Professional Documents
Culture Documents
1 PAGE 1 OF 11
ISSUED ON: September 15, ’96
Model Skaylark Volt/Hz Date of Serial Number
Modification
Modified Article Parts Catalog
Reason for
Parts Catalog correction
Modification
Page No. 5
Not listed:
Page No. 7
Not listed:
Page No. 9
Not listed:
Page No. 11
Description correction:
Page No. 13
Incorrect Correct
Index No. Drawing No.
Part Number Description Part Number Description
A1842500 Paper Tray Unit A1842510 Paper Tray Unit * -
A1842553 Bottom Plate Pad A1842620 Bottom Plate Pad 8 Drawing 4
MODIFICATION BULLETIN NO. 1 PAGE 3 OF 11
ISSUED ON: September 15, ’96
Page No. 15
Not listed:
Page No. 21
Not listed:
Incorrect Correct
Index No.
Part Number Description Part Number Description
A1845302 Lower Main Harness A1845302 Lower Main Harness - 120V 4
A1835328 Lower Main Harness - 230V (A183) 4
A1845328 Lower Main Harness - 230V (A184) 4
16070623 Ferrite Core - TFC-16-8-13 16070663 Ferrite Core - TFC-20-10-10 109
MODIFICATION BULLETIN NO. 1 PAGE 4 OF11
ISSUED ON: September 15, ’96
Page No. 25
Not listed:
* The location of the above part on the main control board is L108.
Page No. 27
DETAILS OF MODIFICATION
Drawing 1
MODIFICATION BULLETIN NO. 1 PAGE 6 OF 11
ISSUED ON: September 15, ’96
DETAILS OF MODIFICATION
Drawing 2
MODIFICATION BULLETIN NO. 1 PAGE 7 OF 11
ISSUED ON: September 15, ’96
DETAILS OF MODIFICATION
Drawing 3
MODIFICATION BULLETIN NO. 1 PAGE 8 OF 11
ISSUED ON: September 15, ’96
DETAILS OF MODIFICATION
Drawing 4
MODIFICATION BULLETIN NO. 1 PAGE 9 OF 11
ISSUED ON: September 15, ’96
DETAILS OF MODIFICATION
Drawing 5
MODIFICATION BULLETIN NO. 1 PAGE 10 OF 11
ISSUED ON: September 15, ’96
DETAILS OF MODIFICATION
Drawing 6
OLD NEW
JAPAN PRODUCTION
MODEL NAME V/Hz DESTINATION
CODE SERIAL NUMBER
Reason for
Parts Catalog Correction
Modification
Parts Catalog
Old P/N New P/N Description Q’ty Used
Index No. Page
1407 4662 1407 4304 IC-EEPROM-BR93LC46A 1→1 127 25
JAPAN PRODUCTION
MODEL NAME V/Hz DESTINATION
CODE SERIAL NUMBER
20
RICOH Modification Bulletin PAGE: 1/1
Model: Skylark Date: 31-Mar-97 No: 4
Modified Article: Lower Unit Frame Prepared by: M.Ishihara
From: QAC 1st Field Information Dept. Checked by: T. Inoue
Reason for Parts catalog correction Vendor change To meet standards
To facilitate assembly To improve reliability ( )
Modification:
Part standardization Other
Old part New part Description Qty Int Page Index Note
number number
------- A1841330 Lower Unit Frame 1 ---- 5 21
Certain plastic parts of the Lower Unit Frame have a possibility of breaking. So the frame
is registered as a service part. The part A1841330 has no component parts (frame only).
21
RICOH Modification Bulletin PAGE: 1/1
Model: Skylark Date: 15-Apr-97 No: 5
Modified Article: Thermofuse Prepared by: M.Ishihara
From: QAC 1st Field Information Dept. Checked by: T. Inoue
Reason for Parts catalog correction Vendor change To meet standards
To facilitate assembly To improve reliability ( )
Modification:
Part standardization Other
Old part New part Description Qty Int Page Index Note
number number
A1844063 A1844210 Thermofuse 1 O/O 17 13
The previous thermofuse has been changed to meet Japanese electrical standards.
To standardize the part, it has been changed. Both the old and new parts can be used
everywhere except Japan.
RICOH Modification Bulletin PAGE: 1/1
Model: Skylark Date: 30-Apr-97 No: 6
Modified Article: Shielding Plate Prepared by: M.Ishihara
From: QAC 1st Field Information Dept. Checked by: T. Inoue
Reason for Parts catalog correction Vendor change To meet standards
To facilitate assembly To improve reliability ( )
Modification:
Part standardization Other
Old part New part Description Qty Int Page Index Note
number number
A1841861 Shielding Plate - 241x22 1→0 24
A1841862 Shielding Plate - 19.5x20 1→0 25
The above two parts were informed by MB No.1 issued on September 15.1996.
However those parts retained vapour in the optics section leading to blurring on copies.
Therefore, those parts were removed from the optics section.
Old part New part Description Qty Int Page Index Note
number number
A1842366 Terminal Cover - BH 0→1 15 34
To cover the bias terminal ( A1842350 ) and the high voltage terminal ( A1842356 ), a
terminal cover ( A1842366 ) has been added.
A1842366
Development Bias
Terminal
A1842366
Terminal Cover
(A1842355)
RICOH Modification Bulletin PAGE: 2/2
Model: Skylark Date: 15-May-97 No: 7
Old part New part Description Qty Int Page Index Note
number number
A1841491 A1841498 Platen Cover Hinge -Left 1→1 ∗ x/x 5 15
A1841492 A1841499 Platen Cover Hinge-Right 1→1 ∗ x/x 5 16
A1841495 Stopper pin 0→2 ∗ 5 22
A1841493 Hinge Lock Pin 2→0 5 19 MB1
A1841494 Metal Plate 2→0 5 20 MB3
To facilitate operation, the platen cover hinges have been modified as shown below.
The new parts are interchangeable as a set. ( When the old hinges are replaced with the
new ones, the stopper pins are needed. )
16
16
19
15
15
22
RICOH Modification Bulletin PAGE: 2/2
Model: Skylark Date: 15-May-97 No: 8
Old part New part Description Qty Int Page Index Note
number number
A1842569 - Paper Guide Mylar 4→0 13 13
- A1842577 Guide Mylar 0→1 13 14
To improve the reliability of paper transportation, the guide mylar shown below has been
added to the paper turn section at the paper tray section instead of the four paper guide
mylars (A1842569).
Old part New part Description Qty Int Page Index Note
number number
- A1901740 Mylar Cushion 0→1 7 32
To prevent 1st scanner vibration, a mylar cushion has been attached to the optics frame
as shown below.
Optics Frame
Modification Bulletin PAGE: 2/2
Model: Skylark Date: 15-Oct-97 No: 10
Old part New part Description Qty Int Page Index Note
number number
A1841498 A1841451 Platen Cover Hinge – Left 1 X/O 5 15 MB8
A1841499 A1841452 Platen Cover Hinge – Right 1 X/O 5 16 MB8
A1841498 A1841499
Ø Ø
A1841451 A1841452
Modification Bulletin PAGE: 2/2
Model: Skylark Date: 31-Oct-97 No: 11
Old part New part Description Qty Int Page Index Note
number number
A1525220 A1845240 Main Switch 1 O/O 21 13
The main switch #A1845240 is available as a service part for Skylark, though the old
switch #A1525220 is available as well.
Modification Bulletin PAGE: 1/1
Model: Skylark Date: 31-Oct-97 No: 13
Modified Article: Fusing Unit Prepared by: M.Ishihara
From: QAC Field Information Dept.
Reason for Parts catalog correction Vendor change To meet standards
To facilitate assembly To improve reliability ( )
Modification:
Part standardization Other
Old part New part Description Qty Int Page Index Note
number number
A1844050 A1844108 Fusing Unit – 120V 1 X/O 17 ∗
A1844051 A1844109 Fusing Unit – 230V 1 X/O 17 ∗
Part numbers for the fusing unit described in the parts catalog were wrong. (# A1844108
and # A1844109 were correct.)
Modification Bulletin PAGE: 1/2
Model: Skylark Date: 31-Oct-97 No: 14
Modified Article: Tray Guide Plate Prepared by: M.Ishihara
From: QAC Field Information Dept.
Reason for Parts catalog correction Vendor change To meet standards
To facilitate assembly To improve reliability ( )
Modification:
Part standardization Other
Old part New part Description Qty Int Page Index Note
number number
- A1841490 Tray Guide Plate 1
To prevent the paper tray from falling down, a tray guide plate has been added under the
paper tray as shown below.
Page 32
These items are assembled or included inside the carton box of the imaging unit, and will
be replaced by the customer.
Modification Bulletin PAGE: 1/1
Model: Skylark Date: 28-Feb-98 No: 16
Modified Article: Parts Catalog Prepared by: J. Kasamoto
From: QAC Field Information Dept.
Reason for Parts catalog correction Vendor change To meet standards
To facilitate assembly To improve reliability ( )
Modification:
Part Standardization Other
The information concerning the “Upper Main Harness” and the “Lower Main Harness” was
not sufficient.
Please correct your parts catalog as follows:
Page 11
- Part change -
Old part New part Description Qty Index
number number
A183 5303 A183 5304 Upper Main Harness (A183) 1 13
- Description change -
Old part Old New Index
number description description
A184 5303 Upper Main Harness (A184) Upper Main Harness (A184) (120V) 13
- Newly added -
Part Description Qty Index
number
A184 5329 Upper Main Harness (A184) (230V) 1 13
Page 21
- Description change -
Part Old New Index
number description description
A184 5302 Lower Main Harness Lower Main Harness (120V) 4
- Newly added -
Part Description Qty Index
number
A183 5329 Lower Main Harness (A183) (230V) 1 4
A184 5328 Lower Main Harness (A184) (230V) 1 4
RICOH Modification Bulletin PAGE: 1/1
Model: Skylark Date: 28-Feb-99 No.: 18
Old part New part Description Qty Int Page Index Note
number number
A1842566 - Paper Feed Guide 3-0 13 9
To improve the reliability of paper feed from the paper tray, a guide mylar (A1842577) has
been added at the paper turn area of the tray. (MB No.9)
Three paper feed guides (A1842566) have been eliminated.
RICOH Modification Bulletin PAGE: 1/2
Model: Skylark Date: 28-Feb-99 No.: 19
Old part New part Description Qty Int Page Index Note
number number
- A1842588 Sensor Bracket 0-1 - 11 23
To prevent the photointerrupter (Index No.17) from coming off, a sensor bracket has been
added under the photointerrupter as shown below. It is used in Skylark2 as well.
23
RICOH Modification Bulletin PAGE: 2/2
Model: Skylark Date: 28-Feb-99 No.: 19
Old part New part Description Q’ty Int Page Index Note
number number
A1841351 A1841359 Lock Release Lever 1-1 X/O 11 19
To strengthen the part, the lock release lever has been changed as shown below.
Old part New part Description Q’ty Int Page Index Note
number number
A1842600 A1842600 Registration Roller 1-1 O/O 19 11
The registration roller was changed in shape as shown below as the vendor was changed.
The part number was not changed and those rollers are interchangeable.
Old part
New part
Modification Bulletin PAGE: 2/2
Model: Skylark Date: 10-Aug-00 No.:MA183022
Due to a vendor change, a 172°C thermofuse will be supplied instead of the 169°C type.
When attaching the new thermofuse, be sure to remove the old decal (169°C type).
Old part New part Description Q’ty Int Page Index Note
number number
A1844210 A2714215 Thermofuse 1-1 O/O 17 13 See
MB
No.5
A1844061 A2714061 Fusing Upper Cover 1-1 O/O 17 10
Modification Bulletin PAGE: 1/1
Model: Skylark Date: 06-Sep-00 No.: MA183024
Due to a vendor change, the following parts were changed. They are interchangeable, so
the old parts can be used as well.
Old part New part Description Q’ty Int Page Index Note
number number
16070663 16071071 Ferrite Core – NFR - 201010 1-1 O/O 21 109 See
MB
No.1
16070892 16071072 Ferrite Core – NFR – 161308 1-1 O/O 21 110 See
MB
No.1
16070576 16071073 Sleeve Core – NF – 80 1-1 O/O 11 103
Modification Bulletin PAGE: 1/1
Model: Skylark Date: 06-Sep-00 No.: MA183025
Old part New part Description Q’ty Int Page Index Note
number number
A1840452 - Caution Decal – Used Toner 1-0 15 7
27 10
- A1840458 Decal – Developer 0-1 15 7
27 10
The caution decal has become obsolete and the contents of the decal have been indicated
on the case directly. A decal for the developer has been added.
A1840458
Modification Bulletin PAGE: 1/1
Model: Skylark Date: 06-Sep-00 No.: MA183026
Old part New part Description Q’ty Int Page Index Note
number number
- A1840494 Decal - Lever 0-1 15 35 New
- A1840495 Decal – IU 0-1 15 36 New
To reduce paper jams caused by operator errors, the following caution decals were
attached to the imaging unit.
A1840494
A1840495
Modification Bulletin PAGE: 1/1
Model: Skylark Date: 14-Sep-00 No.: MA183027
Old part New part Description Q’ty Int Page Index Note
number number
A1841359 A1841369 Lock Release Lever 1-1 X/O 11 19 See
MB.0
20
To increase durability, the lever has been changed from PS plastic ( >PS<CS5) to
ABS plastic (>ABS FR 10+17 <5459W).
The old part is quite durable according to our laboratory tests. However, the new lever is
more durable than the old one.
Modification Bulletin PAGE: 1/1
Model: Skylark Date: 09-Jan-01 No.: MA183028
Old part New part Description Q’ty Int Page Index Note
number number
- A1849505 Start Key 0-1 5 23 New
To comply with a field request, the Start key is available as a service part.
Modification Bulletin PAGE: 1/1
Model: Skylark Date: 15-Jan-04 No.: MA183029
The following parts, which were previously missing, have been added to the Parts Catalog.
Old part New part Description Q’ty Int Page Index Note
number number
- A1843461 Drive Shaft – Toner Bottle 1 - 15 *2
- A1843452 Coupling Shaft – Toner Bottle 1 - 15 *1
- 06216100E Spring Pin – 1.6x10 2 - 15 105