Professional Documents
Culture Documents
WE GUIDE
AIR
75 25
28
28
Sand Filter
STL
HEIGHT - 10mm
freely sliding
HEIGHT - 10mm
(Optional)
>> The sand trap louver is made of aluminum
section/ GI sheet. It is composed of two sets
of inverted U-channels, mounted vertically
on two opposite rows.
>> The sand trap louver is used at the fresh
air inlet. It can lower the dust loading of
c o n v e n t i o n a l fi l t r a t i o n a s i t i s d e s i g ne d
t o separate large size sand particles at l o w
t o m e d i u m s p e e d s . I t c a n b e fi t t e d with a
bird/insect screen mesh.
28
>> The sand trap louver is a self emptying
system, it has a set of holes at the bottom
of the casing to discharge separated
28
sand particles.
Handle riveted
to frame
50 100
Frame of
hole Sand Filter
75
25
50
28 28
Sand Filter
WIDTH - 10mm
View detail
from arrow A
SAND TRAP LOUVERS BOTTOM VIEW DETAILS
Ordering Key:
S T L A/ G SSWM SF SIZE
STLA: SAND TRAP LOUVER IN ALUMINIUM
STLG: SAND TRAP LOUVER IN GI
--: WITHOUT SCREEN/WIRE MESH
IS: G.I. INSECT SCREEN
SSWM: STAINLESS STEEL WIRE MESH
--: WITHOUT FILTER
SF: WITH SLIDING 1 INCH THICK ALUMINUM FILTER
SF2: WITH SLIDING 2 INCH THICK ALUMINUM FILTER
SIZE: WIDTH X HEIGHT NECK SIZE FOR STL MODEL
**NOTE: 2000 MM X 2000 MM IS MAXIMUM SINGLE SECTION SIZE
01
SAND TRAP LOUVERS - STL
LOUVERS
>
E
f
>
c
SAND REJECTION EFFECTIVENESS DATA a
h
t
>
in
a
>
E
>
3
02
LOUVERS
SAND TRAP LOUVERS - STLC
75 25
Handle of
75 25 Sand Filter
28
28
Sand Filter
freely sliding
STLC (Optional)
HEIGHT
>> The sand trap louver is made of aluminum
section/ GI sheet. It is composed of two sets of
HEIGHT
inverted U-channels, mounted vertically on
two opposite rows.
>> The sand trap louver is used at the fresh air
inlet duct. It can lower the dust loading of
conventional filtration as it is desig ned to
separate large size sand particles at low to Sand Chute
medium speeds. It can be fitted with a
bird/insect screen mesh.
Sand Chute
70
>> The sand trap louver is a self emptying 28
system, it has a set of holes at the bottom and a
chute to discharge separated sand particles.
70
>> Tested by ANSI/ AMCA 500-L
28
50 100
Handle riveted
hole to frame
Frame of
75
Sand Filter
25
50
28 28
Ordering Key:
S T L C A/G SSWM SF SIZE
STLCA: SAND TRAP LOUVER WITH CHUTE IN ALUMINIUM
STLCG: SAND TRAP LOUVER WITH CHUTE IN GI
--: WITHOUT SCREEN/WIRE MESH
IS: G.I. INSECT SCREEN
SSWM: STAINLESS STEEL WIRE MESH
--: WITHOUT FILTER
SF: WITH SLIDING 1 INCH THICK ALUMINUM FILTER
SF2: WITH SLIDING 2 INCH THICK ALUMINUM FILTER
SIZE: WIDTH X HEIGHT OUTER SIZE FOR STLC MODEL
**NOTE: 1219 MM X 1219 MM IS MAXIMUM SINGLE SECTION SIZE
Beta Industrial LLC certifies that the STLC shown hereon is licensed to bear the
AMCA Seal. The ratings shown are based on tests and procedures performed in
accordance with AMCA Publication 511 and comply with the requirements of the
AMCA Certified Ratings Program.
The AMCA Certified Ratings Seal applies to Air Performance, Wind Driven Rain and Wind
Driven Sand.
The beginning point of water penetration is 232.6 fpm
Test Information
Tested in accordance with ANSI/AMCA 500-L, Figure 5.5 Test sample size is 1219mm x 1219mm (48 in. x 48 in.) Air Performance
data are based on intake performance
The sand grading used for the test is between 76μm - 699μm as per AMCA 500-L.
>
E
f
>
c
a
h
t
>
in
a
>
E
>
SAND REJECTION EFFECTIVENESS DATA FREE AREA CHART (SQUARE FEET) 3
TYPE OF FIXING
Ordering Key:
E A L 2 A/G IS SIZE
EAL2A: EXHAUST AIR LOUVER WITH 2 INCH DEPTH IN ALUMINIUM
EAL2G: EXHAUST AIR LOUVER WITH 2 INCH DEPTH IN GI
--: WITHOUT SCREEN/WIRE MESH
IS: WITH G.I. INSECT SCREEN
SSWM: WITH STAINLESS STEEL WIRE MESH
SIZE: WIDTH X HEIGHT
**NOTE: 2000 MM X 2000 MM IS MAXIMUM SINGLE SECTION SIZE
05
4 INCH EXHAUST AIR LOUVERS - EAL-4
LOUVERS
100
50
50 50 Wire mesh
screen
HEIGHT - 10mm
WIDTH - 10mm
103
>
m
o
>> The exhaust air louver is composed of a set of blades made of 2MM
n
aluminum extruted pro file / GI sheet arranged in 45 degree in horizontal
a
rows and inclined downward to protect against rain water.
>> The exhaust air louver is used in cooling, heating and air ventilation >
50
applications for intake & discharge. f
>> Frame depth 100MM, spacing 87MM & blade angle 45 . Screw
>
>> The wall mounted exhaust air louver EAL-4 is a weather proof a
external cover for air inlet and discharge openings.
>
FREE AREA CHART (SQUARE FEET)
1
>
Ordering Key:
E A L 4 A/G IS SIZE
EAL4A: EXHAUST AIR LOUVER WITH 4 INCH DEPTH IN ALUMINIUM
EAL4G: EXHAUST AIR LOUVER WITH 4 INCH DEPTH IN GI
--: WITHOUT SCREEN/WIRE MESH
IS: WITH G.I. INSECT SCREEN
SSWM: WITH STAINLESS STEEL WIRE MESH
SIZE: WIDTH X HEIGHT (NECK SIZE)
**NOTE: 1119 MM X 1119 MM IS MAXIMUM SINGLE SECTION SIZE
The AMCA Certified Ratings Seal applies to Air Performance and Water Penetration ratings.
The beginning point of water penetration is 752.1 fpm
Test Information
Tested in accordance with ANSI/AMCA 500-L, Figure 5.5Test sample size is 1219mm x 1219mm (48
in. x 48 in.) (Out to Out). Air Performance data are based on intake performance
PRESSURE DROP DATA
>
m
o
n
a
>
f
>
a
>
1
>
TYPE OF FIXING
SCREW CLIP
FIXING FIXING
Ordering Key:
G A L B CR SSWM SIZE
GALB: GRAVITY AIR LOUVER WITH BRASS BUSHES
GAL: GRAVITY AIR LOUVER WITHOUT BUSHES
--: WITHOUT CONNECTING ROD ON BLADES
CR: WITH CONNECTING ROD ON BLADES
--: WITHOUT SCREEN/WIRE MESH
IS: WITH G.I. INSECT SCREEN
SSWM: WITH STAINLESS STEEL WIRE MESH
SIZE: WIDTH X HEIGHT
**NOTE: 2000 MM X 2000 MM IS MAXIMUM SINGLE SECTION SIZE
08
LOUVERS
FRESH AIR LOUVERS - FAL / FALD
LOUVERSL
TYPE OF FIXING
TYPE OF FIXING
>> The wall mounted fresh air louver is a >
simple form of filter louver. It is composed c
of an exhaust louver with an aluminum w
filter fixed at the back. fi
350
300
>> Natural anodized aluminum finish.
250 >
>> Powder coated to RAL codes.
200 >
150
>> Free area ratio (approx.) = 0.37
100
>> To calculate the air flow rate :
50
0
CFM = 0.37 X A (in’’) X B(in”) X Face velocity (fpm)
0 1 2 3 4 5
144
C
L/S = 0.37 X A (mm) X B (mm) X Face velocity (m/s) FACE VELOCITY, m/s
1000
L
Ordering Key:
F A L DB SIZE
FRESH AIR LOUVER (WITH 1” AL FILTER)
--: WITHOUT DAMPER
DB: WITH BLACK DAMPER
DM: WITH MILL FINISH DAMPER
SIZE: WIDTH X HEIGHT
**NOTE: 2000 MM X 2000 MM IS MAXIMUM SINGLE SECTION SIZE
09
FRESH AIR LOUVERS - HINGED - FALH/FALHD
LOUVERS
TYPE OF FIXING
Ordering Key:
F A L H DB SIZE
HINGED FRESH AIR LOUVER (WITH 1” AL FILTER)
--: WITHOUT DAMPER
DB: WITH BLACK DAMPER
DM: WITH MILL FINISH DAMPER
SIZE: WIDTH X HEIGHT
**NOTE: 2000 MM X 2000 MM IS MAXIMUM SINGLE SECTION SIZE
10
LOUVERS
ALUMINIUM FILTER - AF
LOUVERSL
ALUMINIUM FILTER
1” Dessert
Filter from
Aluminium
W 23.0 mm
19.5 mm
Ordering Key:
A F 2 SIZE
ALUMINUM FILTER
--: 1” THICK AL FILTER
2: 2” THICK AL FILTER
SIZE: WIDTH X HEIGHT
11