Professional Documents
Culture Documents
Drafting Standards
Paper:
Sketch paper Ideation and concept development.
Vellum Design drawings. ie., Floor plan, RCP, Elevations, Details, etc.
Line Type:
Solid Visible objects, Leader lines and Dimension lines
Hidden ------------ Hidden objects, Objects beyond (above or below)
Center line Indicate center of plan, object (s), etc.
Leader line Connect notes/references to drawing the work is
Break line Indicate a break in the view of a drawing or object
when only a partial view or portion is shown.
Text height:
1/4” (6mm) Titles, Drawing numbers and possibly Subtitles.
1/8” (3mm) General notes, Dimensions, Scale.
Maintain consistent size and location of text throughout drawing(s).
DSGN 2220 Studio III – Residential | Bachelor of Interior Design
School of Engineering & IT | Conestoga College ITAL
Professor Hulme | F12
Elevation number
Titles:
FLOOR PLAN Use architectural lettering (all capitals)
SCALE: ¼” = 1’-0”
Locate title below plan at left side.
Dimensions:
Maintain consistent spacing and placement of dimensions lines throughout drawing and
drawing set. ie., If dimension line is located ½” (12) from object or wall at one location in
the drawing, then all other dimension lines should be placed ½” (12).
Title Block:
Standard Title Block to be used. Details provided in the Studio.