit for junction box
7.0 Materials
7.1 Housing, Gland Nut, High impact polycarbonate
Flap Cover, Screw Collar
7.2 Interior Molded thermoset
7.3 Contact Pins Brass
7.4 Gaskets Neoprene
7.5 O-rings Male Inlet: Buna-N (Nitrile)
7.6 External Fasteners Stainless Steel
2.3"
58.4 mm
?? ?
Having trouble finding THE PRODUCTS
179-05
180-05
HBL503RI
HBL77CM74WO
HBL7774WO
HBL61CM53 HBL61CM53W
HBL61CM43 HBL61CM43W
HBL503NM
HBL63CM61
HBL63CM60
HBL63CM70
S750
HBL77CM16
HBL503SS HBL77CM15 HBL77CM17
HBL503RI – Stylized type 316 HBL503SS – Metallic, traditional style HBL77CM67* – Nickel plated brass HBL63CM61 – Nickel plated brass
stainless steel shore power inlet has shore power inlet has gasketed, self- cord clamp assembly with clamp plug has heat resistant thermoset
easy to use push-button latch that closing cover so interior is shielded range of .437-1.140” (11.1-29.0) interior and combination metal and
makes unit watertight when fully from the elements when not in use. provides strain relief for terminations rubber cord grip, provides superior
engaged. Interior is heat resistant Watertight when cover is securely on #HBL63CM72. strain relief capability. Cord grip
thermoset material and has box lug fastened. Mounting holes are 2-3⁄8” HBL77CM17 – Yellow Seal-Tite range is .437-1.140” (11.1-29.0).
terminals. Mounting holes are 2-3⁄8” (60.3) on centers, and rear portion has cover for weatherproofing connector HBL77CM16 – Yellow Seal-Tite®
(60.3) on centers and match existing 2.171” (55.1) diameter. Mounting bodies on extension cords or cover for weatherproofing plugs.
mounting patterns. Mounting screws screws and gasket included. adapters. IP55 suitability. IP55 suitability.
and gasket included. CR16277* – Replacement HBL61CM53 – 50’ (15.2m) yellow HBL63CM70 – Single receptacle
HBL503NM – Stylized non-metallic interior for #HBL63CM72 and vinyl jacketed shore power cable has a heat resistant thermoset base.
shore power inlet has UV resistant #HBL503SS shore power inlets. set. #6AWG, completely factory
white Centrex cover which makes pre-wired with molded-on devices. HBL77CM74WO – Yellow poly-
HBL63CM60 – Nickel plated brass
unit weatherproof when completely Connector end has threaded sealing carbonate lift cover plate for
connector body has heat resistant
closed. Interior is heat resistant ring to make inlet/connector weatherproofing 50A receptacles.
thermoset interior and combination
thermoset material and has box lug interface watertight. Meets requirements of the most
metal and rubber cord grip provides
terminals. Mounting holes are 2-3⁄8” HBL61CM53W – Same as stringent of UL’s three listing
superior strain relief capability. Cord
(60.3) on centers and match existing #HBL61CM53 except in white. categories for weatherproof plates.
grip range is .437-1.140” (11.1-29.0).
mounting patterns. Mounting screws Stainless steel screws and a
HBL77CM15 – Yellow Seal-Tite® HBL61CM43 – Same as #HBL61CM53,
and gasket included. neoprene gasket included. For
except 25’ (7.6m) in length.
cover for connector bodies when mounting to FS/FD type
SR3050* – Protective rear cover for HBL61CM43W – Same as
used with shore power inlets. weatherproof boxes. IP44 suitability.
all inlets. Secures to back of inlets #HBL61CM43 except in white.
Threaded sealing ring makes con-
with 3 screws which are provided. HBL7774WO – Same as
nections watertight. IP55 suitability. YC306250* – 3 conductor, #6AWG
#HBL77CM74WO except gray
type STO, yellow PVC jacketed
HBL60CM75* – Nickel plated brass in color. IP44 suitability.
portable cord with jute fillers for
adapter plate for mounting chrome
added flexibility. Ideal for making S750 – Stainless steel wallplate
plated brass shore power inlets to
cable sets, extension cords, and for 50A receptacle.
FS/FD box.
adapters and will not mark boat’s
*Not Shown deck. 250’ (76.2m) lengths only.
?? ?
Having trouble finding THE PRODUCTS
181-05
W
G
HBL504RI
HBL504SS
HBL61CM52 HBL61CM52W
HBL61CM42 HBL61CM42W
HBL504NM
HBL77CM17 HBL63CM69
HBL77CM15
HBL77CM74WO
HBL7774WO
S750
HBL63CM64 HBL77CM16 HBL63CM65
HBL504RI – Stylized type 316 holes are 2-3⁄8" (60.3) HBL77CM17 – Yellow Seal-Tite HBL63CM65 – Nickel plated brass
stainless steel shore power inlet has on centers, and the rear portion has cover for weatherproofing connector plug has a heat resistant thermoset
easy to use push-button latch that a 2.171" (55.1) diameter. Mounting bodies when used on extension interior and combination metal and
makes unit watertight when fully screws and gasket are included. cords or adapters. IP55 suitability. rubber cord grip, which provides
engaged. Interior is heat resistant CR16279* – Replacement superior strain relief capability.
thermoset material and has box lug HBL61CM52 – 50' (15.2m) yellow
interior for #HBL63CM74 and vinyl jacketed shore power cable set. Cord grip range is .437-1.140"
terminals. Mounting holes are 2-3⁄8" #HBL504SS shore power inlets. (11.1-29.0).
(60.3) on centers and match existing #6 AWG is completely factory
mounting patterns. Mounting screws HBL63CM64 – Nickel plated brass pre-wired with molded-on devices. HBL77CM16 – Yellow Seal-Tite®
and gasket included. connector body has a heat resistant The connector end has a threaded cover for weatherproofing plugs.
thermoset interior and combination sealing ring for making the inlet/ IP44 suitability.
HBL504NM – Stylized non-metallic metal and rubber cord grip, which
shore power inlet has UV resistant connector interface watertight.
provides superior strain relief HBL63CM69 – Single receptacle
white Centrex cover which makes capability. Cord grip range is HBL61CM52W – Same as has a heat resistant thermoset base.
unit weatherproof when completely .437-1.140" (11.1-29.0). #HBL61CM52 except in white.
closed. Interior is heat resistant HBL77CM74WO – Yellow
thermoset material and has box lug HBL77CM15 – Yellow Seal-Tite® HBL61CM42 – Same as #HBL61CM52 polycarbonate lift cover plate for
terminals. Mounting holes are 2-3⁄8" cover for connector bodies when except 25' (7.6m) in length. weatherproofing 50A receptacles.
(60.3) on centers and match existing used with shore power inlets.
HBL61CM42W – Same as It meets the requirements of the
mounting patterns. Mounting screws Threaded sealing ring makes
#HBL61CM42 except in white. most stringent of UL’s three listing
and gasket included. connection watertight.
IP55 suitability. categories for weatherproof plates.
SR3050* – Protective rear cap for all YC406250* – Four conductor, Stainless steel screws and a
inlets. Secures to back of inlet with HBL60CM75* – Nickel plated brass #6AWG type STO, yellow PVC neoprene gasket are included for
3 screws which are provided. adapter plate for mounting chrome jacketed portable cord with jute mounting. Made for mounting to
plated brass shore power inlets to a fillers for added flexibility is ideal for
HBL504SS – Metallic, traditional FS/FD type weatherproof boxes.
FS/FD box.
style shore power inlet has a making cable sets, extension cords, IP55 suitability.
gasketed, self-closing cover so that HBL77CM67* – Nickel plated brass and adapters as it will not mark the
cord clamp assembly with a clamp boat’s deck. Available in 250' HBL7774WO – Same as
the interior is shielded from the
range of .437-1.140" (11.1-29.0) (76.2m) lengths only. #HBL77CM74WO except
elements when not in use. It is
watertight when the cover is provides strain relief for terminations gray in color. IP55 suitability.
securely fastened. The mounting on shore power inlets.
S750 – Stainless steel wallplate
for 50A receptacle.
*Not Shown
?? ?
Having trouble finding THE PRODUCTS
182-05
HBL52CM66C
HBL60CM24
HBL60CM23
HBL74CM23WO
HBL7423WO
HBL52CM61 HBL52CM62
HBL61CM64
HBL47CM20C HBL52CM21
HBL52CM80C HBL52CM69C HBL5221
HBL47CM00
HBL52CM61 – Yellow single recep- HBL61CM64 – Compact gray nylon
tacle features heat resistant melamine panel mount inlet ideal for bass boat
body and abuse resistant nylon face. battery charging connection. Has
HBL52CM62 – Yellow duplex recep- gasketed spring-loaded lift cover for
tacle features heat resistant melamine weatherproofing front and neoprene
body and abuse resistant nylon face. boot for weatherproofing rear. Will
HBL52CM66C – Yellow Insulgrip® accept both 15A 125V and 20A
125V 2 pole, 3 wire straight blade HBL47CM15 HBL47CM29C HBL47CM16
plug has rugged nylon housing and
detachable cord grip with range of connector bodies.
HBL47CM00 – Yellow duplex recep- HBL47CM29C – Yellow Insulgrip
.296-.687" (7.5-17.4) that utilizes a HBL61CM64BK* – Same as
#HBL61CM64 except black in color. tacle has heat resistant melamine body. connector body has rugged nylon
unique offset jaws arrangement for
HBL52CM21 – Yellow housing and detachable cord grip
secure strain relief. HBL52CM21* – Yellow
polycarbonate spring-loaded lift with range of .296-.687" (7.5-17.4)
HBL60CM17* – Yellow Seal-Tite® polycarbonate spring-loaded lift
cover plate for weatherproofing cover plate for weatherproofing that utilizes a unique offset jaws
cover for weatherproofing straight
#HBL47CM00 duplex receptacle. #HBL47CM00 duplex receptacle. arrangement to provide secure
blade Insulgrip plugs, #HBL53CM66C
Stainless steel screws and neoprene Stainless steel screws and neoprene strain relief.
and #HBL52CM66C, when used to
mate receptacles and connector gasket included for mounting to gasket included for mounting to HBL60CM24 – Yellow Seal-Tite cover
bodies. Can also be used with FS/FD type weatherproof boxes. FS/FD type weatherproof boxes. for weatherproofing #HBL47CM29C
Insulgrip connector bodies when IP44 suitability. Not CSA. IP44 suitability. Not CSA. Insulgrip connector body when used
mating with flanged inlets. IP55 HBL5221* – Same as #HBL52CM21 on extension cords and adapters. IP55
HBL5221 – Same as #HBL52CM21
suitability. Not CSA. except gray in color. IP44 suitability. suitability. Not CSA.
except gray in color. IP44 suitability.
Note: Fits Insulgrip devices only. Not CSA.
Not CSA. HBL47CM15 – Panel mount flanged
HBL52CM69C – Yellow Insulgrip HBL52CM22* – Same as
HBL52CM22* – Same as #HBL52CM21 outlet has heat resistant melamine
connector body has rugged nylon #HBL52CM21 except for mounting
except for mounting to standard interior and nickel plated brass casing.
housing and detachable cord grip to standard boxes. IP44 suitability.
with range of .296-.687" (7.5-17.4) Not CSA. boxes. IP44 suitability. Not CSA. HBL47CM16 – Panel mount flanged
that utilizes a unique offset jaws HBL5222* – Same as #HBL52CM22 HBL5222* – Same as #HBL52CM22 inlet has heat resistant melamine
arrangement for secure strain relief. except gray in color. IP44 suitability. except gray in color. IP44 suitability. interior and nickel plated brass casing.
HBL60CM18* – Yellow Seal-Tite Not CSA. Not CSA. YC314250* – Three conductor,
cover for weatherproofing straight HBL74CM23WO – Yellow #14 AWG type STO, yellow PVC
blade Insulgrip connector bodies, HBL47CM20C – Yellow Insulgrip®
polycarbonate spring-loaded lift jacketed portable cord has jute fillers
#HBL53CM69C and #HBL52CM69C, cover plate for weatherproofing plug has rugged nylon housing and
detachable cord grip with range of for added flexibility and is ideal for
on extension cords and adapters. single straight blade receptacles.
IP55 suitability. Not CSA. .296-.687" (7.5-17.4) that utilizes a making cable sets, extension cords
Stainless steel screws and neoprene and adapters as it will not mark the
Note: Fits Insulgrip devices only. gasket included. For mounting to unique offset jaws arrangement to
provide secure strain relief. boat’s deck. Available in 250'
HBL52CM80C – Yellow Insulgrip FS/FD type weatherproof boxes.
(76.2m) lengths only.
plug with anchor locking screw to IP44 suitability. Not CSA. HBL60CM23 – Short yellow Seal-Tite®
prevent accidental pull-out. The plug HBL7423WO – Same as cover for weatherproofing #HBL47CM20C
is “locked” into the receptacle when #HBL74CM23WO except gray Insulgrip plug when used with recep-
the screw is turned down so the in color. Not CSA. tacles or connector bodies. Also can
head is flush with the plug surface. be used to weatherproof #HBL47CM29C
The cord grip range is .296-.687"
Insulgrip connector body when used
(7.5-17.4). Not UL or CSA listed.
with #HBL47CM16 flanged inlet.
IP55 suitability. Not CSA.
*Not Shown
?? ?
Having trouble finding THE PRODUCTS
183-05
HBL7423WO
HBL74CM23WO HBL23CM13
HBL53CM66C
HBL23CM10
HBL53CM61 HBL60CM18
HBL53CM62 HBL60CM19
HBL23CM11
?? ?
Having trouble finding THE PRODUCTS
184-05
Y
MOLDED ADAPTERS G
W
G
Straight & Y, Corrosion Resistant W
G
W
HBL21CM28
W
HBL61CM71∆ G
W
HBL61CM59 X
W
G
HBL61CM56 Y HBL21CM29
W
HBL64CM51 W
G
G G
W W
Y G
X
W
W
G
G HBL61CM72∆
W
HBL64CM56
Y W
HBL64CM59
G
W
W W
G G
G
HBL61CM25 G
W
W
X
W
W Y
G
G W
W HBL61CM22 G
G
HBL61CM22W W
G
HBL64CM57
HBL64CM55
W
HBL61CM54 G
W W
Y G G
W
X
G W W
G
G
HBL61CM55
W
W HBL64CM54
G
G
G
W
W W
G
G W G W Y
G
W G G X
W W
W
G
HBL31CM28 HBL31CM29
G
HBL21CM28 – Permits use of 20A HBL61CM22W – Same as HBL61CM71∆ – Permits HBL64CM55 – Permits use of two
125V Twist-Lock® locking type plug #HBL61CM22 except in white. use of 30A 125V cable set, 50A 125V cable sets, #HBL61CM53,
with 15A 125V straight blade HBL61CM25 – Permits use of 30A #HBL61CM08P, with 50A 125/250V with one 50A 125/250V receptacle,
receptacle. IP20 suitability. 125V cable set, #HBL61CM08P, receptacle, #HBL63CM69. #HBL63CM69.
HBL21CM29 – Permits use of 15A with 20A 125V receptacle, HBL61CM72∆ – Permits use of 50A HBL64CM56 – Permits use
or 20A 125V straight blade plug with #HBL23CM10A. 125V cable set, #HBL61CM53, with of two 30A, 125V cable sets,
20A 125V Twist-Lock locking type HBL61CM54 – Permit use of 50A 50A 125/250V receptacle #HBL61CM08P, with one 30A
receptacle. IP20 suitability. 125V cable set, #HBL61CM53, with #HBL63CM69. 125V receptacle, #HBL26CM10A.
HBL31CM28 – Permits use of 30A 15A 125V straight blade receptacle, HBL5273L* – Permits use of 15A, HBL64CM57 – Permits use
125V Twist-Lock locking type plug #HBL52CM62. 125V 3 wire straight blade plug of two 30A, 125V cable sets,
with 15A 125V straight blade HBL61CM55 – Permits use with 15A 125V 2 wire straight #HBL61CM08P, with one
receptacle. IP20 suitability. of 30A 125V cable set, blade receptacle. 50A 125V receptacle,
HBL31CM29 – Permits use of 15A #HBL61CM08P, with 50A 125V HBL64CM51 – Permits use of two #HBL63CM70.
or 20A 125V straight blade plug with receptacle, #HBL63CM70. 15A or 20A 125V straight blade HBL64CM59 – Permits use
30A 125V Twist-Lock locking type HBL61CM56 – Permits use cable sets with one 30A 125V of two 30A 125V cable sets,
receptacle. IP20 suitability. of 50A 125V cable set, receptacle, #HBL26CM10A. #HBL61CM08P, with one 50A
HBL61CM22 – Permits use of 30A #HBL61CM53, with 30A 125V HBL64CM54 – Permits use 125/250V crow-foot straight
125V cable set, #HBL61CM08P, receptacle, #HBL26CM10A. of two 30A, 125V cable sets, receptacle, #HBL7962.
with 15A 125V straight blade HBL61CM59 – Permits use of 50A #HBL61CM08P, with one 50A,
receptacle, #HBL52CM62. Anchor 125/250V Twist-Lock locking type 125/250V receptacle,
locking screw on plug when cable set, #HBL61CM52, with 50A #HBL63CM69.
screwed down resists pullout 125/250V crow foot straight blade
from the weight of the cable set. receptacle #HBL7962.
*Not Shown
Note: the adapters on this page are not UL Listed because of the nature of adapters with their variety of ratings. The exceptions are #HBL21CM29, #HBL21CM28 and #HBL5273L.
∆ The male plug end (50A 125/250V) has a blade removed and the blade slot is epoxy filled. Omitting the blade ensures achieving 125V safely.
?? ?
Having trouble finding THE PRODUCTS
185-05
*Not Shown
?? ?
Having trouble finding THE PRODUCTS
186-05
HBL1281 HBL1283
HBL6079 HBL5361 HBL52CM62I HBL8200ILI
Switches
HBL2132MI CRO15 CRO20I HBL5251 CS115 – Single-pole toggle switch HBL1223IL* – 20A 120V three-way
for controlling AC load from one toggle switch with illuminated ivory
point-brown handle. See Note A handle for controlling AC load from
Receptacles two points. Handles illuminate
CS115GY* – Same as #CS115 when “OFF.”
HBL2132M* – 15A 125V brown CRO20WHI* – Same as #CRO20
except gray handle. See Note A
duplex receptacle. See Note A except white. See Note A HBL1221PL – 20A 120V single-pole
HBL2132MI – Same as #HBL2132M HBL5251 – 15A 125V brown CS115I* – Same as #CS115 except toggle switch with neon lamp set in
except ivory. See Note A single receptacle. ivory handle. See Note A clear red handle. Handle illuminates
CS115W* – Same as #CS115 except when switch is “ON.” Serves as
HBL2132MW* – Same as HBL5251l* – Same as #HBL5251 instant reminder that current is
#HBL2132M except white. except ivory. white handle. See Note A
flowing to an appliance.
See Note A HBL5361 – 20A 125V brown CS315 – Three-way toggle switch for
HBL1223PL* – 20A 120V three-way
HBL2132MGY* – Same as single receptacle. controlling AC load from two points.
toggle switch for controlling AC load
#HBL2132M except gray. Brown handle. See Note A
HBL5361I* – Same as #HBL5361 from two points. Red handle
See Note A except ivory. CS315GY* – Same as #CS315 illuminates when “ON.”
CRO15 – 15A 125V brown duplex except gray handle. See Note A HBL1281 – Single-pole press switch
HBL52CM62* – 15A 125V yellow
receptacle. See Note A corrosion resistant duplex for controlling AC load from one
CS315I* – Same as #CS315 except
CRO15BLK* – Same as #CRO15 receptacle. Use where salt or other ivory handle. See Note A point. Switch activated brown button.
except black. See Note A corrosive elements are a problem. HBL1281I* – Same as #HBL1281
CS315W* – Same as #CS315 except
CRO15GRY* – Same as #CRO15 HBL52CM62BN* – Same as white handle. See Note A except ivory button.
except gray. See Note A #HBL52CM62 except brown. HBL1283 – Single-pole press switch
HBL1221IL – 20A 120V toggle
CRO15l* – Same as #CRO15 HBL52CM62I – Same as switch with neon lamp set in ivory for controlling AC load from one
except ivory. See Note A #HBL52CM62 except ivory. handle. Handle illuminates when point. Brown button.
CRO15WHI* – Same as #CRO15 HBL8200ILI – Illuminated switch is in “OFF” position. HBL1283I* † – Same as #HBL1283
except white. See Note A receptacle 15A 125V grounding. except ivory button.
A high quality receptacle with
CRO20* – 20A 125V brown duplex
something extra: an illuminated Weatherproof Switch Plates
receptacle. See Note A
face. Ideal for use in halls or as a
CRO20BLK* – Same as #CRO20 gentle night light. HBL17CM50† – Yellow neoprene HBL1795 – Clear silicone rubber
except black. See Note A weatherproof plate for use only with weatherproof bubble plate for use
HBL6079 – Plastic switch/receptacle press switches. with all AC toggle
CRO20GRY* – Same as #CRO20 box. Measures 3-9⁄32” x 2-3⁄16” Press switch button switches and press
except gray. See Note A x 2-1⁄2” (83.3 x 55.6 x 63.5) deep. is activated when switches. Also
CRO20I – Same as #CRO20 except For mounting in walls without studs. bubble is pressed. ideal for use with
ivory. See Note A A support strap is provided which Not CSA. lighted handle
pulls box tightly against back side toggle switches.
of wall. Not CSA.
*Not Shown
† Not UL Listed
NOTE A: Will accept locking fork terminal to comply with ABYC standards. HBL17CM50 HBL1795
?? ?
Having trouble finding THE PRODUCTS
187-05
HBL74CM23WO, HBL7423WO
HBL74CM24WO, HBL7424WO
HBL6080 HBL74CM25WOA, HBL7425WOA HBL52CM21, HBL5221
HBL6080OS HBL52CM22, HBL5222
HBL6087
HBL60CM88
HBL6082
HBL60CM83 PH6619 HBL77CM74WO
CWP1CR
CWP8CR
CWP26CR
HBL60CM84 HBL6081
?? ?
Having trouble finding THE PRODUCTS
188-05
?? ?
Having trouble finding THE PRODUCTS
189-05
NEMA 5-15R
Heavy Duty, Specification Grade, 15A 125V
UL CSA
3.28" 2.72"
(83.3) (69.0)
Duplex Receptacles 0.5 HP
3.28" 2.72"
(83.3) (69.1)
.97"
NEMA 6-15R
(24.6)
1.94"
Heavy Duty, Specification Grade, 15A 250V
UL CSA
HBL5662 (49.3)
Duplex Receptacles 1.5 HP
1.94"
(49.3)
Heavy Duty, Specification Grade, Single Receptacles
Description Color Catalog Numbers
Flush, nylon face, back & side wired. Brown HBL5661
Ivory HBL5661I
Panel mount 1.94" (49.3) centers. Brown HBL5684
1.63"
(41.4)
HBL5661
?? ?
Having trouble finding THE PRODUCTS
190-05
1.25"
Pilot Light (light on with load on)
(31.8)
Catalog Numbers
HBL1221ILC
Rating Description Single Pole Double Pole Three Way
15A 120-277V AC Red polycarbonate HBL1201PL – HBL1203PL
toggle.
#6-32
TAP 20A 120-277V AC Red polycarbonate HBL1221PL HBL1222PL HBL1223PL
toggle.
20A 120-277V AC Clear polycarbonate HBL1221PLC – HBL1223PLC
toggle.
3.28" 2.28"
(83.3) 2.38" (57.9) 20A 120-277V AC Green polycarbonate HBL1221PLG – HBL1223PLG
(60.5) toggle.
1.05"
(26.7) 30A 120-277V AC Red polycarbonate HBL3031PL HBL3032PL –
toggle.
1.0"
(25.4)
1.25" HP Conversion Chart
(31.8)
120V 240V
HBL1221PL
15A 1 HP 2HP
20A 11 ⁄2 HP 2HP
?? ?
Having trouble finding THE PRODUCTS
191-05
W
HBL5266C
W 1.13"
(28.7)
NEMA 5-15R
15A 125V
Connector Bodies UL CSA
HBL5965VY
Description Cord Dia. Catalog
Numbers
Yellow nylon .220-.660"
(5.6-16.8) HBL5969VY™ 2.63"
(66.8)
G
1.25"
(31.8)
15A Plugs– NEMA 6-15P
15A 250V 1.13"
Phillips/Slotted Screws UL CSA
1.5 HP (28.7)
15A only
NEMA 6-15R
15A 250V
Connector Bodies UL CSA
?? ?
Having trouble finding THE PRODUCTS
192-05
TWIST-LOCK® Devices
2 Pole, 3 Wire Grounding
15 Ampere, 125, 250 Volts and 277 Volts AC
Plugs and Connector Bodies
IP20 W
G
SUITABILITY
NEMA L5-15P
15A 125V 1.91"
(48.5) 2.63"
UL/CSA
(66.8)
Plugs 0.5 HP
1.50"
W
G (38.1) 1.53" 1.41"
(38.9) (35.8)
NEMA L5-15R
15A 125V
HBL4723VY
Connector Bodies UL/CSA HBL4729C
?? ?
Having trouble finding THE PRODUCTS
193-05
Two tools for fishing cable: the Junior Pulling Grip is best
Junior Pulling Grips, Galvanized Steel
for pulling electrical cables, tubing, fuel lines, steering and Cable Diameter Approx. Breaking E M Catalog
control cables through conduits and other impossible to Range Inches (cm.) Strength Lbs. (N) Inches (cm) Model Numbers
reach places.The grip slides easily on the object, .19-.24 (.48-.61) 400 (1,779) 31 ⁄4 (8.25) 41 ⁄4 (10.79) J19 03305011
connects to a fish tape and the job is done. The pulling .25-.36 (.63-.91) 450 (2,002) 31 ⁄4 (8.25 41 ⁄4 (10.79) J25 03305001
sock is best for pulling all connectorized cables for radar,
.37-.49 (.94-1.24) 900 (4,003) 33⁄4 (9.52 7 (17.78) J37 03305002
depth finders and radios in the same areas.
.50-.61 (1.27-1.55) 1,300 (5,782) 41 ⁄4 (10.79) 81 ⁄2 (21.59) J50 03305003
.62-.74 (1.57-1.88) 1,950 (8,674) 5 (12.70) 10 (25.40) J62 03305004
.75-.99 (1.90-2.51) 2,800 (12,454) 53⁄4 (14.60) 10 (25.40) J75 03305005
1.00-1.24 (2.54-3.15) 3,900 (17,347) 61 ⁄2 (16.51) 111 ⁄2 (29.21) J100 03305006
?? ?
Having trouble finding THE PRODUCTS
194-05
Single conductor, flameretardant thermoplastic & nylon insulated, *M/R & flameretardant thermoplastic jacketed,
Aluminum (A) or Bronze (B) armored, power cable
STNIA® STNIB®
Ambient No. Max. over- Approx. net Min.
Type Temp. Amps Stds. AWG Cndr. area all diam. wt. per radius
and Size @ per Size C/M in 1000 ft. of bend
40°C 45°C Cndr. in. cm Alum. Brz. inches
STNIA (B) - 3 14 13 7 16 2,583 .280 .711 38 59 1.8
STNIA (B) - 4 36 34 7 14 4,107 .290 .737 42 64 2.1
STNIA (B) - 6 45 43 7 12 6,530 .320 .813 55 86 2.2
STNIA (B) - 10 57 54 7 10 10,380 .360 .914 74 110 2.6
STNIA (B) - 16 71 68 7 8 16,510 .420 1.067 109 151 3.0
STNIA (B) - 26 92 88 7 6 26,250 .470 1.194 148 195 3.3
STNIA (B) - 41 124 118 7 4 41,740 .540 1.372 221 277 4.1
STNIA (B) - 66 164 156 7 2 66,370 .640 1.626 313 376 4.8
STNIA (B) - 83 189 180 19 1 83,690 .700 1.778 406 476 5.3
STNIA (B) - 106 217 207 19 1/0 105,500 .750 1.905 486 561 5.7
STNIA (B) - 133 252 240 19 2/0 133,100 .800 2.032 588 669 6.2
STNIA (B) - 168 292 278 19 3/0 167,800 .860 2.184 714 802 6.5
STNIA (B) - 212 340 324 19 4/0 211,600 .920 2.337 872 970 7.2
STNIA (B) - 250 377 359 37 250 250,000 1.030 2.616 1063 1175 8.0
STNIA (B) - 300 433 412 37 300 300,000 1.100 2.794 1237 1355 8.6
STNIA (B) - 350 468 446 37 350 350,000 1.160 2.946 1415 1540 9.0
STNIA (B) - 400 513 489 37 400 400,000 1.210 3.073 1590 1720 9.4
STNIA (B) - 500 588 560 37 500 500,000 1.320 3.353 1945 2086 10.0
STNIA (B) - 750 759 723 61 750 750,000 1.635 4.153 2849 3024 12.3
STNIA (B) - 1000 910 867 61 1000 1,000,000 1.839 4.671 3691 3886 13.9
Three conductor, flameretardant thermoplastic & nylon insulated, *M/R & flameretardant thermoplastic jacketed,
Aluminum (A) or Bronze (B) armored, power cable
TTNIA® Ambient No. Max. over- Approx. net Min. TTNIB®
Type Temp. Amps Stds. AWG Cndr. area all diam. wt. per radius
and Size @ per Size C/M in 1000 ft. of bend
40°C 45°C Cndr. in. cm Alum. Brz. inches
TTNIA (B) - 3 12 11 7 16 2,583 .430 1.092 95 144 3.4
TTNIA (B) - 4 25 24 7 14 4,107 .480 1.219 106 155 3.9
TTNIA (B) - 6 30 29 7 12 6,530 .520 1.321 142 197 4.2
TTNIA (B) - 10 40 38 7 10 10,380 .590 1.499 212 277 4.7
TTNIA (B) - 16 50 48 7 8 16,510 .730 1.854 321 400 5.2
TTNIA (B) - 26 68 65 7 6 26,250 .850 2.159 448 533 5.8
TTNIA (B) - 41 87 83 7 4 41,740 1.050 2.667 714 825 7.9
TTNIA (B) - 66 117 111 7 2 66,370 1.200 3.048 1008 1135 8.8
TTNIA (B) - 83 138 131 19 1 83,690 1.330 3.378 1268 1409 10.2
TTNIA (B) - 106 153 150 19 1/0 105,500 1.430 3.632 1514 1665 11.0
TTNIA (B) - 133 182 173 19 2/0 133,100 1.540 3.912 1836 1998 12.0
TTNIA (B) - 168 211 201 19 3/0 167,800 1.660 4.216 2250 2426 12.6
TTNIA (B) - 212 244 232 19 4/0 211,600 1.860 4.724 2736 2927 13.7
TTNIA (B) - 250 272 259 37 250 250,000 2.030 5.156 3337 3554 15.8
TTNIA (B) - 300 305 290 37 300 300,000 2.170 5.512 3897 4128 16.8
TTNIA (B) - 350 333 317 37 350 350,000 2.280 5.791 4458 4703 17.8
TTNIA (B) - 400 359 342 37 400 400,000 2.390 6.071 5042 5299 18.6
TTNIA (B) - 500 413 393 37 500 500,000 2.620 6.655 6161 6445 20.1
*M/R - Moisture Resistant Construction: Basically the same construction as Type DTNIA (or B), except four conductor
Current carrying capacity of four-conductor cable type FTNIA is the same as three conductor cables listed under type TTNIA
195-05
SPEC. #474
Double conductor, flameretardant thermoplastic
& nylon insulated, *M/R & flameretardant
thermoplastic jacketed, Aluminum (A) or Bronze
(B) armored, power cable
Four conductor, flameretardant thermoplastic & nylon insulated, *M/R & flameretardant thermoplastic jacketed,
Aluminum (A) or Bronze (B) armored, power cable
FTNIA® Ambient No. Max. over- Approx. net Min. FTNIB®
Type Temp. Amps Stds. AWG Cndr. area all diam. wt. per radius
and Size @ per Size C/M in 1000 ft. of bend
40°C 45°C Cndr. in. cm Alum. Brz. inches
Construction: Basically the same construction as Type DTNIA (or B), except four conductor
Current carrying capacity of four-conductor cable type FTNIA is the same as three conductor cables listed under type TTNIA
*M/R - Moisture Resistant
Florida Marine Products, Inc.
FLORIDA 2001 E. 5th Ave. Tampa, FL 33605
WHOLESALE Phone: 1-800-952-2283
Fixtures • Fittings • Ship Board Cable MARINE PRODUCTS Fax:
1-813-248-2283
1-813-247-7105
IN STOCK SAME DAY SHIPPING
INC. E-mail: fl-marine@ij.net
Web: www.fmpusa.com
0200-03 4/27/05 1:04 PM Page 1
196-05
Multiple conductor, color coded, flameretardant thermoplastic & nylon insulated, *M/R & flameretardant
thermoplastic jacketed, Aluminum (A) or Bronze (B) armored, control cable
No. 16 AWG
MTNIA ®
Max. over- Approx. net Min. MTNIB®
Type No. of AWG Cndr. area all diam. wt. per radius
and Size Cndrs. Size C/M in 1000 ft. of bend
in. cm Alum. Brz. inches
MTNIA (B) - 4 4 16 2,580 .440 1.118 104 149 3.5
MTNIA (B) - 6 6 16 2,580 .532 1.351 136 191 4.3
MTNIA (B) - 7 7 16 2,580 .532 1.351 149 204 4.3
MTNIA (B) - 8 8 16 2,580 .589 1.496 172 237 4.7
MTNIA (B) -10 10 16 2,580 .672 1.707 217 285 5.4
MTNIA (B) -12 12 16 2,580 .692 1.758 251 322 5.5
MTNIA (B) -14 14 16 2,580 .718 1.824 278 349 5.7
MTNIA (B) -16 16 16 2,580 .739 1.877 307 378 5.9
MTNIA (B) -20 20 16 2,580 .782 1.986 364 438 6.3
MTNIA (B) -24 24 16 2,580 .902 2.291 415 498 7.2
MTNIA (B) -30 30 16 2,580 .950 2.413 533 631 7.6
MTNIA (B) -36 36 16 2,580 1.022 2.596 622 734 8.2
MTNIA (B) -37 37 16 2,580 1.022 2.596 635 749 8.2
MTNIA (B) -40 40 16 2,580 1.057 2.685 679 795 8.5
MTNIA (B) -44 44 16 2,580 1.134 2.880 742 859 9.1
MTNIA (B) -61 61 16 2,580 1.270 3.226 986 1,161 10.2
MTNIA (B) -91 91 16 2,580 1.506 3.830 1,460 1,630 12.1
*M/R - Moisture Resistant
197-05
No. 14 AWG
MTNIA® Max. over- Approx. net Min. MTNIB®
Type No. of AWG Cndr. area all diam. wt. per radius
and Size Cndrs. Size C/M in 1000 ft. of bend
in. cm Alum. Brz. inches
MTNIA (B) - 4 (4) 4 14 4,107 .480 1.219 157 209 3.8
MTNIA (B) - 6 (4) 6 14 4,107 .557 1.415 199 262 4.5
MTNIA (B) - 7 (4) 7 14 4,107 .557 1.415 220 283 4.5
MTNIA (B) - 8 (4) 8 14 4,107 .669 1.699 261 327 5.4
MTNIA (B) - 10 (4) 10 14 4,107 .720 1.829 332 415 5.8
MTNIA (B) - 12 (4) 12 14 4,107 .741 1.882 381 473 5.9
MTNIA (B) - 14 (4) 14 14 4,107 .775 1.969 424 515 6.2
MTNIA (B) - 16 (4) 16 14 4,107 .814 2.067 476 571 6.5
MTNIA (B) - 20 (4) 20 14 4,107 .894 2.499 622 748 7.2
MTNIA (B) - 24 (4) 24 14 4,107 1.027 2.609 712 842 8.2
MTNIA (B) - 30 (4) 30 14 4,107 1.082 2.748 841 973 8.7
MTNIA (B) - 36 (4) 36 14 4,107 1.159 2.944 1029 1194 9.3
MTNIA (B) - 37 (4) 37 14 4,107 1.159 2.944 1049 1214 9.3
MTNIA (B) - 40 (4) 40 14 4,107 1.240 3.150 1127 1298 9.9
MTNIA (B) - 44 (4) 44 14 4,107 1.292 3.282 1227 1403 10.3
MTNIA (B) - 61 (4) 61 14 4,107 1.359 3.452 1310 1585 10.9
No. 12 AWG
Max. over- Approx. net Min.
Type No. of AWG Cndr. area all diam. wt. per radius
and Size Cndrs. Size C/M in 1000 ft. of bend
in. cm Alum. Brz. inches
MTNIA (B) - 4 (6) 4 12 6,530 .533 1.354 198 261 4.3
MTNIA (B) - 6 (6) 6 12 6,530 .654 1.661 281 352 5.2
MTNIA (B) - 7 (6) 7 12 6,530 .654 1.661 310 381 5.2
MTNIA (B) - 8 (6) 8 12 6,530 .748 1.900 343 419 6.0
MTNIA (B) - 10 (6) 10 12 6,530 .809 2.055 423 517 6.5
MTNIA (B) - 12 (6) 12 12 6,530 .834 2.118 516 622 6.7
MTNIA (B) - 14 (6) 14 12 6,530 .872 2.215 573 679 7.0
MTNIA (B) - 16 (6) 16 12 6,530 .918 2.332 640 753 7.3
MTNIA (B) - 20 (6) 20 12 6,530 1.053 2.675 768 889 8.4
MTNIA (B) - 24 (6) 24 12 6,530 1.159 2.944 914 1063 9.3
MTNIA (B) - 30 (6) 30 12 6,530 1.216 3.089 1136 1288 9.7
MTNIA (B) - 36 (6) 36 12 6,530 1.314 3.338 1314 1485 10.5
MTNIA (B) - 37 (6) 37 12 6,530 1.314 3.338 1345 1516 10.5
MTNIA (B) - 40 (6) 40 12 6,530 1.408 3.576 1464 1647 11.3
MTNIA (B) - 44 (6) 44 12 6,530 1.468 3.729 1592 1782 11.7
198-05
SPEC. #472
CONFORMS TO IEEE STD. 45
SXIA Single conductor, flameretardant cross-linked polyethylene insulated, flameretardant & *M/R thermoplastic SXIB
jacketed Aluminum (A) or Bronze (B) armored power or control cable
Ambient
Max. over- Approx. net Min.
Temp. Amps Number
Type Ins. AWG Cndr. area all diam. wt. per radius
@ strands
and Size mils. Size C/M in 1000 ft. of bend
40°C 50°C per Cond.
in. cm Alum. Brz. inches
(single bank)
SXIA (B) - 4 30 36 32 7 14 4,107 .30 .76 48 78 2.4
SXIA (B) - 6 30 45 40 7 12 6,530 .33 .83 59 91 2.6
SXIA (B) - 10 30 57 51 7 10 10,380 .35 .89 77 112 2.8
SXIA (B) - 16 45 71 64 7 8 16,510 .41 1.05 111 153 3.3
SXIA (B) - 26 45 92 83 7 6 26,250 .45 1.15 151 198 3.6
SXIA (B) - 41 45 124 111 7 4 41,740 .51 1.29 211 264 4.1
SXIA (B) - 66 45 164 147 7 2 66,370 .57 1.45 302 362 4.6
SXIA (B) - 83 55 189 169 19 1 83,690 .66 1.69 386 453 5.3
SXIA (B) - 106 55 217 195 19 1/0 105,500 .71 1.79 465 537 5.7
SXIA (B) - 133 55 252 226 19 2/0 133,100 .76 1.93 564 641 6.1
SXIA (B) - 168 55 292 261 19 3/0 167,800 .81 2.06 685 768 6.5
SXIA (B) - 212 55 340 305 19 4/0 211,600 .87 2.22 837 930 7.0
SXIA (B) - 250 65 377 337 37 250 250,000 .99 2.51 1018 1125 7.9
SXIA (B) - 300 65 433 387 37 300 300,000 1.04 2.65 1190 1302 8.3
SXIA (B) - 350 65 468 419 37 350 350,000 1.09 2.78 1361 1480 8.8
SXIA (B) - 400 65 513 460 37 400 400,000 1.15 2.91 1534 1657 9.2
SXIA (B) - 500 65 588 526 37 500 500,000 1.23 3.13 1870 2002 9.8
SXIA (B) - 600 80 654 586 61 600 600,000 1.35 3.42 2236 2381 10.8
SXIA (B) - 750 80 759 680 61 750 750,000 1.46 3.71 2735 2891 11.7
SXIA (B) -1000 80 910 815 61 1000 1,000,000 1.62 4.11 3560 3734 13.0
DXIA Two conductor, flameretardant cross-linked polyethylene insulated, flameretardant & *M/R thermoplastic DXIB
jacketed Aluminum (A) or Bronze (B) armored power or control cable
Ambient
Max. over- Approx. net Min.
Temp. Amps Number
Type Ins. AWG Cndr. area all diam. wt. per radius
@ strands
and Size mils. Size C/M in 1000 ft. of bend
40°C 50°C per Cond.
in. cm Alum. Brz. inches
(single bank)
DXIA (B) - 4 30 30 27 7 14 4,107 .44 1.12 90 137 3.5
DXIA (B) - 6 30 38 34 7 12 6,530 .50 1.26 114 166 4.0
DXIA (B) - 10 30 48 43 7 10 10,380 .54 1.37 154 210 4.3
DXIA (B) - 16 45 63 56 7 8 16,510 .70 1.77 244 314 5.6
DXIA (B) - 26 45 83 74 7 6 26,250 .78 1.98 330 409 6.2
DXIA (B) - 41 45 106 95 7 4 41,740 .88 2.25 485 580 7.1
DXIA (B) - 66 45 144 129 7 2 66,370 1.05 2.67 757 871 8.4
DXIA (B) - 83 55 169 151 19 1 83,690 1.18 2.99 923 1050 9.4
DXIA (B) - 106 55 192 172 19 1/0 105,500 1.26 3.21 1132 1267 10.1
DXIA (B) - 133 55 245 219 19 2/0 133,100 1.37 3.47 1315 1462 10.9
DXIA (B) - 168 55 257 230 19 3/0 167,800 1.47 3.74 1608 1765 11.8
DXIA (B) - 212 55 298 267 19 4/0 211,600 1.60 4.06 1938 2109 12.8
DXIA (B) - 250 65 332 297 37 250 250,000 1.75 4.43 2320 2509 14.0
DXIA (B) - 300 65 372 333 37 300 300,000 1.91 4.86 2815 3022 15.3
DXIA (B) - 350 65 406 364 37 350 350,000 2.02 5.13 3213 3432 16.1
DXIA (B) - 400 65 440 394 37 400 400,000 2.12 5.39 3609 3840 17.0
DXIA (B) - 500 65 503 450 37 500 500,000 2.29 5.82 4342 4592 18.3
DXIA (B) - 600 80 566 507 61 600 600,000 2.52 6.41 5283 5560 20.2
DXIA (B) - 750 80 632 567 61 750 750,000 2.75 6.99 6394 6689 22.0
199-05
TXIA Ambient
Temp. Amps
Max. over- Approx. net Min. TXIB
Ins. Strands AWG Cndr. area all diam. wt. per radius
Type @
mils. 40°C 50°C per Cond. Size C/M in 1000 ft. of bend
and Size
in. cm Alum. Brz. inches
(single bank)
TXIA (B) - 4 30 25 23 7 14 4,107 .47 1.19 113 163 3.8
TXIA (B) - 6 30 30 27 7 12 6,530 .52 1.33 146 201 4.2
TXIA (B) - 10 30 40 36 7 10 10,380 .57 1.44 197 257 4.5
TXIA (B) - 16 45 50 45 7 8 16,510 .74 1.87 317 391 5.9
TXIA (B) - 26 45 68 61 7 6 26,250 .83 2.10 440 525 6.6
TXIA (B) - 41 45 87 78 7 4 41,740 .98 2.49 655 760 7.9
TXIA (B) - 66 45 117 104 7 2 66,370 1.12 2.84 978 1098 8.9
TXIA (B) - 83 55 138 123 19 1 83,690 1.25 3.19 1202 1337 10.0
TXIA (B) -106 55 158 141 19 1/0 105,500 1.34 3.41 1444 1589 10.8
TXIA (B) -133 55 182 163 19 2/0 133,100 1.46 3.70 1739 1894 11.7
TXIA (B) -168 55 211 189 19 3/0 167,800 1.57 3.99 2162 2330 12.6
TXIA (B) -212 55 244 218 19 4/0 211,600 1.71 4.34 2621 2806 13.7
TXIA (B) -250 65 272 244 37 250 250,000 1.93 4.90 3220 3429 15.4
TXIA (B) -300 65 305 273 37 300 300,000 2.04 5.19 3746 3968 16.3
TXIA (B) -350 65 333 298 37 350 350,000 2.16 5.48 4317 4552 17.2
TXIA (B) -400 65 359 321 37 400 400,000 2.27 5.76 4900 5149 18.2
TXIA (B) -500 65 413 369 37 500 500,000 2.45 6.23 5981 6250 19.6
TXIA (B) -600 80 462 414 61 600 600,000 2.70 6.86 7165 7454 21.6
TXIA (B) -750 80 519 464 61 750 750,000 3.01 7.65 8928 9249 24.1
Four conductor, flameretardant cross-linked polyethylene insulated, flameretardant & *M/R thermoplastic jacketed
Aluminum (A) or Bronze (B) armored, power or control cable
FXIA Ambient
Temp. Amps
Max. over- Approx. net Min. FXIB
Ins. Strands AWG Cndr. area all diam. wt. per radius
Type @
and Size mils. per Cond. Size C/M in 1000 ft. of bend
40°C 50°C
in. cm Alum. Brz. inches
single bank)
FXIA (B) - 4 30 25 23 7 14 4,107 .51 1.30 139 193 4.1
FXIA (B) - 6 30 30 27 7 12 6,530 .55 1.40 180 240 4.4
FXIA (B) - 10 30 40 36 7 10 10,380 .65 1.65 263 329 5.2
FXIA (B) - 16 45 50 45 7 8 16,510 .80 2.04 392 474 6.4
FXIA (B) - 26 45 68 61 7 6 26,250 .91 2.31 551 648 7.2
FXIA (B) - 41 45 87 78 7 4 41,740 1.05 2.67 834 950 8.4
FXIA (B) - 66 45 117 104 7 2 66,370 1.22 3.11 1207 1338 9.8
FXIA (B) - 83 55 138 123 19 1 83,690 1.38 3.50 1556 1702 11.0
FXIA (B) -106 55 158 141 19 1/0 105,500 1.48 3.75 1883 2040 11.8
FXIA (B) -133 55 182 163 19 2/0 133,100 1.61 4.08 2270 2442 12.8
FXIA (B) -168 55 211 189 19 3/0 167,800 1.73 4.40 2767 2954 13.9
FXIA (B) -212 55 244 218 19 4/0 211,600 1.94 4.92 3469 3679 15.5
FXIA (B) -250 65 272 244 37 250 250,000 2.12 5.37 4098 4328 16.9
FXIA (B) -300 65 305 273 37 300 300,000 2.24 5.70 4897 5143 17.9
FXIA (B) -350 65 333 298 37 350 350,000 2.37 6.02 5671 5931 19.0
FXIA (B) -400 65 359 321 37 400 400,000 2.50 6.34 6344 6617 20.0
FXIA (B) -500 65 413 369 37 500 500,000 2.70 6.86 7667 7956 21.6
FXIA (B) -600 80 462 414 61 600 600,000 3.05 7.75 9443 9770 24.4
FXIA (B) -750 80 519 464 61 750 750,000 3.33 8.46 11545 11903 26.7
M/R - moisture resistant
200-05
DRAKA USA
FLAME RETARDANT CABLES
RFOU 0.6/1KV - EPR/EPR/TCWB/EVA
Maximum operating
Conductor temperature :85°C
Operating voltage :0.6/1kV
Standards applied
IEC: 60092-353 &
NEK 606 -Design guidelines
IEC: 60332-3/A -Flame retardance
IEC: 60754-1,2 -Halogen-free properties Core identification:
IEC: 61034-1,2 -Smoke density One core Grey (Off-white)
Two cores Grey (Off-white) - Black
Three cores Grey (Off-white) - Black - Red
Application:
Four cores Grey (Off-white) - Black - Red - Blue
Fixed installation for power, control and lighting,
Five Cores Grey (Off-white) - Black - Red - Blue - Black
in both EX-and safe areas, general purposes.
Above five cores Black numbers on white base
Mud resistant in accordance with NEK 606.
Earth core Yellow/green
CONSTRUCTION
CODE LETTER
Conductor Circular, tinned, stranded copper. (1)
Insulation R EP-rubber. (2)
Bedding F Flame retardant and halogen-free thermoset compound. (3)
PETP-tape. (4)
Armour O Tinned copper wire braid. (5)
PETP-tape. (6)
Outer sheath U Flame retardant, halogen-free and mud resistant thermoset
compound, SHF2. (7)
Marking E.g; “meter” “year” DRAKA NORSK KABEL RFOU 0,6/1kV
P1/P8 3x25/16 mm2 IEC 60332-3/A “CE”
Color Black
Installation recommendations:
In accordance with IEC 60092-352
201-05
DRAKA USA
FLAME RETARDANT CABLES – RFOU 0.6/1kV
Part No. of Cond. Insulation Diameter Diameter Weight of Resistance Reactance Current Short
No. cores and diam. thickness bedding outer cable at 20°C at 50Hz rating at circuit
cond. area appr. sheath approx. 45°C rating
(mm2) (mmØ) (mm) (mmØ) (mmØ) (kg/km) (ohm/km) (ohm/km) (ampere) 1 sec
(ampere)
800000 1x 16/2,5 5,20 1,0 10,0±1,0 13, 5±1,0 350 1,16 0,116 90 2240
800001 1x 25/4 6,60 1,2 11,5±1,0 15,0±1,0 470 0,734 0,112 120 3500
800002 1x 35/6 7,70 1,2 13,0±1,0 16,5±1,0 640 0,529 0,106 145 4900
800003 1x 50/6 9,00 1,4 15,0±1,0 19,0±1,0 820 0,391 0,103 180 7000
800004 1x 70/6 10,90 1,4 17,0±1,0 20,5±1,5 1060 0,270 0,100 225 9800
800005 1x 95/10 12,60 1,6 19,0±1,0 23,0±1,5 1360 0,195 0,097 275 13300
800006 1x 120/10 14,20 1,6 20,5±1,5 25,0±1,5 1680 0,154 0,094 320 16800
800007 1x 150/10 15,90 1,8 23,0±1,5 27,0±1,5 2010 0,126 0,092 365 21000
800008 1x 185/10 17,70 2,0 25,0±1,5 29,5±1,5 2430 0,100 0,091 415 25900
800009 1x 240/16 20,15 2,2 28,0±1,5 32,5±2,0 3090 0,0762 0,090 490 33600
800010* 1x 300/16 22,60 2,4 30,5±2,0 36,0±2,0 3790 0,0607 0,089 560 42000
800015* 2x 1,5/4 1,60 1,0 10,0±1,0 13,0±1,0 260 12,2 0,110 17 210
800029* 2x 2,5/4 2,00 1,0 10,5±1,0 14,0±1,0 300 7,56 0,103 24 350
800045* 2x 4/6 2,55 1,0 12,0±1,0 15,5±1,0 400 4,70 0,096 32 560
800051* 2x 6/6 3,15 1,0 13,0±1,0 16,5±1,0 490 3,11 0,090 41 840
800057 2x 10/10 4,05 1,0 15,0±1,0 18,5±1,0 640 1,84 0,084 57 1400
800063 2x 16/16 5,15 1,0 17,0±1,0 21,5±1,5 910 1,16 0,080 77 2240
800018* 3x 1,5/4 1,60 1,0 10,5±1,0 13,5±1,0 290 12,2 0,110 14 210
800032* 3x 2,5/6 2,00 1,0 11,5±1,0 15,0±1,0 370 7,56 0,103 20 350
800046* 3x 4/6 2,55 1,0 12,5±1,0 16,0±1,0 460 4,70 0,096 27 560
800052* 3x 6/6 3,15 1,0 14,0±1,0 17,5±1,0 570 3,11 0,090 34 840
800058* 3x 10/10 4,05 1,0 16,0±1,0 19,5±1,0 740 1,84 0,084 47 1400
800064* 3x 16/16 5,15 1,0 18,0±1,0 22,5±1,5 1070 1,16 0,080 63 2240
800070* 3x 25/16 6,40 1,2 22,0±1,5 26,5±1,5 1520 0,734 0,079 84 3500
800076* 3x 35/16 7,65 1,2 24,5±1,5 29,0±1,5 1880 0,529 0,076 100 4900
800082* 3x 50/25 9,00 1,4 29,0±1,5 34,0±2,0 2630 0,391 0,076 125 7000
800088* 3x 70/35 10,85 1,4 33,0±2,0 39,0±2,0 3540 0,270 0,075 160 9800
800095* 3x 95/50 12,60 1,6 37,5±2,0 43,5±2,5 4660 0,195 0,073 195 13300
800101* 3x 120/60 14,20 1,6 41,0±2,5 48,0±2,5 5740 0,154 0,072 225 16800
- 3x 150/70* 15,90 1,8 45,0±2,5 54,0±3,0 7450 0,126 0,072 255 21000
- 3x 185/95* 16,80 2,0 52,0±2,5 62,5±3,5 9600 0,100 0,072 290 25900
800019* 4x 1,5/4 1,60 1,0 11,5±1,0 15,0±1,0 360 12,2 0,110 14 210
800035* 4x 2,5/6 2,00 1,0 12,5±1,0 16,0±1,0 440 7,56 0,103 20 350
800047 4x 4/6 2,55 1,0 13,5±1,0 17,5±1,0 540 4,70 0,096 27 560
800053 4x 6/6 3,15 1,0 15,0±1,0 19,0±1,0 670 3,11 0,090 34 840
800059 4x 10/10 4,05 1,0 17,5±1,0 21,5±1,5 900 1,84 0,084 47 1400
800065 4x 16/16 5,15 1,0 20,0±1,5 25,0±1,5 1330 1,16 0,080 63 2240
800071* 4x 25/16 6,40 1,2 24,0±1,5 29,0±1,5 1800 0,734 0,079 84 3500
800077 4x 35/16 7,65 1,2 27,5±1,5 32,0±2,0 2340 0,529 0,076 100 4900
800083* 4x 50/25 9,00 1,4 32,0±2,5 37,5±2,0 3210 0,391 0,076 125 7000
800089 4x 70/35 10,85 1,4 36,5±2,0 43,0±2,5 4360 0,270 0,075 160 9800
800096* 4x 95/50 12,60 1,6 41,5±2,5 48,0±2,5 5750 0,195 0,073 195 13300
- 4x 185/95* 16,80 2,0 55,0±2,5 66,5±3,5 11250 0,100 0,072 290 25900
800020 5x 1,5/6 1,60 1,0 12,5±1,0 16,0±1,0 430 12,2 0,110 12 210
800021* 7x 1,5/6 1,60 1,0 13,5±1,0 17,0±1,0 490 12,2 0,110 10 210
800037 7x 2,5/6 2,00 1,0 14,5±1,0 18,5±1,0 610 7,56 0,103 15 350
800022* 12x 1,5/10 1,60 1,0 18,0±1,0 22,0±1,5 720 12,2 0,110 9 210
800038 12x 2,5/10 2,00 1,0 19,5±1,0 24,0±1,5 910 7,56 0,103 12 350
800023 19x 1,5/10 1,60 1,0 21,0+1,5 25,5±1.5 990 12,2 0,110 8 210
800039 19x 2,5/10 2,00 1,0 23,0±1,5 27,5±1,5 1260 7,56 0,103 11 350
800024 27x 1,5/10 1,60 1,0 25,0±1,5 30,0±2,0 1320 12,2 0,110 6,5 210
800040 27x 2,5/16 2,00 1,0 27,5±1,5 32,5±2,0 1680 7,56 0,103 9 350
800025 37x 1,5/16 1,60 1,0 28,0±1,5 33,0±2,0 1670 12,2 0,110 6 210
800041 37x 2,5/16 2,00 1,0 31,5±2,0 36,5±2,0 2190 7,56 0,103 8 350
?? ?
Having trouble finding THE PRODUCTS
202-05
DRAKA USA
FIRE RESISTANT CABLES
BFOU 0.6/1KV - MGT/EPR/EPR/TCWB/EVA
Maximum operating
Conductor temperature :85°C
Operating voltage :0.6/1kV
Standards applied
IEC: 60092-353 &
NEK 606 -Design guidelines
IEC: 60332-3/A -Flame retardance
IEC: 60331 -Fire resistant Core identification:
IEC: 60754-1,2 -Halogen-free properties One core Grey (Off-white)
IEC: 61034-1,2 -Smoke density Two cores Grey (Off-white) - Black
Three cores Grey (Off-white) - Black - Red
Application: Four cores Grey (Off-white) - Black - Red - Blue
Fixed installation for power, control and lighting, Five Cores Grey (Off-white) - Black - Red - Blue - Black
in both EX-and safe areas, emergency and Above five cores Black numbers on white base
critical systems. Earth core Yellow/green
CONSTRUCTION
CODE LETTER
Conductor Circular, tinned, stranded copper. (1)
Insulation B Mica tape. (2) / EP-rubber. (3)
Bedding F Flame retardant and halogen-free thermoplastic compound. (4)
PETP-tape. (5)
Armour O Tinned copper wire braid. (6)
PETP-tape. (7)
Outer sheath U Flame retardant, halogen-free and mud resistant thermoset
compound, SHF 2. (8)
Marking E.g; “meter” “year” DRAKA NORSK KABEL BFOU 0,6/1kV
P5/P12 3x25/16 mm2 FLEX-FLAME IEC 60331
IEC 60332-3/A “CE”
Color Black
Installation recommendations:
In accordance with IEC 60092-352
203-05
DRAKA USA
* Double braid (two layers of wires)
FIRE RESISTANT CABLES – BFOU 0.6/1kV
Part No. of Cond. Insulation Diameter Diameter Weight of Resistance Reactance Current Short circuit
No. cores and diam. thickness bedding outer cable at 20°C at 50Hz rating at rating
cond. area appr. sheath approx. 45°C
(mm2) (mmØ) (mm) (mmØ) (mmØ) (kg/km) (ohm/km) (ohm/km) (ampere) (ampere)
800200 1x 16/2,5 5,20 1,0 10,5±1,0 13, 5±1,0 360 1,16 0,120 90 2240
800201 1x 25/4 6,60 1,2 12,0±1,0 15,0±1,0 480 0,734 0,113 120 3500
800202 1x 35/6 7,70 1,2 13,5±1,0 17,0±1,0 650 0,529 0,107 145 4900
800203* 1x 50/6 9,00 1,4 15,5±1,0 19,0±1,0 830 0,391 0,104 180 7000
800204 1x 70/6 10,90 1,4 17,0±1,0 21,0±1,5 1070 0,270 0,101 225 9800
800205 1x 95/10 12,60 1,6 19,0±1,0 23,5±1,5 1380 0,195 0,098 275 13300
800206 1x 120/10 14,20 1,6 21,0±1,5 25,5±1,5 1700 0,154 0,094 320 16800
800207 1x 150/10 15,90 1,8 23,5±1,5 27,5±1,5 2030 0,126 0,094 365 21000
800208 1x 185/10 17,70 2,0 25,5±1,5 30,0±2,0 2470 0,100 0,091 415 25900
800209 1x 240/16 20,15 2,2 28,5±1,5 33,0±2,0 3130 0,0762 0,091 490 33600
800210 1x 300/16 22,60 2,4 31,0±2,0 36,5±2,0 3820 0,0607 0,089 560 42000
800215* 2x 1,5/4 1,60 1,0 10,5±1,0 13,5±1,0 280 12,2 0,115 17 210
800229* 2x 2,5/4 2,00 1,0 11,5±1,0 14,5±1,0 320 7,56 0,107 24 350
800245* 2x 4/6 2,55 1,0 12,5±1,0 16,0±1,0 420 4,70 0,100 32 560
800251* 2x 6/6 3,15 1,0 13,5±1,0 17,5±1,0 510 3,11 0,094 41 840
800257 2x 10/10 4,05 1,0 15,5±1,0 19,5±1,0 680 1,84 0,088 57 1400
800263 2x 16/16 5,15 1,0 17,5±1,0 22,5±1,5 960 1,16 0,082 77 2240
800218* 3x 1,5/4 1,60 1,0 11,0±1,0 14,5±1,0 310 12,2 0,115 14 210
800232* 3x 2,5/6 2,00 1,0 12,0±1,0 15,5±1,0 400 7,56 0,107 20 350
800246* 3x 4/6 2,55 1,0 13,5±1,0 17,0±1,0 500 4,70 0,100 27 560
800252* 3x 6/6 3,15 1,0 14,5±1,0 18,5±1,0 590 3,11 0,094 34 840
800258* 3x 10/10 4,05 1,0 16,5±1,0 20,5±1,5 780 1,84 0,088 47 1400
800264* 3x 16/16 5,15 1,0 19,0±1,0 23,5±1,5 1130 1,16 0,082 63 2240
800270* 3x 25/16 6,40 1,2 22,5±1,5 27,0±1,5 1510 0,734 0,081 84 3500
800276* 3x 35/16 7,65 1,2 25,5±1,5 30,0±2,0 1930 0,529 0,078 100 4900
800282* 3x 50/25 9,00 1,4 29,5±1,5 34,5±2,0 2640 0,391 0,078 125 7000
800288* 3x 70/35 10,85 1,4 34,5±2,0 40,5±2,5 3630 0,270 0,077 160 9800
800295* 3x 95/50 12,60 1,6 38,0±2,0 44,5±2,5 4720 0,195 0,075 195 13300
800301 3x 120/60 14,20 1,6 41,5±2,5 48,5±2,5 5820 0,154 0,073 225 16800
800302 3x 150/70* 15,90 1,8 46,5±2,5 54,5±3,0 7210 0,126 0,073 255 21000
- 3x 185/95* 16,80 2,0 52,0±3,0 61,5±3,5 9400 0,100 0,073 290 25900
- 3x 1,5 + E 1,60 1,0 12,0±1,0 16,0±1,0 390 12,2 0,115 14 210
800233 3x 2,5 + E 2,00 1,0 13,0±1,0 17,0±1,0 470 7,56 0,107 20 350
800243 3x 4 + E 2,55 1,0 14,5±1,0 18,5±1,0 580 4,70 0,100 27 560
800255 3x 6 + E 3,15 1,0 16,0±1,0 20,0±1,5 700 3,11 0,094 34 840
800261 3x 10 + E 4,05 1,0 18,0±1,0 22,5±1,0 930 1,84 0,088 47 1400
800266 3x 16 + E 5,15 1,0 21,0±1,5 25,0±1,5 1350 1,16 0,082 63 2240
800272 3x 25 + E 6,40 1,2 25,0±1,5 29,5±1,5 1850 0,734 0,081 84 3500
800279 3x 35 + E 7,65 1,2 28,0±1,5 33,0±2,0 2370 0,529 0,078 100 4900
- 3x 50 + E 9,00 1,4 33,0±2,0 38,5±2,0 3280 0,391 0,078 125 7000
800290 3x 70 + E 10,85 1,4 37,0±2,0 43,0±2,5 4340 0,270 0,077 160 9800
800297 3x 95 + E 12,60 1,6 42,5±2,5 48,5±2,5 5700 0,195 0,075 195 13300
800306 3x 120 + E 14,20 1,6 46,0±2,5 52,5±3,0 7000 0,154 0,073 225 16800
800219* 4x 1,5/6 1,60 1,0 12,0±1,0 16,0±1,0 390 12,2 0,115 14 210
800235* 4x 2,5/6 2,00 1,0 13,0±1,0 17,0±1,0 470 7,56 0,107 20 350
800247 4x 4/6 2,55 1,0 14,5±1,0 18,5±1,0 580 4,70 0,100 27 560
800253 4x 6/6 3,15 1,0 16,0±1,0 20,0±1,5 700 3,11 0,094 34 840
800259 4x 10/10 4,05 1,0 18,0±1,0 22,5±1,0 930 1,84 0,088 47 1400
800265 4x 16/16 5,15 1,0 21,0+1,5 26,0±1,5 1370 1,16 0,082 63 2240
800271* 4x 25/16 6,40 1,2 25,0±1,5 29,5±1,5 1850 0,734 0,081 84 3500
800277 4x 35/16 7,65 1,2 28,0±1,5 33,0±2,0 2370 0,529 0,078 100 4900
800283* 4x 50/25 9,00 1,4 33,0±2,0 38,5±2,0 3280 0,391 0,078 125 7000
800289 4x 70/35 10,85 1,4 37,0±2,0 43,5±2,5 4390 0,270 0,077 160 9800
800296 4x 95/50 12,60 1,6 42,5±2,5 49,0±2,5 5830 0,195 0,075 195 13300
800304 4x 120/60 14,20 1,6 46,0±2,5 53,5±3,0 7180 0,154 0,073 225 16800
- 4x 185/95* 16,80 2,0 58,0±3,0 68,5±3,5 12000 0,100 0,073 290 25900
800220 5x 1,5/6 1,60 1,0 13,0±1,0 17,0±1,0 460 12,2 0,115 12 210
800221* 7x 1,5/6 1,60 1,0 14,5±1,0 18,0±1,0 520 12,2 0,115 10 210
800237* 7x 2,5/6 2,00 1,0 15,5±1,0 19,5±1,0 650 7,56 0,107 15 350
800222* 12x 1,5/10 1,60 1,0 19,0±1,0 23,0±1,5 780 12,2 0,115 9 210
800238 12x 2,5/10 2,00 1,0 21,0±1,5 25,0±1,5 980 7,56 0,107 12 350
800223* 19x 1,5/10 1,60 1,0 22,5±1,5 27,0±1,5 1080 12,2 0,115 8 210
800239 19x 2,5/10 2,00 1,0 24,5±1,5 29,0±1,5 1350 7,56 0,107 11 350
800224 27x 1,5/10 1,60 1,0 27,0±1,5 31,5±2,0 1440 12,2 0,115 6,5 210
800240 27x 2,5/16 2,00 1,0 29,5±1,5 34,5±2,0 1810 7,56 0,107 9 350
800225 37x 1,5/16 1,60 1,0 30,5±2,0 35,5±2,0 1840 12,2 0,115 6 210
800241 37x 2,5/16 2,00 1,0 33,5±2,0 39,0±2,0 2370 7,56 0,107 8 350
?? ?
Having trouble finding THE PRODUCTS
204-05
DRAKA USA
SHIPBOARD CABLE
One- and Two-Conductor, Medium Voltage, 600 Volts
Stranded, bare copper conductors with color-coded Type X (crosslinked polyethylene) insulation cabled with fillers and
covered with a polyester binder tape and a moisture-resistant PVC jacket.
weave armored SXIU/A/B-250 250 (37x) 0.575 359 0.890 990 0.940 1130 1250
SXIU/A/B-350 350 (37x) 0.681 446 1.000 1334 1.050 1495 1605
Type SXIB – Bronze basket SXIU/A/B-500 500 (37x) 0.814 560 1.140 1842 1.190 2000 2130
weave armored SXIU/A/B-750 750 (61x) 0.998 723 1.340 2708 1.390 2920 3060
The values for maximum amps are for 90°C conductor and 45°C ambient temperatures.
All cables listed above pass the IEEE 45 flame test and meet the requirements of tables A10, A11 and A12.
These same cable constructions are also used as cable cores for armored constructions.
weave armored DXIU/A/B-250 250 (37x) 0.575 316 1.650 2117 1.700 2565 2725
DXIU/A/B-350 350 (37x) 0.681 387 1.940 2971 1.990 3300 3500
Type DXIB – Bronze basket DXIU/A/B-500 500 (37x) 0.814 479 2.220 4067 2.270 4460 4670
weave armored DXIU/A/B-750 750 (61x) 0.998 602 2.630 5916 2.680 6445 6785
The values for maximum amps are for 90°C conductor and 45°C ambient temperatures.
All cables listed above pass the IEEE 45 flame test and meet the requirements of tables A10, A11 and A12.
These same cable constructions are also used as cable cores for armored constructions.
205-05
DRAKA USA
SHIPBOARD CABLE
Three- and Four-Conductor, Medium Voltage, 600 Volts
Stranded, bare copper conductors with color-coded Type X (crosslinked polyethylene) insulation cabled with fillers and
covered with a polyester binder tape and a moisture-resistant PVC jacket.
Type TXIU – Unarmored TXIU/A/B-106 1/0 (19x) 0.373 150 1.270 1401 1.320 1660 1790
TXIU/A/B-133 2/0 (19x) 0.418 173 1.380 1704 1.430 1820 1960
Type TXIA – Aluminum basket TXIU/A/B-168 3/0 (19x) 0.470 201 1.490 2085 1.540 2180 2330
weave armored TXIU/A/B-212 4/0 (19x) 0.528 232 1.630 2524 1.680 2540 2710
Type TXIB – Bronze basket TXIU/A/B-250 250 (37x) 0.575 259 1.830 3139 1.880 3340 3530
weave armored TXIU/A/B-350 350 (37x) 0.681 317 2.080 4166 2.130 4540 4750
TXIU/A/B-500 500 (37x) 0.814 393 2.370 5846 2.420 6160 6410
TXIU/A/B-750 750 (61x) 0.998 494 2.810 8776 2.860 9190 9490
The values for maximum amps are for 90°C conductor and 45°C ambient temperatures.
All cables listed above pass the IEEE 45 flame test and meet the requirements of tables A10, A11 and A12.
These same cable constructions are also used as cable cores for armored constructions.
The values for maximum amps are for 90°C conductor and 45°C ambient temperatures.
All cables listed above pass the IEEE 45 flame test and meet the requirements of tables A10, A11 and A12.
These same cable constructions are also used as cable cores for armored constructions.
206-05
DRAKA USA
OFFSHORE CABLE
One & Two Conductor, Medium Voltage, 600 Volts
Soft annealed tinned copper conductors, Type P chemically crosslinked polyolefin (XLPO) insulation meeting
specification IEEE 1580 covered with a jacket of flame retardant Arctic Neoprene.
1/C POWER
Insulation
IEEE 1580 Offshore Cable: IEEE-45 Conductor Size Wall Thickness Cable Diameter Approx. Weight
One Conductor, 600 Volts Cable Type AWG/MCM mm2 Stranding Inches mm Inches mm Lbs/M kg/km
Crosslinked Polyolefin (Type P) Insulation SP-18 18 0.96 19/30 .030 .76 .115 2.92 11 16
SP-16 16 1.23 19/29 .030 .76 .120 3.05 13 19
Neoprene Jacket SP-14 14 1.94 19/27 .030 .76 .135 3.43 18 27
SP-12 12 3.08 19/25 .030 .76 .150 3.81 26 39
SP-10 10 5.53 27/24 .030 .76 .185 4.70 44 65
SP-8 8 7.57 37/24 .045 1.14 .235 5.97 64 96
SP-6 6 12.5 61/24 .045 1.14 .295 7.49 100 149
SP-5 5 18.6 91/24 .045 1.14 .335 8.51 145 216
SP-4 4 21.5 105/24 .045 1.14 .355 9.02 170 253
SP-3 3 25.6 125/24 .045 1.14 .380 9.65 200 298
SP-2 2 30.7 150/24 .045 1.14 .410 10.41 230 342
SP-1 1 46.0 225/24 .055 1.40 .495 12.57 350 521
SP-1/0 1/0 56.3 275/24 .055 1.40 .550 13.97 420 625
SP-2/0 2/0 66.5 325/24 .055 1.40 .565 14.35 480 714
SP-3/0 3/0 92.1 450/24 .055 1.40 .670 17.02 670 997
SP-4/0 4/0 112.6 550/24 .055 1.40 .720 18.29 815 1213
SP-262 262 133.0 650/24 .065 1.65 .790 20.07 965 1437
Available in: SP-313 313 158.6 775/24 .065 1.65 .860 21.84 1135 1690
• Unarmored SP-373 373 189.3 925/24 .065 1.65 .930 23.62 1345 2002
SP-444 444 225.1 1100/24 .065 1.65 1.000 25.54 1600 2382
• Armored SP-535 535 271.2 1325/24 .080 2.03 1.110 28.20 1935 2880
• Armored & Sheathed SP-646 646 327.5 1600/24 .080 2.03 1.210 30.73 2300 3423
SP-777 777 393.8 1925/24 .080 2.03 1.300 33.02 2755 4100
SP-1111 1111 562.8 2750/24 .110 2.80 1.570 39.88 3940 5864
207-05
DRAKA USA
OFFSHORE CABLE
Three & Four Conductor, Medium Voltage, 600 Volts
Soft annealed tinned copper conductors, Type P chemically crosslinked polyolefin (XLPO) insulation meeting
specification IEEE 1580 covered with a jacket of flame retardant Arctic Neoprene.
208-05
ROXTEC INC.
CABLE & PIPE TRANSIT SYSTEM COMPONENTS
S Frames SR Frame
Packing space for S Frame
Packing space is the usable area inside each frame for
modules/cables (compression unit excluded).
Model No.
Sq. Rounded X width (mm) Y height (mm)
S-2 — 120 60
S-4 SR-4 120 120
S-6 SR-6 120 180
S-8 SR-8 120 240
S Frame—Basic type for weldings. SR Frames
S frame Materials: Primed mild steel, Acid proof stainless steel, • Designed for use in decks & bulkheads subject to high degrees of stress.
Aluminium. • The frames are reinforced with a banded construction 80 mm wide, with
rounded corners (radius 70 mm).
• The S frame should be welded to the construction. • The SR Frame should be welded to the construction.
• Recommended hole dimension in the construction: • Recommended hole dimension in the construction; external contour
Height: external frame height plus 2– 4 mm (outline?) height/width plus 2-4 mm (according to welding instructions).
Width: external frame width plus 2– 4 mm • Top and bottom reinforcement are also available.
RM Modules
Standard RM Modules RM 40 Special RM Modules RM 20w40
For Cable/pipe External dim. [mm] For Cable/pipe External dim. [mm]
Module type diameter 0/ [mm] (height width depth) Module type diameter 0/ [mm] (height width depth)
RM 20 0 4-13.5 20 20 60 RM 15 0 3.5-10.5 15 15 60
RM 30 0 10-25 30 30 60 RM 15w40 0 3 3.5-10.5 15 40 60
RM 40 0 22-32.5 40 40 60 RM 20w40 0 2 3.5-14.5 20 40 60
RM 60 0 28-54 60 60 60 RM 40/10-32 0 9.5-32.5 40 40 60
RM 90 0 48-71 90 90 60 RM 60/20-50 0 50-20 60 60 60
RM 120 0 68-99 120 120 60
Compression unit for S, SF, SR, SO, SFO, SK, SBTB, and KFO frames.
Part Components Materials
Wedge 120 Main body part Roxylon rubber
Fittings, bolts Galvanized steel or acid proof stainless steel.
Roxtec Inc.
www.roxtec.com P.O. Box 690177, Tulsa OK 74169
PHONE 800 520-4769 • FAX 918 254 2544
Please see our full page ad in the Advertising Section EMAIL info@roxtecinc.com
0209-03 4/27/05 1:59 PM Page 1
209-05
ROXTEC INC.
CABLE & PIPE TRANSIT SYSTEM COMPONENTS
R Frames
Sealing Systems for multi-cable and pipe penetrations through round holes.
RS Seals
A Circular Sealing System for single cable or pipe penetrations in metal sleeves.
Each seal consists of two halves, and the centre core of the seal is adaptable to fit cables or pipes of a wide range, using MultiDiameter technology.
The RS penetration is sealed by tightening the screws on the front fittings, causing the penetration to compress and subsequently seal the cable or
the pipe.
Roxtec Inc.
www.roxtec.com P.O. Box 690177, Tulsa OK 74169
PHONE 800 520-4769 • FAX 918 254 2544
Please see our full page ad in the Advertising Section EMAIL info@roxtecinc.com
Roxtec 3002 4/27/05 2:00 PM Page 1
210-05
ROXTEC, INC.
GHM FRAME
CABLE & PIPE TRANSIT SYSTEM COMPONENTS
The GHM frame was
developed for applications
where welding is not suitable.
The flange has a pre-defined
hole pattern adapted to handle
the exposure levels the frame
has been tested for. The
frame is delivered with a TSL
15 x 6 sealing strip. The GHM
frame’s relatively low weight
compared to SF frames
makes it easier to handle
during installation.
Roxtec Inc.
www.roxtec.com P.O. Box 690177, Tulsa OK 74169
PHONE 800 520-4769 • FAX 918 254 2544
Please see our full page ad in the Advertising Section EMAIL info@roxtecinc.com
Roxtec 5/2/05 1:18 PM Page 1
211-05
ROXTEC, INC.
Cable & Pipe Transit System Components
For Non-Welded Installation
The RX and RS X kits consist of a round
penetration and sleeve solution attached
to the construction through expansion,
when welding is not allowed or desired.
The specially designed expansion sleeve
has a rubber gasket on the outside. As
the bolts on the sleeve are tightened, the
gasket expands in the hole to firm
attachment. An R frame or an RS seal is
then fitted into the opening of the sleeve.
R Frame Galvanized R Frame Acid Proof Stainless Steel Packing Aperture External Dimensions Sleeve
Space ØxD Wt.
Kit Art. No. Kit Art No. mm mm in mm in kg lbs.
– – RX 75AISI 316/galv. RXG 0000751021 40 x 40 116 4.567 165 x 55 6.496 x 2.165 1.6 3.527
RX 100 galv./galv. RXG 0001001018 RX 100AISI 316/galv. RXG 0001001021 60 x 60 146 5.748 195 x 55 7.677 x 2.165 2.2 4.850
RX 125 galv./galv. RXG 0001251018 RX 125AISI 316/galv. RXG 0001251021 80 x 80 171 6.732 213 x 55 8.386 x 2.165 2.8 6.173
RX 150 galv./galv. RXG 0001501018 RX 150AISI 316/galv. RXG 0001501021 90 x 90 200 7.874 236 x 55 9.291 x 2.165 3.5 7.716
RX 200 galv./galv. RXG 0002001018 RX 200AISI 316/galv. RXG 0002001021 120 x 120 251 9.882 290 x 55 11.417 x 2.165 4.6 10.141
Roxtec Inc.
www.roxtec.com P.O. Box 690177, Tulsa OK 74169
PHONE 800 520-4769 • FAX 918 254 2544
Please see our full page ad in the Advertising Section EMAIL info@roxtecinc.com
0210-03 4/27/05 2:03 PM Page 1
212-05
ROXTEC INC.
RS OMD Cable/Pipe Sleeve
Intended for single cable and pipe penetrations. Multidiameter
interior layers of rubber can be peeled away, adjusting the seal to fit
cable and pipe of varying diameters. The RS OMD seal also has
exterior layers which make it possible to adjust the seal to fit pipe
sleeves of different diameters. Only 8 sizes of seals are needed to
seal cables and pipes from 3.6mm to 119mm in diameter, in sleeves
with a diameter span of 23mm to 168mm.
The halogen free elastomer was specially developed for optimum sealing capacity in
fireproof applications and demanding environments. The rubber in the seals also reduces
the risk of damage to the hull caused by vibrations, induced by for example hydraulic
systems, and mechanical noise reduction of pipes. RS OMD seals are approved for use in
A 60-rated sections and are watertight and gastight up to 4 bar. They are available with
front/end fittings in acid-proof stainless steel AISI 316/Roxylon rubber.
Cable/Pipe Ext. diam. Depth Inner diam.
Type 0/ [mm] 0/ [mm] [mm] 0/ [mm]
RS-23 OMD 3.6-11 23 - 2.75 41 23 - 28
RS-31 OMD 4-17 31 - 35.5 41 31 - 37
RS-43 OMD 4-23 43 - 51 80 43 - 52
RS-50 OMD 8-30 50 - 58 80 50 - 59
RS-68 OMD 26-48 68 - 76.5 80 68 - 78
RS-100 OMD 48-70 100 - 108 83 100 - 109
RS-125 OMD* 68-98 125 - 143 83 125 - 144
RS-150 OMD* 93-119 150 - 167 85 150 - 168
* Supplied without a solid center core. Solid center core is optional for RS 125 OMD.
Roxtec Inc.
www.roxtec.com P.O. Box 690177, Tulsa OK 74169
PHONE 800 520-4769 • FAX 918 254 2544
Please see our full page ad in the Advertising Section EMAIL info@roxtecinc.com
0211-04 4/27/05 2:04 PM Page 1
213-05
316 Stainless Steel Band (PPA 571 Coated) Pkg. Qty 1 Type 201 Band - with EASY SCALE imprint
Cat. Width Length Weight 100 Ft. Per Roll (30.5M) Type 201 Stainless Steel
No In mm Ft M Lbs Kg Cat Width Thickness Weight
AE432 1/4 6.35 82.5 25 2.0 .9 No. Inches mm Inches mm Lbs Kg
AE433 3/8 9.53 82.5 25 2.6 1.2 C201 3/16 4.76 .015 .38 1.2 .54
AE434 1/2 12.70 82.5 25 3.5 1.6 C202 1/4 6.35 .020 .51 1.7 .77
AE435* 5/8 15.88 82.5 25 4.4 2.0 C203 3/8 9.53 .025 .63 3.2 1.6
AE436 3/4 19.05 82.5 25 5.3 2.4 C204 1/2 12.70 .030 .76 5.1 2.4
C205 5/8 15.88 .030 .76 6.4 3.0
Note: Thickness = .018" (.457 mm) S.S., when coated = .048" (1.22 mm) 3/4
C206 19.05 .030 .76 7.7 3.6
316 Stainless Steel Band Also available in mill coil lengths. All sizes available in standard
(Uncoated) Pkg. Qty 1 Thickness: 015" (.38 mm) cardboard packaging. All sizes except for 1/4" (C202) and 3/16"
(C201) available in plastic Tote packaging.
AE442 1/4 6.35 82.5 25 2.0 .9
AE443 3/8 9.53 82.5 25 2.6 1.2
AE444 1/2 12.70 82.5 25 3.5 1.6
AE445* 5/8 15.88 82.5 25 4.4 2.0
AE446 3/4 19.05 82.5 25 5.3 2.4
*Coast Guard approved Plastic Totes
100 Ft. Per Roll (30.5M)
Type 201 Stainless Steel
Plastic Totes (complete with band)
Cat. Width Thickness Weight
All Purpose Band No. Description Inches mm Inchesmm Lbs Kg
Metal Thickness .030" (.75 mm) Coated Thickness .050" (1.3 mm) C203Y 3/8" Band in Yellow Tote 3/8 9.53 .025 .63 3.62 1.6
C204B 1/2" Band in Blue Tote 1/2 12.70 .030 .76 5.56 2.5
Type 316 Stainless Steel (PPA 571 Coated)
C205G 5/8" Band in Green Tote 5/8 15.88 .030 .76 6.85 3.1
Cat. Width Length Weight Hole Diameter
C206R 3/4" Band in Red Tote 3/4 19.05 .030 .76 8.16 3.7
No. In mm Ft M Lbs Kg In mm
1/2 3/16
AE465 12 33 10 1.2 .6 5 Ratchet Tool
AE466 3/4 17 33 10 2.1 1.0 9/32 7
AE467 1 26 33 10 2.9 1.3 5/16 8 Cat. Description Weight
AE475 1/2 12 82.5 25 3.1 1.4 3/16 5 No. Lbs Kg
AE476 3/4 17 82.5 25 5.3 2.4 9/32 7 C400 Band/buckle 3.4 1.5
AE477 1 26 82.5 25 7.3 3.3 5/16 8
1/2 3/16
ratchet tool
AB465 12 9.9 3 .4 .2 5
AB466 3/4 17 9.9 3 .4 .2 9/32 7
Banding Tool
Type 316 Stainless Steel (Uncoated)
AE405 1/2 12 33 10 1.2 .6 3/16 5 Cat. Description Weight
AE406 3/4 17 33 10 1.9 .9 9/32 7 No. Lbs Kg
AE407 1 26 33 10 2.2 1.0 5/16 8 C001 Banding Tool 4.4 2.0
AE425 1/2 12 82.5 25 3.1 1.4 3/16 5
AE426 3/4 17 82.5 25 4.6 2.1 9/32 7 Bantam Tool C075
AE427 1 26 82.5 25 5.5 2.5 5/16 8 C075 3-way handle version 2.6 1.2
AB405 1/2 12 9.9 3 .4 .2 3/16 5 for one-hand pistol grip or
AB406 3/4 17 9.9 3 .4 .2 9/32 7 two-hand tensioning
Galvanized Carbon Steel (PPA 571 Coated)
AE565 1/2 12 33 10 1.2 .6 3/16 5
Cable Tie Tensioner
AE566 3/4 17 33 10 2.1 1.0 9/32 7 AE200 For Tensioning 6 .3
AE567 1 26 33 10 4.0 1.8 5/16 8 Ties and
AE575 1/2 12 82.5 25 3.1 1.4 3/16 5 Multi-Lok Ties
AE576 3/4 17 82.5 25 5.3 2.4 9/32 7
AE577 1 26 82.5 25 9.9 4.5 5/16 8 Tensioning Hook
AB565 1/2 12 9.9 3 .4 .2 3/16 5 AE201 For Tensioning .1 .05
AB566 3/4 17 9.9 3 .4 .2 9/32 7 Ties and
Multi-Lok Ties
214-05
Ball-Lok Tools
Cat. Weight
No. Description Lb Kg
K502 Hand tool to apply all sizes of Ball-Lok Ties. .94 .43
Adjustable tension, automatic cut-off.
215-05
Approvals: – UL
– CE
– DNV
Reusable Stainless Steel Ties – U.S.C.G.
(Coated with Nylon 11) 200-300 Stainless Steel Multi-Lok Ties Type 316 Stainless Steel
Tensioning Hook
Pkg Qty 1
AE201 For Tensioning Reusable Ties and .1 .05
Multi-Lok Ties
BAND-LOK Tool
BAND-LOK Ties
Cat. Weight
201 Stainless
No. Description Lbs. Kg
Package Qty: 100/bag
Width: 5/16” (7.9mm) Thickness: .015" (.38mm) A950 Hand tool for applying BAND-LOK Ties .94 .43
with adjustable tension, automatic cut-off
Cat. Clamp Length Max Bundle Dia. Weight
No. In mm In mm Lbs. Kg Thriftool Tool
BL211 10 254 2 51 1.35 .61
J075 Thriftool -10 per carton 5.90 2.7
BL212 16 406 3.5 89 2.29 1.03
J076 Thriftool -100 pack 55.30 25.1
BL 213 19 482 5 127 3.10 1.41
BL214 27 686 7 178 3.91 1.77 Pok-It II Tool
BL215 34 864 9 229 4.72 2.14
J020 Pok-It II Tool 1.1 .5
216-05
Thriftool
Cat. Weight
No. Description Lbs Kg
Thriftool J075 Thriftool - 10 per carton 5.90 2.7
J076 Thriftool - 100 pack 55.30 25.1
Replacement Part
J072 Winding Mandrel .09 .04
Pok-It II Tool
Cat. Weight
Pok-It II Tool No. Pkg Qty Lbs Kg
J020 Pok-It II Tool 1 1.1 .5
Replacement Parts
Free-end clamp J027 Winding Mandrel Assembly 1 .54 .24
(Includes Wrench)
J024 Locking Pawl 1 .04 .02
217-05
TY523M
Tie body width .091"
Standard Nylon 6/6 Cable Ties
Maximum
TY524 Wire
Tie body width .140"
Body Bundle Military Tensile Bulk
Cat. Bulk Pkg. Width Length Dia. Standard Strength Unit Std. Pkg.
TY525M No. Cat. No. (in.) (in.) (in.) Part No. (lbs.) Quan. Pkg. Quan.
Tie body width .184"
TY523M TY23M .091 3.62 .625 MS3367-4 18 100 1000 1000
TY5272M TY52315M TYB2315M .091 7.00 1.500 — 18 100 500 1000
Actual size body width .270" TY5232M TY232M .091 8.00 2.000 — 18 100 500 1000
TY5234M TY234M .091 14.00 4.000 — 18 100 500 1000
TY524M TY24M .140 5.50 1.125 MS3367-5 30 100 1000 1000
TY5242M TY242M .140 8.19 2.000 — 30 100 500 1000
TY533M
TY526M TY26M .140 11.10 3.000 — 30 100 500 1000
TY5244M TY244M .140 14.50 4.000 — 30 100 500 1000
TY525M TY25M .184 7.31 1.750 MS3367-1 50 100 1000 1000
TY534M TY5253M TY253M .184 11.40 3.000 MS3367-7 50 100 1000 1000
TY528M TY28M .184 14.20 4.000 MS3367-2 50 100 500 1000
TY5272M† TY272M† .270 8.75 2.000 — 120 50 250 500
TY535M
TY5354M TY527M† TY27M† .270 13.40 3.500 MS3367-3 120 50 500 500
TY5275M TY275M .270 18.00 5.000 — 120 50 500 500
TY5277M TY277M .270 24.30 7.000 — 120 50 500 500
TY529M TY29M .301 30.00 9.000 MS3367-6 120 50 500 500
TY537M TY53510M† – .320 35.00 10.000 — 175 25 250 —
TY54513M† – .320 45.00 13.000 — 175 25 250 —
Cable ties made from natural nylon 6/6 are excellent performers in most applications. Nylon 6/6 is recommended for use in temperatures
ranging from 185°F to -40°F.
†
®
®
Recognized Models.
TY551M
TY5512M
?? ?
Having trouble finding THE PRODUCTS
218-05
Wire Connectors
Free Spring Wire Connectors Fixed Spring Wire Connectors
Cat. Copper Wire Only Dimensions (in.) Cat. Copper Wire Only Dimensions (in.)
No. Model Range Min. Max. Quantity A B C D E No. Model Range Min. Max. Quantity A B C D
10-602 Ctn./100 10-100 Ctn./100
10-612 Hi-Y 22–10 2 #18 3 #12 Ctn./1,000 15/64 1-3/64 5/16 27/64 41/64 10-110 Hi-0 22-16 1 #20 2 #16 Ctn./1,000 13/64 9/16 21/64 1/4
10-652 SOL Keg/500 10-120 w/1 #22 Keg/25,000
10-604 Ctn./100 10-102 Ctn./100
10-614 Hi-R 18-8 2 #16 5 #12 Ctn./1,000 19/64 1-3/16 7/16 33/64 25/32 3 #16
SOL Fixed 10-112 Hi-2 22-14 3 #22 Ctn./1,000 1/4 11/16 3/8 5/16
10-654 Bag/500 10-122 Keg/10,000
10-606 Ctn. /50 Spring
3 #10 10-103 Ctn. /100
10-616 Hi-G 18-8 2 #12 Ctn./1,000 5/16 1-5/16 15/32 37/64 27/32 10-113 Hi-3 22-14 3 #22 2 #14 Ctn./1,000 5/16 27/32 7/16 3/8
10-656 w/1 #12 Bag/250 w/1 #18
10-153 Bag/500
10-608 Ctn./50 10-104 Ctn./100
10-618 Hi-B 14-6 1 #10 1 #6 Ctn./1,000 3/8 1-39/64 37/64 11/16 1-3/32 10-114 Hi-4 18-10 1 #14 1 #10 Ctn./1,000 13/32 15/16 35/64 15/32
10-658 w/1 #12 w/2 #8 Bag/250 w/1 #18 w/1 #14
10-154 Bag/500
10-106 Ctn./100
File No. E17010 File No. LR6541 10-116 Hi-6 18-10 2 #14 4 #12 Ctn./1,000 15/32 1-3/64 21/32 17/32
10-156 Bag/250
Free Spring
Specialty Electrician’s Tools Fish Tapes - Conduit Fishing Tools
Fuse Pullers Oil tempered flat spring
• Rugged fiber construction steel fish tape in
• Plier design dispenser/storage reel.
• Helps prevent bending of fuse clips • One piece, high-impact case.
Cat. No. Description Wt. Per 100 • Durable, easy grip handle and brake.
19-164 Pocket size – 0-200 amps, 250 V 17
• Slip resistant inner ring.
& 1-100 amps 600 V • Enlarged tape viewports.
19-165 Midget size – For small fuses 3/16” 17
Cat. No. Description Wt. Per 100
to 1/2” dia.
19-166 Giant size – 100-600 amps, 250 V 33 14-250 8-1/2” reel dia. –1/8” x .060” x 50’ 208
& 60-400 amps, 600 V 14-251 8-1/2” reel dia. –1/8” x .045” x 50’ 183
14-258 12” reel dia. – 1/8” x .060” x 100’ 400
Standard Carton 1. Standard Package 6.
14-259 12” reel dia. – 1/8” x .060” x 200’ 650
14-260 12” reel dia. – 1/4” x .060” x 100’ 666
Wire Strippers & Cable Rippers Standard Carton 1. Standard Package 6.
Wire Stripper 19-850 & 19-850S
Accessories
• Sizes, strips and cuts wire #16-6 solid, #18-8 stranded. Cat. No. Description Wt. Per 100
• Model 18-850S has anchored handle spring for easy handle
14-223 Handle for 8-1/2” reel 12
operation. Spring stays put. 14-225 8-1/2” reel case only 50
• Model 18-850, without spring, stays closed in pouch. Curved, 14-227 Handle for 12” reel 12
cushioned handles allow easy comfortable operation. 14-228 12” reel case only 75
• Conduit reaming nose, wire looping holes. Standard Carton 1. Standard Package 1.
• Adjustable hinge bolt assures stripping blade alignment.
• 1/2” cutting blade is hardened to hold the edge. Steel Fish Tape Coils
• Made of premium tool steel. Spring steel fish tape in coils.
Cat. No. Description Wt. Per 100 Without dispenser reel.
18-800 Big-7” Wiring Tool 50
• Oil temperd, flat spring steel.
19-850 Little-7” w/o Spring 58
19-850S Little-7” Wire Spring 58 • Rigid, with flexible spring action.
• Excellent tensile strength.
Standard Carton 1. Standard Package 6.
• Comes with preformed hook.
Combination Wiring Tool 18-800 Cat. No. Description Wt. Per 100
• Sizes, strips and cuts wire #16-6 solid, #18-8 stranded. 14-205 50’ x 1/8” x .045” (3/64”) 125
14-206 100’ x 1/8” x .045” (3/64”) 250
• Sizes, threads and cuts bolts, 4-40, 6-32, 8-32, 10-32, 10-24.
14-207 50’ x 1/8” x .060” (1/16”) 158
• Crimps bare and insulated terminals #22-10 AWG. 14-208 100’ x 1/8” x .060” (1/16”) 300
• Conduit reaming nose, wire looping holes. 14-209 200’ x 1/8” x .060” (1/16”) 538
• Adjustable hinge bolt assures stripping blade alignment. 14-210 100’ x 1/4” x .060” (1/16”) 567
• 1/2” cutting blade is hardened to hold the edge. 14-211 200’ x 1/4” x .060” (1/16”) 1100
?? ?
Having trouble finding THE PRODUCTS
219-05
CRIMP TERMINALS
1 250 Series – Female
RA18-250F Disconnects
Nylon Insulated Ring – Non-Insulated Ring nylon self-insulated
Cat. Pkg. Wire Max.
installing tools – WT145C,
No. Qty. Range Ins.
Insulation Grip Cat. Bolt WT2000, ERG-2001,
ERG-2003, WT112M
No. Hole 1 RA18-250F 100 22-18 .136
Cat. Bolt Pkg. Qty. 25, 9-8-7 Wire Range RB14-250F 100 16-14 .162
No. Hole D8-10* #10 2 RC10-250F 50 12-10 .215
Pkg. Qty. 100, 22-16 Wire Range, .136 Max. Ins. D8-14* b" 2 18RA-250F 100 22-18 .150
RA18-4 #4 D8-516* j" 18RA-250F 14RB-250F 100 16-14 .170
D8-38* c" vinyl self-insulated 10RC-250F 50 12-10 .250
RA18-6 #6
D8-12* d" installing tools – WT145C,
RA18-8 #8 WT2000, ERG-2001,
18RA-2577 100 22-18 .165
RA18-10 #10 Pkg. Qty. 200, 9-8-7 Wire Range ERG-2003, WT112M 14RB-2577 100 16-14 .185
3
RA18-14 b" D10161 #8 10RC-2577 50 12-10 .225
RA18-516 j" D10361 #10
RA18-38 c" D10711 b" 3 4 RAS18-250AX 50 22-18 .170
RA18-12 d" D10721 j" RBS14-250AX 50 16-14 .200
D10731 c" 18RA-2577 RCS10-250AX 25 12-10 .250
Pkg. Qty. 100, 18-14 Wire Range, .162 Max. Ins.
D975* d" nylon fully-insulated
RB14-4 #4 installing tools – WT145C, Material: brass
RB14-6 #6 Pkg. Qty. 20, 6-5 Wire Range WT2000, ERG-2001, Finish: tin plated
RB14-8 #8 E6-10* #10 ERG-2003, WT112M
RB14-10 #10 E6-14* b" U.L. Listed E66716
RB14-14 b" E6-516* j"
RB14-516 j" E6-38* c" 4
RB14-38 c" E6-12* d"
RB14-12 d"
Pkg. Qty. 200, 6-5 Wire Range
RAS18-250AX 250 Series – Male Tabs
heat-shrinkable fully
Pkg. Qty. 50, 12-10 Wire Range, .210 Max. Ins. E10261 #10 insulated disconnects Tab size - .250 x .032
RC10-6 #6 E10711 b" installing tool – WT1255 Cat. Pkg. Wire Max.
RC10-8 #8 E10721 j"
RC10-10 #10 No. Qty. Range Ins.
E10731 c"
RC10-14 b" 18RA-250T 100 22-18 .150
Pkg. Qty. 20, 4-3 Wire Range 5 5
RC10-516 j" 14RB-250T 100 16-14 .170
F4-10* #10
RC10-38 c" 10RC-250T 50 12-10 .250
F4-14* b" 18RA-250T
RC10-12 d"
F4-516* j" vinyl self-insulated 18RA-251T 50 22-18 .150
U.L. Listed E9809 F4-38* c" 6
installing tools – WT145C, 14RB-251T 50 16-14 .170
F4-12* d" WT2000, ERG-2001, 10RC-251T 25 12-10 .210
Pkg. Qty. 100, 4-3 Wire Range ERG-2003, WT112M
18RAS-251TX 50 22-18 .170
F10261 #10 7 14RBS-251TX 100 16-14 .200
F10711 b"
6 10RCS-251TX 100 12-10 .250
F10721 j"
F10731 c"
8
* Not available on Mylar Tape. A18-250T 100 22-18 –
18RA-251T B14-250T 100 20-14 –
Installing tools: ERG-2005 (D Series only)
Nylon Insulated Fork – WT115A,D, E, F & G, TBM6/TBM65, WT3185
nylon fully insulated
installing tools – WT145C,
9
WT2000, ERG-2001, A18-251T 100 22-18 –
Insulation Grip ERG-2003, WT112M B14-251T 100 16-14 –
Cat. Bolt C10-251T 50 12-10 –
No. Hole Non-Insulated Fork 7
Pkg. Qty. 100, 22-16 Wire Range, .136 Max. Ins. Material: brass
RA18-6F #6 Cat. Bolt 18RAS-251TX
RA18-8F #8 No. Hole heat shrinkable nylon fully Finish: tin plated
Pkg. Qty. 100, 22-16 Wire Range insulated
RA18-10F #10
installing tool – WT1255
RA18-14F b" A18-6F #6
Pkg. Qty. 100, 18-14 Wire Range, .162 Max. Ins. A18-8F
A18-10F
#8
#10 8
Installation Tools
RB14-6F #6
RB14-8F #8 Pkg. Qty. 100, 18-14 Wire Range
RB14-10F #10 B14-6F #6 A18-250T
Non-insulated/insulated grip
RB14-14F b" B14-8F #8 installing tool – WT110M
Pkg. Qty. 50, 12-10 Wire Range, .210 Max. Ins. B14-10F #10
RC10-6F #6 B14-14F b"
9 WT112M
RC10-8F #8 Pkg. Qty. 50, 12-10 Wire Range
RC10-10F #10 C10-6F #6
RC10-14F b" C10-8F #8 18-251T
C10-10F #10 Non-insulated
U.L. Listed E9809 installing tools – WT110M,
C10-14F b"
Installing tools: WT145C, WT2000, WT112M, WT111M, WT2000,
U.L. Listed E9809 WT112M, ERG-2002, WT112M
ERG-2001, ERG-2003, WT145A
Installing tools: WT111M, WT112M, ERG2001
WT110M, WT2000, ERG-2002
www.manning-electric.com
Stocking Distributor for
MIPCO Russellstoll ®
TM
Thomas & Betts
154 27 th Street — Brooklyn, NY 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
0218-04 4/27/05 2:12 PM Page 218
220-05
Tooling for Heavy Duty Battery Connectors & Battery Connectors – Code Copper
Conductor Conductor (for 600V)
Two-Way Connectors
BCT840, BCT840S TBM8250, TBM8250S, Cat. Cable Dimensions (in.)
TBM8250-BM, No. Size A E J
TBM8250S-BM
32503 †
14 sol. to 8 sol. 1a c v
32505† 8 sol. to 4 str. 1c d w
32507 4 sol. to 1 str. 1e e B
32509 1 sol. to 2/0 1g f 1o
32511 2/0 to 4/0 2j n 1b
TBM101, TBM101S 364RF 32513 4/0 to 300 2l 1a 1d
32515 300 to 500 2f 1b 1A
32517 500 to 750 3a 1d 2h
32519 750 to 1000 3g 1L 2s
Cable Cutter
Cat.
No. Description Two-Bolt Hole
364RF • Cuts cable up to 350 MCM Cat. Cable Dimensions (in.)
• Fiberglass handles and carbon steel blades No. Size G A B C D J F H
• For copper and aluminum cable only
32003† 14 to 8 b 1L 1b d a v s e
TBM250C • Cuts cable up to 250 MCM 32005† 8 to 4 b 1f 1b d a w s e
TBM250C-BM • For copper and aluminum cable only 32007 4 to 1 b 2b 1k e r g s f
• Available in a bench mount style (-BM) 32009 1 to 2/0 c 2g 1n m b u k 1
32011 2/0 to 4/0 c 3a 2 1 s n k 1
32013 4/0 to 300 c 3c 2a 1i j 1l k 1
Cable Stripper 32015 300 to 500 c 3d 2a 1c X 1B k 1
32017 500 to 750 d 4x 3 1f u 2a l 1d
BCS8-40 • Cable stripper for cable 8 AWG-4/0 battery cable 32019 750 to 1000 d 4B 3 1g v 2X l 1d
• Replacement blade provided in the handle
† With Filister Head Screw. All others, hex head screws.
221-05
Installing Tools
Cat. No. TBM5 TBM8 Hydraulic Tools &
Female Male TBM25S TBM6, TBM6S, TBM60RS TBM5S TBM8S TBM50S Hand Tool
Disconnect Disconnect ERG2002 TBM20S Upper Die Lower Die Die Set Die Set Die Code Color
MD1614F-0 MD1614M-0 X
MD1614F-1 MD1614M-1 X
MD1210F-1 MD1210M-1 X
MD1210F-2 MD1210M-2 X
MD8F-1 MD8M-1 X 13475 13477 13454 13461 21 Red
MD8F-2 MD8M-2 X 13475 13477 13454 13461 21 Red
MD6F-1 MD6M-1 X 13475 13477 13454 13461 24 Blue
MD6F-2 MD6M-2 X 13475 13477 13454 13461 24 Blue
MD4F-2 MD4M-2 X 13472 13476 13454 13461 29 Gray
MD2F-2 MD2M-2 X 13474 13477 13454 13461 33 Brown
MD2F-3 MD2M-3 X 13474 13477 13454 13461 33 Brown
MD1F-2 MD1M-2 13474 13477 13455 13462 37 Green
MD1F-3 MD1M-3 13474 13477 13455 13462 37 Green
MD10F-3 MD10M-3 13475 13477 13455 13462 42 Pink
MD20F-3 MD20M-3 13474 13477 13455 13462 45 Black
MD30F-3 MD30M-3 13474 13477 13455 13462 50 Orange
MD40F-3 MD40M-3 13475 13477 13456 13463 54 Purple
Specifications: Wire range: No. 16 to 4/0 AWG. Rating: 600V, 90°C. Material: High conductivity copper. Plating: Tin. Insulator: Thermoplastic Elastomer. 1. Choose appropriate COLOR-KEYED® disconnect for
conductor size to be terminated. Note color of bands on disconnect barrel. 2. Select proper installing die by matching die color to disconnect barrel color bands. 3. Install die in tool, insert stripped wire into barrel
of disconnect and compress between color bands. Repeat for mating half. 4. Snap the two halves together and slip on insulator over mated connection. Secure insulator with TY-RAP® cable ties provided with the
insulators.
Operating Range: 600V max., 1000V max. in signs and fixtures. Listing: U.L. Listed and CSA Certified for 12 - 8 AWG solid copper conductors and stranded copper conductors in the sizes shown. Selection:
Always use the same body size when selecting male and female disconnects. For example, to connect a 2 AWG male to an 8 AWG female, select Catalog Numbers M2D2M-2 and MD8F-2. Both have body size 2.
Insulation: Use insulating boots matching the disconnect body size as indicated in the chart. To protect the connection from moisture and dirt use sealing compound Catalog Number MDBOOT-SEAL.
?? ?
Having trouble finding THE PRODUCTS
222-05
A CMP250-_-_
.250" (6.4) .125" (3.2) .025" (.6)
Minimum Maximum Recovered Nom. CPO250-_-_
Cat. Cable Expanded Recovered Wall Lgth. Std. CMP375-_-_
No. Range I.D. I.D. (in.) (in.) .375" (9.5) .187" (4.7) .025" (.6)
CPO375-_-_
Pkg.
CMP500-_-_
.500" (12.8) .250" (6.4) .025" (.6)
HSC8-4 #8 - #6 .510" .160" .090" 21⁄2" 100 CPO500-_-_
HSC2-20 #6 - #2 .750" .240" .090" 21⁄2" 100 CMP750-_-_ .750" (19.1) .375" (9.5) .030" (.8)
HSC30-250 #1 - 3/0 1.100" .350" .120" 3" 50 CPO750-_-_
HSC300-600 2/0 - 350 MCM 1.500" .470" .160" 31⁄4" 50 CMP1000-_-_
HSC700-1000 250 - 600 MCM 2.000" .630" .160" 31⁄2" 50 1.000" (25.4) .500" (12.8) .035" (.9)
CPO1000-_-_
HSC300* 800 - 1250 MCM 3.500" 1.180" .160" 41⁄2" 20
Available in reels of 100' and 1000'. Available in other colors. Material: Cross-linked
HSC500* 1500 - 2500 MCM 4.700" 1.570" .170" 51⁄2" 10 Polyolefin. Temp. Range: 125°C. CMP U.L. Recognized File Number E137759 and
* Not U.L. Listed or CSA Certified CSA Certified. (Note clear material not U.L. Recognized). CPO Meets MIL-1-23053/5.
(No marking on tubing). When ordering standard package, order by package not feet.
Material: Thermally stabilized, modified polyolefin provided with mastic sealant on I.D. applied
Use feet and inches only when ordering special cut lengths.
approximately 1” deep. • 4' & 6" Lengths only available in CPO Style
?? ?
Having trouble finding THE PRODUCTS
223-05
Order by tag. WTAG-200 WTAG-201 WTAG-202 WTAG-203 WTAG-204 WTAG-205 WTAG-206 WTAG-207 WTAG-208 WTAG-209
?? ?
Having trouble finding THE PRODUCTS
224-05
?? ?
Having trouble finding THE PRODUCTS
225-05
Scotchkote™
Electrical
Coating
Heavy-Duty Vinyl An electrical grade, fast-drying sealant and
bonding compound in a brush-top can. Gives
Electrical Tape No. 22 extra protection to splices where moisture and
corrosive conditions could cause problems.
A thicker (10 mil) tape designed for An excellent sealant for underground wire
applications where greater mechanical splices.
strength and abrasion resistance are required.
For heavy-duty jobs such as bus bar Can Contents Carton Case
insulation, harnessing, cable jacket repair, 15 fl. oz. / 442 ml 10 10
sealing transformer and circuit breaker
connections, and moisture protection on No. 33+
flexible conduit. Meets requirements of UL Vinyl Electrical Tape
510, ASTM D-2301 Type II and CSA (22.2).
Roll Size Roll Carton Case Flame retardant, cold and weather resistant,
7 mils. For applications in extremes of heat
3/4 in. x 36 yd. 1/Box 12 48
and cold. 33+ is designed to perform in a
continuous temperature environment of
105°C (221°F).
226-05
Ordering information
Kit No. Contents Kits/Ctn
MWD-16 Detector; CGB-16 Common Block; 3. Identify the conductor at
3 Test Leads; 16 Calibrated Leads; the central control panel.
WI-116 1
19 Insulated Alligator Clips;
and Shock-Resistant Carrying Case.
www.manning-electric.com
Manning
Stocking Distributor for
3M Electrical Products
154 27 th Street — Brooklyn, NY 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
0227-05 4/27/05 2:18 PM Page 226
227-05
Connector Insulators 4 Insulating 2200, 2210 Vinyl Mastic Pads & Rolls
8420 Series Resin
A general-purpose,
two-part epoxy
insulating and
encapsulating resin,
packaged in Unipak Brand
Containers for exact mixing
A series of open-ended, tubular, prestretched EDPM ratios and convenience.
rubber sleeves which are factory assembled onto a Natural adhesive qualities and its compatibility with
removable, collapsible core. The core is removed
solid and synthetic cable insulations and sheaths make
when the tube has been positioned for installation,
Scotchcast 4 an excellent insulator and sealer for cable Self-fusing, rubber-based insulating compounds
such as over an in-line connection or terminal lug.
splicing. The mixed resin generates its own heat to laminated to a flexible, all-weather grade PVC backing.
No tools, torches or heat are required. The thick walls cure. No fire or outside heating process is needed. Both rolls and pads are resistant to abrasion, moisture,
resist puncture and damage. They resist acids, Outside contaminants and air cannot be stirred or alkalies, acid, copper corrosion, UV and varying
alkalies, ozone and ultraviolet light, and are not folded in during mixing. Because this resin is weather conditions. Temperature rating 176°F (80°C).
affected by moisture. These connector insulators seal
thermosetting, it will never melt or run once it cures; it Prod. Size Box
tightly, retain their resiliency and pressure after years
sets in about 30 minutes at 70°F. Can be used to
of aging and exposure and they are compatible with 2200 3.25 in. x 4.5 in. x 125 mils 10
all rubber and plastic cable insulation. They have a splice solid dielectric and oil-filled cables up to 8 KV
and to jacket high-voltage splices up to 69 KV. Flash Pads (83 x 114 mm)
90° C temperature rating and a 130°C emergency
overload capability. point: 300°F or over. 6.5 in. x 4.5 in. x 125 mils
(165 x 114 mm)
Use as primary electrical insulation for all solid Size Fl. Oz. Containers/Box
dielectric (rubber and plastic) insulated wire and cable 2210 4 in. x 10 ft. x 90 mils 1
A 3.2 1
splices rated up to 1000 volts; for physical protection Roll (102 mm x 3.05 m)
and moisture-sealing high-voltage connectors and B 7.4 1
lugs; for insulating secondary splices, copper or C 14.7 1
aluminum conductors; and for relocation of services,
dig-in and sheath repairs.
Relaxed PST Connector Insulators must overlap cable
insulation at least one inch for proper moisture seal.
?? ?
Having trouble finding THE PRODUCTS
228-05
Self-Stripping Connectors
Electric Cable T-Tap
Standard .250
Female T-Tap 22-18 951 X 50 500 2.2
Tab-Male
567 Tap Connectors splice all copper run wire 10 through 12 AWG and tap wire 14 through 18 AWG.
They feature a port window for visual wire positioning and are UL-rated for 600 volts and 105°C/220°F
maximum.
Wire Range AWG (Copper)
Number
Wire Range AWG (Copper) and Color Run Wire Tap Wire
Packing: Number
557, 558, 560 — 100 Connectors per box; 1,000 and Color Run Wire Tap Wire
Connectors per carton. 5,000 Connectors bulk 12 solid or 12 solid or
562
(500 per bag). 557 stranded; stranded;
Yellow
562, 567 — 100 Connectors per box; 1,000 Red 22, 20, 18 or 16 22, 20, 18 or 16 10 stranded 10 stranded
Connectors per carton; 1,000 Connectors, bin. 558 solid or stranded solid or stranded 564 18, 16 or 14 18, 16 or 14 solid
564 — 5,000 Connectors, bulk (500 per bag). Red White solid or stranded or stranded
These connectors are all UL-listed and 560 18 solid; or 16 or 18 solid; or 16 or 567 12 – 10 solid or 18, 16 or 14 solid
564, 560 and 567 are also CSA certified. Blue 14 solid or stranded 14 solid or stranded Brown stranded or stranded
?? ?
Having trouble finding THE PRODUCTS
229-05
?? ?
Having trouble finding THE PRODUCTS
230-05
Contact Cleaner
Resin/Compounds
Re-enterable Electrical Insulating and Sealing Compound
Permanently jelly-like 2114 is a urethane formulation. Adheres well, yet pulls away cleanly
for fast, simple splice re-entry.
Yellow when poured, 2114 cures transparent so bundles and connectors are easily located
during re-entry. Its Unipak Container allows fast mixing of pre-measured portions and is
poured directly from the container. No mess. Cure time is about 20 minutes at 23°C/73°F and
80 minutes at –7°C/20°F. Re-entry can be
made at temperatures down to –26°C/ –15°F. Product Net. Wt. Packing
No. Size Oz./Gr. Type of Pkg. Per. Ctn.
Possessing great thermal stability, moisture- 1 Bag/Box
resistant 2114 is non-corrosive to copper C 12.3/350
1 Bag/Can
and does not support fungi or mold. It 2114
1 Bag/Box
10
No. 2114 Splice Re-Entry Compound contains no TDI or MOCA and has no D 21.2/600
1 Bag/Can
volatile isocyonate problem.
231-05
MR.LONGARM, INC.
NON-CONDUCTIVE BULB CHANGERS
Model #3003
BULB CHANGER
Bulb Changer
COMBO KITS
For incandescent bulbs
up to 200 watts. Model #0976
12 pack Includes interchangeable
Weight: 3.25 lbs. cups for flood, spot and
incandescent light bulbs.
2-Section extension pole
reaches up to 11.25 ft.
Heavy duty external locking
Model #3002 device allows pole to be
(“R” Type) locked at the right height.
Spotlight Changer Model #0974
For recessed ceiling bulbs. Includes interchangeable
12 pack cups for flood, spot and
Weight: 3.00 lbs. incandescent light bulbs.
3-Section extension pole
reaches up to 16.5 ft.
Heavy duty external locking
device allows pole to be
Model #3001
locked at the right height.
(“PAR” Type) Floodlight
Changer
0974
For security and accent
lighting bulbs.
12 pack 6708 7474 7476 EXTENSION POLES
Weight: 3.50 lbs. ‡
Non-conductive all fiberglass construction, heavy duty external
locking device. Nylar threaded end accepts lock clip included with
bulb changer and fits other tools such as paint rollers, etc.
Item Description Reach* Size** Metric Size**
Model #4003
6708 Heavy-Duty, Smooth Construction 12.75' 4.25' - 7.75' 1.3m - 2.3m
Heavy Duty Bulb
6712 Heavy-Duty, Smooth Construction 16.5' 6.25' - 11.5' 1.9m - 3.5m
Changer 6716 Heavy-Duty, Smooth Construction 20' 8' - 15' 2.4m - 4.6m
For long life fluorescent 7474 3-Section, Ribbed Construction 16.5' 4.75' - 11.5' 1.4m - 3.5m
and incandescent bulbs. 7476 2-Section, Ribbed Construction 11.25' 3.5' - 6' 1.0m - 1.9m
12 pack * Reach based on an average height user of 5’5”. ** Sizes are approximate.
Weight: 4.75 lbs. ‡ Will not conduct electricity (120/140 voltage) if not contaminated with moisture, water or other
conductive liquids.
400 Walnut, P.O. Box 377, Greenwood, MO 64034-0377 USA See our ad in the
1-800-821-3508 • 816-537-6777 • Fax: 816-537-6162 Advertising Section
Visit our website at: www.mrlongarm.com for more
E-mail: info@mrlongarm.com Mr.LongArm products
0232-03 4/27/05 2:21 PM Page 232
232-05
OSRAM SYLVANIA
Filaments
A FILAMENT designation consists of a
prefix letter to indicate whether the wire is
straight or coiled, and a number to indicate
the arrangement of the filament on the
supports. Prefix letters include: C (coiled)
— wire is wound into a helical coil or it may
be deeply fluted; CC (coiled coil) — wire CC-6 C-7A C-8 CC-8 C-9 C-11 C-13 C-17 C-22
is wound into a helical coil and this coiled
wire again wound into a helical coil.
Bases
Typical screw base is shown. One lead-in
wire is soldered to the center contact and
the other soldered or welded to the upper
rim of the base shell. Base shells are Candelabra Double Contact Medium Medium 3 Kon-Tact Screw Comb. Screw Mogul Prefocus
Cand. Bayonet Skirted Med. Medium Terminal Terminals & Mog. Pf.
typically made of brass or aluminum.
(E12) Candelabra Med. Skt. (E26) 3 C Med. Scr. Term. Spade Connector
ANSI designations are in parentheses. D.C. Bay (BA15D) (E26/50X39) (E26D)
I/O PAR lamps are suitable for indoor and outdoor use Not recommended for horizontal burning CP Candlepower
Symbols E This lamp meets minimum federal efficiency standards Do not insert in household sockets 200
Rating given at 200MA operation
t
MA
Burn base down to horizontal H Heat-resistant hard glass Burn any position
t Burn base down Heat-resistant hard glass PAP Do not burn in paper-lined sockets
Bulb shapes and symbols legends appear on the first page of this section. Footnotes legend appears on the last page of this section.
Marine Lamps
AVAILABLE IN ALL MAJOR PORTS
FOR ORDERS & GENERAL INFORMATION CALL 1-800-255-5042 OR FAX 1-800-255-5043
Visit us on the web at www.sylvania.com
0233-03 4/27/05 2:22 PM Page 233
233-05
OSRAM SYLVANIA
Bulb shapes and symbols legends appear on the first page of this section. Footnotes legend appears on the last page of this section.
Marine Lamps
AVAILABLE IN ALL MAJOR PORTS
FOR ORDERS & GENERAL INFORMATION CALL 1-800-255-5042 OR FAX 1-800-255-5043
Visit us on the web at www.sylvania.com
0234-03 4/27/05 2:23 PM Page 1
234-05
OSRAM SYLVANIA
Bulb shapes and symbols legends appear on the first page of this section. Footnotes legend appears on the last page of this section.
Marine Lamps
AVAILABLE IN ALL MAJOR PORTS
FOR ORDERS & GENERAL INFORMATION CALL 1-800-255-5042 OR FAX 1-800-255-5043
Visit us on the web at www.sylvania.com
0235-03 4/27/05 2:24 PM Page 1
235-05
OSRAM SYLVANIA
Bulb shapes and symbols legends appear on the first page of this section. Footnotes legend appears on the last page of this section.
Marine Lamps
AVAILABLE IN ALL MAJOR PORTS
FOR ORDERS & GENERAL INFORMATION CALL 1-800-255-5042 OR FAX 1-800-255-5043
Visit us on the web at www.sylvania.com
0236-03 4/27/05 2:25 PM Page 1
236-05
OSRAM SYLVANIA
Bulb shapes and symbols legends appear on the first page of this section. Footnotes legend appears on the last page of this section.
Marine Lamps
AVAILABLE IN ALL MAJOR PORTS
FOR ORDERS & GENERAL INFORMATION CALL 1-800-255-5042 OR FAX 1-800-255-5043
Visit us on the web at www.sylvania.com
0237-03 4/27/05 2:26 PM Page 1
237-05
OSRAM SYLVANIA
Bulb shapes and symbols legends appear on the first page of this section. Footnotes legend appears on the last page of this section.
Marine Lamps
AVAILABLE IN ALL MAJOR PORTS
FOR ORDERS & GENERAL INFORMATION CALL 1-800-255-5042 OR FAX 1-800-255-5043
Visit us on the web at www.sylvania.com
0238-03 4/27/05 2:26 PM Page 1
238-05
OSRAM SYLVANIA
60 T-12 96ⴖ Single Pin 29824 F96T12/D41/SS (D741) 15 Designer 4100K SuperSaver ®®
12000 5600
29815 F96T12/CW/SS 15 Cool White8, 15 SuperSaver ® 12000 5300
29820 F96T12/LW/SS 15 Lite White8, 15 SuperSaver ® 12000 5600
29817 F96T12/WW/SS 15 Warm White8, 15 SuperSaver ® 12000 5500
70 T-12 84ⴖ Single Pin 28417 F84T12/CW 15 Cool White8 12000 5300
75 T-12 96ⴖ Single Pin 29807 F96T12/D41 (D741) 15 Designer® 4100K8 12000 6420
F96T12/D35/SS Is An Energy Saving Product
29478 F96T12/CWX 15 Deluxe Cool White8 12000 4400
F96T12/D35/SS Is An Energy Saving Product
29500 F96T12/DX 15 Daylight Deluxe 8 12000 4360
F96T12/D35/SS Is An Energy Saving Product
Bulb shapes and symbols legends appear on the first page of this section. Footnotes legend appears on the last page of this section.
Marine Lamps
AVAILABLE IN ALL MAJOR PORTS
FOR ORDERS & GENERAL INFORMATION CALL 1-800-255-5042 OR FAX 1-800-255-5043
Visit us on the web at www.sylvania.com
0239-03 4/27/05 2:33 PM Page 1
239-05
OSRAM SYLVANIA
M1000/U, M1000/C/U, operated vertically within 15°, may be operated in OPEN fixtures.
1000 BT-37 Mogul 64469 M1000/U/BT-37 M47ZC 6 Clear, Univ. 15000V 110000V 96000V 65 3800K
9000H 107800H 86300H
1000 BT-56 Mogul 64468 M1000/U M47GH 6 Clear, Univ. 18000V 110000V 86000V 65 4000K
Burn13 12000H 107800H 86300H
64470 M1000/C/U M47GH 6 Coated, Univ. 18000V 107000V 80000V 70 3400K
Burn13 12000H 101600H 80700H
1500 BT-56 Mogul 64431 M1500/BU-HOR M48GH 6 Clear, Base-Up 3000 170000V 140000V 70 4000K
to Horiz.10, 24, 25 153000H
64432 M1500/BD M48GH 6 Clear, Base Down 3000 155000H 140000 70 4000K
* In actual applications on a CWA ballast the mean lumens will be higher. within 15° Only4, 10 167000V
Bulb shapes and symbols legends appear on the first page of this section.
Footnotes
INCANDESCENT 25.A protective shield should be used external to the lamp. CF13DD:-4F; CF18DD: 5F; CF18DT:-4F; CF26: 14F
1.Indefinite long life. Designed for life in excess of 10,000 hours. In service life 26.In base up operation, heat may eventually deteriorate paper-lined or plastic sockets. 35.Minimum starting temperature is a function of the ballast, consult the ballast
depends upon burning conditions. 39.Package quantity may change. manufacturer. Some are rated for 0 F and others are 50 F.
2.Average laboratory life is 200 hours for vacuum cleaner and 600 hours for sewing 42.Incandescent lamps operated at less than rated voltage provide a lower light output, 37.2 pin CF lamps should never be installed in 4 pin sockets regardless if lamp will fit.
machine services. longer life, lower color temperature and are less efficient in terms of lumens per watt. High Intensity Discharge (HID)
4.For diesel electric locomotives without voltage regulators. FLUORESCENT 4.Lamps must be operated within 15° of vertical.
6.May not give satisfactory performance if any accessory lighting equipment touches 3.Ratings for Circline lamps are based on operation in Rapid Start circuits. They will 6.For use where glare is a problem.
the glass bulb. also operate on preheat circuits. 10.OPERATE IN ENCLOSED FIXTURES ONLY which comply with UL Standard 1572
9. For use only with heat-resisting connector and with bulb supported by bulb rim or 8.Average life rating at 12 hours burning per start is 18,000 hours. revised 12/88. Refer to fixture manufacturer data for compliance.
metal shell of base. 15.Recommended for use on one or two lamp high power factor, lead, instant-start, 13.May be operated in open fixture if operated within 15° of vertical.
10.Should not be used in equipment where base temperature will exceed 500°F. indoor ballasts that meet ANSI standards. Not intended for use: (1) at lamp ambient 14.Use with 5000V pulse rated sockets only.
12.Designed for service other than illumination. temperatures below 60°F or in drafty locations, (2) on low power factor ballasts, (3) 24.Published lumens for base-up position; lumens will be lower for all other positions,
14.Burn only in porcelain sockets. reduced current/reduced light output ballasts, (4) dimming ballasts, or (5) on inverter including horizontal.
15.Should be shielded against moisture falling on bulb. operated emergency lighting systems unless equipment is specifically listed for use 25.Lumens BU at 45°: Initial 150000; Mean 129000.
24.Operation of Lamp in any position other than base up may result in some loss of with 32 watt or 60 watt lamps.
protective coating. 34.Minimum starting temperature: CF5:-22F; CF7:-4F; CF9: 14F; CF13DS: 14F;
Marine Lamps
AVAILABLE IN ALL MAJOR PORTS
FOR ORDERS & GENERAL INFORMATION CALL 1-800-255-5042 OR FAX 1-800-255-5043
Visit us on the web at www.sylvania.com
0240-04 4/27/05 2:34 PM Page 242
240-05
Lens: waterproof, Case: one piece, waterproof, Ring Hanger: for convenient
unbreakable safety lens embossed with official storage off-floor, or for
certificate data attaching to belt, etc.
241-05
12 Volt Spotlights
NG-212 12V spotlight with 10 ft. cord
Diffuser Lenses
DR-8-NG Red diffuser lens for NG-200
Portable Power Packs
RBP-1270 7 Ampere hour battery pack with 110V charger for
MM-2 12V non-rechargeable spotlights
Swivel Mount
Three-way adjustable, weatherproof mounts. Magnetic base.
MM-2 Magnetic swivel/tilt mount
RBP-1270
242-05
PELICAN PRODUCTS
2660 HEADLAMP
• Unbreakable Polycarbonate or Xenoy® Resin Includes 1 halogen lamp, 3 LED’s, and a
• O-Ring Sealed • Corrosion Proof commercial extended duty battery hip pack
which uses 4 D-cell batteries (not included).
This LED light provides up to 50,000 hours of light with over Light weight, multi-angle pivoting head with
100 hours of battery life. Uses four LR 44 1.5V alkaline coin focusable light beam. Cloth strap and
cells. Water resistant and corrosion proof. INCLUDES: Pocket rubber strap included.
clip and neck lanyard. Lights available in black or yellow with a
#1930 L1 LED white, red or blue/green beam.
FLASHLIGHT
HEADLAMP (Batteries Included) FM
MSHA
(Batteries Included) Made of unbreakable space- #2600
age hi-impact resin. Pre-focused beam. Includes 2 lamps, 1 hi &1 low intensity.
Submersible up to 500 ft. INCLUDES: Laser spot Adjustable beam, Corrosion proof ABS Approved
lamp module, shirt clip, 2 AAA-cell alkaline batteries polymer. Forehead pad. Submersible.
and Litebender. COLORS: Black, Yellow, Orange, 4 AA-cell batteries included. COLOR: Black.
#1900 2AAA Cloth and rubber straps included.
Blue, White, Neon Green.
FLASHLIGHT Approved
Class I, Div. 2 Approved Watertight to 500 ft. Lexan® EXL 9330 body,
AUS
Laser Spot Xenon lamp. Requires 3 C-cell
batteries (not included). COLORS: Black,
#1990 3N Yellow, Orange.
HI INTENSITY LED FM
MSHA AUS
Water resistant, push button activation. 150 #2000C HEAVY DUTY Approved Class I
hours of battery life. 10,000 hours of LED life. FLASHLIGHT w/Battery safety tray
Div. 1
RECHARGEABLES RECHARGEABLE
• Available with 110V, or 220V SPOT LIGHT
or 12V plug-in transformers
• Wall Mount Smart Chargers
• Rubber Lens Protectors 3850AC110N
Rechargeable battery
powered spot light with
M9 20,000 Candlepower a beam and safety warning flashing beam. 610 lumen value. Water resistant.
Body made of unbreakable ABS plastic. Powered by a sealed lead acid or
M11 40,000 Candlepower rechargeable battery (included). One handed removal from charger base.
M13 90,000 Candlepower Backup lamp, strong nylon shoulder strap and metal lens guard included.
Base footprint same as Streamlight® Litebox® (same electrical and hole
per filament pattern). Charger base bracket attaches to vehicle floor or walls at any angle
M9 M11 for quick easy access to flashlight. COLORS: Black, Yellow. Approved
Class I, Div.1
243-05
Flashlight
#2400
LED
Submersible to 500 feet. Unbreakable Lexan EXL 9330 body with
®
Flashlight
polycarbonate lens. Laser spot Xenon lamp module with an unsurpassed
white collimated beam. Includes one-handed safety switch operation, double #2010
shock mounted battery compartment and lanyard. Batteries included on Advanced super bright 35MM Recoil LED Technology. 50+ hours battery burn
select packaging. COLORS: Black, Yellow, Orange, Lime Green. time. 32 lumen rating. Submersible. Brilliant, fog and smoke cutting, collimated
Class I, beam. Twist on/off activation. Requires 3 C-cell batteries (not included).
FM MSHA Div. 1 Approvals pending. COLORS: Black, Yellow.
AVAILABLE THROUGH:
WUENSCH SALES CO. (see page 1437)
PELICAN
You break it, we replace it... forever. HOUSTON: 713-921-6419 • 800-607-9543 • Fax: 877-921-3194
E-Mail: sales@wuenschsales.com • Web: www.wuenschsales.com
0239-04 4/27/05 2:38 PM Page 1
244-05
Model HL-X
Model XP87B
HL-X Headlite is UL & cUL listed for use in Class I, Division 1,
UL & cUL listed for Class I, Div. 1, Group C & D Group C & D hazardous locations. The light with its adjustable
Class II, Div. 1, Group F & G. strap easily mounts on a hardhat or can comfortably fit on a
• No exposed metal parts worker’s head as a hands-free safety light for confined space entry.
• Non-metallic guard and handle assembly of Zytel 801 ST • Lamp housing swivels 45° to aim light directly on the job
• Watertight • Operates approx. 4 hours
• Tempered glass globe • Weight 7.6 oz. (w/4 alkaline batteries)*
• 26 watt twin tube compact fluorescent lamp with starter • Chemically resistant case & lens
• 125 volt rated ballast designed to operate on 50 or 60 Hz with • Padded for user comfort
recyclable thermal protection
• 1800 lumens *Batteries not included with light
Dimensions: Length – 23-1/2”
Diameter – 4”
Weight – 3-1/2 lbs
Explosionproof Watertight
Portable Hand Lamp
Model XP162
Explosionproof UL & cUL listed for all Class I, Div. 1, Group C & D locations.
Flood Light Completely watertight. Can be used safely in any moisture
Model XP1530 condition. Can be equipped with a transformer for 12-volt
150 or 300 watt operation meeting OSHA Section 1926.401(J) (4). Tuffite handle
(specify when ordering.) and globe holder designed for chemical resistance, high impact
Stand included. strength and lightweight service. Guard of high impact aluminum
UL listed – Class I, alloy; non-sparking swivel hook. Light can be equipped to handle
Div. 1, Group C & D 16/3 or 14/3 cable. Accepts A-21, 100 watt rough service bulb.
Dimensions: Length – 12” One-piece socket construction can withstand up to 360° in service.
Height – 16” Dimensions: Length – 18-1/2”
Weight – 19 lbs. Diameter – 5”
Weight – 4 lbs.
245-05
ENERGIZER
INDUSTRIAL BATTERIES
EN92 EN91 EN93 EN95 EN22 1212 1215 1235 1250 1222
SIZE AAA SIZE AA SIZE C SIZE D 9-VOLT SIZE AAA SIZE AA SIZE C SIZE D 9-VOLT
www.manning-electric.com
Stocking Distributor for
Energizer
154 27th Street — Brooklyn, New York 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
0246-03 4/27/05 2:44 PM Page 246
246-05
ENERGIZER
COMPLETE LINE SPECIFICATIONS – BATTERY PRODUCTS
ALKALINE BATTERIES
STANDARD PKG. Chemical
Cat. No. Volt/Size UPC# Major Use
Quan. Wt. Cube System
E96BP-2 AAAA 03077-1 12 0.8 .07 Alkaline Multi-Purpose
E90 N 01448-1 24 0.5 .01 Alkaline Photoflash Multi-Purpose
522
E91 AA 01131-2 144 8.0 .09 Alkaline Multi-Purpose
L522 E95
E92 AAA 01399-6 48 1.2 .01 Alkaline Multi-Purpose
E93 C 01135-0 72 11.3 .11 Alkaline Multi-Purpose
E95 D 01138-1 72 23.3 .23 Alkaline Multi-Purpose
521 6 08962-5 4 17.7 .24 Alkaline Lantern
522 9 03158-7 72 7.8 .07 Alkaline Transistor Radio
528 6 09253-3 4 8.2 .10 Alkaline Electronic Appl.
529 6 07633-2 12 24.4 .34 Alkaline Lantern
L522 9 06664-0 48 .057 .02 Lithium Electronic / Medical
E93 E91 E92
EPX76
ENERGIZER
533 Maryville University Drive
St. Louis, MO 63141
TEL: (800) 426-8268 • FAX: (920) 969-2970
www.energizer.com
0247-03 4/27/05 2:44 PM Page 1
247-05
ENERGIZER
COMPLETE LINE SPECIFICATIONS – BATTERY PRODUCTS (Cont’d.)
ENERGIZER
533 Maryville University Drive
St. Louis, MO 63141
TEL: (800) 426-8268 • FAX: (920) 969-2970
www.energizer.com
0248-03 4/27/05 2:45 PM Page 1
248-05
ENERGIZER
COMPLETE LINE SPECIFICATIONS — BATTERY PRODUCTS (Cont’d.)
TELECOMMUNICATION BATTERIES
Cat. No. Volt/Size UPC# STANDARD PKG. Chemical
Major Use
Quan. Wt. Cube System
HS6570 4.5 02074-1 10 10.2 .15 Alkaline Communication
HS14196 45 09954-9 15 17.5 .29 Carbon Zinc Communication
HS14196
RECHARGEABLE BATTERIES
Cat. No. Volt/Size UPC# STANDARD PKG. Chemical
Quan. Wt. Cube System
NH15BP-2 AA 00868-8 6 .80 .04 NiMH
NH15BP-4 AA 01636-2 6 1.40 .04 NiMH
NH12BP-2 AAA 00866-4 6 .44 .03 NiMH
NH22NBP 7.2 00916-6 6 .70 .04 NiMH
NH35BP-2 C 01200-5 6 1.80 .07 NiMH
NH50BP-2 D 01203-6 6 2.00 .09 NiMH
CHM4AAWB Charger 00867-1 3 3.20 .25 NiMH
CHM24AAPP Charger 03522-6 12 13.80 .95 NiMH
CHM4FC CHM4FC Charger 01701-7 3 7.00 .34 NiMH
ENERGIZER
533 Maryville University Drive
St. Louis, MO 63141
TEL: (800) 426-8268 • FAX: (920) 969-2970
www.energizer.com
0249-05 4/27/05 2:45 PM Page 1
249-05
250-05
COLOR CODE
COVER/CASE
PART NO. PERFORMANCE LEVEL APPROXIMATE MAXIMUM OVERALL DIMENSIONS
VOLTS
QTS. WEIGHT (in inches and mm)
GROUP FOOT SUGG. OF
NO. NOTES WARR. REF. CA CCA RESERVE
WET DRY ACID
@ 32°F @ 0°F CAPACITY WET DRY L W H
12-VOLT MARINE/RV STARTING CALCIUM MAINTENANCE-FREE
24 24M7 — WW +HMU 24 1000 875 125 12 — 45 —
24M6 — BB +HMU 24 820 650 120 12 — 40 —
24M5 — BB +HMU 24 650 550 90 12 — 35 ⁄2
1
— 103⁄4 273 63⁄4 171 93⁄8 238
24M4 — BB +HMU 24 550 440 70 12 — 32 —
27 27M6 — BB +HU 24 925 750 182 12 — 56 — 12 1⁄2 318 63⁄4 171 93⁄8 238
HEAVY-DUTY COMMERCIAL SERVICE
4 904MFMM — BB L 30 1220 1000 270 6 — 47 — 121⁄2 318 67⁄8 175 91⁄2 241
No matt
er w
Starting hat your need
®
, s
or Dual Deep Cycle … Lyon Station, PA 19536-0147 • Fax: 610-682-4781
Purpose Order Dept Hotline: 610-682-4231
.
ISO 9001 www.dekabatteries.com
™ TS16949 E-mail: eastpenn@eastpenn-deka.com
0251-04 4/28/05 11:09 AM Page 251
251-05
FOOTNOTES: SYMBOL DEFINITIONS: IMPORTANT GEL AND AGM CHARGING INSTRUCTIONS: WARRANTY
G - Offset post w/horizontal hole, stainless steel + - Maintenance-free calcium grids VOID IF OPENED OR IMPROPERLY CHARGED. Do not install in a
5/16” bolt and hex nut • - Low maintenance – Low antimony grids sealed container. Constant under- or overcharging will damage any
H - Includes handles ★ - Hybrid construction battery and shorten its life! Use a good constant potential, voltage-
J - Includes lifting ledges regulated charger.
≈ - Nominal
K - Hard rubber, multi-cell cover construction ◗ - With individual vent caps For 12-volt gel batteries, charge to at least 13.8 volts but no more than
L - Anchor lock elements ▲ - Maintenance-free w/ vent caps, calcium grids 14.1 volts at 68°F (20°C). For 6-volt gel batteries, charge to at least 6.9
M - Flush manifold vented cover volts but no more than 7.05 volts at 68°F (20°C). The open circuit voltage
† - 12 months in deep cycle service of a fully charged 12-volt battery is 12.8V and a fully charged 6-volt
Q - Combination terminals, offset with 5/16" § - Deduct 15% from CCA and CA rating shown
stainless stud and wing nuts battery is 6.4V at 68°F (20°C). However, as the battery charges, the
to allow for double insulation (glass mat). building internal pressure (voltage) causes resistance to the charge.
R - Hard rubber, one-piece cover construction ~ - Deduct 4% from CCA and CA rating shown to Therefore, the on-charge voltage must be higher (at least 13.8V for
S - SAE “automotive type” post allow for double insulation (glass matt) 12-volt and 6.9V for 6-volt) to overcome this internal pressure (voltage)
T - Dual top terminals with SAE post and 3/8" POS., 1 - “Non-Spillable” defined by DOT (Department during charging.
5/16" NEG. Stainless steel studs and wing nuts. of Transportation) definition
For 12-volt AGM batteries, charge to at least 14.4 volts but no more than
U - Offset SAE post w/vertical 5/16" NEG., 3/8" POS. 2 - “Non-Spillable” defined by ICAO
(International Commercial Airline 14.6 volts at 68°F (20°C). The open circuit voltage of a fully charged
Stainless steel studs and wing nuts
Organization) and IATA (International Airline 12-volt AGM battery is 12.8V at 68°F (20°C). However, as the battery
V - Combination terminals, offset post with charges, the building internal pressure (voltage) causes resistance to the
horizontal hole, 5/16" bolt and hex nut Transport Association) definitions
charge. Therefore, the on-charge voltage must be higher (at least 14.2V)
X - 3/8" x 16 stainless steel stud posts Dry = up to 10% reduced capacity. to overcome this internal pressure (voltage) during charging.
Z - U1R terminals have round holes, All ratings conform to B.C.I. specifications.
U1L terminals have square holes
All AGM and gel ratings are after 15 cycles.
COLOR CODE: B - Black W - White All batteries manufactured in polypropylene cases
First letter indicates cover, second letter except where noted.
indicates case.
Sealed ®
® Batteries for ®
Deka seamate dominator
®
Virtually Any
Application!
www.dekabatteries.com
0252-03 4/28/05 11:11 AM Page 252
252-05
BUSSMANN
ONE TIME FUSES
Non-renewable
DIMENSIONS
250 Volt 600 Volt
Symbol & Length Dia. of Dia. Over Contact Blade Symbol & Length Dia. of Dia. Over Contact Blade
Amperes Overall Tube Ferrules Thickness Width Length Amperes Overall Tube Ferrules Thickness Width Length
NON 0 to 30 2” 1/2” 9/16” – – – NON 0 to 30 5” 3/4” 13/16” – – –
NON 35 to 60 3” 3/4” 13/16” – – – NON 35 to 60 5-1/2” 1” 1-1/16” – – –
NON 70 to 100 5-7/8” 1” – 1/8” 3/4” 1” NON 70 to 100 7-7/8” 1-1/4” – 1/8” 3/4” 1”
NON 110 to 200 7-1/8” 1-1/2” – 3/16” 1-1/8” 1-3/8” NON 110 to 200 9-5/8” 1-3/4” – 3/16” 1-1/8” 1-3/8”
NON 225 to 400 8-5/8” 2” – 1/4” 1-5/8” 1-7/8” NON 225 to 400 11-5/8” 2-1/2” – 1/4” 1-5/8” 1-7/8”
NON 450 TO 600 10-3/8” 2-1/2” – 1/4” 2” 2-1/4” NON 450 TO 600 13-3/8” 3” – 1/4” 2” 2-1/4”
Dia. Dia. Contact Blade Lbs. Dia. Dia. Contact Blade Lbs.
Length of Over Thick- per Length of Over Thick- per
Amperes Overall Tube Ferrules ness Width Length 100 Amperes Overall Tube Ferrules ness Width Length 100
1/10, 15/100, 2/10, 3/10, 4/10, 1/2, 1/10, 15/100, 2/10, 3/10, 4/10, 1/2,
6/10, 8/10, 1, 1-1/8, 1-1/4, 1-4/10, 6/10, 8/10, 1, 1-1/8, 1-1/4, 1-4/10,
1-6/10, 1-8/10, 2, 2-1/4, 2-1/2, 2-8/10, 2” 1/2” 9/16” – – – 5 1-6/10, 1-8/10, 2, 2-1/4, 2-1/2, 2-8/10, 5” 3/4” 13/16” – – – 16
3-2/10, 3-1/2, 4, 4-1/2, 5, 5-6/10, 3-2/10, 3-1/2, 4, 4-1/2, 5, 5-6/10,
6-1/4, 7, 8, 9, 10, 12, 15, 17-1/2, 6-1/4, 7, 8, 9, 10, 12, 15, 17-1/2,
20, 25, 30 20, 25, 30
35, 40, 45, 50, 60 3” 3/4” 13/16” – – – 12 35, 40, 45, 50, 60 5-1/2” 1” 1-1/16” – – – 26
70, 80, 90, 100 5-7/8” 1” – 1/8” 3/4” 1” 35 70, 80, 90, 100 7-7/8” 1-1/4” – 1/8” 3/4” 1” 56
110, 125, 150, 175, 200 7-1/8” 1-1/2” – 3/16” 1-1/8” 1-3/8” 88 110, 125, 150, 175, 200 9-5/8” 1-3/4” – 3/16” 1-1/8” 1-3/8” 125
225, 250, 300, 350, 400 8-5/8” 2” – 1/4” 1-5/8” 1-7/8” 182 225, 250, 300, 350, 400 11-5/8” 2-1/2” – 1/4” 1-5/8” 1-7/8” 305
450, 500, 600 10-3/8” 2-1/2” – 1/4” 2” 2-1/4” 304 450, 500, 600 13-3/8” 3” – 1/4” 2” 2-1/4” 480
Available through Electrical and Electronic Parts Distributors and Ship Chandlers in all U.S. and many Foreign Ports.
0253-03 4/28/05 11:16 AM Page 1
253-05
BUSSMANN
FAST-ACTING FUSES
200,000 Ampere Interrupting Rating
Listed by Underwriters Laboratories, Inc. as Class K1, Class L, and RK1 fuses
0-60 ampere
KWN-R and KWS-R
70-600 ampere
KWN-R and KWS-R
70 to 600 ampere The dimensions and standard ampere ratings of the KWN-R
KTN-R and KTS-R and KWS-R fuses are the same as those of the KTN-R and
KTS-R respectively, shown above.
FUSEHOLDERS
www.manning-electric.com
Stocking Distributor for
Bussmann
154 27 th Street — Brooklyn, NY 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
0254-03 4/28/05 11:20 AM Page 254
254-05
BUSSMANN
1/4 x 1 inch FUSES 1/4 X 1-1/4 inch FUSES
GLASS TUBE (Continued)
Formerly called 8AG. INDICATING
AGX fuses are listed by Underwriters’ Laboratories, Inc.
125 Volt sizes listed by Underwriters’ Laboratories, Inc.
Fibre tube, silver-plated indicating pin extends
from end of fuse when fuse is blown.
AGX 1/500 TO 1/32 amp. AGX 1/16 to 2 amp. GLD fuses in sizes larger than 5 amperes
MKB 1/16 and 1/8 amp. have a dual tube construction.
Provide high speed action necessary to protect
sensitive instruments or delicate apparatus.
GBA FUSES
GBA fuses are the same as GLD fuses
Voltage Symbol Amperes EXCEPT that the indicating pin is RED.
250 or less AGX 1/500, 1/200, 1/100, 1/32, 1/16,
Voltage Symbol Amperes
1/10, 1/8, 3/16, 2/10, 1/4, 3/8, 4/10,
125 or less GLD 3/4, 1, 1-1/2, 2, 3, 4, or 5
1/2, 3/4, 1, 1-1/2 or 2 32 or less GLD 6, 8, 10, 12, 15, 20, 25 or 30
250 or less MKB 1/16 or 1/8 IBM now called GLD.
MJB & MJW fuses now called AGX. GBA fuses have same electrical and physical characteristics as BUSS GLD fuses
125 volt sizes listed by Underwriters’ Laboratories, Inc. and are made in the same ampere sizes up to 5 ampere. These sizes are listed by
Voltage Symbol Amperes the Underwriters’ Laboratories, Inc.
125 or less AGX 3, 4, or 5
To specify: give symbol GBA and amperes.
32 or less AGX 8, 10, 15, 20, 25 or 30
AGX fuses also available under MIL-F 15160/1 DUAL-ELEMENT GLASS TUBE – SLOW BLOWING FUSES
Available through Electrical and Electronic Parts Distributors and Ship Chandlers in all U.S. and many Foreign Ports.
0255-03 4/28/05 11:21 AM Page 1
255-05
BUSSMANN
13/32 x 1-1/2 inch FUSES 13/32 x 1-1/2 inch FUSES
(Continued) (Continued)
VISUAL INDICATING TYPE – FIBRE TUBE
0 to 15 ampere sizes listed by Underwriters’ Laboratories, Inc.
Red button on indicating pin
extends from end of fuse Voltage Symbol Amperes
when fuse is blown. Made in 250 or less FNA 1/10, 15/100, 2/10, 3/10, 4/10, 1/2,
accordance with Navy
Specifications. 6/10 or 8/10
125 or less FNA 1, 1-1/8, 1-1/4, 1-4/10, 1-6/10, 1-8/10,
Voltage Symbol Amperes 2, 2-1/4, 2-1/2, 2-8/10, 3, 3-2/10, 3-
250 or less MIN 1, 2, 3, 5, 10 or 15 1/2, 4, 4-1/2, 5, 5-6/10, 6, 6-1/4, 7, 8,
125 or less MIN 20, 25 or 30 10, 12 or 15
32 or less FNA 20, 25, or 30
FAST-ACTING HIGH
INTERRUPTING CAPACITY
13/32 x 1-3/8 inch FUSES
BBS FUSES
600 VOLT
Fibre tube. Designed for the protection of control circuits, gaseous vapor
Type KTK fuses are for protection of control circuits, gaseous vapor fixture fixture circuits, or wherever a fuse with “quick-blowing” characteristics is
circuits or any circuit having fault current capacity up to 100,000 amperes, desirable. Listed by the Underwriters’ Laboratories, Inc.
AC only. Listed by Underwriters’ Laboratories Inc.
0 to 15 ampere sizes listed by Canadian Standards Assn. Voltage Symbol Amperes
Voltage Symbol Amperes 600 or less BBS 4/10, 3/4, 8/10, 1, 2, 3, 4 or 5
600 or less KTK 1/10, 1/8, 2/10, 1/4, 3/10, 1/2,
3/4, 1, 1-1/2, 2, 3, 4, 5, 6, 8, 10,
15, 20, 25 or 30. WATERPROOF FUSEHOLDER
Type KLM is the military version of Type KTK fuses, made in conformity and
tested to meet the requirements of Specification MIL-F-15160-D. They have
an interrupting rating on voltages of 500 of 100,000 amperes AC or DC.
Available in same ampere ratings as Type KTK fuses. In-the-Line Waterproof fuseholders
DUAL-ELEMENT FIBRE
Fuseholder Crimp Type AWG COPPER Wire Size
TUBE – SLOW BLOWING Symbol Terminals Symbol Terminal will take
They have a fuse link which operates One #14, 12, 10 or 8 solid or stranded
only on very high overloads or short- A wire
circuits – they have a thermal cutout HEB Two #14 or 12 solid or stranded wires
which functions on low overloads – Takes 13/32 x
One #6 or 4 solid wire
the thermal cutout cannot operate 1-1/2 inch fuse -
at rated voltage B One #6 stranded wire
125 and 250 volt sizes listed by quickly at any load, hence long time- of fuse - up to Two #10 solid or stranded wires
Underwriters’ Laboratories, Inc. lag is obtained. 600 volts. C Two #8 solid or stranded wires
Voltage Symbol Amperes (KTK, FNM, One #4 stranded wire
BAF, etc., fuses) D Two #6 solid or stranded wires
250 or less FNM 1/10, 15/100, 2/10, 3/10, 4/10, 1/2,
One #2 stranded wire
6/10, 8/10, 1, 1-1/8, 1-1/4, 1-4/10,
E Two #4 solid or stranded wires
1-6/10, 1-8/10, 2, 2-1/4, 2-1/2, 2-8/10, Set Screw Type Copper For Copper
3-2/10, 3-1/2, 4, 4-1/2, 5, 5-6/10, 6-1/4, Connector Terminal Symbol Wire or Cable
7, 8, 9 or 10 HEJ J One #12 to #2 solid or stranded wire
125 or less FNM 12 or 15 Takes 13/32 x K Two #12 to#2 solid or stranded wire
32 or less FNM 20, 25 or 30 2-1/4 inch fuse - Set Screw Type Aluminum For Aluminum
at rated voltage of Connector Terminal Symbol Wire or Cable
FNM fuses also available under MIL-F 15160/9 fuse - up to L One #12 to #2 solid or stranded wire
1200 volts.
(SC35 to SC60 Y Two #12 to #2 solid or stranded wires
SIGNAL OR VISUAL INDICATING TYPE W Solid copper terminal for breakaway
HVW1/2 to
FNA are FNM FUSETRON dual- HVW6, etc., fuse) receptacle
element fuses with silver-plated Fuseholders can readily be adapted to take aluminum wire or cable.
indicating pin which extends from
fuse when fuse is blown.
Fuses in sizes larger than 10 ampere
have a dual tube construction.
www.manning-electric.com
Stocking Distributor for
Bussmann
154 27 th Street — Brooklyn, NY 11232 Tel: (718) 832-2488 Fax: (718) 832-2493
0244-04 4/28/05 11:22 AM Page 1
256-05
CARBON BRUSHES
Grade General Service Applications Grade General Service Applications
SA-35 For large and medium size D.C. commutating machines 255 A general purpose brush suitable for machines having
having high surface speeds and where loads are heavy. moderate loads and speeds and normal commutating
SA-3538 Applicable to D.C. commutating machines where load conditions.
conditions are fairly light. AY A graphitic grade for bronze slip rings where the current
SA-45 For D.C. commutating machines where heavy loads density does not exceed 75 amps per sq. in.
and general operating conditions require a brush having AYK Contains approximately 35% copper and is
the highest commutating ability. recommended for bronze slip ring applications where
the current density does not exceed 90 amps per sq. in.
TERMINALS
SL 1 SL 2 SL 20 SL 21 SL 34 SL 38
Type O Type S
Type S Type O Flag Flag
SL 39 SL 46 SL 53 SL 71 SL 85 SL 86
SL 92 SL 96 SL 97 SL 98 SL 99 SL 100
SHUNT LENGTHS
*Angular A. Cable fixed to Clip. Clip riveted to brush. **Cables fixed to metal plates. Plates riveted to brush.
?? ?
Having trouble finding THE PRODUCTS
257-05
COMMUTATOR RESURFACERS
Pocket-Type Small Motor-Type Precision Grinder
Resurfacer 80-112 Resurfacer 80-012
Straight-Handle Flexible
Resurfacer 80-184 Abrasive
82-004
Size in Inches Grades Catalog No.
3/4 x 3/4 x 3 X,C,M,F,P 80 - 504*
1 x 1-1/2 x 6-1/2 80 - 454* Size in Inches Catalog No.
Size in Inches Grades Catalog No. 1x2x8 80 - 461* 3/8 x 1/2 x 5 82 - 001
1x1x1 X,C,M,F,P 80 - 155* 1-1/2 x 2-1/2 x 8 80 - 468* 3/8 x 3/4 x 5 82 - 002
1x1x2 80 - 165* 2x2x8 80 - 475* 5/8 x 1 x 5 82 - 003
2x1x1 80 - 174* 1 x 1-1/2 x 11 80 - 482* 1x2x5 82 - 004
2x1x2 80 - 184* 1-1/2 x 2-1/2 x 11 80 - 489* 1x4x5 82 - 005
3x1x2 80 - 193* 2 x 2 x 11 80 - 496* 1/8 x 1 x 5 82 - 006
* Add grade letter suffix to Cat. No. * Add grade letter suffix to Cat. No.
258-05
RELAYS
Auxiliary relays, with 3 NO and 2 NC contacts
Cat.No. Volts Hz Type
443712 110 50/60 CAD-32F7
443716 230 50/60 CAD-32P7
CONTACTORS 443720 400 50/60 CAD-32V7
3-pole, with 1 NO and 1 NC auxiliary contact 443724 440 50/60 CAD-32R7
9A (AC3) Cat.No. Volts Hz Type Auxiliary relays, with 5 NO contacts
443102 110 50/60 LC1-D09F7 Cat.No. Volts Hz Type
443106 230 50/60 LC1-D09P7 443832 110 50/60 CAD-50F7
443110 400 50/60 LC1-D09V7 443836 230 50/60 CAD-50P7
443114 440 50/60 LC1-D09R7 443840 400 50/60 CAD-50V7
443844 440 50/60 CAD-50R7
12A (AC3) Cat.No. Volts Hz Type Coils for contactors LC1 D09/38 and auxiliary relays CAD
443212 110 50/60 LC1-D12F7 Cat.No. Volts Hz Type
443216 230 50/60 LC1-D12P7 444009 24 50/60 LXD-1B7
443220 400 50/60 LC1-D12V7 444014 110 50/60 LXD-1F7
443224 440 50/60 LC1-D12R7 444018 230 50/60 LXD-1P7
444022 400 50/60 LXD-1V7
18A (AC3) Cat.No. Volts Hz Type 444026 440 50/60 LXD1-R7
443272 110 50/60 LC1-D18F7 Coils for contactors LC1 D40/95
443276 230 50/60 LC1-D18P7 444134 110 50/60 LX1-D6F7
443280 400 50/60 LC1-D18V7 444138 230 50/60 LX1-D6P7
443284 440 50/60 LC1-D18R7 444142 400 50/60 LX1-D6V7
444146 440 50/60 LX1-D6R7
25A (AC3) Cat.No. Volts Hz Type Thermal overload relays for contactors LC1 D09 to LC1 D38
443322 110 50/60 LC1-D25F7 Cat.No. Current setting range Type
443330 230 50/60 LC1-D25P7 444304 0,63-1 A LRD-05
443334 400 50/60 LC1-D25V7 444305 1-1,7 A LRD-06
443338 440 50/60 LC1-D25R7 444314 1,6-2,5 A LRD-07
444318 2,5-4 A LRD-08
32A (AC3) Cat.No. Volts Hz Type 444322 4-6 A LRD-10
443386 110 50/60 LC1-D32F7 444326 5,5-8 A LRD-12
443390 230 50/60 LC1-D32P7 444330 7-10 A LRD-14
443394 400 50/60 LC1-D32V7
443398 440 50/60 LC1-D32R7
THERMAL OVERLOAD RELAYS for contactors
Cat.No. Setting range Type For contactor
40A (AC3) Cat.No. Volts Hz Type
444334 9-13 A LRD-16 LC-1D12/38
443446 110 50/60 LC1-D40F7 444338 12-18 A LRD-21 LC-1D18/38
443450 230 50/60 LC1-D40P7 444344 16-24 A LRD-22 LC-1D25/38
443454 400 50/60 LC1-D40V7 444348 23-32 A LRD-32 LC-1D25/38
443458 440 50/60 LC1-D40R7 444396 23-32 A LRD-3353 LC-1D40/95
444400 30-40 A LRD-3355 LC-1D40/95
50A (AC3) Cat.No. Volts Hz Type 444404 37-50 A LRD-3357 LC-1D50/95
443506 110 50/60 LC1-D50F7 444408 48-65 A LRD-3359 LC-1D50/95
443510 230 50/60 LC1-D50P7 444412 55-70 A LRD-3361 LC-1D50/95
443514 400 50/60 LC1-D50V7 444415 63-80 A LRD-3363 LC-1D80/95
443518 440 50/60 LC1-D50R7 444418 80-104 A LRD-3365 LC-1D80/95
SUPPORT for separate mounting of thermal relays
65A (AC3) Cat.No. Volts Hz Type Cat No. Description
443568 110 50/60 LC1-D65F7 444507 Type LAD-7B10 for thermal relay LRD-01…35
443570 230 50/60 LC1-D65P7 and LR3-D01…D35
443574 400 50/60 LC1-D65V7 AUXILIARY CONTACT BLOCKS for contactors LC-1.. and auxiliary
443578 440 50/60 LC1-D65R7 relays CAD32..
Cat.No. Composition Type
80A (AC3) Cat.No. Volts Hz Type 444572 1 NO LAD-N10
443580 110 50/60 LC1-D80F7 444576 1 NO LAD-N01
443585 230 50/60 LC1-D80P7 444580 1 NO and 1NC LAD-N11
443587 400 50/60 LC1-D80V7 444584 2 NO and 2NC LAD-N22
443590 440 50/60 LC1-D80R7 444588 4 NO LAD-N40
444592 4 NC LAD-N04
95A (AC3) Cat.No. Volts Hz Type TIME DELAY CONTACT BLOCKS with 1 NO and 1 NC contact for contactors
443599 110 50/60 LC1-D95F7 LC1…and auxiliary relays CAD…
443602 230 50/60 LC1-D95P7 Cat.No. Description
443604 400 50/60 LC1-D95V7 444651 0,1 to 30 s on energisation type LADT-2
443608 440 50/60 LC1-D95R7 444657 10 to 180 s on energisation type LADT-4
444663 0,1 to 30 s on de-energisation type LADR-2
444669 10 to 180 s on de-energisation type LADR-4
Kerger Marine Electric, Inc. Head Office: Kerger & Co. B.V.
4350 South Wayside Drive, Suite 104 We stock a complete line of Telemecanique TeSys® Fokkerstraat 515
Houston, TX 77087 contactors and relays 3125 BD Schiedam
Phone: (713) 643-3326 The Netherlands
Fax: (713) 643-6683 Visit our Website for more information: www.kerger.com Phone: 31-104374500
(800) 328-3670 Fax: 31-104376825
E-mail: saleshouston@kerger.com ALL MAIN EUROPEAN PARTS AVAILABLE IN SHORT TIME E-mail: sales@kerger.nl
0257-03 4/28/05 11:27 AM Page 1
259-05
Protection Resistance to
Protection
against solid impacts of a
against vertical
1 bodies of 1 falling of water 1 weight of 150 g.
dimensions falling from
drops
above 50 mm 15 cm
Protection
Protection Resistance to
against falling
against solid impacts of a
of water drops
2 bodies of 2 with a 15° 2 weight of 150 g.
dimensions falling from
maximum
above 12 mm 25 cm
inclination
Protection Resistance to
against solid impacts of a
Protection
3 bodies of 3 against rain 3 weight of 250 g.
dimensions falling from
above 2.5 mm 20 cm
Protection Resistance to
Protection
against solid impacts of a
against
4 bodies of 4 sprinklings 5 weight of 500 g.
dimensions falling from
of water
above 1 mm 40 cm
Resistance to
Protection impacts of a
Protection
5 against dust 5 against jets 7 weight of 1.5 kg.
of water falling from
40 cm
Resistance to
Complete
impacts of a
protection Protection
6 against dust 6 against waves 9 weight of 5 kg.
falling from
(dustproof)
40 cm
Protection
against
immersion under
7 predetermined
pressure and
time conditions
Protection against
immersion under
predetermined
8 pressure
conditions
for unlimited time
1st number characteristics defined by the CEI 70-1, 2nd number characteristics defined by the CEI 70-1, 3rd number characteristics defined by the
IEC 529, IEC 144, UTE C 20-010, DIN 40050 standards. IEC 529, IEC 144, UTE C 20-010, DIN 40050 standards UTE C 20-010 French standards
260-05
261-05
262-05
No. 115
No. 406 No. 162
No. 162
10 Amp.
250 Volt No. 421 No. 422
263-05
Brass casing
2005/R/MC MC-socket insert of steatite
With mechanical blocking system
E 27
MA103 (Med. Edison Screw) External Porcelain
(JIS #F8833)
B 22 10 Amp.
MA104 (Standard Bayonet) External Porcelain
250 Volt
E 40
MA105 (Mogul Base) External Porcelain
265-05
267-05
268-05
BRITISH HRC-FUSES
HRC-Fuse Links with offset tags HRC-Fuse Links with opposite tags
HRC-Fuse Links HRC-Fuse Links with
with offset tags Rated Equi- opposite tags
Ref. L-Nr.
Current A valents
Category of duty: Category of duty:
2
415 tested 550 AC 80 415 AC 80
4
Class: Q 1
Class: Q 1 6
A1 50 085 01 NIT
10 Rated
Ref. L-Nr. Equivalents
16 Current A
20 2
2 4
4 6 50 086 01 NS 51 014 01
6 b d 10
10 50 014 01 12,7 60 16
A2 50 001 01 TIA
16 50 086 01 1/2” 2-3/8” 20
20
25 HRC-Fuse Links with central tags
32
HRC-Fuse Links with
32
40
central tags
A3
50
50 002 01 TIS 2-hole fixing
63 Category of duty:
80 415 tested 550 AC 80
A4 50 003 01 TCP
100 Class of fusing factor: Q 1
125
Rated
160 50 004 01 TFP Ref. L-Nr. Equiv.
Current A
200
2
4
b g h k e 6
50 012 01 13,5 44 5 14 11 10
50 085 01 17/32” 1-3/4” 3/16” 9/16” 7/16” 16
22 23,8 8,7 B1 20 50 007 01 TBC
50 001 01
7/8” 73 5,5 15/46” 11/32” 25
25 2-7/8” 7/32” 26,5 12 32
50 002 01
1” 1-1/16” 15/32” 40
36 8,7 38 b e 50
50 003 01 L-Nr. Ref.
1-13/32” 94 11/32” 1-1/2” 18 mm in mm in 63
41 3-11/16” 7,2 43 23/32” 50 007 01 B1 25 1 14 9/16 80
50 004 01 B1 50 008 01 TC
1-5/8” 9/32” 1-11/16” 50 008 01 B1 37 1-15/32 18 3/4 100
269-05
SM/DANLAMP AS
* (NK: Nordisk kontrol) which means that the lamps are approved in Scandinavia
(1) Minimum horizontal luminous intensity for rated voltage.
Fig. 2 (2) Production
control on all types of SM navigation lamps performed by
Danish Government Ships Inspection Service (DGSIS).
270-05
SM/DANLAMP AS
EUROPEAN LOW VOLTAGE BULBS
6 VOLT 12 VOLT
Conical Bulb, clear, 35 mm dia. Tubular Bulb, clear, 25 mm dia.
EUROPEAN Base
Watt Base
ROUGH SERVICE E 27 B 22 E 14 B 15 Watt
E 27 B 22 E 14 B 15
15 60 — 62 60
BULBS 25 60 — 62 —
25 — — 85 —
271-05
SM/DANLAMP AS
EUROPEAN INDICATOR LAMPS TUNGSTEN HALOGEN LAMPS
Type: TKL Type: KRL
Dimension: Dimension:
7 x 25 mm 10 x 28 mm
T2 T 3-1/4
Standard-Type Dimensions (mm)
Type Voltage Watts Base
Length Diameter
K1 118 12 110/120 500 R7s
K1 118 12 220/230 500 R7s
Volt A = Ampere, W = Watt K3 189 12 220/230 750 R7s
Volt Ampere K4 189 12 110/120 1000 R7s
4 A 0,05; 0,25; 0,3; 0,4
6 0,1 K4 189 12 220/230 1000 R7s
A 0,02; 0,03
12 0,05
6 A 0,05; 0,08; 0,1; 0,18 K5 254 12 220/230 1500 R7s
24 0,025
28 0,04
W 1; 1,2; 1,5; 2; 3; 4; 5 K6 324 12 220/230 2000 Fa4s
A 0,02 ; 0,03
30 0,03
12 A 0,05; 0,08; 0,1; 0,12
36 0,05
W 1; 1,2; 1,5; 2; 3; 4; 5
42 0,04
A 0,02 ; 0,03
48 0,025
24 A 0,04; 0,05; 0,08; 0,1; 0,2
60 0,02; 0,025
W 1; 1,2; 1,5; 2; 3; 4; 5
0,04 Dimensions (mm)
A 0,02; 0,03 Type Voltage Watts Base
70 0,02 Length Diameter
28 A 0,04; 0,08; 0,1; 0,17
0,04 IODE 95 15.5 220/230 250 E-27
W 1; 1,2; 1,5; 2; 3; 4; 5
80 0,02 IODE 240 30 220/230 500 E-40
A 0,02; 0,03
30 A 0,04; 0,05; 0,08 IODE 260 30 220/230 1000 E-40
W 1,2; 1,5; 2; 3; 4; 5
A 0,02; 0,03
36 A 0,04; 0,05 EUROPEAN HIGH-PRESSURE SODIUM LAMP
W 1,5; 2; 3; 4; 5
Type: RL A 0,02; 0,03 (Clear, Ignitor Required)
Dimension: 42 A 0,04; 0,05
16 x 50 mm W 1,5; 2; 3; 4; 5
T5 A 0,02 NAV TYPE
48 A 0,03; 0,04; 0,05
W 1,5; 2; 3; 4; 5
A 0,02 – W 1,2
60 A 0,03; 0,04; 0,05 Luminous Diameter Overall
W 2; 3; 4; 5 Type Flux (Im) (mm) Length (mm) Base
Volt A = Ampere, W = Watt A 0,02 NAV-T400W 48000 46 285 E40
A 70
0,05; 0,08; 0,2 A 0,04
12 W 2; 3; 4; 5; 7 A 0,02
80
W 10; 15 A 0,04
A 0,05; 0,08; 0,2 110/
EUROPEAN HIGH-PRESSURE MERCURY LAMPS
130 A 0,02
24 W 2; 3; 4; 5; 7; 10
W 15
A 0.08 NEON LAMPS Volt
Max.
mA
30 W 2; 3; 4; 5; 7; 10 (Self Ballast)
W 15 Type: SGL 110 2,0
36 W 3; 4; 5; 7; 10 Dimension: 220* 3,5 HWL TYPE
W 15 16 x 54 mm 380* 2,0
48 W 3; 4; 5; 7; 10 *10000 h
W 15
60 W 3; 4; 5; 7; 10 Lamp Bulb Bulb Overall Luminous
Type
W 15 (W) Base Dia. Length Flux (Im)
70 W 5; 7; 10 160W 225V 160 E-27 75 mm 177 mm 3,100
80 W 5; 7; 10 250W 225V 250 E-40 90 mm 226 mm 5,600
500W 225V 500 E-40 120 mm 275 mm 14,000
EUROPEAN CURRENT
INDICATOR LAMPS
Amp Range
1 VOLT (External Ballast)
0,06 – 0,10 Diameter: 28 mm Type: ZGL
HQL TYPE
0,09 – 0,15 Length: 58 mm Dimension:
0,13 – 0,22
0,18 – 0,31
10 x 28 mm
Lamp Bulb Bulb Overall Luminous
0,28 – 0,45 Type
(W) Base Dia. Length Flux (Im)
0,40 – 0,65 Max.
Volt 125W 125 E-27 75 mm 170 mm 6,300
0,58 – 0,95 mA
0,85 – 1,40 220* 2,0 250W 250 E-40 90 mm 226 mm 13,500
1,25 – 2,00 380* 0,8 400W 400 E-40 120 mm 290 mm 23,000
1,80 – 3,00 B 22 E 27 *10000 h 700W 700 E-40 140 mm 330 mm 40,000
272-05
Fig. 1 Fig. 2
(Specify when ordering: Type: T4.6, T5.5K or T5.5 • Voltage: 6v, 12v, 24v, 30v, 48v or 60v • Amps: 20mA, 40mA, or 50mA)
273-05
E10
Wide Beam Floodlight—
Cool with Dichronic Reflector
The dichronic reflector allows 75% of the heat to pass
through the back of the lamp without loss of light.
Wide Beam Flood—FL-C
Sealed beam PAR 38, internal reflector, coarsely granulated
Angle of Dimensions Built in
Power
Emission Diam. Length Length Base Voltage BA 20s E 14
W B 22
(approx.) mm mm mm
150 40° 122 133 123 E27 220/230
Floodlight/Spotlight Par 56
The light beams are not club-shaped (circular cross-
section, rotation-symmetrical) but fan-shaped (elliptical
cross-section). The two beam angles shown refer to
the two planes in a perpendicular position to each
other with the largest and the smallest beam angle.
Sealed beam with cap GX16d (flat pins).
Narrow Spotlight—NSP E 27
Medium Floodlight—MFL, Wide Floodlight—WFL
Angle of Dimensions Built in
Power
Emission Diam. Length Length Base Voltage E 40
W
(approx.) mm mm mm
300 9°/15° 179 127 83 GX16d 220/230
300 11°/25° 179 127 83 GX16d 220/230
300 16°/40° 179 127 83 GX16d 220/230 Japanese Reflector
Outdoor Flood (Flat)
Infrared Lamps Light Bulbs
Dimensions
Power Execution Life Dimensions (mm)
d (max) l (max) Base Model No. Socket
W Top (hours)
mm mm Diam. Length
150 Red 125 185 5000 E27 RF 200 WH E-26 130 154
250 Clear 125 185 5000 E27 RF 300 WH E-39 140 220
250 Red 125 185 5000 E27 RF 500 WH E-39 180 250
274-05
275-05
Medium Edison Screw Base E27 Small Edison Screw Base E14
Catalog No. Volts Watts Dimen. (mm)* Catalog No. Volts Watts Dimen. (mm)*
2821 110 15 26 x 62 2813 110 15 26 x 62
2817 110 15 26 x 80 2809 110 15 26 x 80
2823 110 25 26 x 62 2815 110 25 26 x 62
2819 110 25 26 x 80 2811 110 25 26 x 80
2871 110 40 27 x 70 2814 220 15 26 x 62
2822 220 15 26 x 62 2810 220 15 26 x 80
2818 220 15 26 x 80 2816 220 25 26 x 62
2824 220 25 26 x 62 2812 220 25 26 x 80
2820 220 25 26 x 80 2872E 220 40 25 x 68
2872 220 40 27 x 70 *Dimensions are approximate and may vary slightly
*Dimensions are approximate and may vary slightly
Double Contact Bayonet Base B22 Small Double Contact Bayonet Base B15
Catalog No. Volts Watts Dimen. (mm)* Catalog No. Volts Watts Dimen. (mm)*
2805 110 15 26 x 62 2829 110 15 26 x 62
2801 110 15 26 x 80 2825 110 15 26 x 80
2807 110 25 26 x 62 2831 110 25 26 x 62
2803 110 25 26 x 80 2827 110 25 26 x 80
2873 110 40 27 x 70 2873B 110 40 26 x 70
2806 220 15 26 x 62 2830 220 15 26 x 62
2802 220 15 26 x 80 2826 220 15 26 x 80
2808 220 25 26 x 62 2832 220 25 26 x 62
2804 220 25 26 x 80 2828 220 25 26 x 80
2874 220 40 27 x 70 2874B 220 40 25 x 70
*Dimensions are approximate and may vary slightly *Dimensions are approximate and may vary slightly
NAVIGATION LAMPS
Medium Edison Screw Base E27 Double Contact Bayonet Base B22
Catalog No. Volts Cd Catalog No. Volts Cd
2867 110 26 2869 110 26
2867A 110 65 2869A 110 65
2868 220 26 2870 220 26
2868A 220 65 2870B 220 50
2870A 220 65
276-05
Kerger Marine Electric, Inc. Head Office: Kerger & Co. B.V.
4350 South Wayside Drive, Suite 104 We stock a complete line of European & Japanese Fokkerstraat 515
Houston, TX 77087 marine electrical spare parts 3125 BD Schiedam
Phone: (713) 643-3326 The Netherlands
Fax: (713) 643-6683 Visit our Website for more information: www.kerger.com Phone: 31-104374500
(800) 328-3670 Fax: 31-104376825
E-mail: saleshouston@kerger.com ALL MAIN EUROPEAN PARTS AVAILABLE IN SHORT TIME E-mail: sales@kerger.nl
0275-03 4/28/05 1:10 PM Page 275
277-05
Fig. 4 5 108680 SPS-10A for Japanese “Aldis”, 24V, 60W, GX6,35 base, 18mm dia. x 42mm high
Fig. 2 Fig. 5
Kerger Marine Electric, Inc. Head Office: Kerger & Co. B.V.
4350 South Wayside Drive, Suite 104 We stock a complete line of European & Japanese Fokkerstraat 515
Houston, TX 77087 marine electrical spare parts 3125 BD Schiedam
Phone: (713) 643-3326 The Netherlands
Fax: (713) 643-6683 Visit our Website for more information: www.kerger.com Phone: 31-104374500
(800) 328-3670 Fax: 31-104376825
E-mail: saleshouston@kerger.com SOLE AGENTS FOR “MERKUR” NAVIGATION LAMPS E-mail: sales@kerger.nl
278-05
Outside Dia.
Catalog No. Overall Height Type of Glass
of Ring
22144 116 mm 100 mm Clear
22157 116 mm 100 mm PVC
22144 22170 22170 122 mm 100 mm Opal
22157
Catalog A B
No. Overall Height Dia. Across Lip
22560 22560 5-1/2" (140 mm) 3-7/8" (98 mm)
22287
22287 6-1/2" (165 mm) 3-1/2" (89 mm)
22209
22209 4-1/2" (115 mm) 3-11/16" (94 mm)
22180
03183 22180 6-5/16" (160 mm) 5-1/8" (130 mm)
22183 5-3/4" (145 mm) 5-15/16" (150 mm)
03183 1-1/2" (38 mm) 7-7/8" (200 mm)
22612 4-7/8" (123 mm) 6-7/8" (175 mm) 4-3/4" (120 mm)
03190
03190 7-1/2" (190 mm) 2-3/8" (60 mm) 6-7/8" (175 mm)
279-05
1132 2
1133 4
1134 6
ND 11
1135 10
(500 volts)
1136 16
1137 20
1138 25
Length 1-9/32” Length 2” Length 2” Length 2-9/16” Length 2-5/8”
Dia. 5/8” Dia. 7/8” Dia. 1-1/16” Dia. 1-5/16” Dia. 1-13/16”
Bottom Screws
Cat. No. Type Amp. Color
FLINK TRAGA 1108 2 Rose
(QUICK ACTION) (SLOW ACTION)
1109 4 Brown
Cat. No. Type Amp. Cat. No. Type Amp. 1110 6 Green
1055 2 — — — 1111 S 11 10 Red
1056 4 — — — 1112 16 Gray
D1 1113 20 Blue
Figure 1 1057 6 — — —
(250 volts) 1114 25 Yellow
1058 10 — — —
1059 15 — — — 1116 35 Black
1118 S 111 50 White
1062 2 1062T 2
1119 63 Gold
1063 4 1063T 4
1064 6 1064T 6
D 11 D 11
Figure 2 1065 10 1065T 10
(500 volts) (500 volts)
1066 16 1066T 16
1067 20 1067T 20 Bottom Screws
1068 25 1068T 25 Type Amp.
Cat. No.
1070 35 1070T 35
D 111 D 111 1125 80
Figure 3 1072 50 1072T 50 S 1V F
(500 volts) (500 volts) 1126 100
1073 63 1073T 63
1127 125
1074 D 1V 80 1074T D 1V 80
Figure 4 1128 SVF 160
1075 (500 volts) 100 1075T (500 volts) 100 1129 200
— — — 1081T 125
DVH
Figure 5 — — — 1082T 160
(500 volts)
— — — 1083T 200
280-05
Catalog No. Dimensions (mm) Wire Size (mm2) Catalog No. Description Dimensions (mm)
4729S 102 x 15 x12 2.5 4720 Single Pole 18 x 9 x 14
4729M 114 x 18 x 20 4 4721 Double Pole 18 x 16 x 14
4729L 117 x 18 x 20 6 4722 Three Pole 18 x 24 x 14
2463 2472
2308 2327
281-05
1680 1691
1678 1693
•Pins: 5 mm
1675 •Diameter: 19 mm
between centers Catalog No. Description Finish
•Brass 1691 Single Wall Plug White
1693 Single Surface Receptacle White
•Solid units are furnished
with safety contacts
1682
•Manufactured in bakelite 6 AMP. PINS are:
Catalog No. Description Finish Round—4 mm Diameter—19 mm between Centers—Brass—Slotted
1675 Single Wall Plug Brown 10 AMP. PINS are:
1676 Single Wall Plug White Round—5 mm Diameter—10 mm between Centers—Brass—Solid
1678 Surface Receptacle White
1680 Flush Receptacle White
1682 Double Surface Receptacle White
Watertight receptacles, double watertight, IP67 for IP44 Double watertight for container use, 3-poles with
earth 32 Amp. 3 hours position.
Catalog
No. Voltage Poles Ampere Earth pin.
Catalog Earth
Description
04161 380 4 16 6H No. Pin
03658
04164 380 4 32 6H 03658 Container female plug 3H
04167 380 4 63 6H
04168 380 5 63 6H
Double watertight for container use, 3-poles with
Double watertight for container use, 3-poles with earth 32 Amp. 3 hours position.
earth 32 Amp. 3 hours position.
Catalog Earth
Catalog Earth Description
Description No. Pin
No. Pin
Container receptacle
03645 Container male plug 3H 03671 with switch 3H
03645 03671
2-Pin Weatherproof Butyl Cord Connectors Cord Connector and Multi-Way Plug
10 Amp. 10 Amp.
282-05
70160
52906 52925
FLANGED
INLETS
MULTIPLE OUTLET POWER STRIP
52925 European (SCHUKO) 5 Outlet Power Strip With On/Off 70180 European (SCHUKO) Flanged Inlet. Black. 16/10 ampere
Lighted Switch. Black/Silver color. 16/10 ampere 250 volts. 250 volt. Meets CEE 7-7 requirements. 83 x 83 mm size.
Supplied with 2 meters of cord and molded-on plug. Equipped with weatherproof double pole on/off switch.
Approvals—VDE, OVE. Five inch wire leads provided. Mates with European
52906 European (SCHUKO) 6 Outlet Power Strip. Black/Silver (SCHUKO) connectors and French cord connectors.
color. 16/10 ampere 250 volts. Supplied with 2 meters of Provided with lift lid and built-in connector restraining device
cord and molded-on plug. that prevents disengagement when subjected to vibration.
Approvals—VDE, OVE. 70190 Same as No. 70180 without switch.
283-05
285-05
286-05
30 Day
2153 12th Street, P.O. Box 14057 • Sarasota, FL 34278 U.S.A. Money Back
Phone: 800-346-0789 • 941-365-3655 • Fax: 941-957-1006
Web Site: www.waterram.com • E-mail: waterram@acun.com
Guarantee
0285-04 4/28/05 1:38 PM Page 1
287-05
NOTE: Sloan Naval Flushometers may be substituted for any of the above.
Dolphin Flushometers
Features
Flushometers for Private and Maritime Ships
•Oil operated control chamber is completely isolated 120-XYV Quiet, chrome-plated brass closet Flushometer for exposed
from water supply. installation includes metal lever handle, 1-inch I.P.S. screw-
•Replaceable Delrin main seat protects the flush valve driver angle stop with protective cap, adjustable tailpiece,
body from irreparable damage caused by wire-drawing. elbow flush connection and coupling for 1-1/2-inch back spud,
•Rugged construction wall and spud flanges.
•Positive manual opening and mechanical closing assures
a complete cycle of the valve that is not dependent on
120 Same as above except Flushometer includes a vacuum breaker.
water pressure.
• Handle can be positioned on either the left, front, or right
for the most convenient installation.
Variations
-U Flush connection for 1-1/4" spud
-YG Bumper on valve for seat cover
-YN Bumper on flush pipe for closed front seat 186-XYV Quiet, chrome-plated brass urinal Flushometer for exposed
-YO Bumper on angle stop for open front seat installation includes metal lever handle, 3/4-inch I.P.S. screw-
If vacuum breaker is desired delete-XYV driver angle stop with protective cap, adjustable tailpiece, flush
connection and coupling for 3/4-inch top spud, wall and spud
How to Order flanges.
1. Name of Valve (by type and class if required
for U.S. Navy) 186 Same as above except Flushometer includes a vacuum breaker.
2. Model Number
3. Letters designating variations, if any.
example: Dolphin 110-YG
Shower Heads
Can’t drip or clog because they’re automatically self-cleaning
The Sloan Act-O-Matic® Model AC-450
Features Shower Head incorporates Chrome-plated brass construction with integral mounting
a Spray Disc that moves flange, adjustable spray direction, needle-spray pattern
• Self-Cleaning action flushes interior design with integral (2.5 gpm/9.4 Lpm maximum) flow
upward and downward
after each use. control, tapped for 1/2" I.P.S. supply. Includes mounting
DISC automatically due to line
• Will Not Clog or Drip DISC UP
plate and two (2) vandal-resistant screws.
water pressure. With water
• Even Spray Pattern DOWN
ON, the disc moves downward into Conforms to all requirements of ANSI/ASME Standards
• Simple Construction – Single moving
shower position, delivering an evenly A112.18.1M
part inside
distributed spray that can be directed as
• Water Discharge limited to
desired. When the water is turned OFF, Model AC-11
2.5 gpm/9.4 Lpm.
the Disc moves upward into the draining Chrome-plated brass construction, universal ball joint,
• Adjustable Spray Direction &
position. All sand and other water-borne thumb screw volume control, vandal-resistant set screw
Flow Control
substances are completely washed feature, needle-spray pattern design. Includes integral
• Connector fits all standard
out of the system. (2.5 gpm/9.4 Lpm maximum) flow control. Tapped for
shower arms.
1/2” I.P.S. supply.
For your Sloan Sales Representative, please call or fax Sloan Valve Co.
10500 Seymour Ave. • Franklin Park, IL 60131 • Phone: 847-671-4300 • Fax: 847-671-6944 • www.sloanvalve.com
Domestic and international distributors, and technical and product information is available at our website: www.sloanvalve.com
0288-03 4/28/05 1:39 PM Page 288
288-05
1 Dolphin Flushometer
2 Parts List—Dolphin Flushometer Valve
3 Item Part
4 Number Number Description
1 DO-1 Cover Nut CP
5 6 2 DO-2 “O” ring-Seat (1 required; 6 per pkg.) (Cover Gasket)
3 DO-28 Retaining Ring (1 required; 24 per pkg.)
7 4 DO-4 Stem Nut RB (1 required; 6 per pkg.)
5 DO-5 Piston
6 DO-6 “O” ring-Piston (1 required; 6 per pkg.)
8 7 DO-7 Piston Spring (1 required; 6 per pkg.)
8 DO-11 Cover Screw CP (4 required; 24 per pkg.)
9 DO-10 Upper Body CP
10 9 10 DO-20 Handle and Socket Assembly CP
DO-26 Socket
DO-36 Handle Lever Cap
11 DO-3 Regulating Screw RB (1 required; 6 per pkg.)
12 DO-9 Stem RB
11 13 SH-75 “O” ring-Throttle Seal (2 required)
12 14 DO-14 Bushing RB
13 15 DO-16 Compression Spring (Main Spring)
16 DO-17 Insert RB (1 required; 6 per pkg.)
17 DO-15 “Flex-Sac”
18 DO-18 Seating Nut
19 DO-21 Main Seat, Delrin
14 20 DO-22 “O” ring-Seat Assembly
21 DO-13-NC Lower Body CP-Closet
DO-13-NU Lower Body CP-Urinal
15 22 DO-90-AAGNC Valve Body and Handle Assembly—Dolphin Type I
DO-90-AAGNU Valve Body and Handle Assembly—Dolphin Type II
23 H-710-A Bak-Chek® Control Stops are available in several styles: chrome-plated
16 or Naval brass, and Adjustable and Ground Joint Tail connection
17 options for 3/4” or 1” Inlet (Control Stop may require A-35 Reducer
Bushing or 1” F-41-A or 1/2” F-42-A Sil-Braze Adapter)
24 F-7 Supply Flange CP for 3/4” or 1” Inlet (Supplied When Valve is NOT
Ordered with Sweat Solder Kit)
18 25 H-633-AA 1" (25 mm) Sweat Solder Kit with Cast Set Screw Flange CP
19 H-636-AA 3/4" (19 mm) Sweat Solder Kit with Cast Set Screw Flange CP
20
26A F-41-A 1" (25 mm) Sil-Braze Adapter Assembly (includes F-40 and F-41-AA)
21 F-40 1" (25 mm) Sil-Braze Adapter (CP or RB)
F-41-AA Solder Ring kit for 1” (25 mm) Sil-Braze Adapter and F-48 “O” Ring
26B F-42-A 1/2" (13 mm) Sil-Braze Adapter Assembly (includes F-40 and F-42-AA)
F-40 1/2" (13 mm) Sil-Braze Adapter (CP or RB)
F-42-AA Solder Ring kit for 1/2” (13 mm) Sil-Braze Adapter and F-48 “O” Ring
26C A-35 3/4” (19 mm) NPT x 1/2” (13 mm) NPT Reducer Bushing
27 — Vacuum Breaker Assembly, Flush Connection, and Spud Coupling
25
26C
26B
26A
24 Replacement and Repair Kits
23
22 A DO-1000-A Piston with “O” ring (items 5, 6)
B DO-1001-A Repair Kit-Dolphin Handle (items 10, 11, 12, 13)
C DO-32 “Flex-Sac” Assembly (items 17, 18)
D DO-32-AA Repair Kit-“Flex-Sac” Assembly (items 2, 6, 13, 17, 18)
E DO-32-AAN Repair Kit-“Flex-Sac” and Stem (items 2, 6, 7, 13, 15, 17– 20)
F DO-19-A Seat Assembly with “O” ring (items 19 and 20)
G DO-12-A Upper Body Assembly (items 1–7 and 9–18)
27 H DO-13-A-NC Lower Body Assembly for Closet
(items 21A, H-6 Coupling, and NH-5 Ground Joint Tail)
For your Sloan Sales Representative, please call or fax Sloan Valve Co.
10500 Seymour Ave. • Franklin Park, IL 60131 • Phone: 847-671-4300 • Fax: 847-671-6944 • www.sloanvalve.com
Domestic and international distributors, and technical and product information is available at our website: www.sloanvalve.com
0289-03 4/28/05 1:39 PM Page 1
289-05
Parts List
Naval Flushometer
1 CN-74-A Cover Assembly CP
2 CN-1007-A Cap Screw Repair Kit - 6 per pkg.
3 CN-1008-A Regulating Screw Repair Kit
4 CN-1002-A Piston w/Main Seat - Closet
CN-1003-A Piston w/Main Seat - Urinal
CN-1009-A Piston w/Main Seat - Shower
5 CN-76 Cover Gasket - 12 per pkg.
6 A-31 Handle Gasket - 48 per pkg.
7 B-39 Handle Seal - 12 per pkg.
8 B-32-A Handle Assembly CP - 6 per pkg.
9 A-6 Handle Coupling CP
10 B-7-A CP Socket Assembly
11 B-32 CP Handle Grip
12 B-50-A Handle Repair Kit - 6 per pkg.
13 C-42-A 3'' Push Button Assembly CP
14 C-1000-A 3'' Push Button Replacement Kit
15 C-64-A 3'' Push Button Repair Kit
16 V-500-A 3/4'' x 9'' Vacuum Breaker
V-500-A 1-1/4'' x 9'' Vacuum Breaker
V-500-A 1-1/2'' x 9'' Vacuum Breaker
17 V-551-A Vacuum Breaker Repair Kit
18 F-5-A 3/4'' Spud Coupling CP
F-5-A 1-1/4'' Spud Coupling CP
F-5-A 1-1/2'' Spud Coupling CP
19 H-550 Stop Coupling CP
20 NH-551-A Adjustable Tailpiece 2-1/16'' CP
21 H-553 “O” Ring - 24 per pkg.
22 H-6 Ground Joint Stop Coupling CP
23 NH-5 Ground Joint Tailpiece 1-5/8''
24 H-710-A 1'' Adjustable Tailpiece SD Bak-Chek Control Stop CP
H-710-A 3/4'' Adjustable Tailpiece SD Bak-Chek Control Stop CP
25 H-710-AG 1'' Ground Joint Screwdriver Bak-Chek Control Stop CP
H-710-AG 3/4'' Ground Joint Screwdriver Bak-Chek Control Stop CP
26 H-541-A Control Stop Repair Kit*
H-543-A Control Stop Repair Kit**
27 H-622 CP Bonnet*
H-577 CP Bonnet**
28 H-573 Control Stop Cap CP*
Repair Parts
H-582 Control Stop Cap CP** CROWN/NAVAL VALVE WASHER SET - 6 per pkg. includes:
29 H-1010-A Vandal Resistant Stop Cap Assem.* 5314050 CN-1010-A 5, 6, 7, C, H, J, Cap Screw Gasket & Regulating Screw Packing
H-1009-A Vandal Resistant Stop Cap Assem.**
PISTON REBUILD KIT-CLOSET & URINAL - 6 per pkg. includes:
30 H-574 Control Stop Cap w/Bumper* 5314094 CN-1004-A 5, A, B, C, D, H, J, Cap Screw Gasket & Regulating Screw Packing
31 H-576 Control Stop Cap w/Extended Bumper*
PISTON REBUILD KIT-SHOWER - 6 per pkg. includes:
5314184 CN-1006-A 5, A, B, C, D, H, J, Cap Screw Gasket & Regulating Screw Packing
* for use with H-700-A 1'' and 3/4'' and H-600-A 1'' Screwdriver
Bak-Chek® Control Stops NOTE: NAVAL PISTONS CAN BE USED TO REPLACE PISTONS IN OLDER CROWN
** for use with H-600-A 3/4'' Screwdriver Bak-Chek® Control Stops AND STAR FLUSHOMETERS.
NO.4 PISTON
(EXPLODED VIEW)
For your Sloan Sales Representative, please call or fax Sloan Valve Co.
10500 Seymour Ave. • Franklin Park, IL 60131 • Phone: 847-671-4300 • Fax: 847-671-6944 • www.sloanvalve.com
Domestic and international distributors, and technical and product information is available at our website: www.sloanvalve.com
0290-03 4/28/05 1:43 PM Page 1
290-05
MOTT COMPANY
TOILET SEATS
Solid plastic open front seat. Solid plastic seat and cover with Solid plastic seat and cover with
Available in black or white color regular hinge. For round front regular hinge. For elongated rim
for plain rim or elongated rim water closet. Available in open or water closet. Available open or
water closet. closed front. closed front.
PART # COLOR RIM TYPE PART # COLOR TYPE PART # COLOR TYPE
90901 Black Plain 90920 White Closed Front 90930 White Closed Front
90905 White Plain 90925 White Open Front 90935 White Open Front
90910 Black Elongated
90915 White Elongated
291-05
MOTT COMPANY
84400 SINGLE HANDLE
EL 1.6 10” R TOILET - WHITE KITCHEN FAUCET
1.6 GPF 359mm (14-1/8”) Rim height. • 8” Center
Elongated 254mm (10”) Rough Flush • Chrome plated all brass body.
Valve toilet, less seat (vitreous china) • Metal Lever Handle
Elongated bowl only two (2) bolt caps, • 1/2” IPS connection
359mm (14-1/8”) rim height, top spud, PART # DESCR
siphon jet flush action, 254mm (10”) 114139 with Spray
rough-in. 114138 without Spray
TWIN HANDLE
KITCHEN FAUCET
84411 • 8” Center
17” EL 1.6/FV 10”R - WHITE • Chrome plated all brass body.
1.6 GPF Elongated 432mm (17”) Rim • Acrylic Handle
Height, 254mm (10”) Rough flush • 1/2” IPS connection
valve toilet, less seat (Vitreous china).
PART # DESCR
114143 with Spray
114142 without Spray
SINGLE HANDLE
LAVATORY FAUCET
• 4” Center
14654 • Chrome plated all brass body.
1.0 GPF URINAL - WHITE • Acrylic Handle
• 1/2” IPS connection
Washout flush action (Vitreous china)
Urinal, top inlet spud, outlet spud with PART # DESCR
38mm (1-1/2”) tubing tailpiece, less 114137 with Pop-up Assembly
supporting screws. 114136 without Pop-up Assembly
TWO HANDLE
LAVATORY FAUCET
• 4” Center
• Chrome plated all brass body.
• Acrylic Handle
197970 • 1/2” IPS connection
WALL HUNG LAVATORY - WHITE PART # DESCR
Vitreous china 114141 with Pop-up Assembly
508mm x 457mm (20” x 18”) 114140 without Pop-up Assembly
Faucet holes on 102mm (4”) centers.
POP-UP
WASTE ASSEMBLY
• Heavy Pattern
• Chrome plated brass.
COUNTERTOP LAVATORY - WHITE • Brass casting
Vitreous china
Self-rimming with template and color
matched sealant. PART # DESCR
508mm x 432mm (20” x 17”) 73425 Pop-up Assembly
81126 102mm (4”) centers
81142 203mm (8”) centers FAUCETS ALSO AVAILABLE
WITH LEVER HANDLES - Specify if desired
GRAB BARS
• Grab Bars
• Tub Bars
• Shower Bars
• Angle Bars
• Commode Bars
GRAB TUB SHOWER ANGLE COMMODE
BARS BARS BARS BARS BARS
292-05
MOTT COMPANY
Lavatory Angle Supply Pipe Stainless Steel Lavatory
Chrome plated brass I.P.S. angle supply pipe with Type 304 stainless steel #18 gauge lavatory with antisplash rim,
reducing coupling, loose key stop and escutcheon. splash back and stainless steel bulkhead mounting brackets; fitted
One key furnished with each pair of supplies. with one Model No. 90405 and one Model No. 90410 C.P.
Model. No. Size Net Weight
self-closing basin faucets and Model No. 90420 C.P. pop up
90425 3/8” x 6” x 9” (152.40 mm x 228.60 mm) 1-1/2 lb. (.6804 kg)
waste.
90430 1/2” x 6” x 9” (152.40 mm x 228.60 mm) 1-3/4 lb. (.7938 kg)
293-05
MOTT COMPANY
294-05
MOTT COMPANY
Chrome plated cast Chrome plated cast
Chrome plated brass brass open pattern brass soap dish with
double sink faucet, soap dish with drain holes and
exposed deck mount chrome plated cast chrome plated cast
1/4” (6.35 mm) I.P.S. brass bracket. brass bracket.
male threaded union Model No. Size Net Weight Model No. Size Net Weight
tailpieces 8” 4-3/8” x 3-3/8” 4-1/4” x 3” 1-1/2 lbs.
(203.20 mm) center 94030 3/4 lb. (.34 kg) 94035
(111.13 mm x 85.73 mm) (107.95 mm x 76.20 mm) (.68 kg)
to center 8” (203.20 mm) swing spout and
lever handles indexed “H” and “C”.
Model No. Net Weight
91015 4 lbs. (1.81 kg)
295-05
MOTT COMPANY
93915
18” x 24” 13-1/2 lbs. Heavy duty lever drain, bronze
(457.20 mm x 609.60 mm) (6.13 kg) body, stainless steel strainer. Chrome plated cast brass
tumbler and toothbrush holder.
Model No. Net Weight Inside diameter of ring 2-5/8” (66.68 mm)
91210 8 lbs. (3.63 kg)
Model No. Net Weight
Chrome plated
94045 1/2 lb. (.23 kg)
brass towel bar
with chrome plated Chrome plated
cast brass bulkhead brackets. brass serrated
towel bar with chrome
Model Net plated cast brass bulkhead brackets.
No. Size Weight
1” O.D. x 18” 1-1/2 lbs. Model Net Chrome plated cast brass
93940 No. Size Weight ring tumbler holder.
(25.40 mm x 457.20 mm) (.68 kg)
1” O.D. x 24” 1-3/4 lbs. 93930
1” O.D. x 18” 1-1/2 lbs. Inside diameter of ring 2-5/8” (66.68 mm)
93945 (25.40 mm x 457.20 mm) (.68 kg)
(25.40 mm x 609.60 mm) (.79 kg)
1” O.D. x 24” 2 lbs. Model No. Net Weight
1” O.D. x 30” 2 lbs. 93935
94001 (25.40 mm x 609.60 mm) (.91 kg) 94101 1/2 lb. (.23 kg)
(25.40 mm x 762.00 mm) (.91 kg)
296-05
MOTT COMPANY
URINAL SHOCKMOUNTED SINK FAUCETS
1—China urinal Chrome plated brass double sink
2—Concussion mounting faucet exposed deck mount with
(Neoprene bonded to steel) loose key stops, 1/2” (12.70 mm)
4, 6, 7, 8—Bolts, nuts, Neoprene I.P.S. female flange inlets, 8”
sleeves and washers (203.20 mm) center to center, 6”.
5—Speed grip nuts (152.40 mm) swing spout, soap
9, 10, 11, 12—Bolts, nuts and dish and lever handles indexed
washers for mounting
“H” and “C”.
15—Outlet tailpiece
20, 21—Flexible supply tubing Model No. Net Weight
and tailpiece 91010 5 lbs. (2.27 kg)
27—Neoprene concussion snubber
29, 30, 31, 32—Bolts, nuts and
washers for snubber
Chrome plated brass double
Sectional View Showing Shockproof
sink faucet, exposed deck mount,
Method of Support 1/2” (12.70 mm) I.P.S. female
inlets 8” (203.20 mm) center to
Model No. Net Weight center, 6” (152.40 mm) swing
90115 32 lbs. (14.51 kg) spout, soap dish and lever
handles indexed “H” and “C”.
Vitreous china shockmounted urinal with shock mounted neoprene
and steel concussion mounting, bolts, nuts, washers and rubber Model No. Net Weight
sleeves, rubber snubbers, chrome plated dolphin flush valve, with 91005 4 lbs. (1.81 kg)
metal handle, 1/2’’ screw driver angle stop, 3/4” O.D. straight flush
connection with spud nut and escutcheon.
STOP VALVES
Chrome plated brass angle pattern loose key.
One key furnished with each pair of stops.
WATER CLOSET SHOCKMOUNTED Model No. Size Net Weight
90505 3/8” (9.53 mm) 1/2 lb. (.23 kg)
Vitreous china shockmounted water 90510 1/2” (12.70 mm) 1/2 lb. (.23 kg)
closet with neoprene and steel concussion
mounting, rubber snubber, neoprene and Chrome plated brass straight pattern loose key.
steel anchor bars, bolts, nuts, washers and One key furnished with each pair of stops.
rubber sleeves; neoprene discharge
Model No. Size Net Weight
elbow, stainless steel clamps. Chrome
90515 3/8” (9.53 mm) 1/2 lb. (.23 kg)
plated dolphin flush valve with metal
90520 1/2” (12.70 mm) 1/2 lb. (.23 kg)
handle, 1’’ screw driver angle stop,
chrome plated 1-1/2” O.D. elbow flush
connection with flexible hose, clamps, Chrome plated brass angle pattern with
chrome plated spud escutcheon, gasket wheel handle.
and ring: black plastic open front seat Model No. Size Net Weight
with self sustaining check hinge. 90525 3/8” (9.53 mm) 1/2 lb. (.23 kg)
90530 1/2” (12.70 mm) 1/2 lb. (.23 kg)
Model No. Net Weight
90045 65 lbs. (29.48 kg) Chrome plated brass straight pattern with
wheel handle.
Model No. Size Net Weight
MOTT COMPANY
TOILET PAPER HOLDERS BRASS CONTINUOUS WASTE
Chrome plated brass toilet paper holder with chrome
plated brass lock spring roller and chrome plated cast
brass bulkhead brackets.
Model No. Net Weight
94105 2 lbs. (.91 kg) 1-1/2” O.D. No. 17 gauge with slip joint inlets 24” center to center,
end cleanout cap, and 1-1/2” O.D. end outlet tailpiece.
TRAPS
Chrome plated brass No. 17 gauge swivel Chrome plated brass straight flush connection with spud
pattern “P” trap with cleanout, slip joint inlet. nut and escutcheon.
Model No. Size Net Weight
Model 1-1/4” O.D. x 6”
No. Size Net Weight 90730 1/2 lb. (.23 kg)
(31.75 mm x 152.40 mm)
93801 1-1/4” (31.75 mm) 1 lb. (.45 kg) 1-1/2” O.D. x 6”
90735 1/2 lb. (.23 kg)
93805 1-1/2” (38.10 mm) 1-1/2 lb. (.45 kg) (38.10 mm x 152.40 mm)
1-1/2” O.D. x 24”
90740 1-3/4 lb. (.79kg)
(38.10 mm x 609.60 mm)
Chrome plated brass No. 17 gauge
swivel pattern full “S” trap with cleanout,
slip joint inlet. Chrome plated brass elbow flush connection with
Model spud nut and escutcheon.
No. Size Net Weight
Model Net
1-1/4” x 20-1/2”
93810 2 lb. (.91 kg) No. Size Weight
(31.75 mm x 520.70 mm)
1-1/2” O.D. x 5 x 11-1/2” 1 lb.
1-1/2” x 20-1/2” 90745
93815 2-1/2 lb. (1.13 kg) (38.10 mm x 127 mm x 292.10 mm) (.45 kg)
(38.10 mm x 520.70 mm)
1-1/2” O.D. x 1-1/4” O.D. x 5” x 11-1/2”
3/4 lb.
90801 (38.10 mm x 31.75 mm x 127 mm x
(.34 kg)
292.10 mm)
Chrome plated cast brass sediment and hair
intercepter trap, slip joint inlet and I.P.S.
female threaded outlet. Chrome plated brass vacuum breaker.
Model Model No. Size Net Weight
No. Size Net Weight 1-1/2” I.P.S. Female x 1/4 lb.
90810
93825 1-1/2” (38.10 mm) 9 lb. (4.08 kg) 1-1/2” I.P.S. Male (.11 kg)
MOTT COMPANY
TRAPS
Cast Brass Ground Joint Swivel Pattern “P” Traps With Cleanout
Model No.
Size Weight
Inlet: Outlet: Inlet: Outlet: Inlet: Outlet: Inlet: Outlet:
inches Lbs. Finish
Silbraze Silbraze Silbraze I.P.S. Female I.P.S. Female Silbraze I.P.S. Female I.P.S. Female
(mm) (kg)
C.T.S. C.T.S. C.T.S. Threaded Threaded C.T.S. Threaded Threaded
1-1/4 5.06 Rough 91520 91601 91740 91820
(31.75) (2.30) Chrome 91525 91605 91745 91825
1-1/2 3.18 Rough 91530 91610 91801 91830
(38.10) (1.44) Chrome 91535 91615 91805 91835
2 8.28 Rough 91540 91620 91810 91840
(50.80) (3.76) Chrome 91545 91625 91815 91845
C.T.S. = Copper Tube Size
Cast Brass Ground Joint Swivel Pattern “P” Traps With Cleanout
Model No.
Size Weight
Inlet: Outlet: G.J.U. Inlet: Outlet: Inlet: Outlet: G.J.U. Inlet: Outlet:
inches Lbs. Finish
Silbraze I.P.S. Female Silbraze Silbraze I.P.S. Female I.P.S. Female I.P.S. Female Silbraze
(mm) (kg)
C.T.S. Threaded C.T.S. G.J.U. C.T.S. Threaded Threaded Threaded G.J.U. C.T.S.
1-1/4 6.69 Rough 91630 91710 91901 91930
(31.75) (3.03) Chrome 91635 91715 91905 91935
1-1/2 5.89 Rough 91640 91720 91910 91940
(38.10) (2.67) Chrome 91645 91725 91915 91945
2 10.16 Rough 91701 91730 91920 92001
(50.80) (4.60) Chrome 91705 91735 91925 92005
C.T.S. = Copper Tube Size
G.J.U. = Ground Joint Union
299-05
MOTT COMPANY
TRAPS
Cast Brass Ground Joint Swivel Pattern “P” Traps With Cleanout
Model No.
Size Weight
Inlet: G.J.U. Outlet: Inlet: G.J.U. Outlet: Inlet: Outlet: Inlet: Outlet:
inches Lbs. Finish
I.P.S. Female Silbraze I.P.S. Female I.P.S. Female Silbraze Silbraze Silbraze I.P.S. Female
(mm) (kg)
Threaded C.T.S. Threaded Threaded G.J.U. C.T.S. C.T.S. G.J.U. C.T.S. Threaded
1-1/4 6.69 Rough 92010 92040 92230 92310
(31.75) (3.03) Chrome 92015 92045 92235 92315
1-1/2 5.89 Rough 92020 92101 92240 92320
(38.10) (2.67) Chrome 92025 92105 92245 92325
2 10.16 Rough 92030 92110 92301 92330
(50.80) (4.60) Chrome 92035 92115 92305 92335
C.T.S. = Copper Tube Size
G.J.U. = Ground Joint Union
Cast Brass Ground Joint Swivel Pattern “P” Traps With Cleanout
Model No.
Size Weight
Inlet: G.J.U. Outlet: G.J.U. Inlet: G.J.U. Outlet: Inlet: Outlet: G.J.U. Inlet: Outlet:
inches Lbs. Finish
I.P.S. Female I.P.S. Female I.P.S. Female Silbraze Silbraze I.P.S. Female Silbraze Silbraze
(mm) (kg)
Threaded Threaded Threaded G.J.U. C.T.S. G.J.U. C.T.S. Threaded G.J.U. C.T.S. G.J.U. C.T.S.
1-1/4 6.66 Rough 92120 92201 92340 92420
(31.75) (3.02) Chrome 92125 92205 92345 92425
1-1/2 7.16 Rough 92130 92210 92401 92430
(38.10) (3.25) Chrome 92135 92215 92405 92435
2 12.04 Rough 92140 92220 92410 92440
(50.80) (5.46) Chrome 92145 92225 92415 92445
C.T.S. = Copper Tube Size
G.J.U. = Ground Joint Union
300-05
GLIX PRODUCTS
DRAINING SOAP DISH RECESSED TOILET PAPER HOLDER FACIAL TISSUE
GLIX DSD/500 GLIX RTPH/500 DISPENSER
Slotted drain holes; Fits into wall opening 5-1/4 x 5-1/4” GLIX SM/500
3-1/8 x 3-7/8” W Overall size: 6-1/4 x 6-1/4” Takes standard
commercial tissue box.
Chrome, polished bronze
TOOTHBRUSH HOLDER or stainless steel finish.
GLIX TBH/515
1-1/8 X 3” W
ELECTRIC
SINGLE ROBE HOOK HAND DRYER
GLIX SRH/500-SH GLIX EHD 100
2-1/8 X 1-1/2 X 1-5/8” Surface Mounted. Area
required 10-3/4” x 8” x 7”.
TOWEL BAR
30-second drying cycle.
GLIX STB/500-4
Chrome or white.
3/4” Polished aluminum or stainless
steel. Square bar. ROUND WALL
HOOK & BUMPER 18”, 24” or 36” length. ASH URN
GLIX HB/90 GLIX AUR/770
3” Projection; cast brass, Stainless steel.
cast aluminum polished 7” center mounting
chrome. holes. 8-3/4” deep; 9”
front to back. Exposed
36” REPLACEMENT BAR screws.
Clear lucite plastic. 3/4” diam.
CP 36-36”, CP 24-24”, CP 18-18”
LIQUID SOAP
HANDICAP GRAB BAR DISPENSER
GLIX GB/650 GLIX DL/50
SPARE ROLL TOILET
ID of bar: 1”, 1-1/4”, 1-1/2” Plastic globe.
PAPER HOLDER
Flange 3” Chrome bracket.
GLIX STTH/500
Specify length: 8” to 60” 7” height; 16 oz.
Polished chromium plated or
Stainless steel, chrome/brass, Polyethylene globe.
24K gold plated.
aluminum. Exposed screws.
301-05
Clears grease, sand and ice with a stream 3-6 ft. Telescoping
of high pressure water that pulverizes
stoppage and flushes it away. Gives you wall Closet Auger
to wall cleaning action. Vibra-pulse® helps Durable double layer spring enables
Wire Rope Center Cable hose glide around tight bends in auger to go through any bowl
narrow lines. Removable hose reel for without kinking. Additional 3 ft.
Heavy-gauge wire coiled tightly around compact storage.
42-strand aircraft-type wire rope length stored in tube for use when
and heat treated. Cat. No. J-1450-A Includes 150 ft. x 1/4" clog is just beyond bowl.
and 30 ft x 1/8" hoses and nozzle sets. Cat. No. T6FL-DH
302-05
Applicable Standards
ANSI B 16.24
MSS-SP-6
MSS-SP-9
MSS-SP-25
MSS-SP-82
Tests
Shell – 350 PSIG Hydrostatic
Seat – 225 PSIG Hydrostatic
WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0301-03 4/28/05 2:07 PM Page 1
303-05
Applicable Standards
ANSI B16.2
MSS-SP-6
MSS-SP-9
MSS-SP-25
MSS-SP-82
Tests
Shell – 350 PSIG Hydrostatic
Seat – 225 PSIG Hydrostatic
Fig. B15G / Fig. B15A (Dimensions in Inches) Fig. B15SW (Dimensions in Inches)
Globe Angle
Size A L B C D Open D Open G
1-1/2 6-1/2 – 5 3-7/8 9-1/4 – Size A B C D E No. x Diam.
2 7 4 6 4-3/4 10-15/16 9-1/2 1-1/2 6-1/2 5 3-7/8 4-13/16 7/16 4 x 5/8
2-1/2 8-1/2 4-1/8 7 5-1/2 11-7/16 10-3/8 2 8 6 4-3/4 5-1/4 1/2 4 x 3/4
3 9-1/8 4-5/8 7-1/2 6 15-7/16 11-1/8 2-1/2 8-1/2 7 5-1/2 5-3/4 9/16 4 x 3/4
4 12 5-5/8 9 7-1/2 14 12-1/4 3 9-1/2 7-1/2 6 6-3/16 5/8 4 x 3/4
5 14 – 10 8-1/2 16-1/4 – 4 11-1/2 9 7-1/2 7 11/16 8 x 3/4
6 16-5/8 7-3/8 11 9-1/2 18 15-3/4 5 13 10 8-1/2 7-13/16 3/4 8 x 7/8
8 19-1/2 9-3/4 13-1/2 11-3/4 21-1/4 19 6 13 11 9-1/2 8-1/4 13/16 8 x 7/8
8 19-1/2 13-1/2 11-3/4 10-3/16 15/16 8 x 7/8
Size E F Globe F Angle G No. x Diam. 10 24-1/2 16 14-1/4 12-1/16 1 12 x 1
1-1/2 7/16 7-1/16 – 4 x 5/8 12 27-1/2 19 17 12-1/2 1-1/16 12 x 1
2 1/2 7-1/16 7-7/8 4 x 3/4
2-1/2 9/16 7-7/8 7-7/8 4 x 3/4
3 5/8 8-13/16 8-13/16 4 x 3/4
4 11/16 11 11 8 x 3/4
5 3/4 12-13/32 – 8 x 7/8
6 13/16 14 14 8 x 7/8
8 15/16 13-1/2 15-3/4 8 x 7/8
WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0302-03 4/28/05 2:08 PM Page 1
304-05
Applicable Standards
ANSI B16.24
MSS-SP-6
MSS-SP-9
MSS-SP-25
MSS-SP-82
Tests
Shell – 350 PSIG Hydrostatic
Seat – 225 PSIG Hydrostatic
WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0303-03 4/28/05 2:09 PM Page 1
305-05
WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0304-03 4/28/05 2:10 PM Page 1
306-05
WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0305-03 4/28/05 2:30 PM Page 1
307-05
WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0306-03 4/28/05 2:31 PM Page 1
308-05
WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0307-03 4/28/05 2:32 PM Page 1
309-05
WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0308-03 4/28/05 2:33 PM Page 1
310-05
WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0309-03 4/28/05 2:33 PM Page 1
311-05
Fig. C17F6RT
Face Length Part Material
to Center of Body ASTM A216 GR WCB
Sizes Face to Top Lever
in. in. in. in. Bonnet ASTM A216 GR WCB
Fig. C16F6RT 1/2 4-1/4 3 5 Ball ASTM A351 GR CF8M
Face Length Part Material 3/4 4-5/8 3-1/8 5 Yoke ASTM A216 GR WCB
to Center of Body ASTM A216 GR WCB 1 5 3-3/8 6-3/8 Stem ASTM A182 GR F316
Sizes Face to Top Lever Retainer ASTM A216 GR WCB 1-1/2 6-1/2 4-1/8 9 Lever ASTM A216 GR WCB*
in. in. in. in. 2 7 4-5/8 11 Gland Flange ASTM A216 GR WCB
Ball ASTM A351 GR CF8M
2 7 4-1/8 9 2-1/2 7-1/2 5-1/4 14
Stem ASTM A182 GR F316 Gland Ring ASTM A182 GR F316
2-1/2 7-1/2 4-3/4 11 3 8 7-3/8 16
3 8 5-1/4 14 Cover ASTM A216 GR WCB Stopper Stainless Steel
4 9 8-1/2 18
4 9 6-1/4 16 Lever Boss ASTM A351 GR CF8M Ball Seat Reinforced Teflon
6 15-1/2 12-7/8 24
6 10-1/2 7-5/8 20 Lever ASTM A120 (Pipe)* 8 18 15-3/8 30 Thrust Washer Virgin Teflon
8 11-1/2 11 24 Seat Reinforced Teflon 10 21 17-1/8 40 Bonnet Stud ASTM A193 GR B7
10 13 12-3/8 30 Gland Ring ASTM A182 GR F316 12 24 18-3/4 48 Bonnet Nut ASTM A194 GR 2H
12 14 15-1/2 36 Gland Bolt ASTM A276 GR F316 Snap Ring Steel Chrome Plated
Fig. C37F6RT
Joint Bolt ASTM A276 GR F316 Packing Teflon
Fig. C36F6RT Face Length
Washer ASTM A276 GR F316 to Center of Gasket Teflon
Face Length Washer Teflon Sizes Face to Top Lever Spring Stainless Steel
to Center of in. in. in. in.
Sizes Face to Top Lever Packing Teflon
in. in. in. in. Gasket Teflon 1/2 5-1/2 3 5 * Gear operators are recommended for sizes 8”
and larger.
2 8-1/2 4-1/8 6 Spring Stainless Steel 3/4 6 3-1/8 5
2-1/2 9-1/2 4-3/4 11 1 6-1/2 3-3/8 6
3 11-1/8 5-1/4 14 * Gear operators are recommended for sizes 8” 1-1/2 7-1/2 4-1/8 6
and larger. 2 8-1/2 4-5/8 11 Applicable Standards
4 12 6-1/4 16
6 15-7/8 7-5/8 20 2-1/2 9-1/2 5-1/4 14 Shell & Wall Thickness:
Applicable Standards 3 11-1/8 7-3/8 16
8 16-1/2 11 24 ANSI B16.34, Std. CL.
Shell & Wall Thickness: 4 12 8-1/2 18 Face-to-Face: ANSI B16.10
10 18 12-3/8 30 ANSI B16.34, Std. CL.
12 19-3/4 15-1/2 36 6 15-7/8 12-7/8 24 Flange Dimensions: ANSI B16.5
Face-to-Face: ANSI B16.10 8 19-3/4 15-3/8 30 Fire-Safe: API 607
(Dimensions in Inches) Flange Dimensions: ANSI B16.5 10 22-3/8 17-1/8 40
Fire-Safe: API 607 12 25-1/2 18-3/4 48
(Dimensions in Inches)
Tests: API 598 Tests: API 598
150 Lb. 300 Lb. 150 Lb. 300 Lb.
Shell: 450 PSIG 1125 PSIG (Hydrostatic) Shell: 450 PSIG 1125 PSIG (Hydrostatic)
Seat: 80 PSIG 80 PSIG (Air) Seat: 80 PSIG 80 PSIG (Air)
WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0310-03 4/28/05 2:36 PM Page 1
312-05
Part Material
1 Body A351 GR.CF8 CF8M
2 Bonnet A351 GR.CF8 CF8M
3 Ball A351 GR.CF8 CF8M
4 Yoke A351 GR.CF8, CF8M
5 Stem A182 GR.F304, F316
6 Lever A212 GR. WCB Applicable Standards Part Material
7 Gland Flange A351 GR.CF8, CF8M Shell Wall Thickness: 1 Body ASTM A351 CF8 CF8M
8 Gland Ring A182 GR.F304, F316 2 Retainer ASTM A351 CF8 CF8M
9 Stopper A167 GR.304 ANSI B16.34
Face-to-Face or End-to End: 3 Ball ASTM A351 CF8 CF8M
10 Ball Seat Reinforced Teflon 4 Stem ASTM A182 F304 F316
11 Thrust Washer Virgin Teflon ANSI B16.10 5 Cover ASTM A351 CF8 CF8M
12 Bonnet Bolt A276 GR.304 Flange Dimensions: 6 Lever Boss ASTM A351 CF8
13 Bonnet Nut A276 GR.304 ANSI B16.5 7 Lever ASTM A120 F(Pipe)
14 Snap Ring SK5 CR. Plating 8 Seat Reinforced Teflon
15 Packing Virgin Teflon Fire-Safe: API 607
9 Gland Ring ASTM A182 F304 F316
16 Gasket Virgin Teflon or Equivalent 10 Gland Bolt ASTM A276 304
Fig. S17F6RT (Dimensions in Inches) Tests 150 Lb. 300 Lb. 11 Joint Bolt ASTM A276 304
Shell: 425 psi 1125 psi 12 Washer ASTM A276 304
Size A B C D E F G H Wt./Lbs. 13 Washer Teflon
Seat: 80 psi Air 80 psi Air
1/2 4-1/4 3-1/2 2-3/8 1-3/8 7/16 4 x 5/8 3 5 4.5 14 Packing Teflon
3/4 4-5/8 3-7/8 2-3/4 1-11/16 7/16 4 x 5/8 3-1/8 5 5.5 15 Gasket Teflon
1 5 4-1/4 3-1/8 2 7/16 4 x 5/8 3-3/8 6-3/8 6.5 Fig. S16F6RT (Dimensions in Inches)
1-1/2 6-1/2 5 3-7/8 2-7/8 9/16 4 x 5/8 4-1/8 9 12.5 Size A B C D E F G H Port Wt./Lbs.
2 7 6 4-3/4 3-5/8 5/8 4 x 3/4 4-5/8 11 20 2 7 6 4-3/4 3-5/8 5/8 4-3/4 4-1/8 9 1-1/2 21
2-1/2 7-1/2 7 5-1/2 4-1/8 11/16 4 x 3/4 5-1/4 14 28 2-1/2 7-1/2 7 5-1/2 4-1/8 11/16 4-3/4 4-3/4 11 2 29
3 8 7-1/2 6 5 3/4 4 x 3/4 7-3/8 16 43 3 8 7-1/2 6 5 3/4 4-3/4 5-1/4 14 2-3/8 35
4 9 9 7-1/2 6-3/16 15/16 8 x 3/4 8-1/2 18 71 4 9 9 7-1/2 6-3/16 15/16 8-3/4 6-1/4 16 3 57
6 15-1/2 11 9-1/2 8-1/2 1 8 x 7/8 12-7/8 24 151 6 10-1/2 11 9-1/2 8-1/2 1 8-7/8 7-5/8 20 4-3/8 97
8 18 13-1/2 11-3/4 10-5/8 1-1/8 8 x 7/8 15-3/8 30 240 8 11-1/2 13-1/2 11-3/4 10-5/8 1-1/8 8-7/8 11 24 6 192
10 21 16 14-1/2 12-3/4 1-3/16 12 x 1 17-1/8 40 465 10 13 16 14-1/4 12-3/4 1-3/16 12-1 12-3/8 30 7-3/8 315
12 24 19 17 16-1/4 1-1/4 12 x 1 18-3/4 48 665 12 14 19 17 15 1-1/4 12-1 15-1/2 36 10 550
Fig. S37F6RT (Dimensions in Inches)
Size A B C D E F G H Wt./Lbs. Fig. S36F6RT (Dimensions in Inches)
1/2 5-1/2 3-3/4 2-5/8 1-3/8 9/16 4 x 5/8 3 5 8 Size A B C D E F G H Port Wt./Lbs.
3/4 6 4-5/8 3-1/4 1-11/16 5/8 4 x 3/4 3-1/8 5 10 2 8-1/2 6-1/2 5 3-5/8 7/8 8 x 3/4 4 9 1-1/2 30
1 6-1/2 4-7/8 3-1/2 2 11/16 4 x 3/4 3-3/8 6-3/8 13 2-1/2 9-1/2 7-1/2 5-7/8 4-1/8 1 8 x 7/8 4-3/4 11-7/8 2 48
1-1/2 7-1/2 6-1/8 4-1/2 2-7/8 13/16 4 x 7/8 4 9 26 3 11-1/8 8-1/4 6-5/8 5 1-1/8 8 x 7/8 4-7/8 14 2-3/8 60
2 8-1/2 6-1/2 5 3-5/8 7/8 8 x 3/4 5 11 33 4 12 10 7-7/8 6-3/16 1-1/4 8 x 7/8 5-7/8 16 3 95
2-1/2 9-1/2 7-1/2 5-7/8 4-1/8 1 8 x 7/8 5-1/4 14 53 6 15-7/8 12-1/2 10-5/8 8-1/2 1-7/16 12 x 7/8 7-1/4 21 4-3/8 172
3 11-1/8 8-1/4 6-5/8 5 1-1/8 8 x 7/8 6-5/8 16 75 8 16-1/2 15 13 10-5/8 1-5/8 12 x 1 12-1/2 24 6 324
4 12 10 7-7/8 6-3/16 1-1/4 8 x 7/8 7-7/8 18 120 10 18 17-1/2 15-1/4 12-3/4 1-7/8 16 x 1-1/8 13-7/8 24 7-3/8 465
6 15-7/8 12-1/2 10-5/8 8-1/2 1-7/16 12 x 7/8 13-5/8 24 260 12 19-3/4 20-1/2 17-3/4 15 2 16 x 1-1/4 15-1/2 30 10 800
8 19-3/4 15 13 10-5/8 1-5/8 12 x 1 15-5/8 30 470
10 22-3/8 17-1/2 15-1/4 12-3/4 1-7/8 16 x 1-1/8 20 40 690
12 25-1/2 20-1/2 17-3/4 15 2 16 x 1-1/4 21-5/8 48 970
WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0311-03 4/28/05 2:37 PM Page 1
313-05
WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0312-03 4/28/05 2:37 PM Page 1
314-05
WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0313-03 4/28/05 2:39 PM Page 1
315-05
Part Material
200 Lb. Stainless Steel Globe Valves 1 Body ASTM A 351 CF8M
Fig No. S202T6316 2 Bonnet ASTM A 351 CF8M
3 Disc ASTM A 182 F316
Rising Stem 4 Stern ASTM A 182 F316
Threaded Bonnet 5 Gland ASTM A 182 F316
6 Stem Nut ASTM A 182 F316
Integral Seats 7 Gland Nut ASTM A 351 CF8M
8 Stem Washer ASTM A 182 F316
Applicable Standards 9 Packing Collar ASTM A 182 F316
Threaded end is in 10 Packing Reinforced Teflon
accordance with 11 Gasket Reinforced Teflon
NPT spec ANSI B2.1 12 Handwheel ASTM A 126
150 PSI Steam 13 Handwheel Hex Nut ASTM A 276 GR. 304
200 WOG, Temp. 350°F 14 I.D Label Aluminum
WILLIAM E. WILLIAMS
VALVE CORPORATION
38-52 Review Ave., Long Island City, NY 11101
Tel: 718-392-1660 • Toll Free: 800-221-1115
Fax: 718-729-5106 • E-Mail: wew@williamsvalve.com • www.williamsvalve.com
0312-04 4/28/05 2:39 PM Page 1
316-05
1021-001 1023-001
100 psi @ 425°F 100 psi @ 425°F
Bolted Bonnet – Gland Packed Bolted Bonnet – Gland Packed
NI-CU Trim NI-CU Trim
NAVSEA 803-1385541 NAVSEA 803-1385541
DIMENSIONS – INCHES
SIZE A B C DIMENSIONS – INCHES
2-1/2 9 10-1/8 7 SIZE A B C
3 10 11-1/4 8 2-1/2 4-1/2 8-3/8 7
4 12-1/2 13-15/16 9 3 5 9-1/8 8
5 14-3/4 16-7/16 11 4 6 11-5/16 9
6 17 17-7/8 12 5 7-1/8 13-3/4 11
8 21-1/2 22-7/16 16 6 8 15-1/4 12
317-05
MARINE BRONZE GLOBE — SILBRAZED UNION ENDS MARINE BRONZE ANGLE — SILBRAZED UNION ENDS
161 SERIES 163 SERIES
200 psi SWP @ 425°F 200 psi SWP @ 425°F
400 psi WOG @ 150°F 400 psi WOG @ 150°F
Union Bonnet, Gland Packed Union Bonnet, Gland Packed
Renewable Disc & Seat Ring Renewable Disc and Seat Ring
Specify E.P.R. or Nitrile “O” Ring Specify E.P.R. or Nitrile “O” Ring
NAVSEA 803-4384536 – Type 1 NAVSEA 803-4384536 – Type 3
DIMENSIONS – INCHES DIMENSIONS – INCHES
SIZE A B C SIZE A B C
1/4 4 4-3/8 2 1/4 2 4-3/8 2
3/8 4-3/8 4-11/32 2-1/2 3/8 2-1/4 4-11/32 2-1/2
1/2 5-1/8 5-3/16 2-3/4 1/2 2-7/16 5-3/16 2-3/4
3/4 5-3/4 6-1/16 3 3/4 2-7/8 6-1/16 3
Optional Models: 1 6-3/8 6-7/8 3-1/2 Optional Models: 1 3-1/4 6-7/8 3-1/2
Soft Seat 161B 1-1/4 7-3/8 7-11/16 4 Soft Seat 163B 1-1/4 3-3/4 7-11/16 4
Stop Check 162A 1-1/2 8-1/4 8-3/8 4-3/4 Stop Check 164A 1-1/2 4-1/16 8-3/8 4-3/4
Needle 165A 2 9-5/8 10-7/16 5-1/4 Needle 168A 2 4-11/16 10-7/16 5-1/4
MARINE BRONZE SWING CHECK – SILBRAZED UNION MARINE BRONZE GATE – SILBRAZED UNION ENDS
ENDS 1146 SERIES
400 psi WOG @ 150°F
Non-rising Stem, Solid Wedge
Threaded Bonnet, Gland Packed
DIMENSIONS–INCHES
Specify E.P.R. or Nitrile “O” Ring
SIZE A B
DIMENSIONS–INCHES
1/4 4-7/16 1-9/16
SIZE A B C
3/8 5-1/8 1-3/4 1/4 3-5/8 3-15/16 2-1/8
1/2 5-3/4 1-3/4 3/8 4-1/4 3-15/16 2-1/8
5399 SERIES 3/4 6-9/16 2 1/2 4-7/8 4-3/8 2-3/4
400 psi WOG @ 150°F 1 7-1/4 2-7/16 3/4 5-1/2 4-3/4 2-3/4
Regrinding NI-CU Disc 1-1/4 8-5/16 2-7/8 1 6-1/16 5-1/8 3
Threaded Cap 1-1/2 9-1/8 3-1/4 1-1/4 7-1/16 6-1/16 3-3/4
Specify E.P.R. or Nitrile “O” Ring 2 10-13/32 3-15/16 1-1/2 7-5/8 6-3/4 4
NAVSEA 803-1385721 2 8-3/4 8 5
318-05
319-05
320-05
MILITARY SPECIFICATIONS
Conforms to: MSS SP-80.
570 (WW-V-51 for Type I, Class C,
Figure #570 End Connection 1, except with integral seat). Figure #600
MATERIAL LIST
200 lb. SWP-400 lb. WOG 200 lb. SWP-400 lb. WOG
NO. PART MATERIAL SPECIFICATION
Union Bonnet Threaded Bonnet
1 Body Bronze ASTM B 61
Bronze Disc & Seat 2 Bonnet Bronze ASTM B 61
Bronze Needle Point Disc
Threaded Ends 3 Disc Bronze ASTM B 61 Threaded Ends MATERIAL LIST
4 Stem Bronze ASTM B 61 NO. PART MATERIAL
Union Bonnet 1 Body Bronze
5 Bronze ASTM B 61
Nut 2 Bonnet Bronze
6 Packing Graphite Commercial 3 Stem Bronze
7 Gland Bronze ASTM B 16 4 Seat Ring (Pressed In) Commercial
8 Packing Nut Bronze Commercial 5 Packing Graphite
9 Handwheel Malleable Iron Commercial 6 Gland Commercial
Identification 7 Packing Nut Commercial
10 Aluminum Commercial
Plate 8 Handwheel Commercial
11 Handwheel Nut Bronze Commercial 9 Identification Plate Commercial
12 Disc Ring Bronze Commercial 10 Handwheel Nut Commercial
DIMENSIONS–INCHES DIMENSIONS–INCHES
SIZE A B C SIZE A B C
1/8 2-1/16 4 2 1/8 1-5/8 3-3/16 2
1/4 2-1/16 4 2 1/4 1-5/8 3-3/16 2
3/8 2-1/16 4-1/4 2 3/8 1-13/16 3-3/16 2
1/2 2-7/16 4-5/8 2-1/2 1/2 2-5/16 3-5/8 2
3/4 2-15/16 5-3/16 2-3/4 3/4 2-9/16 3-15/16 2-1/4
1 3-3/4 6-3/8 3-1/8
1-1/4 4-1/4 7 3-1/2
1-1/2 4-3/4 7-11/16 4
2 5-3/4 9 4-3/4
2-1/2 6-3/4 10-1/4 5-1/2
3 8 12 6
321-05
MILITARY SPECIFICATIONS
509 Conforms to: MSS SP-80.
Check Valve Figure 509 Check Valve Figure 515 & (WW-V-51 for Type IV, Class A,
125 lb. SWP / 200 lb. WOG 150 lb. SWP / 300 lb. WOG 515 End Connection 1).
Horizontal Swing Type Horizontal Swing Type MATERIAL LIST
Bronze Disc / Threaded Ends NO. PART MATERIAL SPECIFICATION
Bronze Disc / Threaded Ends
1 Body Bronze ASTM B 62
2 Cap Bronze ASTM B 62
Commercial
St. Steel
3 Lever 1/4" to 2" Incl.
ASTM B 62
Bronze
2-1/2" and 3"
ASTM B 16
4 Disc Bronze 1/4" to 3/4" Incl.
ASTM B 62
1" to 3" Incl.
5 Pin Bronze ASTM B 16
6 Plug (not shown) Bronze ASTM B 16
71 Washer Bronze Commercial
81 Disc Nut Bronze Commercial
9 Retaining Ring St. Steel Commercial
1
Used on 2-1/2" and 3" sizes only
DIMENSIONS–INCHES
SIZE A B
1/4 2-1/8 1-7/16
3/8 2-1/8 1-7/16
1/2 2-5/16 1-7/16
3/4 2-5/8 1-11/16
1 3-1/4 2
1-1/4 3-9/16 2-1/8
1-1/2 4 2-3/8
2 4-3/4 2-13/16
2-1/2 6 3-5/8
3 6-7/8 4-3/16
322-05
MATERIAL LIST
No. Description Material
1 Body Cast Iron
2 Seat Bronze MATERIAL LIST
3 Plug Bronze NO. DESCRIPTION MATERIAL & SPECIFICATION
4 Spring Stainless Steel 1 Bolt Steel
5 Bushing Bronze 2 Identification Plate Aluminum
6 Screw Stainless Steel Cast Iron ASTM A 126,
3 Bonnet
Flange Dimensions Class B
Conform to ANSI
Standards 4 Body Gasket Graphite Non-Asb. Fibers
ANSI CLASS 125 ANSI CLASS 250 5 Nut Steel
Model Weight Model Weight 6 Side Plug Brass ASTM B 16
Size No. Lbs. A B Size No. Lbs. A B 7 Hanger Pin Brass ASTM B 16
2-1/2 1825 24 5-1/2 1 2-1/2 1875 30 5-1/2 1 Cast Iron ASTM A 126,
3 1803 29 6 1-3/8 3 1853 36 6 1-3/8 8 Hanger
Class B
4 1804 42 7-1/4 1-3/4 4 1854 59 7-1/4 1-3/4 9 Disc Nut Brass ASTM B 16
5 1805 52 8-1/2 2 5 1855 78 8-1/2 2
101 Disc Cast Bronze ASTM B 62
6 1806 73 9-3/4 2-1/2 6 1856 103 9-3/4 2-1/2
11 Seat Ring Cast Bronze ASTM B 62
8 1808 126 12-1/2 3-1/4 8 1858 179 12-1/2 3-1/4
Cast Iron ASTM A 126,
10 1810 205 15-1/2 4-1/4 10 1860 253 15-1/2 4-1/4 12 Body
Class B
12 1812 306 14-1/4 NA 12 1862 401 14-1/4 NA 1
Sizes 5" through 12" have cast iron with bronze disc face
14 1814 380 15-3/4 NA 14 1864 511 15-3/4 NA
rings
16 1816 501 17-5/8 NA 16 1866 697 17-5/8 NA
18 1868 959 18-3/4 NA
DIMENSIONS–INCHES
18 1818 724 18-3/4 NA
20 1820 890 20-5/8 NA 20 1870 1180 20-5/8 NA VALVE SIZE
24 1824 1220 24 NA 24 1874 1680 24 NA DIM. 2 2-1/2 3 4 5 6 8 10 12
30 1830 2000 29-1/4 NA 30 1880 2375 29-1/4 NA A 8 8-1/2 9-1/2 11-1/2 13 14 19-1/2 24-1/2 27-1/2
36 1836 4421 45 NA 36 1886 5511 45 NA B 4-9/16 5-3/8 5-9/16 6-11/16 7-3/4 9-1/2 10-3/8 12 13-1/2
42 1842 7203 50 NA 42 1892 8663 50 NA C 6 7 7-1/2 9 10 11 13-1/2 16 19
D 3/4 11/16 3/4 15/16 15/16 1 1-1/8 1-3/16 1-1/4
NOTE: Valve sizes 3" thru 10" will mate up to wafer style butterfly valve without the
use of spool pieces or other adapters. (See “B” dimension for allowable clearance.)
323-05
324-05
1/4" 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"
UNITS UNITS
DN6 DN10 DN15 DN20 DN25 DN32 DN40 DN50 DN15 DN20 DN25 DN32 DN40 DN50
A(Dia) INCHES 0.50 0.50 0.50 0.75 1.00 1.25 1.50 2.00 A(Dia) INCHES 0.5 0.75 1 1.25 1.5 2
mm 13 13 13 19 25 32 38 51 mm 13 19 25 32 38 51
B INCHES 1.96 1.96 2.80 3.44 3.87 4.75 5.25 6.10
B INCHES 2.80 3.44 3.87 4.75 5.25 6.10
mm 50 50 71 87 98 121 133 155 mm 352 354 356 376 382 391
H INCHES 1.95 1.95 1.95 2.26 2.44 2.80 3.12 3.58
H INCHES 1.95 2.26 2.44 2.8 3.12 3.58
mm 50 50 50 57 62 71 79 91 mm 50 57 62 71 79 91
L INCHES 3.88 3.88 3.88 4.75 4.75 6.50 7.38 7.38
L INCHES 3.88 4.75 4.75 6.5 7.38 7.38
mm 99 99 99 121 121 165 187 187 mm 99 121 121 165 187 187
W INCHES 1.91 1.91 1.91 2.19 2.46 2.98 3.00 4.00
W INCHES 1.91 2.19 2.46 2.98 2.98 4
mm 49 49 49 56 62 76 76 102 mm 49 56 62 76 76 102
F THREAD 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” Cv 17 31 60 110 185 360
SIZE NPT NPT NPT NPT NPT NPT NPT NPT
Cv 7 7 17 31 60 110 185 360
325-05
Approved by
U.S. Coast Guard
for use in Category A
service as described in
Title 46 Code of Federal
Regulations 46.20-15.
326-05
MOUNTING
(2-1/2” - 8”)
MOUNTING
(10” - 24”)
300 CLASS Dimensions Mounting Flange Stem Connection Weight (lbs) Flange Data
Valve A B C D E F G H S K L Bare Stem J
Size Height Height Stem Lg. Stem Dia. Face Width Width Fastener Square Key Length Wafer Lug Qty Fastener
2-1/2* 5.59 9.46 1.63 0.625 1.750 2.30 2.30 1/4- 20 0.46 0.88 10 15 8 3/4- 10
3 5.59 9.46 1.63 0.625 1.875 2.30 2.30 1/4- 20 0.46 0.88 11 20 8 3/4- 10
4 6.25 11.00 1.63 0.625 2.125 2.30 2.30 1/4- 20 0.46 0.88 16 23 8 3/4- 10
5* 7.69 13.50 1.69 0.875 2.125 3.00 3.00 3/8- 16 0.64 1.00 26 30 8 3/4- 10
6 7.69 14.50 1.69 0.875 2.310 3.00 3.00 3/8- 16 0.64 1.00 31 43 12 3/4- 10
8 9.51 17.32 1.86 1.125 2.875 3.36 3.36 1/2- 13 0.250 1.50 50 80 12 7/8- 9
10 10.81 19.81 5.50 1.375 3.252 3.88 1.38 1/2- 13 0.312 1.50 95 150 16 1- 8
12 11.62 22.62 5.50 1.500 3.625 3.88 2.00 1/2- 13 0.375 1.50 152 200 16 1-1/8- 8
14 13.50 26.75 5.50 2.000 4.625 5.75 2.50 1/2- 13 0.500 1.50 210 320 20 1-1/8- 8
16 15.00 29.75 5.50 2.250 5.250 5.75 2.50 1/2- 13 0.500 1.50 260 420 20 1-1/4- 8
*Lug only
HOW TO ORDER HP SERIES HIGH PERFORMANCE BUTTERFLY VALVES
ANSI Body Body Disc Stem Seat Stem
Series Class Style Material Material Material Material Packing Operator Ext. Options Size
XX X X X X X X X X XX XXX
HP 1-150 L-Lug C-WCB S-CF8M 4-17-4-SS 1-PTFE 1-PTFE 1-Bare Stem A-Assemble Dry 020-240
3-300 W-Wafer S-CF8M 3-316 SS 2-RPTFE G-Graphite 2-Lever O-Oxygen Clean
4-UHMWPE 3-Gear OP
4-Elect
5-Pneumatic
Part Number Example: HP1LCS4111 040 = 4 inch, high performance, class 150, lug pattern, carbon steel body, 17-4 stem, PTFE seat, PTFE packing, bare stem with no ext options
327-05
Distance
Between Flange Diameter Handle Weight
Flanges (L) Height Length
Size Bore Bronze FS BST BST BST H C Bronze Forged
"H" "K" "S" Steel
A.B. 18 5/16 4 5-1/2 4-1/2 4-1/2 5 5-3/8 4-1/4 – –
A.B. 22 3/8 4-1/2 5-1/2 4-1/2 4-1/2 5 – 5-1/4 8-3/4 9-1/2
A.B. 28 1/2 4-1/2 5-1/2 4-1/2 4-1/2 5 6 7 10 12
A.B. 32 5/8 – 6 One 4-3/4 dia. & 6-3/4 7 – 12-1/2
one oval
A.B. 40 3/4 5-1/2 *6 4-1/2 4-1/2 5 7 9 14-1/2 17
A.B. 50 1 6 *7 4-3/4 5 5-1/2 7-3/4 9-1/2 19 28
A.B. 50 1-1/4 6 *7 or 10 5-1/4 5-1/4 5-3/4 7-3/4 9-1/2 24-3/4 34-1/ 2
Dimensions in inches; weight in pounds.
* With BST "S" Flanges overall lengths for A.B. 40 and A.B. 50 are 6-1/4 and 7-1/4, respectively.
Note: Cocks can also be supplied with A.S.A. flanges.
Forged steel cocks are fitted with stainless steel plugs and tightening nuts. Section elevation of T.VIII Type T.VIII Double Plate
Bronze cocks are fitted with bronze plugs, unless otherwise specified. Type Gauge with Illuminator Water Level Gauge
328-05
L120 Electric Actuators provide positive, dependable valve actuation. Whether used with gate and
globe valves, penstocks, or sluice gates, these actuators operate without modification in any rising or
non-rising stem application for linear-action valves. When combined with a quarter-turn gear
operator, they can also be used to control butterfly, ball, and plug valves.
L120 Series Performance (3-phase-50Hz / 380, 400, and 415 Volt – 60Hz / 230, 450, and 575 Volt)
Maximum Torque Capacity Maximum Thrust Capacity Output Speed Range (RPM)
Unit Ft.-Lbs. NM Lbs. Kg 60Hz 50Hz
L120-10 100 136 10,000 4,500 12-250 10-210
L120-20 200 272 20,000 9,000 12-250 10-210
L120-40 400 544 30,000 13,500 24-250 20-210
L120-85 850 1,156 45,000 20,250 24-192 20-160
L120-190 1,900 2,584 75,000 33,750 24-196 20-160
L120-420 4,200 5,712 140,000 63,000 19-196 16-165
L120-800 8,000 10,880 250,000 112,500 12-168 10-140
L120-2000 20,000 27,200 500,000 225,000 12-60 10-50
329-05
Note: Double Acting – Pressure at port “CW” will result in clockwise rotation. Pressure at port “CCW” will result in counter-clockwise rotation.
Note: Spring Return – Pressure at port “CCW” will result in counterclockwise rotation. Springs provide clockwise rotation upon loss of pressure.
When ordering please specify: • Supply Air Pressure • Control Signal (For Modulating Valves)
• Valve Type (Ball, Butterfly) & Manufacturer • Fail Position (Valve open or closed) • Solenoid Control Voltage (For Open/Close Valves)
• Operating Conditions (Pressure, Temp. & Media) • Operation (Open/Close, Modulating) • Feedback Requirements
330-05
Features:
• Wide range of pressure ratings, sizes, and
resilient materials provide long service life
and low internal leakage.
• High Flow Valves for liquid, corrosive, and
air/inert gas service.
331-05
8320 Three way valves have three pipe connections and two
1/4” NPT orifices. When one orifice is open, the other is closed,
and vice versa. They are commonly used to alternately
apply pressure to and exhaust pressure from a valve
Valve Parts in Contact with Fluids actuator or a single-acting cylinder.
Body Brass 303 Stainless Steel
Three Types of Operations Apply:
Seals and Discs NBR or Cast UR, as Listed
Normally Closed (NC)
Core Tube 305 Stainless Steel
Core and Plugnut 430F Stainless Steel
When the valve is de-energized, the pressure port is
closed and the exhaust port is connected to the cylinder
Core Springs 302 Stainless Steel port. When the valve is energized, the exhaust port is
Shading Coil Copper Silver closed and the pressure port is connected to the cylinder
Disc-Holder CA port.
Core Guide CA (10.1 and 17.1 Watt only) Normally Open (NO)
When Ordering, Specify: When the valve is de-energized, the pressure port is con-
• Operation: NO, NC, Universal nected to the cylinder port and the exhaust port is closed.
When the valve is energized, the pressure port is closed
• Pipe size or flow requirement
and the cylinder port is connected to the exhaust port.
• Material (brass or stainless steel)
• Fluid to be controlled Universal (Univ)
• Maximum operating pressure This allows the valve to be connected in either the
• Voltage & frequency Normally Closed or Normally Open position ... or to select
• Extras (special seats, seals, brackets, etc.) one of two fluids or to divert flow from one port to another.
332-05
RELIEF VALVES FOR WATER POP SAFETY VALVES POP SAFETY VALVES RELIEF VALVES FOR OIL,
OR NON-FLAMMABLE LIQUIDS FOR GAS FOR STEAM BOILERS GASOLINE AND OTHER LIQUIDS
Fig. 48209960010 – Relief Valve Bronze, Nickel Alloy Seat With Lifting Levers Fig. 48206580015 – Relief Valve
Male Inlet Side Outlet, Male Inlet Side Outlet Top Outlet Bronze, Male Inlet, 3/8" to 3"
Rough Bronze, Side Outlet 1 to 250 lbs. Fig. 48206290013 Fig. 48204330014 Fig. 48202860016 – Relief Valve
Iron Regulating Wheel Bronze, Encased Spring
Fig. 482010450011 – 1/2" to 3" Bronze, Female Inlet, 3/8" to 2"
1 to 250 lbs. 1 to 250 lbs.
Fig. 482012130012 – 3/8" to 2" 1 to 250 lbs.
3/8" to 2" 450° F.-3/8" to 3"
Fig. 48205890026
Bronze Automatic
Liquid Gauge
200 lb. – 500° F
1/2" x 5/8"
3/4" x 3/4"
333-05
SAFETY/RELIEF VALVE HIGH PRESSURE SAFETY/RELIEF VALVE BRONZE UNION END RELIEF VALVE
FIG 910 – STEEL FIG 264 – STEEL MAX PRESSURE 3000 PSIG
FIG 911 – STAINLESS FIG 266 – STAINLESS SIZES 1/4"TO 2"
MAX PRESSURE 900 PSIG MAX PRESSURE 3300 PSIG THREADED ENDS
SIZES 1/2" TO 2" SIZES 1/2" TO 1" SUITABLE FOR LIQUID MIL-V-24332
THREADED ENDS THREADED ENDS AIR MIL-V-22541
SUITABLE FOR LIQUID, AIR OR STEAM SUITABLE FOR LIQUID, AIR OR STEAM STEAM MIL-V-20065
LIFT LEVER REQ’D FOR AIR/STEAM LIFT LEVER REQ’D FOR AIR/STEAM *SPECIFY: SET PRESSURE
*SPECIFY: SET PRESSURE *SPECIFY: SET PRESSURE SERVICE (LIQ, AIR, STM)
SERVICE (LIQ, AIR, STM) SERVICE (LIQ, AIR, STM)
MARINE FITTINGS
& FLANGES
Valve automation
W & O SUPPLY MARINE VALVES
- Gate, Globe, Angle, Check
- All Materials, Incl. Metrics P.O. Box 3907 • Jacksonville, FL 32206 - Hose Valves
& controls
MARINE PIPE & TUBING Tel: 800-962-9696 • 904-354-3800 - Strainers & Steam Traps
- All Materials & Schedules Fax: 904-355-5542 • www.wosupply.com - Regulators, Relief & Safety
- Condenser Tubes jacksonville.fl@wosupply.com - Metrics
0328 5/12/05 1:18 PM Page 326
334-05
STACEY/FETTEROLF CORP.
SPECTACLE LINE BLIND VALVES
No. 601-AJ
STACEY ®
www.fetterolfvalves.com Special Trim Available
for Maritime Service
FETTEROLF CORPORATION A SchuF Corporation
P.O. Box 103, Skippack, PA 19474 • Tel: (610) 584-1500 • Fax: (610) 584-5904 • Email: info@fetterolfvalves.com
0329-04 5/12/05 1:20 PM Page 327
335-05
FETTEROLF CORPORATION
CAM-SET LINE BLINDS
APPLICATIONS FEATURES
Positive pipeline close-off is vital in many piping systems to assure Low initial cost, one-man operation and positive spectacle plate
safety of personnel working on down-stream equipment, partic- close-off is a unique approach to line blinding. It provides the
ularly when flammable or toxic liquids or gases could seep past best approach to absolute line shut-off on product lines in
a closure. When visible proof of shut-off is necessary, a line blind refineries, chemical and petrochemical plants where positive line
is mandatory to comply with plant safety regulations. Standard blinding is essential to safety and to prevent product
valve types do not qualify for this service since the enclosed body contamination.
defeats the visual inspection needed to be certain that the line 1. Only one cam to turn to open or close.
is blocked. 2. Positive shut-off.
Line blinding can be accomplished by manually separating a pair 3. No spreading of pipe required.
of bolted flanges and inserting a gasketed solid steel plate between 4. Seal unaffected by piping misalignment.
them. Line blind valves accomplish the same purposes more 5. Simple, one-man, spectacle changing from one side
easily since they have self-contained seals and can be opened of the line—no climbing over or reaching.
or closed in a matter of minutes. Line blind valves also reduce 6. 316 SST spectacle standard, or other materials
product loss and provide cleaner, safer operation. readily available.
FETTEROLF
CORPORATION A SchuF Corporation www.fetterolfvalves.com
P.O. Box 103, Skippack, PA 19474 • Tel: (610) 584-1500 • Fax: (610) 584-5904 • Email: info@fetterolfvalves.com
0330-04 5/3/05 8:39 AM Page 389
336-05
The products above and below this line are not available from the same manufacturing source.
FLORIDA MARINE PRODUCTS, INC.
INTERNATIONAL SHORE CONNECTION / MARPOL FLANGE
Standard Dimensions of Flanges for Discharge Connections
Outside diameter 215mm
Inner diameter According to pipe outside diameter. (SPECIFY SIZE)
Bolt circle 183mm
Slots in flange 6 holes 22mm in diameter equidistantly placed on a bolt
circle of the above diameter, slotted to the flange
periphery. Slot width to be 22mm.
Flange Thickness 20mm
Bolts and nuts 6 each of 20mm diameter and of suitable length.
(NOT INCLUDED)
The flange is designed to accept pipes of up to 125mm internal diameter and is constructed
of steel or other equivalent material having a flat face. This flange, together with a gasket of
oilproof material, (NOT INCLUDED) shall be suitable for a service pressure of 6kg/cm2.
337-05
VCO-2310 1 Rod 8.25 4.19 5.56 2.25 1.00 1.50 1.19 1 (8) 4.44 34 B
VCO-2320 1 Rod 8.25 4.19 5.56 2.25 1.00 1.50 1.19 1 (8) 4.44 42
VCO-2400 1-1/4 Rod 8.69 5.12 6.12 2.75 1.25 1.88 1.38 1-1/8 (7) 5.00 17
VCO-2410 1-1/4 Rod 8.69 5.12 6.12 2.75 1.25 1.88 1.38 1-1/8 (7) 5.00 42 F
E
All dimensions in inches
C
338-05
F
H For rising stem valves
See Pilot
Assembly G F Type To Fit Rod A B C D E F G H J
Hole Drill
Note through G Valve Diam. (Taper
Hand- Pin)
and Taper wheel
Ream for Size
“J” Taper
Pin VCM-2000 SERIES - Male
VCM-2100 3 - 5 5/8 5-7/8 4-3/4 2-3/8 1/4 5 5/8 15/16 - -
A
VCM-2200 6 - 9 3/4 8-1/4 5-1/2 3 1/4 7-3/8 3/4 1-1/8 - -
G EA
VCM-2300 10 - 12 1 12-1/4 7 3-7/8 1/4 11-3/8 1 1-1/2 - -
VCM-2400 14 - 27 1-1/4 18-1/4 8-3/4 4-7/8 5/16 17-1/4 1-1/4 1-7/8 - -
D VCF-2000 SERIES - Female
00 x
VCF-2100 3-5 5/8 6 4-3/4 2-3/8 1/4 5 5/8 15/16 .94
C C 15/16
B VCF-2200 6-9 3/4 8-1/2 5-1/2 3 1/4 7-3/8 3/4 1-1/8 1.12 0 x 1-1/8
B
VCF-2300 10 - 12 1 12-1/2 7 3-7/8 1/4 11-3/8 1 1-1/2 1.50 4 x 1-1/2
TYPE VCM-2000 TYPE VCF-2000
VCF-2400 14 - 27 1-1/4 18-5/8 8-3/4 4-7/8 5/16 17-1/4 1-1/4 1-7/8 2.00 5x2
A
E
(Travel)
339-05
Pilot Hole
See Drill Through and
Assembly Taper Ream For
Note “J” Taper Pin For rising stem valves
To Fit
Valve J
Type Hand- Rod A B C D E F G H (Taper K
wheel Diam. Pin)
Size
VCDM-2000 SERIES – Male
VCDM-2100 3-5 5/8 7-3/4 4-3/4 2-3/8 1/4 5 5/8 15/16 - - 4.25
VCDM-2200 6-9 3/4 10-3/16 5-1/2 3 1/4 7-3/8 3/4 1-1/8 - - 5.00
VCDM-2300 10 - 12 1 14-3/16 7 3-7/8 1/4 11-3/8 1 1-1/2 - - 5.50
VCDM-2400 14 - 27 1-1/4 20-3/4 8-3/4 4-7/8 5/16 17-1/4 1-1/4 1-7/8 - - 6.00
VCDF-2000 SERIES – Female
00 x
VCDF-2100 3-5 5/8 7-1/4 4-3/4 2-3/8 1/4 5 5/8 15/16 .94 4.25
15/16
VCDF-2200 6-9 3/4 9-3/4 5-1/2 3 1/4 7-3/8 3/4 1-1/8 1.12 0 x 1-1/8 5.00
VCDF-2300 10 - 12 1 13-3/4 7 3-7/8 1/4 11-3/8 1 1-1/2 1.50 4 x 1-1/2 5.50
VCDF-2400 14 - 27 1-1/4 20-1/4 8-3/4 4-7/8 5/16 17-1/4 1-1/4 1-7/8 2.00 5x2 6.00
Type VCDF-2000
Type VCDM-2000
Pilot Hole
Drill Through and
For rising handwheel valves (telescopes on closing)
Taper Ream For To Fit
“J” Taper Pin Valve J
See Rod
Type Hand- A B C D E F G H (Taper K
Assembly
wheel Diam. Pin)
Note
Size
VCDM-3000 SERIES – Male
VCDM-3100 3-5 5/8 5-7/8 3-1/4 1-1/4 3/16 1-1/2 5/8 15/16 - - 4.25
VCDM-3200 6-9 3/4 7-7/16 4-1/4 1-5/8 3/16 2-3/4 3/4 1-1/8 - - 5.00
VCDM-3300 10 - 12 1 9-5/16 6-1/2 2 1/4 4-1/4 1 1-1/2 - - 5.50
VCDM-3400 14 - 27 1-1/4 12-5/16 8 2-3/8 5/16 6 1-1/4 1-7/8 - - 6.00
VCDF-3000SERIES – Female
00 x
VCDF-3100 3-5 5/8 5-3/8 3-1/4 1-1/4 3/16 1-1/2 5/8 15/16 .94 4.25
15/16
VCDF-3200 6-9 3/4 7 4-1/4 1-5/8 3/16 2-3/4 3/4 1-1/8 1.12 0 x 1-1/8 5.00
Type VCDM-3000 Type VCDF-3000 VCDF-3300 10 - 12 1 8-7/8 6-1/2 2 1/4 4-1/4 1 1-1/2 1.50 4 x 1-1/2 5.50
VCDF-3400 14 - 27 1-1/4 11-7/8 8 2-3/8 5/16 6 1-1/4 1-7/8 2.00 5x2 6.00
340-05
Woodruff
Key* For rising stem valves
Shaft
Type Core A B C D E F G H
Diam.
VC-2000 SERIES – Without quick disconnect flexible shaft controls
VC-2100 1/2 5-7/8 4-3/8 2-1/8 3/16 3-15/16 - .818 3/8
VC-2200 3/4 7-1/8 4-3/4 2-3/8 1/4 5 - 1.286 9/16
VC-2300 1 9-1/2 5-1/2 3 1/4 7-3/8 - 1.255 3/4
VC-2400 1-1/4 13-1/2 7 3-7/8 1/4 11-3/8 - 1.255 1
VC-2500 1-5/8 20-1/16 8-3/4 4-7/8 5/16 17-1/4 - 1.875 1-1/8
VCD-2000 SERIES – With quick disconnect flexible shaft controls
VCD-2100 1/2 7-1/4 4-3/8 2-1/8 3/16 3-15/16 3.50 .818 3/8
VCD-2200 3/4 9 4-3/4 2-3/8 1/4 5 4.25 1.286 9/16
VCD-2300 1 11-3/8 5-1/2 3 1/4 7-3/8 5.00 1.255 3/4
VCD-2400 1-1/4 15-3/8 7 3-7/8 1/4 11-3/8 5.50 1.255 1
VCD-2500 1-5/8 22-1/2 8-3/4 4-7/8 5/16 17-1/4 6.00 1.875 1-1/8
341-05
A B C D E F
Steel Stainless Bronze
O.D. Bore Bore Lg. Min. Lg.
VCU-1430 VCU-1530 VCU-1630 1.00 .50 .50 4.874 1.06 1.687
VCU-1435 VCU-1535 VCU-1635 1.12 .62 .62 4.625 .88 1.500
VCU-1440 VCU-1540 VCU-1640 1.25 .50 .50 5.625 1.12 1.875
VCU-1441 VCU-1541 VCU-1641 1.25 .62 .62 5.625 1.12 1.875
VCU-1442 VCU-1542 VCU-1642 1.25 .75 .75 5.625 1.12 1.875
VCU-1443 VCU-1543 VCU-1643 1.25 .75 .62 5.625 1.12 1.875
VCU-1444 VCU-1544 VCU-1644 1.25 .75 .50 5.625 1.12 1.875
VCU-1445 VCU-1545 VCU-1645 1.50 .88 .88 6.812 1.38 2.250
VCU-1450 VCU-1550 VCU-1650 1.75 .75 .75 8.000 1.50 2.625
VCU-1451 VCU-1551 VCU-1651 1.75 1.00 1.00 8.000 1.50 2.625
VCU-1452 VCU-1552 VCU-1652 1.75 1.25 1.25 8.000 1.50 2.625
VCU-1453 VCU-1553 VCU-1653 1.75 1.25 1.00 8.000 1.50 2.625
Double VCU-1454 VCU-1554 VCU-1654 1.75 1.00 .75 8.000 1.50 2.625
VCU-1455 VCU-1555 VCU-1655 2.00 1.25 1.25 9.187 1.59 3.000
VCU-1460 VCU-1560 VCU-1660 2.50 1.25 1.25 11.062 2.38 3.500
VCU-1461 VCU-1561 VCU-1661 2.50 1.50 1.50 11.062 2.38 3.500
VCU-1470 VCU-1570 VCU-1670 3.00 1.75 1.75 13.812 2.75 4.500
342-05
343-05
SHAFT HANGERS
Size Part No. A B C D E F G H J Holes
1/2 VCH-1100 .505” 3-1/8” 1-1/4” 3/8” 2-5/8” 9/16” 1-3/8” 1-11/32” 1/2”
5/8 VCH-1101 .630” 3-3/4” 1-1/2” 3/8” 3-1/4” 9/16” 1-1/2” 1-9/16” 1/2”
3/4 VCH-1200 .755” 3-3/4” 1-1/2” 3/8” 3-1/4” 9/16” 1-1/2” 1-9/16” 1/2”
1 VCH-1300 1.005” 4” 1-3/4” 3/8” 3-3/4” 11/16” 1-1/2” 1-13/16” 11/16”
1-1/4 VCH-1400 1.255” 4” 1-5/8” 3/8” 4-1/4” 13/16” 1-1/2” 1-13/16” 11/16”
1-1/2 VCH-1500 1.505” 4-1/8” 1-7/8” 1/2” 4-1/2” 1-3/8” 1-1/2” 1-13/16” 11/16”
1-3/4 VCH-1600 1.755” 4-1/8” 1-7/8” 1/2” 4-3/4” 1-11/16” 1-1/2” 1-13/16” 11/16”
2 VCH-1700 2.005” 5-1/2” 2-5/8” 1/2” 6-1/4” 2” 2” 2-9/16” 11/16”
G Holes
Size Part No. A B C D E F G Holes H Approx. Wt.
1/2 VCB-2100 .53” 1-3/8” 1” 1-3/16” 3/8” 1-3/8” 5/16” 2-3/4” 1/2 lb.
3/4 VCB-2200 .78” 1-3/8” 1” 1-3/16” 3/8” 1-3/8” 5/16” 2-3/4” 3/4 lb.
1 VCB-2300 1.6” 2-1/8” 1-1/2” 1-7/8” 1/2” 1-15/16” 7/16” 4” 1-3/4 lbs.
1-1/4 VCB-2400 1.31” 2-1/8” 1-1/2” 1-7/8” 1/2” 1-15/16” 7/16” 4” 2 lbs.
1-1/2 VCB-2500 1.53” 2-1/4” 1-11/16” 2-1/4” 5/8” 2-13/16” 9/16” 4-5/16” 2-1/4 lbs.
344-05
STEEL COUPLINGS
The weld type coupling is used to join rigid rods by welding. They are
slotted on the ends to allow for increased effective weld area, which
translates into higher torsional strength.
The pin type coupling is similar to the weld coupling but is joined with
the use of pins, providing an easily disassembled joint for easy
maintenance. Weld Type
Pin Type Weld Type Dimensions
Type
Part No. Approx. Wt. Part No. Approx. Wt. A B
1/2” Rod VCC-1100 .82 lbs. VCC-2100 .53 lbs. 1/2” 1”
3/4” Rod VCC-1200 1.87 lbs. VCC-2200 .92 lbs. 3/4” 1-1/4”
1” Rod VCC-1300 2.30 lbs. VCC-2300 1.55 lbs. 1” 1-5/8”
1-1/4” Rod VCC-1400 2.70 lbs. VCC-2400 1.83 lbs. 1-1/4” 1-7/8”
1-1/2” Rod VCC-1500 3.75 lbs. VCC-2500 2.20 lbs. 1-1/2” 2-3/8”
1-3/4” Rod VCC-1600 4.94 lbs. VCC-2600 3.29 lbs. 1-3/4” 2-3/4”
2” Rod VCC-1700 5.55 lbs. VCC-2700 3.81 lbs. 2” 3”
Pin Type
EXPANSION
COUPLINGS
Construction
Expansion coupling Bronze
Shaft Steel
Pins Steel
Keys Steel
Lube connection 90° angle - Zerk VCE-3000
VCE-4000
Part No. A B C D E F G
VCE-3100 1/2” 1” 5-3/4” 2-1/2” 6-1/4” 1” 3/4”
VCE-3200 3/4” 1-1/4” 5-3/4” 2-1/2” 6-1/4” 1” 3/4” SLIP COUPLINGS
VCE-3300 1” 1-3/4” 5-3/4” 2-1/2” 6-1/4” 1” 3/4” Shaft and coupling made of cold rolled steel
VCE-3400 1-1/4” 2” 5-3/4” 2-1/2” 6-1/4” 1” 3/4”
VCE-3500 1-1/2” 2-1/2” 5-3/4” 2-1/2” 6-1/4 1” 3/4”
VCE-4100 1/2” 1” 5-3/4” 5” 1-1/4” 3/4” 1”
VCE-4200 3/4” 1-1/4” 5-3/4” 5” 1-1/4” 3/4” 1”
VCE-4300 1” 1-3/4” 5-3/4” 5” 1-1/4” 3/4” 1”
VCE-4400 1-1/4” 2” 5-3/4” 5” 1-1/4” 3/4” 1”
VCE-4500 1-1/2” 2-1/2” 5-3/4” 5” 1-1/4” 3/4” 1”
VCE-5100 1/2” 1” 10-1/4” 8-1/4” 3-1/2” 1-1/4” – VCE-5000
VCE-5200 3/4” 1-1/4” 12” 8-1/4” 4” 2” –
VCE-5300 1” 1-3/4” 15-1/2” 11-1/4” 5” 2-1/2” –
VCE-5400 1-1/4” 2” 18-1/4” 12-1/4” 5-1/2” 3” –
VCE-5500 1-1/2” 2-1/2” 18-1/4” 13” 5-1/2” 3” –
VCE-6100 1/2” 1” 7” 12” 2-1/2” 1-1/4” 1-1/4”
VCE-6200 3/4” 1-1/4” 7” 16” 4-1/2” 2” 2”
VCE-6300 1” 1-3/4” 8” 17” 4-1/2” 2-1/2” 2-1/2”
VCE-6400 1-1/4” 2” 9” 18” 4-1/2” 3” 3”
VCE-6500 1-1/2” 2-1/2” 9” 18” 4-1/2” 3” 3” VCE-6000
345-05
VALVE HANDWHEELS
Specify commercial or Navship specs
A B C
Aluminum Bronze Steel Dia. Sq. Ref.
VCW-1030 VCW-2030 VCW-3030 3” 9/32” 7/16”
VCW-1031 VCW-2031 VCW-3031 3” 5/16” 7/16”
VCW-1040 VCW-2040 VCW-3040 4” 5/16” 1/2”
VCW-1041 VCW-2041 VCW-3041 4” 3/8” 1/2”
VCW-1050 VCW-2050 VCW-3050 5” 3/8” 5/8”
VCW-1051 VCW-2051 — 5” 1/2” 5/8”
VCW-1052 VCW-2052 — 5” 3/4” 5/8”
VCW-1060 VCW-2060 VCW-3060 6” 7/16” 11/16”
VCW-1061 VCW-2061 VCW-3061 6” 1/2” 11/16”
VCW-1062 VCW-2062 VCW-3062 6” 9/16” 11/16”
VCW-1063 VCW-2063 VCW-3063 6” 5/8” 11/16”
VCW-1064 VCW-2064 VCW-3064 6” 3/4” 11/16”
VCW-1070 VCW-2070 VCW-3070 7” 9/16” 3/4”
VCW-1071 VCW-2071 VCW-3071 7” 5/8” 3/4”
VCW-1072 VCW-2072 — 5” 3/4” 3/4”
VCW-1080 VCW-2080 VCW-3080 8” 9/16” 7/8”
VCW-1081 VCW-2081 VCW-3081 8” 5/8” 7/8”
VCW-1082 VCW-2082 VCW-3082 8” 3/4” 7/8”
VCW-1090 VCW-2090 VCW-3090 9” 9/16” 15/16”
VCW-1091 VCW-2091 VCW-3091 9” 5/8” 15/16”
VCW-1092 VCW-2092 — 9” 11/16” 15/16”
VCW-1093
VCW-1094
VCW-2093
VCW-2094
VCW-3093
VCW-3094
9”
9”
3/4” 15/16”
7/8” 15/16”
HANDWHEEL-TO-SOLID ROD ADAPTERS
VCW-1100 VCW-2100 — 10” 9/16” 1”
Part No. A B C D E F
VCW-1101 VCW-2101 — 10” 5/8” 1”
Steel Stainless Dia. Sq. Dia. Thread
VCW-1102 VCW-2102 — 10” 11/16” 1”
VCW-1103 VCW-2103 VCW-3103 10” 3/4” 1” VCA-1100 VCA-2100 1/2” 3/4” 1” 1-1/8 3-5/16” 5/8” (11)
VCW-1104 VCW-2104 — 10” 7/8” 1” VCA-1150 VCA-2150 5/8” 3/8” 1” 15/16 2-3/8” 5/16” (18)
VCW-1111 VCW-2111 VCW-3111 11” 11/16” 1-1/16” VCA-1151 VCA-2151 5/8” 7/16” 1” 15/16 2-3/8” 3/8” (16)
VCW-1120 VCW-2120 — 12” 9/16 1-1/8” VCA-1152 VCA-2152 5/8” 9/16” 1” 15/16 2-13/16” 1/2” (13)
VCW-1121 VCW-2121 — 12” 5/8 1-1/8”
VCA-1153 VCA-2153 5/8” 5/16” 1” 15/16 2-3/8” 1/4” (20)
VCW-1122 VCW-2122 VCW-3122 12” 3/4” 1-1/8”
VCW-1123 VCW-2123 — 12” 1 1-1/8” VCA-1154 VCA-2154 5/8” 3/4” 1” 15/16 2-13/16” 5/8” (11)
VCW-1140 VCW-2140 VCW-3140 14” 3/4” 1-5/16” VCA-1200 VCA-2200 3/4” 9/16” 1-1/4” 1-1/8” 3-1/16” 1/2” (13)
VCW-1141 VCW-2141 — 14” 7/8” 1-5/16” VCA-1201 VCA-2201 3/4” 5/8” 1-1/4” 1-1/8” 3-3/8” 1/2” (13)
VCW-1142 VCW-2142 — 14” 1-1/8” 1-5/16” VCA-1202 VCA-2202 3/4” 3/4” 1-1/4” 1-1/8” 3-3/8” 5/8” (11)
VCW-1143 VCW-2143 — 14” 1-3/16” 1-5/16”
VCA-1300 VCA-2300 1” 3/4” 1-1/2” 1-1/2” 3-13/16” 5/8” (11
VCW-1160 VCW-2160 — 16” 1-3/16” 1-5/16”
VCW-1161 VCW-2161 — 16” 1-3/8” 1-5/16” VCA-1301 VCA-2301 1” 3/4” 1-5/8” 1-5/8” 3-13/16” 5/8” (11)
VCW-1180 VCW-2180 — 18” 1” 1-5/8” VCA-1302 VCA-2302 1” 1-3/16” 1-3/4” 1-1/2” 5-1/16” 1” (8)
VCW-1181 VCW-2181 — 18” 1-3/8” 1-5/8” VCA-1400 VCA-2400 1-1/4” 3/4” 2” 2” 4-3/8” 5/8” (11)
VCW-1182 VCW-2182 — 18” 1-3/4” 1-5/8” VCA-1401 VCA-2401 1-1/4” 3/4” 2” 2” 4-1/4” 5/8” (11)
VCW-1210 VCW-2210 — 21” 1-3/16” 1-7/8”
VCA-1402 VCA-2402 1-1/4” 1” 2” 2” 5-5/8” 1” (8)
VCW-1211 VCW-2211 — 21” 1-3/8” 1-7/8”
VCW-1240 VCW-2240 VCW-3240 24” 1-3/8” 2-1/16” VCA-1403 VCA-2403 1-1/4” 1-3/16” 2” 2” 5-5/8” 1” (8)
VCW-1241 VCW-2241 — 24” 1-1/2” 2-1/16” VCA-1404 VCA-2404 1-1/4” 1-3/8” 2” 2” 6-1/16” 1-1/8” (7)
VCW-1270 VCW-2270 VCW-3270 27” 1-3/16” 2-1/4” VCA-1500 VCA-2500 1-1/2” 1-3/16” 2” 2” 5-5/8” 1” (8)
VCW-1271 VCW-2271 VCW-3271 27” 1-3/8” 2-1/4” VCA-1501 VCA-2501 1-1/2” 1-3/8” 2” 2” 6-1/16” 1-1/8” (7)
VCW-1300 VCW-2300 — 30” 1-7/16” 2-1/2”
VCW-1301 VCW-2301 — 30” 1-3/4” 2-1/2”
VCW-1360 VCW-2360 — 36” 1-3/8” 3”
346-05
STUFFING BOXES
Rigid Rod
Lubricated type for use with moving shafts.
With grease gland and zerk fitting.
Part No. Size A Hex B Approx. Wt. Description Material Lube Non-Lube
VCS-1100 1/2 1-3/4 1-1/8 1-3/4 lbs. Body C. R. Steel x x
VCS-1200 3/4 2-1/8 1-1/2 2-3/4 lbs. Packing Nut Bronze x x
VCS-1300 1 2-3/8 1-3/4 3-5/8 lbs. Gland Bronze x
VCS-1400 1-1/4 2-3/8 2 3-3/4 lbs. Bushing Bronze x
VCS-1500 1-1/2 2-3/8 2-1/2 6 lbs. Packing Furnished by Customer
Flexible Shaft
Description Material
Part No. Size A (Max) B C Body Steel
VCS-2100 1/1 6 1-3/4 3-11/16 Split follower Bronze
VCS-2200 3/4 6 2-1/8 3-11/16 Retainer Ring Bronze
VCS-2300 1 6-1/2 2-1/2 4-3/16 Lock Nut Bronze
VCS-2400 1-1/4 7 2-3/4 4-11/16 Nut Bronze
VCS-2500 1-5/8 9 3-1/4 6-11/16 Packing Furnished by Customer
347-05
F G Usable Turns
Number Type A B C D E SQ THD Turns
6” diameter
VCDS-1400 3/4” Rod 14.00 8.00 10.00 8.00 .75 .75 5/8”-11 28
bolt circle
VCDS-1401 1” Rod 14.00 8.00 10.00 8.00 1.00 .75 5/8”-11 28 4 holes
VCDS-2400 3/4” Rod 24.00 6.50 10.00 8.00 .75 .75 5/8”-11 40 / 170 (Optional) 11/16”
VCDS-2401 1” Rod 24.00 6.50 10.00 8.00 1.00 .75 5/8”-11 40 / 170 (Optional) diameter
VCDS-2402 1-1/4” Rod 24.00 6.50 10.00 8.00 1.25 .75 5/8”-11 40 / 170 (Optional)
1000, 3000 & 5000 Series 2000, 4000 & 6000 Series
Locking Device Available
Multi-Turn 360° Indication 90° Indication Weld Type Add -L to part number for locking device
A B C D E F
Part No. † Part No. Part No. Size
Description Material
VCDB-1110 VCDB-3110 VCDB-5110 5/8” Rod 5.72 3.38 4.88 2.25 0.62 1.31
Housing Bronze
VCDB-1200 VCDB-3200 VCDB-5200 3/4” Rod 5.72 3.38 4.88 2.25 0.75 1.50
Weld Sleeve* Steel
VCDB-1300 VCDB-3300 VCDB-5300 1” Rod 5.72 3.38 4.88 2.25 1.00 1.50
Cover Mang. Bronze
VCDB-1400 VCDB-3400 VCDB-5400 1-1/4” Rod 5.72 3.38 4.88 2.25 1.25 1.88 Assembly & Cres
VCDB-1500 VCDB-3500 VCDB-5500 1/2” Flex 5.72 3.38 4.88 1.19 0.38 0.81 Indicator Cover Polycarbonate
VCDB-1600 VCDB-3600 VCDB-5600 3/4” Flex 5.72 3.38 4.88 1.50 0.56 1.31 Indicator Pin Cres
VCDB-1700 VCDB-3700 VCDB-5700 1” Flex 5.72 3.38 4.88 1.81 0.75 1.31 Indicator Nut Brass
VCDB-1800 VCDB-3800 VCDB-5800 1-1/4” Flex 5.72 3.38 4.88 2.12 1.00 1.31 Indicator Ring Brass
Ind. Nut Track Pin Cres
Multi-Turn 360° Indication 90° Indication Bolt Type Spindle Mang. Bronze
A B C D E F G
Part No. † Part No. Part No. Size
Thrust Bearing Steel
VCDB-2110 VCDB-4110 VCDB-6110 5/8” Rod 5.72 3.38 4.88 2.25 0.62 1.31 7.25
Thrust Washer Steel
VCDB-2200 VCDB-4200 VCDB-6200 3/4” Rod 5.72 3.38 4.88 2.25 0.75 1.50 7.25
O-Rings Buna-N
VCDB-2300 VCDB-4300 VCDB-6300 1” Rod 5.72 3.38 4.88 2.25 1.00 1.50 7.25
Retaining Rings Cres
VCDB-2400 VCDB-4400 VCDB-6400 1-1/4” Rod 5.72 3.38 4.88 2.25 1.25 1.88 7.25
Cap Screws** Steel
VCDB-2500 VCDB-4500 VCDB-6500 1/2” Flex 5.72 3.38 4.88 1.19 0.38 0.81 7.25
Woodruff Key Steel
VCDB-2600 VCDB-4600 VCDB-6600 3/4” Flex 5.72 3.38 4.88 1.50 0.56 1.31 7.25
VCDB-2700 VCDB-4700 VCDB-6700 1” Flex 5.72 3.38 4.88 1.81 0.75 1.31 7.25
*S.S. Weld Sleeve Add “-316”
VCDB-2800 VCDB-4800 VCDB-6800 1-1/4” Flex 5.72 3.38 4.88 2.12 1.00 1.31 7.25
**S.S. For “-316” Models
All dimensions in inches. †When ordering add a dash & turns required (2 digits), e.g. 1” x 25 turns = VDCDB-1300-25; 3/4” x 9 turns = VCDB-1200-09
348-05
?? ?
Having trouble finding THE PRODUCTS
349-05
2 36-1/2 49 36 36 10-1/2 13-3/4 6-3/4 7-5/8 5-1/8 6-1/4 1/2 20 3/8 5-1/2 2-1/2
2-1/2 54 64 63 63 11-5/8 15-5/8 8 8-3/4 6-3/8 7-5/8 1/2 23 7/16 6-1/2 2-7/8
3 76 85 – – 13-1/8 18 8 10-5/8 6-1/2 8 1/2 27 7/16 7 3-1/8
FLANGED
G Dia.
Mounting Holes
(2) Places
Dimensions (Inches)
Net Weight (lbs.)
Pipe Cast Iron A B C D E F G H I
Size & Ductile Bronze
10 420 500 23 11 19 47-1/2 29 12-3/16 1 15/16 1-1/2
12 550 825 27 13 23 67 38 16-3/4 1 1 1-1/2
14 850 1150 31 15-1/2 27 77 44-1/2 18-3/4 1 1 1-1/2
16 975 1400 31 15-1/2 27 77 44-1/2 18-3/4 1 1 1-1/2
18 1000 1450 31 15-1/2 27 77 44-1/2 18-3/4 1 1 1-1/2
These dimensions are for reference only. For installation purposes, request certified drawings.
?? ?
Having trouble finding THE PRODUCTS
350-05
?? ?
Having trouble finding THE PRODUCTS
351-05
1-1/4, 1-1/2 57 64 62 62 15 13-15/16 6-15/16 7-1/2 1/4 18-3/4 8 5-1/2 15 8 1-9/16 7/16
2 110 120 109 109 18-5/8 17-3/8 8-3/8 10 3/8 24 8-1/2 7-11/16 20 16 1-15/16 9/16
2-1/2 124 123 – – 18-5/8 17-3/8 8-3/8 10 3/8 24 8-1/2 7-11/16 20 16 1-15/16 9/16
4 285 283 300 315 23 21-1/2 13-1/4 16 1/2 35 9-1/2 8-15/16 27-1/8 18 3 9/16
5 403 412 – – 26 17-1/4 14-3/4 18-3/8 3/8 41 19-3/4 10-1/4 33-1/4 – 9-3/4 9/16
6 500 – – – 32 20-3/4 19-1/2 22 3/8 42 19-3/4 11-3/4 34-1/4 – 12-1/2 5/8
6 – 583 – – 32 21-1/4 15-1/8 21-1/2 3/8 42 19-3/4 11-3/4 34-1/4 – 12-1/2 5/8
6 – – 615 – 31-1/4 20-3/4 18-1/2 22 3/8 42 19-3/4 11-3/4 35 – 12-1/2 5/8
6 – – – 580 31-1/4 20-3/4 18-1/2 22 3/8 42 19-3/4 11-3/4 35 – 12-1/2 5/8
8 1500 1800 1670 1610 45-1/2 30-3/4 23 25 1/2 56 28-1/8 – 50-5/8 – 17 15/32
Can be furnished to MIL Spec Standards -- Please specify if required. Dimensions are in inches.
These dimensions are for reference only. For installation purposes, request certified drawings.
?? ?
Having trouble finding THE PRODUCTS
352-05
Y-STRAINERS
?? ?
Having trouble finding THE PRODUCTS
353-05
Dimensions (Inches) Net Weight (lbs.) Dimensions (Inches) Net Weight (lbs.)
5 16 17-1/2 15 9-1/2 10-1/4 1 22 45 153 81 237 5 16 17-1/2 15 11-1/4 11-1/4 1 22 9 128 9 176
8 22 23 21 11 12 1-1/2 28 110 281 184 407 8 22 23 21 13-1/4 13-1/4 1-1/2 28 15 226 15 278
10 32 33 25 12 13 1-1/2 33 170 450 307 710 10 32 33 25 14-1/2 14-1/2 1-1/2 33 30 360 30 483
12 35 36 28 14 15 1-1/2 39 209 644 390 1024 12 35 36 28 15-3/4 15-3/4 1-1/2 39 37 535 37 734
24 48 49-3/4 60 21 22-1/2 2 78 681 2291 1403 3497 24 48 49-3/4 60 22-1/2 22-1/2 2 78 88 1860 88 234
**Force required to lift cover in lbs.
?? ?
Having trouble finding THE PRODUCTS
354-05
Type 1500-FLF
Angle type In-line Valve The angle type pressure/vacuum relief valve type 1500-FLF operates through the header in common venting
systems or, in smaller versions, through the branch pipe. It is designed to relieve pressure and vacuum during
loading, discharging, voyage (thermal variation and sloshing) and ballasting. Cargo operation is possible with
the valve in automatic and manual mode, provided of course that the IG pressure is monitored or controlled.
The downstream outlet should be through an approved device to prevent the passage of flame according to
IMO MSC/Circ. 677.
ød ød øA B C H øD P-mm Holes
inch mm mm mm mm mm mm drilling
Approved by:
16 400 860 480 380 1370 565 515 16 x 25
Lloyd’s Register of Shipping
American Bureau of Shipping 14 350 800 423 335 1150 540 460 16 x 22
Det Norske Veritas 10 250 560 345 255 900 395 350 12 x 22
Bureau Veritas 8 200 470 260 210 790 340 295 8 x 22
U.S.C.G. Cert. No. 6 150 320 196 158 610 285 240 8 x 22
162.017/121/1 4 100 285 155 155 550 220 180 8 x 18
3 80 225 145 125 490 200 160 4 x 18
2-1/2 65 210 120 110 450 185 145 4 x 18
2 50 160 100 100 400 165 125 4 x 18
Type DA Type DA is a combined pressure/vacuum valve, designed to relieve pressure and vacuum
In-line automatic weightloaded pressure/vacuum during loading, discharge, voyage (thermal variation) and ballasting in common venting systems.
relief valves with flame screen protected vacuum The valves can operate in automatic or manual mode. During voyage, the valves operate auto-
units drawing ambient air. matically and relieve pressure or vacuum caused by thermal variations and sloshing. Type DA
features very low pressure drop due to a low number of flow direction changes, especially with
regard to the vacuum unit as pressure drop across the end-of-line flame screen and piping down-
stream is eliminated. Pressure outlet to be through an approved device to prevent the passage of
flame according to IMO MSC/Circ. 677. The vacuum valve is separately approved to 677.
Installation should eliminate the vacuum valve from exposure to waves to keep water from
entering. Water excluding device is optional.
PRES-VAC ENGINEERING A/S • Svanevang 3-5 • DK-3450 Allerød • Denmark • Tel: +45 4817 4055 • Fax +45 4817 1788
E-mail: presvac@pres-vac.com • Web site: www.pres-vac.com
0349-04 5/2/05 9:21 AM Page 1
355-05
Type HS-2293-6
High Velocity pressure/vacuum relief vent type HS actively protects the tank, crew Code HS øD øD øK H B P-mm Holes
and environment. Tailor-made to suit each application. Type HS can be used in No. Valve inch mm mm mm mm øF drilling
common and individual systems and in IG systems 32 10 16 400 495 920 695 565 515 16 x ø22
31 10 12 300 495 920 670 445 400 12 x ø22
Certification: 30 10 10 250 495 920 670 395 350 12 x ø22
Certified by the Danish Government’s Maritime
29 8 16 400 450 850 565 565 515 16 x ø22
Administration according to IMO MSC/Circ. 373/
Rev. 1 for gas group II A, II B-1, II B-2 and II B-3. 28 8 12 300 450 850 565 445 400 12 x ø22
Approved for ADNR vessels and by U.S.C.G. for 27 8 10 250 450 850 565 395 350 12 x ø22
VECS. 26 8 8 200 450 850 565 340 295 8 x ø22
Requirements for Californian waters. Installation 25 7 16 400 450 905 620 565 515 16 x ø25
to be in accordance with IMO MSC/Circ. 731 and 24 7 12 300 450 905 615 445 400 12 x ø22
maximum allowable vent pipe lengths approved 23 7 10 250 450 905 615 395 350 12 x ø22
by the Danish Maritime Administration. Does not 22 7 7 175 450 905 610 315 270 8 x ø22
meet European standard. 21 6 12 300 380 875 580 445 400 12 x ø22
20 6 10 250 380 875 555 395 350 12 x ø22
Main Features of type HS-2293-6 19 6 9 225 380 875 555 370 325 8 x ø22
• Complies with all pre-1995 IMO, VECS and hydro- 18 6 8 200 380 875 555 340 295 8 x ø22
carbon emission regulations and API Standard 2000 17 6 6 150 380 875 555 285 240 8 x ø22
• Only one moving part in each unit 16 5 8 200 310 780 500 340 295 8 x ø22
• Automatic self-closing checklifts 15 5 6 150 310 780 500 285 240 8 x ø22
• Simple, rigid design and construction 14 5 5 125 310 780 500 250 210 8 x ø18
• Available in materials compatible with any cargo; 13 6M 8 200 310 660 450 340 295 8 x ø22
Employs no soft seals 12 6M 6 150 310 660 440 285 240 8 x ø22
• Protects crew from exposure by constant vertical 11 4 6 150 250 620 385 285 240 8 x ø22
efflux at all times without manual adjustment 10 4 5 125 250 620 375 250 210 8 x ø18
• System design engineering available for IMO 9 4 4 100 250 620 375 220 180 8 x ø18
MSC/ Circ.731, Master’s Loading Chart 8 3 6 150 220 550 355 285 240 8 x ø22
7 3 5 125 220 550 340 250 210 8 x ø18
• Easy maintenance
6 3 4 100 220 550 325 220 180 8 x ø18
• Spares readily available
5 3 3 80 220 550 320 200 160 4 x ø18
• Fixed set-point providing nearly 100% accuracy 4 2 4 100 190 500 290 220 180 8 x ø18
• Available in more than 400 configurations 3 2 3 80 190 500 280 200 160 4 x ø18
2 2 2-1/2 65 190 465 220 185 145 4 x ø18
1 2 2 50 190 465 220 165 125 4 x ø18
356-05
PRES-VAC ENGINEERING A/S • Svanevang 3-5 • DK-3450 Allerød • Denmark • Tel: +45 4817 4055 • Fax +45 4817 1788
E-mail: presvac@pres-vac.com • Web site: www.pres-vac.com
0362-04 5/2/05 9:22 AM Page 1
357-05
1 Typical Check
2 1 Bolts Alloy Steel – ASTM – A193 B7
3 2 Rivet Carbon Steel
4 3 Name Plate Etched Aluminum
5 4 Bonnet Carbon Steel – ASTM – A105
6
5 Gasket 18/8 Asbestos – Spiral Wound
6 Piston 13% Chr. AISI 420 S.S.
7
7 Seat 13% Chr. AISI 410 S.S.
8
8 Body Carbon Steel – ASTM – A105
MARINE FITTINGS
& FLANGES
Valve automation
W & O SUPPLY MARINE VALVES
- Gate, Globe, Angle, Check
- All Materials, Incl. Metrics P.O. Box 3907 • Jacksonville, FL 32206 - Hose Valves
& controls
MARINE PIPE & TUBING Tel: 800-962-9696 • 904-354-3800 - Strainers & Steam Traps
- All Materials & Schedules Fax: 904-355-5542 • www.wosupply.com - Regulators, Relief & Safety
- Condenser Tubes jacksonville.fl@wosupply.com - Metrics
0348-03 5/2/05 9:23 AM Page 348
358-05
INVERTED VENT CHECK VALVES – 10”, 12” & 14” – 1221 SERIES
Butt weld or flanged. Flanges are Body, Spacer Galv. Steel
ASA-150 lb. standard slip-on type. Cover Black Steel
All sizes available without cover or Float Copper
float. or Monel
Flame Screen, S.S. or
Dimensions (Inches) Protective Screen Monel
A B C D E Seat Ring, Guide Pin, S.S.
(IPS) Screws,
10 19-1/4 9-1/8 10-5/8 3-1/4 Toggle Assembly
Hinge Pin
12 21-3/4 11 12-5/8 4-1/4
14 24-3/4 13 14-3/4 5-1/4
359-05
Outlet Same Size as Inlet Dimensions – Inches Outlet Same Size as Inlet Dimensions – Inches
A & I Dia. 2 2-1/2 3 4 5 6 8 A & E Dia. 2-1/2 3 4 5 6
B & J Dia. 6 7 7-1/2 9 10 11 13-1/2 B & G Dia. 7 7-1/2 9 10 11
D 8 9-1/2 9-1/2 10-1/2 14 15 16 C 1/2 1/2 1/2 5/8 1
E 3/8 9/16 9/16 9/16 5/8 3/4 1 D 12 12 12-7/8 14-3/4 18
G & K Dia. 4-3/4 5-1/2 6 7-1/2 8-1/2 9-1/2 11-3/4 K 5-3/8 5-3/8 6-1/8 6-3/4 8-5/16
L 1-1/4 1-1/4 1-1/2 1-1/2 1-1/2
360-05
Bottom Outlet – 1023 Series KINGS POINT MACHINERY, INC. Right Angle – 1024 Series
Socket Weld – 1023S DECK DRAINS – TRAP TYPE For threaded, specify 1024T.
Both 1023 and
Body Galv. Steel, 1024 drains are 1024S
Bronze Alum. Without
available without The model
Strainer, Baffle, Bronze trap and baffle. closure
Cleanout Plug, 1024 is not
valve
Valve Disc Steel “T” wrench available
Valve Stem Monel available for with valve.
Gasket Neoprene drains
Screws S.S. with closure
valve.
Size
(IPS) Dimensions–Inches
A B C D E F G
1-1/2 5-3/4 5-1/8 4 1.92 4-3/8 3-1/4
1023S W/V 1023S 2 5-3/4 5-1/8 4 2.41 4-3/8 3-1/4
With closure Without closure
valve, no trap valve, with trap
DECK DRAINS – 1017 Series Size
(IPS) Dimensions–Inches REFRIGERATION SPACE DRAIN
A B C D E
Butt Weld – 1220 Series
1-1/2 4-1/2 4 4 1.92 Body, Flanges, Steel,
2 4-1/2 4 4 2.41 Strainer Plate Galv. or
2 5-1/2 5 4 2.41 Supports, Black
2 6-3/4 6 5-1/2 2.41 Reducer
2-1/2 2-1/2 4-1/2 4 2.91 Strainer Plate Bronze
2-1/2 5-1/2 5 5 2.91 Rod Brass
2-1/2 6-1/2 6 5 2.91
Plug Wood,
2-1/2 6-3/4 6 5-1/2 2.91
Epoxy-
3 5-1/2 5 5 3.54
Coated
3 6-3/4 6 5-1/2 3.54
3 7 6-1/2 5-1/4 3.54 Eyebolt, Nut Galv.
3 8-3/4 8 6 3.54 and Washer Steel
4 5-1/2 5 5 4.56
* Dimension “E”, below, shown for
4 6-1/2 6 5-1/2 4.56
standard insulation htickness.
4 6-3/4 6 5-1/2 4.56
Can be modified for special
4 8-3/4 8 6 4.56
installations. Note that changes in
Butt Weld 6 11-3/4 11 12-3/4 6.69
“E” may change “D”.
1017V
Size
Body Steel, Galv. (IPS) Dimensions–Inches
or Black A B C D E F G
Socket Weld
1017S Strainer Plate Bronze 2 5 7-1/2 16-3/8 9-5/8 5-9/16 12
Screws S.S. 2-1/2 5 7-1/2 16-3/8 9-5/8 5-9/16 12
3 5 7-1/2 16-3/8 9-5/8 5-9/16 12
Part No. Dia. Sq. Part No. Dia. Sq. Part No. Dia. Sq. Part No. Dia. Sq. Part No. Dia. Sq.
134-3E 3 9/32 134-6N 6 3/4 134-9K 9 9/16 134-12R 12 1 134-18RN 18 1-3/4
134-3F 3 5/16 134-7H 7 7/16 134-9L 9 5/8 134-12RC 12 1-3/16 134-21RC 21 1-3/16
134-4F 4 5/16 134-7J 7 1/2 134-9N 9 3/4 134-12RG 12 1-3/8 134-21RG 21 1-3/8
134-4G 4 3/8 134-7K 7 9/16 134-9RC 9 1-3/16 134-14N 14 3/4 134-24RG 24 1-3/8
134-5F 5 5/16 134-7L 7 5/8 134-10K 10 9/16 134-14P 14 7/8 134-24RJ 24 1-1/2
134-5G 5 3/8 134-8H 8 7/16 134-10L 10 5/8 134-14RC 14 1-3/16 134-27RC 27 1-3/16
134-5J 5 1/2 134-8J 8 1/2 134-10N 10 3/4 134-14RG 14 1-3/8 134-27RG 27 1-3/8
134-6G 6 3/8 134-8K 8 9/16 134-10RC 10 1-3/16 134-16RC 16 1-3/16 134-30RG 30 1-3/8
134-6H 6 7/16 134-8L 8 5/8 134-10RD 10 1-1/4 134-16RG 16 1-3/8 134-30RH 30 1-7/16
134-6J 6 1/2 134-8N 8 3/4 134-11K 11 9/16 134-18RC 18 1-3/16 134-36RG 36 1-3/8
134-6K 6 9/16 134-9J 9 1/2 134-12N 12 3/4 134-18RG 18 1-3/8
361-05
DIMENSIONS – INCHES
2” SEAL 3” SEAL
SIZE A A B C D D D D
Male Female Male Female Male Female TYPE C
1-1/2 1.900 1.905 5 4-19/32 8-5/16 6-13/16 9-5/16 7-13/16
Male silbraze connection.
2 2.375 2.380 5-9/16 5-5/32 8-21/32 7-21/32 9-21/32 8-7/32
Bronze body with integrally cast
2-1/2 2.875 2.882 6-5/8 6-5/32 8-15/16 7-5/8 9-15/16 8-5/8 steel welding sleeve. Bronze
3 3.500 3.507 7-5/8 7-3/32 9-3/8 8-1/8 10-3/8 9-1/8 strainer plate. Copper-nickel
screws.
Specify size, type, and wooden or
steel deck installation
362-05
PURPOSE FUNCTION
The Vertical Vent Check Valve is The Vertical Vent Check Valve is
used to protect tanks and a “normally open” check valve.
bulkheads from vacuum In heavy seas, any deck
pressure buildup during loading washover will push the float to
and unloading of liquid and dry the closed position, stopping
cargo. water from entering the lower
bulkheads.
DESCRIPTION
To prevent a spark from igniting
The Vertical Vent Check Valve tank fluids or dry cargo dust, the Vertical Vent Check Valve (closed)
was designed to eliminate the fine stainless steel flame screen
need for a “goose neck” on deck arrests flames from crossing this Specifications
for each valve. It is composed of barrier. Body:
an inner and outer valve body Steel Galvanized,
(hot-dipped galvanized), float The ball float prevents Stainless Steel
contamination of tank cargo by Sizes:
(available in a variety of 11/2" through 14"
materials), stainless steel flame sea water during heavy seas.
Connections:
screen, and a steel cover Welded & Flanged – up to 14"
Threaded – up to 6"
The component design allows Float Materials:
for easy disassembly, to allow Copper – up to 14"
cleaning of the venting chamber. Stainless Steel – up to 6"
Monel – up to 4"
Polyethylene – up to 10"
Steel Cover*
Gasket Screen
363-05
16” Inverted Vent Check Valve – Model 1700 Only Available in Black or Galvanized Cast Steel.
Copper Float. PVC Cap.
364-05
365-05
NPS 8x6x8 10x8x10 12x10x12 14x12x14 16x14x16 18x16x18 20x18x20 22x20x22 24x20x24 26x22x26 28x24x28 30x26x30 32x28x32
Figure No. 1911BY, 14311BY
DN 200 250 300 350 400 450 500 550 600 650 700 750 800
20 26 31 36 39 43 48 52 52 57 61 64 68
A - End to End
508 660 787 914 991 1092 1219 1321 1321 1448 1549 1626 1727
33.5 40 46.75 54.5 59 68 73.75 82 82 89.25 95 102 109
E - Center to Top, (Open)
851 1016 1187 1384 1499 1727 1873 2083 2083 2267 2413 2591 2769
24 24 36 36 36 36 36 48 48 48 48 60 60
G - Handwheel Diameter
610 610 914 914 914 914 914 1219 1219 1219 1219 1524 1524
530 891 1523 2118 2805 3250 4500 6000 6500 8000 10,000 12,500 15,000
Weight, (Welding)
241 405 692 963 1275 1474 2041 2721 2948 3629 4535 5670 6800
Standard Features Pressure Class 900 (PN 150)
• Bodies and bonnets are cast steel (WCB, WC6, WC9,
CF8M or CF8C). FIG. NO.
TYPE ENDS NPS (DN)
• Pressure-seal Bonnet, OS&Y. STD CL SPL CL
• Globe & angle design. 4016 – Globe Flanged 3 (80)
• Integral stellite seat, disk and backseat. 4016Y 4316Y Globe Buttwelding thru 14 (600)
• Body guided disk piston. 4017 – Angle Flanged 3 (80)
• 13% chromium stainless steel stem. 4017Y 4317Y Angle Buttwelding thru 24 (600)
• Asbestos free graphitic packing.
• Yoke bushing thrust bearings size 5 and larger.
Dimensions - Globe & Angle 4017Y 4017
Figure No. 4016/4016Y,
4017/4017Y, NPS 3 4 5 6 8 10 12 14 16 20 24
4316Y, 4317Y DN 80 100 125 150 200 250 300 350 400 ** 500 600
15 18 22 24 29 33 38 40.5
A - End to End, (Welding) Valve Not Available
381 457 559 610 737 838 965 1029
7.5 9 11 12 14.5 16.5 19 19 26 32.5 39
B - Center to Face, (Welding) **
190 229 279 305 368 419 483 483 660 825 991
15 18 22 24 29 33 38 40.5
C - Face to Face, (Flanged) Valve Not Available
381 457 559 610 737 838 965 1029
7.5 9 11 12 14.5 16.5 19 21.75
D - Center to Face, (Flanged) Available Upon Request
190 229 279 305 368 419 483 552
4016Y 4016 22.5 26.25 30.6 37 46 54.75 64.75 71.25
E - Center to Top, Globe (Open) Valve Not Available
572 667 777 940 1168 1391 1645 1810
F - Center to Top, Angle (Open) 20.4 23.75 28.25 34.25 43.4 49.25 60 60 78.5 95 102
518 603 718 870 1102 1251 1524 1524 1994 ** 2413 2591
16 16 20 20 28 28 36 36 36 72 72
G - Handwheel Diameter* **
406 406 508 508 711 711 914 914 914 1829 1829
* Impactor handwheel is standard on all valves.
838
PISTON CHECK VALVES–Class 800–2000 PSI @ 100°F (138 BAR @ 38°C)
Standard Features Pressure Class 800 (PN 134)
• Bodies and covers are of forged FIG. NO. TYPE ENDS NPS (DN)
steel (A105 or F11). 838 Y-Pattern Threaded 1/4 (5) thru
• Bolted cover. 838Y Y-Pattern Socket Welding 2 (50)
Dimensions - Globe
• Y-Pattern.
• Body-guided hardened stainless NPS 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Figure No. 838/838Y
steel disk. DN 6 10 15 20 25 32 40 50
• Integral stellite seat. 3 3 3 3.6 4.3 5.8 5.8 6.5
A - End to End
• Asbestos free spiral wound 76 76 76 91 109 147 147 165
cover gasket. 2.8 2.8 2.8 3.3 3.8 4.6 4.6 5.1
E - Center to Top
• Stainless steel spring. 71 71 71 84 97 117 117 130
STOCKING LOCATIONS
LINDEN, NJ
W & O SUPPLY STOCKING LOCATIONS
TAMPA • MOBILE
PHILADELPHIA • NORFOLK P.O. Box 3907 • Jacksonville, FL 32206 NEW ORLEANS • HOUSTON
CHARLESTON Tel: 800-962-9696 • 904-354-3800 SAN DIEGO • LONG BEACH
JACKSONVILLE Fax: 904-355-5542 • www.wosupply.com SEATTLE
FORT LAUDERDALE ANTWERP
jacksonville.fl@wosupply.com
0360-04 5/2/05 9:30 AM Page 356
366-05
848Y
828 849
Standard Features Standard Features
829 • Bodies and bonnets are of forged steel (A105 or F11).
• Bodies and bonnets are of forged steel (A105).
• Bolted bonnet, OS&Y. • Bolted bonnet, OS&Y.
• Globe & angle design. • Y-Pattern or angle design.
• Body-guided hardened stainless steel disk. • Body-guided hardened stainless steel disk. Pressure Class 800 (PN 130)
• Integral stellite seat. • Integral stellite seat.
Pressure Class 600 (PN 110) FIG. NO. TYPE ENDS NPS (DN)
• Integral backseat. • Integral backseat.
• 13% chromium stainless steel stem. 848 Y-Pattern Threaded
• 13% chromium stainless steel stem. FIG. NO. TYPE ENDS NPS (DN) 1/4 (6)
• Asbestos free graphitic packing. • Asbestos free graphitic packing. 848Y Y-Pattern Socket Welding
828 Globe Flanged 1/2 (15) thru thru
• Asbestos free spiral wound • Asbestos free spiral wound 849 Angle Threaded
bonnet gasket. 2 (50)
bonnet gasket. 829 Angle Flanged 2 (50) 849Y Angle Socket Welding
• Knobbed handwheel. • Knobbed handwheel.
Dimensions - Globe & Angle Bold face numerals are in inches and pounds. Dimensions - Globe & Angle Bold face numerals are in inches and pounds.
NPS 1/2 3/4 1 1-1/4 1-1/2 2 NPS 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Figure No. 828, 829
DN 15 20 25 32 40 50 DN 6 10 15 20 25 32 40 50
6.5 7.5 8.5 9.5 9.5 11.5 3 3 3 3.6 4.3 5.8 5.8 6.5
C - Face to Face, Globe (Flanged) A - End to End, Globe
165 191 216 241 241 292 76 76 76 91 109 147 147 165
3.3 3.8 4.3 4.8 4.8 5.8 1.5 1.5 1.5 1.8 2 2.9 2.9 3.3
D - Center to Face, Angle (Flanged) B - Center to End, Angle
84 97 109 122 122 147 38 38 38 46 51 74 74 84
6.1 6.9 7.7 11.1 11.1 12.1 6 6 6 6.8 7.6 10.9 10.9 12.1
E - Center to Top, Globe (Open) E - Center to Top, Globe (Open)
155 175 196 282 282 307 152 152 152 173 193 277 277 307
5.7 6.4 7.1 10.2 10.2 11.0 5.7 5.7 5.7 6.4 7.1 10.2 10.2 11
F - Center to Top, Angle (Open) F - Center to Top, Angle (Open)
145 163 180 259 259 279 145 145 145 163 180 259 259 279
3.8 4.3 4.8 7.1 7.1 8.5 3.8 3.8 3.8 4.3 4.8 7.1 7.1 8.5
G - Handwheel Diameter G - Handwheel Diameter
97 109 122 180 180 216 97 97 97 109 122 183 180 216
7.5 12 16 27 32 38 4 4 4 5.5 7.5 16 16 23
Weight, Globe Weight, Globe
3.4 5.4 7.2 12.2 14.4 17.1 1.8 1.8 1.8 2.5 3.4 7.2 7.2 10.4
7 11 15 26 31 36 4 4 4 5.5 7 17 17 24
Weight, Angle Weight, Angle
3.2 5 6.8 11.7 14 16.2 1.8 1.8 1.8 2.5 3.2 7.7 7.7 10.8
Series 1500
3600 PSI @ 100°F (248 BAR @ 38°C)
1049
1028 1048Y
Standard Features Standard Features
• Bodies and bonnets are of forged steel (F11). • Bodies and bonnets are of forged steel (A105 or F11).
• Bolted bonnet, OS&Y. 1029 • Bolted bonnet, OS&Y.
• Globe or angle design. • Y-Pattern or angle design.
• Body-guided hardened stainless • Body-guided hardened stainless steel disk.
steel disk. FIG. NO. TYPE ENDS NPS (DN)
• Integral stellite seat.
• Integral stellite seat. 1028 Globe Flanged 1/2 (15) • Integral backseat. FIG. NO. TYPE ENDS NPS (DN)
• Integral backseat. • 13% chromium stainless steel stem. 1048 Y-Pattern Threaded
1029 Angle Flanged thru 2 (50)
• 13% chromium stainless steel stem. 1/4 (6)
• Asbestos free graphitic packing. 1048Y Y-Pattern Socket Welding
• Asbestos free graphitic packing. • Asbestos free spiral wound thru
• Asbestos free spiral wound bonnet gasket. 1049 Angle Threaded
bonnet gasket. 2 (50)
• Knobbed handwheel. 1049Y Angle Socket Welding
• Knobbed handwheel.
Dimensions - Globe & Angle Dimensions - Globe & Angle
NPS 1/2 3/4 1 1-1/4 1-1/2 2 Figure No. 1048/1048Y, NPS 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2
Figure No. 1028, 1029
DN 15 20 25 32 40 50 1049/1049Y DN 6 10 15 20 25 32 40 50
8.5 9 10 12 12 14.5 3 3 3 3.6 4.3 5.8 5.8 6.5
C - Face to Face, Globe (Flanged) A - End to End, Globe
216 229 254 305 305 368 76 76 76 91 109 147 147 165
4.3 4.5 5 6 6 7.3 1.5 1.5 1.5 1.8 2 2.9 2.9 3.3
D - Center to Face, Angle (Flanged) B - Center to End, Angle
109 114 127 152 152 185 38 38 38 46 51 74 74 84
7 7.7 7.7 11.1 11.1 12 6.1 6.1 6.1 6.9 7.6 10.9 10.9 12.1
E - Center to Top, Globe (Open) E - Center to Top, Globe (Open)
178 196 196 282 282 305 155 155 155 175 197 277 277 307
6.6 7.1 7.1 10.2 10.2 11.1 5.8 5.8 5.8 6.6 7.1 10.2 10.2 11
F - Center to Top, Angle (Open) F - Center to Top, Angle (Open)
168 180 180 259 259 282 147 147 147 168 183 259 259 279
4.3 4.8 4.8 7.1 7.1 8.5 3.8 3.8 3.8 4.3 4.8 7.1 7.1 8.5
G - Handwheel Diameter G - Handwheel Diameter
109 122 122 180 180 216 97 97 97 109 122 183 183 216
15 19 26 38 47 77 4 4 4 5.5 8 17 17 24
Weight, Globe Weight, Globe
6.8 8.6 11.7 17.1 21.2 34.7 1.8 1.8 1.8 2.5 3.6 7.7 7.7 10.8
15 20 26 41 49 80 4 4 4 5.5 7.5 17 17 25
Weight, Angle Weight, Angle
6.8 9 11.7 18.5 22.1 36 1.8 1.8 1.8 2.5 3.4 7.7 7.7 11.3
MARINE FITTINGS
& FLANGES W & O SUPPLY MARINE VALVES
- Gate, Globe, Angle, Check
- All Materials, Incl. Metrics P.O. Box 3907 • Jacksonville, FL 32206 - Hose Valves
MARINE PIPE & TUBING Tel: 800-962-9696 • 904-354-3800 - Strainers & Steam Traps
- All Materials & Schedules Fax: 904-355-5542 • www.wosupply.com - Regulators, Relief & Safety
- Condenser Tubes jacksonville.fl@wosupply.com - Metrics
0361-04 5/2/05 9:31 AM Page 357
367-05
Figure 1641
STRAIGHTWAY
BLOW-OFF VALVE
1641/1643
Dimensions - Globe & Angle
NPS 1-1/2 2 2-1/2 Standard Features Pressure Class 400 (PN 68) & 600 (PN 110)
Figure No. 1641/1641Y, 1643/1643Y
DN 40 50 65 • Size 1-1/2 and 2 bodies FIG. NO. TYPE ENDS NPS (DN)
6.8 8 11.5 & bonnets are forged 1641 Globe Flanged 1-1/2 (40) & 2-1/2 (65)
A - End to End, Globe (Welding)
173 203 292 steel (A105). 1641Y Globe Socket Welding 1-1/2 (40) & 2 (50)
3.4 3.8 5.8
B - Center to End, Angle (Welding) • Size 2-1/2 bodies and bonnets 1641Y Globe Buttwelding 2-1/2 (65)
86 97 147
are cast steel (WCB). 1643 Angle Flanged 1-1/2 (40) & 2-1/2 (65)
12.4 13.1 14.4
C - End to End, Globe (Flanged) 1643Y Angle Socket Welding 1-1/2 (40) & 2 (50)
315 333 366 • Bolted bonnet, OS&Y.
4.8 5.8 6.5 1643Y Angle Buttwelding 2-1/2 (65)
D - Center to End, Angle (Flanged)
122 147 165
• Straightway and angle design.
13.4 15.3 15.9 • Size 1-1/2 and 2 have
E - Center to Top, Globe (Open)
340 389 404 hardened stainless steel disk.
12.4 13.9 14.3 • Size 2-1/2 has stellite
F - Center to Top, Angle (Open)
315 353 363
faced disk.
11 11 11
G - Handwheel/ Handle Diameter • Integral stellite seat.
279 279 279
44 62 95 • Integral backseat. Pressure Ratings (B16.34 Standard Class)
Weight, Globe (Flanged)
19.8 27.9 43.1
27 38 76 • 13% chromium stainless Flanged or Welding Ends Class 600 Primary Service
Weight, Globe (Welding) steel stem. Maximum Boiler Drum Pressure* 935 psi (67 bar)
12.2 17.1 34.2
41 55 85 • Asbestos free spiral wound Maximum Non-Shock 1480 psi at 100°F (102 bar)
Weight, Angle (Flanged)
18.5 24.8 38.5 bonnet gasket. * This adjusted pressure rating represents the maximum allowable working
25 36 66 pressure for this Class valve in boiler feed and blow-off line service.
Weight, Angle (Welding) • Impactor handle.
11.3 16.2 29.7
STOCKING LOCATIONS
LINDEN, NJ
W & O SUPPLY STOCKING LOCATIONS
TAMPA • MOBILE
PHILADELPHIA • NORFOLK P.O. Box 3907 • Jacksonville, FL 32206 NEW ORLEANS • HOUSTON
CHARLESTON Tel: 800-962-9696 • 904-354-3800 SAN DIEGO • LONG BEACH
JACKSONVILLE Fax: 904-355-5542 • www.wosupply.com SEATTLE
FORT LAUDERDALE ANTWERP
jacksonville.fl@wosupply.com
0364-04 5/2/05 9:31 AM Page 360
368-05
Valve Size 450 500 550 600 650 700 750 800
Face to Face (L) 450 500 550 600 650 700 750 800
Height (H) 1300 1420 1550 1650 1750 1850 1950 2050
Flange Diam. (D) 620 675 745 795 845 905 970 1020
Handwheel Diam. (D1) 450 500 500 500 560 560 630 630
Dimensions in mm
The products listed above and below this message are not available from the same manufacturing source.
Type D
Flanged connection only ANGLE CARGO VALVES
Ductile Iron
Bronze Trim
MARINE FITTINGS
& FLANGES W & O SUPPLY MARINE VALVES
- Gate, Globe, Angle, Check
- All Materials, Incl. Metrics P.O. Box 3907 • Jacksonville, FL 32206 - Hose Valves
MARINE PIPE & TUBING Tel: 800-962-9696 • 904-354-3800 - Strainers & Steam Traps
- All Materials & Schedules Fax: 904-355-5542 • www.wosupply.com - Regulators, Relief & Safety
- Condenser Tubes jacksonville.fl@wosupply.com - Metrics
0365-04 5/2/05 9:32 AM Page 1
369-05
370-05
BORE A B C D
in. mm in. mm in. mm in. mm in. mm
1/2 12.7 3-3/4 95.3 1/4 6.4 3 76.2 2-5/8 66.7
3/4 19.1 4 101.6 1/4 6.4 3 76.2 2-5/8 66.7
1 25.4 4-1/2 114.3 5/16 7.9 3 76.2 2-3/4 69.9
1-1/4 31.8 4-3/4 120.7 5/16 7.9 3-3/4 95.3 4 101.6
1-1/2 38.1 5-1/4 133.4 3/8 9.5 3-3/4 95.3 4 101.6
371-05
Nominal
DIMENSIONS (mm)
Size
(D) L B C A
20 150 167 125 105
25 160 177 125 115
32 180 186 125 140
40 200 204 125 150
50 230 247 200 165
65 290 380 200 185
80 310 454 200 200
100 350 511 200 220
125 400 555 400 250
150 480 626 400 285
372-05
JIS VALVES
BRONZE GLOBE VALVES BRONZE ANGLE VALVES
F7301-5 kgf/cm2 F7303-16 kgf/cm2 F7302-5 kgf/cm2 F7304-16 kgf/cm2
11
9
10
5
15
14
7
16
6
17
2
18 4
13
1
3
373-05
JIS VALVES
Screwed Type BRONZE HOSE GLOBE & ANGLE VALVES
F7334 – 5 kgf/cm2 & 10 kgf/cm2
7 11
18
10
6 9
5
2
12 14
15 No. Item Material No. Item Material No. Item Material
8
1 4 1 Body BC6 7 Stem C3771BD 13 Lock Washer C2600P
13
3
2 Bonnet 8 Set Screw C2770W 14 Packing JIS F7102
3 Disc BC6 9 Hand Wheel FC20 15 Gasket JIS F7102
16 4 Disc Nut or 10 Nut C3771BD 16 Cap BC6
17 5 Gland C3771BD 11 Split Pin C2600W 17 Chain C2600W
6 Gland Nut 12 Lock Plate C2600P 18 Name Plate C2600P
Globe
Nominal
11 18
d d1 L D C N h t H l D2 d3 a L1 L2 d8
Dia. Press.
10 9
15 5 15 20 68 80 60 4 12 9 129 8 80 M42 x 2 3 55 55 52
7
5 15 10 15 20 73 95 70 4 15 12 129 8 80 M42 x 2 4 70 60 52
14 6
2 25 5 25 30 78 95 75 4 12 10 161 12 125 M42 x 2 4 60 65 52
12
8 15 25 10 25 30 83 125 90 4 19 14 161 12 125 M42 x 2 4 65 70 52
1 13
16 Unit: mm
Angle
Nominal
17 d d1 L D C N h t H l D2 d3 a L1 L2 d8
Dia. Press.
15 5 15 20 73 80 60 4 12 9 129 8 80 M42 x 2 3 50 60 52
15 10 15 20 73 95 70 4 15 12 129 8 80 M42 x 2 4 55 60 52
25 5 25 30 78 95 75 4 12 10 161 12 125 M42 x 2 4 60 65 52
25 10 25 30 83 125 90 4 19 14 161 12 125 M42 x 2 4 65 70 52
Unit: mm
10
24
11 Globe
9
Nominal
7 5
6
d d1 L D C N h t H l D2 d3 a L1 L2
14
2
Dia. Press.
12
8 15
20
40 5 40 45 128.5 120 95 4 15 12 193 17.5 140 M52 x 2 5 80 80
19 40 10 40 45 133.5 140 105 4 19 16 193 17.5 140 M52 x 2 6 90 85
Unit: mm
4 23
13 17
3
22
Angle
1 16
21 Nominal
18 d d1 L D C N h t H l D2 d3 a L1 L2
Dia. Press.
40 5 40 45 123.5 120 95 4 15 12 193 17.5 140 M52 x 2 5 85 75
40 10 40 45 123.5 140 105 4 19 16 193 17.5 140 M52 x 2 6 100 75
Unit: mm
EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX
Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
SOUTHEAST -- Ft. Lauderdale, FL WEST COAST -- Long Beach, CA
Tel: 954-321-0784 • Fax: 954-321-2591 Tel: 562-633-4141 • Fax: 562-633-3280
info@worldwidemetric.com • www.worldwidemetric.com • sales@worldwidemetric.com
World Wide Metric
0374-05 5/2/05 8:15 AM Page 374
374-05
JIS VALVES
BRONZE HOSE GLOBE &
ANGLE VALVES Nakajima Quick Coupling
F7334 – 5 kgf/cm2 & 10 kgf/cm2 No. Item Material No. Item Material No. Item Material
1 Body BC6 10 Nut C3771BD 19 Coupling Ring BC6
10 13
25 2 Bonnet BC6 11 Stud Bolt C3771BD 20 Set Ring BC6
3
2
3 Hand Wheel FC20 12 Stud Bolt C3771BD 21 Set Screw C2700W
8
6
7 11
4 Disc BC6 13 Split Pin C2600W 22 Chain C2700W
15 12
1 9
5 Disc Nut C3771BD 14 Lock Plate C2600P 23 Gasket Rubber
16
5 21 23 24
6 Gland BC6 15 Packing JIS F7102 24 Gasket JIS F7102
14
18 7 Stem C3771BD 16 Gasket JIS F7102 25 Name Plate C2600P
8 Nut C3771BD 17 Base BC6
22 Connection
19
17 9 Nut C3771BD 18 Cap BC6
4 24
Globe
13 Nominal
25 10
d d’ d1 L D C N h t H l D2 d3 a L1 L2
2 3 Dia. Press.
7
Nominal
d L D C N h t H a D1 S
Dia.
25 25 110 95 75 4 12 10 69 4 58 41
32 32 130 115 90 4 15 12 79 4 66 41
40 40 140 120 95 4 15 12 93 5 75 46
Unit: mm
Nominal
d d1 L D C N h t H l a
Dia.
25 25 30 120 95 75 4 12 10 77 10 4
32 32 37 140 115 90 4 15 12 81 11 4
40 40 45 160 120 95 4 15 12 91 13 5
Unit: mm
375-05
JIS VALVES
Type U Type S
F7387 BRONZE COCKS – 16 kgf/cm2
Type S
Nom. Pipe out. dia. d d3 K H B1 B2
l1 l2 l3 l4
dia. Copper Steel
6 8 & 10 10.5 6 28 28 37 M20 x 1.5 12 65 55 22 30
10 15 17.3 10 40 35 52 M24 x 2 16 73 65 27 41
15 20 21.7 15 45 45 58 M30 x 2 22 92 75 36 46
20 25 27.2 20 50 50 65 M36 x 2 24 104 85 41 50
Unit: mm
Type U
Nom. Pipe out. dia. d L L1 H a d4 H3 B2 B3
l4
dia. Copper Steel
6 8 & 10 10.5 6 56 74 65 55 3 M24 x 2 36 30 32
10 15 17.3 10 80 104 73 65 4 M30 x 2 44 41 36
Unit: mm
Nominal
dia.
d L L1 D C N h t H l a S
3 Way Cock
Type S
Nom. Pipe out. dia. d d’ d3 K H D2 B1 B2 S3
l1 l2 l3
dia. Copper Steel
Type S 6 8 & 10 10.5 6 8 32 32 41 M20 x 1.5 12 100 63 22 30 27
10 15 17.3 10 10 36 35 48 M24 x 2 16 115 80 27 41 30
Unit: mm
Type U
Nom. Pipe out. dia. d d1 L L1 H D2 a B2 S2 S3
l
dia. Copper Steel
6 8 & 10 10.5 6 8 64 82 100 5.5 63 3 30 36 27
10 15 17.3 10 10 72 96 115 7.5 80 3 41 41 30
Type U
Unit: mm
EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX
Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
376-05
377-05
JIS VALVES
CAST IRON (Bronze Trim) & CAST STEEL (SS Trim) GLOBE VALVES
JIS F7307 – 10 kgf/cm2 Cast Iron Globe Valves
JIS F7375 – 10 kgf/cm2 Cast Iron Screw-Down Check Globe Valves
JIS F7319 – 10 kgf/cm2 Cast Steel Globe Valves
JIS F7471 – 10 kgf/cm2 Cast Steel Screw-Down Check Globe Valves
Size d d1 L1 D C No. h Bolt t H F7307 F7375 D2 a d6 d7 (kg)
50 50 58 220 155 120 4 19 M16 20 285 17 15 160 10 TW22 36 19.9
65 65 73 270 175 140 4 19 M16 22 310 22 17 200 11 TW24 38 28.7
80 80 88 300 185 150 8 19 M16 22 320 27 20 200 11 TW24 38 32.4
100 100 111 350 210 175 8 19 M16 24 370 33 25 250 12 TW28 44 48.7
125 125 138 420 250 210 8 23 M20 24 420 42 31 280 13 TW32 50 73.1
150 150 163 490 280 240 8 23 M20 26 470 50 37 315 14 TW36 56 104
200 200 213 570 330 290 12 23 M20 26 555 67 46 355 17 TW42 66 162
250 250 265 740 400 355 12 25 M22 30 680 83 — 450 20 TW48 74 304
300 300 315 840 445 400 16 25 M22 32 770 100 — 500 22 TW52 80 458
Unit: mm
CAST IRON (Bronze Trim) & CAST STEEL (SS Trim) ANGLE VALVES
JIS F7308 – 10 kgf/cm2 Cast Iron Angle Valves
JIS F7376 – 10 kgf/cm2 Cast Iron Screw-Down Check Angle Valves
JIS F7320 – 10 kgf/cm2 Cast Steel Angle Valves
JIS F7472 – 10 kgf/cm2 Cast Steel Screw-Down Check Angle Valves
Size d d1 L1 D C No. h Bolt t H F7308 F7376 D2 a d6 d7 (kg)
50 50 58 120 155 120 4 19 M16 20 255 255 17 15 160 10 TW22 36 18.2
65 65 73 130 175 140 4 19 M16 22 270 260 22 17 200 11 TW24 38 25.4
80 80 88 140 185 150 8 19 M16 22 275 270 27 20 200 11 TW24 38 27.4
100 100 111 160 210 175 8 19 M16 24 315 305 33 25 250 12 TW28 44 40.6
125 125 138 180 250 210 8 23 M20 24 360 350 42 31 280 13 TW32 50 69.9
150 150 163 205 280 240 8 23 M20 26 405 390 50 37 315 14 TW36 56 81.0
200 200 213 230 330 290 12 23 M20 26 475 450 67 46 355 17 TW42 66 125
250 250 265 290 400 355 12 25 M22 30 570 — 83 — 450 20 TW48 74 211
300 300 315 320 445 400 16 25 M22 32 645 — 100 — 500 22 TW52 80 293
350 335 350 360 490 445 16 25 M22 34 710 — 112 — 560 24 TW58 88 386
400 380 403 420 560 510 16 27 M24 36 790 — 127 — 630 26 TW65 97 544
Unit: mm
CAST IRON (Bronze Trim) & CAST STEEL (SS Trim) GATE VALVES
JIS F7364 – 10 kgf/cm2 Cast Iron Gate Valves
JIS F7366 – 10 kgf/cm2 Cast Steel Gate Valves
Size d L D C No. h bolt t H I D1 a d6 d7 (kg)
50 50 200 155 120 4 19 M16 20 300 58 140 9 TW18 28 19.4
65 65 220 175 140 4 19 M16 22 350 74 160 10 TW20 32 27.6
80 80 230 185 150 8 19 M16 22 400 89 180 10 TW22 36 33.0
100 100 250 210 175 8 19 M16 24 450 110 200 11 TW24 38 45.8
125 125 270 250 210 8 23 M20 24 520 136 224 13 TW26 42 65.9
150 150 290 280 240 8 23 M20 26 580 160 250 14 TW28 44 86.0
200 200 320 330 290 12 23 M20 26 700 212 315 16 TW32 50 136
250 250 380 400 355 12 25 M22 30 840 264 400 18 TW38 60 230
300 300 440 445 400 16 25 M22 32 960 315 450 20 TW42 66 331
350 335 500 490 445 16 25 M22 34 1050 352 500 22 TW44 68 433
400 380 590 560 510 16 27 M24 36 1150 396 560 24 TW48 74 597
450 430 640 620 565 20 27 M24 38 1260 447 600 27 TW52 — 704
500 480 710 675 620 20 27 M24 40 1380 499 680 30 TW55 — 901
550 530 780 745 680 20 33 M30 42 1550 551 760 33 TW58 — 1192
600 580 850 795 730 24 33 M30 44 1675 602 800 36 TW62 — 1490
Unit: mm
378-05
JIS VALVES
379-05
330 235 200 8 19 M16 20 171 11 235 39.0 1 Body Cast Iron G5501 FC 20
125 125 (350) (250) (210) (8) (23) (M20) (24) (180) (13) (250) 17 M20 x 1.5 (49.2) 2 Bonnet Cast Iron G5501 FC 20
380 265 230 8 19 M16 22 198 12 265 53.7 3 Disc Cast Bronze H5111 BC 6
150 150 (400) (280) (240) (8) (23) (M20) (26) (205) (14) (275) 20 M24 x 2 (54.9)
4 Seat Cast Bronze H5111 BC 6
200 200 460 320 280 8 23 M20 24 235 15 330 94.4 5 Arm Cast Bronze H5111 BC 6
(480) (330) (290) (12) (23) (M20) (26) (242) (17) (330) 24 M30 x 2 (103)
6 Hinge Pin Brass Bar H3250 C3771BD
550 385 345 12 23 M20 26 290 16 390 28 M36 x 2 150
250 250 (—) (—) (—) ( — ) ( — ) (M — ) (—) (—) (—) (—) (—) (—) (—) 7 Plug Brass Bar H3250 C3771BD
380-05
BUTTERFLY VALVES
These JIS valves are available with JIS, DIN, or ANSI flange drilling
(see flange drilling chart on opposite page).
Specify when ordering.
720F
Flanged
700S
Steel Body
Standard Marine
Butterfly
Butterfly Valve
Valve
700G
Butterfly Valve with Cosine Curve Seat
allowing operation with a small actuator
381-05
382-05
JIS VALVES
JIS F7350 – 5 kgf/cm2 and 10 kgf/cm2 HULL CAST STEEL ANGLE VALVES
Flange Dimension: 10kgf/cm2 Changeable to 5kgf/cm
Size d d1 L1 L2 D C No. h Bolt t H I D2 a D1 d5 d6 (kg)
383-05
C D
384-05
DIN VALVES
DN1000 – 6 BAR FLANGED CAST IRON GATE VALVES
Bolted Bonnet – Inside Screwed Spindle – Bronze Trim
D 40 50 65 80 100 125 150 200 250 300 350 400 450 500
L 140 150 170 180 190 200 210 230 250 270 290 310 330 350
A 150 165 185 200 220 250 285 340 405 460 505 565 615 670
R 3/8” 3/8” 3/8” 3/8” 3/8” 1/2” 1/2” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4” 3/4”
H 230 240 270 310 345 435 510 645 695 810 970 1085 1170 1300
M 140 140 160 160 180 200 200 280 280 325 375 425 425 500
Dimensions in mm / weights in kg
L 140 150 170 180 190 200 210 230 250 270 290 310 350
A 150 165 185 200 220 250 285 340 395 445 505 565 670
H 265 290 305 340 365 420 455 560 640 745 850 935 1135
M 160 160 160 160 200 250 250 250 315 315 400 400 500
Dimensions in mm / weights in kg
385-05
DIN VALVES
DN2002 – 16 BAR FLANGED CAST IRON GLOBE VALVES
Bolted Bonnet – Outside Screw & Yoke – Stainless Steel Trim
L 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850
L1 90 95 100 105 115 125 145 155 175 200 225 250 275 325 375
A 95 105 115 140 150 165 185 200 220 250 285 315 340 405 460
H 184 196 214 225 248 279 324 359 404 465 520 577 665 830 945
H1 160 165 175 185 215 235 270 290 350 410 450 490 560 740 840
M 100 100 125 125 150 150 200 200 225 225 300 300 420 500 500
Wt 3,5 4,3 5,5 7,8 10,2 13,2 21 26,3 40,6 59,8 83 112 136 217 325
Dimensions in mm / weights in kg
L 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850
L1 90 95 100 105 115 125 145 155 175 200 225 250 275 325 375
A 95 105 115 140 150 165 185 200 235 270 300 350 375 450 515
H 227 240 245 250 300 312 350 395 450 520 590 655 750 875 990
H1 217 220 225 250 280 300 340 365 410 460 530 605 690 875 990
M 100 100 125 125 150 150 200 200 250 250 300 420 420 500 575
Dimensions in mm / weights in kg
L 210 210 230 230 260 260 300 340 380 430 500 550
A 100 105 130 140 155 170 195 220 230 265 315 355
H 255 255 255 255 325 325 335 400 455 490 565 650
M 140 140 180 180 200 200 250 280 320 360 400 500
Dimensions in mm / weights in kg
386-05
DIN VALVES
CAST STEEL YOKE S 38.1 111-540/240 Dimensions in millimeters
TYPE GATE VALVES DN D L V Z D1 D2 D3 D6 a f d n Dk I Design Wt.(kg)
40 40 240 418 55 145 110 88 85 18 3 18 4 200 — A 26.5
50 50 250 426 67 160 125 102 95 20 3 18 4 200 — A 30.5
65 70 290 520 86 180 145 122 115 22 3 18 8 250 — A 40
80 80 310 555 95 195 160 138 130 24 3 18 8 250 — A 53
100 100 350 644 120 230 190 162 150 24 3 23 8 250 — A 66
125 125 400 746 145 270 220 188 175 26 3 27 8 315 300 A 103
150 150 450 855 172 300 250 218 200 28 3 27 8 400 340 A 146
200 200 550 1065 225 375 325 280 260 34 3 30 12 450 380 A 223
250 250 650 1268 278 445 385 345 315 38 3 33 12 500 420 B 383
300 300 750 1452 330 510 450 410 365 42 4 33 16 500 440 B 520
350 350 850 1607 363 570 510 465 415 46 4 33 16 560 470 B 700
400 400 950 1837 420 655 585 535 475 50 4 40 16 630 500 B 910
500 500 1150 2239 520 755 670 615 580 52 4 42 20 710 580 B 1448
S 38.1 111-564/264
DN D L V Z D1 D2 D3 D5 D6 a f, f2 d n Dk I Design Wt.(kg)
50 50 250 426 67 175 135 108 88 100 26 3 23 4 200 — A 38
65 70 290 520 86 200 160 132 110 120 26 3 23 8 250 — A 53
80 80 310 555 96 210 170 142 121 135 28 3 23 8 250 — A 66
100 100 350 664 120 250 200 170 150 160 30 3 27 8 315 — A 92
125 125 400 746 145 295 240 — 176 190 34 3 30 8 315 300 A 131
150 150 450 921 175 340 280 — 204 220 36 3 33 8 500 340 B 210
200 200 550 1090 225 405 345 — 260 275 42 3 33 12 500 380 B 333
250 250 650 1335 275 470 400 — 313 325 46 3 36 12 630 420 B 495
300 300 750 1514 330 530 460 — 365 375 52 4 36 16 630 460 B 675
350 350 850 1622 358 595 525 — 422 435 56 4 40 16 630 500 B 911
400 400 950 1837 420 670 585 — 474 485 60 4 42 16 630 530 B 1206
387-05
DIN VALVES
PN10 DIN VERTICAL STORM VALVE
Nominal Pressure: 1 kp/cm2
Test Pressure: 5 kp/cm2
DN t D C nxh L H L1 L2 h s HD
50 18 165 125 4 x 18 200 356 137 110 95 10 100
65 18 185 145 4 x 18 240 396 148 120 95 10 100
80 20 200 160 8 x 18 260 450 174 140 95 10 100
100 20 220 180 8 x 18 300 490 195 155 95 10 100
125 22 250 210 8 x 18 350 572 216 175 95 10 125
150 22 285 240 8 x 22 400 622 242 195 95 10 125
Dimensions in millimeters
DN t1 t2 D1 D2 D3 C1 n x h1 C2 n x h2 L1 R H H2 s HD
50 13 14 165 200 68 125 4 x 18 160 8 x 18 180 R1⁄2” 333 90 10 100
65 14 15 185 220 85 145 4 x 18 180 8 x 18 200 R5⁄8” 341 99 10 100
80 14 15 200 250 100 160 8 x 18 210 8 x 18 215 R3⁄4” 351 108 10 100
100 14 17 220 285 130 180 8 x 18 240 8 x 22 250 R1” 413 130 10 100
125 16 18 250 315 158 210 8 x 18 270 8 x 22 290 R1” 438 152 10 125
150 18 20 285 340 190 240 8 x 22 295 8 x 22 330 R1” 465 176 10 125
Dimensions in millimeters
388-05
H
7
8 Bolt Nut AISI304 4
6
9 Handle AISI304 4
4
10 Plastic Cover Plastic 1
D
G
K
d
3
11 Gland Nut AISI304 1
12 Stem Washer AISI304 1 2
13 Stem Nut AISI304 1 øI x n
L 1
8
Pressure Temperature Rating
for PN 40 Ball Valve 6
1400
90
1200 d K G D H M L b t I/n CV Factor Torque N/M KG
80
15 1/2" 15 65 45 95 49 115 130 14 2 14/4 10 4.3 2.1
1000 m
PRESSURE (BAR)
70
PRESSURE (PSI)
40 m
mm – 3 3/4" 20 75 58 105 52 115 150 16 2 14/4 25 6.5 3.1
2 60
800 50 m
mm m 1" 25 85 68 115 72 152 160 16 2 14/4 35 10.1 4.1
–8 50
600 0m 1-1/4" 32 100 78 140 78 152 180 16 2 18/4 45 15.8 6.0
m 40
400 30
1-1/2" 40 110 88 150 86 186 200 16 3 18/4 80 18.7 7.4
20 2" 50 125 102 165 95 186 230 18 3 18/4 110 23.0 10.5
200
10 2-1/2" 65 145 122 185 130 234 290 21 3 18/8 310 43.0 16.4
0 100 200 300 400 500
3" 80 160 138 200 142 234 310 21 3 18/8 360 220 24.0
TEMPERATURE (°F) Unit: mm unless noted otherwise
389-05
390-05
D A L L1 L2 M N H H1
40 150 165 90 65 140 52 200 175
50 165 185 107 75 140 66 200 185
65 185 220 112 90 160 81 230 200
STOCKING LOCATIONS
LINDEN, NJ
W & O SUPPLY STOCKING LOCATIONS
TAMPA • MOBILE
PHILADELPHIA • NORFOLK P.O. Box 3907 • Jacksonville, FL 32206 NEW ORLEANS • HOUSTON
valve automation
Tel: 800-962-9696 • 904-354-3800
CHARLESTON SAN DIEGO • LONG BEACH
JACKSONVILLE & controls
Fax: 904-355-5542 • www.wosupply.com SEATTLE
FORT LAUDERDALE ANTWERP
jacksonville.fl@wosupply.com
0391-05 5/2/05 10:05 AM Page 391
391-05
D 10 15 20 25 32 40 50 65 80 100
L 70 70 80 90 105 120 140 180 200 230
L1 65 65 70 75 90 100 105 115 125 —
A 90 95 105 115 140 150 165 185 200 220
H 110 115 125 140 155 175 195 225 225 280
H1 105 105 110 125 140 160 180 210 240 —
M 50 60 70 90 90 110 120 160 160 160
392-05
STOCKING LOCATIONS
LINDEN, NJ
W & O SUPPLY STOCKING LOCATIONS
TAMPA • MOBILE
PHILADELPHIA • NORFOLK P.O. Box 3907 • Jacksonville, FL 32206 NEW ORLEANS • HOUSTON
valve automation
Tel: 800-962-9696 • 904-354-3800
CHARLESTON SAN DIEGO • LONG BEACH
JACKSONVILLE & controls
Fax: 904-355-5542 • www.wosupply.com SEATTLE
FORT LAUDERDALE ANTWERP
jacksonville.fl@wosupply.com
0393-05 5/2/05 10:09 AM Page 393
393-05
D 40 50 65 80 100 125 150 200 250 300 350 400 D 40 50 65 80 100 125 150 200 250
L 180 200 230 260 300 350 400 500 600 700 800 900 L 180 200 240 260 300 350 400 500 600
A 150 165 185 200 220 250 285 340 395 445 505 565 A 150 165 185 200 220 250 285 340 405
H 110 117 124 147 157 187 197 246 300 343 386 430 H 130 165 175 190 215 235 265 305 355
Fig. 1101
Fig. 1101
• Working Pressure: D 15 20 25 32 40 50 65 80 100 125 150 175 200
16 Bar – 20°C L 130 150 160 180 200 230 290 310 350 400 480 550 600
• Lift Check A 95 105 115 140 150 165 185 200 220 250 285 315 340
• Horizontal Type H 70 80 85 100 110 115 130 145 165 185 205 235 250
• Cast Iron 2,4 3 3,8 5,7 7,4 10,3 15,2 20,4 31 49 69 101 132
Fig. 101
• Nodular (Ductile) D 15 20 25 32 40 50 65 80 100 125 150 175 200
|ron (Fig. 101) L 130 150 160 180 200 230 290 310 350 400 480 550 600
• Bronze Trim A 95 105 115 140 150 165 185 200 220 250 285 315 340
• PN 16 H 70 70 80 80 85 95 110 130 155 165 215 250 235
Fig. 101
Fig. 95
• Working Pressure:
40 Bar – 20°C
• Lift Check –
Horizontal Type D 15 20 25 32 40 50 65 80 100 125 150 175 200 250 300
• Cast Steel L 130 150 160 180 200 230 290 310 350 400 480 550 600 730 850
• Stainless Trim A 95 105 115 140 150 165 185 200 235 270 300 350 375 450 515
Fig. 95
• PN 40 H 75 75 85 90 100 110 135 140 165 185 210 250 270 295 325
Fig. 68/68rvs
WAFER SWING CHECK
STEEL, STAINLESS, BRONZE
394-05
Contact us for more information, pricing or case histories showing how InduMar’s products reduce maintenance costs.
395-05
DRESSER, INC.
Phone: 814-362-9200
Dresser Piping Specialties
Fax: 814-362-9333
Dresser, Inc. E-mail: dmdsales@dresser.com
41 Fisher Avenue, Bradford, PA 16701 Visit us at: www.dressercouplings.com
0396-05 5/2/05 10:16 AM Page 396
396-05
STRAUB COUPLINGS
REP 1-3 – REPAIR CLAMP WITHOUT AXIAL RESTRAINT FOR ALL PIPE MATERIALS UP TO 20 BAR
Type L, LS Legend:
OD = pipe outside diameter (mm)
OD
4.0 - 1016.0
6.0 8.5 16.0* 16.0* 355.6
3.5 - 1117.6
5.5 7.5 15.0* 16.0* 406.4 3.5/3.5* 8.5* 1219.2
5.0 6.5 13.0* 16.0* 457.2 3.0* 8.0* 1320.8
4.5 6.0 10.0/10.0* 16.0* 508.0 3.0* 7.5* 1422.4
4.0 5.5 9.0 16.0* 558.8 2.5* 7.0* 1524.0
3.5 5.0 8.0 14.0* 609.6 2.5* 6.5* 1625.6
- 4.0 7.0 12.0* 711.2 2.5* 6.0* 1727.2
- 4.0 6.5 12.0* 762.0 2.0* 5.5* 1828.8
- 3.5 6.0 11.0* 812.8 2.0* 5.5* 1930.4
- 3.5 5.5 10.0* 914.4 2.0* 5.0* 2032.0
- 3.0 5.0 9.0* 1016.0
* Two-piece execution
- 2.5 4.5 8.0* 1117.6
- 2.5 4.0 7.0* 1219.2 Notice: Pipe outside diameters larger than 1200 mm on request.
* Two-piece execution CONFORMS TO THE DIN 86128 STANDARD, ABS,
Please specify system pressure & gasket material when ordering LLOYDS, USCG Approved
Remarks: Read fitting/disassembly instructions prior to installation. Test pressure = 1.5 x nominal pressure.
397-05
STRAUB COUPLINGS
GRIP-L – AXIAL RESTRAINT PIPE JOINT FOR ALL METAL PIPES UP TO 16 BAR
Temperature Range EPDM sealing sleeve -20°C up to +80°C
NBR sealing sleeve -20°C up to +80°C
Material: Ø28.9-219.1
Casing Stainless Steel DIN 1.4301 (AISI 316)
Internal Components Stainless Steel
Sealing Sleeve Synthetic rubber to suit application:
OD
Ø244.5-609.6
EPDM (Ethylene-Propylene) for all qualities
of water, waste water, air, solids and chemical
products (chemical resistance on request)
NBR (Nitrile-Butadiene) for gas, oil, water,
fuel and other hydrocarbons.
Locking Parts Stainless Steel;
GRIP-L Ø 26.9 - 60.3 mm with one locking bolt, Ø 76.1 - 609.6 mm with two locking bolts
Steel Strip Insert: Required when gap between pipe ends is excessive, in presence of swelling, vacuum/depression (suction line),
or external pressure. (Must be ordered separately.)
Dimensional data Distance between Locking bolts
Pipe Clamping range Nominal pipe ends RMax.
OD Pressure Coupling Measure Coupling Braced without with torque size thread
PN B C DV KV strip insert rate of M...
(mm) (mm) (bar) (mm) (mm) (mm) (mm) (mm) (Nm) yaw
26.9 26.4 - 27.4 16 46 19 43 70 5 5 7.5 5 6
30.0 29.5 - 30.5 16 46 17 47 75 5 5 7.5 5 6
33.7 33.2 - 34.2 16 46 17 51 75 5 5 7.5 5 6
38.0 37.5 - 38.5 16 61 25 57 90 5 10 15 6 8
42.4 41.9 - 42.9 16 61 25 62 95 5 10 15 6 8
44.5 44.0 - 45.0 16 61 25 64 95 5 10 15 6 8
48.3 47.8 - 48.8 16 61 25 67 100 5 10 15 6 8
54.0 53.5 - 54.5 16 76 37 76 105 10 15 15 6 8
57.0 56.4 - 57.6 16 76 37 76 105 10 15 15 6 8
60.3 59.7 - 60.9 16 76 37 79 110 10 15 15 6 8
73.0 72.3 - 73.7 16 95 41 96 135 10 25 20 6 8
76.1 75.3 - 76.9 16 95 41 98 135 10 25 20 6 8
84.0 83.2 - 84.8 16 95 35 112 145 10 15 20 6 8
88.9 88.0 - 89.8 16 95 41 111 150 10 25 20 6 8
100.6 99.6 - 101.6 16 95 35 129 165 10 15 25 6 8
101.6 100.6 - 102.6 16 95 35 130 165 10 15 25 6 8
104.0 103.0 - 105.0 16 95 35 132 165 10 15 25 6 8
104.8 103.8 - 105.8 16 95 35 133 165 10 15 25 6 8
108.0 106.9 - 109.1 16 95 41 130 165 10 25 25 6 8
114.3 113.2 - 115.4 16 95 41 136 170 10 25 25 6 8
127.0 125.7 - 128.3 16 110 54 151 195 10 35 40 8 10
129.0 127.7 - 130.3 16 110 54 153 195 10 35 40 8 10
130.2 128.9 - 131.5 16 110 54 154 200 10 35 40 8 10
133.0 131.7 - 134.3 16 110 54 157 200 10 35 40 8 10
139.7 138.3 - 141.1 16 110 54 164 210 10 35 40 8 10
141.3 139.9 - 142.7 16 110 54 166 210 10 35 40 8 10
154.0 152.5 - 155.5 13 110 48 184 225 10 30 40 8 10
159.0 157.4 - 160.6 13 110 54 183 225 10 35 40 8 10
168.3 166.6 - 170.0 13 110 54 192 230 10 35 40 8 10
219.1 216.9 - 221.3 10 142 80 250 295 10 35 70 10 12
193.7 192.0 - 195.5 10 141 80 224 270 10 35 50 10 12
200.0 198.0 - 202.0 10 141 80 230 275 10 35 50 10 12
204.0 202.0 - 206.0 10 141 80 234 280 10 35 50 10 12
244.5 242.0 - 247.0 9 141 80 275 320 10 35 50 10 12
250.0 247.5 - 252.5 9 141 80 280 325 10 35 50 10 12
254.0 251.5 - 256.5 9 141 80 284 325 10 35 50 10 12
267.0 264.5 - 269.5 8 141 80 297 340 10 35 50 10 12
273.0 270.5 - 275.5 7 141 80 303 345 10 35 50 10 12
304.0 301.0 - 307.0 6 141 80 334 375 10 35 60 10 12
323.9 320.5 - 327.0 5 141 80 354 395 10 35 60 10 12
355.6 352.0 - 359.0 4 141 80 386 425 10 35 60 10 12
406.4 402.5 - 410.5 3 141 80 436 470 10 35 60 10 12
457.2 452.5 - 461.5 2 141 80 487 520 10 35 60 10 12
508.0 503.5 - 512.5 2 141 80 538 570 10 35 70 10 12
558.8 554.5 - 563.5 2 141 80 589 620 10 35 70 10 12
609.6 605.0 - 614.0 1 141 80 640 670 10 35 70 10 12
Please specify system pressure and gasket material when ordering. Read fitting/disassemble instructions prior to installation.
No special pipe end preparation or tools required • Allows up to 5° axial misalignment. • Conforms to the DIN 86128 standard, ABS, LLOYDS, USCG Approved
398-05
Thickness Size Weight (lbs.) Thickness Size Weight (lbs.) Size Weight (lbs.) Weight (lbs.) Size Weight (lbs.) Weight (lbs.)
Inches Inches Per Sheet Inches Inches Per Sheet Inches Per Foot Per Length Inches Per Foot Per Length
1/16 36x120 89.3 1/16 36x120 89.3 3/16 .1077 1.29 1/32 .297 3.56
1/8 48x120 232.5 1/8 48x120 232.5 1/4 .190 2.28 3/8 .428 5.13
3/16 48x120 348.8 3/16 48x120 348.8 3/8 .428 5.13 1/2 .761 9.13
3/16 60x120 436.0 3/16 60x120 436.0 1/2 .761 9.13 5/8 1.19 14.28
1/4 48x120 465.1 5/8 1.19 14.28 3/4 1.71 20.52
1/4 48x120 465.1
1/4 60x120 581.4 3/4 1.71 20.52 1 3.04 36.48
1/4 60x120 581.4
1/4 72x144 837.2 7/8 2.33 27.96 1-1/4 4.76 57.12
3/8 48x120 697.7
3/8 48x120 697.7 1 3.04 36.48 1-1/2 6.85 82.20
3/8 60x120 872.1 3/8 60x120 872.1 1-1/8 3. 85 46.20 1-3/4 9.32 111.84
3/8 96x168 1953.8 1/2 48x120 931.2 1-1/4 4.76 57.12 2 12.21 146.40
1/2 48x120 931.2 1/2 60x120 1162.8 1-3/8 5.76 93.12 2-1/4 15.4 184.80
1/2 60x120 1162.8 3/4 48x120 1395.3 1-1/2 6.85 82.20 2-1/2 19.0 228.0
1/2 96x168 2604.6 3/4 60x120 1744.2 1-5/8 8.0 96.0 2-3/4 23.0 276.0
5/8 48x120 1162.8 5/8 60x120 1453.5 1-3/4 9.32 11.84 3 27.4 328.8
5/8 60x120 1453.5 1 60x120 2325.6 2 12.2 146.40 3-1/4 32.2 386.40
5/8 96x168 3255.8 2-1/4 15.4 184.80 3-1/2 37.3 447.60
1-1/4 48x120 2325.6
5/8 99x190 3797.3 2-1/2 19.0 228.0 4 48.7 584.40
1-1/2 48x120 2790.72
3/4 48x120 1395.3 3 27.4 328.80 4-1/2 61.6 739.20
1-1/2 60x120 3488.4
3/4 60x120 1744.2 3-1/2 37.3 447.60 5* 76.1 913.20
1 48x120 1860.4 2 48x120 3721.0 4 48.7 584.40 5-1/8* 79.96 959.52
1 60x120 2325.6 2 60x120 4651.2 4-1/4* 55.36 664.32 5-1/4* 83.91 1,006.9
1-1/8 60x120 2616.3 2-1/2 48x120 4651.2 4-1/2* 61.6 739.20 6* 110 1,320.0
1-1/4 48x120 2325.6 5* 76.1 913.20 6-1/8* 114.21 1,370.5
1-1/4 60x120 2907.0 6* 110.0 1,320.0 8* 195 2,340.0
1-1/2 48x120 2790.7 8* 195.0 2,340.0 10* 304.42 3,653.0
1-1/2 60x120 3488.4 9* 248.0 2,976.0 12’ Lengths 060 Soft
1-3/4 48x120 3255.8 12’ Lengths 060 Soft *Supplied in 6' random lengths.
2 48x120 3720.9 *Supplied in 6' random lengths.
2-1/4 48x120 4186.0
2-1/2 48x120 4651.2
3 48x96 4465.1
399-05
ALLOY 110
ALLOY 145
ALLOY 172
ALLOY 182
ALLOY 360
ALLOY 464
ALLOY 614
ALLOY 624
ALLOY 630
ALLOY 655
ALLOY 706
ALLOY 715
ALLOY 102
ALLOY 110
ALLOY 145
ALLOY 172
ALLOY 182
ALLOY 360
ALLOY 464
ALLOY 614
ALLOY 624
ALLOY 630
ALLOY 655
ALLOY 706
ALLOY 715
RWMA CLASS II
RWMA CLASS II
1018 CR.
1018 CR.
ASTM-B-187
ASTM-B-187
ASTM-B-124
ASTM-B-196
ASTM-B-150
ASTM-B-150
ASTM-B-150
ASTM-B-151
ASTM-B-151
ASTM-B-187
ASTM-B-187
ASTM-B-124
ASTM-B-196
ASTM-B-150
ASTM-B-150
ASTM-B-150
ASTM-B-151
ASTM-B-151
ASTM-B-16
ASTM-B-21
ASTM-B-16
ASTM-B-21
AMS 4640
AMS 4640
ROUNDS ROUNDS
.016 ✔ 1.750 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
.0937 ✔ 1.875 ✔ ✔ ✔
.125 ✔ ✔ ✔ 2.00 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
.1562 ✔ 2.125 ✔ ✔ ✔ ✔
.1875 ✔ ✔ ✔ ✔ 2.250 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
.2187 ✔ 2.375 ✔ ✔
.250 ✔ ✔ ✔ ✔ ✔ ✔ ✔ 2.50 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
.2812 ✔ 2.625 ✔ ✔ ✔
.3125 ✔ ✔ ✔ ✔ ✔ 2.750 ✔ ✔ ✔ ✔ ✔
.3437 ✔ 2.875 ✔ ✔
.375 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 3.00 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
.4375 ✔ ✔ ✔ ✔ 3.125 ✔ ✔
.4687 ✔ 3.250 ✔ ✔ ✔ ✔ ✔
.500 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 3.500 ✔ ✔ ✔ ✔ ✔
.5313 ✔ 3.625 ✔ ✔ ✔
.5625 ✔ ✔ ✔ ✔ ✔ 3.750 ✔ ✔ ✔
.625 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 4.00 ✔ ✔ ✔ ✔ ✔
.6875 ✔ ✔ ✔ 4.250 ✔
.750 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 4.50 ✔ ✔ ✔ ✔ ✔ ✔
.8125 ✔ ✔ ✔ 5.00 ✔ ✔ ✔
.875 ✔ ✔ ✔ ✔ ✔ ✔ ✔ 5.25 ✔
.9375 ✔ 5.50 ✔
1.00 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 6.00 ✔ ✔ ✔
1.0625 ✔ 7.00 ✔ ✔
1.125 ✔ ✔ ✔ ✔ ✔ ✔ ✔ 8.00 ✔
1.250 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ 9.00 ✔
1.3125 ✔
1.375 ✔ ✔ ✔ ✔ ✔ ✔
1.4375 ✔
1.50 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
1.625 ✔ ✔ ✔
1.6875 ✔ ✔
FREE CUTTING BRASS
NAVAL BRASS
NAVAL BRASS
ALLOY 464
ALLOY 360
ALLOY 360
ALLOY 464
ALLOY 360
ALLOY 360
ALLOY 464
ALLOY 360
ALLOY 360
SQUARE
SQUARE
SQUARE
ASTM-B-21
ASTM-B-16
ASTM-B-16
ASTM-B-21
ASTM-B-16
ASTM-B-16
ASTM-B-21
ASTM-B-16
ASTM-B-16
HEX HEX HEX
HEX
HEX
HEX
HEX
HEX
HEX
HEX
3/16 ✔ ✔ .8125 ✔ 1-3/4 ✔ ✔ ✔
1/4 ✔ ✔ ✔ 7/8 ✔ ✔ 1-7/8 ✔ ✔
5/16 ✔ ✔ 1 ✔ ✔ 2 ✔ ✔ ✔
3/8 ✔ ✔ ✔ 1-1/16 ✔ 2-1/8
7/16 ✔ 1-1/8 ✔ ✔ 2-1/4 ✔ ✔ ✔
1/2 ✔ ✔ ✔ 1-3/16 ✔ 2-1/2 ✔ ✔ ✔
9/16 ✔ 1-1/4 ✔ ✔ ✔ 2-3/4
SQUARE 5/8 ✔ ✔ ✔ 1-3/8 ✔ ✔ 3 ✔ ✔ ✔
12 Ft. Lengths 11/16 ✔ 1-1/2 ✔ ✔ ✔ 3-1/2 ✔ ✔
or cut to your specifications 3/4 ✔ ✔ ✔ 1-5/8 ✔ ✔
?? ?
Having trouble finding THE PRODUCTS
???
(Be sure to mention the page number, the item number and which edition of MARINER’S ANNUAL is being referenced.)
ON THIS PAGE? We can help!
E-mail your request to info@marinersannual.com
or fax us at 215-862-5864
0400-05 5/2/05 10:26 AM Page 400
400-05
CLASS 3000
COPPER NICKEL Nominal
Pipe
Pipe
End Wall
Water
Way
Male
Flange Nut
Threads
Per Inch
Length Clear
Bearing Assembly Assembly
THREADED UNIONS Size Min.
A
Min.
C
Bore
D
Min.
F
Min.
G
Max.
H
Min. Nominal
J L
Nut
N
0.269
1/8 0.58 0.095 0.125 0.125 16 0.049 1.63 2.0
0.253
0.388
1/4 0.75 0.119 0.125 0.125 16 0.049 1.63 2.0
0.372
0.548
3/8 0.90 0.126 0.135 0.135 14 0.054 1.81 2.2
0.532
0.688
1/2 1.09 0.147 0.145 0.145 14 0.059 1.93 2.3
0.672
0.858
3/4 1.32 0.154 0.160 0.160 11 0.066 2.24 2.6
0.842
1.108
1 1.63 0.179 0.180 0.175 11 0.073 2.44 3.1
1.092
1.408
1-1/4 1.99 0.191 0.210 0.205 11 0.084 2.80 3.7
1.392
1.638
1-1/2 2.25 0.200 0.230 0.220 10 0.091 3.01 4.4
1.622
2.068
2 2.76 0.218 0.260 0.250 10 0.106 3.39 5.2
2.052
2.548
2-1/2 3.36 0.276 0.295 0.280 8 0.121 4.03 5.9
2.532
3.058
3 4.03 0.300 0.325 0.315 8 0.139 4.29 6.9
3.042
Union Dimensions are in accordance with MSS-SP-83
401-05
COPPER
NICKEL
SOCKET-
WELDING
FITTINGS
90° ELBOW TEE CROSS 45° ELBOW
3000 #
Bore Socket Depth Center to Bottom of Laying Lengths End
Nominal Socket Diameter Wall of Socket – A Wall
Pipe Bore of Thickness Body Socket 90° Elbows, Half Tolerances ± Thickness
Size Diameter Fittings C Wall Min. Tees, and 45° Couplings Couplings Min.
B D Ave. Min. G J Crosses Elbows E F A E F K
1/8 0.440 0.299 0.125 0.125 0.095 0.38 0.44 0.31 0.25 0.62 0.03 0.06 0.03 0.19
COUPLING 0.420 0.239
1/4 0.575 0.394 0.149 0.130 0.119 0.38 0.44 0.31 0.25 0.62 0.03 0.06 0.03 0.19
0.555 0.334
3/8 0.710 0.523 0.158 0.138 0.126 0.38 0.53 0.31 0.25 0.69 0.06 0.12 0.06 0.19
0.690 0.463
1/2 0.875 0.652 0.184 0.161 0.147 0.38 0.62 0.44 0.38 0.88 0.06 0.12 0.06 0.25
0.855 0.592
3/4 1.085 0.854 0.193 0.168 0.154 0.50 0.75 0.50 0.38 0.94 0.06 0.12 0.06 0.25
1.065 0.794
1 1.350 1.079 0.224 0.196 0.179 0.50 0.88 0.56 0.50 1.12 0.08 0.16 0.08 0.38
1.330 1.019
HALF COUPLING 1-1/4 1.695 1.410 0.239 0.208 0.191 0.50 1.06 0.69 0.50 1.19 0.08 0.16 0.08 0.38
1.675 1.350
1-1/2 1.935 1.640 0.250 0.218 0.200 0.50 1.25 0.81 0.50 1.25 0.08 0.16 0.08 0.44
1.915 1.580
2 2.426 2.097 0.273 0.238 0.218 0.62 1.50 1.00 0.75 1.62 0.08 0.16 0.08 0.50
2.406 2.037
2-1/2 2.931 2.529 0.345 0.302 0.276 0.62 1.62 1.12 0.75 1.69 0.10 0.20 0.10 0.62
2.906 2.409
3 3.560 3.128 0.375 0.327 0.300 0.62 2.25 1.25 0.75 1.75 0.10 0.20 0.10 0.75
3.535 3.008
4 4.570 4.086 0.421 0.368 0.337 0.75 2.62 1.62 0.75 1.88 0.10 0.20 0.10 0.88
CAP 4.545 3.966
All units are inches.
CLASS 3000
COPPER NICKEL Nominal PipeSocket Socket Water Male Threads Depth of Length Clear
Pipe End Bore Wall Way Laying Flange Nut Per Inch Bearing Socket Assembly Assembly
SOCKET WELD UNIONS Size Min. Dia. Min. Bore Length Min. Min. Max. Min. Min. Nominal Nut
A B C D E F G H J K L N
1/8 0.86 0.430 0.125 0.269 0.88 0.125 0.125 16 0.049 0.38 1.63 2.0
0.420 0.253 0.75
1/4 0.86 0.565 0.130 0.388 0.88 0.125 0.125 16 0.049 0.38 1.63 2.0
0.555 0.372 0.75
3/8 1.02 0.700 0.138 0.548 1.06 0.135 0.135 14 0.054 0.38 1.81 2.2
0.690 0.532 0.81
1/2 1.23 0.865 0.161 0.688 1.06 0.145 0.145 14 0.059 0.38 1.93 2.3
0.855 0.672 0.81
3/4 1.46 1.075 0.168 0.858 1.25 0.160 0.160 11 0.066 0.50 2.24 2.6
1.065 0.842 1.00
1 1.79 1.340 0.196 1.108 1.35 0.180 0.175 11 0.073 0.50 2.44 3.1
1.330 1.092 1.03
1-1/4 2.16 1.685 0.208 1.408 1.60 0.210 0.205 11 0.084 0.50 2.80 3.7
1.675 1.392 1.28
1-1/2 2.42 1.925 0.218 1.638 1.66 0.230 0.220 10 0.091 0.50 3.01 4.4
1.915 1.622 1.34
2 2.96 2.416 0.238 2.068 1.79 0.260 0.250 10 0.106 0.62 3.39 5.2
2.406 2.052 1.47
2-1/2 3.61 2.921 0.302 2.548 2.43 0.295 0.280 8 0.121 0.62 4.03 5.9
2.906 2.532 2.06
3 4.30 3.550 0.327 3.058 2.51 0.325 0.315 8 0.139 0.62 4.29 6.9
3.535 3.042 2.11
Union Dimensions are in accordance with MSS-SP-83 All units are inches.
?? ?
Having trouble finding THE PRODUCTS
402-05
403-05
404-05
405-05
90° ELBOWS SIZE PIPE SIZE HEX BUSHINGS SIZE PIPE SIZE STANDARD SIZE PIPE SIZE
CODE IN INCHES CODE IN INCHES UNIONS CODE IN INCHES
040 1/4 039 1/4 x 1/8 125 Lbs. W.S.P. 020 1/8
060 3/8 058 3/8 x 1/8 200 Lbs. non-shock W.O.G.
GROUND JOINT 040 1/4
100 1/2 059 3/8 x 1/4 060 3/8
150 3/4 097 1/2 x 1/8 100 1/2
200 1 098 1/2 x 1/4 150 3/4
250 1-1/4 200 1
099 1/2 x 3/8
300 1-1/2 250 1-1/4
146 3/4 x 1/8
400 2 300 1-1/2
147 3/4 x 1/4
450 2-1/2 400 2
148 3/4 x 3/8
Fig. 4101 500 3
149 3/4 x 1/2
600 4
Fig. 4171 195 1 x 1/8
700 6
196 1 x 1/4 Fig. No. 4401 (Rough)
750 8
197 1 x 3/8
198 1 x 1/2
199 1 x 3/4
90° STREET SIZE PIPE SIZE 246 1-1/4 x 3/8
ELBOWS CODE IN INCHES 247 1-1/4 x 1/2
040 1/4 248 1-1/4 x 3/4 250 LBS. SIZE PIPE SIZE
060 3/8 249 1-1/4 x 1 UNIONS CODE IN INCHES
100 1/2 295 1-1/2 x 3/8
250 Lbs. W.S.P. 020 1/8
150 3/4 296 1-1/2 x 1/2 400 Lbs. non-shock W.O.G.
GROUND JOINT 040 1/4
200 1 297 1-1/2 x 3/4 060 3/8
250 1-1/4 298 1-1/2 x 1 100 1/2
300 1-1/2 299 1-1/2 x 1-1/4 150 3/4
400 2 393 2 x 1/4 200 1
500 3
395 2 x 1/2 250 1-1/4
Fig. 4103 396 2 x 3/4 300 1-1/2
397 2x1 400 2
398 2 x 1-1/4 450 2-1/2
399 2 x 1-1/2 500 3
446 2-1/2 x 1
45° ELBOWS SIZE PIPE SIZE 447 2 -1/2 x 1-1/4 Fig. No. 4421 (Rough)
CODE IN INCHES 449 2 -1/2 x 2
040 1/4 495 3x1
060 3/8 496 3 x 1-1/4
100 1/2 497 3 x 1-1/2
150 3/4 498 3x2
200 1 499 3 x 2-1/2
250 1-1/4 549 3-1/2 x 3
300 1-1/2
400 2 250 LBS. 90° SIZE PIPE SIZE
450 2-1/2 UNION ELBOWS CODE IN INCHES
Fig. 4102
500 3 250 Lbs. W.S.P. 060 3/8
600 4 400 Lbs. non-shock W.O.G.
GROUND JOINT 100 1/2
CROSSES SIZE PIPE SIZE 150 3/4
CODE IN INCHES 200 1
040 1/4 300 1-1/2
TEES SIZE PIPE SIZE 400 2
CODE IN INCHES 060 3/8
100 1/2
040 1/4 150 3/4
060 3/8 200 1
100 1/2 250 1-1/4
150 3/4 300 1-1/2
200 1 400 2
250 1-1/4 450 2-1/2 Fig. No. 4408 (Rough)
300 1-1/2 Fig. 4135 500 3
400 2 600 4
450 2-1/2
500 3
Fig. 4121 600 4
700 6
406-05
90° ELBOWS SIZE PIPE SIZE 45° ELBOWS SIZE PIPE SIZE REDUCING TEES SIZE PIPE SIZE
CODE IN INCHES CODE IN INCHES CODE IN INCHES
020 1/8 040 • 1/4 054 • 3/8 x 1/4 x 1/4
040 • 1/4 060 • 3/8 055 3/8 x 1/4 x 3/8
060 • 3/8 100 • 1/2 059 • 3/8 x 3/8 x 1/4
100 • 1/2 150 • 3/4 061 • 3/8 x 3/8 x 1/2
150 • 3/4 200 • 1 078 • 1/2 x 1/4 x 1/4
200 • 1 250 • 1-1/4 080 • 1/2 x 1/4 x 1/2
250 • 1-1/4 300 • 1-1/2 089 • 1/2 x 3/8 x 3/8
300 • 1-1/2 400 • 2 090 1/2 x 3/8 x 1/2
400 • 2 450 • 2-1/2 098 • 1/2 x 1/2 x 1/4
450 • 2-1/2 500 • 3 099 • 1/2 x 1/2 x 3/8
Face- 500 • 3 Face- 550 • 3-1/2 101 • 1/2 x 1/2 x 3/4
Fed Grooved 550 • 3-1/2 Fed Grooved 600 • 4 102 1/2 x 1/2 x 1
Face-
FFxFF Fig. 5001 5101 600 • 4 FFxFF Fig. 5004 5104 650 • 5 Fed Grooved 120 3/4 x 1/4 x 3/4
FFxFEM Fig. 5002 5102 650 • 5 700 • 6 FFxFFxFF Fig. 5021 5121 128 • 3/4 x 3/8 x 3/8
700 • 6 750 • 8 FFxFEMxFF Fig. 5022 5122 130 • 3/4 x 3/8 x 3/4
FFxFFxFEM Fig. 5023 5123
750 • 8 800 • 10 138 3/4 x 1/2 x 3/8
800 • 10 820 • 12 139 • 3/4 x 1/2 x 1/2
820 • 12 140 • 3/4 x 1/2 x 3/4
45° STREET SIZE PIPE SIZE 147 • 3/4 x 3/4 x 1/4
90° REDUCING SIZE PIPE SIZE
ELBOWS CODE IN INCHES 148 • 3/4 x 3/4 x 3/8
ELBOWS CODE IN INCHES 150 3/4 149 • 3/4 x 3/4 x 1/2
300 1-1/2 151 • 3/4 x 3/4 x 1
039 1/4 x 1/8 165 1 x 1/4 x 1
059 • 3/8 x 1/4 170 • 1 x 3/8 x 1
098 1/2 x 1/4 178 • 1 x 1/2 x 1/2
099 1/2 x 3/8
148 • 3/4 x 3/8 179 • 1 x 1/2 x 3/4
180 • 1 x 1/2 x 1
149 • 3/4 x 1/2 187 • 1 x 3/4 x 3/8
197 1 x 3/8 188 • 1 x 3/4 x 1/2
198 • 1 x 1/2 189 • 1 x 3/4 x 3/4
199 • 1 x 3/4
Grooved 196 • 1 x 1 x 1/4
247 • 1-1/4 x 1/2
FFxMale FF Fig. 5109 197 • 1 x 1 x 3/8
Face- 248 • 1-1/4 x 3/4
Fed Grooved 198 • 1 x 1 x 1/2
249 • 1-1/4 x 1 199 • 1 x 1 x 3/4
FFxFF Fig. 5001 5101 298 • 1-1/2 x 1
FFxFEM Fig. 5002 5102 90° STREET SIZE PIPE SIZE 201 • 1 x 1 x 1-1/4
299 • 1-1/2 x 1-1/4 ELBOWS CODE IN INCHES 202 1 x 1 x 1-1/2
FEMxFF Fig. 5003 5103 397 • 2x1
040 1/4 218 • 1-1/4 x 1/2 x 1
398 2 x 1-1/4 219 1-1/4 x 1/2 x 1-1/4
399 2 x 1-1/2 060 3/8
100 1/2 223 • 1-1/4 x 3/4 x 3/4
448 2-1/2 x 1-1/2 224 • 1-1/4 x 3/4 x 1
449 • 2-1/2 x 2 150 3/4
225 • 1-1/4 x 3/4 x 1-1/4
498 3x2 200 • 1
250 • 1-1/4 232 1-1/4 x 1 x 1/2
499 3 x 2-1/2 233 • 1-1/4 x 1 x 3/4
597 4 x 2-1/2 300 • 1-1/2
400 2 234 • 1-1/4 x 1 x 1
598 4x3 235 • 1-1/4 x 1 x 1-1/4
599 4 x 3-1/2 246 • 1-1/4 x 1-1/4 x 3/8
698 • 6x4
Grooved 247 • 1-1/4 x 1-1/4 x 1/2
FFxMale FF Fig. 5107 248 • 1-1/4 x 1-1/4 x 3/4
FFxMale TH Fig. 5108 249 • 1-1/4 x 1-1/4 x 1
251 1-1/4 x 1-1/4 x 1-1/2
90° LONG TURN SIZE PIPE SIZE
265 • 1-1/2 x 1/2 x 1-1/2
ELBOWS CODE IN INCHES
TEES SIZE PIPE SIZE 267 • 1-1/2 x 3/4 x 3/4
040 • 1/4 CODE IN INCHES 268 • 1-1/2 x 3/4 x 1
060 • 3/8 269 • 1-1/2 x 3/4 x 1-1/4
100 • 1/2 020 1/8
040 • 1/4 270 • 1-1/2 x 3/4 x 1-1/2
150 • 3/4 276 1-1/2 x 1 x 1/2
200 • 1 060 • 3/8
100 • 1/2 277 1-1/2 x 1 x 3/4
250 • 1-1/4 150 • 3/4 278 • 1-1/2 x 1 x 1
300 • 1-1/2 279 • 1-1/2 x 1 x 1-1/4
400 • 2 200 • 1
250 • 1-1/4 280 • 1-1/2 x 1 x 1-1/2
450 • 2-1/2 281 1-1/2 x 1 x 2
500 • 3 300 • 1-1/2
400 • 2 286 • 1-1/2 x 1-1/4 x 1/2
550 • 3-1/2 450 • 2-1/2 287 • 1-1/2 x 1-1/4 x 3/4
Grooved 600 • 4
FFxFF Fig. 5111 Face- 500 • 3 288 • 1-1/2 x 1-1/4 x 1
650 • 5 289 • 1-1/2 x 1-1/4 x 1-1/4
700 • 6 Fed Grooved 550 • 3-1/2
FFxFFxFF Fig. 5021 5121 600 • 4 290 • 1-1/2 x 1-1/4 x 1-1/2
750 • 8 FFxFEMxFF Fig. 5022 5122 650 • 5 295 • 1-1/2 x 1-1/2 x 3/8
FFxFFxFEM Fig. 5023 5123
700 • 6 296 • 1-1/2 x 1-1/2 x 1/2
750 • 8 297 • 1-1/2 x 1-1/2 x 3/4
800 • 10 298 • 1-1/2 x 1-1/2 x 1
820 • 12 299 • 1-1/2 x 1-1/2 x 1-1/4
407-05
408-05
REDUCING SIZE PIPE SIZE CLOSE PATTERN SIZE PIPE SIZE BUSHINGS SIZE PIPE SIZE
COUPLINGS CODE IN INCHES RETURN BENDS CODE IN INCHES CODE IN INCHES
(Cont’d.) 497 3 x 1-1/2 150 3/4 059 • 3/8 x 1/4
498 • 3x2 250 1-1/4 097 1/2 x 1/8
499 • 3 x 2-1/2 300 • 1-1/2 098 • 1/2 x 1/4
547 3-1/2 x 2 400 • 2 099 • 1/2 x 3/8
548 • 3-1/2 x 2-1/2 147 3/4 x 1/4
549 • 3-1/2 x 3 148 • 3/4 x 3/8
596 4x2 149 • 3/4 x 1/2
597 4 x 2-1/2 Grooved
FFxFF Fig. 5155 196 1 x 1/4
598 • 4x3
599 • 4 x 3-1/2 197 1 x 3/8
198 • 1 x 1/2
647 5x3 OPEN PATTERN SIZE PIPE SIZE
RETURN BENDS CODE IN INCHES 199 • 1 x 3/4
648 • 5 x 3-1/2 Face-
696 6x3 Fed Grooved 245 1-1/4 x 1/4
200 • 1 Male FFxFF Fig. 5057 5157 246 1-1/4 x 3/8
698 • 6x4
Face- 250 • 1-1/4 Male FFxFEM Fig. 5058 247 1-1/4 x 1/2
699 6x5
Fed Grooved 300 1-1/2 248 • 1-1/4 x 3/4
FFxFF Fig. 5050 5150 749 8x6
799 10 x 8 400 2 249 • 1-1/4 x 1
FFxFEM Fig. 5051 5151
819 12 x 10 450 2-1/2
294 1-1/2 x 1/4
500 3
Grooved 295 1-1/2 x 3/8
600 4
FFxFF Fig. 5156 296 1-1/2 x 1/2
45° “Y” BRANCHES SIZE PIPE SIZE 297 1-1/2 x 3/4
CODE IN INCHES 298 • 1-1/2 x 1
ADAPTERS SIZE PIPE SIZE
100 • 1/2 CODE IN INCHES 299 • 1-1/2 x 1-1/4
150 • 3/4 393 2 x 1/4
040 1/4 394 2 x 3/8
200 • 1
060 3/8 395 2 x 1/2
250 • 1-1/4
100 1/2 396 2 x 3/4
300 • 1-1/2
150 3/4
400 • 2 200 1 397 2x1
450 • 2-1/2 398 • 2 x 1-1/4
250 1-1/4 399 • 2 x 1-1/2
500 • 3
300 1-1/2 444 2-1/2 x 1/2
550 • 3-1/2 Face-Fed Grooved
400 2 445 2-1/2 x 3/4
600 • 4 FFxMale TH Fig. 5060 5160
450 2-1/2
Grooved 650 • 5 500 3 448 • 2-1/2 x 1-1/2
FFxFFxFF Fig. 5140 700 • 6 600 4 449 • 2-1/2 x 2
750 • 8 497 3 x 1-1/2
ADAPTERS SIZE PIPE SIZE 498 • 3x2
CODE IN INCHES 499 • 3 x 2-1/2
45° REDUCING SIZE PIPE SIZE 544 3-1/2 x 1
“Y” BRANCHES CODE IN INCHES 041 1/4 x 3/8
061 3/8 x 1/2 546 3-1/2 x 1-1/2
198 1 x 1 x 1/2 151 3/4 x 1 547 3-1/2 x 2
199 1 x 1 x 3/4 201 1 x 1-1/4 548 • 3-1/2 x 2-1/2
234 1-1/4 x 1 x 1 251 1-1/4 x 1-1/2 549 • 3-1/2 x 3
280 1-1/2 x 1 x 1-1/2 302 1-1/2 x 2 595 4 x 1-1/2
296 1-1/2 x 1-1/2 x 1/2 401 2 x 2-1/2 596 4x2
297 1-1/2 x 1-1/2 x 3/4 Face-Fed Grooved 598 • 4x3
298 1-1/2 x 1-1/2 x 1 FFxMaleTH Fig. 5061 5161 599 • 4 x 3-1/2
299 1-1/2 x 1-1/2 x 1-1/4 One Size Larger 646 5 x 2-1/2
370 2x1x2 649 • 5x4
389 2 x 1-1/2 x 1-1/2 ADAPTERS SIZE PIPE SIZE 694 6x2
CODE IN INCHES 695 6 x 2-1/2
Face- 390 2 x 1-1/2 x 2
FedGrooved 397 2x2x1 040 1/4 697 6 x 3-1/2
FFxFFxFF Fig. 5040 5140 398 2 x 2 x 1-1/4 060 3/8 699 6x5
399 2 x 2 x 1-1/2 100 1/2 747 8x4
439 2-1/2 x 2 x 2 150 3/4 748 8x5
200 1 749 8x6
446 2-1/2 x 2-1/2 x 1
448 2-1/2 x 2-1/2 x 1-1/2 250 1-1/4 799 10 x 8
449 2-1/2 x 2-1/2 x 2 300 1-1/2
480 3x2x3 400 2
488 3 x 2-1/2 x 2 Grooved 500 3
FEMxMale TH Fig. 5063 600 4
497 3 x 3 x 1-1/2
498 3x3x2 PLUGS
CAPS SIZE PIPE SIZE SIZE PIPE SIZE
499 3 x 3 x 2-1/2 CODE IN INCHES
CODE IN INCHES
547 3-1/2 x 3-1/2 x 2
589 4x3x3 040 1/4 CORED – FF x Male TH – 5064
060 3/8 Grooved
596 4 x4x2 100 1/2 450 2-1/2
598 4x4x3 150 3/4
200 1 SOLID – FF 5065
250 1-1/4 100 1/2
300 1-1/2 150 3/4
400 2 200 1
500 3 250 1-1/4
550 3-1/2 300 1-1/2
600 4 400 2
650 5
FF 5154 Grooved 700 6 600 4
with Ring 750 8
409-05
90° LONG
TURN ELL TEE
90° ELL 45° ELL REDUCING TEE
90/10 CuNi 6801 90/10 CuNi 6804 90/10 CuNi 6811 90/10 CuNi 6821
70/30 CuNi 6901 70/30 CuNi 6904 70/30 CuNi 6911 70/30 CuNi 6921
These low pressure Cu-Ni cast socket weld fittings and flanges are resistant to corrosion in systems handling a variety
of liquid and chemical products.
Specify item and size when ordering. Sizes: 1/2", 3/4", 1", 1-1/4", 2", 2-1/2"
410-05
90° Elbow Long Radius 90° Elbow Short Radius 45° Elbow Tee Single Sweep Tee
601111 601101 601104 601121 601130
Double Sweep Tee 45° Lateral Concentric Reducer 180° Return Bend Sleeve
601133 601140 601150 601156 601155
1/4 .540 .065 9/32 1-9/32 1-5/32 45/64 2 11/16 - - - - .540 +- .003 17/32
.000
3/8 .675 .065 3/8 1-5/8 1-7/16 57/64 2-1/2 29/32 - - - 1-1/4 .675 +- .003 5/8
.000
1/2 .840 .065 7/16 1-15/16 1-11/16 1-1/16 3 1-3/32 - - - 1-1/2 .840 +- .003 3/4
.000
3/4 1.050 .065 15/32 1-19/32 1-7/32 1-5/16 2-1/4 1-1/4 - - - 1-1/2 1.050 +- .003 13/16
.000
1 1.315 .065 1/2 2 1-1/2 1-1/8 3 1-1/2 - 5-3/4 1-3/4 2 1.315 +- .003 7/8
.000
1-1/4 1.660 .072 9/16 2-7/16 1-13/16 1-11/32 3-3/4 1-7/8 - 6-1/4 1-3/4 2 1.660 +- .003 1
.000
1-1/2 1.900 .072 11/16 2-15/16 2-3/16 1-5/8 4-1/2 2-1/4 - 7 2 2-1/2 1.900 +- .005 1-1/4
.000
2 2.375 .083 23/32 3-23/32 2-23/32 1-31/32 6 2-1/2 - 8 2-1/2 3 2.375 +- .005 1-5/16
.000
2-1/2 2.875 .083 7/8 4-5/8 3-3/8 2-7/16 7-1/2 3 2 9-1/2 2-1/2 3-/12 2.875 +- .007 1-9/16
.000
3 3.500 .095 29/32 5-13/32 3-29/32 2-49/64 9 3-3/8 2-1/2 10 3 3-/12 3.500 +- .007 1-21/32
.000
3-1/2 4.000 .095 15/16 6-1/4 4-7/16 3-11/64 10-1/2 3-3/4 2-3/4 11-1/2 3 4 4.000 +- .007 1-3/4
.000
4 4.500 .109 31/32 6-31/32 4-31/32 3-29/64 12 4-1/8 3 12 3 4 4.500 +- .007 1-13/16
.000
5 5.563 .125 1-3/32 8-19/32 6-3/32 4-13/64 15 4-7/8 4 13-1/2 3-1/2 5 5.563 +- .007 2-1/16
.000
6 6.625 .134 1-11/64 10-11/64 7-11/64 4-29/32 18 5-5/8 5 14-1/2 3-1/2 5-1/2 6.625 +- .007 2-7/32
.000
7 7.625 .134 1-9/32 11-25/32 8-9/32 5-5/8 21 6-5/16 - - - 6 7.625 +- .007 2-7/16
.000
8 8.625 .148 1-3/8 13-3/8 9-3/8 6-11/32 24 7 7-1/2 17-1/2 4-1/2 6 8.625 +- .007 2-5/8
.000
9 9.625 .187 1-9/16 15-1/16 10-9/16 7-5/32 27 7-3/4 - - - 7 9.625 +- .007 3
.000
10 10.750 .187 1-9/16 16-9/16 11-9/16 7-25/32 30 8-1/2 - - - 7 10.750 +- .007 3
.000
12 12.750 .250 1-11/16 19-11/16 13-11/16 9-9/64 36 10 - - - 8 12.750 +- .007 3-1/4
.000
All dimensions are in inches.
STOCKING LOCATIONS
LINDEN, NJ
W & O SUPPLY STOCKING LOCATIONS
TAMPA • MOBILE
PHILADELPHIA • NORFOLK P.O. Box 3907 • Jacksonville, FL 32206 NEW ORLEANS • HOUSTON
CHARLESTON Tel: 800-962-9696 • 904-354-3800 SAN DIEGO • LONG BEACH
JACKSONVILLE Fax: 904-355-5542 • www.wosupply.com SEATTLE
FORT LAUDERDALE ANTWERP
jacksonville.fl@wosupply.com
0411-04 5/2/05 12:41 PM Page 1
411-05
BESTWELD, INC.
BELLED-END FITTINGS
IPS Sizes: 1/2", 3/4", 1", 1-1/4”, 1-1/2", 2", 2-1/2", 3", 3-1/2", 4", 5", 6", 8", 10", 12"
Pressure Rating: 200 psi (S10), 700 psi (S40S)
Burst Pressure Rating: IAW ANSI B16.9 Design Proof Testing
Systems: Firemain, Seawater, Cooling, Lube Oil, Exhaust, Steam
Welding: TIG w/Helium or Argon shield, No ID Purge needed
Titanium Aluminum
Alloys: Gr2, Gr7 Alloys: 5083, 5086, 6061/6063
Specifications: MSS SP119, Specifications: MSS SP119,
ASTM B861, B862, B363 ASTM B241, B361
Straight Tees Reducing Tees Straight Thermowell Tees Angle Thermowell Tees
1/2" to 12" 3/4" x 1/2" to 12" x 10" 1/2" x 1/2" x 3/4" to 1/2" x 3/4" x 1/2" to
1-1/2" x 1-1/2" x 3/4" 1-1/4" x 3/4" x 1-1/4"
BESTWELD, INC. Call us, fax us or e-mail us and we’ll send our NEW CATALOG on “CD”
Pottstown, PA 19464
Ph: 610-718-9700 including 2D and 3D CAD Drawings.
Fax: 610-718-9800
Web: www.bestweld.com SEE OUR AD IN THE ADVERTISING SECTION
E-Mail: fittings@bestweld.com
0412-04 5/2/05 12:42 PM Page 418
412-05
413-05
414-05
Electro-Pneumatic
CONTROLLER
The PMC Controller can be used in a wide range of
fluid control applications. Accepting input signals
from any standard 4-20 mA transmitter or RTD, the
instrument monitors and controls variables such as
pressure, temperature, liquid level and flow rate in
steam, air and other fluid systems.
Features
Simplified Control Start-up requires only
Panel three simple adjustments.
No complex keyboard
instructions or
programming.
NEMA 4 Enclosure Rugged watertight
enclosure can be located
at the process. All
adjustment controls are
inside to discourage
tampering and to avoid
accidental changing
during operation.
Internal Power Simplifies installation.
Supply Provides clean, reliable
power to transmitter.
Internal Pneumatic Operates with standard
Circuit plant air supply. No
constant air bleed. Air is
used only to reposition
the final control element.
Backlit Provides easily readable
LCD Display display of the process
value, set point or
deviation under varying
light conditions.
Selectable Control Offers flexibility in control
Action loop set up by allowing
choice of direct or reverse
action with the flip of a
switch.
415-05
STEM PACKING:
PTFE V-Rings,
-40 to 460˚F (-22 to 238˚C)
PTFE/Graphite,
-40 to 500˚F (-22 to 260˚C) DIMENSIONS (Inches) and WEIGHTS (Pounds)*
Laminated Graphite, CONTROL VALVE – CAST IRON CONTROL VALVE – CAST STEEL & CH. MOLY
-320 to 800˚F (-195 to 426˚C) DIMENSIONS IN INCHES DIMENSIONS IN INCHES
SIZE A B C D WGT.* SIZE A B C D WGT.*
THREADED THREADED
TRIM SIZES: 2 9 /4
1
3 /4
3
7 /4
1
12 /8 80 lb.
3
2 9 /4
1
3 7 /8
1
12 /8 45 lb.
3
Full Port 125 LB. ANSI FLANGE STANDARD 150 LB. ANSI FLANGE STANDARD
2 10 33/4 71/4 123/8 85 lb. 2 10 3 7-1/8 123/8 85 lb.
0.4 Reduced (40% of full capacity) 2-1/2 107/8 43/8 65/8 151/4 125 lb. 2-1/2 107/8 31/2 65/8 151/4 125 lb.
3 113/4 41/2 67/8 151/4 145 lb. 3 113/4 33/4 67/8 151/4 145 lb.
VALVE TRIM MATERIALS: 4 137/8 51/2 81/8 151/4 190 lb. 4 137/8 41/2 85/8 151/4 190 lb.
Plug and Seat Ring: 6 173/4 57/8 93/4 195/8 460 lb. 6 173/4 51/2 93/4 195/8 450 lb.
8 213/8 75/8 121/4 273/8 625 lb. 8 213/8 63/4 121/4 273/8 600 lb.
400 Series Stainless Steel with 250 LB. ANSI FLANGE STANDARD 300 LB. ANSI FLANGE STANDARD
PTFE or Ni-Resist Seal 2 101/2 33/4 71/4 123/8 88 lb. 2 101/2 31/4 71/8 123/8 88 lb.
Cage: 2-1/2 111/2 43/8 65/8 151/4 130 lb. 2-1/2 111/2 33/4 65/8 151/4 130 lb.
3 121/2 41/2 67/8 151/4 152 lb. 3 121/2 41/8 67/8 151/4 152 lb.
ASTM A-743 Stainless Steel 4 141/2 51/2 81/2 151/4 198 lb. 4 141/2 5 85/8 151/4 198 lb.
Stem: 6 185/8 57/8 93/4 195/8 480 lb. 6 185/8 61/4 93/4 195/8 470 lb.
8 223/8 75/8 121/4 273/8 640 lb. 8 223/8 71/2 121/4 273/8 635 lb.
316 Stainless Steel 600 LB. ANSI FLANGE STANDARD
Optional: — — — — — — 2 111/4 31/4 71/8 123/8 90 lb.
Teflon® soft seat or Stellite seat. — — — — — — 2-1/2 121/4 33/4 65/8 151/4 135 lb.
— — — — — — 3 131/4 41/8 67/8 151/4 158 lb.
— — — — — — 4 151/2 53/8 85/8 151/4 205 lb.
— — — — — — 6 20 7 93/4 195/8 485 lb.
— — — — — — 8 24 81/4 121/4 273/8 660 lb.
*Weights are approximate. Dimensions and weights of Socket Weld and Butt Weld valves available upon request.
416-05
FLOTECH, INC.
CROSS VALVES
Construction:
Body/Bonnet Cast Steel, Ductile
Cross Valves Iron or Bronze
Dimensions (inches) Trim Bronze or Monel
F-F C-F
2 8 4 Design:
Stop Valve
2-1/2 8-1/2 4-1/4
Stop Check (shown)
3 9-1/2 4-3/4
3-1/2 10-1/2 5-1/4 End Connections:
4 11-1/2 5-3/4 Buttweld
5 14 7 Flanged ANSI
Flanged DIN
6 16 8
Flanged JIS
8 19-1/2 9-3/4
Note: Dimensions shown above are typical. Certifications available
Other dimensions are available upon request upon request:
ABS, DNV, Lloyds,
Germanischer Lloyd
MANIFOLDS
• Condensers/Heat Exchangers
Flotech Inc.
3330 Evergreen Ave.
Jacksonville, FL 32206 • Valve Repair
• Foundry/Castings
904-358-1849 / Fax: 904-632-2383 • Machining
www.flotechinc.com TUBE SERVICES • Welding / Fabrication
NEW MANUFACTURE – REPAIR – RETUBE – INSPECT – TEST – CLEAN – REPLACEMENT PARTS – REPLACEMENT TUBES
0419-04 5/2/05 12:57 PM Page 1
417-05
301 Hose SAE 100R2 Type AT Construction: Synthetic rubber tube; two braids
of high tensile steel wire reinforcement; MSHA
Part Hose Hose Working Burst Minimum accepted synthetic rubber cover.
Number I.D. O.D. Pressure Pressure Bend Radius
inch mm inch mm psi MPa psi MPa inch mm Applications & Temperature Range: High pressure service hose for use with:
301-4 1/4 6,3 0.59 15 5000 34,5 20000 138 4 100 Petroleum based hydraulic fluids and lubricating oils within a temperature range of
301-6 3/8 10 0.75 19 4000 27,5 16000 110 5 130 -40°F to +257°F (-40°C to +125°C);
301-8 1/2 12,5 0.88 22 3500 24 14000 96 7 180
301-10 5/8 16 1.00 25 2750 19 11000 76 8 200 Water, water/gycol, water/oil emulsion hydraulic fluids up to +185°F (+85°C);
301-12 3/4 19 1.16 30 2250 15,5 9000 62 9-1/2 240
301-16 1 25 1.50 38 2000 13,8 8000 55 12 300 Air within a temperature range of -40°F to +158°F (-40°C to +70°C).
301-20 1-1/4 31,5 1.86 47 1625 11,2 6500 45 16-1/2 420 For air or gas applications above 250 psi (1, 7 MPa), cover should be pin pricked.
301-24 1-1/2 38 2.15 54 1250 8,6 5000 35 20 500
301-32 2 51 2.66 68 1125 7,8 4500 31 25 630 Fittings: 43 Series and Field Attachable 30 Series.
381 Hose SAE 100R2 Type AT & DIN 20 022- 2SN Construction: Synthetic rubber tube; two braids
of tensile steel wire reinforcement; MSHA
accepted synthetic rubber cover.
Part Hose Hose Working Burst Minimum
Number I.D. O.D. Pressure Pressure Bend Radius Applications & Temperature Range: High pressure service hose for use with:
inch mm inch mm psi MPa psi MPa inch mm
381-4 1/4 6,3 0.59 15 5800 40 23200 160 4 100 Petroleum based hydraulic fluids and lubricating oils within a temperature range of
381-5 5/16 8 0.66 17 5075 35 20300 140 4-1/2 115 -40°F to +257°F (-40°C to +125°C);
381-6 3/8 10 0.75 19 5000 34,5 20000 138 5 130
381-8 1/2 12,5 0.88 22 4250 29,3 17000 118 7 180 Water, water/gycol, water/oil emulsion hydraulic fluids up to +185°F (+85°C);
381-10 5/8 16 1.00 25 3625 25 14500 100 8 200
381-12 3/4 19 1.16 30 3125 21,5 12500 86 9-1/2 240
Air within a temperature range of -40°F to +158°F (-40°C to +70°C).
381-16 1 25 1.50 38 2500 17.5 10000 70 12 300 For air or gas applications above 250 psi (1, 7 MPa), cover should be pin pricked.
381-20 1-1/4 31,5 1.87 47 2250 15,5 9000 62 16-1/2 420
381-24 1-1/2 38 2.15 54 1800 12,5 7200 50 20 500
Fittings: 43 Series and Field Attachable 30 Series.
381-32 2 51 2.66 68 1300 9 5200 36 25 630
Crimping Machines
Crimper complete with power pack, Crimper complete with power pack,
die rings and dies for -4, -6, -8, -12 die rings and dies for -4, -6, -8, -12
and -16 hoses. 80C-001 and -16 hoses. 80C-001
Optional dies: Optional dies:
-5 hose 80C-A05 -5 hose 80C-A05
-10 hose 80C-A10 -10 hose 80C-A10
-20 hose 80C-A20 -20 hose 80C-A20
Dimensions: 26”W x 19-1/2”D x 24-1/4”H. Dimensions: 26”W x 19-1/2”D x 24-1/4”H.
Wt. 275 lbs. w/power pack Wt. 275 lbs. w/power pack
The crimping machines shown here will crimp 43 Series fittings on the hoses shown up to 1-1/4” I.D.
418-05
10143 10643
Male Pipe JIC 37° Swivel
10343 10843
Male JIC 37° SAE 45° Swivel
Part Tube Thread Hose Part Tube Thread Hose Part Tube Thread Hose
Number Size Size I.D. Number Size Size I.D. Number Size Size I.D.
10343-4-4 1/4 7/16 x 20 1/4 10343-12-8 3/4 1-1/16 x 12 1/2 10843-6-4 3/8 5/8 x 18 1/4
10343-5-4 5/16 1/2 x 20 1/4 10343-10-10 5/8 7/8 x 14 5/8 10843-6-6 3/8 5/8 x 18 3/8
10343-6-4 3/8 9/16 x 18 1/4 10343-12-10 3/4 1-1/16 x 12 5/8 10843-12-8+ 3/4 1-1/16 x 14 1/2
10343-5-6 5/16 1/2 x 20 3/8 10343-12-12 3/4 1-1/16 x 12 3/4 10843-12-12 3/4 1-1/16 x 14 3/4
10343-6-6 3/8 9/16 x 18 3/8 10343-14-12 7/8 1-3/16 x12 3/4 +Non-standard product
10343-8-6 1/2 3/4 x 16 3/8 10343-16-12 1 1-5/16 x 12 3/4
1034310-6 5/8 7/8 x 14 3/8 10343-16-16 1 1-5/16 x 12 1 11143
10343-8-8 1/2 3/4 x 16 1/2 10343-20-20 1-1/4 1-5/8 x 12 1-1/4
10343-10-8 5/8 7/8 x 14 1/2
“Ferrul-Fix”
SAE Flareless
Part Tube Thread Hose
Number Size Size I.D.
10543
11143-4-4 1/4 7/16 x 20 1/4
Straight Thread O-Ring 11143-5-4 5/16 1/2 x 20 1/4
11143-4-6 1/4 7/16 x 20 3/8
11143-5-6 5/16 1/2 x 20 3/8
Part Tube Thread Hose Part Tube Thread Hose 11143-6-6 3/8 9/16 x 18 3/8
Number Size Size I.D. Number Size Size I.D.
11143-8-8 1/2 3/4 x 16 1/2
10543-4-4 1/4 7/16 x 20 1/4 10543-12-8 3/4 1-1/16 x 12 1/2 11143-10-8 5/8 7/8 x 14 1/2
10543-5-4 5/16 1/2 x 20 1/4 10543-10-10 5/8 7/8 x 14 5/8 11143-12-12 3/4 1-1/16 x 12 3/4
10543-6-4 3/8 9/16 x 18 1/4 10543-12-10 3/4 1-1/16 x 12 5/8
10543-6-6 3/8 9/16 x 18 3/8 10543-10-12 5/8 7/8 x 14 3/4
10543-8-6 1/2 3/4 x 16 3/8 10543-12-12 3/4 1-1/16 x 12 3/4 11243
10543-10-6 5/8 7/8 x 14 3/8 10543-16-12 1 1-5/16 x 12 3/4
SAE Flareless Swivel
10543-6-8 3/8 9/16 x 18 1/2 10543-16-16 1 1-5/16 x 12 1
10543-8-8 1/2 3/4 x 16 1/2 10543-20-20 1-1/4 1-5/8 x 12 1-1/4
10543-10-8 5/8 7/8 x 14 1/2 Part Tube Thread Hose
Number Size Size I.D.
11243-6-6 3/8 9/16 x 18 3/8
11243-8-6 1/2 3/4 x 16 3/8
11243-8-8 1/2 3/4 x 16 1/2
11243-20-20+ 1-1/4 1-5/8 x 12 1-1/4
419-05
11543 13743
SAE Code 61 JIC 37°
Flange Straight Swivel 45° Elbow
SAE SAE Part Tube Thread Hose Part Tube Thread Hose
Part Flange Hose Part Flange Hose Number Size Size I.D. Number Size Size I.D.
Number Size I.D. Number Size I.D.
13743-4-4 1/4 7/16 x 20 1/4 13743-10-8 5/8 7/8 x 14 1/2
11543-8-8 1/2 1/2 11543-24-20 1-1/2 1-1/4 13743-5-4 5/16 1/2 x 20 1/4 13743-10-10 5/8 7/8 x 14 5/8
11543-12-8 3/4 1/2 11543-32-20 2 1-1/4 13743-6-4 3/8 9/16 x 18 1/4 13743-12-10 3/4 1-1/16 x 12 5/8
11543-12-12 3/4 3/4 11543-24-24 1-1/2 1-1/2 13743-6-6 3/8 9/16 x 18 3/8 13743-12-12 3/4 1-1/16 x 12 3/4
11543-16-12 1 3/4 11543-32-24 2 1-1/2 13743-8-6 1/2 3/4 x 16 3/8 13743-16-16 1 1-5/16 x 12 1
11543-16-16 1 1 11543-24-32 1-1/2 2 13743-8-8 1/2 3/4 x 16 1/2 13743-20-20 1-1/4 1-5/8 x 12 1-1/4
11543-20-16 1-1/4 1 11543-32-32 2 2
11543-20-20 1-1/4 1-1/4
13943
11743 JIC 37°
SAE Code 61 Swivel 90° Elbow (Short)
Flange 45° Elbow
SAE SAE Part Tube Thread Hose Part Tube Thread Hose
Part Flange Hose Part Flange Hose Number Size Size I.D. Number Size Size I.D.
Number Size I.D. Number Size I.D. 13943-4-4 1/4 7/16 x 20 1/4 13943-10-8 5/8 7/8 x 14 1/2
11743-8-8 1/2 1/2 11743-20-20 1-1/4 1-1/4 13943-5-4 5/16 1/2 x 20 1/4 13943-12-8 3/4 1-1/16 x 12 1/2
11743-12-8 3/4 1/2 11743-24-20 1-1/2 1-1/4 13943-6-4 3/8 9/16 x 18 1/4 13943-10-10 5/8 7/8 x 14 5/8
11743-12-12 3/4 3/4 11743-20-24 1-1/4 1-1/2 13943-5-5 5/16 1/2 x 20 5/16 13943-12-10 3/4 1-1/16 x 12 5/8
11743-16-12 1 3/4 11743-24-24 1-1/2 1-1/2 13943-4-6 1/4 7/16 x 20 3/8 13943-12-12 3/4 1-1/16 x 12 3/4
11743-16-16 1 1 11743-32-24 2 1-1/2 13943-6-6 3/8 9/16 x 18 3/8 13943-16-12 1 1-5/16 x 12 3/4
11743-20-16 1-1/4 1 11743-32-32 2 2 13943-8-6 1/2 3/4 x 16 3/8 13943-16-16 1 1-5/16 x 12 1
13943-6-8 3/8 9/16 x 18 1/2 13943-20-20 1-1/4 1-5/8 x 12 1-1/4
13943-8-8 1/2 3/4 x 16 1/2
11943
SAE Code 61
Flange 90° Elbow
14143
JIC 37°
SAE SAE
Swivel 90° Elbow (Long)
Part Flange Hose Part Flange Hose
Number Size I.D. Number Size I.D.
11943-8-8 1/2 1/2 11943-20-16 1-1/4 1
11943-12-8 3/4 1/2 11943-20-20 1-1/4 1-1/4
11943-16-8 1 1/2 11943-24-20 1-1/2 1-1/4
11943-12-10 3/4 5/8 11943-20-24 1-1/4 1-1/2
Part Tube Thread Hose Part Tube Thread Hose
11943-12-12 3/4 3/4 11943-24-24 1-1/2 1-1/2 Number Size Size I.D. Number Size Size I.D.
11943-16-12 1 3/4 11943-32-24 2 1-1/2 14143-4-4 1/4 7/16 x 20 1/4 14143-10-10 5/8 7/8 x 14 5/8
11943-16-16 1 1 11943-32-32 2 2 14143-5-4 5/16 1/2 x 20 1/4 14143-12-12 3/4 1-1/16 x 12 3/4
14143-6-6 3/8 9/16 x 18 3/8 14143-14-12 7/8 1-3/16 x12 3/4
14143-8-6 1/2 3/4 x 16 3/8 14143-16-16 1 1-5/16 x 12 1
14143-8-8 1/2 3/4 x 16 1/2 14143-20-20 1-1/4 1-5/8 x 12 1-1-/4
14143-10-8 5/8 7/8 x 14 1/2
420-05
20130 20630
Male Pipe NPTF SAE (JIC) 37° Swivel
Pipe Pipe Part Tube Thread Hose Part Tube Thread Hose
Part Thread Hose Part Thread Hose Number Size Size I.D. Number Size Size I.D.
Number Size inch Number Size inch 20630-4-4*~ 1/4 7/16 x 20 1/4 20630-12-10 3/4 1-1/16 x 12 5/8
20130-2-4 1/8 x 27 1/4 20130-8-10 1/2 x 14 5/8 20630-5-4 ~ 5/16 1/2 x 20 1/4 20630-10-12~ 5/8 7/8 x 14 3/4
20130-4-4 1/4 x 18 1/4 20130-12-8 3/4 x14 1/2 20630-4-6 ~ 1/4 7/16 x 20 3/8 20630-12-12 3/4 1-1/16 x 12 3/4
20130-4-6 1/4 x 18 3/8 20130-12-12 3/4 x 14 3/4 20630-6-6 3/8 9/16 x 18 3/8 20630-14-12 7/8 1-3/16 x 12 3/4
20130-6-4 3/8 x 18 1/4 20130-12-16 3/4 x 14 1 20630-8-6 ~ 1/2 3/4 x 16 3/8 20630-16-12 1 1-5/16 x 12 3/4
20130-6-6 3/8 x 18 3/8 20130-16-16 1 x 11-1/2 1 20630-8-8 ~ 1/2 3/4 x 16 1/2 20630-14-16 7/8 1-3/16 x 12 1
20130-6-8 3/8 x 18 1/2 20130-20-20 1-1/4 x 11-1/2 1-1/4 20630-10-8 ~ 5/8 7/8 x 14 1/2 20630-16-16 1 1-5/16 x 12 1
20130-8-6 1/2 x 14 3/8 20130-24-24 1-1/2 x 11-1/2 1-1/2 20630-12-8 3/4 1-1/16 x 12 1/2 20630-20-16 1-1/4 1-5/8 x 12 1
20130-8-8 1/2 x 14 1/2 20130-32-32 2 x 11-1/2 2 20630-8-10~+ 1/2 3/4 x 16 5/8 20630-20-20 1-1/4 1-5/8 x 12 1-1/4
20630-10-10~ 5/8 7/8 x 14 5/8
~These fittings are dual seated for both 37° and 45° flares.
*These fittings are available in 316 stainless steel; add C to the part number
20330
Male SAE (JIC) 37°
20830
SAE 45° Swivel
Part Tube Thread Hose Part Tube Thread Hose
Number Size Size I.D. Number Size Size I.D.
20330-4-4 1/4 7/16 x 20 1/4 20330-10-8 5/8 7/8 x 14 1/2 Part Tube Thread Hose
20330-5-4 5/16 1/2 x 20 1/4 20330-10-10 5/8 7/8 x 14 5/8 Number O.D. Size I.D.
20330-6-4 3/8 9/16 x 18 1/4 20330-12-12 3/4 1-1/16 x 12 3/4 20830-6-6 3/8 5/8 x 18 3/8
20330-6-6 3/8 9/16 x 18 3/8 20330-14-12 7/8 1-3/16 x 12 3/4
20330-8-6 1/2 3/4 x 16 3/8 20330-16-16 1 1-5/16 x 12 1
20330-8-8 1/2 3/4 x 16 1/2 20330-20-20 1-1/4 1-5/8 x 12 1-1/4
21130
SAE Flareless
20530
Part Tube Thread Hose Part Tube Thread Hose
SAE Straight Thread Number O.D. Size I.D. Number O.D. Size I.D.
O-Ring 21130-4-4 1/4 7/16 x 20 1/4 21130-8-8 1/2 3/4 x 16 1/2
21130-4-6 1/4 7/16 x 20 3/8 21130-10-8 5/8 7/8 x 14 1/2
21130-6-6 3/8 9/16 x 18 3/8 21130-12-12 3/4 1-1/16 x 12 3/4
Part Port Thread Hose Part Port Thread Hose 21130-8-6 1/2 3/4 x 16 3/8 21130-16-16 1 1-5/16 x 12 1
Number Size Size I.D Number Size Size I.D
20530-4-4 1/4 7/16 x 20 1/4 20530-8-8 1/2 3/4 x 16 1/2
20530-6-4. 3/8 9/16 x 18 1/4 20530-10-8 5/8 7/8 x 14 1/2
20530-6-6 3/8 9/16 x 18 3/8 20530-12-8 3/4 1-1/16 x 12 1/2 21230
20530-8-6 1/2 3/4 x 16 3/8 20530-12-12 3/4 1-1/16 x 12 3/4 SAE Flareless Swivel
421-05
21530
23730
SAE (Code 61)
SAE (JIC) 37°
Flange Head Straight
Swivel 45° Elbow
SAE SAE
Part Flange Hose Part Flange Hose
Number Size I.D. Number Size I.D. Part Tube Thread Hose Part Tube Thread Hose
21530-8-8 1/2 1/2 21530-20-20 1-1/4 1-1/4 Number Size Size I.D. Number Size Size I.D.
21530-12-8 3/4 1/2 21530-24-20 1-1/2 1-1/4 23730-4-4 1/4 7/16 x 20 1/4 23730-10-10 5/8 7/8 x 14 5/8
21530-12-12 3/4 3/4 21530-20-24 1-1/4 1-1/2 23730-6-6 3/8 9/16 x 18 3/8 23730-12-12 3/4 1-1/16 x 12 3/4
21530-16-12 1 3/4 21530-24-24 1-1/2 1-1/4 23730-8-8 1/2 3/4 x 16 1/2 23730-16-16 1 1-5/16 x 12 1
21530-20-12 1-1/4 3/4 21530-16-32 1 2 23730-10-8 5/8 7/8 x 14 1/2
21530-16-16 1 1 21530-32-32 2 2
21530-20-16 1-1/4 1
21730 23930
SAE (Code 61) Flange SAE (JIC) 37°
Head 45° Elbow Swivel 90° Elbow
SAE SAE
Part Flange Hose Part Flange Hose Part Tube Thread Hose Part Tube Thread Hose
Number Size Size I.D. Number Size Size I.D.
Number Size I.D. Number Size I.D.
23930-4-4 1/4 7/16 x 20 1/4 23930-10-10 5/8 7/8 x 14 5/8
21730-12-8 3/4 1/2 21730-20-20 1-1/4 1-1/4
23930-6-6 3/8 9/16 x 18 3/8 23930-12-12 3/4 1-1/16 x 12 3/4
21730-12-12 3/4 3/4 21730-24-20 1-1/2 1-1/4
23930-8-6 1/2 3/4 x 16 3/8 23930-16-16 1 1-5/16 x 12 1
21730-16-12 1 3/4 21730-24-24 1-1/2 1-1/2
23930-8-8 1/2 3/4 x 16 1/2 23930-20-20 1-1/4 1-5/8 x 12 1-1/4
21730-16-16 1 1 21730-32-32 2 2
23930-10-8 5/8 7/8 x 14 1/2
21730-20-16 1-1/4 1
21930 24130
SAE (Code 61) Flange SAE (JIC) 37°
Head 90° Elbow Swivel 90° Elbow (Long)
SAE SAE
Part Flange Hose Part Flange Hose
Number Size I.D. Number Size I.D. Part Tube Thread Hose Part Tube Thread Hose
21930-8-8 1/2 1/2 21930-20-16 1-1/4 1 Number Size Size I.D. Number Size Size I.D.
21930-12-8 3/4 1/2 21930-20-20 1-1/4 1-1/4 24130-4-4 1/4 7/16 x 20 1/4 24130-10-8 5/8 7/8 x 14 1/2
21930-12-12 3/4 3/4 21930-24-20 1-1/2 1-1/4 24130-6-4 3/8 9/16 x 18 1/4 24130-10-10 5/8 7/8 x 14 5/8
21930-16-12 1 3/4 21930-24-24 1-1/2 1-1/2 24130-6-6 3/8 9/16 x 18 3/8 24130-12-12 3/4 1-1/16 x 12 3/4
21930-20-12 1-1/4 3/4 21930-32-32 2 2 24130-8-6 1/2 3/4 x 16 3/8 24130-16-16 1 1-5/16 x 12 1
21930-16-16 1 1 24130-8-8 1/2 3/4 x 16 1/2
422-05
PTFE 919U Hose with Stainless Steel Wire Braid Max. Standard Max. Min. Min. Weight
and Black Urethane Cover Hose Hose PTFE Wall Working Burst Bend per
Part I.D. O.D. Thickness Pressure Pressure Radius 100 ft.
Construction: Meets or exceeds all requirements of SAE 100R14. Number in. in. in. psi psi in. lbs.
Inner tube of FDA approved extruded PTFE with 304 stainless steel wire
braid reinforcement and a weather and abrasion resistant black
elastomeric cover (.028" thick). #
Applications: Maximum working pressures at 75°F are 1000 to 3000 psi 919U-4 3/16 3/8 .030 3000 12,000 2.0 8.4
(depending on size). Service temperature range is -40°F to +275°F 919U-6 5/16 1/2 .030 2500 10,000 4.0 13.2
(-40°C to +135°C). FDA compliant tube for food contact applications. 919U-8 13/32 5/8 .030 2000 8000 5.0 15.0
Vacuum Service: 28 inches of Hg sizes -4 through -10; 12 inches of Hg
919U-12 5/8 27/32 .030 1200 5000 7.5 22.1
size -12; 14 inches of Hg size -16.
919U-16 7/8 1-1/16 .035 1000 4000 9.0 31.4
Fittings: 91N Series. Permanently attached fittings only. Cover must
be skived prior to fitting attachment. Change in length at working pressure is ±2% to -4%.
For non-standard cover colors, please specify when ordering.
423-05
#
936 Polyester Braided Convoluted PTFE Hose
936/936B-8 1/2 0.86 250 1000 1.00 28 10.20
936B with Conductive PTFE Liner 936/936B-10 5/8 0.96 250 1000 1.50 28 13.80
Construction: Convoluted PTFE core tube with a single layer of 936/936B-12 3/4 1.12 250 1000 2.00 28 19.00
polyester reinforcement. 936B has a black conductive liner for 936/936B-16 1 1.42 250 1000 3.00 28 22.80
applications requiring static dissipation. 936/936B-20 1-1/4 1.80 200 800 4.00 20* 34.40
Applications: For use in chemical transfer, low-pressure fuel, 936/936B-24 1-1/2 2.05 125 500 5.00 12* 37.20
936/936B-32 2 2.60 125 500 7.50 5* 47.50
and various processing applications.
Not recommended for steam-cold water cycling applications. *28 in/Hg can be obtained by using 2799 internal spring guard.
Operating Temperature: -65°F to +275°F (-54°C to +135°C). For a black, static dissipative core tube, add suffix “B”; i.e., 936B-8.
Fittings: Crimped 93N Series fittings only. Use the black core tube when conveying non-conductive fluids such as oils, paints, fuels,
steam, etc.
960/960W Smooth Bore FEP Hose Nom. Max. Max. Min. Min. Weight
Hose Hose Working Burst Vacuum Bend per
Construction: Core tube of white, FDA compliant FEP material Part I.D. O.D. Pressure Pressure Rating Radius 100 ft.
(.03” thick) reinforced with helical wrapped wire for full vacuum Number in. in. psi psi in./Hg in. lbs.
support. Blue rubber cover for resistance to abrasion, ozone,
and weathering. 960W hose with a gray FDA compliant rubber
cover, steam cleanable.
#
Applications: For use in transfer of various chemicals, 960/960W-8 1/2 .95 500 2000 30 3.00 0.35
foodstuffs, pharmaceuticals, reagents, solvents, and wastes. 960/960W-12 3/4 1.26 500 2000 30 6.00 0.62
Operating Temperature: -40°F to +300°F (-40°C to +149°C). 960/960W-16 1 1.69 450 1800 30 9.00 0.75
Pressure rating must be reduced 1% for every 2°F above 212°F 960/960W-20 1-1/4 1.94 375 1500 30 11.00 0.98
(100°C). 960/960W-24 1-1/2 2.25 375 1500 30 12.00 1.20
Fittings: Crimped 96N Series fittings only. 960/960W-32 2 2.53 300 1200 30 16.00 1.50
424-05
B
HEX
M N
D
Female-Female Pipe Ends XV500P-20, XV500P-24, XV500P-32
PIPE
C
PART THREAD FLOW HEX M
NO. [PTF] OCTAGON H L M N DIA.D
Tee Handle, Female Pipe Ends XV500P-X-04
XV500P-20 1-1/4 1.93 6.22 8.05 3.66 3.01 1.18
PART PIPE B C D
XV500P-24 1-1/2 2.13 6.22 8.23 4.02 3.25 1.50
NO. THREAD HEX HEX H L M N FLOW
XV500P-32 2 2.69 6.22 8.58 4.76 3.52 1.89
XV500P-4-04 1/4 15/16 15/16 1.25 2.50 2.03 1.87 .375
XV500P-6-04 3/8 15/16 15/16 1.25 2.50 2.03 1.87 .375
L XV500P-8-04 1/2 1-1/16 1-1/16 1.25 2.50 2.20 1.98 .500
H
XV500P-12-04 3/4* 1-1/4 1-5/16 1.25 2.50 2.42 2.20 .685
XV500P-16-04 1* 1-1/2 1-9/16 1.25 2.50 2.75 2.48 .875
B HEX N
*PTF special extra short
L
D H
C 10-32 UNF-2B
HEX K B
(ALL SIZES) HEX
M
N
Vented, Female Pipe Ends XVV500P D
PART PIPE B C D
NO. THREAD HEX HEX K H L M N FLOW C
HEX M
XVV500P-4 1/4 15/16 15/16 1.11 3.96 4.90 2.03 2.47 .375
XVV500P-6 3/8 15/16 15/16 1.11 3.96 4.90 2.03 2.47 .375 Oval Handle, Female Pipe Ends XV500P-X-21
XVV500P-8 1/2 1-1/16 1-1/16 1.23 3.96 5.00 2.20 2.58 .500 PART PIPE B C D
XVV500P-12 3/4* 1-1/4 1-5/16 1.45 3.96 5.25 2.42 2.81 .685 NO. THREAD HEX HEX H L M N FLOW
XVV500P-16 1* 1-1/2 1-9/16 1.58 3.96 5.34 2.75 3.08 .875 XV500P-4-21 1/4 15/16 15/16 1.74 3.49 2.03 2.38 .375
*PTF special extra short XV500P-6-21 3/8 15/16 15/16 1.74 3.49 2.03 2.38 .375
XV500P-8-21 1/2 1-1/16 1-1/16 1.74 3.49 2.20 2.49 .500
XV500P-12-21 3/4* 1-1/4 1-5/16 1.74 3.48 2.42 2.71 .685
XV500P-16-21 1* 1-1/2 1-9/16 1.74 3.48 2.75 2.99 .875
*PTF special extra short
425-05
M
B HEX N
Female-Female Pipe Ends PIPE XV500SS
PART THREAD B C FLOW
D NO. [NPT] HEX HEX H L M N DIA.D
XV500SS-12 3/4 1-3/8 1-3/8 5.00 6.37 2.98 3.53 .787
C XV500SS-16 1 1-5/8 1-5/8 5.00 6.72 3.62 4.01 1.000
HEX M
XV500SS-20 1-1/4 2 2 6.94 8.94 4.00 4.75 1.250
XV500SS-24 1-1/2 2-3/8 2-3/8 6.94 9.21 4.49 5.10 1.500
Female Pipe Ends, Panel Mount XV502SS XV500SS-32 2 2-3/4 2-3/4 7.87 9.65 5.43 6.06 2.000
PART B/C FLOW
NO. SIZE HEX F G H L M N DIA. D
XV502SS-4 1/4 15/16 .50 1.12 3.96 5.00 2.07 2.51 .375
L
XV502SS-6 3/8 15/16 .50 1.12 3.96 5.00 2.07 2.51 .375 H
XV502SS-8 1/2 1-1/16 .50 1.12 3.96 5.11 2.25 2.63 .500 .32Ø L
H
.32Ø N C HEX
B HEX OFF
ON
D
B HEX N
M
D
Locking Handle,Female Pipe Ends PIPE XVP500SS
PART THREAD B C FLOW
C
NO. [NPT] HEX HEX H L M N DIA.D
HEX M
XVP500SS-12 3/4 1-3/8 1-3/8 4.94 6.40 2.98 3.53 .787
XVP500SS-16 1 1-5/8 1-5/8 5.00 6.72 3.62 4.01 1.000
Locking Handle, Female Pipe Ends, Panel Mount XVP502SS XVP500SS-20 1-1/4 2 2 6.94 8.94 4.00 4.75 1.250
PART B/C FLOW XVP500SS-24 1-1/2 2-3/8 2-3/8 6.94 9.21 4.49 5.10 1.500
NO. SIZE HEX F G H L M N DIA. D XVP500SS-32 2 2-3/4 2-3/4 7.87 9.65 5.43 6.06 2.010
XVP502SS-4 1/4 15/16 .50 1.12 3.96 5.00 2.07 2.51 .375 For use with 5/16” ¯ shank lock
XVP502SS-6 3/8 15/16 .50 1.12 3.96 5.00 2.07 2.51 .375
XVP502SS-8 1/2 1-1/16 .50 1.12 3.96 5.11 2.25 2.63 .500
For use with 5/16” ¯ shank lock L
H
L
H
C HEX
10-24 UNC 2B N
B D
HEX
N
G
B
D HEX M
426-05
;;
Swivel nut valve connector 14FSV
PART TUBE STRGHT Flare to Solder 43F Union tee 144F/244F
;;
NO. SIZE THD PART TUBE SOLDER STRGHT
NO. SIZE OD THD REF. SAE 010401
14FSV-4 1/4 7/16-20
43F-4-4 1/4 1/4 7/16-20 PART TUBE STRGHT
14FSV-6 3/8 5/8-18 NO. SIZE THD
43F-4-5 1/4 5/16 7/16-20
14FSV-8 1/2 3/4-16 144F 144F-3 3/16 3/8-24
43F-4-6 1/4 3/8 7/16-20
14FSV-10 5/8 7/8-14 144F-4 1/4 7/16-20
43F-6-4 3/8 1/4 5/8-18
244F-4 1/4 7/16-20
43F-6-5 3/8 5/16 5/8-18
144F-5 5/16 1/2-20
Long nut 41FL 43F-6-6 3/8 3/8 5/8-18
244F 144F-6 3/8 5/8-18
REF. SAE 010111 43F-6-8 3/8 1/2 5/8-18
144F-8 1/2 3/4-16
PART TUBE STRGHT 43F-6-10 3/8 5/8 5/8-18
144F-10 5/8 7/8-14
NO. SIZE THD 43F-8-6 1/2 3/8 3/4-16
41FL-2 1/8 5/16-24 43F-8-8 1/2 1/2 3/4-16
41FL-3 3/16 3/8-24 43F-8-10 1/2 5/8 3/4-16
;;
41FL-4 1/4 7/16-20 43F-10-8 5/8 1/2 7/8-14
41FL-5 5/16 1/2-20 43F-10-10 5/8 5/8 7/8-14
;;
Union tee 144 F combination sizes
41FL-6 3/8 5/8-18 43F-10-12 5/8 3/4 7/8-14 PART 1 TUBE 2 TUBE 3 TUBE
41FL-8 1/2 3/4-16 43F-10-14 5/8 7/8 7/8-14 NO. SIZE SIZE SIZE
41FL-10 5/8 7/8-14 43F-12-12 3/4 3/4 1-1/16-14 144F-6-6-4 3/8 3/8 1/4
41FL-12 3/4 1-1/16-14 43F-12-14 3/4 7/8 1-1/16-14 144F-8-8-6 1/2 1/2 3/8
427-05
;;
REF. SAE 010501
PART TUBE STRGHT
NO. SIZE THD
147F-6 3/8 5/8-18
;;;
Union elbow 155F
;;
REF. SAE 010201 *THD PROTECTORS Cap nut 640F
;;;
Male elbow 149F/249F PART TUBE STRGHT
;;
PART TUBE STRGHT NO. SIZE THD
REF. SAE 010202 *THD PROTECTORS NO. SIZE THD
640F-3* 3/16 3/8-24
PART TUBE PIPE STRGHT 155F-2 1/8 5/16-24
NO. SIZE THD THD 640F-4* 1/4 7/16-20
155F-3 3/16 3/8-24
149F-2-2 1/8 1/8 5/16-24 640F-5* 5/16 1/2-20
149F 155F-4 1/4 7/16-20
149F-3-2 3/16 1/8 3/8-24 640F-6* 3/8 5/8-18
155F-5 5/16 1/2-20
249F-3-2 3/16 1/8 3/8-24 640F-8* 1/2 3/4-16
155F-6 3/8 5/8-18
149F-4-2 1/4 1/8 7/16-20 640F-10* 5/8 7/8-14
155F-8 1/2 3/4-16
249F-4-2 1/4 1/8 7/16-20 *Should be used with 2GF copper gasket.
155F-10 5/8 7/8-14
149F-4-4 1/4 1/4 7/16-20 155F-12* 3/4 1-1/16-14
249F
249F-4-4 1/4 1/4 7/16-20
149F-4-6 1/4 3/8 7/16-20
249F-4-6 1/4 3/8 7/16-20
149F-5-2 5/16 1/8 1/2-20
Flared union female flare to
249F-5-2 5/16 1/8 1/2-20
female flare 660FHD
149F-5-4 5/16 1/4 1/2-20
249F-5-4 5/16 1/4 1/2-20 REF. SAE 010107
PART TUBE STRGHT
;;
149F-5-6 5/16 3/8 1/2-20 NO. SIZE THD
45° elbow 159F/259F
149F-6-2 3/8 1/8 5/8-18 660FHD-4* 1/4 7/16-20
;;
249F-6-2 3/8 1/8 5/8-18 REF. SAE 010302 *THD PROTECTORS
PART TUBE PIPE STRGHT 660FHD-6* 3/8 5/8-18
149F-6-4 3/8 1/4 5/8-18
;;
NO. SIZE THD THD 660FHD-8* 1/2 3/4-16
249F-6-4 3/8 1/4 5/8-18 159F-4-2 1/4 1/8 7/16-20 660fhd-10* 5/8 7/8-14
149F-6-6 3/8 3/8 5/8-18 159F
259F-4-2 1/4 1/8 7/16-20 *Should be used with 2GF copper gasket.
249F-6-6 3/8 3/8 5/8-18 159F-4-4 1/4 1/4 7/16-20
149F-6-8 3/8 1/2 5/8-18 259F-4-4 1/4 1/4 7/16-20
249F-6-8 3/8 1/2 5/8-18 159F-5-2 5/16 1/8 1/2-20
149F-6-12 3/8 3/4 5/8-18 259F 159F-5-4 5/16 1/4 1/2-20
149F-8-4 1/2 1/4 3/4-16 159F-6-2 3/8 1/8 5/8-18
149F-8-6 1/2 3/8 3/4-16 159F-6-4 3/8 1/4 5/8-18 Reducer male flare to
249F-8-6 1/2 3/8 3/4-16 259F-6-4 3/8 1/4 5/8-18 female flare 661FHD
149F-8-8 1/2 1/2 3/4-16 159F-6-6 3/8 3/8 5/8-18 REF. SAE 010105
249F-8-8 1/2 1/2 3/4-16 259F-6-6 3/8 3/8 5/8-18 PART TUBE SIZES STRGHT
149F-8-12 1/2 3/4 3/4-16 159F-8-4 1/2 1/4 3/4-16 NO. 1 2 THD
149F-10-6 5/8 3/8 7/8-14 159F-8-6 1/2 3/8 3/4-16 661FHD-4-6* 1/4 3/8 7/16-20
149F-10-8 5/8 1/2 7/8-14 259F-8-6 1/2 3/8 3/4-16 661FHD-4-8* 1/4 1/2 7/16-20
249F-10-8 5/8 1/2 7/8-14 159F-8-8 1/2 1/2 3/4-16 661FHD-6-4* 3/8 1/4 5/8-18
149F-10-12 5/8 3/4 7/8-14 259F-8-8 1/2 1/2 3/4-16 661FHD-6-8* 3/8 1/2 5/8-18
149F-12-8* 3/4 1/2 1-1/16-14 159F-10-6 5/8 3/8 7/8-14 661FHD-8-6* 1/2 3/8 3/4-16
149F-12-12* 3/4 3/4 1-1/16-14 259F-10-6 5/8 3/8 7/8-14 661FHD-8-10*1/2 5/8 3/4-16
149F-14-12 7/8 3/4 1-1/4-12 661FHD-10-8*5/8 1/2 7/8-14
;;;
159F-10-8 5/8 1/2 7/8-14
259F-10-8 5/8 1/2 7/8-14 661fhd-10-12*5/8 3/4 7/8-14
661fhd-12-10*3/4 5/8 1-1/16-14
;;;
Female elbow 150F 159F-12-8* 3/4 1/2 1-1/16-14
*Should be used with 2GF copper gasket.
REF. SAE 010203
;;;
PART TUBE PIPE STRGHT
NO. SIZE THD THD
150F-4-2 1/4 1/8 7/16-20
150F-4-4 1/4 1/4 7/16-20
150F-5-4 5/16 1/4 1/2-20 Female flare to male pipe thd 664FHD
150F-6-2 3/8 1/8 5/8-18
;;
REF. SAE 010106
150F-6-4 3/8 1/4 5/8-18 90° swivel elbow 166FSV PART TUBE PIPE STRGHT
150F-6-6 3//8 3/8 5/8-18 PART TUBE STRGHT
;;
NO. SIZE THD THD
150F-6-8 3/8 1/2 5/8-18 NO. SIZE THD
664FHD-4-2* 1/4 1/8 7/16-20
150F-8-6 1/2 3/8 3/4-16 166FSV-4-4 1/4 7/16-20
664FHD-4-4* 1/4 1/4 7/16-20
150F-8-8 1/2 1/2 3/4-16 166FSV-6-6 3/8 5/8-18
664FHD-6-4* 3/8 1/4 5/8-18
150F-8-12 1/2 3/4 3/4-16 166FSV-8-8 1/2 3/4-16
664FHD-8-6* 1/2 3/8 3/4-16
150F-10-8 5/8 1/2 7/8-14 166FSV-10-10 5/8 7/8-14
*Should be used with 2GF copper
150F-10-12 5/8 3/4 7/8-14 166FSV-12-12 3/4 1-1/16-14
flare gasket.
428-05
2ST 4SP
Hose type
Ordering Instructions for Factory Assembled Nominal Diameter (DN, SIZE)
Hose Lines
Type of end fittings
What details are necessary? (Dash)
When ordering factory assembled hose lines, please indicate
Nominal length
the following:
End fitting A O Type of hose, 2ST Nominal diameter 20 End fitting D1
1. Hose type
2. Size
3. Type of end fitting, one end
4. Type of end fitting, other end
5. Nominal Length (NL) in mm
?? ?
Having trouble finding THE PRODUCTS
429-05
D1 DN RA
mm
d5
mm
d7 d6
mm
l4
mm
SW2
mm
E1 DN RA d5 d7 d6 l4 SW2
5 6 3 M 12 x 1,5 6 52 12 mm mm mm mm mm
Metric Male,
6 8 4 M 14 x 1,5 8 53 14 5 6 3 M 16 x 1,5 8 55 17
L.P. Series 8 10 5,5 M 16 x 1,5 10 54 17
Metric Male,
6 10 4 M 18 x 1,5 10 55 19
10 12 7 M 18 x 1,5 12 56 19 H.P. Series 8 12 5,5 M 20 x 1,5 12 55 22
12 (13) 15 10 M 22 x 1,5 15 60 22 10 14 7 M 22 x 1,5 14 59 22
16 18 13 M 26 x 1,5 18 66 27 12 (13) 16 10 M 24 x 1,5 16 63 24
20 22 15,5 M 30 x 2 22 73 30 16 20 13 M 30 x 2 20 72 30
25 28 21 M 36 x 2 28 79 36 20 25 15,5 M 36 x 2 25 77 36
32 35 27 M 45 x 2 35 86 46 25 30 21 M 42 x 2 30 87 46
40 42 33 M 52 x 2 42 94 55 32 38 27 M 52 x 2 38 97 55
K0 DN RA
mm
d5
mm
d6
mm
l5
mm
l4
mm
L0 DN RA d5
mm
d6
mm
l5
mm
l4
mm
5 8 3 8 34,5 69,5
Metric Standpipe, 5 6 3 6 22 67,5 Metric Standpipe,
6 8 4 8 22 67,5 6 10 4 10 36,5 71,5
L.P. Series H.P. Series 8 12 5,5 12 36,5 71,5
8 10 5,5 10 23 68,5
For 45°, order K4 10 12 7 12 23 70,5
For 45°, order L4 10 14 7 14 39,5 76,5
For 90°, order K8 12 (13) 15 10 15 25 75,5 For 90°, order L8 12 (13) 16 10 16 40,5 80,5
16 18 13 18 26 82 16 20 13 20 47 92
20 22 15,5 22 28 90 20 25 15,5 25 54 102
25 28 21 28 30 97 25 30 21 30 57 111
32 35 27 35 36 98 32 38 27 38 50 110
40 42 33 42 36 105
A59 DN d5
mm
d7
ISO 228
l4
mm
SW1
mm J0 DN RA
mm
d5
mm
d9
mm
d14
mm
b1
mm
l4
mm
5 G 1/8 (BSP) 53 5 6 3 10 17 10 45,5
British Female Metric Banjo
6 6 8 4 12 20 12 46,5
For 45°, order A79
upon request
upon request
?? ?
Having trouble finding THE PRODUCTS
430-05
CAST S.P.A.
FLARED STEEL TUBE FITTINGS – CONVERSION ADAPTERS
Bar Ø Tube G JIC 37° Part No. Adjustable Male Stud Elbow with O-Ring & Washer
mm in. Standard Body
350 6 1/4 1/8 7/16-20 200801.3
Thread: Metric
350 8 5/16 1/8 1/2-20 200802.3 Bar Ø Tube M JIC 37° Part No.
350 10 3/8 1/4 9/16-18 200803.3 mm in. Standard Body
350 12 1/2 3/8 3/4-16 200804.3 350 6 1/4 10x1 7/16-20 204501.3
350 14-15-16 5/8 1/2 7/8-14 200805.3 315 8 5/16 12x1,5 1/2-20 204502.3
350 18-20 3/4 3/4 1-1/16-12 200806.3 315 10 3/8 14x1,5 9/16-18 204503.3
290 25 1 1 1-5/16-12 200807.3 315 12 1/2 16x1,5 3/4-16 204504.3
240 30-32 1-1/4 1-1/4 1-5/8-12 200808.3 250 14-15-16 5/8 22x1,5 7/8-14 204505.3
240 38 1-1/2 1-1/2 1-7/8-12 200809.3 250 18-20 3/4 27x2 1-1/16-12 204506.3
350 6 1/4 1/4 7//16-20 200810.3 200 25 1 33x2 1-5/16-12 204507.3
350 8 5/16 1/4 1/2-20 200811.3 200 30-32 1-1/4 42x2 1-5/8-12 204508.3
350 10 3/8 1/8 9/16-18 200812.3 160 38 1-1/2 48x2 1-7/8-12 204509.3
350 10 3/8 3/8 9/16-18 200813.3 315 6 1/4 12x1,5 7/16-20 204510.3
350 10 3/8 1/2 9/16-18 200814.3 350 8 5/16 10x1 1/2-20 204511.3
350 12 1/2 1/4 3/4-16 200815.3 315 8 5/16 14x1,5 1/2-20 204512.3
350 12 1/2 1/2 3/4-16 200816.3 315 10 3/8 16x1,5 9/16-18 204513.3
350 12 1/2 3/4 3/4-16 200817.3 315 12 1/2 18x1,5 3/4-16 204514.3
350 14-15-16 5/8 3/8 7/8-14 200818.3 315 14-15-16 5/8 18x1,5 7/8-14 204515.3
350 14-15-16 5/8 3/4 7/8-14 200819.3 250 14-15-16 5/8 20x1,5 7/8-14 204516.3
350 18-20 3/4 1/2 1-1/16-12 200820.3 250 18-20 3/4 22x1,5 1-1/16-12 204517.3
290 18-20 3/4 1 1-1/16-12 200821.3 250 25 1 27x2 1-5/16-12 204518.3
290 25 1 3/4 1-5/16-12 200822.3
240 30-32 1-1/4 1 1-5/8-12 200823.3
240 38 1-12 1-14 1-7/8-12 200824.3
431-05
CAST S.P.A.
Male Straight Adapter Male Straight Adapter Female Straight Adapter Female Straight Adapter
Thread: BSP Taper Thread: BSP Parallel Thread: BSP Taper Thread: BSP Parallel
Bar Part No. A B Bar Part No. A B Bar Part No. A B Bar Part No. A B
350 300101 1/8 1/8 400 300501 1/8 1/8 350 301401 1/8 1/8 350 301201 1/8 1/8
350 300102 1/8 1/4 400 300502 1/8 1/4 350 301402 1/4 1/4 350 301202 1/4 1/4
350 300103 1/4 1/4 400 300503 1/8 3/8 250 301403 3/8 3/8 250 301203 3/8 3/8
250 300104 1/4 3/8 400 300504 1/4 1/4 225 301404 1/2 1/2 225 301204 1/2 1/2
250 300105 3/8 3/8 400 300505 1/4 3/8 200 301405 3/4 3/4 200 301205 3/4 3/4
225 300106 3/8 1/2 350 300506 1/4 1/2 160 301406 1 1 160 301206 1 1
225 300107 1/2 1/2 315 300507 1/4 3/4 160 301407 1-1/4 1-1/4 160 301207 1-1/4 1-1/4
200 300108 1/2 3/4 400 300508 3/8 3/8 160 301408 1-1/2 1-1/2 160 301208 1-1/2 1-1/2
200 300109 3/4 3/4 350 300509 3/8 1/2 350 301409 1/8 1/4 350 301209 1/8 1/4
160 300110 3/4 1 315 300510 3/8 3/4 250 301410 1/8 3/8 250 301210 1/8 3/8
160 300111 1 1 350 300511 1/2 1/2 250 301411 1/4 3/8 250 301211 1/4 3/8
160 300112 1-1/4 1-1/4 350 300512 1/2 5/8 225 301412 1/4 1/2 225 301212 1/4 1/2
160 300113 1-1/2 1-1/2 315 300513 1/2 3/4 200 301413 1/4 3/4 200 301213 1/4 3/4
100 300114 2 2 250 300514 1/2 1 225 301414 3/8 1/2 225 301214 3/8 1/2
250 300115 3/8 1/8 200 300515 1/2 1-1/4 200 301415 1/2 3/4 200 301215 1/2 3/4
225 300116 1/2 1/4 350 300516 5/8 5/8
200 300117 3/4 1/4 315 300517 5/8 3/4
160 300118 1-1/4 1 315 300518 3/4 3/4
250 300519 3/4 1
200 300520 3/4 1-1/4
160 300521 3/4 1-1/2
250 300522 1 1
Male Straight Adapter 200 300523 1 1-1/4
Female Straight Adapter
Thread: NPT 100 300524 1 1-1/2 Thread: NPT
125 300525 1 2
Bar Part No. A B 200 300526 1-1/4 1-1/4 Bar Part No. A B
350 300201 1/8 1/8 160 300527 1-1/4 1-1/2 350 301501 1/8 1/8
350 300202 1/8 1/4 125 300528 1-1/4 2 350 301502 1/4 1/4
350 300203 1/4 1/4 160 300529 1-1/2 1-1/2 250 301503 3/8 3/8
250 300204 1/4 3/8 125 300530 1-1/2 2 225 301504 1/2 1/2
250 300205 3/8 3/8 125 300531 2 2 200 301505 3/4 3/4
225 300206 3/8 1/2 350 300532 1/8 1/2 160 301506 1 1
225 300207 1/2 1/2 350 300533 1/4 5/8 160 301507 1-1/4 1-1/4
200 300208 1/2 3/4 250 300534 1/4 1 160 301508 1-1/2 1-1/2
200 300209 3/4 3/4 350 300535 3/8 5/8 350 301509 1/8 1/4
160 300210 3/4 1 250 300536 3/8 1 250 301510 1/8 3/8
160 300211 1 1 160 300537 1/2 1-1/2 250 301511 1/4 3/8
160 300212 1-1/4 1-1/4 250 300538 5/8 1 225 301512 1/4 1/2
160 300213 1-1/2 1-1/2 200 300539 5/8 1-1/4 200 301513 1/4 3/4
100 300214 2 2 225 301514 3/8 1/2
250 300215 3/8 1/8 200 301515 1/2 3/4
225 300216 1/2 1/4
200 300217 3/4 1/4
160 300218 1-1/4 1
432-05
CAST S.P.A.
METRIC FLARELESS STEEL TUBE FITTINGS - DIN 2353
Cutting Rings Nuts Blanking Male Stud Couplings Male Stud Couplings
Plugs
Thread:
Metric parallel
Part No. Part No. Part No. Part No. Part No. Part No.
Series Bar Tube with with with with with with with with with with with with
Ø mm B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring
LL 100 4 103801 103801.4 103901 103901.4 104001 104001.4 – – – – – –
LL 100 6 103802 103802.4 103902 103902.4 104002 104002.4 – – – – – –
LL 100 8 103803 103803.4 103903 103903.4 104003 104003.4 – – – – – –
L 315 6 103804 103804.4 103904 103904.4 104004 104004.4 103604 103604.4 103704 103704.4 105604 105604.4
L 315 8 103805 103805.4 103905 103905.4 104005 104005.4 103605 103605.4 103705 103705.4 105605 105605.4
L 315 10 103806 103806.4 103906 103906.4 104006 104006.4 103606 103606.4 103706 103706.4 105606 105606.4
L 315 12 103807 103807.4 103907 103907.4 104007 104007.4 103607 103607.4 103707 103707.4 105607 105607.4
L 315 15 103808 103808.4 103908 103908.4 104008 104008.4 103608 103608.4 103708 103708.4 105608 105608.4
L 315 18 103809 103809.4 103909 103909.4 104009 104009.4 103609 103609.4 103709 103709.4 105609 105609.4
L 160 22 103810 103810.4 103910 103910.4 104010 104010.4 103610 103610.4 103710 103710.4 105610 105610.4
L 160 28 103811 103811.4 103911 103911.4 104011 104011.4 103611 103611.4 103711 103711.4 105611 105611.4
L 160 35 103812 103812.4 103912 103912.4 104012 104012.4 103612 103612.4 103712 103712.4 105612 105612.4
L 160 42 103813 103813.4 103913 103913.4 104013 104013.4 103613 103613.4 103713 103713.4 105613 105613.4
S 630 6 103814 103814.4 103914 103914.4 104014 104014.4 103614 103614.4 103714 103714.4 105614 105614.4
S 630 8 103815 103815.4 103915 103915.4 104015 104015.4 103615 103615.4 103715 103715.4 105615 105615.4
S 630 10 103816 103816.4 103916 103916.4 104016 104016.4 103616 103616.4 103716 103716.4 105616 105616.4
S 630 12 103817 103817.4 103917 103917.4 104017 104017.4 103617 103617.4 103717 103717.4 105617 105617.4
S 630 14 103818 103818.4 103918 103918.4 104018 104018.4 103618 103618.4 103718 103718.4 105618 105618.4
S 400 16 103819 103819.4 103919 103919.4 104019 104019.4 103619 103619.4 103719 103719.4 105619 105619.4
S 400 20 103820 103820.4 103920 103920.4 104020 104020.4 103620 103620.4 103720 103720.4 105620 105620.4
S 400 25 103821 103821.4 103921 103921.4 104021 104021.4 103621 103621.4 103721 103721.4 105621 105621.4
S 400 30 103822 103822.4 103922 103922.4 104022 104022.4 103622 103622.4 103722 103722.4 105622 105622.4
S 315 38 103823 103823.4 103923 103923.4 104023 104023.4 103623 103623.4 103723 103723.4 105623 105623.4
To specify Stainless Steel, change 2nd digit in part number from “0” to “1”.
433-05
CAST S.P.A.
METRIC FLARELESS STEEL TUBE FITTINGS - DIN 2353 Straight
Male Stud Elbows Male Stud Barrel Tees Male Stud Branch Tees Couplings
Form C: Taper
Form D: Parallel
(Rated pressure
valid only with
tapered ports.)
Series Bar Tube M Form Part No. M Form Part No. M Form Part No. Part No.
Ø mm B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring
LL 100 4 8x1 C – – 8x1 C – – 8x1 C – – 103501 –
LL 100 6 10x1 C – – 10x1 C – – 10x1 C – – 103502 –
LL 100 8 10x1 C – – 10x1 C – – 10x1 C – – 103503 –
L 315 6 10x1 C 102204 102204.4 10x1 C 103204 103204.4 10x1 C 102704 102704.4 103504 103504.4
L 315 8 12x1.5 C 102205 102205.4 12x1.5 C 103205 103205.4 12x1.5 C 102705 102705.4 103505 103505.4
L 315 10 14 x1.5 C 102206 102206.4 14x1.5 C 103206 103206.4 14x1.5 C 102706 102706.4 103506 103506.4
L 315 12 16x1.5 C 102207 102207.4 16x1.5 C 103207 103207.4 16x1.5 C 102707 102707.4 103507 103507.4
L 315 15 18x1.5 C 102208 102208.4 18x1.5 C 103208 103208.4 18x1.5 C 102708 102708.4 103508 103508.4
L 315 18 22x1.5 C 102209 102209.4 22x1.5 C 103209 103209.4 22x1.5 C 102709 102709.4 103509 103509.4
L 160 22 26x1.5 D 102410 102214.4 26x1.5 D 103410 103410.4 26x1.5 D 102910 102910.4 103510 103510.4
L 160 28 33x2 D 102411 102215.4 33x2 D 103411 103411.4 33x2 D 102911 102911.4 103511 103511.4
L 160 35 42x2 D 102412 102412.4 42x2 D 103412 103412.4 42x2 D 102912 102912.4 103512 103512.4
L 160 42 48x2 D 102413 102413.4 48x2 D 103413 103413.4 48x2 D 102913 102913.4 103513 103513.4
S 630 6 12x1.5 C 102214 102214.4 12x1.5 C 103214 103214.4 12x1.5 C 102714 102714.4 103514 103514.4
S 630 8 14x1.5 C 102215 102215.4 14x1.5 C 103215 103215.4 14x1.5 C 102715 102715.4 103515 103515.4
S 630 10 16x1.5 C 102216 102216.4 16x1.5 C 103216 103216.4 16x1.5 C 102716 102716.4 103516 103516.4
S 630 12 18x1.5 C 102217 102217.4 18x1.5 C 103217 103217.4 18x1.5 C 102717 102717.4 103517 103517.4
S 630 14 20x1.5 C 102218 104218.4 20x1 C 103218 103218.4 20x1.5 C 102718 102718.4 103518 103518.4
S 400 16 22x1.5 C 102219 102219.4 22x1.5 C 103219 103219.4 22x1.5 C 102719 102719.4 103519 103519.4
S 400 20 27x2 D 102420 102420.4 27x2 D 103420 103420.4 27x2 D 102920 102920.4 103520 103520.4
S 400 25 33x2 D 102421 102421.4 33x2 D 103421 103421.4 33x2 D 102921 102921.4 103521 103521.4
S 400 30 42x2 D 102422 102422.4 42x2 D 103422 103422.4 42x2 D 102922 102922.4 103522 103522.4
S 315 38 48x2 D 102423 102423.4 48x2 D 103423 103423.4 48x2 D 102923 102923.4 103523 103523.4
Adjustable Male Stud Elbows Adjustable Male Stud Adjustable Male Stud Barrel Tees
Branch Tees
Series Bar Tube M With Male Stud Without Stud M With Male Stud Without Stud M With Male Stud Without Stud
Ø mm B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring B3 Ring B4 Ring
L 315 6 10x1 104404 104404.4 104204 104204.4 10x1 105204 105204.4 105004 105004.4 10x1 104804 104804.4 104604 104604.4
L 315 8 12x1.5 104405 104405.4 104205 104205.4 12x1.5 105205 105205.4 105005 105005.4 12x1.5 104805 104805.4 104605 104605.4
L 315 10 14x1.5 104406 104406.4 104206 104206.4 14x1.5 105206 105206.4 105006 105006.4 14x1.5 104806 104806.4 104606 104606.4
L 315 12 16x1.5 104407 104407.4 104207 104207.4 16x1.5 105207 105207.4 105007 105007.4 16x1.5 104807 104807.4 104607 104607.4
L 315 15 18x1.5 104408 104408.4 104208 104208.4 18x1.5 105208 105208.4 105008 105008.4 18x1.5 104808 104808.4 104608 104607.4
L 315 18 22x1.5 104409 104409.4 104209 104209.4 22x1.5 105209 105209.4 105009 105009.4 22x1.5 104809 104809.4 104609 104609.4
L 160 22 26x1.5 104410 104410.4 104210 104210.4 26x1.5 105210 105210.4 105010 105010.4 26x1.5 104810 104810.4 104610 104610.4
L 160 28 33x2 104411 104411.4 104211 104211.4 33x2 105211 105211.4 105011 105011.4 33x2 104811 104811.4 104611 104611.4
L 160 35 42x2 104412 104412.4 104212 104212.4 42x2 105212 105212.4 105012 105012.4 42x2 104812 104812.4 104612 104612.4
L 160 42 48x2 104413 104413.4 104213 104213.4 48x2 105213 105213.4 105013 105013.4 48x2 104813 104813.4 104613 104613.4
S 630 6 12x1.5 104414 104414.4 104214 104214.4 12x1.5 105214 105213.4 105014 105014.4 12x1.5 104814 104814.4 104614 104614.4
S 630 8 14x1.5 104415 104415.4 104215 104215.4 14x1.5 105215 105215.4 105015 105015.4 14x1.5 104815 104815.4 104615 104615.4
S 630 10 16x1.5 104416 104416.4 104216 104216.4 16x1.5 105216 105216.4 105016 105016.4 16x1.5 104816 104816.4 104616 104616.4
S 630 12 18x1.5 104417 104417.4 104217 104217.4 18x1.5 105217 105217.4 105017 105017.4 18x1.5 104817 104817.4 104617 104617.4
S 630 14 20x1.5 104418 104418.4 104218 104218.4 20x1.5 105218 105218.4 105018 105018.4 20x1.5 104818 104818.4 104618 104618.4
S 400 16 22x1.5 104419 104419.4 104219 104219.4 22x1.5 105219 105219.4 105019 105019.4 22x1.5 104819 104819.4 104619 104619.4
S 400 20 27x2 104420 104420.4 104220 104220.4 27x2 105220 105220.4 105020 105020.4 27x2 104820 104820.4 104620 104620.4
S 400 25 33x2 104421 104421.4 104221 104221.4 33x2 105221 105221.4 105021 105021.4 33x2 104821 104821.4 104621 104621.4
S 400 30 42x2 104422 104422.4 104222 104222.4 42x2 105222 105222.4 105022 105022.4 42x2 104822 104822.4 104622 104622.4
S 315 38 48x2 104423 104423.4 104223 104223.4 48x2 105223 105223.4 105023 105023.4 48x2 104823 104823.4 104623 104623.4
To specify Stainless Steel, change 2nd digit in part number from “0” to “1”.
EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX
Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
434-05
CAST S.P.A.
METRIC FLARELESS STEEL TUBE FITTINGS (B.S.P. THREAD) - DIN 2353
Male Stud Couplings Male Stud Male Stud Couplings Male Stud Elbows
Couplings with Elastomer Seal
Form C: Taper
Form D: Parallel
(Rated pressure valid
only with tapered ports.)
Thread:
Thread: B.S.P. Taper
B.S.P. Parallel
Thread: B.S.P. Taper or Parallel
Series Bar Ø Tube G Part No. G Part No. Part No. G Form Part No.
mm w/ B3 Ring w/ B4 Ring w/ B3 Ring w/ B4 Ring w/ B3 Ring w/ B4 Ring w/ B3 Ring w/ B4 Ring
LL 100 4 1/8” 101701 – – – – 100501 – 1/8” C 102001 –
LL 100 6 1/8” 101702 – – – – 100502 – 1/8” C 102002 –
LL 100 8 1/8” 101703 – – – – 100503 – 1/8” C 102003 –
L 315 6 1/8” 101704 101704.4 1/8” 100304 100304.4 100504 100504.4 1/8” C 102004 102004.4
L 315 8 1/4” 101705 101705.4 1/4” 100305 100305.4 100505 100505.4 1/4” C 102005 102005.4
L 315 10 1/4” 101706 101706.4 1/4” 100306 100306.4 100506 100506.4 1/4” C 102006 102006.4
L 315 12 3/8” 101707 101707.4 3/8” 100307 100307.4 100507 100507.4 3/8” C 102007 102007.4
L 315 15 1/2” 101708 101708.4 1/2” 100308 100308.4 100508 100508.4 1/2” C 102008 102008.4
L 315 18 1/2” 101709 101709.4 1/2” 100309 100309.4 100509 100509.4 1/2” C 102009 102009.4
L 160 22 3/4” 101710 101710.4 3/4” 100310 100310.4 100510 100510.4 3/4” C 102010 102010.4
L 160 22 – – – – – – – – 3/4” D 102310 102310.4
L 160 28 1” 101711 101711.4 1” 100311 100311.4 100511 100511.4 1” D 102311 102311.4
L 160 35 1-1/4” 101712 101712.4 1-1/4” 100312 100312.4 100512 100512.4 1-1/4” D 102312 102312.4
L 160 42 1-1/2” 101713 101713.4 1 1/2” 100313 100313.4 100513 100513.4 1-1/2” D 102313 102313.4
S 630 6 1/4” 101714 101714.4 1/4” 100314 100314.4 100514 100514.4 1/4” C 102014 102014.4
S 630 8 1/4” 101715 101715.4 1/4” 100315 100315.4 100515 100515.4 1/4” C 102015 102015.4
S 630 10 3/8” 101716 101716.4 3/8” 100316 100316.4 100516 100516.4 3/8” C 102016 102016.4
S 630 12 3/8” 101717 101717.4 3/8” 100317 100317.4 100517 100517.4 3/8” C 102017 102017.4
S 630 14 1/2” 101718 101718.4 1/2” 100318 100318.4 100518 100518.4 1/2” C 102018 102018.4
S 400 16 1/2” 101719 101719.4 1/2” 100319 100319.4 100519 100519.4 1/2” C 102019 102019.4
S 400 20 3/4” 101720 101720.4 3/4” 100320 100320.4 100520 100520.4 3/4” C 102020 102020.4
S 400 25 1” 101721 101721.4 1” 100321 100321.4 100521 100521.4 1” D 102321 102321.4
S 400 30 1-1/4” 101722 101722.4 1-1/4” 100322 100322.4 100522 100522.4 1-1/4” D 102322 102322.4
S 315 38 1-1/2” 101723 101723.4 1-1/2” 100323 100323.4 100523 100523.4 1-1/2” D 102323 102323.4
Male Stud Barrel Tees Male Stud Branch Tees Adjustable Male Stud Adjustable Male
Elbows w/ Male Stud Stud Elbows
Form C: Taper
Form D: Parallel
(Rated pressure valid
only with tapered ports.)
Thread: B.S.P. Taper or Parallel Thread: B.S.P. Taper or Parallel Thread: B.S.P. Parallel
Series Bar Ø Tube G Form Part No. G Form Part No. G Part No. Part No.
mm w/ B3 Ring w/ B4 Ring w/ B3 Ring w/ B4 Ring w/ B3 Ring w/ B4 Ring w/ B3 Ring w/ B4 Ring
LL 100 4 1/8” C 103001 – 1/8” C 102501 – – – – – –
LL 100 6 1/8” C 103002 – 1/8” C 102502 – – – – – –
LL 100 8 1/8” C 103003 – 1/8” C 102503 – – – – – –
L 315 6 1/8” C 103004 103004.4 1/8” C 102504 102504.4 1/8” 104304 104304.4 104204 104204.4
L 315 8 1/4” C 103005 103005.4 1/4” C 102505 102505.4 1/4” 104305 104305.4 104205 104205.4
L 315 10 1/4” C 103006 103006.4 1/4” C 102506 102506.4 1/4” 104306 104306.4 104206 104206.4
L 315 12 3/8” C 103007 103007.4 3/8” C 102507 102507.4 3/8” 104307 104307.4 104207 104207.4
L 315 15 1/2” C 103008 103008.4 1/2” C 102508 102508.4 1/2” 104308 104308.4 104208 104208.4
L 315 18 1/2” C 103009 103009.4 1/2” C 102509 102509.4 1/2” 104309 104309.4 104209 104209.4
L 160 22 3/4” D 103310 103310.4 3/4” D 102810 102810.4 3/4” 104310 104310.4 104210 104210.4
L 160 28 1” D 103311 103311.4 1” D 102811 102811.4 1” 104311 104311.4 104211 104211.4
L 160 35 1-1/4” D 103312 103312.4 1-1/4” D 102812 102812.4 1-1/4” 104312 104312.4 104212 104212.4
L 160 42 1-1 /2” D 103313 103313.4 1-1/2” D 102813 102813.4 1-1/2” 104313 104313.4 104213 104213.4
S 630 6 1/4” C 103014 103014.4 1/4” C 102514 102514.4 1/4” 104314 104314.4 104214 104214.4
S 630 8 1/4” C 103015 103015.4 1/4” C 102515 102515.4 1/4” 104315 104315.4 104215 104215.4
S 630 10 3/8” C 103016 103016.4 3/8” C 102516 102516.4 3/8” 104316 104316.4 104216 104216.4
S 630 12 3/8” C 103017 103017.4 3/8” C 102517 102517.4 3/8” 104317 104317.4 104217 104217.4
S 630 14 1/2” C 103018 103018.4 1/2” C 102518 102518.4 1/2” 104318 104318.4 104218 104218.4
S 400 16 1/2” C 103019 103019.4 1/2” C 102519 102519.4 1/2” 104319 104319.4 104219 104219.4
S 400 20 3/4” D 103320 103320.4 3/4” D 102820 102820.4 3/4” 104320 104320.4 104220 104220.4
S 400 25 1” D 103321 103321.4 1” D 102821 102821.4 1” 104321 104321.4 104221 104221.4
S 400 30 1-1/4” D 103322 103322.4 1-1/4” D 102822 102822.4 1-1/4” 104322 104322.4 104222 104222.4
S 315 38 1-1/2” D 103323 103323.4 1-1/2” D 102823 102823.4 1-1/2” 104323 104323.4 104223 104223.4
To specify Stainless Steel, change 2nd digit in part number from “0” to “1”.
EAST COAST -- Somerset, NJ GULF COAST -- Houston, TX
Tel: 732-247-2300 • Fax: 732-247-7258 Tel: 713-682-2400 • Fax: 713-682-2481
435-05
436-05
Male
Tube BSPP, BSPT Part No. Male NPT Part No.
Series O.D. Thread G Thread
LL 4 R 1/8 taper GE04LLRMS
Very Light 6 R 1/8 taper GE06LLRMS 1/8-27 GE06LL1/8NPTMS
NP 70 bar 8 R 1/8 taper GE08LLRMS 1/8-27 GE08LL1/8NPTMS
8 R 1/4 taper GE08LLR1/4MS
10 R 1/4 taper GE10LLRMS
12 R 1/4 taper GE12LLRMS
12 R 3/8 taper GE12LLR3/8MS
L 6 R 1/8 GE06LRMS 1/8-28 GE06L1/8NPTMS
Light 6 R 1/4 GE06LR1/4MS 1/4-18 GE06L1/4NPTMS
NP 220 bar 6 R 1/4 taper GE06LR1/4KEGMS
6 R 3/8 GE06LR3/8MS
8 R 1/8 taper GE08LR1/8KEGMS 1/4-18 GE08L1/4NPTMS
8 R 1/4 GE08LRMS
8 R 3/8 GE08LR3/8MS
MALE 8 R 1/2 GE08LR1/2MS
10 R 1/4 GE10LRMS 1/4-18 GE10L1/4NPTMS
CONNECTORS 10 R 3/8 GE10LR3/8MS
10 R 1/2 GE10LR1/2MS
12 R 1/4 GE12LR1/4MS 1/4-18 GE12L1/4NPTMS
12 R 1/4 taper GE12LR1/4KEGMS 3/8-18 GE12L3/8NPTMS
12 R 3/8 GE12LRMS 1/2-14 GE12L1/2NPTMS
12 R 1/2 taper GE12LR1/4KEGMS
12 R 1/2 GE12LR1/2MS
NP 112 bar 15 R 3/8 GE15LR3/8MS 1/2-14 GE15L1/2NPTMS
15 R 3/8 taper GE15LR3/8KEGMS
15 R 1/2 GE15LRMS
18 R 1/2 GE18LRMS 1/2-14 GE18L1/2NPTMS
Male NPT Thread 22 R 1/2 GE22LR1/2MS 3/4-14 GE22L3/4NPTMS
22 R 3/4 GE22LRMS
28 R1 GE28LRMS 1 - 11-1/2 GE28L1NPTMS
35 R 1-1/4 GE35LRMS
42 R 1-1/2 GE42LRMS
S 6 R 1/4 GE06SRMS 1/4-18 GE06S1/4NPTMS
Heavy 8 R 1/8 GE08SRMS 1/4-18 GE08S1/4NPTMS
NP 280 bar 8 1/2-14 GE08S1/2NPTMS
10 3/8-18 GE10S3/8NPTMS
10 R 3/8 GE10SRMS 1/2-14 GE10S1/2NPTMS
12 3/8-18 GE12S3/8NPTMS
12 R 3/8 GE12SRMS 1/2-14 GE12S1/2NPTMS
Male BSPP Thread 14 R 1/2 GE14SRMS 1/2-14 GE14S1/2NPTMS
16 R 1/2 GE16SRMS 1/2-14 GE16S1/2NPTMS
NP 112 bar 20 R 3/4 GE20SRMS 3/4-14 GE20S3/4NPTMS
25 R1 GE25SRMS
30 R 1-1/4 GE30SRMS
38 R 1-1/2 GE38SRMS
437-05
Bulkhead
Union
Union
438-05
Weight Pressure
O.D. Wall
Kg/m (Bar)
4,00 1,00 0,07
6,00 1,00 0,12 392
“ 1,50 0,16
“ 2,00 0,20
8,00 1,00 0,17 294
“ 1,50 0,24
“ 2,00 0,30
10,00 1,00 0,22
“ 1,50 0,31 353
“ 2,00 0,40
“ 2,50 0,47
12,00 1,00 0,27
“ 1,50 0,39 294
“ 2,00 0,50
14,00 1,00 0,32
“ 1,50 0,47 235
“ 2,00 0,60
“ 2,50 0,72
“ 3,00 0,82
15,00 1,00 0,35
“ 1,50 0,50 235
“ 2,00 0,65
439-05
440-05
Size Tube Permissible Metre Pounds Per Size Tube Permissible Pounds
O.D. x Wall I.D. Pressure Per 100 One O.D. x Wall I. D. Pressure 100
mm mm kp/cm2 lbs./sq. in. Coil Metre Coil mm mm kp/cm2 lbs./sq. in. Metre
4x1 2 — — 50 — — 6x1 4 145 2000 31
6x1 4 145 2000 50 31 16 8x1 6 109 1500 43
8x1 6 109 1500 50 43 22 10 x 1 8 87 1200 56
10 x 1 8 87 1200 50 56 28 12 x 1 10 71 1000 68
12 x 1 10 71 1000 50 68 34 15 x 1 13 57 1200 86
15 x 1 13 57 800 50 86 43 15 x 1,5 12 87 800 126
15 x 1,5 12 87 1200 50 126 63 18 x 1 16 48 650 105
18 x 1 16 48 650 25 105 27 18 x 1,5 15 72 1000 154
18 x 1,5 15 72 1000 25 154 40 22 x 1 20 38 500 130
22 x 1 20 38 500 25 130 33 22 x 1,5 19 58 800 190
22 x 1,5 19 58 800 25 190 48
441-05
“Seaworthy since 1828” See Our Ad Page for New MOTT Products
0456-03 5/13/05 8:49 AM Page 1
442-05
Phone: 713-641-2288
4380 South Wayside Fax: 713-641-3636
Suite 100 Toll Free: 800-532-2672
Houston, TX 77087 E-mail: sales@accordintl.com
INTERNATIONAL, INC. www.accordintl.com
0457-03 5/2/05 9:59 AM Page 1
443-05
Phone: 713-641-2288
4380 South Wayside Fax: 713-641-3636
Suite 100 Toll Free: 800-532-2672
Houston, TX 77087 E-mail: sales@accordintl.com
INTERNATIONAL, INC. www.accordintl.com
3087-04 5/2/05 9:59 AM Page 1
444-05
MANN TEK
DRY DISCONNECT COUPLINGS
For connecting and disconnecting hoses and pipelines quickly and without spillage.
A turn of 15° clockwise locks the coupler to the adaptor, keeping the piston valves closed in this position. The valves are
opened when the unit is turned 100° further and is closed when a similar turn is made counter-clockwise. All flow is
stopped and a disconnect can be made.
For:
• ship-to-shore, ship-to-ship, ship-to-rig transfers
• marine refueling
• vapor recovery
• ship manifold exchange
• rig gas exchange or temporary vent lines
• wellhead material supply
CONSTRUCTION
Material
Aluminum
Brass/Gunmetal
Stainless Steel AISI 316 1.4571
Hastelloy C-276
Closed Open
Sealing Material
FPM (Viton®) [standard] – For high temperatures, Flat Seal for Threads
synthetic and hydraulic fluids, and a wide range of PUR/Polyurethane
chemicals and heavily oxidizing acids (at medium Teflon® (PTFE)
temperatures).
Temperature: -30°C/-20°F up to +200°C/+400°F Working Pressure
EPDM – Non-flammable hydraulic fluids (e.g., phosphoric Aluminum: PN16 – 230 psi
esters) and fire extinguisher liquids (e.g., Brass/Gun Metal: PN25 – 360 psi
chlorobromomethane). Stainless Steel: PN25 – 360 psi
Temperature: -50°C/-60°F up to +150°C/+300°F
HNBR – Heat-resistant Nitrile Body Sizes
Temperature: -40°C/-40°F up to +150°C/+300°F 56 mm – 3/4" or 1"
NBR (Nitrile) – For petroleum-based hydraulic and 70 mm – 1-1/2" or 2"
lubricating oils, and animal and vegetable oils 105 mm – 2-1/2" or 3"
Temperature: -40°C/-40°F up to +100°C/+210°F 119 mm – 3"
PFPM (Kalrez®) – Superior compound for high tempera- 164 mm – 4"
tures and most chemicals. Combines the chemical
properties of PTFE with the mechanical properties of Thread
FPM. NPT (ANSI B1.20.3)
Temperature: -40°C/-40°F up to +260°C/+500°F BSP (DIN-ISO 228)
FFKM (Chemraz®) – A good alternative to PFPM.
Temperature: -30°C/-20°F up to +230°C/+440°F Flange Units
FMVQ (Fluorosilicone) – For low temperatures, DIN, ASA, TW, TTMA
petroleum-based fuel, oils and lubricants, silicone fluids
and silicone esters, and di-ester oils.
Temperature: -50°C/-60°F up to +230°C/+440°F
445-05
1 2 3
Here a ratchet C-L coupling (studded Secure the matching flange to the C-L The dedicated wrench tightens each
configuration) is bolted to an existing coupling by rotating each cam to a helical cam with a wedging action
ASA hose flange for a one-time hard stop using the bronze spanner that in turn compresses the O-ring
permanent installation. The coupling wrench which is supplied. seal, preventing cam from opening.
is then ready to be joined to a
matching flanged hose, manifold or
pipe of comparable diameter.
Approx. Wt.
Flange O.D.
Dimensions
Number of
Maximum
Thickness
Minimum
Pipe Size
Nominal
Number
of Studs
Locking
Locking
Flange
Range
Range
Cams
(lbs.)
Stud
Seal
I.D.
TM
MMC International Corporation MMC (Europe) Ltd. MMC (Asia) Ltd.
60 Inip Drive So. Nelson Rd., So. Nelson Industrial Estate 7-7, 2-Chome
Inwood, NY 11096-0664 U.S.A. Cramlington, Northumberland Kotonoo-Cho
Keeping You In Control Phone: 1-800-645-7339 NE23 9WF UK Chuo-ku, Kobe 651 Japan
1-800-645-7339 Fax: 1-516-371-3134 Phone: (01670) 738111 Phone: (078) 251-1033
See other MMC products E-mail: mmcinwd@aol.com Telex: 537005 MARINE G Telex: 5624163 OPECK J
elsewhere in this catalog. Web Site: http://www.mmcintl.com Fax: (01670) 738789 Fax: (078) 252-0265
Red Wing 0448 5/3/05 8:16 AM Page 448
446-05
The items above and below this message are from different manufacturers.
IN NEW YORK: COMPOSITE HOSE, GOODYEAR RUBBER HOSE, METAL HOSE, PACKINGS & GASKETS, TANK CLEANING
1566 Richmond Terrace
Staten Island, NY 10310
Ph: 718-273-7300 • Fax: 718-273-6232 APOLLO INTERNATIONAL IN HOUSTON:
Toll Free: 800-695-6769 507 Allen-Genoa, Houston, TX 77017
Internet: http://www.apollointl.com Ph: 713-926-2200 • Fax: 713-926-4812
HOSE & MACHINES, DIAPHRAGM PUMPS, EXPANSION JOINTS & VENTILATION FANS Toll Free: 800-460-4468
0461-03 5/2/05 10:01 AM Page 461
447-05
IN NEW YORK: COMPOSITE HOSE, GOODYEAR RUBBER HOSE, METAL HOSE, PACKINGS & GASKETS, TANK CLEANING
1566 Richmond Terrace
Staten Island, NY 10310
Ph: 718-273-7300 • Fax: 718-273-6232 APOLLO INTERNATIONAL IN HOUSTON:
Toll Free: 800-695-6769 507 Allen-Genoa, Houston, TX 77017
Internet: http://www.apollointl.com Ph: 713-926-2200 • Fax: 713-926-4812
HOSE & MACHINES, DIAPHRAGM PUMPS, EXPANSION JOINTS & VENTILATION FANS Toll Free: 800-460-4468
0450-04 5/2/05 10:02 AM Page 1
448-05
FLEXTRACO B.V.
VAPOR RECOVERY COMPOSITE HOSE
HOSE TYPES
Code Service Inner Tube Cover
Wire Color
0864-GG Oil/Solvents Galvanized Polypropylene Yellow
Steel
0464-SG Chemical Stainless Polypropylene Yellow
Steel 316
0446-SG Chemical Stainless Teflon Yellow
Steel 316
Stainless steel outer wire on request
449-05
FLEXTRACO B.V.
INSULATING FLANGE
Sized from 4” to 16”
450-05
FLEXTRACO B.V.
COMPOSITE CRYOGENIC HOSE
Code 0050 Code 0050 is recommended for use with fully refrigerated conveyants for in-plant
and ship-to-shore applications including the following:
Temperature Range: –50°C to +50°C
–58°F to +122°F Ammonia Butylene Methyl Bromide
Acetaldehyde Dimethylamine Propane
CONSTRUCTION: Butadiene Ethylamine Propadiene
Inner Wire: 316 Stainless Steel Butane/Propane Ethyl Chloride Propylene
Outer Wire: 316 Stainless Steel Butane Methyl Acetylene Vinyl-Chloride
Material: Polyamide Liquid Ethylene at –105°C (–157°F)
Cover: White Liquid Ethane at –88°C (–126°F)
Code 0200 is recommended for use with fully refrigerated conveyants such as
Code 0200 liquid nitrogen and L.N.G. for in-plant and ship-to-shore applications.
Type approved as complying with par.
5.7 and 5.4 of the IMO Code
Inside Working Min. Bend Approximate Max.
Temperature Range: –200°C to +50°C Diameter Pressure Radius Weight Length
–328°F to +122°F in. mm psi bar in. mm lbs./ft. kg/m ft. m
1 25 150 10 6 150 0.60 0,90 65 20
CONSTRUCTION:
1.5 38 150 10 7 175 0.80 1,20 65 20
Inner Wire: 316 Stainless Steel
2 50 150 10 7.5 185 1.55 2,30 65 20
Outer Wire: 316 Stainless Steel
3 80 150 10 11 280 2.95 4,40 65 20
Material: Polyester
4 100 150 10 20 500 4.95 7,30 65 20
Cover: White
5 125 150 10 24 610 7.75 11,50 65 20
6 150 150 10 26 660 9.45 14,00 65 20
8 200 150 10 37 940 12.75 18,90 65 20
10 250 150 10 75 1905 15.00 23,00 50 15
Safety factor 5:1
451-05
TITAN INDUSTRIES
DOCK HOSES END FITTINGS
SW339 & EW339 - 200 PSI
HEAVY-DUTY OIL SUCTION
AND DISCHARGE HOSE
Phone: 713-641-2288
4380 South Wayside Fax: 713-641-3636
Suite 100 Toll Free: 800-532-2672
Houston, TX 77087 E-mail: sales@accordintl.com
INTERNATIONAL, INC. www.accordintl.com
0454-04 5/2/05 10:04 AM Page 466
452-05
TITAN INDUSTRIES
DOCK HOSES
Phone: 713-641-2288
4380 South Wayside Fax: 713-641-3636
Suite 100 Toll Free: 800-532-2672
Houston, TX 77087 E-mail: sales@accordintl.com
INTERNATIONAL, INC. www.accordintl.com
455-04 5/2/05 10:05 AM Page 1
453-05
TITAN INDUSTRIES
MIL-PRF-11588G Type III & IV SS278 1”-4” Hose assemblies rubber synthetic liquid petroleum fuels
dispensing (black cover)
MIL-PRF-370J Type I SS170 1”-6” Soft gas discharge/static wire with tan or black cover
MIL-PRF-370J Type II SW370 1”- 6” Hardwall gasoline suction with tan or black cover
USDA Fire Suction & Discharge SW384 1”,11/2” , 21/2” Forestry suction hose
5100-184b Nov 1979
Revision 2 Dec 1982
MIL-DTL-20176G Type I & Type II SW346 21/2”-4” Sewage and oily waste hose
API 1529/98 5th Edition Type C Grade 1 SS124 1”-11/2” Aviation refueling hose
API 1529/98 5th Edition Type C Grade 2 SS244 11/2”-4” Aviation refueling hose
BS EN1361:1997 Type E SW344 11/2”-4” Aviation fueling & defuel British Standard
454-05
586-411 586-401
Designed for water suction and discharge service in construction A heavy duty water suction and discharge hose for industrial,
and septic tank cleaning operations, and for general industrial construction, agricultural, mining, and other applications where
and agricultural applications where mild chemical resistance low-temperature flexibility is required.
is required. Flexible to –10°F. Compounded to remain flexible at
Lightweight and Easy to Handle. It is especially suited to temperatures as low as –10°F (–22°C). In static applications,
field and outdoor applications because it remains flexible at it will perform at temperatures as low as –30°F (–34°C) and
temperatures for 15° to 150°F (–9° to 65°C), exhibits excellent as high as 150°F (65°C).
ozone and weather resistance, and resists cracking and flaking. Construction:
Construction: Tube: Blue PVC synthetic compound*
Tube: Olive green PVC compound Reinforcement: Rigid PVC compound helix
Reinforcement: Rigid PVC compound helix Cover: Blue PVC/synthetic rubber blend*
(Safety Factor – 3:1 burst) Lengths: 1" – 6" 100 ft. lengths
Cover: Olive green PVC synthetic compound
Fittings: Short shank aluminum, quick-disconnect aluminum,
Lengths: 1" – 4" 100 ft. lengths; 6" 20 ft., 25 ft. & 100 ft. lengths; and aluminum combination nipples. Brass and malleable iron
8" – 10" 20 ft. & 25 ft. lengths are compatible.
Fittings: Short shank aluminum, quick-disconnect aluminum, *Medium High Oil Resistance – RMA designation Class B
and aluminum combination nipples. Brass and malleable iron
short shank, quick-disconnect and combination nipples are
also compatible.
Water Discharge Hose
537-521
For medium duty discharge applications in mining, SPECIFICATIONS
construction, industry, agriculture and marine service. Standard
Temperature range: –10°F to 150°F (23°C to 65°C) I.D. x O.D. Max. WP Wt.
Pkg. Weight
Construction: in. psi MPa ft. lb./ft.
Tube: PVC synthetic polymer *1-1/2 x 1.72 125 .86 300 .20
Reinforcement: Spiral plies plus a longitudinal *2 x 2.09 125 .86 300 .34
ply of synthetic fiber *2-1/2 x 2.79 100 .69 300 .40
Cover: Red PVC synthetic polymer
*3 x 3.24 100 .69 300 .40
Safety Factor: 3:1 burst
*4 x 4.12 100 .69 300 .73
Lengths: 300 ft. continuous length *6 x 6.39 100 .69 300 1.18
Fittings: Short shank aluminum, quick-disconnect, * Built .090" oversize to facilitate coupling hose. The above working
flat seal coupling, aluminum combination nipple and pressures and vacuum ratings are based on ambient temperature of
expansion ring type. above 70°F (21°C) and will vary inversely with temperature changes.
455-05
SPECIFICATIONS
I.D. x O.D. Max. WP Weight
in. mm psi MPa lb./ft. kg./m. SPECIFICATIONS
4 x 4.45 102.1 x 113.1 50 .34 1.44 2.14 I.D. x O.D. Max. WP Bend Radius Weight
*4x 4.59 102.1 x 116.7 50 .34 1.93 2.87 in. psi MPa in. lb./ft. kg./m.
5 x 5.44 127.4 x 139.0 50 .34 1.88 2.77 2 x 2.50 50 .34 5 1.11 1.64
6 x 6.44 152.7 x 164.7 50 .34 2.34 3.48 3 x 3.55 50 .34 7 1.84 2.72
549-152 549-856
Designed for the discharge of dry bulk cement in tank truck and For conveying hot air from compressors to tanks on bulk dry
in-plant service. Capable of handling temperatures of –25° to 180°F. material carriers.
Static Conductive for Safety. The tube is made with static Long Hose Life. Made with a heat-resistant tube and cover
conductive synthetic rubber to reduce the possibility of static capable of withstanding temperatures up to 400°F for long
charge build-up when hose is properly grounded. service life.
Long Lengths. Available in standard 50 ft. and 57 ft. unit lengths. Construction:
Also available in longer lengths up to 400 ft. Please specify on Tube: Black heat-resistant synthetic rubber
your order. Reinforcement: Synthetic fabric with wire helix
Construction: Cover: Heat-resistant black synthetic rubber with orange
Tube: Static conductive synthetic rubber spiral stripe
Reinforcement: Synthetic fabric Lengths: 100 ft. lengths
Cover: Synthetic rubber with white spiral stripe Fittings: Quick acting
Lengths: 57 ft. in 4 in. I.D., 50 ft. in 5 in. and 6 in. I.D. sizes.
Available in lengths up to 400 ft. Please specify on your order.
Fittings: Reattachable quick disconnect coupler and adapter,
combination nipple, one-time fittings
Petroleum Dock Hose
541-532 (Red Stripe)
541-532 SPECIFICATIONS (Nitrile Tube)
541-534 (Orange Stripe) I.D. x O.D. Max. WP Bend Radius Weight
Built with a special cover and reinforce- in.
Plies
psi MPa in. lb./ft. kg./m.
ment to provide greater strength and longer
3 x 3.98 4 225 1.55 11 3.64 5.43
life in petroleum transfer service compared
to standard 200 PSI constructions. 4 x 5.33 6 255 1.55 15 6.07 9.11
6 x 7.38 6 225 1.55 22 9.65 14.39
Built to withstand the day-in, day-out
abuse, cutting, gouging, and scuffing 8 x 9.47 6 225 1.55 30 14.00 20.87
caused by dragging on rough dock surfaces 10 x 11.72 8 225 1.55 40 20.82 31.16
and rubbing between barge and dock. 12 x 13.84 8 225 1.55 60 25.60 42.12
Capable of handling temperatures of –25°
to –200°F.
Surge Protection. 225 PSI provides full protection from testing
and surges typical in dock petroleum transfer service. 541-534 SPECIFICATIONS (Viton Tube)
I.D. x O.D. Max. WP Bend Radius Weight
Construction: in.
Plies
psi MPa in. lb./ft. kg./m.
Tube compounds:
3 x 3.84 6 225 1.55 11 2.89 6.48
Red Stripe: Nitrile synthetic rubber for up to 50% aromatics
4 x 5.17 6 225 1.55 15 5.60 9.27
Orange Stripe: Vitron synthetic rubber for up to 100% aromatics
Reinforcement: Heavy duty synthetic fabric piles with double 6 x 7.38 6 225 1.55 22 9.66 14.48
wire helix 8 x 9.47 6 225 1.55 30 14.02 21.00
Cover: Black Neoprene synthetic rubber 10 x 11.72 8 225 1.55 40 21.42 32.05
Lengths: Up to 100 ft. 12 x 13.84 8 225 1.55 60 23.66 42.12
Fittings: Externally swaged fittings with 150# or 300# flanges
IN NEW YORK: COMPOSITE HOSE, GOODYEAR RUBBER HOSE, METAL HOSE, PACKINGS & GASKETS, TANK CLEANING
1566 Richmond Terrace
Staten Island, NY 10310
Ph: 718-273-7300 • Fax: 718-273-6232 APOLLO INTERNATIONAL IN HOUSTON:
Toll Free: 800-695-6769 507 Allen-Genoa, Houston, TX 77017
Internet: http://www.apollointl.com Ph: 713-926-2200 • Fax: 713-926-4812
HOSE & MACHINES, DIAPHRAGM PUMPS, EXPANSION JOINTS & VENTILATION FANS Toll Free: 800-460-4468
0472-03 5/2/05 10:07 AM Page 1
456-05
SPECIFICATIONS SPECIFICATIONS
I.D. x O.D. Max. WP Bd. Rd. Wt. I.D. x O.D. Max. WP Bd. Rd. Wt.
in. mm psi MPa in. lb./ft. in. mm psi MPa in. lb./ft.
1-1/2 x 1.98 38.1 x 50.4 150 1.0 4 .82 1-1/2 x 2.08 38.1 x 52.7 250 1.7 4 1.15
2 x 2.50 50.8 x 63.5 150 1.0 5 1.07 2 x 2.59 50.8 x 65.9 250 1.7 5 1.44
2-1/2 x 3.09 63.5 x 78.5 150 1.0 6 1.64 2-1/2 x 3.11 63.5 x 78.8 250 1.7 6 1.84
3 x 3.58 76.2 x 91.1 150 1.0 7 1.92 3 x 3.58 76.2 x 95.0 250 1.7 7 2.57
4 x 4.70 101.6 x 119.4 150 1.0 10 2.88 4 x 4.77 101.6 x 121.0 250 1.7 10 3.58
543-650 543-117
Intended for use in low temperature operations at tank truck and A premium high pressure petroleum high transfer hose for
railway service terminals, bulk petroleum stations, and other bulk handling liquids at elevated temperatures from –35°F to 200°F.
handling operations. It remains flexible at temperatures from Construction:
–65°F (–53°C) to 180°F in both suction and discharge service. Tube: Special fuel resistant black Nitrile synthetic rubber
Construction: Reinforcement: Synthetic fabric with wire helix
Tube: Ultra-low temperature oil resistant synthetic rubber Cover: Black Nitrile/PVC synthetic rubber (wrapped finish)
Reinforcement: Synthetic fabric with wire helix Lengths: 100 ft.
Cover: Blue Ultra-low temperature synthetic rubber with red
spiral stripe (wrapped finish) Fittings: Quick acting, reattachable
Lengths: 100 ft.
Fittings: Quick acting, reattachable
SPECIFICATIONS
I.D. x O.D. Max. WP Weight
SPECIFICATIONS
I.D. x O.D. Max. WP Weight in. mm psi MPa lb./ft. kg./m.
in. mm psi MPa lb./ft. kg./m. 1-1/2 x 2.22 38.1 x 56.1 150 1.0 1.32 2.19
2 x 2.48 50.8 x 63.2 150 1.0 .95 1.41 2 x 2.73 50.8 x 69.6 150 1.0 1.68 2.83
3 x 3.50 76.2 x 88.8 150 1.0 1.41 2.12 2-1/2 x 3.23 63.5 x 82.2 150 1.0 2.08 3.62
4 x 4.52 101.6 x 115.0 150 1.0 1.90 2.83 3 x 3.72 76.2 x 98.0 150 1.0 2.89 4.37
6 x 6.63 152.4 x 168.3 150 1.0 3.31 4.94 4 x 4.81 101.6 x 122.2 150 1.0 3.45 5.58
543-331 543-118
Designed for the discharge of petroleum base products in tank Recommended for the transfer of high temperature petroleum based
and industrial applications. Capable of handling temperatures of materials such as tar, asphalt, and hot oils. It is suitable for suction
–35°F to 180°F. and discharge service on tank trucks, tank cars, or at bulk stations.
Highly Versatile. In addition to petroleum based products, it Special Reinforcement Extends Life. A special heat resistant
can handle alkalies, dilute chemicals, and aqueous salt solutions. tube and Kevlar reinforcement withstand temperatures from
Construction: –25 to 350°F (210°C) in continuous service.
Tube: Nitrile synthetic rubber—plus antistatic wires Construction:
Reinforcement: Synthetic fabric (2"-4" = 2 Ply; 6" = 4 Ply) Tube: Black Nitrile synthetic rubber
Cover: Black Nitrile/PVC synthetic rubber Reinforcement: Kevlar reinforced and helix
Lengths: 50 ft. and 100 ft., depending on size. Available in Cover: Black Neoprene synthetic rubber with spiral red stripe
lengths up to 400 ft. Please specify on your order. Lengths: 100 ft.
Fittings: Quick acting, reattachable, or one-time Fittings: Quick acting, reattachable, or one-time
IN NEW YORK: COMPOSITE HOSE, GOODYEAR RUBBER HOSE, METAL HOSE, PACKINGS & GASKETS, TANK CLEANING
1566 Richmond Terrace
Staten Island, NY 10310
Ph: 718-273-7300 • Fax: 718-273-6232 APOLLO INTERNATIONAL IN HOUSTON:
Toll Free: 800-695-6769 507 Allen-Genoa, Houston, TX 77017
Internet: http://www.apollointl.com Ph: 713-926-2200 • Fax: 713-926-4812
HOSE & MACHINES, DIAPHRAGM PUMPS, EXPANSION JOINTS & VENTILATION FANS Toll Free: 800-460-4468
0473-03 5/2/05 10:08 AM Page 1
457-05
in. mm psi MPa in. lb./ft. in. mm psi MPa in. lb./ft.
1/2 x .90 12.7 x 22.6 200 1.38 3 .33 1/2 x .97 12.7 x 24.5 150 1.03 6 .30
3/4 x 1.23 19.1 x 31.4 150 1.03 7 .45
3/4 x 1.16 19.1 x 29.4 200 1.38 3.5 .46
1 x 1.47 25.4 x 37.5 150 1.03 8 .55
1 x 1.40 25.4 x 35.8 200 1.38 4 .60 1-1/4 x 1.73 32.0 x 44.1 150 1.03 9 .70
1-1/4 x 1.67 31.8 x 42.4 200 1.38 4 .73 1-1/2 x 2.03 38.0 x 51.5 150 1.03 10 .95
1-1/2 x 1.91 38.1 x 48.4 200 1.38 5 .84 2 x 2.61 51.2 x 66.2 150 1.03 12 1.22
2 x 2.48 50.8 x 63.1 200 1.38 6 1.22 2-1/2 x 3.11 63.7 x 78.8 150 1.03 15 1.65
2-1/2 x 3.13 63.5 x 79.5 200 1.38 8 1.78 3 x 3.59 76.1 x 91.7 150 1.03 18 2.24
3 x 3.62 76.2. x 92.0 200 1.38 9 2.11 4 x 4.17 102.1 x 119.3 150 1.03 24 3.01
546-065 6 x 6.78 152.7 x 172.5 150 1.03 36 6.14
It handles 98% of 4 x 4.67 101.6 x118.7 200 1.38 10 2.81 546-666
common industrial chemicals in pressure, gravity flow and suction Handles 90% of
service. The temperature range is –40° to 150° F (–40° to 70°C). today’s chemicals in pressure, gravity flow, or suction service.
Construction: Construction:
Tube: Pilosyn (ultra high molecular weight polyethylene) Tube: Clear XLPE (Cross Link Polyethylene)
Reinforcement: Synthetic fabric with double wire helix Reinforcement: Synthetic fabric with double wire helix
Cover: Green EPDM with bright orange longitudinal stripe Cover: Green EPDM synthetic rubber with spiral stripe
Lengths: 100' Lengths: 100 ft. lengths
Fittings: Quick acting, reattachable, or one-time Fittings: Quick acting, reattachable, or one-time
458-05
SPECIFICATIONS
SPECIFICATIONS Max.
Max. Nominal Bend Min. Burst Operating
Nominal Bend Min. Burst Operating I.D. O.D. Radius Pressure Pressure Weight
I.D. O.D. Radius Pressure Pressure Weight in. in. in. psi MPa psi MPa lb./ft.
in. in. in. psi MPa psi MPa lb./ft. 1/4 .532 2.0 12000 82.7 3000 20.6 .16
3/8 .693 2.5 12000 82.7 3000 20.6 .22 3/8 .693 2.5 12000 82.7 3000 20.6 .22
1/2 .820 3.5 12000 82.7 3000 20.6 .30 1/2 .820 3.5 12000 82.7 3000 20.6 .30
IN NEW YORK: COMPOSITE HOSE, GOODYEAR RUBBER HOSE, METAL HOSE, PACKINGS & GASKETS, TANK CLEANING
1566 Richmond Terrace
Staten Island, NY 10310
Ph: 718-273-7300 • Fax: 718-273-6232 APOLLO INTERNATIONAL IN HOUSTON:
Toll Free: 800-695-6769 507 Allen-Genoa, Houston, TX 77017
Internet: http://www.apollointl.com Ph: 713-926-2200 • Fax: 713-926-4812
HOSE & MACHINES, DIAPHRAGM PUMPS, EXPANSION JOINTS & VENTILATION FANS Toll Free: 800-460-4468
0463-04 5/2/05 10:09 AM Page 1
459-05
The corrugated hose is made from strip metal or various alloys. The strip metal is formed into tubes and the edges are inert-arc butt welded. The tube is then
corrugated. Corrugated hose is pressure tight and suited to continuous flexing or vibration. Close pitch is standard.
The flexibility of corrugated metal hose is due to the spring-like quality of the corrugations. It will return to its original position when bending forces are removed.
However, if the hose is bent beyond its minimum recommended bend radius, the hose will take on a permanent set.
The hose is designed to correct problems involving vibration, temperature variations, misalignment, pipe line expansion and contraction, and offset motion.
LENGTHS: Specify when ordering. FITTINGS: Specify when ordering.
COMPLIANCE: All assemblies 4” I.D. and larger are tested and marked in compliance with U.S. Coast Guard regulations.
CONVEYANTS HANDLED: Water for cooling or heating, steam, hydrocarbons, gases and a wide variety of chemicals.
HOW TO ORDER OR REQUEST QUOTATION:
1. Specify Quantity 5. Working Pressure 9. Fittings - complete description should include type and metal alloy.
2. I.D. Size 6. Temperature 10. Special requirements
3. Overall Length 7. Application
4. Hose Type (Part No.) 8. Media (conveyants)
When products are required to conform to a particular regulation, speculation or application this should be stated on the inquiry/order.
Phone: 713-641-2288
4380 South Wayside Fax: 713-641-3636
Suite 100 Toll Free: 800-532-2672
Houston, TX 77087 E-mail: sales@accordintl.com
INTERNATIONAL, INC. www.accordintl.com
0464-04 5/2/05 10:10 AM Page 1
460-05
UNAFLEX INC.
CHEMICAL TRANSFER HOSE – Stainless Steel – Corrugated
Types BW21-1, LW21-1, BWL21-1, BW21-1H and BWA21-1
GUIDE FOR ORDERING
1. Describe service conditions, type of service, movement, product conveyed,
temperature, operating pressure, test pressure.
2. Specify inside diameter of hose or line.
3. Specify overall length (end fitting to end fitting) and quantity.
4. Specify type of hose and alloy of end fittings.
5. Specify type and quantity of end fittings desired. Note: Fittings are available welded
or silver brazed – please specify.
461-05
UNAFLEX INC.
462-05
UNAFLEX INC.
A split wire conduit designed to provide chafing protection A clear FDA formulated PVC tubing for low pressure cold water
and quality appearance for multi-wire harness or cable routing. applications in sink, shower, refrigerator, and live well drain lines.
Also available in High Temperature Nylon.
Series Size Series Size
Series Size Series Size 150 - 0120 1/2” x 250’ lgth 150 -0580 5/8”x 250’ lgth
125-0126 1/2” x 50’ lgth 125 -1006 1” x 50’ lgth
150 - 0140 1/4” x 250’ lgth 150-1000 1”x 100’lgth
125-0146 1/4” x 50’ lgth 125 -1126 1-1/2” x 50’ lgth
150 - 0340 3/4” x 200’ lgth 150-1120 1-1/2” x 50’ lgth
125-0346 3/4” x 50’ lgth 125 -1146 1-1/4” x 50 lgth
125-0386 3/8” x 50’ lgth 150 - 0360 3/16” x 250’ lgth 150-1140 1-1/4” x 100’ lgth
125 -2000 2” x 50 lgth
125-0586 5/8” x 50’ lgth 150 - 1380 3/8” x 250’ lgth 150-1180 1-1/8” x 100’ lgth
150 - 0560 5-1/6” x 250’ lgth
SANITATION W A TER HOSE
463-05
UNAFLEX INC.
350 - 0380 3/8” x 250’ lgth 350 - 2000 2” x 50’ lgth Series Size Series Size
350 - 0560 460-3000 3” x 25’ lgth 460-6000 6” x 25’ lgth
5/16” x 250’ lgth 350 - 2120 2-1/2” x 50’ lgth
350 - 0580 5 / 8” x 1 50’lgth 2-3/8” x 50’ lgth 460-4000 4” x 25’ lgth 460-7000 7” x 25’ lgth
350 - 2380
350 - 1000 1” x 100’ lgth 460-5000 5” x 25’ lgth
464-05
465-05
D80000 easily field adjustable. 83050 OLP 89# 250 3/4" 1.188" 50' 83000 OLP 74# 500
80000 D83075 OLP 96# 250 3/4" 1.188" 75' D83000 OLP 77# 500
Red painted steel is standard. Stainless steel reels are available. D84050 OLP 100# 250 1" 1.500" 50' D84000 OLP 78# 500
C 8 5/16" 11 3/8” 11 3/8" MODEL WGT. P.S.I. I.D. O.D. LGTH. MODEL WGT. P.S.I.
10 1/2" 14 1/4" 1" 15 1/4" 83050 OMP 99# 1250 3/4" 1.188" 50' 83000 OMP 77# 1500
3/
D 4"
HOSE HOSE
10 1/ " 10 1/2"
E 10" 2 HOSE GUIDE ROLLER POSITIONS
7 7/ " 7 7/8"
F 6" 8 SW TW Guide arm position SW is Side Wind
position, TW is Top Wind position and
MODIFICATIONS BW is Bottom Wind position. All 80000
Reels without hose can be modified to handle gasoline and diesel fuel. series reels are shipped in the Side Wind
To modify order, place prefix “F” before model number (F 83000). position unless otherwise requested.
BW
Stainless steel hose reels will increase the life of expensive chemical fluid transfer and wash
down hoses. By properly storing hose when not in use you will also increase occupational
safety by eliminating the tripping hazard of unstored hose and improve sanitation.
Stainless steel hose reels are ideal for food processing, pre-rinse, wash down, chemical
transfer and industrial solvent handling. Also suitable for coastal, offshore and on-board ship
in marine applications where the harsh environment of salt spray requires the use of stainless
steel hose reels. Swivels include Viton® “O” rings.
• Full-flow stainless steel shaft and • Pos-i-latch will maintain the desired
Medium & swivel assures maximum product working length of hose. Mechanism
Models Without Hose Hose Capacity delivery. Exception: 80000 &
Low Pressure assures a positive latch of the hose
Model Wgt. Pressure I.D. O.D. Lgth D 80000
Reels not cataloged with • Heavy duty brackets to eliminate • All reels are permanently factory
hose. Hoses are quoted lbs. psi in. in. ft. lubricated
5600 OLS 23 500 3/8 .690 35 bending due to angular hose pull
separately on request.
5600 OMS 24 3000 3/8 .690 30 • 7000 Series offers weatherproof
7800 OLS 44 500 1/2 .781 50 • Banded drive spring gives smooth gasketed spring motor, assures
Maximum temperature automatic hose retrieval
210°F (99°C) 7600 OMS 55 42 3000 3/8 .690 66 maximum service life
7800 OMS 47 3000 1/2 .820 50
82000 OLS* 81 500 1/2 .781 100 • Multi-position guide arm permits wall, • Vibration-proof self-locking fasteners
Higher temperature floor, ceiling, pit or truck mounting
available on request. 82000 OMS* 83 1500 1/2 .820 75 assures assembly integrity
83000 OLS* 81 500 3/4 1.188 50
• Nylon guide rollers reduce hose drag • 304L grade of steel
Hand crank models 83000 OMS* 83 1250 3/4 1.188 50
D83000 OLS* 76 500 3/4 1.188 75 and abrasion • Passivated for electro polish finish
available for 1/2” (13mm)
& 3/4” (19mm) I.D. hose - D84000 OLS* 77 500 1 1.500 50
specify if desired. D9300 OLS 115 500 3/4 1.188 75 *Series 80000 & D80000 stainless reels have an aluminum fluid path
D9400 OLS 115 500 1 1.500 50 and may not be suitable for all applications.
D9300 OMS 115 3000 3/4 1.188 50
467-05
L-205-B 1-1/2”
WASHDOWN NOZZLE
Cast brass construction – Combination HF-500
fog and straight stream – Twist shutoff and
– 95 GPM standard – 60 or 125 GPM HF-350
optional – U.L. listed – FM approved –
Satin Brass or Chrome plated finish.
L-205-B
HF-500 and HF-350 FOAM EDUCTING
241-N NAVY IN-LINE MASTER STREAM NOZZLES
500 and 350 GPM – 1%, 3%, and 6% proportioning –
FOAM EDUCTOR Optional quick-connect coupling – Optional 3%-6%
90 GPM flow – Detachable metering
valve – Optional shutoff valve – Optional drum pick-up
device is not adjustable (either 3
kit – 2-1/2” rocker lug swivel inlets – Cast brass or
or 6%) – Brass construction –
Chrome plated finish. U.L. listed.
Reinforced clear PVC pick-up
hose – 1-1/2” swivel inlet – 241-N
Finish cast brass – Conforms to
MIL-E-24759 (SH).
LR 1-1/2”
Model: 241-N CELLAR NOZZLE
Hose Size: 1-1/2” For 1-1/2” hose – Four
Maximum Hose Lay: 200’ outlets; two project
Flow Rate: 90 GPM horizontally, one
340 L/Min downward, one upward
Thread Size: 1-1/2” F Inlet LR – Brass construction –
1-1/2” M Outlet CJK Chrome plated finish.
Length: 10”
Weight: 3-3/4 lbs.
468-05
ANSUL INCORPORATED
FIREFIGHTING FOAM CONCENTRATES
(AFFF) CONCENTRATES Firefighting foam is simply a stable mass of small, air-
filled bubbles with a lower density than oil, gasoline, or
water. It is made up of three ingredients: water, foam
concentrate, and air. The water is mixed with the
concentrate to form a foam solution. This solution is
then mixed with air to produce a foam. Ansul foam
concentrates are available in 5 gallon (19 L) pails, 55
gallon (208 L) drums, or in bulk.
001576 001584
469-05
ANSUL INCORPORATED
001564
Visit . . .
www.ansulinfo.com/ma2
800-TO-ANSUL (USA/CAN)
or 715-735-7411 – FAX: 715-732-3608
For additional Marine approved fire protection equipment,
see our page in the advertising section.
0474-04 5/13/05 10:12 AM Page 1
470-05
ANSUL INCORPORATED
MARINE HIGH-PRESSURE CARBON DIOXIDE FIRE SUPPRESSION SYSTEMS
TYPICAL LAYOUT
PRESSURE OPERATED SWITCHES
TIME DELAY SCHEDULE 80 PIPE
WEIGH RAIL
PRESSURE 001565
OPERATED
1/4” SCHD. SIRENS
40 PIPE
BAFFLE NOZZLES
MARINE ACTUATION STATION
As an extinguishing agent, carbon dioxide will not damage cargo The pilot valves can be actuated using several types of manual
or machinery and leaves no residue to clean up. It is electrically and automatic releases; additional cylinder valves are opened
nonconductive and effective on most combustible materials. using manifold backpressure. Accessories include alarms,
Marine carbon dioxide systems consist of one or more steel cylin- switches, and directional or selector valves which allow protection
ders filled with liquid carbon dioxide. A special CV90 cylinder of two or more spaces using a single bank of cylinders.
valve will quickly release carbon dioxide through discharge noz-
zles into the protected space.
Component Material Thread Size/Type Approvals
Cylinder Steel 1-11 1/2 NPT, Female Meets DOT 3A1800 or 3AA1800
CV98 Valve Brass 1-11 1/2 NPT, Male x
1 5/16-12UN-3A Outlet Thread – Male
Safety Relief Valve Brass .6250-18UNF-3B, Male In Accordance with Bureau of Explosives
Valve/Tank Assembly UL (EX-2968), FM Approved, Complies with
Regulations of the U.S. Coast Guard (162.038/7/0)
and meets requirements of NFPA 12.
Shipping Cap Steel 3.125-11 NS1, Female
471-05
ANSUL INCORPORATED
MARINE LOW-PRESSURE CARBON DIOXIDE FIRE SUPPRESSION SYSTEMS
APPLICATION valves, pneumatic timers, discharge nozzles, alarms, and
Common shipboard applications for low pressure carbon pressure switches.
dioxide systems include engine rooms, pump rooms,
machinery spaces, and cargo holds. Mobile offshore drilling APPROVALS
units also contain many hazards in which these fire Marine Low-Pressure Carbon Dioxide Systems are designed in
suppression systems may be applied. As an extinguishing accordance with NFPA 12 “Carbon Dioxide Extinguishing
agent, carbon dioxide will not damage cargo or machinery and Systems.” They are approved by the U.S. Coast Guard and
leaves no residue to clean up. It is electrically nonconductive listed by Underwriters Laboratories.
and effective on most combustible materials.
DESCRIPTION
Each system includes a refrigerated storage vessel containing
liquid carbon dioxide (3.75 to 60 ton capacity). Typically, a
single tank protects two or more spaces using various
actuation, discharge, and control components as required.
These include pressure-operated control valves, manual control
B A
006242
472-05
ANSUL INCORPORATED
MARINE ENGINEERED FIRE SUPPRESSION SYSTEM WITH NITROGEN PILOT CYLINDERS
CLEAN AGENT SYSTEMS AND REMOTE PRESSURE OPERATED ACTUATION
3M™ Novec™ 1230 Fire Protection Fluid has been Item Description Item Description
___ _________ ___ _________
developed as a halon replacement alternative to HFCs,
HCFCs, and PFCs in special hazard, high value 1 Nitrogen pilot cylinder 12 1/4 in. check valve
applications. It has unique qualities that provide the 2 Pilot cylinder flexible discharge bend 13 Marine actuation station – two step
right balance of fire extinguishing performance, end use 3 Pilot valve lever release actuator 14 LT-20-L nitrogen cartridge
safety, and environmental sustainability. Novec 1230 4 Connecting link 15 Siren
fluid is low in toxicity and environment impact. It is a 5 Male straight adaptor 16 Pressure switch
liquid at room temperature, with a low vapor pressure, 6 20 in. stainless steel hose 17 SAPPHIRE tank
which allows for ease in handling, storage, and 7 Manifold relief valve 18 Tank bracket
shipping. Novec 1230 contains no Bromine or Chlorine 8 Vent plug 19 Actuation hose
and has no ozone depletion potential. 9 Actuation line vent fitting 20 Male branch tee
SAPPHIRE systems utilize one or more storage 10 Stop/ 21 Male straight adaptor
containers arranged to provide the protected area with a isolation valve 22 Manifold weld inlet
pre-determined quantity of agent. 11 Time delay 14 23 Discharge hose
Novec 1230 fluid suppresses fires by a combination of 24 Discharge nozzle
physical and chemical means. It does not significantly
deplete the oxygen content in the room. 13 15
A complete system includes one or more containers
12 16
connected to a system of piping and nozzles. Novec
24
1230 fluid is liquid under pressure and is stored in steel
containers, each of which is fitted with a valve specially
designed to allow the contents of the container to
discharge within 10 seconds. When the valve opens, 22
Novec 1230 fluid flows into the distribution piping to the
discharge nozzles where it is rapidly dispersed as a 23
vapor. 7 20 21
9
Engineered Fire Suppression Systems are particularly 8 6 4 10 19
valuable in extinguishing fires in enclosures containing
hazards or equipment where a clean, electrically non- 5 3 11
conductive medium is essential or where the cleaning up 2 1
of foam, water or dry chemical would be a problem.
This Fire Suppression System has been tested and 18
listed by…
17
• Underwriters Laboratories, Inc. (EX-4510)
• USCG (162.161/6/0)
• Underwriters Laboratories of Canada 2 IN. FOUNDATION
(BY SHIP BUILDER)
…as an engineered system for Class B and C fire
suppression, at temperatures between 0 °F to 130 °F 2 IN. FOUNDATION
(BY SHIP BUILDER)
(–18 °C to 55 °C).
473-05
ANSUL INCORPORATED
AUTOPULSE® IQ-301 ANALOG ADDRESSABLE CONTROL UNIT
For Use In Fire Protection Systems
ALPHA-NUMERIC
PROGRAMMING KEYPAD LED INDICATORS
BATTERY
FAULT LED
HIGH RATE
CHARGE LED
80-CHARACTER LCD
(BACK-LIT)
CURSOR AND
ENTER KEYS
CIRCUIT BREAKER
AC POWER
FOUR CONTROL
SWITCHES
001582
FEATURES APPLICATION
• U.S. Coast Guard Approved (No. 161.002/28/0) The AUTOPULSE IQ-301 Analog Addressable Control
Unit is designed for use in the adverse marine
• Underwriters Laboratories Listed (UL Standard 864)
environment. The unit may be programmed for several
• Marine-approved with use of Drip-Shield, configurations to protect multiple fire hazards. The system
Part No. 418940 has been UL tested to meet specific USCG requirements
• Overall 301 point capability (198 intelligent points, for shock, vibration, and corrosion resistance.
4 programmable bell circuits, 99 programmable relays) Analog smoke detector sensitivity is monitored by
• Field programmable on panel or on PC with user- control unit which will indicate a special trouble condition
defined passwords, plus Autoprogram feature if the detector’s sensitivity moves outside the listed
• Walk Test reports two devices set to same address range. All devices can be installed on the single
• Releasing capability of four independent hazards addressable loop with up to 99 analog addressable
detectors and 99 addressable modules for conventional
• Real time clock with European format option smoke detectors, heat detectors, manual pull stations,
• Adjustable delay timer and discharge timers supervisory switches, alarm devices, releasing devices,
• Auto detector test (meets NFPA 72) and relays. The control unit can be programmed
to provide the specific operating sequence required
for the project.
474-05
ANSUL INCORPORATED
DRY CHEMICAL FIRE EXTINGUISHERS AA20
MODEL A10H PK10 C10 AA20 PK20 C20
Extinguisher 429003 429009 429015 429006 429011 429017
Part No.
Bracket Part No. 30865 30865 30865 30937 30937 30937
Agency Capacity 10 lb. (4.54 kg) 10 lb. (4.54 kg) 10 lb. (4.54 kg) 20 lb. (9.07 kg) 20 lb. (9.07 kg) 20 lb. (9.07 kg)
FORAY Purple K PLUS-FIFTY C FORAY Purple-K PLUS-FIFTY C
U.L. Rating 10A:60-B:C 80-B:C 40-B:C 20A:120-B-C 120-B:C 80-B:C
Discharge Time 21 seconds 24 seconds 17 seconds 28 seconds 30 seconds 21 seconds
Maximum 19 ft. (5.8 m) 19 ft. (5.8 m) 19 ft. (5.8 m) 22 ft. (6.7 m) 22 ft. (6.7 m) 22 ft. (6.7 m)
Effective Range
Charged Weight 17 lb., 14 oz. 17 lb., 14 oz. 17 lb., 14 oz. 32 lb., 2 oz. 32 lb., 2 oz. 32 lb., 2 oz.
(with agent) (8.13 kg) (8.13 kg) (8.13 kg) (14.60 kg) (14.60 kg) (14.60 kg)
Height 18 1/2” (47.0 cm) 18 1/2” (47.0 cm) 18 1/2” (47.0 cm) 22 1/2” (57.2 cm) 22 1/2” (57.2 cm) 22 1/2” (57.2 cm)
Width 8 1/2” (21.6 cm) 8 1/2” (21.6 cm) 8 1/2” (21.6 cm) 9 1/2” (24.1 cm) 9 1/2” (24.1 cm) 9 1/2” (24.1 cm)
Depth 5 27/32” (14.8 cm) 5 27/32” (14.8 cm) 5 27/32” (14.8 cm) 7 7/32” (18.3 cm) 7 7/32” (18.3 cm) 7 7/32” (18.3 cm)
002320
Listings/Approvals All models U.L. Listed., D.O.T. Approved; U.S.C.G. Approved (with proper bracket)
Hydrostatic Test Requirement: Once Every 12 Years
475-05
Style 35
LG-25
LINE GAUGES
CAP GAUGE LG-25
Style 34 For use in determining nozzle, static and
HH-PITOT flow pressures
Measures straight tip pressure to • Chrome plated • Available in 1-1/2” and 2-1/2” sizes
determine flow or pumping capacity. • For testing hose and • 0-160 psi pressure gauge
Knife edge on blade cuts stream determining static pressures
cleanly to provide a more accurate • 1/4” NPT petcock to release Style 35
reading. Blade is calibrated for water pressure or trapped air • Available in 2-1/2” and 3” sizes
various tip sizes. Black, rubber- • Available in 1-1/2” and 2-1/2” • Ideal for use in high-rise packs
covered handle grip. sizes • 1-1/2” diameter peanut gauge
0-160 psi gauge standard. Valve for • 1-1/2” 0-300 peanut gauge (0-300) with guard
bleeding off air. Includes protective standard, 2-1/2” Style 32 • 2-1/2” weight: 2 lbs., length: 5-1/2”
carrying case. Hand held pitot fits gauge standard, Style 31 • 3” weight: 1-1/2 lbs., length: 5-1/2”
into rugged carrying case (FK-232) gauge optional on 2-1/2” • Grade B 3%-2%-3% accuracy
with foam cushion. • 1-1/2” weight: 1-5/8 lbs.,
19” W x 13-3/8” D x 7” H length: 5-1/2
• 2-1/2” weight: 3 lbs., length: 6”
476-05
477-05
478-05
479-05
Phone: 713-641-2288
4380 South Wayside Fax: 713-641-3636
Suite 100 Toll Free: 800-532-2672
Houston, TX 77087 E-mail: sales@accordintl.com
INTERNATIONAL, INC. www.accordintl.com
0482-04 5/3/05 7:22 AM Page 482
480-05
Phone: 713-641-2288
4380 South Wayside Fax: 713-641-3636
Suite 100 Toll Free: 800-532-2672
Houston, TX 77087 E-mail: sales@accordintl.com
INTERNATIONAL, INC. www.accordintl.com
0483-04 5/3/05 7:22 AM Page 1
481-05
482-05
Custom Cabinets
For storage of fire hose and accessories. Made to order in a variety of sizes and
materials. Specify the following when ordering:
• Dimensions (L x W x H) • Cabinet Color
• Style White Blue
Surface Red Green
Recessed Other (specify)
Semi Recessed • Material
• Type Steel
For pin rack Aluminum
For hump rack Fiberglass
For pin rack & extinguisher • Door Style
For hump rack & extinguisher Solid
• Hose (length & size) Full Glass
• Valves (number & size) (Specify left or right)
483-05
SILBRAZE TO HOSE
378 SL 379 SL
378 SL – Slotted Double Male Adapter
Same size thread both ends. Supplied in cast brass.
Sizes: 1-1/2”, 2-1/2” & 4”
958 957
379 SL – Slotted Double Female Swivel Adapter
Swivels on both ends so that either end may be tightly attached
and other end will turn freely. Supplied in cast brass. 958 – Double Male Silbraze Adapter
Sizes: 1-1/2”, 2-1/2” & 4” Designed for brazing to silbraze valves, flanges and fittings.
Silbraze male one end with male hose thread other end.
Cast brass. Sizes: 1/2”, 3/4”, 1”, 1-1/2”, 2”, 2-1/2” & 4”
937 R 936 R
484-05
SPRAY/JET NOZZLE
The nozzles are available with the following outlet V12:. . . . . . . 2100 012
areas corresponding to diameters 12, 16 & 19 mm. V16:. . . . . . . 2100 016
V19:. . . . . . . 2100 019
Fiberglass Cabinets
Jet/spray branch pipe 2" (51 mm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2102 051
Applicator pipe 6 ft. (2 m) with V12 nozzle. . . . . . . . . . . . . . . . . . . . . . 2100 216
CABINETS
Cabinet Fiberglass for fire hose max. 20 m . . . . . . . . . . . . . . . . . . . . . 0199 005
V12: 2100 012
HYDRANT V16: 2100 016
Hydrant Valve 2" w/Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2000 051 V19: 2100 019
Hydrant Valve w/2" male thread wo/flange . . . . . . . . . . . . . . . . . . . . . 2000 251
485-05
All Fire & Mill hoses are available w/ NST, Storz, Nakajima or John Morris couplings. Please specify coupling type when ordering.
Phone: 713-641-2288
4380 South Wayside Fax: 713-641-3636
Suite 100 Toll Free: 800-532-2672
Houston, TX 77087 E-mail: sales@accordintl.com
INTERNATIONAL, INC. www.accordintl.com
- 04 5/2/05 10:34 AM Page 1
486-05
FLAMEFIGHTER CORP.
PIERCING NOZZLES
Model 974 Comes with two complete 975’s, plus one 30” hose section,
mounting brackets for the apparatus with built-in handle.
Model 975 Includes built-in safety handle for use when nozzle is being
#974
driven in. 8” retainer plate, standard nozzle, strike plate,
NST coupling and end cap are standard.
#975
Model 2500 This unit allows user to determine the length best suited to the
#2500 firefighting situation. Modular sections are 2’, 3’ and 6’ long.
Develops a 2400 sq. ft. waterball at 150 psi; max GPM 320.
Steel & aircraft aluminum construction.
#902
#910
487-05
Ocefiber cover Reference Number Length Pack Wt. Heavy duty (black Reference Length Pack Wt.
with dichromated Ocefiber Nylon (in.) ( lbs.) polypropylene Number (in.) (lbs.)
hooks, or nylon OD 11-40 NS 11-40 16 4 cover). End fittings T 13-40 16 5
with stainless OD 11-60 NS 11-60 24 5 are dichromated T 13-45 18 5-1/2
steel hooks. OD 11-80 NS 11-80 32 6 steel. T 13-60 24 6
Cord Diameter: OD 11-100 NS 11-100 40 7 Cord diameter: T 13-80 32 7
13/32” (10mm) OD 11-120 NS 11-120 48 8 T 13-100 40 8
13/32” (10mm)
OD 11-140 NS 11-140 56 9 T 13-120 48 9
Packs of 25. OD 11-160 NS 11-160 64 10 Packs of 25. T 13-140 56 10
OD 11-180 NS 11-180 72 11 T 13-160 64 11
T 13-180 72 12
T H E O R I G I NA L BU N G E E C O M PA N Y
25100 S. Normandie Ave., Unit D
Harbor City, CA 90710
Tel: 866-286-4331 • Fax: 800-591-0993
E-mail: sales@bungeeco.com ®
www.bungeeco.com
490-04 5/13/05 2:45 PM Page 1
488-05
For Wing Nuts DOVER MARINE MFG. & SUPPLY CO., INC. For Wing Nuts
Manufacturers of Industrial Marine Equipment
& Swing Nuts, 34-20 56th Street, Woodside, New York 11377 & Swing Nuts,
See Our Telephone: 718-899-3827/8 • Fax: 718-899-6876 See Our
Ad Page E-mail: sales@dovermfg.com Ad Page
Web site: www.dovermfg.com
0491-04 5/2/05 10:47 AM Page 1
489-05
VENT DOG & SKYLIGHT DOG TANK / HATCH COVER DOG & WING NUT
BUTTERFLY NUT & WING NUT
D-2303
D-2306 D-2305 D-2304
Metric Threads DOVER MARINE MFG. & SUPPLY CO., INC. Swing Nuts
Toggle Pins Manufacturers of Industrial Marine Equipment
34-20 56th Street, Woodside, New York 11377 Washer Faced Hex
Hinge Pins Telephone: 718-899-3827/8 • Fax: 718-899-6876 Nuts
Shoulder Eye E-mail: sales@dovermfg.com
Portlight Dogs
Bolts Web site: www.dovermfg.com
0489-04 5/13/05 8:50 AM Page 1
490-05
Left
or Left
Right or
WATERTIGHT Right
DOOR BUSHINGS
WTD-3402-B
Specify I.D., O.D.
and length WTD-3405t WTD-3405u WTD-3405v WTD-3405w WTD-3405x WTD-3405y WTD-3405z
Expandable DOVER MARINE MFG. & SUPPLY CO., INC. Ullage Screens
Manufacturers of Industrial Marine Equipment
Scupper Plugs 34-20 56th Street, Woodside, New York 11377 Flanges
Deck Cover Plates Telephone: 718-899-3827/8 • Fax: 718-899-6876 Rubber Tanker
Ullage Covers E-mail: sales@dovermfg.com Buckets
Web site: www.dovermfg.com
0493-04 5/3/05 6:55 AM Page 1
491-05
G-1904
DOVER MARINE MFG. & SUPPLY CO., INC.
RAPID ACTION DECK COVER
For Tank-Cleaning Openings
Suitable for new construction and conversion.
Bottom View
TRI-CLAMP
Manganese Bronze
G-1904-B
G-1905
Expandable DOVER MARINE MFG. & SUPPLY CO., INC. Ullage Screens
Manufacturers of Industrial Marine Equipment
Scupper Plugs 34-20 56th Street, Woodside, New York 11377 Flanges
Deck Cover Plates Telephone: 718-899-3827/8 • Fax: 718-899-6876 Rubber Tanker
Ullage Covers E-mail: sales@dovermfg.com Buckets
Web site: www.dovermfg.com
0494-04 5/3/05 6:56 AM Page 1
492-05
ULLAGE
ASSEMBLIES
U-2509 U-2500-A
Schedule of Materials Schedule of Materials
Pc. No. Description Material Pc. No. Description Material
1 Cover Steel 1 Cover Bronze
2 Coaming Steel 2 Coaming Steel
3 Yoke Manganese Bronze 3 Yoke Manganese Bronze
4 Dog Bolt Manganese Bronze 4 Stem Brass
5 Swing Nut Manganese Bronze 5 Handle Manganese Bronze
6 Flame Screen Bronze 6 Flame Screen Bronze
7 Gasket Neoprene 7 Gasket Neoprene
8 Clevis Type Hinge Pin Brass 8 Clevis Type Hinge Pin Brass
9 Clevis Type Hinge Pin Brass 9 Toggle Pin Bronze
10 Clevis Type Hinge Pin Brass 10 Keeper Plate Bronze
Sizes available: 6”, 8”, 10” and 12” Sizes available: 6”, 8”, 10” and 12”
ULLAGE SCREEN
Wire Cloth DOVER MARINE MFG. & SUPPLY CO., INC. Deck Covers
Manufacturers of Industrial Marine Equipment
Ullage Covers 34-20 56th Street, Woodside, New York 11377 Deck Drains
Coamings Telephone: 718-899-3827/8 • Fax: 718-899-6876 Scupper Strainers
E-mail: sales@dovermfg.com
Dog Bolts “T” Bolts
Web site: www.dovermfg.com
0495-04 5/2/05 11:06 AM Page 1
493-05
U-2504
Part Number Size
U-2504-06 6”
U-2508 U-2504-08 8”
Brass or Stainless Steel wiper fittings U-2504-10 10”
U-2504-12 12”
with rubber wiper blades.
U-2504-SPC Special up to 20”
Specify O.D. and glass thickness. Specify: Flange O.D., Body O.D. and Overall Height
Glass frame optional.
Bronze ullage screen with fine and
ULLAGE COVER SUB-ASSEMBLIES coarse stainless steel mesh.
Bronze and Aluminum STRONGBACK YOKES
Manganese Bronze & Aluminum
Standard or clevis type
When ordering, specify center-to-center
hole dimension.
REPLACEMENT MESH
1. U-2506-F: Fine 30 x 30 mesh.
3. U-2506-C: Coarse 2 x 2 mesh.
Furnished in any diameter in
U-2502 stainless steel and brass.
2 Complete with Acme threaded Stem, Hex
5. Nut, Wing Nut (Handle), Toggle Pin with TANK CLEANING HOLE
Chain, Hinge Pin, Washers and Cotters. COVER PLATES
4. G-1900
18” diameter
2a SAFETY ALUMINUM GRATING 11/16” thick
10-7/8” bolt holes
2b FOR TANK CLEANING HOLES
on a 15-5/16”
Eliminates accidents from uncovered diameter bolt
1. Cover Plate with Gasket holes. Provides safety, light and air. circle. Available
2. Strong Back (Yoke) in steel or bronze.
2a. Toggle Pin with Chain
2b. Hinge Pin with Washers and Cotters
3. Acme Threaded Stem and Hex Nut COVER PLATE GASKET
4. Wing Nut (Handle)
5. Keeper Plate and Screw G-1908
G-1901 (Std.): 11-7/8” I.D. x 13-7/8” O.D. Vegetable fiber,
When ordering item #1, specify outside neoprene rubber
diameter of Ullage Cover or applicable G-1901A: 15” I.D. x 16-5/8” O.D.
or pressed
pipe size. When ordering item #2,
fiberboard.
specify center to center of holes.
494-05
STUD
R-4300
R-3803
Standard
G-1900a Expandable Scupper Plugs
3/4” x 2-1/2” standard stud size Bronze with Neoprene Sleeve
in Brass or Stainless Steel Part Number Plug Size Bore
R-3803-10 1" 1-1/2"
R-3803-15 1-1/2” 2”
R-4301
R-3803-20 2" 2-1/2”
R-3803-25 2-1/2" 3" Clevis Type
R-3803-30 3" 3-1/2"
R-3803-35 3-1/2" 4"
R-3803-40 4" 4-1/2"
Specify: Diameter, length and material
R-3803-45 4-1/2" 5" (Brass, Steel, or Stainless Steel)
H.D. CAP NUT H. D. HEX NUT R-3803-50 5" 5-1/2"
G-1906 G-1907 R-3803-55 5-1/2” 6”
495-05
Parts available:
PH-3307 Retaining ring wrench
PH-3308 Retaining ring (bezel)
Fixed Portlights DOVER MARINE MFG. & SUPPLY CO., INC. Ring Nuts
Manufacturers of Industrial Marine Equipment Anti-Pilfering
Portlight Glass 34-20 56th Street, Woodside, New York 11377 Screens
Retaining (Bezel) Telephone: 718-899-3827/8 • Fax: 718-899-6876
E-mail: sales@dovermfg.com Retaining Ring
Rings Wrenches
Web site: www.dovermfg.com
0498-04 5/2/05 11:10 AM Page 1
496-05
NON-SPARKING
POLYPROPYLENE
No. B-2520 H.D.
STAINLESS STEEL
NON-SPINNING CABLE
No. Material Length Width For mucking winches. 3/16"
B-2515 Alum. Die Stamped 10-3/4" 4-1/4" Cable with bronze safety
B-2516 Alum. Die Stamped 13-3/4” 4-1/4” swivel hook.
with Wooden Insert
Cast Aluminum B-1095-A 100’ length
B-2401 (Heavy Duty) 12-3/4" 4-1/2" B-1095-B 150’ length
B-2519 Fiberglass 13-3/4" 4" B-1095-C 200’ length
B-2520 Polypropylene H.D. 13-3/4" 4"
Safety Gratings DOVER MARINE MFG. & SUPPLY CO., INC. Tank Cover Plates
Mucking Winch Manufacturers of Industrial Marine Equipment
Cables 34-20 56th Street, Woodside, New York 11377 Sludge Scoops
Safety Hooks
Telephone: 718-899-3827/8 • Fax: 718-899-6876 Cleaning Hoes
E-mail: sales@dovermfg.com
Exp. Scupper Plugs Scrapers
Web site: www.dovermfg.com
0511-03 5/3/05 6:57 AM Page 1
497-05
ENGLISH METRIC
No. Length No. Length
BRONZE HOSE SPANNERS
SR-1000-1 3 ft. SR-2000-1 1m
SR-1000-2 4 ft. SR-2000-2 2m
SR-1000-3 6 ft.
For hose couplings G-1900-C
DECK & GANGWAY STANCHIONS
P-4100A - 1-1/2” Spanner, bronze, for 2” hose coupling
(Up to 40" in Height)
P-4100B - 2-1/2”
BOTTLE HOLDER
ST-6010 ST-6030 ST-6040 B-2412
Cast Galvanized Cast Steel or Stainless Steel
Aluminum Steel Aluminum Dia: 4-5/8"
Length: 8"
"J" BOLTS "U" BOLTS "U" BOLTS with Strap Overall Length: 19-1/4”
With Hex Nuts With Hex Nuts Washers & Hex Nuts
C "J" Bolts and "U" Bolts are available in
Galvanized Steel, Brass, Stainless Steel
H-3500
and Aluminum in all sizes.
D All Sizes
Std. 3/8” x 3” Specify: A, B, C, & D dimensions as well
B
H-3600 B H-3600-A as the material desired.
A B
A: Stock Size
D D
B: Overall Length
A A C: Center to Center
C C D: Thread Length
Economy Deck DOVER MARINE MFG. & SUPPLY CO., INC. Scupper Strainers
Drains Manufacturers of Industrial Marine Equipment Deck Sounding
Traps & Baffles 34-20 56th Street, Woodside, New York 11377 Plugs
Telephone: 718-899-3827/8 • Fax: 718-899-6876
Inv. Vent Ch. Valves E-mail: sales@dovermfg.com
“T” Wrenches
“J” Bolts Web site: www.dovermfg.com “U” Bolts
0500-04 5/2/05 11:11 AM Page 1
498-05
A
A
PROVISION TANK
K-1500 Open Cover
Airtight & Waterproof
Specify Galvanized Steel or LIFE BOAT TANK
Stainless Steel and give dimensions
DOGS & NUTS
A, B, & C when ordering.
K-1500b-1 Bronze
A K-1500b-2 Aluminum
AIR REGISTERS
FOG GONG 2-1/4" Wide RG-101 H.D.
(Lever operated)
G-950 16-3/16" Dia. 24” wide x 30” high.
G-1800
Steel with For rope sizes up to 3”.
Bulkhead mounted. Aluminum
Rawhide Mallet. Galvanized steel welded
construction. Specify length and
width of opening. construction
ALUMINUM FID
F-8000
17-3/4" x 1-3/16" Tapered
499-05
BASKET DATA
Insert dimensions (in inches) opposite the
numbers indicated.
1. Perforation Size
2. Bottom Diameter
3. Height of Basket
4. Height, Overall
5. Dia. across Flange
6. Top Diameter
BALL FLOATS
Stainless Steel and Copper
F-2600-C F2602-V
Spherical Shaped Floats For Vent Check Valves
Specify diameter, length, Specify diameter and
coupling thread and material.
material.
F-2602-S F-2600
With coupling specify Specify ball diameter,
diameter, coupling as well as length &
thread and material. diameter of tubing.
Rust Preventative DOVER MARINE MFG. & SUPPLY CO., INC. Threaded Studs
Lubricants Manufacturers of Industrial Marine Equipment
34-20 56th Street, Woodside, New York 11377 Tank Air
Strainers
Telephone: 718-899-3827/8 • Fax: 718-899-6876 Escape Valve
Inverted Vent E-mail: sales@dovermfg.com
Check Valves Gratings
Web site: www.dovermfg.com
0515-03 5/2/05 11:13 AM Page 515
500-05
All nuts on this page can be used with bolts shown on facing page.
RING NUTS
Material:
Manganese bronze
All nuts can be
tapped N.C. or
Acme thread
501-05
EYE BOLTS
EB-1000
Material: Manganese bronze
Thread: Specify N.C. or Acme
Diameter 1/4” 5/16” 3/8” 1/2” 5/8” 3/4” 7/8” 1”
2” EB-10B0250200 EB-10B0310200 EB-10B0370200 EB-10B0500200 — — — —
3” EB-10B0250300 EB-10B0310300 EB-10B0370300 EB-10B0500300 EB-10B0620300 — — —
L 4” EB-10B0250400 EB-10B0310400 EB-10B0370400 EB-10B0500400 EB-10B0620400 EB-10B0750400 — —
E 5” — — EB-10B0370500 EB-10B0500500 EB-10B0620500 EB-10B0750500 EB-10B0880500 EB-10B1000500
N 6” — — — EB-10B0500600 EB-10B0620600 EB-10B0750600 EB-10B0880600 EB-10B1000600
G 7” — — — — EB-10B0620700 EB-10B0750700 EB-10B0880700 EB-10B1000700
T 8” — — — — EB-10B0620800 EB-10B0750800 EB-10B0880800 EB-10B1000800
H 9” — — — — EB-10B0620900 EB-10B0750900 EB-10B0880900 —
10” — — — — — — EB-10B0881000 —
11” — — — — — — EB-10B0881100 —
12” — — — — — — EB-10B0881200 —
Steel or stainless steel available on special order.
EB-2000
Material: Manganese bronze
Thread: Specify N.C. or Acme Material: Specify manganese bronze or steel
Part No. Bolt Dia. (in.) Bolt Length (in.) Thread: Specify N.C. or Acme
EB-20B0500400 1/2 4 Bolt Diameter: Specify 1/2”, 5/8” or 3/4”
EB-20B0500600 1/2 6
Bolt Length: Specify 6”, 7” or 8”
EB-20B0500750 1/2 7-1/2
EB-20B0500800 1/2 8
EB-20B0500900 1/2 9
EB-20B05001100 1/2 11
EB-20B0620600 5/8 6 TOGGLE PINS
EB-20B0620900 5/8 9 PN-1000
EB-20B0750600 3/4 6
EB-20B0750800 3/4 8
Steel or stainless steel available on special order.
Material:
Specify stainless steel, bronze, steel, galvanized steel, or Monel
Diameter:
Specify 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”
CLEVIS PINS Grip Length (“O”):
PN-3000 Specify 1”, 1-1/2”, 2”, 2-1/2”, 3”, 3-1/2”, 4”, 4-1/2”, 5”, 5-1/2”,
6”, 6-1/2”, 7”, 7-1/2”, 8”, 8-1/2”, 9”, 9-1/2”, 10”, 10-1/2”, 11”
Material: Accessory (if needed):
Specify stainless steel, brass, steel, galvanized steel, or Monel Specify Pad Eye or Clip (specify length of chain or lanyard
Diameter: required.)
Specify 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1”, 1-1/8”, 1-1/4”
Grip Length (“O”):
Specify 1”, 1-1/2”, 2”, 2-1/2”, 3”, 3-1/2”, 4”, 4-1/2”, 5”, 5-1/2”, 6”
Pad Eye Clip
502-05
UL-3400
13” center to center
UL-3700
High clearance
Double clevis
14-1/2” center to center
UL-3300
Single clevis
13-1/4” center to center
SADDLE DOGS
DG-2600 DOUBLE END
5/8” x 5”
SAFETY HOOKS SCRAPERS
Acme threads TL-4200
Manganese bronze TC-6200 HOSE SADDLE
Manganese bronze
Manganese bronze (non-sparking) TC-4000
1-7/8” Wide blade
4-1/2” O. A. Aluminum
12” O. A. length
3/4” Eye For 2” hose
3/4” Opening
TC-1000
For 12-1/2” opening
SPARE PARTS BOXES Two view ports; light is allowed into the tank through one port
EN-5000 while viewing through the other. Glasses are flush with top
Material: Steel (16 ga.) surface. Single lever operates wiper to clean entire viewing area
of both glasses. Constructed of type 304 stainless steel with
A B C aluminum cover. Wiper assembly has 5/8” diameter bars.
Part No.
(in.) (in.) (in.)
Overall size is 15” x 5”.
EN-5010 12 10 10
EN-5020 14 8 8
EN-5030 18 12 6
EN-5040 18 12 12
RETAINING RINGS
EN-5050 18 15 9 PL-3000
EN-5060 22 14 12 Material: Bronze or aluminum
EN-5070 24 12 12 12 Threads per inch
EN-5080 24 15 15
EN-5090 30 18 12 Bronze Aluminum I.D. (in.) O.D. (in.)
EN-5100 30 14 14 PL-3100B PL-3100A 10 10-3/4
EN-5110 36 15 13 PL-3120B PL-3120A 12 12-3/4
EN-5120 36 15 15 PL-3140B PL-3140A 14 14-3/4
EN-5130 42 24 24 PL-3150B PL-3150A 15 15-3/4
PL-3160B PL-3160A 16 16-3/4
PL-3180B PL-3180A 18 18-3/4
504-05
3/4 SQ
A
D
DK-5300 DK-5000
505-05
McNICHOLS COMPANY
HOW TO MEASURE
HOW TO ORDER/SPECIFY WIRE
CONSIDER:
1. Application or use of product (including environment) CLOTH
2. Physical requirements
A. opening size B. percent of open area
(send sample of cloth or screen now
being used if possible)
SPECIFY:
3. Quantity: number of pieces, rolls or screens required
1/2" opening 2 Mesh (count from
4. Material Type: e.g., Stainless Steel 304, Carbon Steel, etc. (clear space between wires) center to center of wires)
5. Width and Length
6. Wire Diameter: in decimals thousands of an inch
7. Wire Opening: provide mesh count per lineal inch or width of open- 1
To Compute Mesh: M= O+D
ing (clear opening between wires) in inches. Also state if square, rec-
tangular or other type of opening shape TOP
1-DM M
8. Construction: specify—welded or woven and type of weave VIEW
9. Special Fabrication: submit drawing for special requirements such To Compute Opening: O= M
as notching, boltholes, special shape, bending, forming, O
calendering etc.
10. Alternates: delivery may be improved if an acceptable substitute is
To Compute Open Area: A = (OM)2 x 100
permitted
M = Meshes per Lineal Inch D = Wire Diameter (in.) O = Width of Opening (in.) Wt. = Weight (lbs.) per 100 sq. ft. (Steel)
.192 .8080 240.3 .192 .5580 324.8 .192 .4330 395.0 .072 .1502 157.0 .063 .1370 133.2 .063 .1037 163.0
1” Center to Center
.177
.162
.8230
.8380
203.7
170.2
.177 .5730 274.7 .177
.162
.4480
.4630
333.5
277.7
4-1/2 Mesh .063
.054
.1592
.1682
118.9
86.4
.054
.047
.1460
.1530
96.7
72.6
.054
.047
.1127
.1197
117.7
88.2
.162 .5880 229.2
6
.148 .8520 141.7 .148 .6020 190.5 .148 .4770 230.5 .047 .1752 65.0 .041 .1590 54.9 .041 .1257 66.5
.135 .8650 117.7 .135 .6150 158.1 .135 .4900 191.0 .041 .1812 49.2 .035 .1650 39.8 .035 .1317 48.1
.120 .8800 92.8 .120 .6300 124.4 .120 .5050 150.2 .035 .1872 35.7 .032 .1680 33.2 .032 .1347 40.0
.105 .8950 71.0 .105 .6450 95.0 .105 .5200 114.5 .032 .1902 29.8 .028 .1720 25.3 .028 .1387 30.5
.092 .9080 54.4 .092 .6580 72.8 .092 .5330 87.9 .025 .1750 20.2 .025 .1417 24.3
.080 .9200 41.1 .080 .6700 54.9 .080 .5450 66.1 .023 .1770 17.0 .023 .1437 20.5
.072 .9280 33.3 .072 .6780 44.5 .072 .5530 53.5 .020 .1467 15.5
.063 .9370 25.5 .063 .6870 34.0 .063 .5620 40.9
.054 .6960 24.9 .054 .5710 30.0 .063 .0799 184.7 .054 .0710 162.7 .054 .0571 177.4
.047 .5780 22.7 .054 .0889 139.7 .047 .0780 120.9 .047 .0641 138.2
.047 .0959 104.2 .041 .0840 90.6 .041 .0701 103.2
.250 .2500 894.6 .207 .2374 680.9 .192 .2080 654.4 .041 .1019 78.4 .035 .0900 65.1 .035 .0761 74.0
.225 .2750 710.6 .192 .2524 578.4 .177 .2230 548.2 .035 .1079 56.5 .032 .0930 54.1 .032 .0791 61.4
7
9
.207 .2930 593.8 .177 .2674 485.7 .162 .2380 453.1
.192 .3080 505.5 .162 .2824 402.3 .148 .2520 373.7 .028 .1149 35.8 .025 .1000 32.6 .025 .0861 36.9
.177 .3230 425.4 .148 .2964 332.5 .135 .2650 307.8 .025 .1179 28.4 .023 .1020 27.5 .023 .0881 31.1
.162 .3380 353.3 .135 .3094 274.3 .120 .2800 240.6 .023 .1199 24.0 .020 .1050 20.7 .020 .0911 23.4
.148 .3520 292.4 .120 .3244 214.8 .105 .2950 182.4 .020 .1229 18.1 .018 .1070 16.8
.135 .3650 241.7 .105 .3394 163.2 .092 .3080 139.0 .018 .1249 14.6 .017 .1080 14.9
2 Mesh
2-1/2
2-1/4
12
14
.054 .4460 37.6 .041 .4034 24.3 .025 .0750 41.2 .023 .0603 42.2 .020 .0514 37.2
.047 .4530 28.4 .023 .0770 34.7 .020 .0633 31.6 .018 .0534 29.9
.041 .4590 21.6 .020 .0800 26.1 .018 .0653 25.5 .017 .0544 26.6
.035 .4650 15.7 .016 .0554 23.5
.015 .0564 20.6
.014 .0574 17.9
.162 .1713 560.4 .135 .1507 429.0 .120 .1300 388.6 .028 .0345 83.6 .025 .0306 75.0 .025 .0250 85.0
.148 .1853 460.2 .120 .1657 349.9 .105 .1450 306.2 .025 .0375 68.9 .023 .0326 66.0 .023 .0270 70.8
.135 .1938 377.6 .105 .1807 263.2 .092 .1580 231.0 .023 .0395 57.7 .020 .0356 49.0 .020 .0300 55.2
.120 .2133 293.9 .092 .1937 199.3 .080 .1700 172.1 .020 .0425 43.0 .018 .0376 39.2 .018 .0320 44.1
.105 .2283 222.0 .080 .2057 148.9 .072 .1780 138.2 .018 .0445 34.5 .017 .0386 34.8 .017 .0330 39.1
.092 .2413 168.7 .072 .2137 119.8 .063 .1870 104.8 .017 .0455 30.7 .016 .0396 30.7 .016 .0340 34.4
.015 .0350 30.1
3-1/2
.080 .2533 126.4 .063 .2227 91.1 .054 .1960 76.4 .016 .0465 27.1 .015 .0406 26.8
16
20
18
.072 .2613 101.9 .054 .2317 66.5 .047 .2030 57.6 .015 .0475 23.7 .014 .0416 23.3 .014 .0360 26.1
4
3
.063 .2703 77.6 .047 .2387 50.2 .041 .2090 43.6 .014 .0485 20.6 .0135 .0421 21.6 .0135 .0365 24.2
.054 .2793 56.7 .041 .2447 38.1 .035 .2150 31.7 .0135 .0490 19.1 .013 .0426 20.0 .013 .0370 22.4
.047 .2863 42.8 .035 .2507 27.6 .032 .2180 26.4 .013 .0495 17.7 .012 .0436 17.0 .012 .0380 19.0
.041 .2923 32.5 .032 .2537 23.1 .028 .2220 20.2 .012 .0505 15.0 .011 .0446 14.2 .011 .0390 15.9
.035 .2983 23.7 .025 .2250 16.1 .011 .0515 12.6 .010 .0456 11.7 .010 .0400 13.1
.032 .3013 19.7 .010 .0525 10.4 .0095 .0460 10.5 .0095 .0405 11.8
.0095 .0530 9.4 .009 .0466 9.5 .009 .0410 10.5
506-05
McNICHOLS COMPANY
FORMULAS FOR DETERMINING
EXPANDED METAL PERCENTAGE OF OPEN AREA AND
HOLES PER SQUARE INCH
Design Terminology
Standard Flattened ROUND PERFORATIONS STAGGERED
BOND Centers=C
SWD
SWO LWO
rs
nte
AND WID Ce
STRTHICKNESS (GTAH C=
ND UG
RA E)
ST LWD
Open Area Formula
Bond Shearing
CONSTRUCTION: Expanded D2 x 90.69 = %
Shearing cuts through where two strands C2
STYLES: Standard or Flattened intersect. Eliminates prongs or jagged edges.
Catwalk Holes per Square Inch
Material is cut on or near center line of bond.
Grating
Stair Treads
Check with manufacturer for bond shearing H.P.S.I. = % Open Area
over 48". 78.54 x D2
Steel U-Edging
Tolerances ROUND PERFORATIONS
MATERIAL: Carbon Steel LWD or SWD ±1/2" design size (special bond STRAIGHT LINE PATTERN
HD Galvanized Steel tolerances on meshes 1/4" and smaller)
Aluminum Centers=C
Stainless Type 304 Random Shearing
Stainless Type 316 Random Sheared—this type of shearing to
SIZES: Specify size desired tolerance generally leaves jagged edges/
prongs and/or incomplete design patterns.
Tolerances
HOW TO ORDER/SPECIFY LWD or SWD ±1/16" on standard and
Open Area Formula
CONSIDER: flattened expanded ±1/4" on grating and
1. Application or use of product. catwalk D2 x 78.54 = %
2. Physical requirements C2
A. percent of open area B. environment Holes per Square Inch
C. loading
SPECIFY: PERFORATED METAL H.P.S.I. = % Open Area
78.54 x D2
1. Material: carbon steel, aluminum, stainless
steel 316 or 304, etc. HOW TO ORDER/SPECIFY
2. Item No.: typically expanded metal or grating is CONSIDER:
specified below 1. Application or use of product
Examples: 2. Physical requirements (open area, strength, etc.)
1/2" #18F 4' SWD x 8' LWD SPECIFY:
Carbon Steel 2. Quantity: number of cut pieces or full sheets
l 1/2" = short way of diamond dimension 3. Material: type of material desired - carbon steel, stainless
l #18 = gauge steel, aluminum, etc.
l “F” = flattened (“S” would indicate standard) 4. Thickness: for steel or stainless steel specify gauge or 1/16” Dia. 1/8” Stg. Ctrs. 5/64” Dia. 7/64” Stg. Ctrs.
l 4' SWD x 8' LWD = size of sheet width x thickness in inches. All other metals specify in inches only. 74 Holes PSI 22.5% O/A 97 Holes PSI 46% O/A
length 5. Width: overall width
l Carbon Steel = material 6. Length: overall length
4.0# Catwalk 10' SWD x 2' LWD 7. Perforation Size, Shape and Arrangement: Staggered
Carbon Steel arrangement (60° pattern) is standard (for screens—
l 4.0# = wt/ per sq. foot of catwalk or grating normally staggered in direction of flow of material).
Straight line or other pattern must be specified; slotted
l 10' SWD x 2' LWD = size of sheet width x
perforations must be noted as parallel to length or width.
length 8. Hole or Bar Centers: (metal between perforations) Center
l Carbon Steel = material to center measures width of bar at point where perforations
3. Quantity: number of pieces - full size or cut are closest. .117” Dia. 5/32” Stg. Ctrs. 1/8” Dia. 3/16” Stg. Ctrs.
9. Blank Margins: dimensions of blank margins, parallel width 51% O/A 33 Holes PSI 40% O/A
pieces required.
and length (+ or - tolerance). Cost increases when blank
4. Shearing: bond or random
margins are required.
5. Finish: hot-dipped galvanized, special, if any 10. Flatness: requirements for flatness.
6. Special Fabrication: circle shearing, cut outs, 11. End Pattern: “finished” or “unfinished end pattern” if
etc., if any available.
7. Accessories: U-Edging (state part no.) 12. Special Requirements: special shearing, leveling, finish or
Stair Tread (state style and size) heat treating if any
3/16” Dia. 1/4” Stg. Ctrs. 3/16” Dia. 5/16” Stg. Ctrs.
18 Holes PSI 50% O/A 33% O/A
507-05
Fill types:
S Steel wire, natural hard, crimped B Brass wire, crimped
SS Stainless steel wire, acid resistant, crimped BS Brass plated steel wire, crimped
Fill types:
S Steel wire, natural hard, crimped B Brass wire, crimped
SS Stainless steel wire, acid resistant, crimped BS Brass plated steel wire, crimped
Products of other sizes, metric or inch, available on request. Please contact us for details.
0510-04 5/2/05 11:21 AM Page 1
508-05
With adapter
PLASTIC ADAPTERS
For Brush Dia. D From Bore d Reduced to Bore d
(in.) (in.) ( in.)
2-3/8 to 5 3/4 1/2 5/8
6 to 12 1-1/4 1/2 5/8 3/4 7/8 1
With thread
D B L T No. of Art. No. Art. No. RPM
(in.) (in.) (in.) (in.) Knots (S-T 0.014”) (S-T 0.020”) Max.
4 3/8 7/8 5/8-11 32 1310058135 1310058150 11000
6 1/2 1-1/4 5/8-11 56 1315058135 1315058150 9000
S-T Steel wire, hardened, straight
?? ?
Having trouble finding THE PRODUCTS
509-05
510-05
511-05
Type 27
For Metal For Masonry Wheel Size (DxTxH) Max. Speed
Part# Part# inch mm RPM
Grinding Wheels 27A1006095 27C1006095 4 x 1/4 x 3/8 100 x 6 x 9.5 15300
27A1006016 27C1006016 4 x 1/4 x 5/8 100 x 6 x 16 15300
• Quality abrasives 27A1003016 27C1003016 4 x 1/8 x 5/8 100 x 3 x 16 15300
and resin bonds 27A1156022 27C1156022 4-1/2 x 1/4 x 7/8 115 x 6 x 22 13300
27A1153022 27C1153022 4-1/2 x 1/8 x 7/8 115 x 3 x 22 13300
27A1256022 27C1256022 5 x 1/4 x 7/8 125 x 6 x 22 12200
• Grid pattern rapidly
27A1506022 27C1506022 6 x 1/4 x 7/8 150 x 6 x 22 10200
removes material 27A1806022 27C1806022 7 x 1/4 x 7/8 180 x 6 x 22 8500
27A2306022 27C2306022 9 x 1/4 x 7/8 230 x 6 x 22 6600
• Cool grinding
characteristics Type 27 with hub
D Wheel Size (DxTxH) Max. Speed
• Good surface finishes Part # Application inch mm RPM
and consistent quality T W/H11560 metal & mason 4-1/2 x 1/4 x 5/8-11 115 x 6 x 16 13330
H W/H12560 metal & mason 5 x 1/4 x 5/8-11 125 x 6 x 16 12200
W/H15060 metal & mason 6 x 1/4 x 5/8-11 150 x 6 x 22 10200
• Reinforced for prolonged W/H18060 metal & mason 7 x 1/4 x 5/8-11 180 x 6 x 16 8500
performance W/H23060 metal & mason 9 x 1/4 x 5/8-11 230 x 6 x 16 6600
512-05
?? ?
Having trouble finding THE PRODUCTS
513-05
?? ?
Having trouble finding THE PRODUCTS
GRACO INC.
PUMP BASED SPRAY PACKAGES
General purpose sprayers for medium pressure and flow 237158 - 74:1 Sprayer
applications. For light to heavy viscosity materials such as This 74:1 is for demanding applications requiring extremely high
anti-corrosion coatings, architectural coatings and coal tar pressures because of high viscosity, hard-to-atomize coatings and very
epoxies used in shipyards and large construction projects. long hose lengths used in shipyards.
244461 - 33:1 Sprayer
• 7250 psi (500 bar) maximum
• 3300 psi (228 bar) maximum fluid fluid working pressure
working pressure
• 4.2 gpm (16 lpm) maximum
• 2.9 gpm (11 lpm) maximum continuous flow at 60 cpm
continuous flow at 60 cpm
33:1
Heavy-duty sprayers for continuous application of medium
to heavy viscosity coatings. Ideal for hard-to-atomize, anti-corrosion
coatings, architectural coatings and coal tar epoxies used in shipyards.
244474 - 45:1 Sprayer
231921 - 30:1 Sprayer
• 4500 psi (310 bar) maximum fluid working pressure
234725 - 30:1 Sprayer, Bare
• 4.0 gpm (15.2 lpm) maximum continuous flow at 60 cpm 234727 - 30:1 Sprayer, with Gun
234726 - 40:1 Sprayer, Bare
244482 - 56:1 Sprayer 234728 - 40:1 Sprayer, with Gun
• 5600 psi (386 bar) maximum fluid working pressure The 30:1 and 40:1 airless units are used for routine maintenance
• 3.4 gpm (12.9 lpm) maximum continuous flow at 60 cpm repair and repainting on board. They handle a wide variety of
coatings, including light to medium viscosity materials. This
Higher pressure sprayers designed to handle a cart design is well balanced allowing easy
wide variety of materials such as anti-corrosion movement on-site and simple access for
coatings, architectural coatings, coal tar epoxies, maintenance. Available in bare and
urethane coatings and zinc-rich primers with complete units.
viscosities ranging from light to heavy to
ultra-high 100% solids. • 3000 psi (210 bar)
maximum fluid
244491 - 68:1 Sprayer
working pressure
• 6800 psi (469 bar) maximum fluid
working pressure • 1.0 gpm (3.8 lpm)
maximum
• 2.9 gpm (11 lpm) maximum continuous continuous flow
flow at 60 cpm
• 1/2 npt (f) air inlet
244500 - 80:1 Sprayer size
• 7250 psi (500 bar) maximum fluid
working pressure 30:1
• 2.3 gpm (8.7 lpm) maximum continuous flow at 60 cpm
515-05
GRACO INC.
Airless Spray Gun Airless Spray Gun
238591 With HD RAC Dripless Tip Guard and 619 Tip, 2-Finger Trigger 248609 Round handle, four-finger trigger, GHD tip guard, NO TIP
235460 With Dripless Flat Tip Guard, 2-Finger Trigger 248610 Round handle, four-finger trigger, 519 flat tip
235461 With Dripless Flat Tip Guard, 4-Finger Trigger 248611 Oval-insulated handle, four-finger trigger, 519 GHD RAC tip
235462 With Dripless Flat Tip Guard, 0.037 in. (0.94 mm) preorifice 248612 Oval-insulated handle, two-finger trigger, 519 GHD RAC tip
248613 Round handle, four-finger trigger, 519 GHD RAC tip
For light, medium and heavy-duty viscosity paints used on ships and other 248614 Round handle, two-finger trigger, 519 GHD RAC tip
large steel or concrete structures.
• 5000 psi (345 bar) maximum fluid A durable high-pressure spray gun for
working pressure heavy-duty viscosity coatings used on ships
• New formed handle reduces fatigue and other large steel or concrete structures.
and increases comfort The gun is made of steel and rated at 7250 psi.
• No adjustment needle makes quick Ergonomic handle and light-weight design
and easy to repair offer comfort even in the toughest
• Patented needle design environments.
increases life
• High Pressure output, 7250 psi (500 bar)
• HD RAC Switch Tip reverses to easily clean plugged tips
Accessories
• Ergonomic Handle improves operator comfort and reduces fatigue
High Performance Fluid Hoses
Hoses offer greater flexibility and easier
movement on the job. Get less pressure Accessories
drop for more performance at the gun,
287450 2-finger trigger kit
an upgraded conductive core to protect
against static charge build-up and a tough 287449 4-finger round trigger kit
urethane jacket to resist abrasion and 287451 4-finger oval insulation trigger kit
chemicals for longer life. 246294 10 in (254 mm) gun extension, 7250 psi (500 bar, 50 MPa)
246295 15 in (380 mm) gun extension, 7250 psi (500 bar, 50 MPa)
246296 18 in (457 mm) gun extension, 7250 psi (500 bar, 50 MPa)
Whip Working pressure: psi (bar, MPa) 246297 180º spray nozzle, 7/8-14 UNC-2B, 7250 psi (500 bar, 50 MPa)
214700 3/16 in. (5 mm) x 2 ft. (610 mm) 3300 (228, 22.8) 248837 Gun repair kit, includes gasket, needle and seat
214701 3/16 in. (5 mm) x 3 ft. (0.9 m) 3300 (228, 22.8) 245994 GHD tip guard kit
238383 1/4 in. (6 mm) x 6 ft. (1.8 m) 5000 (345, 34.5) 287032 Filter, 60 mesh
246193 1/4 in. (6 mm) x 6 ft. (1.8 m) 7250 (500, 50.0) 287033 Filter, 100 mesh
287034 Filter, 60 and 100 mesh combination
Grounded Fluid
223540 1/4 in. (6 mm) x 25 ft. (7.5 m) 3000 (210, 21.0)
238385 1/4 in. (6 mm) x 25 ft. (7.5 m) 5000 (345, 34.5)
223541 1/4 in. (6 mm) x 50 ft. (15 m) 3000 (210, 21.0)
238386 1/4 in. (6 mm) x 50 ft. (15 m) 5000 (345, 34.5)
214703 3/8 in. (10 mm) x 25 ft. (7.5 m) 3000 (210, 21.0)
238395 3/8 in. (10 mm) x 25 ft. (7.5 m) 5000 (345, 34.5)
214705 3/8 in. (10 mm) x 50 ft. (15 m) 3000 (210, 21.0)
238396 3/8 in. (10 mm) x 50 ft. (15 m) 5000 (345, 34.5)
237071 3/8 in (10 mm) x 50 ft. (15 m) 7400 (510, 51.0)
237072 3/8 in. (10 mm) x 50 ft. (15 m) 7400 (510, 51.0)
214920 3/8 in. (10 mm) x 100 ft. (30 m) 3000 (210, 21.0)
215226 1/2 in. (13 mm) x 25 ft. (7.5 m) 4050 (280, 28.0)
215227 1/2 in. (13 mm) x 50 ft. (15 m) 4050 (280, 28.0)
238717 1/2 in. (13 mm) x 50 ft. (15 m) 5000 (345, 34.5)
237213 1/2 in. (13 mm) x 50 ft. (15 m) 7400 (510, 51.0)
516-05
GRACO INC.
PUMP BASED SPRAY PACKAGES
Plural Component Proportioning Unit All units include hoppers, 50 ft (15.3 m) hose, 6 ft (1.8 m) whip hose and
XTR spray gun. All gallons per minute displayed at 40 cpm @ 1:1 ratio.
Sprays tough, 100% solids coatings Hazardous Location Proportioners
under the harshest conditions. 233855 Xtreme Mix 500, standard motor, 45:1, 5.3 gpm (20.1 lpm)
Designed for short pot-life materials, 233859 Xtreme Mix 500, quiet motor, 45:1, 5.3 gpm (20.1 lpm)
easy-to-use, portable and offers 233856 Xtreme Mix 440, standard motor, 56:1, 4.5 gpm (17 lpm)
quick-change selectable ratio. 233860 Xtreme Mix 440, quiet motor, 56:1, 4.5 gpm (17 lpm)
The unit provides ratio assurance 233857 Xtreme Mix 360, standard motor, 68:1, 3.9 gpm (14.8 lpm)
with alarms and auto-shutdown in 233861 Xtreme Mix 360, quiet motor, 68:1, 3.9 gpm (14.8 lpm)
addition to reporting and on-board 233858 Xtreme Mix 290, standard motor, 80:1, 3.1 gpm (11.7 lpm)
diagnostics. 233862 Xtreme Mix 290, quiet motor, 80:1, 3.1 gpm (11.7 lpm)
234616 Xtreme Mix 185, 47:1, 1 gpm (4 lpm)
234838 Xtreme Mix 185, with (2) VISCON HP (240V) heaters,
• Reduce material waste by up
47:1, 1 gpm (4 lpm)
to 25% by mixing on demand 234840 Xtreme Mix 185 with (2) VISCON HP (480V) heaters,
• Quick change, selectable 47:1, 1 gpm (4 lpm)
ratio from 1:1 to 10:1 Non-Hazardous Location Proportioners
in 0.1 increments 233863 Xtreme Mix 500, standard motor, 45:1, 5.3 gpm (20.1 lpm)
• Simple and easy-to-use 233867 Xtreme Mix 500, quiet motor, 45:1, 5.3 gpm (20.1 lpm)
• Standard features include ratio 233864 Xtreme Mix 440, standard motor, 56:1, 4.5 gpm (17 lpm)
assurance, data reporting and 233868 Xtreme Mix 440, quiet motor, 56:1, 4.5 gpm (17 lpm)
onboard diagnostics 233865 Xtreme Mix 360, standard motor, 68:1, 3.9 gpm (14.8 lpm)
233869 Xtreme Mix 360, quiet motor, 68:1, 3.9 gpm (14.8 lpm)
233866 Xtreme Mix 290, standard motor, 80:1, 3.1 gpm (11.7 lpm)
233870 Xtreme Mix 290, quiet motor, 80:1, 3.1 gpm (11.7 lpm)
234617 Xtreme Mix 185, 47:1, 1 gpm (4 lpm)
Stainless Steel Airless Spray Package 234839 Xtreme Mix 185 with (2) VISCON HP (240V) heaters,
47:1, 1 gpm (4 lpm)
232433 234841 Xtreme Mix 185 with (2) VISCON HP (480V) heaters,
This 23:1 sprayer is a lightweight 47:1, 1 gpm (4 lpm)
(48 lbs./21/7 kg) and highly
portable unit for those “hard to Xtreme Mix Proportioners Set-Up for Pressure Feeding
No hoppers, hose or gun; requires mixing manifold
reach” places. Maneuvering
248842 Xtreme Mix 360, standard motor, 68:1, 39 gpm (14.8 lpm)
is easy, reducing the length of
Wall mount units, no hoppers
hose required and making it 234614 Xtreme Mix 185, hazardous locations, 47:1, 1 gpm (4.0 lpm)
practical at the job site. The 23:1 234615 Xtreme Mix 185, non-hazardous locations, 47:1, 1 gpm (4.0 lpm)
package handles a wide range of
coatings for on-board repair and Xtreme Mix Without Built-in Filters for Hazardous Locations
maintenance. 248831 Xtreme Mix 290, standard motor, 80:1, 3.1 gpm (11.7 lpm)
248832 Xtreme Mix 360, standard motor, 68:1, 3.9 gpm (14.8 lpm)
• 2760 psi (190 bar) maximum fluid working pressure 248833 Xtreme Mix 440, standard motor, 56:1, 4.5 gpm (17 lpm)
• 0.5 gpm (1.9 lpm) maximum continuous flow 248834 Xtreme Mix 500, standard motor, 45:1, 5.3 gpm (20.1 lpm)
• 3/8 npt (f) air inlet size (at pump)
Pump Oilers
517-05
Galvanized Funnels
?? ?
Having trouble finding THE PRODUCTS
518-05
519-05
520-05
Model 987
CONTROL HANDLES For 25-50 pound refinery containers or
Model Description Thread 60 pound bulk. Gasket and air vent in lid
3310-008 Control handle only 1/4 NPT assembly makes unit completely dust-
3310-010 handle w/z-swivel 1/4 NPT proof, leak-proof and spill-proof. Ideal for
use in all types of weather. Container
rust-proofed and finished in Lincoln red.
GREASE CARTRIDGE Height 31-3/4”; inside diameter of
container 12-1/2”. Optional follower plate
Model (819094) for Model 987 is 90579.
This 14-1/2 oz. cartridge contains
multi-purpose lithium grease. Fits
any standard size cartridge
grease gun.
TRUCKS and DOLLIES
HAND GUNS Model 477 (810125)
2-wheel truck for Model 877. Model 477
Attaches rigidly to container and
need not be removed when refilling.
Model 479 (810563)
4-caster band-type dolly for Model
Model 2284 877.
Variable stroke grease gun. Full 360° swing positions. 14 oz. cartridge Model 489 (820330)
loading. Develops up to 10,000 psi. For bulk or cartridge use. Suction Dolly for 25-lb., 35-lb., and 30 liter
filling. Standard bulk loading from a dispenser. Model 479
container. (Fits pails used with
Models 870, 820833 and 820834).
Model 274 (805598)
4 caster band dolly for Model
820832.
521-05
BUTTONHEAD ADAPTORS
HIGH PRESSURE GREASE HOSE
When ordering: Specify hose number and add suffix number to
indicate length required. Example: for Hose #42677 in a 10’ length,
order # 42677-10.
Model 42983 Model 26432 Model 42984
Model Inside Outside Couplings Maximum Minimum
40737 (not illustrated) – Standard button- 42984 – Same as 26432, with 23724 No. No. Dia. Recomended Burst
head coupler only, push-on. 7/16”-27 F.T. 1/8” F. pipe adapter. Working Pressure
40736 (not illustrated) – Standard button- 26432 – Giant buttonhead coupler Pressure P.S.I.
head coupler only, pull-on. 7/16”-27 F.T. only. 7/16”-27 F.T.
42983 – Same as 40736, with 23724
42677 1/4” 19/32” 1/2”-27 FBE 5,000 20,000
1/8” F. pipe adapter. 42602 3/8” 3/4” 1/4” MPT 4,000 16,000
HAND & POWER GUN HOSES 43792 3/8” 3/4” 3/8” MBE 4,000 16,000
Model 40917-12 SELF-STORING AIR HOSE
40917-12 – 12” Whip hose only, 3/16” I.D., 10,000 lbs. burst test,
1/8” M.P.T. both ends.
40917-18 – 18” Whip hose only, 3/16” I.D., 10,000 lbs. burst test,
1/8” M.P.T. both ends.
FOR BUTTON HEAD FITTINGS
Model 44230 45046-25 – For use on portable equipment to prevent tangling. 1/4”
I.D. nylon hose, coupled 1/4” N.P.T. (M), 25 ft. long, rating 200 PSI
working pressure. Retracts to coil automatically when released.
Model 44229
44230 – Whip Hose with giant buttonhead coupler and lock sleeve,
15” overall.
44229 – Whip Hose with standard buttonhead coupler and lock
sleeve, 15” overall. Model 2276
2276 – Suction gun with flexible vinyl plastic hose. 1-1/4 pt. or 17 oz.
HYDRAULIC ADAPTERS by weight oil capacity. No-leak plunger. 12”, 3/8” I.D. Hose.
522-05
?? ?
Having trouble finding THE PRODUCTS
523-05
s
External s 74603 10 – 32
7/16 – 14 0.31
Thread 73043 1/4 – 20 Thinwall—Metric
Internal Thread 1/2 – 13 0.37
74043 1/4 – 28 PART NO. INSERT
73053 5/16 – 18 Internal External
Thinwall—Inch Series 74053 5/16 – 24
9/16 – 12 0.43
Carbon Thread Thread
PART NO. INSERT 73063 3/8 – 16 Steel Class 6H Class 6g Length If necessary, KEYSERTS can be removed
5/8 – 11 0.50 without damage to the parent material.
Internal External 74063 3/8 – 24 75051 M5 – .8 M8 – 1.25 8.0
1. Drill out material between keys and
Stainless Carbon Thread Thread (Mod.) 73073 7/16 – 14 75061 M6 – 1 M10 – 1.25 10.0
3/4 – 16 0.62 internal thread with standard drill to
Steel Steel Class 2B Class 2A Length 74073 7/16 – 20 75081 M8 – 1.25 specified depth (refer to charts for
73083 1/2 – 13 M12 – 1.25 12.0 proper dimensions).
73606 73601 10 – 24 77081 M8 – 1
5/16 – 18 0.31 7/8 – 14 0.68
74606 74601 10 – 32 74083 1/2 – 20 75101 M10 – 1.5 2. Bend the keys inward and break off .
73093 9/16 – 12 M14 – 1.5 14.0 3. Remove the old insert using an
73046 73041 1/4 – 20 77101 M10 – 1.25
3/8 – 16 0.37 7/8 – 14 0.81 E-Z out or similar tool.
74046 74041 1/4 – 28 74093 9/16 – 18 75121 M12 – 1.75
73103 5/8 – 11 M16 – 1.5 16.0 4. Install replacement insert into the
73056 73051 5/16 – 18 78121 M12 – 1.25
7/16 – 14 0.43 1 – 12 0.87 original tapped hole.
74056 74051 5/16 – 24 74103 5/8 – 18
73066 73061 3/8 – 16 73123 3/4 – 10
74066 74061 3/8 – 24 1/2 – 13 0.50 74123 3/4 – 16
1-1/4 – 12 1.12 Heavy-Duty—Metric
73076 73071 7/16 – 14 73143 7/8 – 9 PART NO. INSERT
9/16 – 12 0.56 1-3/8 – 12 1.25
74076 74071 7/16 – 20 74143 7/8 – 14 Internal External Master Thread Repair Kits
73086 73081 1/2 – 13 73163 1–8 Carbon Thread Thread Includes Inserts and Installation Tools
5/8 – 11 0.62 1-1/2 – 12 1.37
74086 74081 1/2 – 20 74163 1 – 12 Steel Class 6H Class 6g Length
Internal External Quantity
75042 M4 – .7 M8 – 1.25 8.0
Thread Thread of Inserts
75052 M5 – .8 M10 – 1.25 10.0 Size Size Per Kit
Heavy-Duty—Inch Series Solid—Inch Series 75062 M6 – 1 M12 – 1.25 12.0
Heavy-Duty—Carbon Steel
75082 M8 – 1.25 PART NO. 73002
PART NO. INSERT PART NO. INSERT M14 – 1.5 14.0
77082 M8 – 1
Internal External External 8 – 32 5/16 – 18 5
75102 M10 – 1.5
Stainless Carbon Thread Thread (Mod.) Carbon Thread (Mod.) M16 – 1.5 16.0 10 – 24 3/8 – 16 5
77102 M10 – 1.25
Steel Steel Class 2B Class 2A Length Steel Class 2A Length 10 – 32 3/8 – 16 5
75122 M12 – 1.75
73587 73582 8 – 32 5/16 – 18 0.31 73054 5/16 – 18 0.31 M18 – 1.5 18.0 1/4 – 20 7/16 – 14 5
78122 M12 – 1.25
73607 73602 10 – 24 73064 3/8 – 16 0.31 5/16 – 18 1/2-13 5
3/8 – 16 0.31 75142 M14 – 2
74607 74602 10 – 32 73074 7/16 – 14 0.37 M20 – 1.5 20.0 Thinwall—Metric Coarse—Carbon Steel
77142 M14 – 1.5 PART NO. 75001
73047 73042 1/4 – 20 73084 1/2 – 13 0.43
7/16 – 14 0.37 75162 M16 – 2
— 74042 1/4 – 28 73094 9/16 – 12 0.50 M22 – 1.5 22.0 M5 – .8 M8 – 1.25 5
77162 M16 – 1.5
73057 73052 5/16 – 18 73104 5/8 – 11 0.62 M6 – 1 M10 – 1.25 5
1/2 – 13 0.43 78182 M18 – 1.5 M24 – 1.5 24.0
— 74052 5/16 – 24 73124 3/4 – 16 0.68 M8 – 1.25 M12 – 1.25 5
75202 M20 – 2.5
73067 73062 3/8 – 16 73144 7/8 – 14 0.87 M30 – 2 30.0 M10 – 1.5 M14 – 1.5 5
9/16 – 12 0.50 78202 M20 – 1.5
— 74062 3/8 – 24 74164 1 – 12 0.87 M12 – 1.75 M16 – 1.5 5
78222 M22 – 1.5 M32 – 2 32.0
73077 73072 7/16 – 14 74184 1-1/8 – 12 1.12 Metric Internal/Inch External
5/8 – 11 0.62 75242 M24 – 3
— 74072 7/16 – 20 74204 1-1/4 – 12 1.25 M33 – 2 33.0 Heavy-Duty Equivalent—Carbon Steel
77242 M24 – 2
73087 73082 1/2 – 13 74224 1-3/8 – 12 1.37 PART NO. 75005
3/4 – 16 0.62 Solid threaded inserts are perfect for: M6 – 1 3/8 – 16 5
— 74082 1/2 – 20
— 73092 9/16 – 12
• relocating holes that have been drilled or tapped Solid—Metric M8 – 1.25 1/2 – 13 5
3/4 – 16 0.81 in the wrong place M10 – 1.5 5/8 – 11 5
— 74092 9/16 – 18 • plugging holes or filling in holes that are too big PART NO. INSERT
73107 73102 5/8 – 11 External M12 – 1.75 3/4 – 16 5
7/8 – 14 0.87 M14 – 2 7/8 – 14 5
— 74102 5/8 – 18 Carbon Thread
73127 73122 3/4 – 10
1-1/8 – 12 1.12
Metric Internal/Inch External Steel Class 6g Length
— 74122 3/4 – 16 75084 M8 – 1.25 8.0
— 73142 7/8 – 9
Heavy-Duty Equivalent 77104 M10 – 1.25 10.0
1-1/4 – 12 1.25 PART NO. INSERT
— 74142 7/8 – 14 78124 M12 – 1.25 12.0
— 73162 1–8 Internal External 77144 M14 – 1.5 14.0
— 74162 1 – 12 1-3/8 – 12 1.37 Carbon Thread Thread (Mod.) 77164 M16 – 1.5 16.0
— 74162-14 1 – 14 Steel Class 6H Class 2A Length 78184 M18 – 1.5 18.0
— 73182 1-1/8 – 7 75065 M6 – 1 3/8 – 16 0.31 78204 M20 – 1.5 20.0
1-1/2 – 12 1.62 75085 M8 – 1.25 1/2 – 13 0.43
— 74182 1-1/8 – 12 78224 M22 – 1.5 22.0
— 73202 1-1/4 – 7 75105 M10 – 1.5 5/8 – 11 0.50 78244 M24 – 1.5 24.0
1-5/8 – 12 1.81 75125 M12 – 1.75 3/4 – 16 0.62
— 74202 1-1/4 – 12 77304 M30 – 2 30.0
— 73242 1-1/2 – 6 75145 M14 – 2 7/8 – 14 0.81 77322 M32 – 2 32.0
1-7/8 – 12 2.00 75165 M16 – 2 1 – 12 0.87
— 74242 1-1/2 – 12 77332 M33 – 2 33.0
?? ?
Having trouble finding THE PRODUCTS
524-05
Brass
Stainless – 304 (A2) or ASST – H 160
525-05
METRIC THREADED RODS Steel – Brass – Stainless THREAD DIA.: M 2, 2.3, 2.5, 2.6,
3, 4, 5, 6, 8, 10, 12, 14, 16, 18,
No. 975 – In One Metre Lengths 20, 22, 24, 27, 30, 33, 36, 39,
Quality Grade: 4.6 or 8.8 42, 45, 48, 52, 56
526-05
527-05
METRIC WRENCHES
Illustration Cat. No. Description Openings in mm Material Finish
6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 17, 19, 22, 23, 24,
894 Open End Wrench 25, 27, 30, 32, 36, 38, 41, 46, 50, 55, 60, 65, 70, Alloy Steel Black
75, 80, 85, 90, 95, 100, 105, 110, 120
No. 894
Double 5.5x6, 7x8, 9x11, 10x12, 13x15, 14x17, 17x19,
895 Open End 20x22, 22x24, 27x30, 30x32, 32x36, 36x41, Alloy Steel Black
Wrench 41x46, 46x50, 50x55, 55x60, 65x70, 75x80
No. 895 4x5, 5x6, 5.5x7, 6x7, 7x8, 7x9, 8x9, 10x11, 10x13, 11x12, 12x13,
Double
13x17, 14x15, 14x17, 16x17, 17x19, 17x22, 18x19, 19x22, Chrome/Van Chrome
3110 Open End
19x24, 20x22, 21x23, 22x24, 22x 27, 24x26, 24x27, 24x30, Steel Pl.
Wrench
No. 3110 25x28, 27x30, 27x32, 30x32, 30x36, 32x36, 36x41, 41x46
5.5, 6, 7, 8, 9, 10, 11x11, 12x12, 13x13, 14x14, 15x15, 16x16,
Box Open End
17x17, 18x18, 19x19, 20x20, 21x21, 22x22, 23x23, 24x24, Chrome/Van Chrome
No. 600 600 Combination
25x25, 26x26, 27x27, 28x28, 29x29, 30x30, 32x32, 33x33, Steel Pl.
Wrench
36x36, 38x38, 41x41, 42x42, 46x46, 50x50, 52x52, 55x55, 60x60
No. 838 6x7, 7x8, 8x9, 8x10, 9x11, 10x11, 10x12, 10x13, 11x13,12x13,
Double Box 12x14, 13x15, 13x17, 14x15, 16x17, 17x19, 17x22, 18x19, 19x22,
Chrome/Van Chrome
838 Offset 19x24, 20x22, 21x23, 22x24, 22x27, 24x26, 24x27, 24x30, 25x28,
No. 896 B Steel Pl.
Wrench 26x29, 27x29, 27x30,27x32, 30x32, 30x36, 32x36, 36x41, 38x42,
No. 2300
41x46, 46x50, 55x60, 65x70, 75x80
No. 2400
Tubular 7x8, 9x10, 10x13 ,11x13, 12x14, 13x17, 14x15,
Forged
896 B Hex 17x19, 19x24, 20x22, 24x30, 24x27, 27x30, Plated
Hardened
Wrench 27x32, 30x36, 32x36, 36x41, 41x46, 46x50, 50x55
No. 8 M Striking Face
No. 612 2300 24, 27, 30, 32, 36, 41, 46, 50, 55, 60, Alloy Steel Black
Open End Wrench
65, 70, 75, 80, 85, 90, 95, 100, 105,
Striking Face
No. 904 2400 110, 115, 120, 125, 130 Chrome-Van Black
Box Wrench
No. 420 8M Midget O/E Wrench From 4x4 to 17x17 in one mm steps Chrome-Van Chrome Pl.
612 Split Box Wrench From 8x10 to 30x32 in one mm steps Chrome-Van Chrome Pl.
420 Starter Wrench 11x13, 13x17, 14x16, 14x17, 15x17, 19x22 Chrome-Van Chrome Pl.
No. 905 8x9, 10x11, 12x13, 13x15, 14x15, 16x17,
No. 35 Swivel Socket
35 Chrome-Van Chrome Pl.
Wrench 17x19, 18x19, 20x22, 21x23, 24x27, 30x32
904 Square Tee Wrench 5, 6, 7, 8, 9, 10, 11, 12, 14, 17 – Female Alloy Steel Nickel
No. 248 No. 3030
905 Square Tee Wrench 5, 6, 7, 8, 9, 10, 11, 12, 14, 17 – Male Alloy Steel Plated
248 Square Socket WR 6, 7, 8, 10, 12, 13, 14, 17, 19, 22, 24 Alloy Steel Black
3030 Hex Nut Driver From 3 to 17 in one mm steps Chrome-Van Chrome Pl.
Double Box 6x7,8x9,10x11,12x13, 14x15, 16x17, 18x19,
837 Chrome-Van Chrome Pl.
No. 837 End Wrench 20x22, 21x23, 22x24, 27x32, 30x36, 36x41, 46x50
31 Friction Ratchet Size: 6, 8, 10, 12, 16, 20, 25, 30 Chrome-Van Black
31-IN Exchangeable Inserts Across Flats: 8 to 30 in one mm steps Chrome-Van Black
No. 31
No. 31-IN 1810-H Spanner with Hook 16-20, 25-28, 30-32, 34-36, 40-42, Alloy Steel Black
1810-P Spanner with Pin 45-50, 52-55, 58-62, 68-75, 80-90 Alloy Steel Black
44 Face Spanner 3, 4, 5, 6, 8 Alloy Steel Black
No. 1810-H No. 1810-P
EX Screw Extractor Screw: M3-6, 6-8, 8-11, 11-14, 14-18, 18-24 Chrome-Van Chrome Pl.
8000 Retain. Ring Pliers External – Straight Tip: A0, A1, A2, A3, A4 Chrome-Van Black
No. EX 8000 Retain. Ring Pliers External – Bent Tip: A01, A02, A03, A04 Chrome-Van Black
No. 44
No. 8000 8000 Retain. Ring Pliers Internal – Straight Tip: J0, J1, J2, J3, J4 Chrome-Van Black
No. 8000
8000 Retain. Ring Pliers Internal – Bent Tip: J01, J02, J03, J04 Chrome-Van Black
No. 3110 S-Set Double Open-End 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, Carton
3110 S 6/12 Wrench Set 12 18x19, 20x22, 21x23, 24x27, 25x28, 30x32 Box
600 S Mech. Box Open End 7 8, 10, 13, 17, 19, 22, 24 Case
600 S Indust. Box Open End 10 10, 11, 13, 17, 19, 22, 24, 27, 30, 32 Case
No. 600 S-Set
600 S Profes. Box Open End 15 6 to 14, 17, 19, 22, 24, 27, 32 Pl. Roll
528-05
Nom. Size
Across Flats
mm SCREW NOMINAL DIAMETER – M
0.7 — — — — 1.4, 1.6, 1.8 — — — —
0.9 — — — — 2 — — — —
1.3 1.4 — — — 2.5 — — — —
1.5 1.6, 2 — — — 3 — — — —
2 2.5 — 3 3 4 3 — — —
2.5 3 — 4 4 5 4 — — —
3 4 4 5 5 6 5 M 5x6 — —
4 5 5 6 6 8 6 M 6x8 8
5 6 6 8 8 10 8 M 8x10 10, 1/8 10, 1/8
6 8 8 10 12, 14 10 M 10x12 12 12, 14, 1/4
7 — — 10 — — — — 14, 1/4 —
8 10 10 12 12 16 12 M 12x16 16, 18, 3/8 16, 18, 3/8
10 12 12 14 14, 16 18, 20 14, 16 M 16x20 20, 22, 1/2 20, 22, 1/2
12 14 14 16, 18 18, 20 22, 24 18, 20 M 20x24 24, 26, 27, 3/4 24, 26, 27, 3/4
14 16, 18 16, 18 20, 22 22, 24 — — — — —
17 20, 22 20, 22 24 — — — — 30, 33, 1” 30, 33, 1”
19 24, 27 24, 27 — — — — — 36, 38, 39 36, 38, 39, 1-1/8
22 30 30 — — — — — 42, 45 42, 45, 1-1/4
24 33 33 — — — — — 48, 52, 1-1/2 48, 52, 1-1/2
27 36, 39 36 — — — — — — —
32 42, 45 — — — — — — 56, 60 56, 60, 64, 2”
36 48, 52 — — — — — — — —
Table above will give you the size of the Hex Key to be used with the appropriate socket cap, set screw or plug.
529-05
METRIC KEY SETS No. 6911 S – Hex Key with Guide Sets
Chrome-Vanadium Steel No. XZN S – Fluted Key Sets
No. SPL S – Spline Fluted Key Sets
METRIC SHAFTING
Rods available in one or three meters length
Dia. Tolerance h9 – Polished
530-05
Thread Die Thread Die Thread Die Thread Die Thread Die
Dia. x Pitch Thread O.D.* Dia. x Pitch Thread O.D.* Dia. x Pitch Thread O.D.* Dia. x Pitch Thread O.D.* Dia. x Pitch Thread O.D.*
mm mm mm mm mm mm mm mm mm mm
M 1x0.25 C 16 M 5.5x0.9 C 20 M 13x1 F 38 M 24x1 F 55 M 38x1.5 F 75
M 1.2x0.25 C 16 M 6x1 C 20 M 13x1.5 F 38 M 24x1.5 F 55 M 39x4 C 75
M 1.4x0.3 C 16 M 6x0.5 F 20 M 14x2 C 38 M 24x2 F 55 M 39x1.5 F 75
M 1.5x0.35 C 16 M 6x0.75 F 20 M 14x1 F 38 M 25x1.5 F 55 M 39x2 F 75
M 1.6x0.35 C 16 M 7x1 C 25 M 14x1.25 F 38 M 26x1 F 65 M 39x3 F 75
M 1.7x0.35 C 16 M 7x0.5 F 25 M 14x1.5 F 38 M 26x1.5 F 65 M 40x1.5 F 75
M 1.8x0.35 C 16 M 7x0.75 F 25 M 15x2 C 45 M 27x3 C 65 M 40x2 F 75
M 2x0.4 C 16 M 8x1.25 C 25 M 15x1 F 45 M 27x1.5 F 65 M 40x3 F 75
M 2x0.2 F 16 M 8x0.5 F 25 M 15x1.5 F 45 M 27x2 F 65 M 42x4.5 C 75
M 2x0.25 F 16 M 8x0.75 F 25 M 16x2 C 45 M 28x1 F 65 M 42x1.5 F 75
M 2x0.45 C 16 M 8x1 F 25 M 16x2 F 45 M 28x1.5 F 65 M 42x2 F 75
M 2.2x0.45 C 16 M 9x1.25 C 25 M 16x1.5 F 45 M 28x2 F 65 M 42x3 F 75
M 2.3x0.4 C 16 M 9x0.75 F 25 M 17x2 C 45 M 29x1.5 F 65 M 44x1.5 F 90
M 2.3x0.25 F 16 M 9x1 F 25 M 17x1 F 45 M 30x3.5 C 65 M 45x4.5 C 90
M 2.5x0.45 C 16 M 10x1.5 C 30 M 17x1.5 F 45 M 30x1 F 65 M 45x1.5 F 90
M 2.6x0.45 C 16 M 10x0.5 F 30 M 18x2.5 C 45 M 30x1.5 F 65 M 45x2 F 90
M 2.6x0.35 F 16 M 10x0.75 F 30 M 18x1 F 45 M 30x2 F 65 M 45x3 F 90
M 3x0.5 C 20 M 10x1 F 30 M 18x1.5 F 45 M 30x3 F 65 M 46x1.5 F 90
M 3x0.35 F 20 M 10x1.25 F 30 M 18x2 F 45 M 32x1.5 F 65 M 48x5 C 90
M 3x0.6 C 20 M 11x1.5 C 30 M 19x2.5 C 45 M 32x2 F 65 M 48x1.5 F 90
M 3.5x0.6 C 20 M 11x0.75 F 30 M 19x1.5 F 45 M 33x3.5 C 65 M 48x2 F 90
M 3.5x0.35 F 20 M 11x1 F 30 M 20x2.5 C 45 M 33x1.5 F 65 M 48x3 F 90
M 4x0.7 C 20 M 11x1.25 F 30 M 20x1 F 45 M 33x2 F 65 M 50x1.5 F 90
M 4x0.35 F 20 M 12x1.75 C 38 M 20x1.5 F 45 M 33x3 F 65 M 50x2 F 90
M 4x0.5 F 20 M 12x0.5 F 38 M 20x2 F 45 M 34x1.5 F 65 M 50x3 F 90
M 4x0.75 C 20 M 12x0.75 F 38 M 22x2.5 C 55 M 35x1.5 F 65 M 52x5 C 90
M 4.5x0.75 C 20 M 12x1 F 38 M 22x1 F 55 M 36x4 C 65 M 52x1.5 F 90
M 5x0.8 C 20 M 12x1.25 F 38 M 22x1.5 F 55 M 36x1.5 F 65 M 52x2 F 90
M 5x0.5 F 20 M 12x1.5 F 38 M 22x2 F 55 M 36x2 F 65 M 52x3 F 90
M 5x0.9 C 20 M 13x1.75 C 38 M 24x3 C 55 M 36x3 F 65 — — —
*16 mm (5/8”), 20 mm (13/16”), 25 mm (1”), 30 mm (1-1/4”), 38 mm (1-1/2”), 45 mm (1-13/16”), 55 mm (2-1/4”), 65 mm (2-5/8”), 75 mm (3”), 90 mm (3-5/8”)
531-05
Thread Dia. BSW 9/16 5/8 3/4 7/8 1 1-1/8 1-1/4 1-3/8 1-1/2
Threads / Inch 12 11 10 9 8 7 7 6 6
Across Flats mm 36 41 41 50 50 60 60 60 70
METRIC SOCKETS – 1/4” Drive, 3/8” Drive, 1/2” Drive, 3/4” Drive, 1” Drive
Vanadium Steel – Chrome Plated
Square Drive Nominal Size (Across Flats mm) Square Drive Nominal Size (Across Flats mm)
1/4 D – 6 Point 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 1/2 D – 12 Point 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23,
3/8 D – 6 Point 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 24, 25, 26, 27, 28, 29, 30, 32
3/8 D – 12 Point 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 3/4 D – 6 Point 19, 22, 24, 27, 29, 30, 32, 33, 36, 38, 41, 46, 50, 55, 60
1/2 D – 6 Point 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 3/4 D – 12 Point 19, 22, 24, 27, 29, 30, 32, 33, 36, 38, 41, 46, 50, 55, 60
24, 25, 26, 27, 28, 29, 30, 32 1 D – 12 Point 36, 41, 46, 50, 55, 60, 65, 70, 75, 80
532-05
SET CONSISTS OF
Set
Tap Die Tap Die
No. B A Sizes
Pieces Pieces Wrench Stock
112 – BSW 21 7 1/8, 5/32, 3/16, 1/4, 5/16, 3/8, 1/2 2 5
CP14 – BSF 12 6 3/16, 1/4, 5/16, 3/8, 7/16, 1/2 2 4 103
533-05
WALTON COMPANY
?? ?
Having trouble finding THE PRODUCTS
534-05
WALTON COMPANY
TAP EXTRACTORS
Single Units and Standard Sets
STANDARD SETS
Single Units and Extra Fingers
6-Flute 4-Flute 3-Flute 2-Flute
Walton
Tap
Extractor
Size Standard Sets
#1, #2, #3
#4 (3 mm) — — 10043 10042
Packed in
#5 (1/8”) (3.2 mm) — — 10053 10052
6-compartment
#6 (3.5 mm) — 10064 10063 10062 plastic case
#8 (4 mm) — 10084 10083 10082
#10 (3/16”) (5 mm) — 10104 10103 10102
#12 (5.5 mm) — 10124 10123 10122
1/4” (6 mm) — 10254 10253 10252
9/32” (7 mm) — 10284 — —
5/16” (7 mm, 8 mm) — 10314 10313 10312
11/32” — — 10344 — —
3/8” (9 mm, 10 mm) — 10374 10373 10372
13/32” (10 mm) — 10404 — — Standard Sets
7/16” (11 mm) — 10434 10433 10432 #11, #13, #15
1/2” (12 mm) — 10504 10503 10502
Packed in
9/16” (14 mm) — 10564 10563 — 15-compartment
5/8” (16 mm) — 10624 10623 — plastic case
11/16” (18 mm) — 10684 — —
3/4” (18 mm, 20 mm) — 10754 10753 —
7/8” (22 mm) — 10874 10873 —
1” (24 mm, 25 mm) — 11004 11003 —
1-1/8” (26-28 mm) 11126 11124 — —
1-1/4” (30-32 mm) 11256 11254 — — Sizes Included:
1-3/8” (35-36 mm) 11376 11374 — — No. 1 No. 2 No. 3 No. 11 No. 13 No.15
1-1/2” (38 mm) 11506 11504 — — — — — — 4* 4*
1. It is important that all orders for Tap Extractors or parts should clearly specify the — — — 1/8* 5* 5*
required size and flute style. — — — — 6* 6*
2. List set number only when ordering complete Standard Sets.
— — — — 8 8
3/16 — — 3/16 10 10
Tap Extractor Parts — — — — 12 12
1/4 1/4 — 1/4 1/4 1/4
5/16 5/16 5/16 5/16 5/16 5/16
Holder
3/8 3/8 3/8 3/8 3/8 3/8
Fingers 7/16 7/16 7/16 7/16 7/16 7/16
1/2 1/2 1/2 1/2 1/2 1/2
Collar — 5/8 9/16 5/8 5/8 5/8
Sleeve
— — 5/8 3/4 3/4 3/4
Tap extractors also available: — — — 7/8 — 7/8
To fit Pipe Taps 1/8” through 1” in 4-flute and 5-flute styles;
— — — 1 — 1
and STI to fit taps for Helical Coil Wire Screw Thread Inserts,
sizes #4 through 5/8” in 4-flute, 3-flute and 2-flute styles. *3-flute style
535-05
WALTON COMPANY
TAP EXTENSIONS
STYLE “B”—For Both Machine and Hand Tapping Operations
Set #9
?? ?
Having trouble finding THE PRODUCTS
536-05
537-05
No.
5312H 3⁄8" 3-1⁄4" .30
5314H 7⁄16" 3-1⁄4" .30
5316H 1⁄2" 3-1⁄4" .31
No. Finish No.
5318H 9⁄16" 3-1⁄4" .31
5249Q+ 7" .6 Chrome 5260 3" .15
5320H 5⁄8" 3-1⁄4" .31
5249 7" .6 Chrome 5260-06 6" .29
5322H 11⁄16" 3-1⁄4" .33
5249H++ 7" .6 Chrome 5261 8" .39
5324H 3⁄4" 3-1⁄4" .40
+ Quick Release ++ Rubber Grip 5262 12" .61
5326H 1-3⁄16" 3-1⁄4" .43
5263 17-3⁄16" .90
5328H 7⁄8" 3-1⁄4" .54
5330H 15⁄16" 3-1⁄4" .65
STANDARD LENGTH ROUND HEAD RATCHET 5332H 1" 3-1⁄4" .71
UNIVERSAL JOINT 5334H 1-1⁄16" 3-1⁄4" .72
5336H 1-1⁄8" 3-1⁄4" .74
No. 5340H 1-1⁄4" 3-1⁄4" 1.02
5270 1-15/16" .10 5348H 1-1⁄2" 3-1⁄2" 1.58
No.
5252A 7-1⁄2" .66 DEEP LENGTH SOCKETS—12 POINT
HINGE HANDLE
No.
5316 1⁄2" 3-1⁄4" .29
5318 9⁄16" 3-1⁄4" .29
ADAPTERS No. Finish 5320 5⁄8" 3-1⁄4" .32
5265H++ 8-1/2" .54 Chrome 5322 11⁄16" 3-1⁄4" .32
++ Rubber Grip 5324 3⁄4" 3-1⁄4" .36
5326 13⁄16" 3-1⁄4" .41
SLIDING TEE HANDLE
5328 7⁄8" 3-1⁄4" .53
5330 15⁄16" 3-1⁄4" .55
5332 1" 3-1⁄4" .67
No. Sizes
5334 1-1⁄16" 3-1⁄4" .68
5253 3/8"F x 1/2"M 1-5/32" .08
5336 1-1⁄8" 3-1⁄4" .70
5254 1/2"F x 3/8"M 1-13/32" .12
No. 5340 1-1⁄4" 3-1⁄4" .96
5255 3/8"F x 1/4"M 1" .06
5256 1/4"F x 3/8"M 15/16" .03 5285 8" .31
538-05
STANDARD LENGTH PEAR HEAD RATCHET ROUND FLEX HEAD RATCHET STANDARD LENGTH ROUND HEAD RATCHET
• 180° flex
No. Finish
No. Finish 5452A 10" 1.26 Chrome
No.
5449Q+ 10" 1.3 Chrome 5452ABL 10-1/8" 1.26 Black
5457 13" 1.70
5449 10" 1.3 Chrome
5449H++ 10" 1.3 Chrome
UNIVERSAL JOINT
+ Quick Release ++ Rubber Grip
METRIC DEEP LENGTH SOCKETS—6 POINT STANDARD LENGTH SOCKETS—12 POINT No.
5470 2-5⁄8" .27
No. No.
5310HM 10 76.2 .30 5408 1/4" 1-7/16" .09
5311HM 11 76.2 .24 5410 5/16" 1-7/16" .10
5312HM 12 76.2 .28 5412 3⁄8" 1-1/2" .11
5313HM 13 76.2 .29 5414 7⁄16" 1-1/2" .12 HINGE HANDLE
5314HM 14 76.2 .29 5416 1⁄2" 1-1/2" .12
5315HM 15 76.2 .27 5417 17/32" 1-1/2" .13
5316HM 16 76.2 .24 5418 9⁄16" 1-1⁄2" .13
5317HM 17 76.2 .30 5419 19⁄32" 1-1⁄2" .17
5420 5⁄8" 1-1⁄2" .17 No.
5318HM 18 76.2 .38
5422 11⁄16" 1-1⁄2" .18 5466 10-7⁄8" 1.14
5319HM 19 76.2 .36
5424 3⁄4" 1-1⁄2" .21 5467 15-3⁄4" 1.52
5320HM 20 79.3 .37
5321HM 21 79.3 .38 5425 25⁄32" 1-1⁄2" .23 5468 18-5⁄8" 1.72
5322HM 22 79.3 .40 5426 13⁄16" 1-1⁄2" .23
5323HM 23 79.3 .42 5428 7⁄8" 1-1/2" .29 SPEED HANDLE
5324HM 24 79.3 .43 5429 29⁄32" 1-1/2" .28
5325HM 25 79.3 .45 5430 15⁄16" 1-1/2" .31
5326HM 26 79.3 .47 5431 31⁄32" 1-9⁄16" .34
5327HM 27 79.3 .50 5432 1" 1-9⁄16" .36
5434 1-1⁄16" 1-5⁄8" .42
5436 1-1⁄8" 1-3⁄4" .47
METRIC STANDARD LENGTH SOCKETS—12 POINT
5438 1-3⁄16" 1-3⁄4" .60
5440 1-1⁄4" 1-3/4" .55 No.
No. 5480 18" 1.6
5408M 8 38.1 .09
5409M 9 38.1 ,10
5410M 10 38.1 .11 SLIDING TEE HANDLE
5411M 11 38.1 .12 STANDARD LENGTH SOCKETS—6 POINT
5412M 12 38.1 .13
5413M 13 38.1 .15 No.
5414M 14 38.1 .14 5408H 1/4" 1-1/2" .10 No.
5415M 15 38.1 .17 5410H 5/16" 1-1/2" .11
5416M 16 38.1 .15 5485 12-15⁄16" 1.48
5412H 3⁄8" 1-1/2" .12
5417M 17 38.1 .19 5414H 7⁄16" 1-1/2" .12
5418M 18 38.1 .21 5416H 1⁄2" 1-1/2" .13
STANDARD EXTENSION
5419M 19 38.1 .20 5418H 9⁄16" 1-1⁄2" .13
5420M 20 38.1 .23 5419H 19/32" 1-1/2" .15
5421M 21 38.1 .22 5420H 5⁄8" 1-1⁄2" .17
5422M 22 38.1 .30 5422H 11⁄16" 1-1⁄2" .18 No. Finish
5423M 23 38.1 .28 5424H 3⁄4" 1-1⁄2" .19 5460 2-1⁄2" .23 Chrome
5424M 24 38.1 .27 5425H 25/32" 1-1/2" .19
5425M 25 39.6 .20 5461 5" .45 Chrome
5426H 13⁄16" 1-1⁄2" .23
5426M 26 39.6 .36 5463 10" .90 Chrome
5428H 7⁄8" 1-1/2" .30
5427M 27 41.2 .43 5430H 15⁄16" 1-1/2" .28
5428M 28 44.4 .49 5432H 1" 1-9⁄16" .36 ADAPTERS
5429M 29 44.4 .45 5434H 1-1⁄16" 1-5/8" .44
5430M 30 44.4 .53 5436H 1-1⁄8" 1-3⁄4" .54 No.
5431M 31 44.4 .54 5438H 1-3⁄16" 1-3⁄4" .59 5253 3⁄8" F x 1⁄2" M 7/32" .08
5432M 32 44.4 .55 5440H 1-1⁄4" 1-3/4" .59 5254 1⁄2" F x 3⁄8" M 1-3⁄8" .12
5434M 34 53.9 .57 5448H 1-1⁄2" 2-1⁄8" .78 5653 1/2" F x 3/8" M 1-21/32" .24
5436M 36 55.5 .61 5453 3/4" F x 1/2" M 2-1/8" .39
539-05
No. No.
5685 18" 2.98 5660 4" .86
ADAPTERS
5661 8" 1.34
ELL HANDLE
No. 5663 16" 2.38
5653 1⁄2" F x 3⁄4" M 1-19⁄32" .24
HINGE HANDLE
5453 3⁄4" F x 1⁄2" M 21⁄8" .39
5853 3⁄4" F x 1" M 21⁄2" .90
5854 1" F x 3⁄4" M 27⁄8" 1.29 No.
5686 16" 3.93
1/2" TORX® TIP SOCKETS 24-PIECE SOCKET SETS – 12 Point No. Finish
No. 5500C 5668 20" 4.30 Chrome
5668H++ 20" 4.30 Chrome
++ Rubber Grip
540-05
541-05
No.
7653 3/4"F x 1/2"M 2-3/16" .35
7655 3⁄4"F x 1"M 1-53⁄64" .87
No.
7565 5" 1.60
7567 7" 2.06
7568 10" 2.71
7569 13" 3.35
542-05
ARROWORTHY
PAINT BRUSHES
BHK Frame No. PHR Frame Only
Marine Flat Varnish 4 Wire Polypropylene Available in 4", 7", & 9" Sizes
White China Bristle Trim End Caps, 1/4" Steel,
Available in 1", 1-1/2", 2", Bucket Grip.
2-1/2", 3" & 4" Available in 3", 4", 7" & 9" Sizes
Order #9030 Wool Lintless
Polyester Blend Non-Shedding Fabric
45° Sash Brush Black China Small Diameter Roller Covers
Attach to any threaded pole. Chinese Bristle Lintless Non Shedding Fabric - for all paints
Available in Available in 1", 1-1/2", 2", Available in 4" and 6-1/2" Sizes,
Nylon/Polyester 2-1/2", 3" & 4" Nap Height 1/4", 3/8", 1/2", & 3/4"
& Bristle 2-1/2" & 3" Order #1610 Wool Polyester Blend - for all paints
Order #1075 for China Available in 4" and 6-1/2" Sizes,
Order #4075 for Nylon/Polyester Nap Height 3/8", 1/2"
Closed Core Covers
Woven - for all paints
Available in 4”, 7”, 9”, 12”, 14” & 18” Sizes
Available in 4" and 6-1/2" Sizes,
Nap Heights 3/8”, 1/2”, 3/4” & 1-1/4”
Nap Height 3/8"
Available in genuine lambskin,
Mohair - for high gloss semi gloss paints
1000 Chips White high or medium density
Available in 6-1/2" Size, Nap Height 3/16"
Chinese Bristle polyester, and nylon/acrylic/
Available in 1/2", 1", 1-1/2", polyester blend. Can be
2", 2-1/2", 3" & 4" purchased separately or as an
Order #1500 assembled unit with frame.
543-05
?? ?
Having trouble finding THE PRODUCTS
544-05
DRILL GAGE
No. 187:
Cat. No. Number Leaves Range Concave and Convex
Range 1/16 to 1/2” – HARDENED
178A 30 1/32 to 1/4” by 64ths
178B 32 17/64 to 1/2” by 64ths The size of a twist drill from 1/16 to 1/2” by 64ths can be
1 to 7 mm; 1 to 3 mm by 0.25 mm;
determined. The gage has a total of 29 holes, each marked with
178MA 34 the drill size in inches and the decimal equivalent. Gage is
3 to 7 mm by 0.5 mm
178MB 32 7.5 to 15 mm by 0.5 mm hardened and has a black matte finish. Approx. 5/64” thick by
2-5/16” wide by 6-1/4” long.
No. 797B Electronic Calipers No. 120 Series Dial Calipers
(with output)
545-05
English Graduation
Spring-tempered steel with satin chrome finish. fi Second Edge: 12ths – 24ths – 48ths
Cat. No. Description fi Fourth Edge: 14ths – 28ths
C391 American Unified National Standard, 60° REVERSE SIDE
C396 Whitworth or English Standard, 55° fi Third Edge: 16ths – 32nds – 64ths
C398M Metric Standard, 60° NO. 4R GRADUATION
fi First Edge: 64ths
FRONT SIDE
THICKNESS GAGES fi Second Edge: 32nds
fi Fourth Edge: 8ths
English or Metric REVERSE SIDE
fi Third Edge: 16ths
Cat. Width Thickness
No. 66
Length No. Graduation (approx.) (approx.) Type
6” C601-6 No. 1—10ths, 20ths, 50ths, 100ths; 3/4” 3/64” Satin Chrome—
12ths, 24ths, 48ths; 16ths, 32nds, Spring
64ths; 14ths, 28ths Tempered
12” C601-12 No. 1—10ths, 20ths, 50ths, 100ths; 1” 3/64” Satin Chrome—
12ths, 24ths, 48ths; 16ths, 32nds, Spring
No. 172AT
64ths; 14ths, 28ths Tempered
Leaves made of tempered steel. Leaves removed or replaced. Satin Chrome—
36” C604R-36 No. 4R—8ths, 16ths, 32nds, and 64ths 1/4” 3/64”
Includes Locking Device. Spring Tempered
NO. 30 GRADUATION
Size Number Range
FRONT SIDE
Metric Graduation
fi Second Edge: 1/2 mm
Cat. No. Leaves Leaves Leaf Thicknesses
THICKNESS GAGES WITH STRAIGHT LEAVES (inches)
172A 1/2 x 3-1/32 9 .0015, .002, .003, .004, .006, .008, .010, .012, .015 fi Fourth Edge: 1/2 mm
66 1/2 x 3-1/32 26 .0015, .002, .0025, .003, .004, .005, .006, .007, REVERSE SIDE
.008, .009, .010, .011, .012, .013, .014, .015, .016, fi Third Edge: mm
.017, .018, .019, .020, .021, .022, .023, .024, .025
THICKNESS GAGES WITH TAPERED LEAVES (inches)
NO. 35 GRADUATION
fi First Edge: mm
172AT 1/2 to 1/4 x 3-1/32 9 .0015, .002, .003, .004, .006, .008, .010, .012, .015 FRONT SIDE
66T 1/2 to 1/4 x 3-1/32 26 .0015, .002, .0025, .003, .004, .005, .006, .007, fi Second Edge: 1/2 mm
.008, .009, .010, .011, .012, .013, .014, .015, .016,
.017, .018, .019, .020, .021, .022, .023, .024, .025
fi Fourth Edge: mm
REVERSE SIDE
fi Third Edge: 1/2 mm
METRIC THICKNESS GAGES WITH STRAIGHT LEAVES ( mm)
66MA 12.7 x 77 20 .05, .10, .15, .20, .25, .30, .35, .40, .45, .50, .55, .60,
.65, .70, .75, .80, .85, .90, .95, 1.0 Cat. Width Thickness
METRIC THICKNESS GAGES WITH TAPERED LEAVES ( mm) Length No. Graduation (approx.) (approx.) Type
172MBT 12.7 to 7 x 144 9 .04, .05, .06, .07, .08, .10, .15, .20, .30 150 mm C330-150 No. 30—1/2 mm one side; 12.7 mm 0.4 mm Flexible
mm and 1/2 mm on reverse
300 mm C330-300 No. 30—1/2 mm one side; 12.7 mm 0.4 mm Flexible
mm and 1/2 mm on reverse
STEEL WIRE GAGE – HARDENED 1000 mm
(1 meter)
C635-1000 No. 35— mm and 1/2 mm
both sides
31.8 mm 1.2 mm Spring Tempered
?? ?
Having trouble finding THE PRODUCTS
546-05
547-05
?? ?
Having trouble finding THE PRODUCTS
548-05
Adjustable Parallels
Used as parallels for checking, marking, or positioning work. Also used for
measuring inside dimensions of recesses or slots, or for setting tools. Each parallel
consists of two tapered parts, dovetailed together. 6 Pc. Set Range: 3/8" to 2-1/4"
599-291-500 26986
Ultra Precision
12 Pc. Angle Block Set Ultra Precision 1-2-3 Blocks
Features: FEATURES
• Precision ground hardened steel. • Ease Hardened (HRC 55-60)
• Angular accuracy .0001" per inch, ± 30 arc sec. • Squareness on all sides to .0001".
• 3" long x 1/4" thick. • Complete in “shop-hardened”
• Simple, quick angle set-ups. molded case.
• Eliminate calculations & avoid errors.
• Complete set of 12 blocks: 1/4°, 1/2°, Set consists of a pair of 1x2x3 inch
1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30°. blocks, 5) 3/8-16 stainless steel
• All complete with a protective socket head cap screws & hex key.
“shop-hardened” molded case.
Tool EDP Tool EDP
No. No. No. No.
1/32" Ultra Thin Parallel Set - 10 Pair Set 1/8" Parallel Set - 10 Pair Set
Features: *Height specifications Features: *Height specifications
relate to consistency
• Parallel to ± .0001" within each pair; • Parallelism ± .0002" relate to consistency
• Paired ±.0001 in height* absolute height is
• Paired in height ± .00015"
within each pair;
absolute height is
nominal.
• Hardened to 50 HRC • Hardness 58-63 HRC nominal.
• Includes shop hardened protective molded case
• Size: 6" long by 1/32" wide Set includes 10 pairs with 1/8" widths of:
Set includes 10 pairs with 1/32" widths: 1/2", 5/8", 1/2", 5/8", 3/4", 7/8", 1",1-1/8", 1-1/4", 1-3/8",
3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-5/8". 1-1/2", 1-5/8".
Tool EDP Tool EDP
No. No. No. No.
?? ?
Having trouble finding THE PRODUCTS
549-05
CALIPERS
®
Dial-Cal Dial Calipers • Series MV45
T-Bar Base Attachment
(Fits All B&S Dial-Cals)
599-579-4 599-579-5
• Stainless Steel Construction • 1.25" Diameter Rotating Dial with Lock • Adjustable Zero Set
• Anti-backlash, Shockproof Design • Measure Four Ways: Inside, Outside, Depth, and Step
Range Jaw Length Tool EDP
Description Grad. per Rev. Face External No. No.
0-6" Dial-Cal® .001 .100 White 1.5" 599-579-4 51774
Makes depth measurement of
large (up to 3" diameter) holes
0-6" Dial-Cal® .001 .100 Jet Con. Black 1.5" 599-579-5 51879
easy and accurate. 0-8" Dial-Cal® .001 .100 White 2.5" 599-579-8 86567
0-8" Dial-Cal® .001 .100 Jet Con. Black 2.5" 599-579-8-5 87177
Tool No. EDP No. 0-12" Dial-Cal® .001 .100 White 2.5" 599-579-12* 86566
599-579-25 44300
0-12" Dial-Cal® .001 .100 Jet Con. Black 2.5" 599-579-12-5* 87178
150mm Dial-Cal® .02mm 2mm Yellow 40mm 599-579-14 51775
Wood Case 599-578-9999 44297
*This model Dial-Cal does not feature anti-backlash mechanism.
550-05
BesTest Indicators
Features: • Easy to read, satin black,“Jet-Console” • Constant clockwise rotation.
face with high visibility orange hand. • Anti-magnetic & corrosion resistant.
• Universal Mounting • Automatic reversal.
Smallest Dial Point Tool EDP
Division Marking Dia. Range Length No. No.
.001" 0-15-0 1" .030" 1/2" 599-7029-5 51732
.0005" 0-15-0 1" .030" 1/2" 599-7030-5 51733
.0005" 0-15-0 1-1/2" .030" 1/2" 599-7031-5 51734
.0001" 0-4-0 1" .008" 1/2" 599-7032-5 51737
.00005" 0-4-0 1-1/2" .008" 1/2" 599-7033-5 51738
.0005" 0-10-0 1" .020" 1-7/16" 599-7034-5 51735
.0005" 0-10-0 1-1/2" .020" 1-7/16" 599-7035-5 51736
?? ?
Having trouble finding THE PRODUCTS
551-05
CLAMPING TOOLS
BAR CLAMPS These one-handed clamps feature a quick-release trigger. The pistol-grip handle adjusts and tightens with just one hand.
UPC MFG # JAW MASTER PACK SHELF PACK
m3 kg
ITEM 0 38548 OPENING QUANTITY ft3 lb QUANTITY
506 00506 5 6"/150 mm 5 0.017 4.037 1
0.585 8 lb 14 oz
512 00512 6 12"/300 mm 5 0.021 4.944 1
0.739 10 lb 14 oz
518 00518 8 18"/455 mm 5 0.027 5.67 1
0.938 12 lb 8 oz
524 00524 9 24"/605 mm 2 0.011 2.767 1
0.405 6 lb 1.6 oz
536 00536 2 36"/910 mm 2 0.015 3.311 1
0.541 7 lb 4.8 oz
550 05500 8 50"/1300 mm – 0.016 2.262 1
0.562 5 lb
MINI BAR CLAMPS
546 00546 1 6"/150 mm 5 0.008 1.953 1
0.294 4 lb 4.9 oz
5412 05412 4 12"/300 mm 5 0.012 2.435 1
0.436 5 lb 5.9 oz
MACRO BAR CLAMPS
53016 53016 1 10"/250 mm 2 0.009 2.665 1
0.330 5 lb 14 oz
53026 53026 0 20"/500 mm 2 0.014 3.26 1
0.490 5 lb 14 oz
53046 53046 8 33-1/2"/837 mm 2 0.020 4.224 1
0.715 9 lb 5 oz
WELDING CLAMPS
5906 05906 8 6"/150 mm 10 0.029 11.48 2
1.029 25 lb 5 oz
5918 05918 1 18"/455 mm 10 0.052 14.54 2
1.852 32 lb 1 oz
SPRING CLAMPS
58100 58100 2 1"/25 mm 50 0.050 5.463 10
1.766 12 lb 0.7 oz
58200 58200 9 2"/50 mm 50 0.050 7.448 10
1.766 16 lb 6.7 oz
58300 58300 6 3"/75 mm 25 0.050 6.314 5
1.766 13 lb 15 oz
PIPE CLAMP/SPREADER Works with threaded or unthreaded 3/4"/19 mm black pipe. Use as a clamp or a spreader.
590L3 00590 4 * 5 0.022 5.2 1
1.410 11 lb 8 oz
5902L3 59021 9 * 5 0.470 9.98 1
1.253 22 lb
HANDY CLAMP
570L3 57000 6 * 10 0.026 5.6 5
0.935 5 lb 12 oz
*Depends on the length of pipe used.
?? ?
Having trouble finding THE PRODUCTS
552-05
CAMPBELL® CHAIN
M1R M1RS1
M5R (Bulldog)
Cat. Length Blade
No. Grip color Cuts in (mm) in (mm) Capacity
M5R Red Notching 91⁄4 (233) 7⁄ 8 (22) 16 gauge *
M6R (Offset)
M300
Cat. Length Blade
No. Grip color Cuts in (mm) in (mm) Capacity
Cat. Length Blade
M6R Red L 91⁄4 (233) 1 1⁄4 (32) 18 gauge* No. Grip color Cuts in (mm) in (mm) Capacity
M7R Green R 91⁄4 (233) 1 1⁄4 (32) 18 gauge* M300 Orange S 101⁄2 (267) 3 (76) 20 gauge *
553-05
CAMPBELL® CHAIN
LOCKING TOOLS
These locking pliers are made to meet stringent ASME standards B107.24 and B107.36, as applicable, for product specifications,
including strength and maximum jaw opening capacity. Long nose, curved, and straight jaw pliers feature a patented angled tooth
pattern for a better grip, and every style has a nickel-plated finish for maximum resistance to rust and corrosion.
Integral wire cutter on curved Nickel-plated finish resists
jaw and long nose styles rust and corrosion
Locking C-Clamps
allow quick, easy
positioning of
workpieces. Swivel tips
minimize marring on
Maximum jaw softer materials
opening capacity
per ASME specs
Locking Welding
Clamp holds
workpieces firmly in
Precisely machined ferrule position. Open design
Patented angled tooth pattern for fine jaw adjustment allows clear access
provides better grip for welding.
C11CCV C11CCSV
C20CH
554-05
Ergonomic Screwdrivers
Slotted Screwdrivers
Ball Point Screwdrivers
for Hexagon Socket Head Screws
BE-8010 - BE-8040
BE-8150 - BE-8155
BE-8220 - BE-8240
BE-8703 - BE-8708 BE-8710 BE-8250 - BE-8255 BE-8160 - BE-8890
Package Tool Shaft Length Ctn.
Package Tip Tool Shaft Length Ctn.
Code Length x Tip Diam. Qty.
Code No. Length x Tip Diam. Qty.
BE-8010 6" 2" x 3/32" 10
BE-8703 3mm 8-1/4" 4-1/4" x 3mm 10
BE-8020 6" 2" x 1/8" 10
BE-8704 4mm 9" 4-1/4" x 4mm 10
BE-8030 7-3/4" 3" x 9/64" 10
BE-8705 5mm 9" 4-1/4" x 5mm 10
BE-8040 8-3/4" 4" x 5/32" 10
BE-8706 6mm 10-1/4" 5-1/2" x 6mm 10
BE-8150 8-3/4" 4" x 7/32" 10
BE-8708 8mm 10-1/2" 5-3/4" x 8mm 10
BE-8155 9-3/4" 5" x 1/4" 10
BE-8710* 10mm 14" 7-1/2" x 10mm 5
BE-8160* 9-3/4" 5" x 5/16" 10
BE-8220 9" 5" x 1/8" 10
BE-8230 9-3/4" 5" x 9/64" 10
BE-8240 11-3/4" 7" x 5/32" 10
Torx Screwdrivers BE-8250 10-3/4" 6" x 7/32" 10
BE-8255 10-3/4" 6" x 1/4" 10
BE-8260* 11-3/4" 7" x 5/16" 10
BE-8865* 13-1/2" 7" x 5/16" 5
BE-8940 BE-8906 - BE-8930 BE-8870* 13-1/2" 7" x 3/8" 5
BE-8880* 14-1/2" 8" x 1/2" 5
Package Tip Tool Shaft Length Ctn.
BE-8890* 14-1/2" 8" x 9/16" 5
Code No. Length x Tip Diam. Qty.
BE-8906 TX 6 6" 2" x 1.7mm 10
BE-8907 TX 7 6-1/4" 2-1/8" x 1.99mm 10
BE-8908 TX 8 6-1/2" 2-3/8" x 2.31mm 10 Pozidriv/Supadriv Screwdrivers
BE-8909 TX 9 7-1/4" 2-3/8" x 2.5mm 10
BE-8910 TX 10 7-1/4" 2-1/2" x 2.74mm 10
BE-8915 TX 15 7-1/2" 2-3/4" x 3.27mm 10
BE-8920 TX 20 7-1/2" 3" x 3.86mm 10
BE-8925 TX 25 8" 3-1/8" x 4.43mm 10
BE-8840 BE-8800 - BE-8820
BE-8927 TX 27 8-1/4" 3-1/2" x 4.99mm 10
BE-8930 TX 30 8-3/4" 4" x 5.52mm 10 Package Tip Tool Shaft Length Ctn.
Code No. Length x Tip Diam. Qty.
BE-8940* TX 40 11-1/2" 5-1/8" x 6.65mm 5
BE-8800 PZD/SDV 0 6-1/2" 2-1/3" x 1/8" 10
BE-8810 PZD/SDV 1 7-3/4" 3" x 3/16" 10
BE-8820 PZD/SDV 2 8-3/4" 4" x 1/4" 10
BE-8830* PZD/SDV 3 10-3/4" 6" x 5/16" 5
Phillips Head Screwdrivers BE-8840* PZD/SDV 4 14-1/2" 8" x 3/8" 5
Sets
Pkg. Code Ctn.
BE-8600 - BE-8620 BE-8640
Set No. Contents Qty.
Package Tip Tool Shaft Length Ctn. BE-8020, BE-8040, BE-8150, BE-8155 SLOT
BE-9881 10
Code No. Length x Tip Diam. Qty. BE-8610, BE-8620 PHILLIPS
BE-8600 PH 0 6-1/2" 2-1/3" x 1/8" 10 BE-8908, BE-8909, BE-8910, BE-8915,
BE-9885 10
BE-8610 PH 1 7-3/4" 3" x 3/16" 10 BE-8920, BE-8925 TORX
BE-8620 PH 2 8-3/4" 4" x -1/4" 10 BE-8030, BE-8150 SLOTTED
BE-8630* PH 3 10-3/4" 6" x 5/16" 5 BE-9886 BE-8810, BE-8820 PZD/SDV 10
BE-8640* PH 4 14-1/2" 8" x 3/8" 5 BE-8610, BE-8620 PHILLIPS
555-05
No. of
Type Ordering A B B C D E Adjust- Wt. Carton
Slip Joint Pliers: No. No. mm mm in. mm mm mm ment grams Qty.
• Rapid set jaws Positions
• Quick release with touch of a button 8224 8224 250 45 1.77 40 53 7.5 9 350 5
• Hardened steel teeth keep their grip 8225 8225 315 55 2.16 52 67 9 12 560 3
140-147 Series
Black oxidized and anti-rust treated high-alloyed special steel
with precision induction-hardened jaws. Sheet outer handle.
Inner handle with safety stop for regulation nut.
# per box A B C D Weight
Product EAN/Bar Code
Code 731415 + mm mm in. mm mm g
140 0008797 3 215 30 1.20 13 15 400
141 0008827 3 280 36 1.40 16 18 700
142 0008841 3 370 52 2.05 20 20 1300
143 0008872 1 555 78 3.10 29 26 2700
144 0008902 1 720 110 4.35 32 33 5380
147 0008933 1 1060 160 6.30 38 35 7210
556-05
No. 509
No. K-156 ARCH PUNCH Size Size Size
Inches Inches Inches
Each kit contains threaded handle with self- (ga.) (ga.) (ga.)
centering pointed plunger. This handle will 8 4 1⁄2 12 3 1⁄4 15 2 1⁄2
accommodate the interchangeable threaded 9 4 13 3 16 2 3⁄8
cutting tubes. The punches in these sets will 10 3 3⁄4 14 2 3⁄4 17 2 1⁄4
cleanly cut leather, rubber, paper, plastics and
other soft materials. 11 3 1⁄2
No. 149
No. K-156 — 9 Tubes 1⁄4", 5⁄16", 3⁄8", 7⁄16", 1⁄2", 5⁄8", 3⁄4", 7⁄8", 1" Diameter Diameter Diameter Diameter Diameter
No. K-159 — 4 Tubes 11⁄8", 11⁄4", 13⁄8", 11⁄2" (inches) (inches) (inches) (inches) (inches)
3
⁄16 1 113⁄16 2 5⁄8 3 7⁄16
1
⁄4 11⁄16 17⁄8 2 11⁄16 3 1⁄2 ARCH PUNCH SETS
ARCH PUNCH AND TOOL SET 5
⁄16 1 ⁄8
1
1 ⁄16
15
2 ⁄4
3
3 9⁄16
3
⁄8 1 ⁄16
3
2 2 ⁄16
13
3 5⁄8
7
⁄16 11⁄4 2 1⁄16 2 7⁄8 3 11⁄16
1
⁄2 15⁄16 2 1⁄8 2 15⁄16 3 3⁄4
9
⁄16 1 ⁄8
3
2 ⁄16
3
3 3 13⁄16
5
⁄8 1 ⁄16
7
2 ⁄4
1
3 ⁄16
1
3 7⁄8
11
⁄16 11⁄2 2 5⁄16 3 1⁄8 3 15⁄16
3
⁄4 19⁄16 2 3⁄8 3 3⁄16 4 No. K-14
13
⁄16 1 ⁄8
5
2 ⁄16
7
3 1⁄4 1 each of following sizes No. 149 - Arch Punch:
7
⁄8 111⁄16 2 1⁄2 3 5⁄16 Sizes
(inches)
1
⁄ 4 3⁄ 8 1⁄ 2 5⁄ 8 3⁄ 4 7⁄ 8 1
15
⁄16 13⁄4 2 9⁄16 3 3⁄8
557-05
No. 500
Drop forged, tempered and polished edge. No. 216 — Plain Rim
Inside tapered for easy clearance. Use with Sets plain rim washers and grommets. Sizes 00
No. G1 corresponding grommets and setting dies. through 5 drop forged, size 6 malleable casting.
For best results in setting our grommets and Made to U.S. Government Specifications. Drop
Hole Hole Wt. each Hole Hole Wt. each forged, properly machined and hardened. Must
washers, use our No. 500 grommet hole cutter size (oz) cutter size (oz)
cutter punch and our No. 216 setting die with be used with our grommets and washers.
00 3
⁄16 2 4 1
⁄2 6
corresponding sizes. Size Weight each Size Weight each
0 1
⁄4 2 5 5
⁄8 9
Size Diameter of hole Weight per gross No. (lbs) (oz) No. (lbs) (oz)
1 9
⁄32 3 6 3
⁄4 9
No. when set (inches) (lbs) (oz) 00 1 6 3 1 9
2 3
⁄8 3 7 7
⁄8 12
00 3
⁄ 16 — 2 0 1 6 4 2 8
3 7
⁄16 6 8 1 13
0 1
⁄4 — 5 1 1 7 5 2 10
1 9
⁄ 32 — 8 2 1 7 6 3 15
2 3
⁄8 — 12 Note: Grommet setting die for spur grommets
3 7
⁄ 16 1 2 GROMMET KIT ( No. 217) also available.
4 1
⁄2 1 8
5 5
⁄8 1 12
6 13
⁄ 16 6 —
Note: Nickel-plated brass plain rim grommets RAWHIDE HAMMER
and washers also available. with split head
Rolled-rim grommets and spur washers
also available in brass or nickel plated.
Specify if either is desired.
No. 197
No. 201G-B No. 155 Rubber mallets can be used without fear of
A quality scraper with brass riveted hardwood Frame is made of forged steel, highly polished. marring metal parts. Limited bounce. Head of
handles. Made from high carbon steel, then Cutting tubes are hand turned from carbon tool solid dense black rubber with white hickory
forged, hardened and tempered, edged and steel and threaded to allow easy replacement. handle.
sharpened. These tubes are individually tempered. Size Length Diameter Weight each
No. (inches) (inches) (oz)
Product Blade Length of blade Width of blade Size 1 2 3 4 5 6
No. type (inches) (inches) 2 3 1⁄4 2 1⁄8 13
Diameter
201G-B Bent 4 11⁄4 ⁄32
3 7
⁄64 ⁄8
1
⁄32
5
⁄64
11 3
⁄16 3 4 1⁄2 3 30
size
558-05
No. MT10
Length Diameter Length Diameter
(inches) (inches) (inches) (inches) No. 1204
6 3
⁄16 14 1
⁄4
These hooks are strongly made of toughest
8 3
⁄16 18 5
⁄16 materials. Two spiral steel shafts, one inside
No. 33P
10 1
⁄4 20 5
⁄16 the other, wound in opposite directions, make
12 1
⁄4 Product Length Packing of the shank. Handle is solid zinc. Hook is
No. Description (inches) (inches) tempered and permanently pointed.
MT33-S Rigid Packing Tool 9 1
⁄8
MT33-M Rigid Packing Tool 10 3
⁄16 Size Length Diameter of Diameter of Length of spiral
No. (inches) shaft (inches) spiral (inches) (inches)
MT33-L Rigid Packing Tool 10 5
⁄16
DOUBLE-END PACKING TOOLS 0 7 3
⁄32 11
⁄64 5
⁄16
Light “O” Ring
MT27 6 1
⁄8 1 61⁄4 3
⁄16 1
⁄4 3
⁄4
Packing Pick
2 10 5⁄8 1
⁄4 5
⁄16 11⁄8
No. MT12 3 15 3
⁄8 3
⁄8 11⁄2
3-22 22 3
⁄8 3
⁄8 11⁄2
Length Diameter Length Diameter RIGID PACKING TOOL SET
(inches) (inches) (inches) (inches) 3-30 30 3
⁄8 3
⁄8 11⁄2
4 18 3
⁄8 1
⁄2 17⁄8
6 1
⁄4 10 1
⁄4
5 22 3
⁄8 5
⁄8 17⁄8
8 1
⁄4 12 5
⁄16
No. 908P
No. 106
Product Description
DRAG HOOK No. The nuts on the wings are steel. Washers are
MT10-6 6" Rigid Packing Screw of turned brass. The points are carefully hard-
ened and every care is taken with the thread
MT32-8 8" Packing Hook
of the screws which hold the legs in position
No. 671 MT10-10 10" Rigid Packing Screw on the wings. The springs are carefully
Flattened tang on top of hook for finger MT12-12 Double-End Packing Tool tempered and are made for easy adjustment
comfort. Hook anchored for direct pull. MT10-14 14" Rigid Packing Screw while holdthe legs firmly. Made to U.S.
MT42-14 Packing Iron Government Specifications.
Overall length Diameter stock Handle
(inches) (inches) (inches) MT10-18 18" Rigid Packing Screw
24 3
⁄8 5×1 MT10-20 20" Rigid Packing Screw Size (inches) 6 8 10 12
559-05
No. 276
Made of high-grade carbon steel carefully No. 242
forged, hardened and tempered. Fully polished.
No. 273 Made of high-grade tool steel properly
Length hardened and highly polished. This is an
Cast malleable iron. Polished blade. 6 8 10 12 14 16 18 20 24
(inches) excellent tool for scraping small surfaces
Size Length Width Thickness Weight each where a large tool cannot be used.
No. (inches) (inches) (inches) (oz)
00 5 2 1
⁄32 4
COLD CHISELS
0 5 5⁄8 2 1⁄2 1
⁄16 41⁄2 THREE-SQUARE
1 5 7⁄8 2 1⁄4 1
⁄8 5 3⁄4 BEARING SCRAPER
No. 325
SPECIAL CURVED
BEARING SCRAPER SET A hammer-forged tool. Forged of alloy steel. No. 34B, 34C, 34D, 34E
Blades are induction hardened and carefully Made of high-grade tool steel. Blade is hollow
tempered, then polished. Black industrial finish. ground and carefully polished.
Width of cut Hex stock size Length Product Length Weight UPC
(inches) (inches) (inches) Description
No. (inches) ea. oz. No.
1
⁄4 1
⁄4 5 34B-12 3 Sq. Scraper 12 6 59172
5
⁄16 5
⁄16 5 34C-10 3 Sq. Scraper 10 6 59173
No. 1140 3
⁄8 3
⁄8 5
Absolutely non-chattering. Manufactured from 34D-8 3 Sq. Scraper 8 5 59174
7
⁄16 3
⁄8 51⁄2 34E-6 3 Sq. Scraper 6 4 59070
the highest grade tool steel. Each scraper is
deeply grooved, hollow-ground and carefully
1
⁄2 3
⁄8 6
tempered. Hardwood handle. Polished blade. 5
⁄8 1
⁄2 6
3
⁄4 5
⁄8 7
Product Cutting edge Blade length
No. (inches) (inches) 7
⁄8 3
⁄4 8 SCRATCH AWLS
1411 3 10 1⁄2 1 7
⁄8 8
1412 3 ⁄2
1
11 11⁄8 7
⁄8 81⁄2
1413 4 12 1⁄8
Also available (separate from set)
1409-2 2 9 3⁄4 POURING LADLES
560-05
561-05
562-05
HYDE TOOLS
Stainless Steel Blade Tools (Industrial) Solid Brass Blade Tools (Industrial) Soft Grip Hammer End Brass Blade
420-series cutlery grade stainless steel Non-spark brass blades are non-magnetic. Tools (Professional) The ergo-engineered
blades. For use in the most harsh and Full tang blade construction. Nylon soft-grip handles fit your fist for less user
abrasive environments. Full tang blade handles. U.S. Pat. 4,524,514 fatigue… cushioned to absorb shock and
construction. Nylon handles. U.S. Pat. 4,524,514 *02070 High Carbon Steel Bent Putty Knife perform comfortably during extended use.
U.S. Pat. 5,956,799
1¹₄" / 32 mm Stiff 1.6 lb/10 pk
01740 Stainless Steel Joint Knife 06975 Soft Grip Brass Non-Spark 6-IN-1
5" / 127 mm Flex 1.2 lb/5 pk Painter’s Tool
02975 Brass Non-Spark 5-IN-1 Painter’s Tool Hammer end, Stiff 1.4 lb/5 pk
01840 Stainless Steel Joint Knife
Stiff 2.0 lb/10 pk
6" / 152 mm Flex 1.4 lb/5 pk
02550 High Carbon Steel Joint Knife
4" / 102 mm Flex 1.0 lb/5 pk
High Carbon Steel Blade Tools
(Professional) Full tang blade construction. 02750 High Carbon Steel Joint Knife Soft Grip High Carbon Steel Blade
Nylon handles. U.S. Pat. 4,524,514 Tools (Professional) The ergo-engineered
5" / 127 mm Flex 1.3 lb/5 pk
soft-grip handles fit your fist for less user
fatigue… cushioned to absorb shock and
02850 High Carbon Steel Joint Knife perform comfortably during extended use.
6" / 152 mm Flex 1.4 lb/5 pk U.S. Pat. 5,956,799
02000 High Carbon Steel Putty Knife 02990 High Carbon Steel Joint Knife
1¹₄" / 32 mm Flex 0.7 lb/5 pk 8" / 203 mm Flex 2.3 lb/5 pk
02005 High Carbon Steel Putty Knife 02880 High Carbon Steel Joint Knife
01850 Stainless Steel Joint Knife ³₄" / 19 mm Flex 0.7 lb/5 pk 10" / 254 mm Flex 2.3 lb/5 pk
Hammer end 6" / 152 mm Flex 1.5 lb/5 pk
06100 Soft Grip Putty Knife
02050 High Carbon Steel Putty Knife
1¹₂" / 38 mm Flex 1.2 lb/5 pk
1¹₄" / 32 mm Stiff 0.8 lb/5 pk
06150 Soft Grip Putty Knife
02100 High Carbon Steel Putty Knife
1¹₂" / 38 mm Stiff 1.3 lb/5 pk
1¹₂" / 38 mm Flex 0.7 lb/5 pk
563-05
HYDE TOOLS
Hammer end X.H.D. Stiff 1.8 lb/5 pk held or with all Acme thread broom
*Black semi-gloss electrocoated finish baked on at 400° F handles and
extension poles.
10530 1¹₂" 4-Edge Scraper Polypropylene handle.
Professional 1¹₂" / 38 mm Blade 1.5 lb/5 pk
06770 Soft Grip Joint Knife 11120 1¹₂" 4-Edge Scraper Blade
Hammer end 5" / 127 mm Flex 1.9 lb/5 pk
1¹₂" / 38 mm For 10530 0.6 lb/10 pk *12072 Extra Heavy Duty Flat Chisel
06870 Soft Grip Joint Knife Extension Pole Scraper
11125 1¹₂" 4-Edge Scraper Blades (2)
Hammer end 6" / 152 mm Flex 1.9 lb/5 pk Professional 3" / 76 mm Stiff X.H.D. 2.1 lb/5 pk
1¹₂" / 38 mm (2) For 10530 1.0 lb/10 pk
*Black semi-gloss electrocoated finish baked on at 400° F
06880 Soft Grip Joint Knife
11130 2¹₂" 4-Edge Scraper Blade
Hammer end 8" / 203 mm Flex 2.3 lb/5 pk
2¹₂" / 64mm For 10275, 10280, 10540 1.0 lb/10 pk
06885 Soft Grip Joint Knife 10400 Molding Scraper Two high carbon
11135 2¹₂" 4-Edge Scraper Blades (2) steel blades; Triangle with 2³₄" scraping
Hammer end 10" / 254 mm Flex 2.7 lb/5 pk edges, teardrop 2" x 1". Scrape flat surfaces,
2¹₂" / 64mm (2) For 10275, 10280, 10540 1.7 lb/10 pk cracks and contours. 9³₄" Tubular metal
handle. Foam hand grip.
Paint Scrapers (Professional) Solid Heavy Duty Carbide Scrapers Tungsten 2 Blades 2.5 lb/5 pk
polypropylene handles shaped to fit the carbide blades last 10 times longer than
human hand. Well balanced for carbon steel. Cast metal shafts. Soft-grip
comfortable grip and control. Handles handles.
angled to provide extra leverage. Handle *12075 Extra Heavy Duty Bent Chisel
shape keeps knuckles safely away from Extension Pole Scraper
work surface. Blade /surface angle Professional 6" / 152 mm Stiff X.H.D. 3.4 lb/5 pk
designed for maximum paint scraping
efficiency. U.S. Pat. No. 291,404 *Black semi-gloss electrocoated finish baked on at 400° F
HYDE
564-05
HYDE TOOLS
MADSEN & HOWELL INC. – PERTH AMBOY, NEW JERSEY (732) 826-4000
500 Market Street, P.O. Box 391, Perth Amboy, NJ 08862
NOLAND SUPPLY – NEWPORT NEWS, VIRGINIA (757) 874-8000
Visit the Online Hyde® Catalog 12515 Jefferson Avenue, Newport News, VA 23602
www.hydetools.com • custrelations@hydetools.com PORTER-WALKER, INC. – COLUMBIA, TENNESSEE (931) 388-1861
54 Eastford Road, Southbridge, MA 01550-1875 15-16 Public Square, P.O. Box 519, Columbia, TN 38401
800-USA-HYDE (872-4933) FAX 508-765-5250 (continued next page…)
0564-0567-04 5/5/05 7:18 AM Page 4
565-05
HYDE TOOLS
Power Driven Mixers (Professional) 09910
Use with electric drill. Mix cement/mortar,
drywall compound, driveway sealer, grout
material, paint, paste, adhesive, waterproofing
coating, etc. High performance polypropylene
impeller blades produce superior mixing
Heavy Duty Glass Scrapers action. Lift and mix heavy solids from
The shape fits the fist for better bottom of containers. Easy-clean non-stick
grip and precise control. Large ribbed control blades will not damage buckets. Heavy duty Wall and Ceiling Repair Patch Repair any
button for safer operation. Built-in sash guide mixing; wet or dry. drywall, plaster, stucco or painted wood
(¹₁₆" ) maintains paint/glass seal. Remove surface. Easily cut for custom fit. Cover
coatings, paint and stickers from glass, holes, cracks or imperfections in flat, curved
mirrors, or windshields. U.S. Pat. No. 346,319 09114 or uneven surfaces. Works for smooth and
13000 Heavy Duty Glass Scraper textured repairs. Sets in minutes. Strong
09114 Power Driven Mixer Double impeller. adhesion prevents delamination and shifting.
1 Blade 1.5 lb/10 pk 5" Dia., ³⁄₈" x 24" Shaft 4.8 lb/4 pk Ready to paint the same day. Cut to fit, wet
and apply to surface, allow to set… then top
13010 Heavy Duty Glass Scraper coat… less than 30 minutes start to finish.
(Scraper only) 2.5 lb/20 pk Power Driven Paint Mixers Use with most
viscous fluids; paint, coatings wall texture 09910 Repair Patch Self-merchandising
13050 Heavy Duty Glass Scraper and adhesives. For use in variable speed counter display shelf pack.
5 Blades 2.0 lb/10 pk drill 500-1500 rpm. Super high performance Carded 5" x 15" Sheet 2.8 lb/30 pk
multi-vane impeller design. Auger teeth
loosen settled solids. Plated hexagonal 09911 Repair Patch Self-merchandising
drive shafts resist corrosion. counter display shelf pack.
Carded 5" x 3 yd. Roll 5.0 lb/12 pk
1 GALLON 43440
46435
5 GALLON 43450
566-05
l
b c
Awl
b
d l d l Wt. Brush, Flat Back, Scratch
Number
mm mm g inch inch lbs. Block Size a x b Rows Trim Length c Wgt. Ea.
8230 4 185 45 5/32 7-1/4 .10 Number (inches) (inches) (inches) (lbs.)
(mm) (mm) (grams)
2.250 x 7.250 6 x 19 1-3/4 .75
B-401
57.150 x 184.150 6 x 19 44.450 340
a
Barrel Hook, Adjustable a
I b c
b max L max b max L max Wt.
Number
mm kg g Inch lbs. lbs. Axe, Fireman’s (with fiberglass handle only) Brush, Shoe Handle, Scratch
B-10 1060 700 4545 42 1500 10.02 a b l a b l Wt. Block Size a x b Rows Trim Length c Wgt. Ea.
Number
mm mm mm g inch inch inch lbs. Number (inches) (inches) (inches) (lbs.)
(mm) (mm) (grams)
KITS AS-1-STFG 127 305 889 2700 5 12 35 5.95
B-399 1.063 x 10.000 4 x 16 1-1/8 .45
27.000 x 254.000 4 x 16 28.575 205
M-47 KITS a
a
Pieces
S-48 Std Screwdriver-
b c
5/16" Tip, 3" Blade
I
P-30 6-1/2" Combination Pliers
W-71 8" Adjustable End Wrench Bar, Crow Brush, Curved Handle, Scratch
CJ-1-ST 9" Crate Opener Block Size a x b Rows Trim Length c Wgt. Ea.
a l a l Wt.
Number Number (inches) (inches) (inches) (lbs.)
S-1099 #2 Phillips Screwdriver mm mm g inch inch lbs.
(mm) (mm) (grams)
P-39 #10 Groove Joint Pliers P-11 28 1525 8500 1-1/4 60 18.76
B-400 1.125 x 13.750 4 x 19 1-1/8 .55
P-12 32 1730 11000 1-3/8 68 24.48
28.575 x 349.250 4 x 19 28.575 250
M-51
HAZMAT KITS s
Pieces l
B-399 Shoe Handle
Brush
Bar, Pinch a
Ampco Safety Tools offers the most complete line of non-sparking, non-magnetic and
corrosion-resistant hand tools worldwide. Over 2200 tools are available in both inch
and metric sizes. Special tools and sizes can be produced to customer specifications.
Tel: 972-276-6181 • Fax: 972-276-5815 • Toll Free: 800-580-9835
E-Mail: sales@AmpcoSafetyTools.com • Web: www.AmpcoSafetyTools.com
0569-04 5/3/05 10:22 AM Page 597
567-05
a a
l
l
WB-44C
152.4
6.0
25.400
1.0
0.356
.014
plain
1
4,500
4,500
725
1.60
Retaining Collar D-4 13 27 200 600 9/16 1-1/16 8 1.32
D-5 18 30 200 880 11/16 1-3/16 8 1.95
152.4 25.400 0.356 plain 4,500 725 a b c l a b c l Wt.
WB-44D 6.0 1.0 .014 11/4 4,500 1.60 Number mm mm mm mm g inch inch inch inch lbs.
D-6 22 33 200 1050 13/16 1-5/16 8 2.32
152.4 25.400 0.356 plain 4,500 725 CR-20-ST 40 22 19 195 400 1-1/2 7/8 3/4 7-3/4 .90
WB-45 4.0 .750 .014 1/2 6,000 .80
CR-21-ST 45 23 22 203 500 1-3/4 15/16 7/8 8 1.10
101.6 19.050 0.356 plain 6,000 365
WB-45A 4.0 .750 .014 3/8 6,000 .80 CR-22-ST 65 25 22 220 600 2-1/2 1 7/8 8-5/8 1.32
101.6 19.050 0.356 plain 6,000 365 a
WB-45B 4.0 .750 .014 5/8 6,000 .80
l d
101.6 19.050 0.356 plain 6,000 365 s
Drift Pin, Straight Type
.680 round
b a d l a d l Wt.
shank Number
17, 3 mm ø mm mm mm g inch inch inch lbs.
a
l1 l2 D-20 6 13 150 100 1/4 1/2 6 .22
D-21 7 17 150 100 9/32 11/16 6 .22
b c Chisel, Pneumatic Scaling D-22 8 21 205 175 5/16 13/16 8 .38
s b l1 l2 s b l1 l2 Wt. D-23 12 24 255 645 7/16 15/16 10 1.42
Number
Broom, Round Wire, Push mm mm mm mm g inch Inch inch Inch lbs.
D-24 13 29 255 865 1/2 1-1/8 10 1.90
CP-20-ST 19 38 124 76 290 3/4 1-1/2 4-3/4 3 .90
Block Size a x b Rows Trim Length c Wgt. Ea.
Number (inches) (inches) (inches) (lbs.) CP-21-ST 22 44 127 76 520 7/8 1-3/4 5 3 1.10
(mm) (mm) (grams) CP-22-ST 22 64 154 76 610 7/8 2-1/2 6 3 1.32
PB-10 2.500 x 12.000 6 x 26 2-1/2 2.20
63.500 x 304.800 6 x 26 63.500 997 c
b s
s
a
l
a
Chisel, Pneumatic Scaling b
l
l
s b l s b l Wt.
Number
Chisel, Diamond Point mm mm mm g inch inch inch lbs.
Dust Pan
a s l a s l Wt. CS-22-ST 13 32 90 60 1/2 1-1/4 3-1/2 .24
Number Number a b c l a b c l Wt.
mm mm mm g inch inch inch lbs.
CS-23-ST 13 16 125 60 1/2 5/8 5 .28 mm mm mm mm g inch inch inch inch lbs.
C-6 13 20 205 435 1/2 3/4 8 .96
CS-24-ST 13 50 125 140 1/2 2 5 .36 D-49 100 200 40 330 515 4 8 1-1/2 13 1.14
C-7 19 23 310 915 3/4 7/8 12 2.02 D-50 230 190 40 305 780 9 7-1/2 1-1/2 12 1.72
CS-25-ST 13 50 200 290 1/2 2 7-3/4 .72
568-05
l a b
Hammer, Engineers’ l
l1
l2
a
l
a
Hammer, Sledge*
H l H l Wt. b
Number l
g mm g lbs. inch lbs. l
H-69FG 1400 380 1600 3.00 15 3.30
H-70FG 2200 780 2500 5.00 31 6.30 Knife, Linoleum Pliers, Adustable Combination
H-71FG 3400 780 3700 7.50 31 8.62 a max l a max l Wt.
a b l a b l Wt. Number
H-72FG 4535 780 4800 10.00 31 10.28 Number mm mm g inch inch lbs.
H-73FG 6800 890 7200 15.00 35 15.94 mm mm mm g inch inch inch lbs. P-30 8 165 190 5/16 6-1/2 .42
H-74FG 8165 890 8700 18.00 35 19.18 K-40 64 116 191 80 2-1/2 4-9/16 7-1/2 .18 P-31 13 205 235 1/2 8 .52
Ampco Safety Tools are recommended by safety engineers and insurance companies
and have the approval of Factory Mutual Research Corporation and OSHA. Ampco
tools are available in aluminum bronze and other special copper alloys.
Tel: 972-276-6181 • Fax: 972-276-5815 • Toll Free: 800-580-9835
E-Mail: sales@AmpcoSafetyTools.com • Web: www.AmpcoSafetyTools.com
0571-04 5/3/05 10:23 AM Page 599
569-05
l b
l
Pliers, Long Nose with Cutter b
Saw Blade, Hack l
l l Wt.
Number
mm g inch lbs. Number
b
mm
l
mm g
b
inch
l
inch
Wt.
lbs.
Scraper, Hand Style
P-326 180 160 6-1/2 .34 a b l a b l Wt.
8356 14 300 30 9/16 11-3/4 .07 Number
mm mm mm g inch inch inch lbs.
S-1069 95 95 480 640 3-3/4 3-3/4 18-3/4 1.42
l l a
l
Scraper, Deck Scraper, Ship
Pliers, Pipe Number
a l a l Wt.
Number
a b l a b l Wt.
l l Wt. mm mm g inch inch lbs. mm mm mm g inch inch inch lbs.
Number
mm g inch lbs. S-10ag 22 200 210 7/8 7-7/8 .44 S-27 100 70 406 610 4 2-3/4 16 1.34
P-33 205 370 8 .78 S-10g 50 300 570 2 12 1.24 S-27s blade only 200 blade only .42
570-05
a
Non-Sparking Tools
b a
l
d
b
Screwdriver (Standard Type) l
a b l a b l Wt. Spatula
Number l
mm mm mm g inch inch inch lbs.
a b l a b l Wt.
S-48 8 80 170 65 5/16 3 6-1/2 .14 Number
mm mm mm g inch inch inch lbs.
Wrench, Adjustable Pipe,
S-49 11 150 260 136 5/16 6 10-1/8 .30
S-50 10 200 330 225 25/64 8 13 .50 S-90 25 150 260 50 1 6 10-1/4 .12 Bronze
S-54 10 300 430 290 25/64 12 9-1/2 .64 S-91 40 230 350 135 1-1/2 9 14 .30
d max l d max l Wt.
S-54 3 150 241 55 1/8 6 9-1/2 .12 S-92 50 355 490 230 2 14 19-1/4 .50 Number
mm mm g inch inch lbs.
W-210 19 205 600 3/4 8 1.32
a
W-211 25 255 990 1 10 2.10
l b W-212 38 355 1600 1-1/2 14 3.24
W-213 50 460 2200 2 18 4.72
b Wedge, Flange W-214 65 610 4050 2-1/2 24 8.72
l
Number a b l a b l Wt. W-215 90 915 7350 3-1/2 36 16.18
Screwdriver (Phillips Type) W-1
mm
6
mm
15
mm
80
g
50
inch
1/4
inch inch lbs.
1/2 3 .04
W-216 130 1219 13800 5 48 30.38
b l b l Wt. W-2 13 19 102 100 1/2 3/4 4 .18
Number
Type mm mm g inch inch lbs. W-3 13 25 150 200 1/2 1 6 .42
S-1099a 1 75 155 55 3 6-1/2 .12 W-4 19 38 150 400 3/4 1-1/2 6 .92
S-1099 2 105 190 73 4 7-1/2 .16 W-5 13 32 180 300 1/2 1-1/4 7 .64
S-1100 3 155 260 136 6 10-1/8 .30 W-6 19 50 180 700 3/4 2 7 1.56
S-1101 4 200 330 225 8 13 .50 W-7 41 38 200 1300 1-5/8 1-1/2 8 2.50
W-8 25 38 200 800 1 1-1/2 8 1.72
W-9 19 50 200 700 3/4 2 8 1.66
W-10 32 50 215 1400 1-1/4 2 8-1/2 2.96
W-11 10 50 180 400 3/8 2 7 .74
W-12 10 50 90 200 3/8 2 3-1/2 .40
l
a
Wrench, Bung
l s l l Wt.
Number
mm g inch lbs.
Snips, Tin W-56 305 680 12 1.50
a l a l Wt.
Number
mm mm g inch inch lbs.
S-1126a 50 210 175 2 8 .38 l
l
a
Ampco Safety Tools are non-sparking, non-magnetic and corrosion-resistant hand tools.
Over 2200 styles and sizes, in both inch and metric, are available. Ampco Safety Tools
are recommended by Factory Mutual Research Corporation and OSHA.
Tel: 972-276-6181 • Fax: 972-276-5815 • Toll Free: 800-580-9835
E-Mail: sales@AmpcoSafetyTools.com • Web: www.AmpcoSafetyTools.com
0573-04 5/3/05 10:25 AM Page 601
571-05
l l
s l l
Wrench, Combination Wrench, Double End Box, Wrench, Double Open End
Wrench, Allen Millimeter (mm) Offset Type, 12-Point
Millimeter (mm)
Millimeter (mm) Number s l Millimeter (mm)
mm mm g Number s1 x s2 l
Number s a l Number s1 x s2 l mm mm g
mm mm mm g 1300 8 135 45 mm mm g 0450 6 x 7 95 25
1302 9 150 50 1000 6 x 7 155 40 0452 6 x 8 100 30
WH-2MM 2 19 45 2 1304 10 160 50 1002 7 x 9 155 40 0454 7 x 8 100 30
WH-3MM 3 20 65 5 1306 11 175 75 1004 8 x 9 155 40 0456 7 x 9 110 35
WH-4MM 4 25 72 11 1308 12 190 95 1006 8 x 10 170 77 0458 8 x 9 110 35
WH-5MM 5 28 80 19 1310 13 205 115 1008 9 x 11 170 77 0460 8 x 10 115 40
1312 14 205 115 1010 10 x 11 170 77 0462 9 x 10 115 40
WH-6MM 6 32 90 30 0464 9 x 11 125 50
1314 15 225 145 1012 10 x 12 180 105
WH-8MM 8 36 100 60 1014 11 x 12 180 105 0466 10 x 12 135 65
WH-10MM 10 40 112 105 1316 16 225 145 1016 12 x 13 180 105 0468 10 x 14 145 85
1318 17 245 170 1018 10 x 14 200 130 0470 11 x 13 145 85
WH-12MM 12 45 125 170
1320 18 245 170 1020 11 x 14 200 130 0472 11 x 14 145 85
WH-14MM 14 55 140 260 1322 19 270 260 1022 12 x 14 200 130 0474 12 x 14 145 85
WH-17MM 17 60 160 444 1324 20 270 260 1024 13 x 15 220 180 0476 13 x 15 155 105
WH-19MM 19 70 175 618 1326 21 295 300 1026 14 x 15 220 180 0478 14 x 16 155 105
1028 14 x 17 230 200 0480 14 x 17 170 130
WH-22MM 22 80 200 950 1328 22 295 300 0482 16 x 18 170 130
1030 16 x 17 260 255
WH-24MM 24 90 224 1260 1330 23 325 400 1032 16 x 18 260 255 0484 17 x 19 185 165
WH-27MM 27 110 250 1780 1332 24 325 400 1034 17 x 19 280 300 0486 18 x 20 185 165
WH-30MM 30 112 280 2460 1334 25 355 550 1036 18 x 19 280 300 0488 17 x 22 200 240
1336 26 355 550 1038 17 x 22 330 420 0490 19 x 22 200 240
WH-32MM 32 125 315 3140 1040 19 x 22 330 420 0492 20 x 22 200 240
1338 27 355 550
WH-36MM 36 140 355 4470 1340 28 390 690 1042 19 x 24 330 420 0494 19 x 24 220 300
American Inch (") 1044 20 x 22 330 420 0496 21 x 23 220 300
1342 30 390 690 0498 22 x 24 220 300
1046 21 x 23 330 420
Number s a l Wt. 1344 32 430 1000 1048 22 x 24 360 560 0500 22 x 27 240 390
inch inch inch lbs. 1346 34 430 1000 1050 24 x 26 360 560 0502 23 x 26 240 390
WH-1/16 1/16 3/4 1-3/4 .01 1348 36 475 1100 1052 22 x 27 400 660 0504 24 x 27 240 390
1350 38 475 1100 1054 24 x 27 400 660 0506 25 x 28 260 485
WH-5/64 5/64 3/4 1-3/4 .02 0508 24 x 30 260 485
1352 41 525 1450 1056 25 x 28 400 660
WH-3/32 3/32 3/4 1-7/8 .02 1058 24 x 30 410 820 0510 27 x 30 260 485
1354 46 575 1900
WH-1/8 1/8 13/16 2-5/16 .02 1060 27 x 30 410 820 0512 27 x 32 285 650
1357 50 575 2200 0514 30 x 32 285 650
WH-5/32 5/32 7/8 2-1/2 .02 1062 27 x 32 410 820
1358 55 575 2600 1064 30 x 32 430 820 0516 30 x 36 310 850
WH-3/16 3/16 7/8 2-7/8 .04 1360 60 575 3150 1066 30 x 36 480 1350 0518 32 x 36 310 850
WH-7/32 7/32 11/16 3-1/8 .06 1362 65 575 4580 1068 32 x 36 480 1350 0520 36 x 41 340 1150
WH-1/4 1/4 11/16 3-7/8 .08 1364 70 575 4580 1070 36 x 41 510 1750 0522 41 x 46 375 1500
1072 41 x 46 580 2550 0524 46 x 50 415 1900
WH-5/16 5/16 1-3/8 4-1/8 .14 American Inch (") 0526 50 x 55 455 2500
1074 46 x 50 630 3300
WH-3/8 3/8 1-1/2 4-1/2 .24 s l Wt. 1076 50 x 55 690 4250 0528 50 x 60 505 3200
WH-7/16 7/16 1-3/4 5-1/4 .36 Number inch inch lbs. 1078 50 x 60 740 4250 0530 55 x 60 505 3200
WH-1/2 1/2 1-3/4 5-1/4 .46 W-601 3/8 7-1/4 0.16 1080 55 x 60 740 5300 0532 65 x 70 555 4600
W-611 7/16 7-1/4 0.16 1082 65 x 70 760 7600 American Inch (")
WH-9/16 9/16 1-3/4 5-3/4 .62 1084 70 x 75 780 9400
WH-5/8 5/8 1-7/8 6-1/4 .86 W-621 1/2 7-1/4 0.14 s1 x s2 l Wt.
W-631 9/16 8-1/4 0.26 American Inch (") Number inch inch lbs.
WH-11/16 11/16 2-1/4 7-1/4 1.20
W-641 5/8 8-1/4 0.24 s1 x s2 l Wt. W-697 1/4 x 5/16 5-1/4 0.16
WH-3/4 3/4 2-1/4 7-1/4 1.42 Number inch inch lbs. W-698 3/8 x 7/16 5-1/4 0.16
W-651 11/16 10-1/8 0.46
WH-7/8 7/8 2-1/4 7-1/4 1.98 W-3109 5/16 x 3/8 7-3/4 0.12 W-699 7/16 x 1/2 5-1/4 0.14
W-661 3/4 10-1/8 0.46 W-700 1/2 x 5/8 6 0.32
WH-1 1 2-1/4 7-1/4 2.60 W-3110 3/8 x 7/16 7-3/4 0.22
W-671 7/8 13-1/4 0.94 W-702 1/2 x 11/16 6 0.32
W-3120 7/16 x 1/2 7-3/4 0.22
W-671b 15/16 13-1/4 0.91 W-704 9/16 x 5/8 6 0.34
W-3130 1/2 x 9/16 9-1/2 0.26 W-706 9/16 x 3/4 6-3/4 0.58
W-671a 1 13-1/4 0.90
1/2" Socket Sets W-672 1-1/16 17 1.22
W-3140 1/2 x 19/32 9-1/2 0.44 W-710 5/8 x 3/4 6-3/4 0.54
W-3150 9/16 x 5/8 9-1/2 0.40 W-712 11/16 x 25/32 6-3/4 0.54
W-260M (mm) W-673 1-1/8 17 1.26 W-3160 5/8 x 3/4 10-3/4 0.46 W-718 11/16 x 7/8 6-3/4 0.52
Sockets (mm) W-674 1-1/4 19-1/2 2.08 W-3170 11/16 x 25/32 10-3/4 0.66 W-720 3/4 x 13/16 9-1/4 0.84
W-675 15/16 19-1/2 2.46 W-3180 3/4 x 7/8 12-1/4 0.74 W-722 3/4 x 7/8 9-1/4 0.84
10, 11, 12, 13, 14, 15, 16, 17, 18, 19,
W-676 1-3/8 21-1/4 2.84 W-3190 13/16 x 7/8 12-1/4 0.72 W-724 25/32 x 7/8 9-1/4 0.86
20, 21, 22, 23, 24, 25, 26, 27, 28, 29 W-732 7/8 x 15/16 9-1/4 1.08
W-677 1-7/16 21-1/4 2.78 W-3210 7/8 x 1 14-3/4 1.20
(g) 7275 W-678 1-1/2 22 3.38 W-736 7/8 x 1 9-1/4 1.08
W-3220 7/8 x 1-1/16 15-1/8 1.48 W-738 7/8 x 1-1/16 10-3/4 1.36
W-260 (in.) W-679 1-5/8 22 3.30 W-3221 15/16 x 1 14-3/4 1.24 W-740 15/16 x 1-1/16 10-3/4 1.34
1504 11-1/16 22-3/4 4.19 W-3230 15/16 x 1-1/16 15-1/8 1.42 W-741 1 x 1-1/8 10-3/4 1.34
Sockets (in.)
1506 1-3/4 22-3/4 4.19 W-3240 1 x 1-1/8 15-1/8 1.36 W-748 1-1/16 x 1-1/4 13-3/8 2.64
5/16, 3/8, 7/16, 1/2, 9/16, 19/32, 5/8, 1508 2 22-3/4 4.85 W-750 1-1/8 x 1-5/16 13-3/8 2.64
W-3241 1-1/16 x 1-1/8 15-1/8 1.32
11/16, 3/4, 25/32, 13/16, 7/8, 15/16, 1510 2-3/16 22-3/4 5.73 W-3250 1-1/16 x 1-1/4 19-1/4 2.42 W-754 1-1/8 x 1-1/2 15-1/4 3.74
1, 1-1/16, 1-1/8, 1-1/4 1512 2-3/8 22-3/4 6.94 W-756 1-1/4 x 1-7/16 15-1/4 3.76
W-3260 1-1/8 x 1-5/16 19-1/4 2.34 W-760 1-1/4 x 1-5/8 15-1/4 3.94
(lbs.) 11.02 1514 2-9/16 22-3/4 10.08 W-3261 1-1/4 x 1-5/16 19-1/4 2.28 W-764 1-7/16 x 1-5/8 16-3/4 4.26
Sets include ratchet, extension bar, sliding bar, 1516 2-3/4 22-3/4 10.08 W-3270 1-1/4 x 1-7/16 19-1/4 2.26 W-772 1-5/8 x 1-13/16 18-3/4 8.56
hinged handle wrench and carrying case. 1518 2-5/8 22-3/4 10.08 W-3271 1-7/16 x 1-5/8 19-1/4 2.66 W-778 1-13/16 x 2 183/4 8.34
572-05
6-Point
s d b
s
a1
l
l Number a1 a2 b d l Wt.
l (mm) 40 30 113 13 500 720 g
American Inch (") 7520
s l Wt. (in.) 1-9/16 1-3/16 4-7/16 1/2 19-3/4 1.59 lbs.
American Inch (") Millimeter (mm) Number inch inch lbs.
s l Wt. s l WS-1808 1-1/4 6-1/2 1.20
Number Number
inch inch lbs. mm mm g WS-1808A 1-5/16 7-1/2 1.52
WS-11/16 11/16 6-5/16 0.8 WS-17 17 160 365 WS-1809 1-7/16 7-1/2 1.44
WS-3/4 3/4 6-5/16 0.8 WS-19 19 160 365 WS-1809A 1-1/2 8-3/4 2.54
WS-7/8 7/8 6-5/16 0.8 WS-22 22 160 365 WS-1810 1-5/8 8-3/4 2.38 Wrench, Valve Wheel
WS-1 1 6-5/16 0.8 WS-24 24 160 365
WS-1810A 1-11/16 9-7/8 3.22
WS-1811 1-13/16 9-7/8 3.04
WS-1-1/16 1-1/16 7 0.78 WS-27 27 180 365 d
WS-1811A 1-7/8 10-5/8 3.42
WS-1-1/8 1-1/8 7 0.7 WS-28 28 180 310
WS-1812 2 10-5/8 3.32
W-1-3/16 1-3/16 7-7/8 1.3 WS-29 29 180 310
WS-1813 2-3/16 11-1/2 4.32
WS-1-1/4 1-1/4 7-7/8 1.3 WS-30 30 200 590 WS-1814 2-3/8 12-1/4 4.06 a
WS-1-5/16 1-5/16 7-7/8 1.3 WS-32 32 200 590 WS-1815 2-9/16 13-1/2 5.32
WS-1-3/8 1-3/8 7-7/8 1.2 WS-33 33 200 590 WS-1815A 2-5/8 13-1/2 5.30
WS-1-7/16 1-7/16 7-7/8 1.14 WS-34 34 200 590 WS-1816 2-3/4 17 7.60 l
WS-1-1/2 1-1/2 9 1.96 WS-35 35 200 545
WS-1-9/16 1-9/16 9 1.88 WS-36 36 200 545 Driver, Hex Nut
WS-1-5/8 1-5/8 9 1.88 WS-37 37 200 520
Number d a l Wt.
WS-1-11/16 1-11/16 9 1.8 WS-38 38 200 520
(mm) 36 60 370 650 g
WS-1-3/4 1-3/4 9 1.8 WS-41 41 230 860 a 7470
s
WS-1-13/16 1-13/16 9 1.75 WS-42 42 230 860 (in.) 1-3/8 1-1/2 14-1/2 1.43 lbs.
l
WS-1-7/8 1-7/8 10 3.1 WS-46 46 230 860 (mm) 48 80 430 1300 g
Millimeter (mm) 7472
WS-2 2 10 2.92 WS-47 47 230 820 (in.) 1-7/8 1-5/32 17 2.87 lbs.
WS-2-1/16 2-1/16 10 2.84 WS-50 50 255 1360 Number s a l (mm) 62 102 550 2550 g
mm mm mm g 7474
WS-2-1/8 2-1/8 10 2.82 WS-52 52 255 1290 (in.) 1-7/16 4-1/64 21-3/4 5.62 lbs.
WS-2-3/16 2-3/16 10 2.68 WS-54 54 255 1270 8040 3,5 85 175 55
8042 4 85 180 55
WS-2-1/4 2-1/4 11-1/4 4.6 WS-55 55 255 1225
8044 4,5 85 180 60
WS-2-5/16
WS-2-3/8
2-5/16
2-3/8
11-1/4
11-1/4
4.4
4.4
WS-56
WS-58
56
58
255
285
1215
2040
8046 5 85 185 60 Valve Wheel Hook
8048 5,5 90 190 65
WS-2-7/16 2-7/16 11-1/4 4.3 WS-60 60 285 1995 8050 6 90 190 65 d
WS-2-1/2 2-1/2 11-1/4 4.2 WS-63 63 285 1905 8052 6,5 90 190 80 b
WS-2-9/16 2-9/16 11-1/4 4.2 WS-65 65 285 1860 8054 7 100 200 80
a
WS-2-5/8 2-5/8 13 6.84 WS-67 67 330 3220 8056 7,5 100 200 100
8058 8 100 210 100 l
WS-2-3/4 2-3/4 13 6.8 WS-70 70 330 2950
8060 9 100 210 115
WS-2-13/16 2-13/16 13 6.78 WS-71 71 330 2965 Number a b d l Wt.
WS-2-15/16 2-15/16 13 6.32 WS-75 75 330 2875
8062 10 110 220 115
8064 11 110 220 130 (mm) 30 56 13 300 350 g
WS-3 3 14-3/16 9.21 WS-77 77 360 4130 7490
8066 12 110 230 170 (in.) 1-3/16 2-3/16 1/2 11-3/4 .77 lbs.
WS-3-1/8 3-1/8 14-3/16 9.06 WS-80 80 360 4130 8068 13 110 230 210 (mm) 35 61 13 350 600 g
WS-3-1/4 3-1/4 14-3/16 8.64 WS-82 82 360 3920 8070 14 120 240 210 7492
(in.) 1-3/8 2-3/8 1/2 13-3/4 1.32 lbs.
WS-3-3/8 3-3/8 15-1/2 14.6 WS-85 85 360 3795 8072 15 120 240 235
(mm) 40 72 16 400 680 g
WS-3-1/2 3-1/2 15-1/2 14.08 WS-88 88 395 6440 8074 16 130 250 235 7494
WS-3-5/8 3-5/8 15-1/2 13.7 WS-90 90 395 6350 8076 17 130 250 240 (in.) 1-5/8 2-3/8 5/8 15-3/4 1.50 lbs.
WS-3-3/4 3-3/4 15-1/2 13.1 WS-94 94 395 6080 (mm) 45 77 16 450 1110 g
American Inch (") 7496
WS-3-7/8 3-7/8 15-1/2 12.6 WS-95 95 395 5990 (in.) 1-3/4 3 5/8 17-3/4 2.44 lbs.
Number s a l Wt.
WS-4 4 17-1/8 25 WS-100 100 395 5670 inch inch inch lbs. (mm) 50 88 19 500 1200 g
7498
WS-4-1/8 4-1/8 17-1/8 25 WS-105 105 435 11335 8080 1/8 3-11/32 7 .12 (in.) 2 3-7/16 3-1/4 19-3/4 2.64 lbs.
WS-4-5/16 4-5/16 17-1/8 25 WS-110 110 435 11335 8082 5/32 3-11/32 7 .12 (mm) 60 104 22 600 2000 g
7502
WS-4-9/16 4-9/16 18-3/4 37.5 WS-115 115 435 11335 8084 3/16 3-11/32 7-1/4 .13 (in.) 2-3/8 4 7/8 23-5/8 4.41 lbs.
WS-4-11/16 4-11/16 18-3/4 37.5 WS-120 120 475 17000 8086 7/32 3-35/64 7-1/2 .14 (mm) 70 120 25 700 3000 g
7506
WS-4-15/16 4-15/16 18-3/4 51 WS-125 125 475 17000 8088 1/4 3-35/64 7-1/2 .18 (in.) 2-3/4 4-3/4 1 27-1/2 6.61 lbs.
WS-5-1/8 5-1/8 18-3/4 51 WS-130 130 505 23000 8090 5/16 3-15/16 8-1/4 .22 (mm) 80 136 28 800 5300 g
WS-5-3/8 5-3/8 22-5/8 66 WS-135 135 505 23000 8092 3/8 4-21/64 8-1/2 .25 7508
(in.) 3-1/8 5-3/8 1-1/8 31-1/2 11.67 lbs.
WS-5-11/16 5-11/16 22-5/8 66 WS-145 145 575 30000 8094 7/16 4-21/64 9 .37
WS-6 6 22-5/8 66 WS-150 150 575 30000 8096 1/2 4-21/64 9 .46
WS-155 155 575 30000 8098 9/16 4-23/32 9-1/2 .52
8100 5/8 5-1/8 9-3/4 .52
8102 11/16 5-1/8 9-3/4 .53
573-05
The products above and below this line are not available from the same manufacturing source.
?? ?
Having trouble finding THE PRODUCTS
574-05
AVAILABLE THROUGH:
WUENSCH SALES CO. (see page 1437)
NITTO KOHKI U.S. A., INC.
HOUSTON: 713-921-6419 • 800-607-9543 • Fax: 877-921-3194
E-Mail: sales@wuenschsales.com • Web: www.wuenschsales.com
0605-0607-03 5/3/05 10:31 AM Page 605
575-05
MULTI-PURPOSE PULLER SETS • The Universal Hydraulic Tool Box • Crack nuts the safe way
• Set comes with pump, hose, cylinder, gauge, adapter and • Power to push, pull, lift, press, straighten, spread and • Compact, ergonomic, lightweight design
case clamp with forces up to 12.5 tons • Includes spare chisel, spare set screw and wrench
• Grip puller, cross bearing puller, bearing cup and bearing • Sets include pump, hose, cylinder, and gauge • Available for hexagon nut size up to 2.88"
puller attachment also included • Numerous attachments permit quick configuration of
specialized tools Model Capacity Hexagon nut sizes Weight
Number (tons) (in) (lbs)
Model Capa- Max Spread Max Reach Weight NC-1319 5 .50-.75 1.8
Number city of Jaws of legs Set Model Capacity Number of Weight NC-1924 10 .75-.94 4.4
(tons) (in) (in) (lbs) Number (tons) attachments (lbs) NC-2432 15 .94-1.13 6.6
BHP-1752 8 9.84 14.00 82 MS2-4 2.5 34 59 NC-3241 20 1.13-1.56 9.7
BHP-2751G 20 19.68 22.50 198 MS2-10 5 35 140 NC-4150 35 1.56-2.00 18.0
BHP-3751G 30 31.50 28.00 380 MS2-20 12.5 13 210 NC-5060 50 2.00-2.25 26.0
BHP-5751G 50 43.30 34.00 657 MS2-1020 5-12.5 53 350 NC-6075 90 2.38-2.88 75.1
?? ?
Having trouble finding THE PRODUCTS
576-05
?? ?
Having trouble finding THE PRODUCTS
577-05
COMPOSITE HYDRAULIC HAND PUMPS HYDRAULIC HAND PUMPS PUMPS AIR HYDRAULIC PUMPS 10,000 PSI
• Lightweight design; impact and corrosion • Durable, rugged metal design • Coaxial piston design for high • High efficiency cast aluminum air motor
resistant • External load release valve performance; first-stage piston pump for for increased productivity
• Low handle effort • Internal adjustable pressure relief valve improved efficiency • Reinforced heavy-duty reservoir for
• For single-acting tools and cylinders • For single and double-acting cylinders • High by-pass pressures improve applications in tough environments
• Single-and two-speed operation and tools productivity • New generation air saver piston with
• Available in 2.5, 5.0 and 5.5 hp four-cycle rugged one-piece design reduces air
Model Maximum Displacement Usable Model Max. Displacement Usable motors, with 1-, 2-, 5-, and 10-gallon consumption and operating costs
Number Pressure per Stroke Oil Number Pressure per Stroke Oil reservoirs for use with a wide range of • Quiet – only 76 dBA with low air
(in3) Cap. (in3) Cap. cylinders consumption of 12 scfm
(psi) 1st 2nd (in3) (psi) 1st 2nd (in3) • Operating air pressure: 25-125 psi,
Model Hp Valve Usable
P-141 N/A .055 P-391) 10,000 N/A .16 40 enables pump to start at extremely low
10,000 20 Number type oil cap.
pressure
P-142 10,000 .221 .055 20 P-80 1)
10,000 .99 .15 134 (gal)
• Relief valve setting up to 10,000 psi
P-202 10,000 .221 .055 55 P-8011) 10,000 .99 .15 249 PGM-2404R 2.5 Manual 4/3 1.0
P-391 10,000 N/A .151 55 P-842) 10,000 .99 .15 134 PGM-2304R 2.5 Manual 3/3 1.0 Model For Useable Oil
P-392 .687 .151 P-4621) 10,000 7.69 .29 453 PGM-3420R 5.0 Manual 4/3 5.0 Number Cylinder Capacity
10,000 55
PGM-5440R Manual 4/3 10.0 Type (in3)
P-802 10,000 2.40 .151 155 P-4642) 10,000 7.69 .29 453 6.5
PATG-1102N* SA 127
1)
single acting
2)
double acting PAMG-1402N* DA 127
PARG-1102N** SA 127
* 305 in3 (5 liter) reservoir available:
TORQUE WRENCH HOSE AND COUPLER PATG-1105N, PAMG-1105N
** Remote pendant controlled
PUMPS (11,600 PSI) ASSEMBLIES
FLANGE SPREADERS FLANGE ALIGNMENT
?? ?
Having trouble finding THE PRODUCTS
578-05
579-05
COFFING HOISTS
MINI HOIST – 550 Lbs. Capacity
Features: Model TB-602
• Standard lift 5’
• Lifts up to 550 lbs
• Comes with convenient toolbox storage
• Plated load chain is standard
• Weston-type load brake
• Rubber hand grip for better comfort and security
• Lightweight design for ease of portability. Use in
confined conditions with one-hand operation
• Forged upper and lower hooks with latches standard
• Impact resistant, all-steel frame, gear case and cover
• Hardened link-type steel load chain for strength and long wear
• Free wheeling feature serves to quickly attach the load
• Metric rated
• Performs just like the larger hoists, but small enough to fit in a
hard hat
Chain Lift w/ Handle Net Weight
Number Dim. One Full Pull @ w/ Standard
Capacity Model Product of dxt Lever W.L.L. Lift
(Lbs.) Number Code Chainfalls (in.) Turn (in.) (Lbs.) (Lbs.)
550 Lbs. TB-602 0210 1 .16 x .47 3.15 56.2 6.0
SINGLE-SPEED TROLLEY SPECIFICATIONS LH Models – Specially designed for applications where headroom is
critical. All models include motorized trolleys.
Rated Trolley Trolley Trolley
Load Speed Motor Model
• Rated loads of 1/2 to 2 tons
(Lbs.) (fpm) (HP) Number
• 230/460 volt motor standard. 208 and 575 volt motors optional.
1000 35 1/4 MT-10035
115/230 (single phase) volt motors available on 1/2 and 1 HP units.
1000 75 1/4 MT-10075
2000 35 1/4 MT-20035 • All low headroom models are reeved part double for plumb lift.
2000 75 1/4 MT-20075 • Two-speed available. 3 to 1 ratio (three phase only).
4000 35 1/2 MT-40035 • Adjustable for 6” to 18” American Standard I-Beams with 5-foot
4000 75 1/2 MT-40075 minimum radius.
580-05
COFFING HOISTS
WR, WRT, and TVL Models – Wire Rope Hoists designed for industrial service, the WR incorporates mechanical
load brake, motor brake and overload clutch as standard. Other features are ergonomic-designed push button station,
solid state starting switch, panel plate with numbered connection wires and first stage helical gearing for quiet
operation. Available in single or double reeved models. TVL models available for true vertical lifts.
• Rated loads of 1/2 and 1 ton.
• Adjustable for 6” to 18” American Standard I-Beams with
recommended 4-foot minimum radius.
• 230/460 volt motors standard. 115/230 (single phase), 575
and 208 volt motors are optional.
• Two-speed available, 3 to 1 ratio (three phase only).
• Capacity limiter on all models. Prevents lifting of damaging
overloads while operating hoist.
• Dual brake system consists of mechanical load brake and
multiple disc, direct acting motor brake.
• Adjustable upper and lower limit switches regulate load travel.
• Machined drum with uniform, precise grooving provides
smoother drum winding and longer rope life.
• Fully machined, cast iron wheels equipped with sealed,
lifetime lubricated precision ball bearings for long life.
• True vertical lift models available – see chart below.
SPECIFICATIONS
Lift Headroom
Capacity Model Suspension Lift Motor Speed (In.) Dimensions Net Wt.
Lbs. Ton Number Reeving Type (Ft.) (HP) (fpm) Trolley Lug H W L (Lbs.)
1000 1/2 WRT-1016 2-part Single Single 15 1/2 16 21-13/16 20 8-3/16 12-1/8 31-9/16 203
1000 1/2 WRT-1016 2-part Single Dual 25 1/2 16 22-13/16 21 8-3/16 12-1/8 35-15/16 231
1000 1/2 WRT-1016 2-part Single Dual 35 1/2 16 22-13/16 21 8-3/16 12-1/8 40-5/16 253
1000 1/2 WRT-1032 2-part Single Single 15 1 32 21-13/16 20 8-3/16 12-1/8 31-9/16 221
1000 1/2 WRT-1032 2-part Single Dual 25 1 32 22-13/16 21 8-3/16 12-1/8 35-15/16 239
1000 1/2 WRT-1032 2-part Single Dual 35 1 32 22-13/16 21 8-3/16 12-1/8 40-5/16 254
2000 1 WRT-2016 2-part Single Single 15 1 16 21-13/16 20 8-3/16 12-1/8 31-9/16 211
2000 1 WRT-2016 2-part Single Dual 25 1 16 22-13/16 21 8-3/16 12-1/8 35-15/16 239
2000 1 WRT-2016 2-part Single Dual 35 1 16 22-13/16 21 8-3/16 12-1/8 40-5/16 254
1000 1/2 WRT-1016-TVL 2-part Double Dual 15 1/2 16 21-15/16 20-1/8 8-3/16 12-1/8 42-5/16 253
1000 1/2 WRT-1016-TVL 2-part Double Dual 30 1/2 16 21-15/16 20-1/8 8-3/16 12-1/8 55-1/4 281
1000 1/2 WRT-1032-TVL 2-part Double Dual 15 1 32 21-15/16 20-1/8 8-3/16 12-1/8 42-5/16 261
1000 1/2 WRT-1032-TVL 2-part Double Dual 30 1 32 21-15/16 20-1/8 8-3/16 12-1/8 55-1/4 289
2000 1 WRT-2016-TVL 2-part Double Dual 15 1 16 21-15/16 20-1/8 8-3/16 12-1/8 42-5/16 261
2000 1 WRT-2016-TVL 2-part Double Dual 30 1 16 21-15/16 20-1/8 8-3/16 12-1/8 55-1/4 289
For Lug Mount Hoist, drop “T” from model number prefix (example: WR-1016).
581-05
COFFING HOISTS
WRMT and WRMT-TVL Models – Motorized trolley suspensions with all the features of basic WR Models for added
flexibility in a variety of applications plus models for true vertical lifts.
• Rated loads of 1/2 and 1 ton.
• Adjustable for 6” to 18” American Standard I-Beams with recommended 4-foot
minimum radius.
• 230/460 volt motor standard. 115/230 (single phase), 575 and 208 volt motors are
optional.
• Two-speed available. 3 to 1 ratio (three phase only).
• Heat treated cast iron wheels equipped with sealed, lifetime lubricated precision ball
bearings for long life.
• Dual, articulating trolley mounts have excellent curved beam handling characteristics.
• Compact 4-button control station operates both hoist and trolley.
• True vertical lift models available – see chart below.
SPECIFICATIONS
Capacity Model Suspension Lift Motor Lift Speed Headroom Net Wt.
Lbs. Ton Number Reeving Type (Ft.) HP (fpm) (In.) (Lbs.)
1000 1/2 WRMT-1016 2-part Single Single 15 1/2 16 21-13/16 237
1000 1/2 WRMT-1016 2-part Single Dual 25 1/2 16 22-13/16 280
1000 1/2 WRMT-1016 2-part Single Dual 35 1/2 16 22-13/16 295
1000 1/2 WRMT-1032 2-part Single Single 15 1 32 21-13/16 245
1000 1/2 WRMT-1032 2-part Single Dual 25 1 32 22-13/16 288
1000 1/2 WRMT-1032 2-part Single Dual 35 1 32 22-13/16 303
2000 1 WRMT-2016 2-part Single Single 15 1 16 21-13/16 245
2000 1 WRMT-2016 2-part Single Dual 25 1 16 22-13/16 288
2000 1 WRMT-2016 2-part Single Dual 35 1 16 22-13/16 303
1000 1/2 WRMT-1016-TVL 2-part Double Dual 15 1/2 16 21-15/16 287
1000 1/2 WRMT-1016-TVL 2-part Double Dual 30 1/2 16 21-15/16 330
1000 1/2 WRMT-1032-TVL 2-part Double Dual 15 1 32 21-15/16 297
1000 1/2 WRMT-1032-TVL 2-part Double Dual 30 1 32 21-15/16 341
2000 1 WRMT-2016-TVL 2-part Double Dual 15 1 16 21-15/16 297
2000 1 WRMT-2016-TVL 2-part Double Dual 30 1 16 21-15/16 341
COFFING® HOISTS
• ELECTRIC CHAIN HOISTS – rated loads from 1/4 to 5 tons. Country Club Road • PO Box 779
• WIRE ROPE HOISTS – rated loads from 1/2 to 5 tons. Wadesboro, NC 28170 USA
• HAND CHAIN HOISTS – rated loads from 1/4 to 50 tons. Customer Service: 800-477-5003
FAX (attn: Dept. MA) 704-583-0594
• RATCHET LEVER HOISTS – rated loads from 3/4 to 15 tons. www.coffinghoists.com
0612-03 5/4/05 8:07 AM Page 1
582-05
COFFING HOISTS
ELECTRIC WIRE ROPE HOISTS – 2 & 3 Tons
Lug and Plain Trolleys
WR, WRT, and TVL Models – Wire Rope Hoists designed for industrial service, the WR incorporates mechanical
load brake, motor brake and overload clutch as standard. Other features are ergonomic-designed push button station,
solid state starting switch, panel plate with numbered connection wires and first stage helical gearing for quiet
operation. Available in single or double reeved models. TVL models available for true vertical lifts.
• Rated loads of 2 and 3 tons.
• Adjustable for 6” to 18” American Standard I-Beams with
recommended 4-foot minimum radius.
• 230/460 volt motors standard. 575 and 208 volt motors are
optional.
• Two-speed available. 3 to 1 ratio (three phase only).
• Capacity limiter on all models. Prevents lifting of damaging
overloads while operating hoist.
• Dual brake system consists of mechanical load brake and
multiple disc, direct acting motor brake.
• Adjustable upper and lower limit switches regulate load travel.
• Machined drum with uniform, precise grooving provides
smoother drum winding and longer rope life.
• Fully machined, cast iron wheels equipped with sealed,
lifetime lubricated precision ball bearings for long life.
• Hand chain operated geared trolley available.
• True vertical lift models available – see chart below.
SPECIFICATIONS
Lift Headroom
Capacity Model Suspension Lift Motor Speed (In.) Dimensions Net Wt.
Lbs. Ton Number Reeving Type (Ft.) (HP) (fpm) Trolley Lug H W L (Lbs.)
4000 2 WRT-4014 2-part Single Dual 22 2 14 28 26-1/4 11 13-7/8 43-5/16 439
4000 2 WRT-4014 2-part Single Dual 35 2 14 28 26-1/4 11 13-7/8 49-3/16 467
4000 2 WRT-4014 2-part Single Dual 44 2 14 28 26-1/4 11 13-7/8 54-13/16 487
4000 2 WRT-4021 2-part Single Dual 22 3 21 28 26-1/4 11 13-7/8 43-5/16 448
4000 2 WRT-4021 2-part Single Dual 35 3 21 28 26-1/4 11 13-7/8 49-3/16 476
4000 2 WRT-4021 2-part Single Dual 44 3 21 28 26-1/4 11 13-7/8 54-13/16 496
6000 3 WRT-6014 4-part Single Dual 22 3 14 28-7/8 27-1/16 11 13-7/8 54-13/16 528
6000 3 WRT-6014 4-part Single Dual 35 3 14 28-7/8 27-1/16 11 13-7/8 66-9/16 568
4000 2 WRT-4014-TVL 2-part Double Dual 15 2 14 25-3/4 24 11 13-7/8 50-3/8 489
4000 2 WRT-4014-TVL 2-part Double Dual 25 2 14 25-3/4 24 11 13-7/8 57-1/4 517
4000 2 WRT-4014-TVL 2-part Double Dual 35 2 14 25-3/4 24 11 13-7/8 64-3/16 537
4000 2 WRT-4021-TVL 2-part Double Dual 15 3 21 25-3/4 24 11 13-7/8 50-3/8 498
4000 2 WRT-4021-TVL 2-part Double Dual 25 3 21 25-3/4 24 11 13-7/8 57-1/4 526
4000 2 WRT-4021-TVL 2-part Double Dual 35 3 21 25-3/4 24 11 13-7/8 64-3/16 546
For Lug Mount Hoist, drop “T” from model number prefix (example: WR-4014).
583-05
COFFING HOISTS
WRMT and WRMT-TVL Models – Motorized trolley suspensions with all the features of basic WR Models for added
flexibility in a variety of applications plus models for true vertical lifts.
• Rated loads of 2 and 3 tons.
• Adjustable for 6” to 18” American Standard I-Beams with recommended 4-foot
minimum radius.
• Dual articulated trolleys have excellent curved beam handling characteristics.
• 230/460 volt motor standard. 575 and 208 volt motors are optional.
• Two-speed available. 3 to 1 ratio (three phase only).
• Heat treated cast iron wheels equipped with sealed, lifetime lubricated precision ball
bearings for long life.
• Compact 4-button control station operates both hoist and trolley.
• True vertical lift models available – see chart below.
SPECIFICATIONS
Capacity Model Suspension Lift Motor Lift Speed Headroom Net Wt.
Lbs. Ton Number Reeving Type (Ft.) HP (fpm) (In.) (Lbs.)
4000 2 WRMT-4014 2-part Single Dual 22 2 14 28 475
4000 2 WRMT-4014 2-part Single Dual 35 2 14 28 503
4000 2 WRMT-4014 2-part Single Dual 44 2 14 28 530
4000 2 WRMT-4021 2-part Single Dual 22 3 21 28 484
4000 2 WRMT-4021 2-part Single Dual 35 3 21 28 512
4000 2 WRMT-4021 2-part Single Dual 44 3 21 28 539
6000 3 WRMT-6014 4-part Double Dual 22 3 14 28-7/8 563
6000 3 WRMT-6014 4-part Double Dual 35 3 14 28-7/8 622
4000 2 WRMT-4014-TVL 2-part Double Dual 15 2 14 25-3/4 525
4000 2 WRMT-4014-TVL 2-part Double Dual 25 2 14 25-3/4 553
4000 2 WRMT-4014-TVL 2-part Double Dual 35 2 14 25-3/4 580
4000 2 WRMT-4021-TVL 2-part Double Dual 15 3 21 25-3/4 534
4000 2 WRMT-4021-TVL 2-part Double Dual 25 3 21 25-3/4 562
4000 2 WRMT-4021-TVL 2-part Double Dual 35 3 21 25-3/4 589
COFFING® HOISTS
• ELECTRIC CHAIN HOISTS – rated loads from 1/4 to 5 tons. Country Club Road • PO Box 779
• WIRE ROPE HOISTS – rated loads from 1/2 to 5 tons. Wadesboro, NC 28170 USA
• HAND CHAIN HOISTS – rated loads from 1/4 to 50 tons. Customer Service: 800-477-5003
FAX (attn: Dept. MA) 704-583-0594
• RATCHET LEVER HOISTS – rated loads from 3/4 to 15 tons. www.coffinghoists.com
0614-03 5/3/05 10:40 AM Page 614
584-05
COFFING HOISTS
ELECTRIC CHAIN HOISTS – HOOK & LUG SUSPENSION MODELS
EC MODELS – Hoists engineered for heavy duty industrial service. Designed for
safety, the EC incorporates mechanical load brake, motor brake, and overload
clutch as standard. Other features are ergonomic-designed push button station,
five-pocket load sheave, solid-state starting switch, adjustable limit switch, panel
plate with numbered connection wires, and chain end stop assembly.
• CAPACITIES & LIFTS – Rated loads from 1/4 to 5 tons, with 10, 15, and
20-foot standard lifts. Standard push button drop is 4 feet less than lift.
• VOLTAGES & MOTOR OPTIONS – 115/230, 208 - single phase; 230/460,
208, 220/380, 575 - three phase. 60 Hertz standard, 50 hertz available.
Two-speed motors available (3 to 1 speed ratio).
• SUSPENSION OPTIONS – Rigid or swivel top hook, lug, plain, geared,
and motorized trolley available.
• SMALL FRAME DESIGN – Features housings of cast aluminum alloy
construction for minimum weight. Engineered and designed for use with
motors up to 1 HP.
• LARGE FRAME DESIGN – Features load bearing housings of ductile iron
construction for maximum strength. Non-load bearing housings of cast
aluminum alloy for minimum weight. Engineered and designed for use with
1/4 - 5 Ton
higher torque 2 and 3 HP three phase motors.
• DURABLE CONSTRUCTION – Built in compliance with ASME/ANSI B30.16
and CSA standards.
Capacity Model Frame* No. of Motor Lift Speed (FPM) Headroom Housing Dimensions (in.) Net Wt.**
(Lbs.) (Ton) Number Size Chains HP Single Two (In.) H W L (Lbs.)
500 1/4 EC-0516 S 1 1/4 16 5.3 16-7/8 8 11-5/8 23-3/8 100
500 1/4 EC-0532 S 1 1/2 32 10.7 16-7/8 8 11-5/8 23-3/8 108
500 1/4 EC-0564 S 1 1 64 21.3 16-7/8 8 11-5/8 23-3/8 116
1000 1/2 EC-1009 S 1 1/4 9 3 16-7/8 8 11-5/8 23-3/8 104
1000 1/2 EC-1016 S 1 1/2 16 5.3 16-7/8 8 11-5/8 23-3/8 106
1000 1/2 EC-1032 S 1 1 32 10.7 16-7/8 8 11-5/8 23-3/8 118
2000 1 EC-2004 S 2 1/4 4 1.3 18-1/4 8 11-5/8 23-3/8 116
2000 1 EC-2008 S 2 1/2 8 2.7 18-1/4 8 11-5/8 23-3/8 116
2000 1 EC-2012 S 1 3/4 12 4 16-7/8 8 11-5/8 23-3/8 114
2000 1 EC-2016 S 1 1 16 5.3 16-7/8 8 11-5/8 23-3/8 118
2000 1 EC-2032 L 1 2 32 10.7 23 10-7/8 14-13/16 31-3/16 295
4000 2 EC-4006 S 2 3/4 6 2 18-15/16 8 11-5/8 23-3/8 127
4000 2 EC-4008 S 2 1 8 2.7 18-15/16 8 11-5/8 23-3/8 133
4000 2 EC-4016 L 1 2 16 5.3 23 10-7/8 14-13/16 31-3/16 295
4000 2 EC-4024 L 1 3 24 8 23 10-7/8 14-13/16 31-3/16 302
6000 3 EC-6005 S 3 1 5 1.7 23-1/4 8 12 26-3/8 200
6000 3 EC-6010 L 2 2 10 3.3 27-3/8 10-7/8 14-13/16 31-3/16 340
6000 3 EC-6016 L 2 3 16 5.3 27-3/8 10-7/8 14-13/16 31-3/16 347
8000 4 EC-8008 L 2 2 8 2.7 27-3/8 10-7/8 14-13/16 31-3/16 345
8000 4 EC-8012 L 2 3 12 4 27-3/8 10-7/8 14-13/16 31-3/16 352
10000 5 EC-10005 L 3 2 5 1.7 27-7/8 10-7/8 14-13/16 31-3/16 393
10000 5 EC-10008 L 3 3 8 2.7 27-7/8 10-7/8 14-13/16 31-3/16 393
* S = Small frame hoist, parallel mounted, single or three phase. L = Large frame hoist, cross mounted, three phase only.
** For 10 ft. lift, top hook suspension and lug suspension units.
585-05
COFFING HOISTS
Capacity Model Frame* Trolley‡ ECT & ECGT ECMT Flange Beam Min. Rad. Net Wt.** ECMT Net † Specify ECT for plain trolley,
(Lbs.) (Ton) Number size Mount Hdrm. (In.) Hdrm. (In.) Width (In) Ht. (In.) Curve (In.) (Lbs.) Wt. (Lbs.) ECGT for geared trolley, and
ECMT for motorized trolley
500 1/4 EC(†)-0516 S P 17-1/4 17-1/4 3.332-6 6-18 48 145 180 models.
500 1/4 EC(†)-0532 S P 17-1/4 17-1/4 3.332-6 6-18 48 153 188 * S = Small frame hoist, single or
500 1/4 EC(†)-0564 S P 17-1/4 17-1/4 3.332-6 6-18 48 161 196 three phase. L = Large frame
1000 1/2 EC(†)-1009 S P 17-1/4 17-1/4 3.332-6 6-18 48 151 186 hoist, three phase only.
≠ P = Parallel mount, standard on
1000 1/2 EC(†)-1016 S P 17-1/4 17-1/4 3.332-6 6-18 48 151 186 small frame hoists. C = Cross
1000 1/2 EC(†)-1032 S P 17-1/4 17-1/4 3.332-6 6-18 48 163 198 mount, standard on large frame
2000 1 EC(†)-2004 S P 18-5/8 18-5/8 3.332-6 6-18 48 161 196 hoists.
2000 1 EC(†)-2008 S P 18-5/8 18-5/8 3.332-6 6-18 48 161 196 ** Weight for 10 ft. lift ECT units.
Add 10 lb. for ECGT unit weights.
2000 1 EC(†)-2012 S P 17-1/4 17-1/4 3.332-6 6-18 48 158 194 *** 4 & 5 ton straight track only.
2000 1 EC(†)-2016 S P 17-1/4 17-1/4 3.332-6 6-18 48 163 198 Articulated model for 48” min.
2000 1 EC(†)-2032 L C 21-9/16 22-1/4 3.332-6 6-18 48 347 375 radius curved track available.
4000 2 EC(†)-4006 S P 19-5/16 19-5/16 3.332-6 6-18 48 172 207
4000 2 EC(†)-4008 S P 19-5/16 19-5/16 3.332-6 6-18 48 178 213
4000 2 EC(†)-4016 L C 21-9/16 22-1/4 3.332-6 6-18 48 347 375
4000 2 EC(†)-4024 L C 21-9/16 22-1/4 3.332-6 6-18 48 354 362
6000 3 EC(†)-6005 S P 23-1/4 24 3.332-6 6-18 48 260 320
6000 3 EC(†)-6010 L C 26 26-5/8 3.332-6 6-18 48 396 424
6000 3 EC(†)-6016 L C 26 26-5/8 3.332-6 6-18 48 403 431
8000 4 EC(†)-8008 L C 25-15/16 26-3/4 4-6 8-18 *** 520 560
8000 4 EC(†)-8012 L C 25-15/16 26-3/4 4-6 8-18 *** 527 567
10000 5 EC(†)-10005 L C 29-3/4 30-5/8 4-6 8-18 *** 561 599
10000 5 EC(†)-10008 L C 29-3/4 30-5/8 4-6 8-18 *** 568 606
®
• ELECTRIC CHAIN HOISTS – rated loads from 1/4 to 5 tons. COFFING ® HOISTS
COFFING HOISTS
Country Club
Country ClubRoad
Road • PO BoxBox
• PO 779779
• WIRE ROPE HOISTS – rated loads from 1/2 to 5 tons. Wadesboro, NC 28170 USA
Wadesboro, NC 28170 USA
• HAND CHAIN HOISTS – rated loads from 1/4 to 50 tons. Customer Service: 800-477-5003
Customer Service: 800-477-5003
FAX (attn: Dept. MA) 704-583-0594
• RATCHET LEVER HOISTS – rated loads from 3/4 to 15 tons. FAX (attn: Dept. MA) 704-583-0594
www.coffinghoists.com
0616-03 5/3/05 10:41 AM Page 1
586-05
COFFING HOISTS
CHAIN CONTAINERS – Recommended where slack chain may create a hazardous condition. Containers suspend
from hoist and do not interfere with hoist operation. Suspension bracket included.
587-05
COFFING HOISTS
ELECTRIC CHAIN HOISTS – EC Models
Features and Applications
Corrosion Semi-Automatic
Resistant • Requires only a momentary depression of push
Features button to raise or lower hook to preset position.
• Zinc plated load chain, • Limit switch permits adjustment of end stops
hand chain, and hook anywhere within range of lifts.
• Stainless steel limit • Stop button allows stops between limits.
switch shaft & wheels
• Bronze wheels Multi-Level
• Epoxy paint • Hoist can be specified with multiple control
pendants or wall stations.
Spark Resistant Features
• Stainless steel load chain, bottom block assembly, Inching Controls
trolley wheels, and hooks • Selector switch allows hoist operation in normal or
• Bronze hooks and trolley wheels jog mode.
• Aluminum hand chain • In jog mode, each depression of button advances
• Rubber trolley bumpers hook a fraction of an inch (field adjustable).
• Can be supplied with jog adjustment potentiometer
Tandem Applications inside hoist enclosure or on push button station.
• Twin hooks move long, unwieldy loads.
Patented Carrier
• Push button control station allows hoist to be operated
• Rated load from 1/4 to 3 tons.
either simultaneously or individually.
• On request, hoist units can be furnished with suitable
• Hoists connected mechanically or electrically.
lugs for mounting on patented track carriers.
• Available with plain, geared, and motorized trolleys.
Key Lock
Twin Hook • Key lock on push buttons prevent unauthorized
• Same as tandem trolley application, except hoist has hoist use.
hook or lug suspension for fixed position operation. • Multiple stations keyed unlike – unless specified.
EC - 05 16 - 1 - 10
COFFING® HOISTS
• ELECTRIC CHAIN HOISTS – rated loads from 1/4 to 5 tons. Country Club Road • PO Box 779
• WIRE ROPE HOISTS – rated loads from 1/2 to 5 tons. Wadesboro, NC 28170 USA
• HAND CHAIN HOISTS – rated loads from 1/4 to 50 tons. Customer Service: 800-477-5003
FAX (attn: Dept. MA) 704-583-0594
• RATCHET LEVER HOISTS – rated loads from 3/4 to 15 tons. www.coffinghoists.com
3066 - 04 5/3/05 10:43 AM Page 1
588-05
COFFING HOISTS
Capacity Model No. of Motor Lift Speed (FPM) Headroom* Housing Dimensions (in.) Net Wt.**
(lb.) (ton) Number Chains HP Single Two (in.) H W L (lb.)
250 1/8 JLC-0232 1 1/4 32 10.7 18-1/8 8-11/16 8-11/16 24-1/8 63
500 1/4 JLC-0516 1 1/2 16 5.3 18-1/8 8-11/16 8-11/16 24-1/8 63
500 1/4 JLC-0532 1 1/2 32 10.7 18-1/8 8-11/16 8-11/16 24-1/8 75
1000 1/2 JLC-1016 1 1/2 16 5.3 18-1/8 8-11/16 8-11/16 24-1/8 75
1000 1/2 JLC-1032 1 1 32 10.7 18-1/8 8-11/16 8-11/16 24-1/8 88
2000 1 JLC-2016 1 1 16 5.3 18-1/8 8-11/16 8-11/16 24-1/8 90
4000 2 JLC-4008 2 1 8 2.7 20-13/16 8-11/16 8-11/16 24-1/8 100
* For hook and lug mounted models only. **Weight and dimensions for 10 ft. lift, single phase, top hook and lug suspension units.
589-05
COFFING HOISTS
ELECTRIC CHAIN HOISTS
TROLLEY MOUNT – JLC SERIES
• Manual & motorized trolleys - cross mounted, single and
dual speed models.
• Wrap-around side plates - Act as safety lugs and as bumpers
to protect wheels. Available to fit American Standard I-Beams,
wide-flange, and patented track beams.
• Precision trolley wheels - Dual tread trolley wheels fit either flat
or tapered I-Beams. Also available in bronze or stainless steel.
• H4 duty rating
• Weather resistant - Hoist is NEMA 3R enclosure.
• Five-Pocket load sheave - Provides smoother lifting and
reduces chain wear.
Manual
• Mechanical overload protection device - Helps protect hoist,
operator, and supporting structures from damaging overloads,
chain jamming and reverse phasing.
• Limit switches - Adjustable to regulate upper and lower
load travel.
• Multiple disc motor brake
• Chain end stop assembly - Fits below dead end link on lifting
chain for added measure of protection.
• Oil bath transmission - Precision machined alloy steel gears
run in oil bath for longer, quieter operation.
• Capacities & Lifts - Standard lifts of 10, 15 and 20 feet.
CSA approved.
• Voltages - 115/230 - single phase, switchable between 115
& 230; 230/460, 208, 380, 415, 575 – three phase 60 Hertz
standard, 50 Hertz available. Specify voltage.
Motorized
• IEC Style Electrical Controls
• Hoist Motor – Finned aluminum housing and Class F insulation.
2-speed with 3 to 1 speed ratio available.
Capacity Model Trolley ‡ JLCET JLCMT JLCET Flange* Beam Min. Rad. JLCET JLCMT
(lb.) (ton) Number Mount Hdrm (in.) Hdrm (in.) Width (in.) Ht. (in.) Curve (in.) Net Wt. (lb.) Net Wt. (lb.)
250 1/8 JLC(†)-0232 C 17-15/16 17-15/16 3-8 5 - 12 48 87 173
500 1/4 JLC(†)-0516 C 17-15/16 17-15/16 3-8 5 - 12 48 87 173
500 1/4 JLC(†)-0532 C 17-15/16 17-15/16 3-8 5 - 12 48 99 185
1000 1/2 JLC(†)-1016 C 17-15/16 17-15/16 3-8 5 - 12 48 91 185
1000 1/2 JLC(†)-1032 C 17-15/16 17-15/16 3-8 5 - 12 48 112 198
2000 1 JLC(†)-2016 C 17-15/16 17-15/16 3-8 5 - 12 48 114 200
4000 2 JLC(†)-4008 C 20-5/8 20-5/8 3.33 - 8 6 - 18 60 156 210
† Specify JLCET for plain trolley and JLCMT for motorized trolley models. ‡ C = Cross mount, standard on all JLC trolley models.
* For JLCMT models, standard flange adjustment is 3.33 - 7”.
COFFING® HOISTS
• ELECTRIC CHAIN HOISTS – rated loads from 1/4 to 5 tons. Country Club Road • PO Box 779
• WIRE ROPE HOISTS – rated loads from 1/2 to 5 tons. Wadesboro, NC 28170 USA
• HAND CHAIN HOISTS – rated loads from 1/4 to 50 tons. Customer Service: 800-477-5003
FAX (attn: Dept. MA) 704-583-0594
• RATCHET LEVER HOISTS – rated loads from 3/4 to 15 tons. www.coffinghoists.com
0618-03 5/3/05 10:45 AM Page 1
590-05
COFFING HOISTS
Model SLC SHOP HOIST – 250 – 1000 lbs. Capacity
• H4 duty cycle (300 motor starts/hour). • D.C. braking system
• Standard protector overload device • Cast aluminum alloy frame
• 10-pocket oblique lay liftwheel provides longer chain wear • 5:1 design factor
• Epoxy powder coat finish • Rigid hook suspension prevents tangling of power cord
• 6-1/2 ft. power cord with molded 3-prong plug on 115-volt units • Hardened forged steel, latch-style lower hook rotates 360°
• NEMA 4 industrial-rated pendant control • True vertical lift
• Gear train – lifetime lubricated with non-oxidizing grease • Totally enclosed, non-ventilated hoist frame protects motor from
• Alloy load chain (zinc plated optional) environmental contamination
• Thermally protected hoist duty motor • Optional impact-resistant chain container available
• Weighs less than 20 pounds and operates at 100% (A5) duty cycle
• Efficient rotary vane motor provides high uniform torque for quick response, and smooth, quiet operation
• Handle-mounted pendant control can be adjusted for right or left-handed operation. Sure-grip handle provides
easy one-handed use.
• Precise and infinite speed control for accurate load spotting
• Auto-Stop Valve prevents lowering the unit past the maximum reach; wire rope will not reverse-wind in the hoist.
• Swivel top and bottom hooks with latches standard, for portability and quick installation
• Self-winding lifting cable stores conveniently inside unit.
• Disc Brake secures load and eliminates drift when pendant is released.
• Note - 3/8” NPT air filter - regulator - lubricator is needed for effective operation.
Spark resistant features are not available.
591-05
COFFING HOISTS
AIR POWER – MODEL CAH – LARGE FRAME
Variable Speed Control
Coffing Large Frame, Model CAH Air Powered Hoist – Large frame air chain hoists featuring
continuous duty service for precise, infinitely variable speed and accurate load spotting.
• CAPACITIES & LIFT – Rated loads of 1, 2 & 3 ton. 10-foot standard lift, longer lifts available.
• CONTROLS – Pendant throttle is full-flow design. 6-foot pendant hose length for
10-foot lift (4 feet less than lift is standard).
• THROTTLE VALVE – Precision throttle valves meter air for smooth starts.
• SUSPENSION – Swivel top and bottom hooks with safety latches standard. Rigid top
hook, lug, plain, geared, and air motor trolleys available.
• SPEEDS – Precise and infinitely variable speed control for accurate load spotting.
90 PSI air operating pressure.
• ALUMINUM HOUSING – Lightweight, compact, and strong.
• MOTOR – 8-vane rotary air motor produces high, uniform torque and quick response.
Internal muffler for quiet operation.
• GEARING – Combination of precision cut, heat-treated helical and spur gears for
efficient operation.
• MECHANICAL LOAD BRAKE – Positive acting Weston-type load brake holds the
load and provides exacting load spotting and control.
• OVERLOAD CLUTCH – Protects hoist, operator, and supporting structures from
1/2 - 3 Ton
damaging overloads. Clutch acts as upper and lower limits.
• SPARK RESISTANT MODELS – Rated loads 1/2, 1 & 2 ton.
• OPTIONS – Corrosion resistant models and chain containers also available.
• AIR SUPPLY – Inlet size: 3/4” NPTF; Supply hose: 3/4” I.D. min.
COFFING® HOISTS
• ELECTRIC CHAIN HOISTS – rated loads from 1/4 to 5 tons. Country Club Road • PO Box 779
• WIRE ROPE HOISTS – rated loads from 1/2 to 5 tons. Wadesboro, NC 28170 USA
• HAND CHAIN HOISTS – rated loads from 1/4 to 50 tons. Customer Service: 800-477-5003
FAX (attn: Dept. MA) 704-583-0594
• RATCHET LEVER HOISTS – rated loads from 3/4 to 15 tons. www.coffinghoists.com
0620-03 5/3/05 11:29 AM Page 620
592-05
COFFING HOISTS
AIR POWER – MODEL CAH – SMALL FRAME
Continuous Duty – Precise Positioning
Coffing Small Frame, Model CAH Air Powered Hoist – Small frame air chain
hoists features accurate load spotting for specialized lifting applications.
• CAPACITIES & LIFT – Rated loads of 1/4, 1/2, and 1 ton. 10-foot standard
lift, longer lifts available.
• CONTROLS – Pull Cord provides a lightweight, economical option for
accurate control of loads. Pendant Throttle provides one-hand control for
ease of operation. 6-foot control drop length for 10-foot lift (4 feet less than
lift is standard).
• CHAIN OPTIONS – Link-type or roller-type load chain.
• SUSPENSION – Swivel top and bottom hooks with safety latches standard.
Rigid top hook, lug, plain, geared, and air motor trolleys available.
• COMPACT CONSTRUCTION – Ideal for use in areas with restricted space.
Aluminum housing provides strength and portability.
• MOTOR – 8-vane motor provides high torque, smooth starting, and excellent
load control.
• LIMIT STOPS – Prevent over-travel in upper and lowering directions.
• BRAKE – Heavy-duty shoe-type with proven design for stopping and holding
loads. Externally adjustable.
• SPARK RESISTANT MODELS – Rated loads of 3/8 and 3/4 ton.
• OPTIONS – Chain container available. Plated chain optional for corrosion
resistance.
• AIR SUPPLY – Inlet size: 3/8” NPTF; Supply hose: 1/2” I.D. min.;
Exhaust: 1/2” NPTF; Consumption: 48 SCFM at 90 PSI. 1/4 - 1 Ton
• LIFETIME WARRANTY
593-05
J. D. NEUHAUS L.P.
AIR HOISTS
TECHNICAL
Type 6 TI 10 TI 16 TI 20 TI 25 TI 37 TI 50 TS 100 TI
Capacity mt 6.3 10 16 20 25 37 50 100
No. of chain strands 2 2 3 4 2 3 4 4
Motor output kw 3.5 3.5 3.5 2.5 6 6 6 10
without load ft/min 16.4 10.5 6.6 3.28 7.55 5.25 4.26 2.3
m/min 5 3.2 2 1 2.3 1.6 1.3 0.7
Lifting speed
ft/min 8.2 5.24 3.3 1.64 3.61 2.13 1.48 1.15
at full load
m/min 2.5 1.6 1.0 0.5 1.1 0.65 0.45 0.35
ft/min 17.7 11.15 6.9 4.26 6.23 4.92 4.59 2.62
Lowering speed at full load
m/min 5.4 3.4 2.1 1.3 1.9 1.5 1.4 0.8
at full load cfm 113 113 113 102.7 194.8 194.8 194.8 390
Air consumption
lifting m3/min 3.2 3.2 3.2 2.9 5.5 5.5 5.5 11
Air connection inch G 3/4 G 3/4 G 3/4 G 3/4 G1 G1 G 1 G 1-1/2
Weight with lbs. 242 343 528 627 1096 1936 1881 5412
standard lift kg 110 156 240 285 498 880 855 2460
Chain dimension mm 13 x 36 16 x 45 16 x 45 16 x 45 22 x 66 22 x 66 22 x 66 31 x 90
lbs/ft 2.55 3.9 3.9 3,9 7.25 7.25 7.25 14.3
Weight of chain
kg/m 3.8 5.8 5.8 5.8 10.8 10.8 10.8 21.3
feet 10 10 10 10 10 10 10 10
Standard lift
m 3 3 3 3 3 3 3 3
DIMENSIONS
Dimensions 6 TI 10 TI 16 TI 20 TI 25 TI 37 TI 50 TS 100 TI
inch 26.5 32.0 35.4 42.9 50.5 57.7 66.9 86.6
A* Min. headroom
mm 674 813 898 1090 1282 1466 1700 2200
inch 17.9 21.6 23.5 27.9 37.9 36.8 45.7 63
B
mm 454 548 598 708 963 935 1160 1600
inch 9.2 12.1 15.0 15.4 15.5 14.84 17.4 27.8
C
mm 233 308 382 390 393 377 442 705
inch 19.0 22.6 27.0 30.2 33 31.77 38.7 55.8
D
mm 483 575 692 768 839 807 983 1417
inch 1.6 1.7 2.1 2.9 2.9 4.05 4.05 4.7
E1
mm 40 44 53 75 75 103 103 120
inch 1.6 1.7 2.1 2.9 2.9 4.05 4.05 4.7
E2
mm 40 44 53 75 75 103 103 120
to center of hook inch 6.1 7.8 7.8 4.3 5.7 20.39 9 12.3
F*
without chain box mm 154 197 199 110 144 518 229 440
inch 9.2 12.0 12.1 14.2 24 29.3 21.2 327
G maximum width
mm 233 306 308 360 610 745 539 767
J. D. Neuhaus L. P.
P. O. Box 1155_9 Loveton Circle_Sparks, Maryland 21152
410.472.0500_fax: 410.472.2202_800.331.2889_email: info@jdneuhaus.com
Locations Worldwide - Manufacturer of Premium Hoists from 1/4 Ton to 100 Ton Capacity.
Visit our website for locations and distributors: www.jdneuhaus.com
0622-03 5/3/05 11:31 AM Page 622
594-05
TROLLEYS
Plain trolley (LN) pushed or Geared trolley (LH) pulled by the Motorized trolley (LM) powered
pulled by hand reel chain by a pneumatic motor
TECHNICAL DIMENSIONS
Type Hoist 6 TI 10 TI 15 TI 20 TI 25 TI Type Hoist 6 TI 10 TI 15 TI 20 TI 25 TI
Plain Trolley LN 4-8t LN 10-15t LN 20t LN 25t inch 19.29 23.62 29.53
A LN mm 490 600 750
Geared Trolley LH 4-8t LH 10-15t LH 20t LH 25t
1 TS inch 19.29 23.62 29.53
Motor Trolley LM 4-8t LM 10-15t LM 20t LM 25t A LH + LM mm 490 600 750
Capacity mt 6 10 15 20 25 inch 5.55 5.75 5.08 4.92
264 B LN mm 141 146 129 125
lbs 257.4 510 975
Trolley weight LN 120
kg 117 229 443 inch
B LH + LM mm
lbs 280 286 527 1003
Trolley weight LH; LM
kg 127 130 239 455 inch b + 2.76 b + 2.68
C LN mm b + 70 b + 68
Hoist weight, standard lift lbs 193.6 275 418 627 1184
kg 88 125 190 285 538 inch b + 2.76 b + 2.68
C LH + LM mm b + 70 b + 68
lbs/ft 2.55 3.9 3.9 3.9 7.25
Weight of chain
kg/m 3.8 5.8 5.8 5.8 10.8 inch 5.55 5.75 5.08 4.92
D LN mm 141 146 129 125
Number of chain strands # 1 2 2 3 4
hoist kw 2.2 2.6 6 inch 12.09 12.28 12.13 12.13
Motor output D LH + LM
trolley kw 0.7 mm 307 312 308 308
cfm 85 102.7 194.8 inch 7.87 8.46 12.68 9.41 16.1
Air consumption at full load E
m3/min 2.4 2.9 5.5 mm 200 215 322 239 409
Air consumption cfm 46.06 inch 3.82 4.72 5.63 5.24 6.14
at full load F
motor trolley m3/min 1.3 mm 97 120 143 133 156
Travelling distance geared 30ft ft 4.92 inch 7.87 9.45 9.45 15.35 15.47
trolley, chain reel off 1.5 G mm 240 240 390 393
10m m 200
Travelling speed ft/min 39 inch 10.94 11.1 11.1 14.92 18.74
motor trolley 11.9 H mm 278 282 282 379 476
m/min
Minimum radius measured inch 39.37 59.06 inch 29.33 37.01 39.17 44.88 60.24
to inner edge of the beam mm mounted mm 745 940 995 1140 1530
1000 1500 J
inch 2.56 2.95 3.15 min. headroom inch 34.84 44.09 47.83 58.07 68.7
LN mm suspended
Max. bottom flange 65 75 80 mm 885 1120 1215 1475 1745
thickness inch 2.56 2.95 3.15 inch 7.8 8.56 11.1
LH + LM K LN
mm 65 75 80 mm 198 217.5 282
Max. bottom flange inch 12.2 inch 7.8 8.56 11.1
width b mm K LH + LM mm 198 217.5 282
310
Min. bottom flange inch 4.92 6.1 7.28 inch 1.57 1.65 1.77 3.03 4.06
L mm 42 45 77 103
width b mm 125 155 185 40
inch 2.17 2.99 3.86 3.39 3.39
M mm 76 98 86 86
55
J. D. Neuhaus L. P.
P. O. Box 1155_9 Loveton Circle_Sparks, Maryland 21152
410.472.0500_fax: 410.472.2202_800.331.2889_email: info@jdneuhaus.com
Locations Worldwide - Manufacturer of Premium Hoists from 1/4 Ton to 100 Ton Capacity.
Visit our website for locations and distributors: www.jdneuhaus.com
0623-03 5/3/05 11:33 AM Page 623
595-05
TECHNICAL
Type EH 20 EH 25 EH 37.5 EH 50 EH 75 EH 100
Capacity mt 20 25 37.5 50 75 100
Number of chain strands # 4 2 3 4 3 4
trolley kw 0.6 1.2 1.2 1.2 2.4 2.4
Motor output
hoist kw 2.5 6 6 6 10 10
ft/min 3.28 8.5 5.25 3.6 2.75 2.13
without load
m/min 1 2.6 1.6 1.1 0.84 0.65
Lifting speed
ft/min 1.64 3.6 2.13 1.64 1.47 1.15
at full load
m/min 0.5 1.1 0.65 0.5 0.45 0.35
ft/min 4.25 7.22 4.25 3.25 3.25 2.46
Lowering speed at full load
m/min 1.3 2.2 1.3 0.99 0.99 0.75
ft/min 44 44 44 44 44 44
without load
m/min 13.4 13.4 13.4 13.4 13.4 13.4
Traveling speed
ft/min 39 39 39 39 39 39
at full load
m/min 11.9 11.9 11.9 11.9 11.9 11.9
cfm 28.3 56.5 56.5 56.5 113 113
trolley
m3/min 0.8 1.6 1.6 1.6 3.2 3.2
Air consumption
cfm 102.7 194.8 194.8 194.8 390 390
hoist m3/min 2.9 5.5 5.5 5.5 11 11
Air connection inch G 3/4 G 1 1/2 G 1 1/2 G 1 1/2 G 1 1/2 G 1 1/2
lbs 1365 2090 3674 3916 8800 12540
Weight with standard lift
kg 620 950 1670 1780 4000 5700
Chain dimension mm 16 x 45 22 x 66 22 x 66 22 x 66 31 x 90 31 x 90
lbs/ft 3.9 7.25 7.25 7.25 14.3 14.3
Weight of chain
kg/m 5.8 10.8 10.8 10.8 21.3 21.3
feet 10 10 10 10 10 10
Standard lift
m 3 3 3 3 3 3
DIMENSIONS
Dimensions EH 20 EH 25 EH 37.5 EH 50 EH 75 EH 100
J. D. Neuhaus L. P.
P. O. Box 1155_9 Loveton Circle_Sparks, Maryland 21152
410.472.0500_fax: 410.472.2202_800.331.2889_email: info@jdneuhaus.com
Locations Worldwide - Manufacturer of Premium Hoists from 1/4 Ton to 100 Ton Capacity.
Visit our website for locations and distributors: www.jdneuhaus.com
0624-03 5/3/05 11:34 AM Page 624
596-05
TECHNICAL
Type M 64 M63 D M 771 B 241 B 481 B 612
Capacity mt 1/2 3/6 12 1.6/3.2 4/8 6 / 12
Number of chain strands # 1/2 1/2 1/1 1/2 1/2 1/2
Motor output kw 0.77 1.3 6 0.8 1.5 1.5
ft/min 26.3 / 13.1 16.4 / 8.2 15.7 26.3 / 13.1 19 / 9.5 12.5 / 6.2
without load
m/min 8/4 5 / 2.5 4.8 8/4 5.8 / 2.9 3.8 / 1.9
Lifting speed
ft/min 9.8 / 4.9 7.2 / 3.6 6.2 11.5 / 5.7 5.6 / 2.8 3.6 / 1.8
at full load
m/min 3 / 1.5 2.2 / 1.1 1.9 3.5 / 1.7 1.7 / 0.8 1.1 / 0.5
ft/min 41 / 20.6 19.7 / 9.8 14.7 29.5 / 14.7 19 / 9.5 12.5 / 6.2
Lowering speed at full load
m/min 12.5 / 6.3 6/3 4.5 9 / 4.5 5.8 / 2.9 3.8 / 1.9
cfm 35.3 77.7 194.8 60 81.2 81.2
Air consumption at full load
m3/min 1 2.2 5.5 1.7 2.3 2.3
Air connection inch G 3/4 G 3/4 G1 G 3/4 G 3/4 G 3/4
lbs 136 228 572 156 264 433
Weight with standard fit
kg 62 104 260 71 120 197
Chain dimension mm 9 x 27 13 x 36 22 x 66 9 x 27 13 x 36 16 x 45
lbs/ft 1.2 2.55 7.25 1.2 2.55 3.9
Weight of chain
kg/m 1.8 3.8 10.8 1.8 3.8 5.8
feet 20 /10 20 / 10 10 20 / 10 20 / 10 20 / 10
Standard lift
m 6/3 6/3 3 6/3 6/3 6/3
DIMENSIONS
Dimensions M 64 M 63 D M 77 B 24 B 48 B 612
A1 inch 23.74 29.53 45.28 23.94 30.4 36.22
mm 603 750 1150 608 772.5 920
A2 inch 25.98 34.25 45.28 25.63 31.97 39.29
mm 660 870 1150 651 812 998
B1 inch 12.32 14.57 23.03 12.2 16.46 18.19
mm 313 370 585 310 418 462
B2 inch 14.57 19.29 23.03 13.9 18.01 21.26
mm 370 490 585 353 457.5 540
C inch 6.89 9.33 14.8 9.06 11.28 12.99
mm 175 237 376 230 286.5 330
D inch 14.76 19.96 31.73 18.31 22.72 25
mm 375 507 806 465 577 635
E1 inch 1.18 1.57 1.65 1.18 1.57 1.65
mm 30 40 42 30 40 42
E2 inch 1.18 1.57 1.65 1.18 1.57 1.65
mm 30 40 42 30 40 42
E3 inch 1.18 1.18 1.65 1.18 1.18 1.57
mm 30 30 42 30 30 40
F inch 5.67 7.68 14.76 5.75 7.17 9.13
mm 144 195 375 146 182 232
1
Available in 85 psi (6 bar) version.
J. D. Neuhaus L. P.
P. O. Box 1155_9 Loveton Circle_Sparks, Maryland 21152
410.472.0500_fax: 410.472.2202_800.331.2889_email: info@jdneuhaus.com
Locations Worldwide - Manufacturer of Premium Hoists from 1/4 Ton to 100 Ton Capacity.
Visit our website for locations and distributors: www.jdneuhaus.com
0625-03 5/3/05 11:35 AM Page 625
597-05
HYDRAULIC HOISTS
TECHNICAL
Chain Intake Intake Chain Weight Weight with
Type Capacity Lifting speed Standard lift
strands pressure volume dimension of chain standard lift
mt ft/min m/min ft m No. PSI bar cfm l/min mm lbs/ft kg/m lbs kg
Type M 63 H
Model
33-Z- 8-316 3 7.22 2.2 10 3 1 1950 130 0.68 24 13 x 36 2.55 3.8 200.2 91
33-Z-16-316 3 7.22 2.2 10 3 1 1500 100 1.36 48 13 x 36 2.55 3.8 200.2 91
33-Z-16-203 3 11.16 3.4 10 3 1 1500 100 1.36 48 13 x 36 2.55 3.8 200.2 91
36-Z- 8-316 6 3.61 1.1 10 3 2 1950 130 0.68 24 13 x 36 2.55 3.8 246.4 112
36-Z-16-316 6 3.61 1.1 10 3 2 1500 100 1.36 48 13 x 36 2.55 3.8 246.4 112
36-Z-16-203 6 5.58 1.7 10 3 2 1500 100 1.36 48 13 x 36 2.55 3.8 246.4 112
Type B 48 H
Model
44-Z- 8-334 4 6.89 2.1 10 3 1 1950 130 0.68 24 13 x 36 2.55 3.8 237.6 108
44-Z-16-334 4 6.89 2.1 10 3 1 1500 100 1.36 48 13 x 36 2.55 3.8 237.6 108
44-Z-16-213 4 10.83 3.3 10 3 1 1500 100 1.36 48 13 x 36 2.55 3.8 237.6 108
48-Z- 8-334 8 3.45 1.05 10 3 2 1950 130 0.68 24 13 x 36 2.55 3.8 279.4 127
48-Z-16-334 8 3.45 1.05 10 3 2 1500 100 1.36 48 13 x 36 2.55 3.8 279.4 127
48-Z-16-213 8 5.25 1.6 10 3 2 1500 100 1.36 48 13 x 36 2.55 3.8 279.4 127
Type B 612 H
Model
66-Z- 8-626 6 4.27 1.3 10 3 1 1950 130 0.68 24 16 x 45 3.9 5.8 367.4 167
66-Z-16-626 6 4.27 1.3 10 3 1 1500 100 1.36 48 16 x 45 3.9 5.8 367.4 167
66-Z-16-448 6 5.91 1.8 10 3 1 1500 100 1.36 48 16 x 45 3.9 5.8 367.4 167
612-Z- 8-626 12 2.13 0.65 10 3 2 1950 130 0.68 24 16 x 45 3.9 5.8 442.2 201
612-Z-16-626 12 2.13 0.65 10 3 2 1500 100 1.36 48 16 x 45 3.9 5.8 442.2 201
612-Z-16-448 12 2.79 0.85 10 3 2 1500 100 1.36 48 16 x 45 3.9 5.8 442.2 201
For hook up to a central hydraulic, closed center, system. Hydraulic fluid: Oil only
DIMENSIONS DIMENSIONS
Dimensions M 63 H B 48 H B 612 H Dimensions M 63 H B 48 H B 612
Locations Worldwide - Manufacturer of Premium Hoists from 1/4 Ton to 100 Ton Capacity.
Visit our website for locations and distributors: www.jdneuhaus.com
0598-04 5/3/05 11:35 AM Page 768
598-05
Model K7-E1
115 v. Model KP5E
Model K7-E2
230 v.
Model M5-1
115 v. Model MP6
Model M5-2
230 v.
Model M5-E1
115 v. Model MP6-E
Model M5-E2
230 v.
Cleaning Power Horse- •Electric tools available in 115 and 230 volt
Model Area Supply Power Weight
models with AC/DC, 50/60 cycle universal
K7-1 115V motors. 15 feet of three-conductor cable included.
1/8 9 lbs.
K7-2 5” Wide 230V
•Pneumatic models feature rotary type air motors,
KP-5 AIR 3/4 6 lbs.
free from toggles, pistons or reciprocating parts
K7-E1 115V to eliminate vibration. Operating Range;
1/8 11 lbs.
K7-E2 8” Wide 230V 70-100 P.S.I/42 C.F.M.
KP5-E AIR 3/4 7.5 lbs.
•Models M5-E1, M5-E2 and MP6-E are furnished with
M5-1 115V a 48-inch detachable aluminum handle allowing one
1/2 21 lbs.
M5-2 8” Wide 230V man to operate the tool with speed and ease over
large flat areas. This handle is available as an option
MP6 AIR 2-1/2 17 lbs.
on Models M5-1, M5-2 & MP6.
M5-E1 115V
1/2 27 lbs.
M5-E2 12” Wide 230V •Vacuum guards (dust /collector/guard) are
available for all models except the models K*-*E.
MP6-E AIR 2-1/2 24 lbs.
599-05
VON ARX AG
VIBRATION-DAMPENED NEEDLE SCALERS
Air-powered descaling tools with patented vibration-dampening system and ergonomic design. Available with or without HEPA
(high efficiency particle absorption) filtered collection systems (for hazardous material abatement). Vacuum shroud sold separately.
NP Series: Single-piece steel construction with pistol valve. NP-K Series: Non-metallic construction with trigger mechanism.
NP 23
SCALER MODEL NP 23 NP 23-K NP 34 NP 34-K
Weight 2.6 kg 2.2 kg 3.2 kg 3.0 kg
5.7 lbs. 4.8 Ibs. 7.1 Ibs. 6.6 lbs.
NP 23-K Blows per minute 3800 3800 3500 3500
Air consumption 100 l/min 100 l/min. 125 l/min. 125 l/min.
3.5 cfm 3.5 cfm 4.3 cfm 4.3 cfm
Needles (3mm/0.12") 19 19 28 28
NP 34 Air pressure (max.) 7 bar 7 bar 7 bar 7 bar
100 psi 100 psi 100 psi 100 psi
Connection thread R 3/8" R 1/4" R 3/8" R 1/4"
Air pressure level 99 dB (A) 99 dB (A) 99 dB (A) 99 dB (A)
NP 34-K
Acoustic power level 109 dB (A) 109 dB (A) 109 dB (A) 109 dB (A)
Weighted, effective
acceleration on handle* 3.04 m/s2 3.63 m/s2 3.24 m/s2 3.89 m/s2
VACUUM SHROUD Order Number 700616 700722 706194 706598
for 23 & 34 Series Needle Scalers
*average calculated value according to ISO 8662-14
For use on projects requiring total
containment of lead paint and other
toxic coatings. Constructed of high POWER EDGER (Scaler)
impact resistant, non-metallic material. VA 10L
Rotary blades. Adjustable handle
NEEDLE TYPE DECK SCALER for use in hard-to-reach areas.
NPG 7 Dimensions 330 x 360 x 1320 mm
13 x 14 x 52 in.
Weight 45 kg
Working 100 mm
100 Ibs.
Width 4 in.
Dimensions 800 x 260 x 940 mm
Distance to 20 mm
31.5 x 10.2 x 37 in.
Wall 0.8 in.
Air 875 l/min.
Weight 22 kg
Consumption 30.8 cfm
48 Ibs.
Air Pressure 7 bar
Order No.
(max.) 100 psi
706634 1 x 110 V 60 Hz
Needles/ ø (3 mm)
Tools ø (0.12 in.) 702311 1 x 230 V 50 Hz
Order No. 700135
SCALER MODEL DK 1G DK 1H DK 1P
LONG REACH AND PISTOL PNEUMATIC SCABBLERS long handle long handle pistol
DK 1G, DK 1H, DK 1P Weight 4.3 kg 3.1 kg 3 kg
9.5 Ibs. 6.8 lbs. 6.6 lbs.
Length 1650 mm 645 mm 250 mm
65 in. 25.4 in. 9.8 in.
Air Consumption 160 l/min. 160 l/min. 160 l/min.
5.7 cfm 5.7 cfm 5.7 cfm
Air Pressure (max.) 7 bar 7 bar 7 bar
100 psi 100 psi 100 psi
Connection Thread R 3/8" R 3/8" R 3/8"
Order No. 700756 700763 700528
(DK 1G 30˚ Angle) 700758
(DK 1G 45˚ Angle) 700760
(DK 1G 60˚ Angle) 700762
600-05
ANTI VIBRATION
CT-16 60 mm
CT-12 45 mm
CT-X 35 mm
MP-2
CT-9 35 mm MP-6
MP-4 Crosshead
pistons only
601-05
ROTARY SCALERS
Specify air powered or electric RX-2000
WALK BEHIND
Cutters ROTARY DECK
WCT SOLID TUNGSTEN
3.5 CUTTER SCALER
with dust hood
KR8 TUNGSTEN
POINTED (for use with 637
CUTTER scaling wheel)
SR METAL CUTTER
JR-637 ROTARY 2.5 HEAT TREATED
HAND-HELD SCALERS SR 5 METAL CUTTER 110 or 230 volts
A – pneumatic 13 cfm @ 90 psi HEAT TREATED Weight: 80 lbs.
E – electric 110 or 230 volts SR 30 TUNGSTEN
COATED
Weight: 10 lbs. ROLLER
Optional Dust hood.
ROTARY DECK SCALER
FS-1500-E for use with scarifying cutters FS-1500-G
Electric FS-1500 Gas
Power 1.5 KW electric 220/440 Volts
5.5 HP gasoline
Working Width 9"
Overall Width 16"
Height 40"
Weight 150 lbs
602-05
603-05
NOVATEK CORPORATION
Flexible Shaft Scalers
This scaler will rapidly remove scale, rust, paint and other • 25% lighter than other similar machines
unwanted deposits or buildups while leaving the surface • Ergonomic handle design
ready for priming, painting or coating applications. It allows • Automatic thermal protection on electric motors
operator to reach difficult • Available with swivel base to avoid tangle of the shaft
to reach areas on both • Supplied with: 10 ft. (3m) flexible shaft,