Professional Documents
Culture Documents
Contents
5.6 Automatic rectification
1. Introduction:……………………………………………………………………………………
( 1)Close MC1 start switch and press the (3) Press button,make the “green”
1. 1 Overview ………………………………………………………………………………………… panel “SET” button once,the red indicator indicator above light to enter “automatic ”
light,so controller enter“normal ”working working state,start automatic rectification.
1. 2 Features………………………………………………………………… … … … … … … … … …
stage,LED displays “- -”. (4) Observation the automatic rectification ,
1. 3 Panel and button ………………………………………………………………………
( 2) Press button, make the red indicator if the edges of coil does not shake under
above light and controller enter “manual” light spod,but move to the other side,you
2.Shape and size of installation …………………………………………………………
working state,press 、 key to move can press button to change motor
3.Electric installation and wiring …………………………… … … … … … … … … … … promote institutions make coil edges under direction;According to the working situation ,
the light spot. you can enter “Setting” working state
3. 1 Installation of photoelectric eyes …………………………………………………………
adjust controller action sensitivity.
3. 2 Wiring ………………………………………………………………………………………………