You are on page 1of 3

T13 Rainbow Tile Mate Epoxy

TILE FIXING PRODUCTS


THREE-COMPONENT EPOXIDE RESIN BASED CERAMIC TILE JOINT FILLER

Description
Roff Rainbow Tile Mate (RTM) Epoxy is a stainless, chemical resistant, hard wearing & impervious tile joint filler
with a high degree of resistance to abrasion and impact. Roff RTM Epoxy can also be used as a high performance
epoxy adhesive for fixing ceramic / vitrified tiles.

Areas of Application
Abattoirs, Chemical Plants, Food & Breweries Processing Units, Swimming Pools, Hospitals, Restaurant Kitchens,
Shopping Malls and Sports Centres

Features & Benefits


}} Stainless and easy to clean

Rainbow Tile Mate Epoxy


}} Easy to mix and apply
}} Provides excellent chemical resistant property
}} Provides hygienic, hard wearing and impervious properties
}} Non-cracking or powdering
}} Can be cleaned after application with a damp sponge
}} Non-toxic & restricts entry of bacteria/dirt

Method of Application
}} Before commencing grouting, ensure that the tiles fixed are sound and joints are free from tile fixing adhesive.

T13
}} The tile joints should be free from any contamination, dust, oil and water. Clean the joints by possible
means and ensure that they are not in damp condition.
}} Shake the bottle of HARDENER and stir the BASE prior to mixing.
}} Add 119g of HARDENER to 167g of BASE in a suitable, clean container and mix together thoroughly.
If an electric drill mixer is used, mix at a slow speed (less than 300 rpm).
}} Add slowly the 714g quantity of the FILLER, mixing thoroughly until all of the FILLER is dispersed and
a uniform colour and lumps-free consistency is achieved.
}} Avoid entraining air by mixing at very high speed or by over-mixing.

Application
}} Using a hard rubber squeeze, press the grout firmly into the joints ensuring that the joints are completely
filled.
}} Work in small areas to have better control on removing the excess grout material from joints and surface
by moving the squeeze diagonally to the grout lines.
}} Clean off the surplus grout from tile joints and surface within 10-15 minutes. Initially use a rough textured
sponge dampened with clean water to clean the excess grout and to remove the grout residue.
}} Use the damp sponge in a circular motion and keep it relative to the tile surface to achieve the flush joint.
Do not allow water to flow or run into ungrouped joints.
}} Clean the epoxy/water residue with a fine textured damp sponge in a circular motion, taking care not to
drag epoxy grout from the joints.
}} Clean off any light residue of epoxy left on the tile surface using an alkaline detergent with out disturbing
the joint finish.

CCRFTFRTMEP1214A
T13 Rainbow Tile Mate Epoxy

TILE FIXING PRODUCTS


THREE-COMPONENT EPOXIDE RESIN BASED CERAMIC TILE JOINT FILLER

Precautions & Limitations


}} Do not apply Rainbow Tile Mate-Epoxy on wet/damp tile joints. Always apply on completely dry tile joints.
}} Do not allow water to flow/run into ungrouted joints while application.
}} Do not allow the residue to remain on the surface more than 24 hrs.
}} Do not over-mix the material. Over-mixing can reduce the pot life of the mixed quantity.
}} Ensure adequate ventilation during application in working places.
}} Strictly do not add water in to the Roff RTM Epoxy.
}} are should be taken to avoid staining tile while grouting unglazed floor tiles, natural stones tiles
C
with Matt glaze or textured surfaces.
}} pply masking tapes along tile joints while working on unglazed floor tiles, natural stones tiles with
A
matt glaze or textured surfaces.

Rainbow Tile Mate Epoxy


}} Do not use this product for grouting tiles with metal décor or lustre.
}} Part mixing is not allowed.

Technical Information
Nature : Three components (Hardener, Base & Filler)
Specific Gravity (Mixed) : 1.74 (± 0.03)
Mixing Ratio : 50 Part Hardener + 70 Part Base + 300 Part Filler (By Wt.)
Pot Life : Min. 45 minutes @ 30°C

T13
Setting Time : 24 hrs @ 30°C
Water Absorption : Nil
Shelf Life : Base & Hardener - 12 Months (When stored unopened in normal,
dry frost free conditions).
Filler - 36 Months (when sealed pack stored in proper condition).

Mix Consistency : Smooth Paste
Shear Strength (14 Days) : > 30 KN (BS 5980 Min. Value 8.9KN)
Joint Width : 2 mm - 20 mm

Coverage

Tile Size (mm x mm) Tile Thickness (mm) Joint Width (mm) Coverage (Kg / sq. mtr.)

300 X 300 7 2 0.16 Kg / sq. mtr.

300 X 200 7 2 0.20 Kg / Sq. mtr.

200 X 200 5 2 0.17 Kg / Sq. mtr.

150 X 150 5 2 0.23 Kg / Sq. mtr.

The coverage mentioned in table is indicative only and can vary as per the tile size, thickness, joint width &
wastage during application.
T13 Rainbow Tile Mate Epoxy

TILE FIXING PRODUCTS


THREE-COMPONENT EPOXIDE RESIN BASED CERAMIC TILE JOINT FILLER

Chemical Resistance

Prolonged Contact :
Aluminum Bromide, Aluminum Flouride, Baking Soda, Barium Hydroxide, Beer, Boric Acid, n-Butanol, Calcium
Chloride, Carbonates, Carbonic Acid, Castor Oil, Chlorides, Chlorinated Paraffin, Citric Acid, Coconut Oil,
Cotton Seed Oil, Diesel, Dilute Detergents, Ethanol, Ethylene Glycol,Fats, Ferric Chloride, Fish Oil, Gasoline,
Groundnut Oil, Kerosene, Linseed Oil, lubricating Oils, Milk, Nitrates, Olive Oil, Palm Kernel Oil, Palm Oil,
Paraffin Wax, Pine Oil, Potassium Hydroxide, Silicates, Sodium Carbonate, Sodium Chloride, Soybean Oil,
Sugar, Sulphates, Sunflower Oil, Tannic Acid, Vegetable Oil, Water & White Sprit.

Max. 24 Hrs :
Acetic Acid (5%), Ammonium Bromide (5%), Household Ammonia, Hydrochloric Acid (dil), Lactic Acid (3%),

Rainbow Tile Mate Epoxy


Methanol, Phosphoric Acid (10%), Sodium Hydroxide,

Splash Contact :
Acetic Acid (10%), Acetone, Acetyl Bromide, Benzene, Carbon disulphide, Carbon Tetrachloride, Chloroform,
Chromic Acid, Ethyl Alcohol, Formic Acid, Lime Juice, Nitric Acid (10%), Phenol, Sulphuric Acid (20%), Methylene
Chloride, Methylene Formamide.
Please consult Technical Dept., CC Division of Pidilite Industries Ltd.

Packaging
}} Roff Rainbow Tile Mate Epoxy (B + H) - 286g & 1.43 kg

T13
}} Roff Rainbow Tile Mate Epoxy Filler - 714g & 3.57 kg
}} Available in 22 Attractive shades

Pidilite Industries Limited DISCLAIMER The product information & application details given by the
company & its agents has been provided in good faith & meant to serve
Construction Chemicals Division
only as a general guideline during usage. Users are advised to carry out
Ramkrishna Mandir Road tests & take trials to ensure on the suitability of products meeting their
Post Box No. 17411 requirement prior to full scale usage of our products. Since the correct
identification of the problems, quality of other materials used and the on-
Andheri (E) Mumbai 400059 INDIA
site workmanship are factors beyond our control, there are no expressed
Tel +91-22-2835 7000 • Fax +91-22-2835 7008 or implied guarantee / warranty as to the results obtained. The company
website : www.roff.in • E-mail : roff@pidilite.co.in does not assume any liability or consequential damage for unsatisfactory
Toll Free No.: 1800-209-5504 results, arising from the use of our products.

You might also like