Professional Documents
Culture Documents
About OffCon: OffCon is an MS EXCEL based checklist and calculation tool for verification of the design of
offshore containers. This program does not include any detailed analysis of the container framework. Detailed
frame analysis may be performed using DNV 3-D Beam or other beam calculation programs.
The program is copyright by Det Norske Veritas, and is based on the rule requirements of DNV Standard for Certification
2.7-1 January 2006. The program is available for clients applying for offshore container certification at DNV. Feedback
and comments are appreciated: e-mail: MTPNO876@dnv.com.
Identification
Client Project No.
Project Name 0
Calculations
14. Four point lift: 2,5xR (Only primary structure included)
15. Two point lift: 1,5xR for open frames (incl. all structure)
16. Fork pocket lift: 1,6xR
17. Frame analysis carried out (computer analysis)
18. Padeye stresses
19. Impact loads
20. Floor plate stress from internal loading: 2,5xP/A
21. Wall stress from internal loading: 0,6xP/A
22. Strength of intermediate deck
23. IMDG Requirements (DG tank containers)
Other Comments:
Beam span
L= 4343 mm
Yield strength of material
Re = 324 N/mm2
Maximum bending stress and deflections due to simulated impact in middle of span
Other frame members of the side structure, including top rails: F = 0,15*R*g
Length Bending stress (N/mm2) Deflections (mm) Max. Allowable
deflection L/250 (mm) *
fixed - fixed fixed - free free-free fixed - fixed fixed - free free-free
3843 195.18 292.77 390.36 11.26 20.14 45.03 15.37
4343 220.58 330.87 441.15 16.25 29.07 65.00 17.37
4843 245.97 368.96 491.94 22.53 40.31 90.13 19.37
Padeye Design
Client: 0 Time: 14:50
Project: 0 Date: 18.11.07
Project No.: 0
Reference: Section 4.2.3.1 Lifting with lifting set and Appendix D. Design of pad eye.
Calculated stresses
Tear out stress N/mm2
Contact stress, 6% clearence N/mm2 Steel only
Shackle dimensions
Minimum bolt diameter
Dmin = 0,94xDh = 0.00 mm
Check if the pad eye input is suitable to any shackle as listed in EN 13889:2000
-> Approved services -> Products and Manufacturers-> Type Approval -> Containers, Cargo Handling, Lifting
Appliances and Miscellaneous Equipment (S) -> Lifting Sets
Lifting Set Calculations
Client: 0 Time: 14:50
Project: 0 Date: 18.11.07
Project No.: 0
Fore runner
Load on quad assembly 27.59 t
Forerunner requirements
Load on forerunner 27.59 t
Wirerope sling, fibre core EN 13414-1 52 mm Quad assembly
Wirerope sling, steel core EN 13414-1 52 mm
Chain sling EN 818-4 32 mm
Sling leg requirements
Load per sling leg 13.01 t
Wirerope sling, fibre core EN 13414-1 36 mm
Wirerope sling, steel core EN 13414-1 36 mm β Sling leg
Chain sling EN 818-4 22 mm
Shackle requirements
Load on each shackle 13.01 t
Recommended min.
standard shackle EN 13889 13.5 t Shackle
http://exchange.dnv.com/
-> Approved services -> Products and Manufacturers-> Type Approval -> Containers, Cargo Handling, Lifting
Appliances and Miscellaneous Equipment (S) -> Lifting Sets