Professional Documents
Culture Documents
RL
PRINT YOUR OWN SECURITY
FEATURES INSIDE THE FILM FOR
LAMINATION AGAINST PAPER &
SYNTHETIC MATERIALS
PETix™ RL can be combined with paper and synthetic films (after technical
approval by AGFA). This film is developed for roll lamination but can be used in
some cases in plate lamination. The inside of the PET film can be printed and
hereafter Agfa will add the adhesion film to create your personalised security film.
1.Typical properties
PROPERTY UNIT VALUE TEST METHOD
Dimensions
µm 140-250
Thickness
mil 5,51 - 9,84
Tolerance % 10
Squareness mm/m < 0,8 Internal Agfa method
Optical
Texture side 1
glossy
(away from core)
Texture side 2
matt
(towards core)
No dust / fibers
Surface Quality No scratches
No contamination
Physical
Density g/cm³ Depends on thickness 23 °C ASTM - D 1505 - 68
Shrinkage % tbd 30 min at 100 °C
2. Application information
PROPERTY UNIT VALUE RECOMMENDATION
Lamination
Lamination temperature
°C min. 104°C insert temp
recommended range
www.agfa.com/petix Looking from front to back during assembly of a stack, a RECTO sheet should always be combined
petix@agfa.com with a VERSO sheet of the same material.
© copyright 2014 by Agfa-Gevaert NV. All rights reserved. AGFA and the Agfa rhombus
are trademarks of Agfa-Gevaert NV & Co KG. All other trademarks are recognized.
All product specifications are subject to change without prior notice.
PETIX RL GB 09102014