Professional Documents
Culture Documents
Air
Classifying
Mill
SALIENT FEATURES
• Modern, Economical, simple.
7
• Grinding and Classifying in one machine wih online
5 1 adjustment.
6 • Dust free Operation.
2 • Steep particle distribution curves.
• High collection efficiency.
4
3 • Low specific energy requirement.
• Wide range of applications.
• Capable of grinding hygroscopic, heat sensitive & explosive
materials in inert gas / closed loop system with dry, chilled
air / gas.
APPLICATION RANGE
5 The direct and fully effective air and material flow in the grinding
and classifying zones, adjustable particle size, cool milling
3
PRODUCT operation and the various options of components mean that
FEED
GRINDPRODUCT + AIR RIECO ACM Mills can be used over a broad spectrum of size
4
1
reduction can be achieved even on materials that are, heat
sensitive or are inclined to cake.
AIR IN GRIND
PRODUCT
DISCHARGE
TEST RIG
RIECO has a government approved R & D facility at Alandi near
Pune. This includes a fully operational 10 ACM plant. Materials
can be readily tested for the grinding performance and the results
obtained can be extrapolated to meet desired throughputs. An
elaborate data bank generated over a period ensures optimal
design.
THE ROTOR ASSEMBLY
This assembly comprise of the following components : the
separator wheel assembly, the rotor disc, bearing housing
and the V-belt pulleys. The complete assembly is secured to
the grinding chamber housing by four retaining bolts. All
bearings are lubricated and are protected against ingress of
ground product and dirt, moisture by means of special
sealing rings.
DRIVES
All driven motors are fixed to the chassis and are easily
accessible, power is transmitted by V-belts. A tachometer is
supplied to indicate the speed and allows operator at a
glance to select the correct speed for any pre-determined
product fineness.
24/48 blades-short to obtain a 24/48 blades-long for maximum 24/48 blades-long tangential for
narrow grain spectrum possible product fineness micro fine particle clssification
Smooth design for abrasive products Notched design for high degree of
and those with tendency to cake. fineness and non caking products.
TECHNICAL DATA
AU VE
RI
BURE
IECO
ISO 9001
TA S
1162/2, Shivajinagar, Behind Observatory, Pune - 411 005 (INDIA) BUREAU VERITAS
Certification UKAS
Phones : 91-20-25535384, 25535215 Fax : 91-20-25533229
QUALITY
1828 MANAGEMENT
008
E-mail : rieco@rieco.com / s_pune@rieco.com Website : www.rieco.com
Regional Offices at :
Mumbai : 14, Nariman Bhavan, 227 Nariman Point, Mumbai - 400 021. (INDIA)
Phones : 022- 2202 6322, 2285 0939 / 40 Fax : 022-2202 5794
Email : sales_mumbai@rieco.com
New Delhi : E-1, Jhandewala Extension, Rani Jhansi Road, (Near Delhi Press), New Delhi - 110 055. (INDIA)
Phones : 011-2362 8116, 2355 4029, Fax : 011-2362 8243
Email : sales_delhi@rieco.com
Kolkata : 7A, Lala Lajpatrai Sarani, Kolkata - 700 020. (INDIA)
Phones : 033-30532006/7, 2283 2007/8 Fax : 033-2283 2004
Email : rieco_kolkata@reliancemail.net
Chennai : No. 31 & 32, 3rd Street, Kamaraja Colony, Kodambakkam, Chennai - 600 024. (INDIA)
Phones : 044-2375 0802, 2372 1274 / 1275, Fax : 044-2372 1274 / 1275
Email : sales_chennai@rieco.com