You are on page 1of 1

Cartridge fitting Notes

www.styli.co.nz

C
B

Instructions:
»Mount the cartridge onto the headshell by the bolts provided, leaving it loose for later adjustment.
»Connect the 4 wires as per the colours marked. »Cut a small hole in this page for the Spindle at ‘A’, place it on your turntable.
»Place the Stylus point on ‘B’ (either but both should be correct). The Cartridge body should be fixed when parallel with the lines ‘C’
»Tighten the bolts Place the needle point on the other set or markings, it should be correct here also.

You might also like