Professional Documents
Culture Documents
Fire resistant with heat and sound Certified ISO Standard Suitable for ceiling panels and interior Metric Metric :
transmission control. Smooth, TIS 219-2552 and walls. 1200 X 2400 mm.
beautiful, yet highly functional manufactured in
surface. Easy cut for quick accordance with
installation. Guarantee no health ASTM C1396, BS 1230 Imperial Imperial : 4’X 8’
hazard.
Extra heat penetration control with In test conducted Suitable for the area which requires Metric Metric :
metalized film firmly bonded to the according to JIS R 3106 to high control of natural heat, for 1200 X 2400 mm.
back side to provide 86% reflection check the reflective value instance, ceiling panels under roof, loft
of thermal radiation, allowing of sun ray and ASTMC36 and wall directly facing the sun ray.
comfort temperature level in the and BS 1230 to check the Imperial Imperial : 4’X 8’
area. reflective value of heat
Metalized Film Laminated Type
Extra moisture resistance with Moisture absorption level In wet area where humidity is greatly Metric Metric :
mixture of non vapor absorption of less than 5% in present such as ceiling in water closet 1200 X 2400 mm.
material. Green facing paper accordance with BS 1230 & kitchen. Designed as a base ceramic
encased to withstand the effect of Standard tile.
moisture and high humidity. Imperial Imperial : 4’X 8’
Greater resistance to fire formulated Designed to resist fire in Area which requires special protection Metric Metric :
by adding noncombustible fiber to accordance ASTM E119, BS from fire such as computer room, 1200 X 2400 mm.
the gypsum and encased with pink 476 PART 22 elevator, fire escape stair and interior
glutinous compressed paper to walls in the building. Imperial Imperial : 4’X 8’
enhance its strength. Manufactured
to provide fire resistance rating from
½-4 hours.
Capability to reduce echo and Tested the sound Mainly used in wall and ceiling wherever Metric Metric :
absorb sound through the circle and absorption capability you wish to increase sound absorption (R-1, R-2, R-8, S-8) 1200 X 2400 mm.
square holes and bonded to back according to NFEN 20354 or achieve a desired decorative finish.
side with Glass Matt. Achieve sound and ISO/DIS 11654 Used in open plan area where there is a
absorption rating of NRC 0.65-0.80 need to absorb sound people’s voice so
that they do not disturb people in
other area of the room.
Applications Characteristics
• Concealed Ceiling Use Gypsum Board Elphant Brand 9 or 12 mm. • Tapered edge Suitable for installation and • Square edge Suitable for cutting
thickness installed with Elephant ProLine Concealed Ceiling jointing the edge with gypsum plaster e.g. into ceiling tiles for T-bar ceiling.
Metal Profile Elephant Brand concealed ceiling and partition.
- Suitable for designed and decorative ceiling with modern look.
It could be applied for step ceiling, down light or curve ceiling. Tapered edge gypsum board
Jointing Plaster
Tape
• Interior wall & partition Use Gypsum Board Elephant Brand
12 or 15 mm. thickness installed with Wall Stud ProWall Become smooth after plastering
Elephant Brand. Or use Gypsum Board Elephant Brand as a wall
lining on brick wall instead of mortar by installing with EasyBond The edge of board is tapered. When install
(glue plaster) or metal stud C-line. the board side by side, the edge appears a
- Suitable for interior partition which requires strength yet light V-shape besin which will be filled with
weight in order to reduce size of building structure and also jointing plaster so the surface becomes
shorten period of installation. smooth and beautiful finished
Elephant Ceiling Tiles
Elephant Ceiling Tiles is factory-finished decorative product which could be applied with Elephant T-Bar ceiling
stud without any additional adjustment. With a variety of surfaced designs and usability, Elephant Gypsum Tile
could be perfectly applied to match with the wide range of the application purposes.
A Gypsum Tile surfaced with beautiful and modern vinyl, making it easy
• Well decoated surface Office, Restaurant, 9 600 x 600
to cleans.
• Easy to clean Department Store,
• Able to maintain a perfect Kitchen, Hospital,
condition at 90% relative Factory 12 600 x 1200
humidity
• High Light Reflection at 89%
Snow White Sand Orange Skin • Non-combustible, fire-resistance
A Gypsum Tile with the texture design and color covered on the surface, • Available in various designs Office, School, 9 600 x 600
allowing the immediate use without additional painting. • Well decorated surface Condominium,
• 91% high light reflection Department Store,
• Light weight, easy to install Factory 12 600 x 1200
Product Features
• High quality finish. No more crack and sandy surface.
• Time saving. Just after dried out, you can proceed the next step.
• Easy to mix and apply due to the very soft compound body so it provides good mixing qualities
with minimal effort.
• Health and safety. No hazardous additives.
Technical Specification
ZerveBoard is a prefabricated 9mm thick ceiling service board that is designed to seamlessly blend in with other ceiling board
products. ZerveBoard comes in a selection of different types and designs for interior designs such as square corner,
rounded-corner and other standard forms for general rooms as well as in MoistBloc specially used in bathrooms, toilets or
kitchens. Each set is composed of ceiling board
and frame.
In addition, tailor-made options are available that can be customised for special applications
such as different widths and lengths, opening operation method, gypsum board type as well as
other types for special applications.
Features
Easy installation, saving time as the prefabricated board can be attached at the
Traditional ceiling service board
site promptly and without delay.
Neat appearance service board without a frame that blends in with existing
ceiling boards.
Easy-to-open/close with good strength and of high-quality material.
Allows you to add an opening to an existing ceiling without the need for entire
disassembly.
Flexibility to install at any location without it causing a visual annoyance.
How to install
1. Choose the size of the ZerveBoard you wish to install and mark its
position on the concealed ceiling.
2. Install Pro C Line on the marked position. In case of selected position is
under the upper Pro C Line, make sure that Pro C Line is cut down to fit.
3. Attach the outer piece of ZerveBoard to the lower Pro C Line using
black screws with a spacing at a maximum of 150mm along the
circumference.
4. Cover the joint with Elephant Cotton Tape then plaster the joint and
screw heads with Easy Joint compound.
5. Going through the outer piece, place the inner piece of ZerveBoard on
top making sure it is secured firmly.
*Note: The paint should only be applied after both pieces of ZerveBoard
are installed in the ceiling.
Elephant Alpha Board
Elephant AlphaBoard is a prefabricated Gypsum Board manufactured with high technology from cutting and
compositing the right angle for step ceiling design. AlphaBoard is available in various design, followed the
English alphabets L, U, Z and W shapes
Usage Area :
AlphaBoard can be used in different areas. It helps giving and creating variation
to the design.
• Step ceiling
• Step ceiling with hidden lights
• Step ceiling for curtain rags
• Multiple step ceiling
• Step partition
*For commercial use, it can be made to order in specific size and corner.
Elephant ProLine Drywall Ceiling Metal Profiles
Pro C-Line component parts have been designed by experts for practical
application at job sites. Features include safer loading capacity, easy installation
of Elephant brand access panels (ZerveBOARD), lighting panels, lighting
fixtures, step ceilings (bulkheads), and direct fixing to wooden frames.
Pro C-Lines can also be used in Elephant brand wall lining systems.
Specifications
Gauge 0.52 mm
Dimensions 15 x 37 mm
Length 4 M (per piece)
Weight 1.2 kg (per piece)
Applications 15 cm
Features
Strong & Safe : Manufactured from high quality, certified cold-rolled galvanized steel of 0.52 mm gauge. Specially
designed profile increases system strength. All component parts (accessories) were specially
designed and tested for safety.
Rust Proof : Manufactured from high quality galvanized steel to meet TIS Standard 863-2523 with rust-proof.
Easy & Fast Installation : With high manufacutring technology, ensuring every pieces of products are manufactured under
high consistent standard, having the quick and easy installation.
Lightweight : Lighter weight than wood frames and more durable.
Cost Saving : Economical, time and cost saving for any installations.
Insect-Free : Free from termites and other insects, suitable for humid climates, and decreasing rusting problems.
Siam Gypsum is the market leader in the design, manufacturer and supply of
Gypsum Wall and Ceiling Solutions throughout the ASEAN region. Widely
recognized from the “Elephant” brand, Siam Gypsum has gained the confidence
and trust from the market due to the consistency and quality of its products and
its focus on continuous improvement.
Siam Gypsum is part of USG BORAL. USG BORAL is Asia's largest international
manufacturer of Gypsum board production facilities in Malaysia, South Korea,
China, Vietnam, Indonesia, Thailand and India, with additional distribution
branches in Singapore Philippines, U.A.E and Hong Kong. Boral Limited is
Australia’s largest building and construction material supplier in Australia, and
has significant operations in USA and in Asia. With some A$4.7 billion worth sales,
Boral has over 15,200 employees working across over 700 operating sites.
The Siam Gypsum Industry (Saraburi) Co., Ltd. For more information,
Pakin Building, 5th floor, 9 Ratchadapisek Road, please contact SCG Cambodia
Dindang, Bangkok 10400 THAILAND
Tel: +66 2 555 0007 Fax: +66 2 555 0003