Professional Documents
Culture Documents
Objectives
Part 1: Identify Network Devices
Part 2: Identify Network Media
Background / Scenario
As a member of the networking support staff, you must be able to identify different networking equipment.
You must also understand the function of equipment in the appropriate part of the network. In this lab, you will
have access to network devices and media. You will identify the type and characteristics of the network
equipment and media.
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 3
Lab A - Identifying Network Devices and Cabling
2 GigabitEthernet Ports
2 EHWIC slots
1 Cisco 1941 Router Router 2 CompactFlash slots
1 ISM slot
2 Console ports: USB, RJ-45
Cisco
Capacidad paa 48 puertos disponibles.
2 300 Switch Switch
Capacidad de numero de redes VLAN 256
TP LINK
Cuatro puertos de red
4 WR94IND Router Router Switch Un Puerto WAN
IEEE 811g IEEE 811b
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 3
Lab A - Identifying Network Devices and Cabling
Infrarrojo
Reflection
After you have identified the network equipment, where would you find more information about the
equipment?
Se puede investigar más información, mediante las páginas de las empresas fabricantes de los distintos
medios de red.
© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 3 of 3