You are on page 1of 1

THERMAX LIMITED

POWER DIVISION, Pune


A Approved (Cleared for manufacturing if applicable)
WILO Mather and Platt Pumps Pvt. Ltd B Approved with comments.
(Cleared for manufacturing subject to incorporation of comments).Revise/Resubmit for approval .
PerformanceCChartReturned with Comments. Resubmit for Review
D Not Approved, Resubmit for Review
Customer THERMAX LIMITED E Retained for InformationLiquid
& Records CW MAKE UP
NOTE: This dwg/ doc has been awarded the status as above. Approval status does
Consultant PDIL Specific
not relieve the vendor of his responsibility for Design, Gravity and Performance
Manufacturing 1
of the Equipment, including conformance to the specification of the contract/ PO
Project RCF, THAL PBL
2016.09.
29
Application ACW PUMP 17:12:38
+05'30'

Speed (RPM) Frequency (HZ) PumpModel SCP-150-390-HA PROCESS PLPD CIVIL Solid Size
ELECTRICAL C&I 0 BY
CHECKED mm

1475 50 Flow 350.0 m3/hr Head 35.0 m Stage 1

Input 39.71 kW NPSHA - Size Pump Nozzle Recommended Pipe

PrimeMover Power 45.0 kW NPSHR 4.4 m Suction (mm) 200 250


Eff 84.00 % Shut Off Head 41 m Discharge (mm) 150 200

Prepared By/Checked By Sanket G Dumbre


Tag Number NA Order No 81072676 / 81263372
Date 19/09/2016

Note : 1. Pump Performance with : ISO-9906-GrII 2. NPSHa should be at least 0.5 m higher than NPSHr
Technical matter is subjected to change without prior notice due to intensive Research & Development activities Reference: SCP 150-390 HA_50_4_A_R01

You might also like