You are on page 1of 98

CABLES AND WIRES

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 41
3
CABLE AND WIRES

PVC GENERAL PURPOSE WIRE 1kV


House Wire 600/1000V
Cable Description
High conductivity annealed stranded copper
conductors to SANS 1411 Part 1. Insulated with PVC
and skin coloured in plain colours to SANS 1411 Part 2.
Cable is manufactured to SANS 1507 Part 3.
Properties
Installation Information
Specifications : SANS 1507-3
For the wiring of Industrial Buildings, Housing, Control
Temperature Range : -10°C to 70°C
Panels and Light Fittings.
Voltage Rating : 600/1000V
Core Identification : Complete range of colours
Technical Data Packaging : 100m shrink-wrapped /500m reels

Conductor
Approximate Cable Approximate Cable
Cable Size Nominal Stranding Diameter
Current Rating Resistance 1OI Volt Drop Mass
No. x Diameter at 20ºC Maximum

(mm2) (mm) (A) (Ω/km) (mV/A/m) (kg/100m)


600/1000 V
1 7/0,42 3,0 17 18,1 43 1,7

1,5 7/0,53 3,3 21 12,1 29 2,2

2,5 7/0,66 3,6 27 7,41 18 3,2

4 7/0,86 4,5 36 4,61 11 5,2

6 7/1,04 5,0 45 3,08 7,4 7,0

10 7/1,35 6,0 61 1,83 4,4 11,1

16 7/1,67 6,9 78 1,15 2,8 16,7

25 19/1,38 8,4 104 0,73 1,7 25,6

35 19/1,62 9,5 125 0,52 1,3 34,7

50 19/1,88 11,3 149 0,39 0,93 47,2

70 19/2,28 12,6 190 0,27 0,65 66,1

95 19/2,50 15,8 238 0,19 0,48 97,6

120 37/2,03 17,5 272 0,15 0,38 120,0

150 37/2,28 19,7 308 0,12 0,32 147,0

185 37/2,50 22,0 350 0,10 0,26 182,2

Note:
• Rating calculated for 1kV cable.
• Rating based on two touching cables installed in a duct.
• Assumed ambient air temperature is 30°C.
• Assumed maximum conductor temperature is 70°C.
• Compacted Conductors.

Code Table Product Code

Cable Size Colours


Green
(mm2) Black Blue Brown Grey Mustard Orange Pink Purple Red White Yellow
Yellow
1 F232 F233 F234 F235 F236 - F237 F238 F239 F240 F241 F242
1,5 F245 F246 F247 F249 F250 F251 F252 F253 F254 F256 F258 F259
2,5 F262 F263 F264 F266 F267 - F268 F269 F270 F272 F274 F275
4 F278 F279 F280 F282 - - F283 F284 F285 F287 F289 F290
6 F293 F294 - F296 - - - - - F298 F300 -
10 F303 F304 - F306 - - - - - F308 F310 -
16 F313 F314 - F316 - F2789 - - - F318 F320 F321
25 F323 F324 - F326 - - - - - F327 F328 -
35 F330 F331 - F333 - - - - - F335 F337 -
50 F340 F341 - F343 - - - - - F344 F346 -
70 F349 F350 - F352 - - - - - F354 F355 -
95 F356 F1315 - F358 - - - - - F359 F1316 -
120 F360 - - F361 - - - - - F1317 - -
150 - - - F362 - - - - - F363 - -
185 F364 - - F365 - - - - - - - -

For items marked with a dash (-) please enquire at branch or reference website.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
42
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

SURFIX® CABLE
300/500V
Cable Description
Copper conductors to SANS 1411 Part 1, PVC insulated
to SANS 1411 Part 2 , laid up with a bare tinned
copper earth wire in contact with a longitudinal
aluminium/polyethylene laminate, UV stable PVC
sheathed to SANS 1411 Part 2.

Installation Information Properties


Complies with SANS 10142 “Code of Practice for wiring UV Stable
of Premises” Section 6: Specifications : SANS 1507-2
• Surface wiring Temperature Range : -10°C to 70°C
• Under plaster wiring Voltage Rating : 300/500V
• Wiring in hollow walls Sheath Identification : White or Black
• Wiring in roof spaces Core Identification : 2 Core - Red & Black, 3 Core - Red, Yellow, Blue, 4 Core - Red, Yellow,
Blue, Black
Note: The cable shall not be buried direct in concrete Packaging : 100m shrink-wrapped coils
or in screed. Joints in the wiring should be in boxes only. : Available on 500 and 1000m wooden drums on request
(depending on size)
Technical Data

Electrical Properties Physical Properties

Cable Size Conductor


Resistance Approximate
1 Sec Short Approximate
(dc at 20ºC) Current Rating Volt Drop Overall
Circuit Rating Cable Mass
Diameter
Phase Earth Phase Earth

(mm2) (Ω/km) (A) (mV/A/m) (kA) (mm) (kg/100m)

2 Core

1,5 1 12,1 18,2 17 29 0,14 7,8 10,6

2,5 1,5 7,41 12,2 23 18 0,24 8,8 14,4

4 1,5 4,61 12,2 30 11 0,38 10,1 20,8

6 2,5 3,08 7,56 38 7,3 0,58 11,3 25,7


3 Core

1,5 1 12,1 18,2 15 25 0,14 8,0 10,9

2,5 1,5 7,41 12,2 20 15 0,24 9,3 15,7

4 1,5 4,61 12,2 27 9,5 0,38 10,8 21,0

6 2,5 3,08 7,56 34 6,4 0,58 12,0 28,7

4 Core

1,5 1 12,1 18,2 15 25 0,14 8,7 13,3

2,5 1,5 7,41 12,2 20 15 0,24 10,2 19,3

4 1,5 4,61 12,2 27 9,5 0,38 11,8 26,5

6 2,5 3,08 7,56 34 6,4 0,58 12,8 33,5

Note:
• Conductors larger than 2,5mm² are usually stranded.
• Maximum conductor temperature 70°C, and installed as per installation Method 3 of SANS 10142-1.
• 2 Core - Volt drop is phase to Neutral (i.e. Single-phase).
• 3 and 4 Core - Volt drop is phase-to-phase. (i.e. Three phase AC).

Code Table Product Code

Colours
Cable Size
Black White

(mm2) 2 Core 3 Core 4 Core 2 Core 3 Core 4 Core


1,5 F598 F603 F608 F600 F605 F609
2,5 F614 F619 F623 F616 F620 F624
4 F627 F631 F635 F628 F632 F636
6 F639 F641 F643 F640 F642 F644
10 F610 - - F611 - -

Note:
• Surfix is a trademark of Aberdare Cables, a member of the Powertech Group.
• Other colours available on request.
• Minimum quantities apply.
For items marked with a dash (-) please enquire at branch or reference website.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 43
3
CABLE AND WIRES

FLAT TWIN AND EARTH CABLE


300/500V
Cable Description
Copper conductors to SANS 1411 Part 1, PVC insulated
to SANS 1411 Part 2, laid up with a bare copper
earth-continuity-conductor between them, UV stable
PVC sheathed to SANS 1411 Part 2.

Installation Information Properties


Complies with SANS 10142/2001 “Code of Practice for Specifications : SANS 1507-2
the wiring of Premises” Section 6, Clause 6.3.6: Temperature Range : -10°C to 70°C
• Surface wiring Voltage Rating : 300/500V
• Under plaster wiring Sheath Identification : White or Black
• Roof access wiring Core Identification : 2 Core - Red & Black, 3 Core - Red, Yellow, Blue
• Wiring in hollow walls Packaging : 100m shrink-wrapped coils

Note: The cable should not be buried direct in concrete


or in screed. Joints in the wiring should be in boxes only.

Technical Data

Electrical Properties Physical Properties

Cable Size Conductor


Resistance Approximate
1 Sec Short Approximate
(dc at 20ºC) Current Rating Volt Drop Overall
Circuit Rating Cable Mass
Diameter
Phase Earth Phase Earth

(mm )
2
(Ω/km) (A) (mV/A/m) (kA) (mm) (kg/100m)
2 Core
1,5 1 12,1 18,1 17 29 0,14 8,7 x 4,7 8,7
2,5 1,5 7,4 12,1 23 18 0,24 10,3 x 5,5 12,8
4 1,5 4,61 12,1 30 11 0,38 11,9 x 6,4 17,5
6 2,5 3,08 7,41 38 7,3 0,58 13,4 x 7,0 23,3
10 4 1,83 4,61 52 4,4 0,96 16,5 x 8,3 36,1

3 Core (Trip)
1 1 18,2 18,2 12 38 0,11 4,4 x 10,4 8,9
1,5 1 12,1 18,2 15 25 0,14 4,8 x 10,5 9,9
2,5 1,5 7,4 12,2 20 15 0,24 5,5 x 12,3 14,1

Note:
• Conductors larger than 2,5mm² are usually stranded.
• Maximum conductor temperature 70°C, and installed as per installation Method 3 of SANS 10142-1.
• 2 Core - Volt drop is phase to Neutral (i.e. Single-phase).
• 3 and 4 Core - Volt drop is phase-to-phase. (i.e. Three phase AC).

Code Table Product Code

Colours
Cable Size
Black White

(mm ) 2
2 Core 3 Core 2 Core 3 Core
1 F663 - F665 F659
1,5 F667 - F669 F660
2,5 F671 - F672 F661
4 F674 - F675 -

6 - - F676 -

10 F678 - F679 -

16 - - F681 -

For items marked with a dash (-) please enquire at branch or reference website.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
44
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

CABTYRE CABLE
Flexible Wiring
300/300V and 300/500V
Cable Description
High conductivity bunched plain flexible copper
conductors to SANS 1411 Part 1. Insulated and colour Properties
coded with general purpose flexible grade PVC to Specifications : SANS 1574
SANS 1411 Part 2. Cores are twisted together and Temperature Range : -10°C to 70°C
sheathed with a flexible grade PVC. Voltage Rating : Light Duty (LD) 300/300V and Normal Duty (ND) 300/500V
Sheath Identification : White, Black or Grey
Installation Information Core Identification : 2 Core - Blue & Brown, 3 Core - Blue, Brown & Yellow/Green,
For supplying power to all types of electrical, domestic 4 Core - Blue, Brown, Black & Yellow/Green, 5 Core - Blue, Black,
and industrial appliances and equipment such as: Brown, Yellow/Green, Violet, 7 Core - Blue, Brown, Black,Yellow/
• Power Tools • Extension Leads Green, Violet, Pink, Orange
• Electric Lawnmowers • Multi Plug Extensions Packaging : 100m shrink-wrapped coils/500m and 1000m lengths available
• Kitchen Appliances • Small Industrial Machinery on request

Technical Data
Approximate Current
Conductor Resistance Volt Drop Approximate
Cable Size Number of Nominal Stranding Overall Rating
at 20ºC Maximum Cable Mass
Cores No. x diameter Diameter
1OI 3OI 1OI 3OI
(mm2) (mm) (Ω/km) (A) (mV/A/m) (kg/100m)
Light Duty 300/300V
2 5,2 3,9
3 5,5 4,7
0,5 15/0,2 39 3 3 93 80
4 6,0 5,5
5 6,6 6,7
0,75 3 23/0,2 6,1 26 6 6 62 54 5,5

Normal Duty 300/500V


2 6,2 5,2
3 7,0 6,7
0,75 4 23/0,2 7,2 26 6 6 62 54 7,8
5 8,2 9,9
7 8,7 12,6
2 6,6 6,3
3 7,0 7,6
1 4 30/0,2 8,0 19,5 10 10 46 40 9,8
5 8,6 11,6
7 9,3 14,8
2 7,8 8,4
3 8,3 10,8
1,5 4 44/0,2 9,3 13,3 16 16 32 27 13,5
5 10,0 16,2
7 10,9 20,7
2 9,6 13,5
3 10,3 16,8
2,5 4 72/0,2 11,9 7,98 25 20 19 16 21,8
5 12,2 24,2
7 13,2 31,3
2 11,0 19,0
3 11,4 25,0
4 112/0,2 4,96 32 25 12 10
4 13,5 32,0
5 14,1 33,9

Note: Current Rating based on ambient temperature of 30ºC. Maximum Conductor temperature is 70°C.

Code Table Product Code


Colours
Cable Size
Black Grey White
(mm2) 2 Core 3 Core 4 Core 5 Core 7 Core 2 Core 3 Core 4 Core 5 Core 7 Core 2 Core 3 Core 4 Core 5 Core 7 Core
0,5 F83 F87 F91 F93 - - F88 - - - F84 F89 F92 F1519 -
0,75 F95 F100 F106 F108 F110 F3266 F101 - - - F96 F107 F107 F109 -
1 F113 F119 F123 F126 F128 F114 F120 F1521 - - F115 F121 F124 F1522 F1523
1,5 F131 F137 F143 F148 F153 - F138 F1525 F149 - F132 F139 F144 F150 F154
2,5 F155 F161 F166 F171 F173 - F162 F167 - - F156 F163 F168 F172 F174
4 F175 F176 F178 F181 F182 - F1530 F179 - - F1529 F177 F180 - -

For items marked with a dash (-) please enquire at branch or reference website.
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 45
3
CABLE AND WIRES

AUDIO CORD CABLE (RIPCORD)


Flexible Wiring
Cable Description
High conductivity bunched plain flexible copper
conductors to SANS 1411 Part 1. 2 Core insulated with
general purpose flexible grade PVC to SANS 1411
Part 2.

Installation Information Packaging : 100m shrink-wrapped coils


For the wiring of all types of:
• Intercoms
• Alarm Systems
• Audio and Visual Equipment

Technical Data

Conductor
Approximate Approximate
Cable Size Nominal Stranding Cable Diameter
Current Rating Resistance 1OI Volt Drop Cable Mass
No. x Diameter at 20ºC Maximum
(mm2) (mm) (A) (Ω/km) (mV/A/m) (kg/100m)
0,2 7/0,2 1,6 x 3,2 1 92 248 0,95
0,4 11/0,2 2,1 x 4,2 2 48,8 98 1,6
0,5 15/0,2 2,5 x 5,0 3 39 93 2,2
0,75 23/0,2 2,7 x 5,4 6 26 62 2,8
1,00 30/0,2 2,9 x 5,8 10 19,5 46 3,6
1,5 44/0,2 3,2 x 6,4 16 13,3 32 4,3
2,5 72/0,2 3,9 x 7,9 25 7,98 19 6,9
4 112/0,2 4,7 x 9,4 32 4,96 12 10,9

Note:
• Assumed ambient air temperature is 30°C.
• Assumed maximum conductor temperature is 70°C.

Code Table Product Code

Cable Size Colours

(mm2) Black Brown Clear Grey Red White


Black
0,2 - F1322 F1321 - - F520
0,5 F524 F525 F526 F1326 F528 F527
0,75 F530 F1327 F531 F1328 - F532
1 F533 F534 F535 - - F536
1,5 F537 - - - F538 F539
2,5 - - - - F540 F1330
4 - - - - F541 -

For items marked with a dash (-) please enquire at branch or reference website.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
46
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

SINGLE CORE FLEXIBLE CABLE


Single Core Flexible Cable
300/500V and 600/1000V
Cable Description
High conductivity bunched plain flexible copper
conductors to SANS 1411 Part 1. Insulated with
general purpose flexible grade PVC in all colours to
SANS 1411 Part 2.

Installation Information Properties


For the wiring of all types of: Specifications : SANS 1574-3
• Control panels Temperature Range : -10°C to 70°C
• Light fittings Voltage Rating : 300 / 500V and 600/1000V
• Communication panels Core Identification : Blue, Black, Brown, Yellow/Green, Orange, Pink, Violet, Grey, White &
• Appliances Red
Packaging : 100m shrink wrapped coils
: 500m lengths available on request
Technical Data

Conductor
Approximate Approximate
Cable Size Nominal Stranding Cable Diameter
Current Rating Resistance 1OI Volt Drop Cable Mass
No. x Diameter at 20ºC Maximum
(mm2) (mm) (A) (Ω/km) (mV/A/m) (kg/100m)
600/1000V
0,5 15/0,2 2,6 11 39 93,3 1,1
0,75 23/0,2 2,8 14 26 62,2 1,3
1 30/0,2 3,0 16 19,5 46,7 1,6
1,5 44/0,2 3,3 20 13,3 31,8 2,2
2,5 72/0,2 3,7 26 7,98 19,1 3,1
4 112/0,2 4,8 35 4,95 11,8 4,9
6 175/0,2 5,3 43 3,30 7,9 7,3
10 294/0,2 9,1 58 1,91 4,6 11,1
16 462/0,2 10,0 75 1,21 2,9 16,7
25 721/0,21 12,7 100 0,78 1,9 27,1
35 1026/0,21 14,5 122 0,55 1,3 35,8

Note:
• Assumed ambient air temperature is 30°C.
• Assumed maximum conductor temperature is 70°C.
• Rating for 2 wires only.

Code Table Product Code


Cable Size Colours
(mm2) Black Blue Brown Green Grey Orange Pink Violet Red White Yellow
Yellow
0,5 F433 F434 F435 F436 F437 F440 F439 F442 F441 F443 F444
0,75 F445 F446 F447 F448 F449 F451 F450 F453 F452 F454 F455
1 F456 F457 F458 F459 F461 F463 F462 F465 F464 F466 F467
1,5 F468 F469 F470 F471 F472 F474 F473 F476 F475 F477 F478
2,5 F489 F490 F491 F492 F493 F1346 F1343 F1345 F494 F495 F496
4 F497 F498 F499 F500 F501 F1348 - F1347 F502 F503 F3426
6 F504 F505 F506 F507 F508 - - - F509 - F510
10 F479 F480 - F481 - - - - F482 F483 -
16 F484 F485 - F486 - - - - F487 F488 -
25 F1350 F1351 - 1353 - - - - F1349 F1352 -

For items marked with a dash (-) please enquire at branch or reference website.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 47
3
CABLE AND WIRES

POWER PANEL FLEX CABLE


300/500V and 600/1000V
Cable Description
Single core flexible copper conductors to SANS 1411
Part 1, Insulated with general purpose flexible grade
PVC and sheathed with a flexible grade waterproof
PVC/Nitrile.

Installation Information Properties


A flexible power cable where flexibility is needed in Specifications : SANS 1574-3
equipment such as: Temperature Range : -10°C to 70°C
• LV transformer connections • Motor control centres Voltage Rating : 300/500 V and 600/1000V
• General wiring applications • Distribution boards Core Identification : Red, Black, Blue, Yellow, Green and Grey
Packaging : 100m shrink-wrapped coils
: 500m lengths available on request
Technical Data

Approximate Continuous
Approximate Impedance Approximate Volt Drop Approximate
Conductor Size Conductor Current Rating
Cable Diameter at 70°C Cable Mass
Diameter (mV/A/m) (A)
(mm2) (mm) (Ω/km) 1OI 3OI 1OI 3OI (kg/100m)
16 5,2 10,8 1 460 2,8 2,4 76 64 23,00
25 7,1 13,5 0,933 1,7 1,5 104 88 31,50
35 8,5 15,3 0,663 1,3 1,1 125 106 42,50
50 10,4 18,4 0,462 0,9 0,8 148 126 57,50
70 11,6 21,2 0,326 0,7 0,6 187 159 76,00
95 14,1 24,1 0,247 0,5 0,4 232 198 101,00
120 15,6 25,6 0,193 0,4 0,4 265 226 129,00
150 17,30 27,7 0,16 0,3 0,3 299 255 159,00
185 20,00 30,8 0,14 0,3 0,3 343 292 189,00

Note:
• Current ratings are based on cable installed in a cubicle, and may vary depending on other applications.
• Assumed ambient air temperature is 30°C.
• Maximum conductor temperature is 70°C.
• Derating of maximum current for other ambient temperatures - use rating factor X as given below:

Ambient temperature, ºC : 25 | 30 | 35 | 40 | 45
Rating factor, X : 1,04 | 1,00 | 0,95 | 0,91 | 0,85
Fault rating : 115A/mm² (1 Second)

Code Table
Cable Size
Colours Product Code
(mm2)
16 Green F2815
25 Blue F2816
35 Grey F2817
50 Red F2818
70 Brown F2819
95 Yellow F2820
120 Black F2821
150 Black F2822

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
48
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

SILICONE CABTYRE CABLE


Flexible Cable
300/500V
Cable Description
High conductivity tinned stranded, flexible copper
conductors to SANS 1411 Part 1. Insulated with
Silicone Rubber Type RD7 and sheathed with Silicone Properties
Rubber Type RS8 to SANS 1574 Part 4 Type R7, H05SS-F. Specification : SANS 1574-4 Pt4
Temperature : -50°C to 150°C (Capable of current rating at 180°C if there are no
limits imposed by environmental conditions)
Installation Information Voltage Rating : 300/500V
For the wiring of all types of: Core Identification : 3 Core - Blue, Brown and Yellow/Green,
• Stoves 4 Core - Blue, Brown, Black and Yellow/Green
• Electrical Motors and Pumps : Insulation and sheath is halogen free and has a low smoke emission
• Fluorescent Lights : Limiting Oxygen Index is 24%
• All other types of High Temperature Appliances Packaging : 100m shrink - wrapped coils

Technical Data

Conductor AC
Nominal Stranding Approximate Approximate
Cable Size Resistance at Current Rating
Number of Cores No. x diameter Cable Diameter Cable Mass
150°C
(mm2) (kg/km) (mm) (Ω/km) (A) (kg/km)
0,75 3 24/0,2 7,6 40,3 17 72
1 3 32/0,2 9,9 30,2 21 127
3 10,8 135
1,5 30/0,25 20,7 26
4 10,6 160
3 11,6 192
2,5 50/0,25 12,4 36
4 11,8 237
3 13,5 283
4 56/0,3 7,7 56
4 14,8 345

Note:
• Assumed ambient temperature is 80°C.
• Maximum Conductor temperature is 150°C.
• Derating of Current Rating for other Ambient Temperatures.

Ambient Temperature, °C : 40 | 60 | 80 | 100 | 120 | 140 | 160


Rating Factor, X : 1,22 | 1,12 | 1 | 0,87 | 0,73 | 0,57 | 0,37

Code Table Product Code


Colour
Cable Size
RED
(mm2) Core 3 Core 4
0,75 F2261 F1270
1,00 F3342 F9416
1,50 F185 F2265
2,50 F188 F2266
4,00 F1485 -

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 49
3
CABLE AND WIRES

SILICONE SINGLE CORE CABLE


Flexible Cable
300/500V and 600/1000V
Cable Description
High conductivity tinned stranded, flexible copper
conductors to SANS 1411 Part 1. Insulated with
Properties
Silicone Rubber Type RD7 to SABS 1574 Part 4, H05SS-F
Specification : SANS 1574 Pt4
& HIS-F in various colours.
Temperature : -50°C to 150°C (Capable of current rating at 180°C if there are no limits
imposed by environmental conditions)
Installation Information
Voltage Rating : 300/500V (0,05mm2 - 16mm2) and 600/1000V (0,5mm2 - 95mm2)
For the wiring of all types of:
Core Identification : Red, Black, Blue, Brown, Green/Yellow and White (Other colours available
• Control Panels
on request)
• Appliances
: Insulation is halogen free and has a low smoke emission. Limiting
• Light Fittings
Oxygen Index is 24%
• All High Temperature Applications
Packaging : Shrink - wrapped
- Coils 100m 0,5 - 35mm2
Technical Data - Reels 100m 50 mm2

Approximate Conductor AC Current Rating


Approximate Cable Mass
Cable Size Nominal Cable Diameter Resistance Single Cable Cable in Trefoil
Stranding
No. x diameter 300/500V 600/1000V 180°C 180°C 300/500V 600/1000V
(mm ) 2
(mm) (Ω/km) (A) (kg/km)
0,5 16/0,2 2,2 2,6 65,3 21 13 8,8 10,7
0,75 24/0,2 2,4 2,8 43,5 26 17 11,7 13,4
1 32/0,2 2,5 3,0 32,6 30 19 14,3 18,1
1,5 30/0,25 3,2 3,3 22,3 37 24 22,4 23,9
2,5 50/0,25 3,9 3,7 13,4 49 31 34,7 37,4
4 56/0,3 4,7 4,8 8,29 65 42 52,4 54,4
6 81/0,3 5,2 5,3 5,52 81 52 71,2 75,2
10 77/0,4 6,6 6,3 3,18 112 72 117,8 118,5
16 125/0,4 7,6 7,2 2,02 143 92 180,7 180,7
25 184/0,4 9,5 1,29 190 124 280
35 267/0,4 10,9 0,92 230 151 391
50 378/0,4 N/A 13,2 0,64 282 186 N/A 551
70 341/0,5 14,4 0,45 352 234 750
95 456/0,5 17,3 0,34 423 285 1010

Note:
• Capable of continuous current rating at 180°C and 250°C if there are no limits imposed by environmental conditions.
• Ambient temperature is 80°C.
• Maximum Conductor temperature is 150°C.
• Derating of Current Rating for other Ambient Temperatures.

Ambient Temperature, °C : 40 | 60 | 80 | 100 | 120 | 140 | 160


Rating Factor, X : 1,22 | 1,12 | 1 | 0,87 | 0,73 | 0,57 | 0,37

Code Table Colours

Cable Size Black Blue Brown Green Grey Orange Red Violet White
(mm2) Product Code
0,5 F1256 F1257 - F1258 - - F1259 - F1260
0,75 F1261 F1262 F1263 F1264 F1265 - F1266 - F1267
1 F2468 F2469 F1460 F1461 F1462 - F2467 - F1463
1,5 F549 F551 F552 F1110 F555 - F557 F1272 F558
2,5 F559 F561 F562 F1112 F565 F1467 F566 F1468 F2474
4 F569 F570 - F916 F1482 - F572 F1483 F573
6 F574 F575 - F1491 F1492 - F576 F1493 F577
10 F578 F1276 - F1277 F1278 - F579 F1279 F1449
16 F1454 F1455 - - F1456 - F1457 - F1458
25 F1474 - - - F1475 - F1476 - -

35 F1478 - - - - - F1479 - -

50 F1487 - - - - - F1488 - -

70 F1535 - - - - - F1536 - -

95 F1556 - - - - - F1557 - -

For items marked with a dash (-) please enquire at branch or reference website.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
50
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

SUBMERSIBLE PUMP CABLE


3 and 4 Core
600/1000V
Cable Description
High conductivity bunch plain flexible copper
conductors to SANS 1411 Part 1. Cores insulated and
bedded with Flexible PVC Grade. Final protection is
given by a flexible PVC outer sheath.

Installation Information Properties


Power supply of mobile and portable submersible Specifications : SANS 1574
pumps as used in: Temperature Range : -10°C to 70°C
• Quarries Insulation & Sheath : Flexible grade waterproof PVC
• Farms Voltage Rating : 600/1000V
• Cleaning and Sewerage extraction plants Sheath Identification : 3 Core - Blue, 4 Core - Green
• De-watering Core Identification : 3 Core - Red, Yellow, Blue, 4 Core - Red, Yellow, Blue, Black
• Boreholes Packaging : Available on 500m wooden drums

Technical Data

Volt Drop
Minimum Bending Approximate Conductor Resistance Approximate
Cable Size Current Rating
Radius Cable Diameter at 20ºC Maximum Cable Mass
1OI 3OI

(mm2) (mm) (mm) (A) (Ω/km) (mV/A/m) (kg/m)


3 Core (Blue)
1,5 x 3 82 10,2 15 13,3 29 25 0,15
2,5 x 3 94 11,7 20 7,98 17 15 0,2
4x3 108 13,5 30 4,96 12 9,5 0,3
6x3 121 15,1 35 3,30 7,3 6,4 0,5
10 x 3 141 17,6 50 1,91 4,3 3,8 0,6
16 x 3 161 20,1 65 1,21 2,8 2,4 0,8
4 Core (Green)
1,5 x 4 89 11,2 15 13,3 29 25 0,2
2,5 x 4 102 12,8 20 7,98 17 15 0,25
4x4 116 14,6 30 4,96 12 9,5 0,35
6x4 132 16,5 35 3,30 7,3 6,4 0,5
10 x 4 153 19,2 50 1,91 4,3 3,8 0,7
16 x 4 176 22,0 65 1,21 2,8 2,4 1

Note:
• Assumed ambient air temperature is 30°C.
• Assumed maximum conductor temperature is 70°C.

Code Table Product Code

Colours
Cable Size
Blue Green
(mm2) 3 Core 4 Core
1,5 x 3 F1510 -

1,5 x 4 F1512 -

2,5 x 3 F584 -

2,5 x 4 F586 F1509


4x3 F588 -

4x4 F590 F1163


6x3 F1514 -

6x4 F7922 F1515


10 x 3 F1516 -

10 x 4 - F3333
16 x 3 F1517 -

For items marked with a dash (-) please enquire at branch or reference website.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 51
3
CABLE AND WIRES

NITRILE TRAILING CABLE


Flexible PVC - 4 Core
600/1000V
Cable Description
High conductivity bunch plain flexible copper conduc-
tors to SANS 1411 Part 1. Cores insulated and bedded
with Flexible PVC. Flexible Grade PVC / Nitrile outer
sheath.

Installation Information Properties


• Power supply of mobile and stationary industrial Specifications : SANS 1574
machinery. Temperature Range : -10°C to 70°C
• Applications that require medium duty abrasion and Voltage Rating : 600/1000V
where oil and water resistance is required. Sheath Identification : PVC/Nitrile - Orange
Core Identification : Red, Yellow, Blue, Black
Packaging : Available on 500m wooden drums
Technical Data
Approximate Conductor Resistance Approximate
Cable Size
Overall Diameter
Current Rating
at 20°C Maximum 1OI Volt Drop Cable Mass Product Code
(mm2) (mm) (A) (Ω/km) (mV/A/m) (kg/m)
1,5 x 4 11 15 13,3 25 0,2 F3267
2,5 x 4 13 20 7,98 15 0,3 F653
4x4 15 30 4,96 9,5 0,4 F654
6x4 17 35 3,30 6,4 0,5 F655
10 x 4 20 50 1,91 3,8 0,7 F656
16 x 4 23 65 1,21 2,4 1 F657
25 x 4 26,2 95 0,78 0,87 1,4 F658

Note:
• Assumed ambient air temperature is 30°C.
• Assumed maximum conductor temperature is 70°C.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
52
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

GENERAL WELDING CABLE


EPM/CM or EPM/CR
100V
Cable Description
Single core flexible copper conductors to SANS 1411
Part 1, EPM (Ethylene-propylene monomer) insulated,
CM (Chloronated Polyethylene) or CR
(Polychloropene) sheathed, heavy duty welding
cables.
Properties
Installation Information
Specification : SANS 1576
Heavy duty welding for:
Voltage Rating :100V AC or DC to earth for welding applications
Indoor and outdoor electric welding equipment.
Core Identification : EPM/CM - Outer CM sheath is coloured
: EPM/CP - EPM insulation is coloured and CR sheath is black
Technical Data Packaging : 100m shrink - wrapped coils

Physical Properties Conductor Dimensions


Maximum
Maximum Resistance of Nominal Approximate Approximate
Conductor Approximate Cable Mass
Diameter Untinned Thickness of Overall
Colour Size Diameter
of Wires Conductor at Insulation Diameter
20°C
(mm2) (mm) (Ω/km) (mm) (kg/m)
Green 16 0,31 5,2 1,210 2,0 9,2 0,25
Blue 25 0,31 7,1 0,780 2,0 11,1 0,35
Grey 35 0,31 8,5 0,554 2,0 12,5 0,45
Red 50 0,31 10,4 0,386 2,2 14,8 0,60
Brown 70 0,31 11,6 0,272 2,4 16,4 0,75
Yellow 95 0,31 14,1 0,206 2,6 19,3 1,10
Black 120 0,51 15,6 0,161 2,8 21,2 1,40

Electrical Properties Class of Welding


Automatic Manual DC
Very
Voltage
Size Semi-automatic Intermittent
Drop
Maximum Current Rating (A) for Duty Cycles of:
(mm2) 100% 85% 60% 30% 20% mV/A/m
16 131 134 142 172 199 1,6
25 177 182 197 246 289 1,0
35 220 229 252 322 380 0,8
50 280 293 327 426 507 0,6
70 346 364 411 546 654 0,5
95 422 446 508 681 819 0,4
120 493 523 599 809 976 0,3

Note:
• Assumed ambient air temperature is 30°C.
• Assumed maximum conductor temperature is 85°C.
• Assumed duty cycle period 5 minutes.
• Derating of maximum current for other ambient temperatures.
use rating factor X as given below:
Ambient Temperature, °C : 25 | 30 | 35 | 40 | 45
Rating Factor, X : 1,04 | 1,00 | 0,95 | 0.91 | 0,85

Code Table
Cable Size
Colours Product Code
(mm2)
16 Green F692
25 Blue F693
35 Grey F694
50 Red F696
70 Brown F697
95 Yellow F698
120 Black F2464
150 Black F2465

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 53
3
CABLE AND WIRES

HO7RN-F FLEXIBLE GENERAL PURPOSE


TRAILING CABLE
Cable Construction
Flexible copper conductors (Class 5 Annealed Copper Conductors), EPR based rubber insulated, cores laid up and Neoprene Rubber sheathed.

Application
This cable is suitable for use in dry, humid or wet environments and in open air. This cable is suitable for medium mechanical stress, in workshops and
general industry. It is mostly used on industrial machinery, however is also suitable for use on home tools, electric motors and portable generators. HO7RN-F
cable is highly suitable as a general purpose cable for temporary power supply, but also for use when installing cable in limited space or for use with small
bending radius.

Neoprene (CR) provides many of the attributes of natural rubber in jacketing but it does offer significantly better heat, ozone-corona, weather, chemical, oil
and flame resistance. The mechanical characteristics of Neoprene makes it highly suited to a diverse range of applications including jacketing for all types
of heavy duty and extra-heavy-duty mining cables.
Max continuous operating conductor temperature
in normal use:
+60ºC (in every case of mobile installation)
+85ºC (fixed protected installation)
+200ºC (in short circuit)

Permissible current rating is measured for an ambient


temperature of 30ºC and a maximum operating and
conductor temperature of 85ºC.

Single Core HO7RN-F


300/500V

Current
Approximate Nominal Outer Resistance
Size Cable Weight Carrying Capacity Product
Volt Drop mV/A/m Diameter (Untinned)
(Air at 30º) Code
(mm2) 1OI 3OI (mm) (kg/km) Ω/km (A)
1,5 23,30 20,18 5,90 50 13,3000 23 -
2,5 14,00 12,12 6,50 65 7,9800 32 -
4 8,70 7,53 7,40 89 4,9500 43 -
6 5,90 5,11 8,10 115 3,3000 56 -
10 3,40 2,94 10,40 190 1,9100 77 -
16 2,20 1,91 11,62 259 1,2100 102 F1448
25 1,40 1,21 13,74 375 0,7800 136 F1499
35 1,04 0,90 15,35 492 0,5440 168 F1500
50 0,75 0,65 17,68 662 0,3860 203 F1501
70 0,56 0,48 20,00 908 0,2720 254 F1503
95 0,50 0,40 22,12 1171 0,2060 315 F1504
120 0,36 0,31 24,54 1445 0,1610 363 F1505
150 0,31 0,27 26,87 1783 0,1290 416 F1506
185 0,28 0,24 28,89 2125 0,1060 475 F1507
240 0,23 0,20 32,62 2733 0,0801 559 F1508
300 0,20 0,17 36,46 3348 0,0641 637 F1511
400 0,18 0,16 42,10 4410 0,0495 752 -
500 0,16 0,14 45,80 5600 0,0391 833 F1513

For items marked with a dash (-) please enquire at branch or reference website.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
54
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

HO7RN-F FLEXIBLE GENERAL PURPOSE


TRAILING CABLE
Multicore HO7RN-F
450/750V

Current
Nominal Outer Max Resistance Approximate Volt
Size Approximate Mass Carrying Capacity Product
Cores Diameter at 20ºC Drop (mV/A/m)
(Air at 30ºC) Code
(mm2) (mm) (kg/km) Ω/km 3OI (A)
2 9,10 109 23 F1388
3 9,78 134 23 -
1,5 4 10,76 166 13,3000 20,18 21 F2244
5 11,80 206 21 F1389
7 14,75 315 16 F1390
2 10,80 158 32 F1396
3 11,58 196 32 -
2,5 4 12,73 241 7,9800 12,12 29 -
5 13,96 297 29 -
7 17,11 445 20 F1397
2 12,40 217 43 -
3 13,30 271 43 -
4 4 14,63 336 4,9500 7,53 38 -
5 16,25 422 38 F1402
7 19,64 618 25 F1403
2 14,20 297 56 -
3 14,78 355 56 F1405
6 4 16,44 449 3,3000 5,11 50 -
5 18,07 567 50 F1406
7 21,00 810 38 F1407
2 20,40 573 77 -
3 20,73 674 77 F1408
10 1,9100 2,94
4 22,57 833 68 F1409
5 24,75 1010 68 F1410
2 23,00 774 102 -
3 23,26 913 1,91 102 F1411
16 1,2100
4 25,36 1138 92 F1412
5 28,01 1400 92 F1413
2 27,40 1110 136 -
3 27,69 1324 136 F1414
25 0,7800 1,21
4 30,75 1714 122 F1415
5 33,91 2096 122 F1416
3 30,95 1754 168 F1417
35 0,5540 0,90
4 34,23 2204 150 F1418
3 35,80 2409 203 F1420
50 0,3860 0,65
4 39,56 3029 182 F1421
3 40,45 3211 262 -
70 0,2720 0,48
4 44,89 4121 232 F1422
3 44,90 4170 320 -
95 0,2060 0,43
4 50,36 5361 281 F1423
3 49,15 5080 373 -
120 0,1610 0,31
4 55,33 6546 325 F1424
3 53,70 6220 432 -
150 0,1290 0,27
4 60,87 8095 373 F1425
3 58,90 7730 495 -
185 0,1060 0,24
4 65,70 9652 425 F1426
3 66,80 9780 587 -
240 0,0801 0,20
4 75,50 12 614 500 F1435
3 74,10 12 620 680 -
300 0,0641 0,17
4 82,20 14 800 585 -

For items marked with a dash (-) please enquire at branch or reference website.
Note:
Additional core sizes are available on request.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 55
3
CABLE AND WIRES

BARE COPPER
Earth Wiring Cable
Cable Description
High conductivity plain soft stranded copper conductors
to SANS 1411.

Installation Information
For the wiring of earthing circuits where general house
wiring is used. Properties
• 1,5mm² - Amps at 30°C = 20 Specifications : SANS 1411-1
• 2,5mm² - Amps at 30°C = 27 Temperature Range : -10°C to 70°C
• 4,00mm² - Amps at 30°C = 37 Sheath Identification : Copper
• 6,00mm² - Amps at 30°C = 70 Packaging : 1,5mm² - 6mm², 5kg & 25kg coils
: 10mm² - 16mm², 25kg & 500kg wooden drums
: 25mm² - 240mm² & 500kg wooden drums
Technical Data
for Typical Guideline Values

Conductor Size Nominal Stranding Approximate Metres


(mm²) (No. x Diameter) (m/kg)
1,5 7/0,53 72,22
2,5 7/0,66 46,62
4 7/0,85 27,46
6 7/1,04 18,75
10 7/1,35 11,13
16 7/1,67 7,27
25 19/1,38* 4,54
35 19/1,62* 3,34
50 19/1,88* 2,46
70 19/2,28* 1,56
95 19/2,50 1,13
120 37/2,03 0,91
150 37/2,28 0,739
185 37/2,50 0,599
240 37/2,98 0,450

Note:
Compacted conductors.

Example Customer Enquiry:


180m of 70mm² Copper Earth Wire. 1kg of 70mm² Copper is therefore = 1,56m. So 180m divided by 1,56 = 115,38kg say 115kg.

Cable Size Kg Metre


(mm2) Product Code
1,5 F216 F4202
2,5 F217 F797
4 F218 F786
6 F219 F787
10 F220 F788
16 F221 F789
25 F222 F790
35 F223 F791
50 F224 F792
70 F225 F793
95 F226 F794
120 F227 F795
150 F228 F4240
185 F229 F4242

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
56
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

BELLS AND MAINS LOW VOLTAGE PVC CABLE


Useful Technical Data

Flamosafe® Range of Fire Preformance Electric Cables Description

FR (Flame Retardant) Red Stripe cables are designed to reduce the spread of fire along a
cable tray or duct. However, when these cables burn, they give off large quantities of toxic
gases and smoke. (FYRGARD®) (Common Type)

LHFR (Low Halogen) Blue Stripe cables have specially formulated PVC that reduces the
emission of hydro-chloric acid during burning of the cables. (LOHAL®)

NHLSFR (Non Halogen) White Stripe cables are designed to reduce flame propagation
and smoke in those instances where a fire may develop. By replacing the standard PVC with
XLPE insulation and EVA bedding and outer sheath, no HCI gases will be liberated during the
burning of the cables. (LOTOX®)

Note:
Flamosafe, Fyrgard, Lohal and Lotox are registered trademarks of Aberdare Cables, a member of the Powertech Group.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 57
3
CABLE AND WIRES

BELLS AND MAINS LOW VOLTAGE PVC CABLE


PVC PVC SWA PVC (FR)
600/1000V
Electrical and physical properties of 3 and 4 core PVC
insulated PVC bedded *SWA PVC sheathed 600/1000V
cables with aluminium or copper conductors and
manufactured to SANS 1507-3.

* Where the armouring of cable is used as the earth


continuity path, it may be necessary to replace some
of the steel wires with tinned copper wires (ECC) or to d
use a supplementary earth continuity conductor. D1 = Diameter over bedding
sheath
Installation Information
Residential applications, factories, office blocks and d = Diameter of armour wire
shopping centres.

D1 D2 = Diameter over outer


Technical Data D2 sheath

Copper Electrical Properties Physical Properties


Conductors Nominal Diameters
1 Sec Short Approximate
Current Rating
Impedance Volt Drop Circuit D1 d D2 Mass
Size Rating
Ground Ducts Air 3 Core 4 Core 3 Core 4 Core 3 Core 4 Core 3 Core 4 Core
(mm²) (A) (Ω/km) (mV/A/m) (kA) (mm) (kg/km)
1,5 24 20 19 14,48 25,080 0,17 8,51 9,33 1,25 1,25 14,13 14,95 448 501
2,5 32 26 26 8,87 15,363 0,28 9,61 10,56 1,25 1,25 15,23 16,18 522 597
4 42 34 35 5,52 9,561 0,46 11,40 12,57 1,25 1,25 17,02 18,39 667 762
6 53 43 45 3,69 6,391 0,69 12,58 13,90 1,25 1,25 18,40 19,72 790 910
10 70 58 62 2,19 3,793 1,15 14,59 16,14 1,25 1,25 20,41 21,96 996 1169
16 91 75 83 1,38 2,390 1,84 16,55 19,18 1,25 1,25 22,37 25,92 1295 1768
25 119 96 110 0,8749 1,515 2,87 19,46 21,34 1,60 1,60 26,46 28,34 1838 2196
35 143 116 135 0,6335 1,097 4,02 20,89 23,97 1,60 1,60 27,89 31,17 2215 2732
50 169 138 163 0,4718 0,817 5,75 24,26 28,14 1,60 1,60 31,46 36,54 2871 3893
70 210 171 207 0,3325 0,576 8,05 27,07 31,29 2,00 2,00 35,47 40,09 3617 4837
95 251 205 251 0,2460 0,427 10,92 31,19 35,82 2,00 2,00 39,99 44,62 4901 6115
120 285 234 290 0,2012 0,348 13,80 33,38 38,10 2,00 2,00 42,18 47,40 5720 7269
150 320 263 332 0,1698 0,294 17,25 36,68 42,05 2,00 2,00 45,98 52,65 6908 9250
185 361 298 378 0,1445 0,250 21,27 40,82 46,75 2,50 2,50 51,12 57,45 8690 11039
240 416 344 445 0,1220 0,211 27,60 46,43 53,06 2,50 2,50 57,13 64,16 10767 13726
300 465 385 510 0,1090 0,189 34,50 51,10 58,53 2,50 2,50 62,20 70,13 12950 16544

Electrical Properties Physical Properties


Aluminium
Conductors Nominal Diameters
1 Sec Short Approximate
Current Rating
Impedance Volt Drop Circuit D1 d D2 Mass
Size Rating
Ground Ducts Air 3 Core 4 Core 3 Core 4 Core 3 Core 4 Core 3 Core 4 Core
(mm²) (A) (Ω/km) (mV/A/m) (kA) (mm) (kg/km)
25 90 73 80 1,4446 2,502 1,80 17,76 20,65 1,60 1,60 24,76 27,65 1301 1554
35 108 87 99 1,0465 1,813 2,52 19,33 21,93 1,60 1,60 26,33 29,13 1477 1757
50 129 104 119 0,7749 1,342 3,61 21,87 25,05 1,60 1,60 29,07 32,25 1782 2150
70 158 130 151 0,5388 0,9333 5,05 24,76 29,27 1,60 1,60 31,96 37,67 2132 2930
95 192 157 186 0,3934 0,681 6,86 28,68 33,73 2,00 2,00 37,08 42,53 2908 3647
120 219 179 216 0,3148 0,545 8,66 31,09 35,44 2,00 2,00 39,89 44,24 3328 4023
150 245 201 250 0,2607 0,452 10,83 33,99 39,39 2,00 2,50 42,79 49,69 3837 5276
185 278 229 287 0,2133 0,369 13,35 37,80 44,51 2,00 2,50 47,10 54,81 4557 6231
240 324 268 342 0,1708 0,296 17,32 42,60 50,04 2,50 2,50 52,90 61,14 5977 7550

Note:
Under short circuit conditions a maximum conductor temperature of 160ºC is allowed for a maximum of 1 second.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
58
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

BELLS AND MAINS LOW VOLTAGE PVC CABLE


Definition of ECC Cable
ECC - Earth Continuity Conductor (SANS 1507 - 3)
When an improved conductivity in the earth d

continuity circuit of (SWA) steel wire armoured


multicore cable is required, an appropriate number
of steel armour wires may be replaced by tinned hard D1
D2
drawn copper wires of the same nominal diameter.
The copper wires shall comply with the relevant
requirements of Sans 1411-1.

PVC PVC SWA ECC PVC


Cable Size
Product Code
(mm²) 2 Core 3 Core 4 Core
1,5 F43 F45 F47
2,5 F50 F52 F54
4 F57 F59 F61
6 F64 F66 F68
10 F71 F73 F75
16 F77 F79 F81
25 F374 F376 F380
35 F381 F383 F387
50 - F389 F393
70 - F395 F399
95 - F401 F405
120 - F407 F410
150 - F412 F415
185 - - F419
240 - - F422
300 - - F850

LHFR (Low Halogen) Blue Stripe cables have d

specially formulated PVC that reduces the emission


of hydro-chloric acid during burning of the cables.
D1
(LOHAL®) D2

COPPER PVC PVC SWA PVC


Cable Size
Product Code
(mm²) 2 Core 3 Core 4 Core 7 Core 12 Core 19 Core 27Core 37 Core
1,5 F1793 F1794 F1795 F1814 F1815 F1816 F1818 F1819
2,5 F1797 F1798 F1799 F1801 F1832 F1833 F1835 F1836
4 F1782 F1783 F1784 F1786 F1844 F1845 F1846 F1847
6 F1788 F1789 F1790 F1791 - - - -
10 F1804 F1805 F1806 - - - - -
16 F1820 F1821 F1822 - - - - -
25 - F1830 F1831 - - - - -
35 - F1841 F1843 - - - - -
50 - F1850 F1851 - - - - -
70 - F1852 F1853 - - - - -
95 - - F1856 - - - - -
120 - F1807 F1808 - - - - -
150 - F1812 F1813 - - - - -
185 - F1823 F1824 - - - - -
240 - F1828 F1829 - - - - -
300 - F1838 F1840 - - - - -

Items above with (-) in the codes column, as well as aluminium are available on special request.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 59
3
CABLE AND WIRES

MULTICORE PVC CABLE


Low-Voltage Armoured Cable
600/1000V
Electrical and physical properties of Multicore
PVC Insulated PVC Bedded SWA PVC sheathed
600/1000V cables with stranded copper conductors d
manufactured to SANS 1507-3. D1 = Diameter over bedding sheath

d = Diameter of armour wire

D1 D2 = Diameter over outer sheath


Technical Data D2

1.5mm2 Electrical Properties Physical Properties


Multicore Cables Current Rating Nominal Diameters Product
Impedance Capacitance Mass
Ground Ducts Air (mm) Code
No. of Cores
(A) (Ω/km) (nF/Km) D1 d D2 (kg/km)
2 29 23 22 14,4782 422 8,1 1,25 13,8 422 F42
3 24 20 19 14,4782 422 8,6 1,25 14,3 456 -
4 24 20 19 14,4782 422 9,5 1,25 15,1 510 -
5 21 17 17 14,4782 422 10,3 1,25 15,8 577 -
6 20 16 16 14,4782 422 11,4 1,25 17,0 613 -
7 18 15 15 14,4782 422 11,4 1,25 17,0 629 F48
8 17 14 14 14,4782 422 12,6 1,25 18,2 710 -
10 16 13 13 14,4782 413 14,8 1,25 20,7 837 -
12 15 12 12 14,4782 413 15,3 1,25 21,2 901 F424
14 14 11 12 14,4782 413 16,2 1,60 22,0 980 -
19 12 10 11 14,4782 379 19,2 1,60 25,9 1404 F425
24 11 9 10 14,4782 379 22,4 1,60 29,3 1687 -
27 11 8 10 14,4782 379 22,9 1,60 29,8 1783 F427
30 10 8 9 14,4782 379 23,7 1,60 30,7 1867 -
37 9 7 9 14,4782 379 25,9 1,60 32,8 2153 -

2.5mm2 Electrical Properties Physical Properties


Multicore Cables Current Rating Nominal Diameters Product
Impedance Capacitance Mass
Ground Ducts Air (mm) Code
No. of Cores
(A) (Ω/km) (nF/Km) D1 d D2 (kg/km)
2 37 31 31 8,8668 487 9,0 1,25 14,7 475 F49
3 32 26 26 8,8668 487 9,6 1,25 15,2 524 -
4 32 26 26 8,8668 487 10,6 1,25 16,2 606 -
5 27 22 22 8,8668 487 11,5 1,25 17,0 690 -
6 25 20 21 8,8668 487 12,7 1,25 18,5 737 -
7 24 19 20 8,8668 487 12,7 1,25 18,5 756 F55
8 22 18 19 8,8668 487 13,0 1,25 18,9 806 -
10 21 17 18 8,8668 477 16,6 1,60 22,5 1000 -
12 19 15 17 8,8668 434 18,1 1,60 24,8 1306 F429
14 18 14 16 8,8668 434 19,0 1,60 25,7 1421 -
19 16 13 14 8,8668 434 21,4 1,60 28,1 1695 F430
24 14 12 13 8,8668 434 25,1 1,60 32,0 2053 -
27 14 11 13 8,8668 434 25,7 1,60 32,6 2181 F431
30 13 10 12 8,8668 434 26,6 2,00 34,8 2594 F861
37 12 10 11 8,8668 410 29,4 2,00 37,6 3011 -

Items above with (-) in the codes column, as well as aluminium are available on special request.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
60
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

MULTICORE PVC CABLE

4mm2 Electrical Properties Physical Properties


Multicore Cables Product
Current Rating Nominal Diameters
Impedance Capacitance Mass Code
Ground Ducts Air (mm)
No. of Cores
(A) (Ω/km) (nF/Km) D1 d D2 (kg/km)
2 50 41 41 5,5171 487 10,2 1,25 16,3 597 F56
3 42 34 35 5,5171 487 10,9 1,25 17,0 669 -
4 42 34 35 5,5171 487 12,3 1,25 18,4 764 -
5 35 28 29 5,5171 487 13,6 1,25 19,7 884 -
6 33 27 28 5,5171 487 14,9 1,25 21,0 961 -
7 31 25 26 5,5171 487 14,9 1,25 21,0 986 F62
8 29 24 25 5,5171 487 18,1 1,25 24,2 1079 -
10 27 22 24 5,5171 477 20,2 1,60 27,0 1251 -
12 25 20 22 5,5171 434 20,4 1,60 28,2 1211 F860
14 23 19 21 5,5171 434 22,8 1,60 29,6 1885 -
19 21 16 19 5,5171 434 24,9 2,00 32,5 2282 F1563
24 19 15 18 5,5171 434 31,0 2,00 38,6 3113 -
27 18 14 17 5,5171 434 32,2 2,00 39,8 3354 -
30 17 14 17 5,5171 434 35,8 2,00 43,4 3966 -
37 16 13 15 5,5171 410 36,2 2,00 43.8 4124 -

6mm2 Electrical Properties Physical Properties


Multicore Cables Product
Current Rating Nominal Diameters
Impedance Capacitance Mass Code
Ground Ducts Air (mm)
No. of Cores
(A) (Ω/km) (nF/lm) D1 d D2 (kg/km)
2 62 51 53 3,6868 556 11,8 1,25 17,4 684 F63
3 53 43 45 3,6868 556 12,6 1,25 18,4 791 -
4 53 43 45 3,6868 556 13,9 1,25 19,7 911 -
5 44 35 37 3,6868 556 15,3 1,25 21 1054 -
6 40 33 36 3,6868 521 17,7 1,60 24,4 1376 -

PVC Current Ratings are based on the following Environmental Parameters

Maximum Sustained Ambient Air Temperature Minimum Trench or


Ground Temperature Ground Thermal Resistivity
Conductor Temperature (Free Air Shaded) Duct Depth of Laying
70ºC 25ºC 30ºC 1,2 K.m/W 500mm

Items above with (-) in the codes column, as well as aluminium are available on special request.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 61
3
CABLE AND WIRES

TEXOPLAST™ FLAT CABLE - TPLF


Cable Construction
Conductor of copper, finely stranded to class 5/6,
cores PVC insulated, laid up in parallel, certain
multicores have core groups separated by a web,
PVC outer sheath, black.

Core Identification:
Up to 4 cores : coloured
5 cores and more : black with white
numbering, earth core
Cable description bearing - O without earth core
Cable description bearing - J with green/yellow
earth core
Application:
TPLF cables can be used in dry, damp or wet
environments as power, control and instrumentation TPLFT cables qualify as TPLF but offer tension relief steel cores and fire retardant sheath.
cables. PVC flat cable is preferably used indoors, in electrification systems where it is subjected
TPLFC cables qualify as TPLF but offer screened cores, to lots of flexing in a single plane i.e. cranes, hoists, conveyor systems, machine tools,
pairs or bundled core assemblies (b) of up to 80% lifts etc.
coverage.

Technical Data
Maximum operating Voltage AC up to 1,5mm² 450V/750V

Maximum operating Voltage AC from 2,5mm² 600V/1000V

Maximum operating Voltage DC up to 1,5mm² 675V/1125V

Maximum operating Voltage DC from 2,5mm² 600V/1500V

Test Voltage AC 3000V

Condutor resistance to DIN/VDE 0295 Class 5

mobile - 15°C to +70°C


Temperature range fixed - 40°C to + 70°C

Current Capacity VDE 0100

Derating VDE 0100

Specification according to VDE 0281 Part 403+404

mobile - 10x cable thickness


Minimum bending radius fixed - 4x cable thickness

not to exceed 15N/mm2 of total


Tensile stress core cross section of Type TPLF

Marking printed or embossed

Number of Cores and


Maximum Diameter of Single Strand Maximum Outer Dimension Approximate Weight
Rated Cross Section

(mm²) (mm) (mm) (kg/m)


TPLF-J
4 x 1,5 0,26 5,5 x 15,5 0,15
4 x 2,5 0,26 5,9 x 19,0 0,22
4x4 0,31 7,1 x 22,0 0,31
4x6 0,31 7,8 x 25,0 0,42
4 x 10 0,41 9,9 x 31,5 0,67
4 x 16 0,41 11,2 x 36,5 0,95
4 x 25 0,41 13,0 x 42,5 1,42
4 x 35 0,41 17,0 x 50,0 2,00
4 x 50 0,41 20,0 x 63,0 2,96
4 x 70 0,509 23,0 x 72,0 3,96
4 x 95 0,509 25,0 x 83,0 5,32
7x4 0,31 7,1 x 38,0 0,54
7x6 0,31 7,8 x 43,0 0,74
8 x 1,5 0,26 5,2 x 30,0 0,29
8 x 2,5 0,26 5,9 x 38,0 0,42
12 x 1,5 0,26 5,2 x 41,5 0,39
12 x 2,5 0,26 5,9 x 52,0 0,60

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
62
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

TEXOPLAST™ FLAT CABLE - TPLF


Flat Cable - TPLF

Number of Cores and Maximum Diameter of Maximum Outer Approximate


Rated Cross Section Single Strand Dimension Weight
(mm²) (mm) (mm) (kg/m)
TPLFC - J Screened
4x1 0,21 5,0 x 13,9 0,13
6 x 2,5 0,26 9,9 x 36,7 0,58
8 x 1,5 0,26 6,0 x 32,4 0,38
12 x 1,5 0,26 6,0 x 52,0 0,61
TPLFCb - Screened
5 x (4 x 0,5) - O 0,21 9,2 x 35,5 0,52
7 x (4 x 0,5) - O 0,21 10,3 x 50,0 0,75
7 x (3 x 1) - J 0,21 10,3 x 50,0 0,76
14 x (4 x 0,5) - O 0,21 10,3 x 100,0 1,51
TPLFT - J 2 - Tension Relief Cores
4 x 1,5 0,26 5,5 x 20,0 20,0
4 x 16 0,41 11,2 x 51,4 51,4
12 x 1,5 0,26 6,4 x 50,2 50,2

Note:
• Available on request.
• Lead times need to be confirmed at the time the order is placed.

TEXOPLAST™ SPECIAL LIFT FLAT CABLES - TPLFY


Special Lift Flat Cables - TPLFH (LWL) - O
Cable Construction

1. Flexible PVC-insulated stranded cores, alternate left


and right stranding lay, laid up in parallel.
2. Optical fibre cable (LWL).
3. Low-elastic supporting elements.
4. PVC outer sheath.

4 3 2 1

Number of Cores and Maximum Diameter Maximum Outer Maximum Approximate Maximum Single
Rated Cross Section of Single Strand Dimension Weight Suspension Height
(mm²) (mm) (mm) (kg/m) (m)
TPLFH (LWL) - O
12 x 1 + 2LWL 0,2 + *100/140 µm 51 x 6,4 0,52 80

Special Lift Flat Cables - TPLFT (TELF) - O


Cable Construction
1. 6-taped control cable groups comprising of
bundled left and right hand laid assemblies of 5
flexible PVC-insulated cores laid around a manila
rope centre, cores having an extra short lay, taped
and laid up in parallel.
2. 1 - Telephone cable group which comprises of 4
flexible PVC insulated cores laid up around a
central member in quad configuration, collectively
screened and polyethylene sheathed.
3. High tensile steel carrier elements.
4. PVC outer sheath, cold resistant. 4 3 2 1

Number of Cores and Maximum Diameter Maximum Outer Maximum Approximate Maximum Single
Rated Cross Section of Single Strand Dimension Weight Suspension Height
(mm²) (mm) (mm) (kg/m) (m)
TPLFH (telf) - O
34 x 1 0,15 76 x 11 1,15 220

Note:
• Available on request.
• Lead times need to be confirmed at the time the order is placed.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 63
3
CABLE AND WIRES

PENDANT CABLE - PVC


Cable Construction
Conductor of copper, finely stranded to class 5/6 - cores PVC
insulated - laid up in shorty corelay - taped - Nitrile outer sheath with
integrated tension relief stainless steel ropes positioned opposite
each other

Core Identification:
All cores are black and numbered with white print
Cable description bearing - J with green/yellow earth core

Application
Pendant Cable can be used in dry, damp or wet enviroments as
power and control cable. The usage extends to hoists, cranes,
stacking systems, conveyor systems, elevators etc.

Technical Data

Max. operating Voltage AC 600 V

Max. operating Voltage DC 900 V

Test Voltage AC 3000 V

Condutor resistance To DIN/VDE 0295 Class 5/6

Temperature range Mobile - 20°C to + 70°C

Current Capacity VDE 0100

Derating VDE 0100

Specification According to VDE 0250

Min. bending radius Mobile 15x cable thickness

tensile stress Not to exceed 15N/mm2 to VDE total core cross section

Marking Embossed

Number of Cores and Maximum Diameter of Maximum Outer Approximate


Rated Cross Section Single Strand Dimension Weight
(mm²) (mm) (mm) (kg/m)
PENDANT - J - Yellow - Class 5
27 x 1 32 x 0,20 21,7 - 34, 0 0,70
8 x 1,5 30 x 0,25 16,0 – 25,5 0,43
12 x 1,5 30 x 0,25 17,0 – 28,0 0,51
20 x 1,5 30 x 0,25 21,5 – 34,0 0,72
PENDANT - J - Black - Class 6
20 x 1,5 84 x 0,15 21,5 – 34,0 0,73

Note:
• Available on request.
• Lead times need to be confirmed at the time the order is placed.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
64
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

SINGLE CORE PVC PVC CABLE


Flexible Wiring
300/500V and 600/1000V
Cable Description
High conductivity annealed stranded copper
conductors to SANS 1411 Part 1. Insulated with general
purpose grade PVC in plain colours to
SANS 1411 Part 2. Properties
Specifications : SANS 1507-3 D1 = Diameter over
Installation Information Temperature Range : -10°C to 70°C conductor
For the wiring of : Voltage Rating : 600/1000V
• Industrial Buildings Sheath Identification : Black D2 = Diameter over PVC
D1
• Control Panels Packaging : 300/500m Drums sheath
D2

Technical Data

Cables A.C. or D.C. Cables in Trefoil Formation


Rated Nominal Nominal Voltage Drop Voltage Drop
Impedance Product
Area Diameters Mass Current Rating per Amp Current Rating per Amp Code
per metre per metre
(mm2) D1 D2 (kg/km) (Ω/km) Ground Air (mV) Ground Ducts Air (mV)
25 5,95 11,91 366 0,8767 118 133 1,7 127 91 109 1,50 -
35 7,00 12,96 469 0,6356 156 165 1,3 153 109 136 1,10 -
50 8,15 15,15 632 0,4745 186 203 0,9 180 130 171 0,80 -
70 9,79 16,57 880 0,3356 232 251 0,7 221 166 214 0,60 -
95 11,54 19,04 1160 0,2500 281 313 0,5 265 208 271 0,40 -
120 12,96 20,24 1413 0,2054 324 362 0,4 301 237 316 0,30 -
150 14,39 22,07 1734 0,1734 370 414 0,3 338 267 366 0,30 F1956
185 16,10 24,80 2145 0,1499 424 482 0,3 381 305 433 0,20 F1957
240 18,71 27,81 2725 0,1268 498 578 0,2 442 357 525 0,20 F1960
300 21,45 30,75 3375 0,1131 566 660 0,2 499 404 604 0,20 F1963
400 24,30 34,10 4395 0,1028 651 704 0,2 565 442 639 0,20 F1967
500 26,51 37,13 5299 0,0963 740 821 0,2 634 506 752 0,20 F1969
630 33,15 43,62 6965 0,0890 836 960 0,2 718 580 886 0,10 F1972

PVC Current Ratings are based on the following Environmental Parameters

Maximum Sustained Minimum Trench or


Ground Temperature (ºC) Ambient Air Temperature Ground Thermal Resistivity
Conductor Temperature Duct Depth of Laying
70ºC 25ºC 30ºC 1,2 K.m/W 500mm

Items above with (-) in the codes column, as well as aluminium are available on special request.
Note:
• Rating based on two touching cables installed in a duct.
• Assumed ambient air temperature is 30°C.
• Assumed maximum conductor temperature is 70°C.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 65
3
CABLE AND WIRES

SINGLE CORE XLPE PVC CABLE


General Purpose Wire
600/1000V
Cable Description
High conductivity annealed stranded or solid copper
conductors to SANS 1411 Part 1. Insulated with XLPE
plain colours to SANS 1411 Part 4.

Installation Information Properties


For the wiring of : Specifications : SANS 1507-4 D1 = Diameter over
• Industrial Buildings Temperature Range : -10°C to 90°C conductor
• Control Panels Voltage Rating : 600/1000V
Sheath Identification : Black D2 = Diameter over PVC D1
Packaging : 300/500m Drums sheath D2
Technical Data

Cables A.C. or D.C. Cables in Trefoil Formation


Nominal
Nominal Voltage Drop Voltage Drop
Rated Area Diameters Impedance Product
Mass Current Rating per Amp Current Rating per Amp
Ground Code
per metre per metre
(mm2) D1 D2 (kg/km) (Ω/km) Ground Air (mV) Ground Ducts Air (mV)
25 5,95 11,81 328 0,8767 169 162 2,0 151 103 143 1,7 -
35 7,00 12,86 426 0,6356 205 202 1,4 181 125 179 1,2 -
50 8,15 14,38 567 0,4745 245 255 1,0 213 154 229 0,9 -
70 9,79 16,22 824 0,3356 302 313 0,7 260 192 284 0,6 -
95 11,54 17,97 1071 0,2500 366 380 0,5 312 233 346 0,5 -
120 12,96 19,82 1304 0,2054 422 441 0,4 355 268 402 0,4 F1955
150 14,39 21,42 1628 0,1734 480 508 0,4 397 305 465 0,3 -
185 16,10 23,63 1995 0,1499 554 585 0,3 449 345 537 0,3 F1959
240 18,71 26,69 2461 0,1268 656 704 0,2 522 406 648 0,2 F1961
300 21,45 30,05 3182 0,1131 766 804 0,2 589 459 741 0,2 F1965
400 24,30 33,30 4117 0,1028 902 874 0,2 668 511 805 0,2 F1968
500 26,51 36,33 5032 0,0963 1040 1013 0,2 750 583 935 0,2 F1971
630 33,15 42,79 6641 0,0890 1229 1205 0,2 848 680 1115 0,2 F1974

PVC Current Ratings are based on the following Environmental Parameters

Maximum Sustained Minimum Trench or


Ground Temperature (ºC) Ambient Air Temperature Ground Thermal Resistivity
Conductor Temperature Duct Depth of Laying
90ºC 25ºC 30ºC 1,2 K.m/W 500mm

Items above with (-) in the codes column, as well as aluminium are available on special request.
Note:
• Rating based on two touching cables installed in air.
• Assumed ambient air temperature is 30°C.
• Assumed maximum conductor temperature is 90°C.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
66
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

ARMADAC®
PVC PVC SWA PVC (FR) Black/Red
1.9/3.3kV d

Cable Description
Electrical and physical properties of 3 core PVC
insulated PVC bedded SWA PVC sheathed 1.9/3.3kV
cables with copper conductors and manufactured to D1 = Diameter over bedding sheath
SANS 1507-3. d = Diameter of armour wire D1
D2 = Diameter over outer sheath D2
Installation Information
The cost effectiveness of transferring power over long distances through intermediate step-up and step-down systems is desirable for the electrification of
industrial and residential installations, including game lodges and agricultural industry applications.

Armadac® consists of 3 circular stranded plain soft copper conductors, PVC insulated, PVC bedded, Steel Wire Armoured, PVC sheathed, 1.9/3.3kV
manufactured to SANS 1507-3. Ideally utilised for the transfer of electricity over long distances.

Advantages of using an intermediate voltage cable over the conventional 400V 3-phase system offered by the increased voltage of 3,3kV include the fact
that volt drop will be considerably lower and small conductor sizes (10mm², 16mm² or 25mm²) will suffice for most applications. The Armadac® cable is steel
wire armoured and provides a robust mechanical protection to the cable, hence it is suitable to be installed underground. Furthermore, Armadac® offers
additional protection against attack by rodents and other animals as provided by the steel wire armouring. The steel wire armouring can also be utilised as
an earth continuity path, therefore eliminating the need for an external earth conductor. Armadac® makes use of circular cores which limits electrical stress
in the insulation and also incorporates a flame retardant PVC Sheath, which limits the spread of fire.

Properties
Specifications : SANS 1507-3
Temperature Range : -10°C to 70°C
Voltage Rating : 1900/3300V
Core Identification : Red, Yellow, Blue
Packaging : Available on 500m wooden drums

Technical Data

Electrical Properties Physical Properties


Current Rating 1 Sec Nominal Diameters
Cable Size Impedance Short Approx. Product
Volt Drop
Ground Ducts Air (Z) Circuit D1 d D2 Mass Code
Rating

(mm2) (A) (Ω/km) (mV/A/m) (kA) (mm) (kg/km)


10 68 58 60 2,19 3,793 1,4 20,7 1,6 27,3 1543 F2809
16 91 76 81 1,38 2,390 2,2 22,8 1,6 29,6 1859 F2810
25 113 95 103 0,8749 1,515 3,4 24,9 1,6 31,7 2221 F2811

Note:
• Recommended depth of lay 500mm. Soil thermal resistivity 1.2 km/W.
• Soil temperature at 25°C.
• In ground at 500mm depth.
• Armadac is a registered trademark of Aberdare Cables, a member of the Powertech Group.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 67
3
CABLE AND WIRES

AIRDAC® SNE CABLE


House Service Connecting Cable
with or without Pilot Cores
Cable Description
Circular stranded hard drawn copper phase conductor,
• Small overall diameter - concentric construction (SNE - Seperate Neutral Earth).
XLPE insulated with concentrically arranged identified
• Lower mass - due to smaller diameter - no steel wire armour.
neutral and bare earth conductors. Polyethylene
• Increased safety - reliable earthing.
sheathed 600/1000V service connection cable. Nylon
• Improved reliability - UV stable sheath and core insulation and water blocked.
ripcord laid under sheath. Manufactured to SANS
• Tamper and vandal proof - unauthorised access to phase conductor inhibited by
1507-6.
concentric layer.
• Easy strip with nylon ripcord.
Technical Data

Electrical Properties
Phase Conductor
Phase Core Pilot Cores Product Code
Resistance Earth Size Neutral Size Current Rating
Size Impedance (No. x OD) Solid
(Ohm/km) DC
at 20 °C (mm²) (mm²) (Z) (Ohm/km) (A) (mm)
10 1,90 7,5 10 2,34 50 2 x 1,13 F211
16 1,20 10 16 1,47 70 2 x 1,13 F215

Mechanical Properties

Phase Nominal Neutral Earth


Nominal Sheath Approximate Approximate
Conductor Insulation Conductor Conductor
Thickness Cable OD Cable Mass
Size }No. x OD{ Thickness }No. x OD{ {No. x OD}

)mm( )mm( )mm( )mm( )mm( )mm( (kg/km)

10 7 x 1,35 1,0 7 x 1,33 3 x 1,78 1,6 12,8 320


16 7 x 1,67 1,0 7 x 1,76 3 x 2,20 1,6 14,5 485

AIRDAC® II CNE CABLE


House Service Connect
Cable Description
Circular stranded hard-drawn copper phase conductor,
• Small overall diameter - concentric construction.
XLPE insulated with concentrically arranged bare earth
• Lower mass - due to smaller diameter - no steel wire armour.
conductors. Polyethylene sheathed 600/1000 V house
• Increased safety - reliable earthing.
service connection cable. Nylon ripcord laid under
• Improved reliability - UV stable sheath and core insulation.
sheath. Manufactured to SANS 1507-6.
• Tamper and vandal proof - unauthorised access to phase conductor inhibited by
concentric layer.
Technical Data • Easy strip with nylon ripcord.

Electrical Properties
Phase Conductor Resistance Phase Core Impedance Current Rating Symmetrical Short Circuit Rating for 1s Product Code
Size
(Ohm/km) DC at 20°C (Z) (Ohm/km) (A) kA
4 4,80 5,88 30 0,572 F207
10 1,90 2,34 50 1,431 F210

Mechanical Properties

Phase Nominal Earth


Nominal Sheath Approximate Approximate
Conductor Insulation Earth Size Conductor
Size Thickness Cable OD Cable Mass
{No. x OD} Thickness {No. x OD}
)mm( )mm( (mm²) )mm( )mm( )mm( )kg/km(
4 7 x 0,92 1,0 4 8 x 0,85 1,4 9,0 121
10 7 x 1,45 1,0 10 18 x 0,85 1,4 11,0 249

Note:
• In air, with 30°C ambient with maximum conductor temperature 90°C.
• Airdac is a registered trademark of Aberdare Cables, a member of the Powertech Group.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
68
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

AERIAL BUNDLE CONDUCTOR (ABC) CABLE


Cable Description
Supporting-core system consists of three phase cores
of hard-drawn stranded compacted aluminium
conductors insulated with carbon-loaded XLPE laid
up around an aluminium-alloy supporting core
Supporting Core
insulated with carbon loaded XLPE to ensure UV
protection. Additional sub-conductors optional in
both self-supporting and supporting-core systems. Properties
Specification : SANS 1418 Part 1 and 2
Installation Information Temperature Range : -10°C to 80°C
• Economical Voltage Rating : 600/1000V
• Flexible Core Identification : Phase 1, 2 and 3 indented
• Safe Non strain-bearing neutral,
• Vandal proof 2 longitudinal ribs on opposite surfaces 0,5mm x 1,00mm
• Durable Strain-bearing (supporting) neutral.
• Aesthetically pleasing 1 longitudinal rib on one surface 0,5mm x 1,00mm
• Adaptable Packaging : Available on 500m wooden drums.

Technical Data Based on 3 Core Plus Insulated Neutral

Electrical Properties

Supporting Core System


Conductor Conductor
Short Circuit Induction Impendance
Cable Size Current Rating Resistance Resistance Supporting
Rating Reactance (z) at 50Hz
at 20°C (AC) at 80°C Core Size
at 50Hz at 80°C
(mm2) (A) (kA) (Ω/km) (Ω/km) (mm2) (Ω/km) (Ω/km)
25 105 2,3 1,200 1,490 54,6 0,101 1,493
35 144 3,2 0,868 1,078 54,6 0,097 1,082
50 183 4,6 0,641 0,796 54,6 0,089 0,801
70 228 6,4 0,443 0,550 54,6 0,086 0,557
95 277 8,5 0,320 0,397 54,6 0,081 0,405
120 322 11,0 0,253 0,314 70 0,079 0,324
150 350 13,8 0,206 0,256 95 0,079 0,268

Mechanical Properties
Conductor Core Supporting Core System
Cable Size
Diameter Diameter
Supporting Approximate Approximate Maximum
Product Code
Phase Cores Min Max Min Max Core Size Assembly Diameter Assembly Mass Design Load
(mm2) (mm) (mm2) (mm) (kg/km) (kN)
25 5,6 6,5 8,4 9,6 54,6 26 507 6 -
35 6,6 7,5 9,8 11,1 54,6 28 612 6 -
50 7,7 8,6 10,9 12,3 54,6 32 730 6 -
70 9,3 10,2 12,9 14,3 54,6 34 944 6 -
95 11,0 12,0 14,6 16,2 54,6 38 1183 6 -
120 12,5 13,5 16,1 17,5 70,0 40 1600 8 -
150 13,9 15,0 17,5 19,2 95,0 44 1870 13 -
Above Plus 25mm² Auxiliary Core
25 32 612 -
35 34 717 -
50 36 835 -
70 N/A N/A N/A N/A N/A 38 1049 N/A -
95 42 1288 -
120 50 1705 -
150 56 1975 -

Temperature °C 25 30 35 40 45
Factor 1,11 1,05 1,00 0,94 0,88

Items above with (-) in the codes column are available on special request.
Also available in bare neutral, 1 core and insulated neutral, 2 core and insulated neutral and 3 core and insulated neutral configurations.
For further details on our Aerial Bundle Conductor Range please see our website or your nearest branch.
Note:
• Continuous current ratings are given for ambient temperature of 35°C, and maximum conductor temperature of 80°C.
For other ambient temperatures use adjoining rating factors.
• Short circuit ratings of 1 second duration, for a final conductor temperature of 130°C.
• Available in bare neutral configuration.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 69
3
CABLE AND WIRES

OVERHEAD ALUMINIUM CONDUCTORS


ACSR Aluminium Conductor Steel
Reinforced
Overview
Aluminium conductors have achieved wide
acceptance all over the world for use in overhead
transmission and distribution lines. Generally a steel
core is used with the aluminium to give the conductor
mechanical strength. This arrangement is termed
Aluminium Conductor Steel Reinforced or ACSR.
Conductors comprised entirely of aluminium are known as All Aluminium Conductors or AAC. These conductors are extensively used for busbars in
outdoor substations where spans are short. All Aluminium Alloy Conductors or AAAC consist of an alloying of aluminium to give a tensile strength in excess
of that of AAC, allowing longer spans. These conductors are recommended for coastal areas where severe corrosion is a problem.

Hard drawn aluminium in H9 temper is used in both ACSR and AAC. High strain steel wire is used in ACSR and this is sometimes protected from
corrosion by an application of grease. Such measures are particularly adopted when the conductor is intended for use in aggressive environments as
encountered in coastal regions.

Physical and Electrical Properties for Popular ACSR Sizes


Standing/ Mass Ultimate DC
Equival. Overall Aluminium Current
Wire Tensile Resistance Product
Type Copper Area Diameter Area (kg/km) Rating
Diameter Strength at 20°C Code
(mm2) (mm) (mm) (mm2) Aluminium Steel Total (N) Ohms/km (A)
Squirrel 12,90 6/1/2,11 6,33 20,98 57,70 27,50 85,20 8020 1,3677 130 F2042
Gopher 16,30 6/1/2,36 7,08 26,25 72,20 34,40 107 9610 1,0933 150 F2043
Fox 22,58 6/1/2,79 8,37 36,68 101 48,10 149 13100 0,7822 190 F2045
Ferret 25,81 6/1/3,00 9,00 42,41 117 55,60 173 15200 0,6766 210 F2046
Rabbit 32,26 6/1/3,35 10,05 52,88 145 69,40 214 18500 0,5426 240 F2047
Mink 38,71 6/1/3,66 10,98 63,13 174 82,80 257 21900 0,4546 260 F2048
Hare 64,52 6/1/4,72 14,16 104,98 289 138 427 36000 0,2733 360 F3362
6/4,72 -
Dog 64,52 14,15 104,98 289 100 389 34700 0,2733 360
7/1,57 F2052
Wolf 96,77 30/7/2,59 18,13 158,06 438 292 730 69200 0,1828 470 F2057
Panther 129,00 30/7/3,00 21,00 212,06 588 391 970 90800 0,1363 560 F2995
Bear 161,30 30/7/3,35 23,45 264,42 733 488 1220 112000 0,1093 650 F2972
Goat 193,50 30/7/3,71 25,97 324,31 899 598 1500 136000 0,0891 730 F2059

Items above with (-) in the codes column are available on special request.
For further details on our Overhead Aluminium Conductor Range please see our website or your nearest branch.
Note:
• Eskom marked product available on request.
• Lead times need to be confirmed at the time the order is placed.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
70
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE GLAND INDICATOR

The CONTRACTING
TOOL which fits in your pocket.
Voltex introduces, the essential new mobile app for
electrical contractors.
Now there’s an app that will make your life easier, no matter where you are.
Our mobile app gives electrical contractors a wealth of features*:

Energy Efficiency Comparison Calculator

Cable Gland Indicator

Motor Control Chart

Voltex Branch Locator with map

*Indications are for guideline purposes only and may vary for
individual results.

Search for “Voltex” on Apple iStore or Google Play and


download now. Any queries please email info@voltex.co.za.

iPhone is a trademark of Apple Inc. registered in the U.S. and


other countries. Google play is a trademark of Google Inc.
your electrical connection
www.voltex.co.za
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes
facebook.com/VoltexSA | andtwitter.com/voltexsa
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 71
3
CABLE AND WIRES

MV XLPE CABLE
Medium Voltage Electric Cable
6.6kV to 33kV
Properties and applications
Due to the fact that Vultex XLPE insulation is resistant
to high temperatures, it is obvious that higher
temperatures are permissible in the cable.
For XLPE, continuous conductor temperature up to 90°C are permissible, whilst for some hours a temperature of 130°C is permissible. In case of short-circuit
the conductor can withstand considerably higher temperature (up to 250°C).

This important specific characteristic, in contrast with those generally applicable to plastics, give XLPE insulated cables the following advantages:
• Suitable for a sustained conductor temperature of 90°C as a result of which a high current carrying capacity is obtained.
• Suitable up to 125 hours/annum, (no event being longer than 8 hours continuously) at a conductor temperature of 130°C so that emergency loads can
be tolerated.
• No drainage problems.
• Clean handling.
• Relatively low cost per installed kVA.

Technical Data
Electrical and Physical Properties of 3 core XLPE insulated PVC bedded, steel wire armoured, PVC sheathed 6.35/11kV cables to SANS 1339 Type A
(Individually screened).

Copper Conductors Standard Aluminium Conductors


Electrical Properties Physical Properties Electrical Properties Physical Properties
Cable Size 1 Second 1 Second
Current Current
Short Diameter Approximate Short Diameter Approximate
Rating Impedance Rating Impedance
Circuit Overall Cable Mass Circuit Overall Cable Mass
(Ground) (Ground)
Rating Rating
(mm2) (A) (Ω/km) (kA) (mm) (kg/km) (A) (Ω/km) (kA) (mm) (kg/km)
25 140 0,9353 3,575 47,3 4655
35 170 0,6783 5,005 49,7 5215
50 200 0,5067 7,150 52,6 5895 155 8284 4,600 52,6 5015
70 240 0,3581 10,010 56,3 6995 190 5767 6,440 56,3 5635
95 290 0,2665 13,585 60,5 8170 225 4213 8,740 60,5 6340
120 325 0,2187 17,160 64,2 9370 255 3375 11,040 64,2 7045
150 360 0,1847 21,450 68,8 11 240 285 2795 13,800 68,8 8350
185 410 0,1571 26,455 72,8 12 775 320 2285 17,020 72,8 9245
240 470 0,1317 34,320 79,1 14 955 370 1821 22,080 79,1 10 580
300 520 0,1160 42,900 85,6 17 865 420 1535 27,600 85,6 12 070

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
72
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

PAPER INSULATED CABLES

Paper Armoured (SWA or DSTA) Cable Paper Belted (up to 11kV) Cable

Paper Screened (11kV and above) Cable Paper Unarmoured Cable


Overview
Paper insulated cables have been in use longer than any other type of cable insulation and, due to the reputation built up over the years, are still
today a great favourite with engineers. When properly selected and correctly installed this product can be relied upon to provide a satisfactory and
trouble-free performance for many years.

Application
Paper insulated lead covered cables can be used in many electrical distribution and reticulation applications. Special constructions are also
available for use in specialised applications including:
• Electrical distribution in the petrochemical industry.
• Mining - a special construction for shaft installation is available with water blocking as well as flame retardancy.
• Fire and explosion hazardous areas.
• Submarine cables.
• Made to SANS 97.

Technical Services
Quality Assurance, Quality Control and Testing
As electric power cables are manufactured to provide many years of service, it is necessary that the raw materials used are of the highest quality and
conform to the rigid specifications laid down by South African Bureau of Standards. This also means that the production process has to be carefully
controlled, particularly in areas where heating, drying or cooling cycles can be critical to the overall characteristics and electrical properties of the
cable. Chemical, physical and electrical tests are carried out at various stages of manufacture. Final tests are all in accordance with SANS 97. Quality
assurance systems are in compliance with SABS ISO 9000 series.

Manufacturing Range

Conductor Size 16mm2 to 1000mm2

Conductor Material Standard Copper Standard Aluminium

No. Of Cores 1 3

Voltage 3.3kV 6.6kV 11kV 22kV 33kV

Belted

Electric Field Control Belted Screened

Bedding Jute Hessian PVC EVA MDPE HDPE

Armouring Aluminium Wire Steel Tape Steel Wire

Serving Jute Hessian PVC EVA MDPE HDPE


Steel Wired

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 73
3
CABLE AND WIRES

TABLE 17: 6.35/11KV 3 CORE


GENERAL PURPOSE BELTED CABLES
Fully impregnated armoured and served to SANS 97

Electrical Data
Product Code
Conductor Size (mm ) 2
25 35 50 70 95 120 150 185 240 300
Copper Conductors ohms/km 0,8700 0,6272 0,4633 0,3211 0,2316 0,1839 0,1494 0,1200 0,0921 0,0743 -
A.C Resistance
Aluminium Conductors ohms/km 1,4419 1,0430 0,7703 0,5325 0,3849 0,3045 0,2481 0,1979 0,1513 0,1216 -

Copper Conductors ohms/km 0,8779 0,6371 0,4751 0,3365 0,2499 0,2053 0,1739 0,1481 0,1245 0,1106 -
Impedance
Aluminium Conductors ohms/km 1,4421 1,0492 0,7777 0,5423 0,3972 0,3183 0,2640 0,2166 0,1734 0,1472 -

Maximum Copper Conductors A 105 130 160 195 235 265 295 335 380 425 -
Sustained
Ground
Current
Rating Aluminium Conductors A 80 100 125 155 185 210 235 265 305 340 -

Dimensional Data
Product Code
Conductor Size (mm2) 25 35 50 70 95 120 150 185 240 300
Over Lead Sheath mm 31,38 33,64 33,49 36,50 39,33 41,73 44,36 47,42 52,14 56,15 -
Diameter
Over Steel Tape Armoured Served mm 44,09 47,15 47,00 50,01 52,84 55,24 57,87 60,93 65,65 69,66 -
Serving Single Wire Armoured Served mm 44,89 48,15 48,00 51,01 53,84 56,24 60,17 63,23 67,95 74,52 -

Copper Steel Tape Armoured Served kg/km 4890 5710 6020 7080 8260 9440 10 770 12 290 14 480 16 940 -

Cable Conductors Single Wire Armoured Served kg/km 5110 6120 6440 7530 8760 9960 12 000 13 570 15 960 18 980 -
Mass Aluminium Steel Tape Armoured Served kg/km 4415 5055 5195 5790 6505 7225 7980 8870 10 050 11 415 -
Conductors Single Wire Armoured Served kg/km 4630 5465 5525 6240 7005 7745 9210 10 150 11 530 13 455 -

TABLE 18: 11/11KV 3 CORE


GENERAL PURPOSE BELTED CABLES
Fully impregnated armoured and served to SANS 97

Electrical Data
Product Code
Conductor Size (mm ) 2
25 35 50 70 95 120 150 185 240 300

Copper Conductors ohms/km 0,8700 0,6272 0,4633 0,3211 0,2316 0,1839 0,1494 0,1200 0,0921 0,0743 -
A.C Resistance
Aluminium Conductors ohms/km 1,4419 1,0430 0,7703 0,5325 0,3849 0,3045 0,2481 0,1979 0,1513 0,1216 -

Copper Conductors ohms/km 0,8779 0,6371 0,4751 0,3365 0,2499 0,2053 0,1739 0,1481 0,1245 0,1106 -
Impedance
Aluminium Conductors ohms/km 1,4468 1,0492 0,7777 0,5423 0,3965 0,3183 0,2640 0,2166 0,1734 0,1472 -
Maximum Copper Conductors A 100 120 150 185 220 250 280 320 365 410 -
Sustained
Ground
Current
Aluminium Conductors A 80 95 120 145 175 200 225 255 295 335 -
Rating

Dimensional Data
Product Code
Conductor Size (mm2) 25 35 50 70 95 120 150 185 240 300
Over Lead Sheath mm 35,14 37,60 37,67 40,68 43,51 45,71 48,32 51,40 56,54 60,53 -
Diameter
Over Steel Tape Armoured Served mm 48,65 51,11 51,18 54,19 57,02 59,22 61,83 64,91 70,05 74,04 -
Serving Single Wire Armoured Served mm 49,65 52,11 52,18 55,19 59,32 61,52 64,13 67,21 74,91 78,90 -

Copper Steel Tape Armoured Served kg/km 5880 6520 6995 8125 9365 10 360 11 750 13 325 16 070 18 570 -

Cable Conductors Single Wire Armoured Served kg/km 6205 6980 7495 8640 10 520 11 625 13 065 14 745 18 090 20 815 -
Mass Aluminium Steel Tape Armoured Served kg/km 5400 5865 6080 6835 7610 8145 8960 9905 11 640 13 045 -
Conductors Single Wire Armoured Served kg/km 5725 6325 6580 7350 8765 9410 10 270 11 325 13 660 15 290 -

Note:
• Lead times need to be confirmed at the time the order is placed.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
74
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

TABLE 19: 6.35/11KV 3 CORE GENERAL


PURPOSE SCREENED CABLES
Fully impregnated armoured and served to SANS 97

Electrical Data
Product
Code
Conductor Size (mm ) 2 25 35 50 70 95 120 150 185 240 300

Copper Conductors ohms/km 0,8700 0,6272 0,4634 0,3211 0,2315 0,1839 0,1494 0,1199 0,092 0,0742 -
A.C Resistance
Aluminium Conductors ohms/km 1,4419 1,0430 0,7704 0,5325 0,3848 0,3045 0,2481 0,1978 0,1513 0,1215 -

Copper Conductors ohms/km 0,8788 0,6382 0,4769 0,3381 0,2517 0,2073 0,1760 0,1503 0,1267 0,1129 -
Impedance
Aluminium Conductors ohms/km 1,4472 1,0497 0,7786 0,5429 0,3973 0,3191 0,2650 0,2176 0,1746 0,1484 -
Maximum Copper Conductors A 115 140 160 200 240 270 305 340 390 440 -
Sustained
Ground
Current
Aluminium Conductors A 90 105 125 155 185 210 235 270 305 345 -
Rating

Dimensional Data
Product
Code
Conductor Size (mm2) 25 35 50 70 95 120 150 185 240 300

Diameter Over Lead Sheath mm 32,79 35,05 37,73 38,20 41,02 43,21 45,84 48,90 53,35 58,06 -

Over Steel Tape Armoured Served mm 45,50 48,56 51,24 51,71 54,53 56,72 59,35 62,41 66,86 71,57 -
Serving Single Wire Armoured Served mm 46,30 49,56 52,24 52,71 55,53 57,72 61,65 64,71 69,16 76,43 -

Copper Steel Tape Armoured Served kg/km 5070 6015 6665 7455 8670 9680 11 035 12 575 15 080 17 735 -

Cable Conductors Single Wire Armoured Served kg/km 5315 6345 7165 7940 9175 10 235 12 300 13 945 16 580 19 880 -
Mass Aluminium Steel Tape Armoured Served kg/km 4595 5360 5770 6155 6920 7455 8245 9155 10 640 12 215 -
Conductors Single Wire Armoured Served kg/km 4840 5690 6270 6640 7425 8940 9510 10 525 12 140 14 360 -

Note:
• Lead times need to be confirmed at the time the order is placed.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 75
3
CABLE AND WIRES

CONTROL AND INSTRUMENTATION CABLES

• We supply an extensive range of instrumentation, control and telecommunication cables for the industrial market.

• These cables are used to provide voice and data services including measurement, sensing and control systems through the interconnection of
equipment and instrumentation.

• Control cables are used in industrial power or control circuits for conveying electrical signals to associated equipment and instruments.

• These cables are suitable for installation in cable trays, conduit or trenches as well as other outdoor locations.

• A wide range of solid or stranded copper conductor, insulated with Polyethylene, Cross Linked Polyethylene (XLPE) or PVC in single or multi pair/multi
triad and multicore industrial cables are available.

• These products are designed and manufactured according to specific or international standards.

• Cores are overall screened, whereas pairs can have screened over the laid-up pairs/triads (overall screened), or have screens around each individual
pair or triad in combination with an overall screen (individually+overall screened) in order to minimise cross talk and ground loop interference.

• Aluminium/Polyester foil is used for screening, and Tinned Copper Braid is also available in certain constructions. Various sheathing and armouring
designs are available, and include overall screening and armouring with Aluminium-Polyethylene-Laminate (APL) tape with Polyethylene as an outer
sheath, or Steel Wire Armouring with PVC or Polyethylene as an outer sheath.

• A comprehensive range of sheathing material is available ranging from Polyethylene and PVC to Limiting Oxygen Index (LOI) materials and Low Smoke
Zero Halogen (LSZH) options.

• For critical systems and applications a wide range of intrinsically safe industrial cable is available.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
76
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

DEKARON® (UNARMOURED) CABLE


Control Cable - Overall Aluminium/Mylar Foil Screened - Cores Unarmoured
Cable Construction
Stranded annealed copper conductor, cross-linked
Polyethylene (XLPE) insulated, the laid-up cores
aluminium/Mylar foil screened, tinned stranded
copper drain wire, flame retardant PVC sheathed.

Core Identification: Black, white red and blue up to


four core, thereafter white cores identified by black
alphanumerical marking.

Minimum
Standard Gross
Size Nominal OD Bending
CCG A2 Gland Drum Length Drum Weight
Cores Radius ± kg/km Product Code
Size
(mm²) (mm) (mm) (m) (kg)

300/500V
0,5 3 7,0 63 63 00-20ss 1000 112 -
0,5 4 7,8 70 77 00-20ss 1000 142 F1239
0,5 7 8,5 68 104 0-20s 1000 183 -
0,5 12 10,9 87 160 0-20s 1000 252 F3180
0,5 19 12,7 101 228 1-20 1000 347 -
0,5 24 15,1 120 305 2-25 500 235 -
0,5 27 15,9 127 336 2-25 500 248 -

600/1000V
1,0 3 7,8 71 86 00-20ss 1000 151 F1174
1,0 4 8,7 79 109 0-20s 1000 353 F1175
1,0 7 10,6 96 172 0-20s 1000 240 F1176
1,0 12 14,1 127 266 1-20 500 199 F1177
1,0 19 16,3 147 399 2-25 500 264 F1178
1,0 24 19,3 174 489 2-25 500 331 -
1,0 27 19,7 178 541 2-25 500 353 F1179

600/1000V
1,5 3 8,7 79 108 0-20s 1000 173 F1180
1,5 4 10,1 91 145 0-20s 1000 210 F1181
1,5 7 11,9 107 205 1-20 500 168 F1182
1,5 12 15,8 143 337 2-25 500 244 F3127
1,5 19 18,3 165 484 2-25 500 313 F3128
1,5 24 21,8 196 622 3-32 500 473 F3129
1,5 27 22,3 201 681 3-32 500 503 F3130

Items above with (-) in the codes column are available on special request.
Note:
• The above cable is also available in alternative constructions such as low - halogenated (black outer sheath with blue stripe) and zero - halogenated
(black outer sheath with white stripe) flame retardant cable. This type of cable is generally referred to as "Dekaron" unarmoured cable.
• The "Dekaron" range of cable does however also include galvanised single wire armoured (SWA) and Aluminium-Polyethylene-Laminate
(APL) armoured cables, which are also available in pairs and triad (trip) constructions.
• Lead times need to be confirmed at the time the order is placed.

Dekaron is a Furon trademark. Mylar (clear polyester) is a Du Pont trademark.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 77
3
CABLE AND WIRES

DEKARON® (ARMOURED) CABLE


Control Cable - Overall Aluminium/Mylar Foil Screened - Cores Steel Wire Armoured
Cable construction
Stranded annealed copper conductor, XLPE insulated,
the laid-up cores aluminium/Mylar foil screened,
tinned stranded copper drain wire, flame retardant
PVC sheathed, galvanised single wire armoured,
flame retardant PVC sheathed.

Core Identification: Black, white red and blue up to Voltage Rating : - 0.5mm² = 300/500V, 1.0 And 1.5mm² = 600/1000
four core, thereafter white cores identified by black
alphanumerical numbering.

Minimum
Standard Gross
Size Nominal OD Bending CCG BW
Cores ± kg/km Drum Length Drum Weight Product Code
Radius Gland Size
(mm2) (mm) (mm) (m) (kg)

300/500V
0,5 3 11,9 120 318 0-20s 1000 393 -
0,5 4 12,7 127 346 0-20s 1000 421 -
0,5 7 14,4 144 438 0-20 1000 946 -
0,5 12 17,0 170 572 0-20 1000 734 -
0,5 19 19,6 197 749 1-25 1000 895 -
0,5 24 21,9 219 873 1-25 1000 599 -
0,5 27 22,2 223 912 2-25 500 618 -

600/1000V
1,0 3 12,7 128 366 0-20s 1000 441 -
1,0 4 13,6 136 409 0-20s 1000 496 -
1,0 7 15,5 156 521 0-20s 1000 608 -
1,0 12 19,4 194 744 1-20 500 534 F3174
1,0 19 21,6 216 921 2-25 500 623 -
1,0 24 25,3 254 1 280 2-25 500 884 -
1,0 27 25,7 258 1 343 2-25 500 916 -

600/1000V
1,5 3 13,6 137 414 0-20s 1000 501 -
1,5 4 15,0 150 482 0-20s 1000 569 -
1,5 7 16,8 168 601 0-20 500 376 -
1,5 12 21,1 211 869 2-25 500 597 -
1,5 19 24,3 244 1256 2-25 500 790 -
1,5 24 27,8 278 1522 3-32 500 1005 -
1,5 27 28,7 287 1617 3-32 500 1053 -

Items above with (-) in the codes column are available on special request.
Note:
• The above cable is also available in alternative constructions such as low - halogenated (black outer sheath with blue stripe) and zero - halogenated
(black outer sheath with white stripe) flame retardant cable. This type of cable is generally referred to as "Dekaron" unarmoured cable.
• The "Dekaron" range of cable does however also include galvanised single wire armoured (SWA) and Aluminium-Polyethylene-Laminate (APL)
armoured cables, which are also available in pairs and triad (trip) constructions. Screens can be either overall aluminium/Mylar foil or individual and
overall aluminium/Mylar foil, and a tinned stranded copper drain wire is always included for each foil screen.
• Lead times need to be confirmed at the time the order is placed.

Dekaron is a Furon trademark. Mylar (clear polyester) is a Du Pont trademark.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
78
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

DEKARON® (APL ARMOURED) CABLE


Control Cable - Overall Aluminium/Mylar Foil Screened - Cores Aluminium - Polyethylene - Laminate
(APL) Armoured
Cable Construction
Stranded annealed copper conductor, XLPE insulated,
the laid-up pairs/triads individually and overall
aluminium/Mylar foil screened, each foil screen with
tinned stranded copper drain wire, flame retardant
PVC sheathed, Aluminium-Polyethylene-Laminate
(APL) armoured.

Core Identification: White Cores, alphanumerically Voltage Rating : - 0.5mm² = 300/500V, 1.0 and 1.5mm² = 600/1000V
numbered.

Minimum
Standard Gross
Size Nominal OD Bending CCG A2
Pairs ± kg/km Drum Length Drum Weight Product Code
Radius Gland Size
(mm ) 2
(mm) (mm) (m) (kg)

300/500V
0,5 3 10,8 98 118 0-20s 1000 193 -
0,5 4 11,5 104 136 1-20 1000 211 F1222
0,5 7 13,2 120 185 1-20 1000 272 -
0,5 12 15,8 143 259 1-20 1000 346 -
0,5 19 18,5 167 366 2-25 1000 512 -
0,5 24 20,8 187 436 2-25 or 3-32 500 305 -
0,5 27 21,1 190 464 3-32 500 394 -

600/1000V
1,0 3 11,6 105 145 1-20 1000 220 F1170
1,0 4 12,5 113 169 1-20 1000 244 F1225
1,0 7 14,4 130 239 1-20 1000 326 F1172
1,0 12 18,3 165 370 2-25 500 256 F1173
1,0 19 20,5 185 494 2-25 or 3-32 500 334 F2896
1,0 24 23,5 212 619 3-32 500 472 F3082
1,0 27 23,9 216 665 3-32 500 495 F3083

600/1000V
1,5 3 12,5 113 179 1-20 1000 254 F3119
1,5 4 13,9 125 217 1-20 1000 304 F3120
1,5 7 15,6 141 284 2-25 500 217 F3121
1,5 12 20,0 180 449 2-25 500 312 F3122
1,5 19 22,5 203 611 3-32 500 468 F3123
1,5 24 26,0 234 769 3-32 500 531 F3124
1,5 27 26,4 238 829 4-32 902 561 F3125

Items above with (-) in the codes column are available on special request.
Note:
• The "Dekaron" range of cable does however also include galvanised single wire armoured (SWA) and Aluminium-Polyethylene-Laminate (APL)
armoured cables, which are also available in pairs and triad (trip) constructions. Screens can be either overall aluminium/Mylar foil or individual and
overall aluminium/Mylar foil, and a tinned stranded copper drain wire is always included for each foil screen.
• Lead times need to be confirmed at the time the order is placed.

Dekaron is a Furon trademark. Mylar (clear polyester) is a Du Pont trademark.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 79
3
CABLE AND WIRES

PAIRS AND TRIADS OAM UNARMOURED


Instrument Cable - Overall Aluminium/Mylar Foil Screened - Pairs And Triads Unarmoured
Cable Construction
Stranded annealed copper conductor, XLPE
insulated, the laid-up pairs/triads aluminium/Mylar foil
screened, tinned stranded copper drain wire, flame
retardant PVC sheathed.

Core Identification: Black and white alphanumerically Voltage Rating : 250V (Core to Core)
numbered pairs, black, white and red,
alphanumerically numbered triads.

Minimum
Standard Gross
Size Nominal OD Bending CCG A2
Pairs ± kg/km Drum Length Drum Weight Product Code
Radius Gland Size
(mm²) (mm) (mm) (m) (kg)
Pairs
0,5 1 5,6 51 42 00-16ss 1000 91 F1237
0,5 2 8,9 81 88 0-20s 1000 153 F1238
0,5 4 10,6 96 128 0-20s 1000 203 F1239
0,5 8 13,3 121 212 1-20 1000 299 F1240
0,5 12 15,8 143 282 2-25 500 216 -
0,5 16 17,5 158 350 2-25 500 250 -
0,5 24 20,3 183 491 2-25 500 333 -
0,5 32 22,9 207 620 3-32 500 472 -
0,5 36 24,8 224 710 3-32 500 375 -
1,0 1 6,4 58 60 00-20ss 1000 109 F1241
1,0 2 10,8 98 131 0-20s 1000 206 F1242
1,0 4 12,4 112 183 1-20 1000 258 F1243
1,0 8 16,1 146 315 2-25 1000 477 F1244
1,0 12 18,7 169 428 2-25 500 285 F1245
1,0 16 21,1 190 562 3-32 500 368 -
1,0 24 24,1 217 772 3-32 300 394 -
1,5 1 7,2 66 73 00-20ss 1000 138 F1246
1,5 2 12,4 112 166 1-20ss 1000 241 F1247
1,5 4 14,7 132 247 1-20 or 2-25 1000 334 F1248
1,5 8 18,6 168 407 2-25 500 275 F1249
1,5 12 22,1 199 582 3-32 500 453 -
1,5 16 24,9 224 760 3-32 300 390 F2812
1,5 24 28,4 256 1050 4-40 300 477 -

Triads
0,5 1 5,9 54 51 00-16ss 1000 100 F1252
0,5 4 11,8 107 164 1-20 1000 239 -
0,5 8 15,7 141 280 2-25 1000 367 -
0,5 12 18,8 169 383 2-25 500 263 -
0,5 16 21,2 191 502 3-32 500 413 -
0,5 24 26,5 239 726 3-32 300 380 -
0,5 36 30,6 273 999 4-40 300 462 -
1,0 1 6,8 61 72 00-20ss 1000 121 F1253
1,0 4 14,3 129 255 1-20 1000 342 -
1,0 8 18,3 167 428 2-25 500 285 -
1,0 12 22,5 205 620 3-32 500 472 -
1,0 16 25,4 229 809 3-32 300 405 -
1,5 1 7,7 69 90 00-20ss 1000 155 F1254
1,5 4 16,4 148 325 2-25 1000 487 -
1,5 8 21,8 197 580 2-25 500 452 -
1,5 12 26,8 241 841 3-32 or 4-40 300 414 -

Items above with (-) in the codes column are available on special request.
Note:
• Lead times need to be confirmed at the time the order is placed.

Mylar (clear polyester) is a Du Pont trademark.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
80
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

PAIRS AND TRIADS IOAM UNARMOURED


Instrument Cable - Individually And Overall Aluminium/Mylar Foil Screened- Pairs And Triads -
Unarmoured
Cable Construction
Stranded annealed copper conductor, XLPE Insulated, the
laid-up pairs/triads individually and overall aluminium/
Mylar foil screened, each foil screen with tinned stranded
copper drain wire, flame retardant PVC sheathed.

Core Identification: Black and white alphanumerically


numbered pairs, black, white and red, alphanumerically
numbered triads. Voltage Rating: 250V (Core to Core)

Minimum
Standard Gross
Size Nominal OD Bending
Pairs ± kg/km Gland Size Drum Length Drum Weight Product Code
Radius

(mm2) (mm) (mm) (m) (kg)


Pairs
0,5 2 9,7 87 109 0-20s 1000 174 F1211
0,5 4 11,0 99 159 0-20s 1000 234 -
0,5 8 14,3 130 273 1-20 1000 348 -
0,5 12 16,9 152 347 2-25 500 249 -
0,5 16 19,4 175 458 2-25 500 316 F3318
0,5 24 22,9 207 627 3-32 500 478 -
0,5 32 26,1 235 824 3-32 500 558 -
0,5 36 27,6 249 907 4-40 500 698 -
1,0 2 11,1 101 148 1-20 1000 223 F1212
1,0 4 12,8 115 213 1-20 1000 288 F1214
1,0 8 16,7 151 377 2-25 1000 539 F1215
1,0 12 20,2 182 544 2-25 500 359 F1216
1,0 16 22,9 206 691 3-32 500 508 F1217
1,0 24 27,4 247 998 4-40 500 743 -
1,5 2 12,7 115 183 1-20 1000 258 F1218
1,5 4 15,0 136 297 2-25 1000 384 F1219
1,5 8 19,7 178 494 2-25 500 334 F2893
1,5 12 23,3 210 685 3-32 500 505 -
1,5 16 26,8 242 903 4-40 300 433 -
1,5 24 32,2 290 1305 4-40 300 554 -

Triads
0,5 4 12,2 110 189 1-20 1000 264 -
0,5 8 16,2 146 330 2-25 1000 492 -
0,5 12 19,8 179 479 2-25 500 327 -
0,5 16 22,0 198 599 3-32 500 462 F3320
0,5 24 27,5 248 872 4-40 300 424 -
0,5 36 32,1 286 1248 4-40 300 536 -
1,0 4 14,7 132 286 2-25 1000 373 -
1,0 8 19,2 175 509 2-25 500 342 F2813
1,0 12 23,3 210 712 3-32 500 518 -
1,0 16 26,1 237 931 3-32 300 441 -
1,5 4 16,8 152 348 2-25 1000 510 -
1,5 8 22,3 202 645 3-32 500 485 -
1,5 12 27,4 247 929 4-40 300 441 -

Items above with (-) in the codes column are available on special request.
Note:
• Lead times need to be confirmed at the time the order is placed.

Mylar (clear polyester) is a Du Pont trademark.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 81
3
CABLE AND WIRES

PAIRS AND TRIADS OAM SWA


Instrument Cable - Overall Aluminium/Mylar Foil Screened - Pairs/Triads Steel Wire Armoured
Cable Construction
Stranded annealed copper conductor, XLPE insulated,
the laid-up pairs/triads aluminium/mylar foil screened,
tinned stranded copper drain wire, flame retardant
PVC sheathed, flame retardant PVC bedding sheathed,
single wire armoured (SWA), flame retardant PVC outer
sheathed.

Core Identification: Black and white alphanumerically Voltage Rating: 250V (Core to Core)
numbered pairs, black, white and red, alphanumerically
numbered triads.

Minimum
Standard Gross
Size Nominal OD Bending CCG BW
Pairs ± kg/km Drum Length Drum Weight Product Code
Radius Gland Size
(mm2) (mm) (mm) (m) (kg)
Pairs
0,5 1 10,5 106 249 0-20s 1000 324 -
0,5 2 13,8 139 394 0-20s 1000 481 -
0,5 4 15,5 155 486 0-20s 1000 573 -
0,5 8 18,6 187 651 1-20 1000 797 -
0,5 12 21,1 212 810 2-25 500 567 -
0,5 16 22,8 228 930 2-25 500 627 -
0,5 24 26,3 263 1323 2-25 500 906 -
0,5 32 29,3 294 1589 3-32 500 1039 -
0,5 36 32,0 320 1903 3-32 300 733 -
1,0 1 11,3 114 290 0-20s 1000 365 F1233
1,0 2 15,7 158 489 0-20s 1000 576 F1234
1,0 4 17,3 174 589 1-20 1000 751 -
1,0 8 21,4 215 857 2-25 1000 1003 -
1,0 12 24,7 247 1199 2-25 500 762 -
1,0 16 27,1 271 1418 3-32 500 953 -
1,0 24 31,3 313 1986 3-32 300 758 -
1,5 1 12,1 122 329 0-20s 1000 404 F1235
1,5 2 17,3 173 572 1-20 1000 734 F1236
1,5 4 20,0 200 738 2-25 1000 884 -
1,5 8 24,6 247 1177 2-25 500 751 -
1,5 12 28,5 285 1510 3-32 500 999 -
1,5 16 32,1 321 2009 3-32 300 765 -
1,5 24 35,6 357 2448 4-40 300 978 -

Triads
0,5 1 10,8 109 269 0-20s 1000 344 -
0,5 4 16,7 168 557 1-20 1000 719 -
0,5 8 21,0 210 808 2-25 1000 954 -
0,5 12 24,8 248 1150 2-25 500 737 -
0,5 16 27,2 272 1371 3-32 500 930 -
0,5 24 33,7 337 2041 4-40 300 856 -
0,5 36 37,8 375 2499 4-40 300 994 -
1,0 1 11,7 117 316 0-20s 1000 391 -
1,0 4 19,6 196 733 2-25 1000 820 -
1,0 8 24,3 245 1179 2-25 500 752 -
1,0 12 28,9 291 1565 3-32 500 1027 -
1,0 16 32,6 326 2086 3-32 300 788 -
1,5 1 12,6 126 358 0-20s 1000 433 -
1,5 4 21,7 218 868 2-25 1000 1014 -
1,5 8 28,2 283 1505 3-32 500 997 -
1,5 12 34,0 340 2166 4-40 300 894 -

Items above with (-) in the codes column are available on special request.
Note:
• Lead times need to be confirmed at the time the order is placed.

Mylar (clear polyester) is a Du Pont trademark.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
82
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

PAIRS AND TRIADS IOAM SWA


Instrument Cable - Individually And Overall Aluminium/Mylar Foil Screened Pairs And Triads - Steel
Wire Armoured
Cable Construction
Stranded annealed copper conductor, XLPE insulated,
the laid-up pairs/triads individually and overall aluminium/
Mylar foil screened, each foil screen with tinned stranded
copper drain wire, flame retardant PVC s heathed.

Core Identification: Black and white alphanumerically


numbered pairs, black, white and red, alphanumerically
numbered triads. Voltage Rating: 250V (Core to Core)

Minimum
Standard Gross
Size Nominal OD Bending CCG BW
Pairs ± kg/km Drum Length Drum Weight Product Code
Radius Gland Size
(mm2) (mm) (mm) (m) (kg)

Pairs
0,5 2 14,6 146,0 439 0-20s 1000 526 F3146
0,5 4 15,9 159,0 527 0-20s 1000 614 F3147
0,5 8 19,6 197,0 761 2-25 1000 907 F3148
0,5 12 22,2 222,0 902 2-25 500 613 F3149
0,5 16 25,4 255,0 1267 2-25 500 878 F3150
0,5 24 29,3 293,0 1597 3-32 500 1043 F3152
0,5 32 33,3 334,0 2114 3-32 or 4-40 500 878 -
0,5 36 34,8 349,0 2268 4-40 300 924 -
1,0 2 16,0 161,0 517 0-20s or 1-20 1000 679 F1206
1,0 4 18,1 181,0 651 1-20 1000 797 F1207
1,0 8 21,4 215,0 934 2-25 1000 1080 F1208
1,0 12 26,2 262,0 1376 2-25 500 932 F1209
1,0 16 29,3 293,0 1644 3-32 500 1066 F3153
1,0 24 34,6 347,0 2356 4-40 300 951 F3155
1,5 2 18,0 180,0 620 1-20 1000 782 F1210
1,5 4 20,3 204,0 784 2-25 1000 930 F3156
1,5 8 25,7 257,0 1305 2-25 500 897 F2892
1,5 12 30,5 305,0 1863 3-32 500 1176 F2891
1,5 16 33,3 334,0 2228 4-40 300 912 F3157
1,5 24 39,8 339,0 2928 4-40 300 1170 F3159

Triads
0,5 4 17,1 172,0 594 1-20 1000 669 -
0,5 8 21,5 215,0 870 2-25 1000 1016 -
0,5 12 25,8 259,0 1292 2-25 500 890 -
0,5 16 28,4 284,0 1526 3-32 500 1025 -
0,5 24 34,7 347,0 2231 4-40 300 914 -
0,5 36 39,7 394,0 2838 4-40 300 1143 -
1,0 4 20,0 200,0 777 2-25 1000 923 -
1,0 8 25,2 254,0 1301 2-25 500 894 -
1,0 12 30,5 306,0 1892 3-32 500 1190 -
1,0 16 33,5 336,0 2250 4-40 300 919 -
1,5 4 22,1 221,0 911 2-25 1000 1155 -
1,5 8 28,7 288,0 1586 3-32 500 1037 -
1,5 12 34,6 347,0 2288 4-40 300 930 -

Items above with (-) in the codes column are available on special request.
Note:
• Lead times need to be confirmed at the time the order is placed.

Mylar (clear polyester) is a Du Pont trademark.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 83
3
CABLE AND WIRES

PAIRS AND TRIADS OAM APL POLY


Instrument Cable - Overall Aluminium/Mylar Foil Screened - Pairs/Triads Aluminium - Polyethylene -
Laminate (Apl) Armoured
Cable Construction
Stranded annealed copper conductor, XLPE Insulated,
the laid-up pairs/triads aluminium/Mylar Foil
screened, tinned stranded copper drain wire, flame
retardpant PVC bedding sheathed, Aluminium-
Polyethylene-Laminate (APL) armoured.

Core Identification: Black and white alpha Voltage Rating: 250V (Core to Core)
numerically numbered pairs, black, white and red,
alphanumerically numbered triads.

Minimum
Standard Gross
Size Nominal OD Bending CCG BW
Pairs ± kg/km Drum Length Drum Weight Product Code
Radius Gland Size
(mm ) 2
(mm) (mm) (m) (kg)

Pairs
0,5 1 9,4 85,0 90,0 0-20s 1000 155 F1220
0,5 2 12,7 115,0 153,0 1-20 1000 228 F1221
0,5 4 14,4 130,0 203,0 1-20 1000 290 F1222
0,5 8 17,1 155,0 287,0 2-25 1000 449 F3189
0,5 12 20,0 181,0 394,0 2-25 500 284 F3190
0,5 16 21,7 195,0 471,0 3-32 500 398 F3191
0,5 24 24,5 221,0 629,0 3-32 500 477 -
0,5 36 29,4 265,0 772,0 4-40 300 429 -
1,0 1 10,2 92,0 111,0 0-20s 100i 186 F1223
1,0 2 14,6 132,0 205,0 2-25 1000 292 F1224
1,0 4 16,2 146,0 265,0 2-25 1000 427 F1225
1,0 8 20,3 183,0 428,0 2-25 1000 590 F1226
1,0 12 22,9 206,0 557,0 3-32 500 441 F1227
1,0 16 25,3 228,0 706,0 3-32 500 499 F1228
1,0 24 28,5 258,0 949,0 4-40 300 447 -
1,5 1 11,0 100,0 128,0 0-20s 1000 203 F1229
1,5 2 16,2 146,0 248,0 2-25 1000 410 F1230
1,5 4 18,4 166,0 354,0 2-25 1000 500 F1231
1,5 8 22,8 206,0 535,0 3-32 500 430 F1232
1,5 12 26,3 237,0 730,0 3-32 500 511 -
1,5 16 29,4 265,0 943,0 4-40 300 445 -
1,5 24 33,0 297,0 1256,0 4-40 300 539 -

Triads
0,5 1 9,7 88,0 100,0 0-20s 1000 165 -
0,5 4 15,6 141,0 244,0 2-25 1000 331 -
0,5 8 19,8 179,0 392,0 2-25 1000 538 -
0,5 12 23,0 207,0 512,0 3-32 500 418 -
0,5 16 25,4 229,0 646,0 3-32 500 469 -
0,5 24 31,1 280,0 919,0 4-40 300 438 -
0,5 36 35,2 314,0 1217,0 5-50 300 609 -
1,0 1 10,5 95,0 126,0 0-20s 1000 201 F1250
1,0 4 18,4 166,0 357,0 2-25 1000 503 -
1,0 8 22,5 204,0 554,0 3-32 500 439 -
1,0 12 26,7 242,0 773,0 4-40 500 533 -
1,0 16 30,0 270,0 990,0 4-40 300 459 -
1,5 1 11,4 103,0 148,0 1-20 1000 223 F1251
1,5 4 20,6 186,0 442,0 2-25 or 3-32 1000 588 -
1,5 8 26,0 234,0 726,0 3-32 500 509 -
1,5 12 31,4 283,0 1036,0 4-40 300 473 -

Items above with (-) in the codes column are available on special request.
Note:
• Lead times need to be confirmed at the time the order is placed.

Mylar (clear polyester) is a Du Pont trademark.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
84
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

PAIRS AND TRIADS IOAM APL POLY


Instrument Cable - Individually And Overall Aluminium/Mylar Foil Screened - Pairs/Triads Aluminium -
Polyethylene - Laminate (Apl) Armoured
Cable Construction
Stranded annealed copper conductor, XLPE insulated,
the laid-up pairs/triads individually and overall
aluminium/Mylar foil screened, tinned stranded
copper drain wire, flame retardant PVC sheathed,
Aluminium-Polyethylene-Laminate (APL) armoured.

Core Identification: Black and white


alphanumerically numbered pairs, black, white and
red, alphanumerically numbered triads.

Minimum
Standard Gross
Size Nominal OD Bending CCG BW
Pairs ± kg/km Drum Length Drum Weight Product Code
Radius Gland Size
(mm ) 2
(mm) (mm) (m) (kg)

Pairs
0,5 2 13,4 121 177 1-20 1000 264 F1197
0,5 4 14,8 133 234 2-25 1000 321 F1198
0,5 8 18,5 167 378 2-25 1000 524 F3132
0,5 12 20,7 187 465 2-25 or 3-32 500 320 F3133
0,5 16 23,6 213 591 3-32 500 458 F3134
0,5 24 27,1 244 781 4-40 500 537 F3136
0,5 32 30,7 277 1016 4-40 500 752 -
0,5 36 32,2 290 1070 4-40 300 498 F3137
1,0 2 14,9 135 224 2-25 1000 311 F1199
1,0 4 16,5 149 297 2-25 1000 459 F1200
1,0 8 20,9 189 496 3-32 1000 642 F1201
1,0 12 24,4 220 682 3-32 500 503 F1202
1,0 16 27,0 244 845 4-40 500 569 F1203
1,0 24 32,0 289 1196 4-40 300 603 F1204
1,5 2 16,5 149 267 2-25 1000 429 F1205
1,5 4 19,2 173 388 2-25 1000 534 F3140
1,5 8 23,9 215 627 3-32 500 476 F3141
1,5 12 27,5 248 839 4-40 500 664 F3142
1,5 16 31,4 283 1099 4-40 300 492 F3143
1,5 24 36,8 332 1534 5-50 300 704 F3145

Triads
0,5 4 16,0 144 271 2-25 1000 358 -
0,5 8 20,4 184 444 2-25 1000 590 -
0,5 12 24,0 217 614 3-32 500 469 -
0,5 16 26,1 236 747 3-32 500 520 -
0,5 24 32,0 289 1070 4-40 300 483 -
0,5 36 36,7 328 1474 5-50 300 686 -
1,0 4 18,8 170 393 2-25 1000 539 -
1,0 8 23,4 213 641 3-32 500 483 -
1,0 12 27,5 248 868 4-40 500 678 -
1,0 16 30,7 278 1126 4-40 300 500 -
1,5 4 21,0 189 472 3-32 1000 618 -
1,5 8 26,5 239 787 3-32 500 540 -
1,5 12 32,0 289 1126 4-40 300 500 -

Items above with (-) in the codes column are available on special request.
Note:
• Lead times need to be confirmed at the time the order is placed.

Mylar (clear polyester) is a Du Pont trademark.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 85
3
CABLE AND WIRES

PAIRS OAM DEF SPEC


Pvc Insulated Overall Aluminium/Mylar Foil Screened Pairs, Colour Coded To Def. Stan 61-12
Cable Construction
Tinned stranded annealed copper conductor, PVC
insulated (150/250V), aluminium/Mylar foil screened,
tinned stranded copper drain wire, PVC sheathed
(Grey).

Size Nominal OD Packing Core CCG A2 Product


Pairs ± kg/km
Identification Gland Size Code
(mm2) (mm) (m)
0,22 2 6,2 51 1000 DEF STAN 61-12 00-20ss F1184
0,22 3 6,5 62 1000 DEF STAN 61-12 00-20ss F2653
0,22 4 7,2 76 1000 DEF STAN 61-12 00-20ss F1185
0,22 6 8,1 108 1000 DEF STAN 61-12 00-20ss or 1-20 F2654
0,22 8 9,2 122 1000 DEF STAN 61-12 0-20s F2655
0,22 12 11,6 179 1000 DEF STAN 61-12 1-20 F2656
0,22 18 13,4 242 500 DEF STAN 61-12 1-20 -
0,22 25 15,4 323 500 DEF STAN 61-12 2-25 -
0,22 30 16,4 355 500 DEF STAN 61-12 2-25 -
0,22 36 18,3 408 500 DEF STAN 61-12 2-25 -
0,22 50 20,3 518 500 DEF STAN 61-12 2-25 -
0,50 1 5,1 56 1000 DEF STAN 61-12 00-16ss F1186
0,50 2 7,6 76 1000 DEF STAN 61-12 00-20ss F1187
0,50 3 8,1 105 1000 DEF STAN 61-12 00-20ss -
0,50 4 8,6 119 1000 DEF STAN 61-12 0-20s F1188
0,50 6 11,2 160 1000 DEF STAN 61-12 0-20s or 1-20 F1189
0,50 8 12,2 205 1000 DEF STAN 61-12 1-20 F1190
0,50 12 15,2 271 1000 DEF STAN 61-12 2-25 F1191
0,50 18 18,8 381 500 DEF STAN 61-12 2-25 -
0,50 20 21,3 418 500 DEF STAN 61-12 3-32 -
0,50 25 22,3 497 500 DEF STAN 61-12 3-32 -

Pair DEF STAN 61-12 COLOUR CODING

1 (Red, blue)

2 (Red, blue), (green, yellow)

4 (Red, blue), (green, yellow), (white, black), (brown, violet)

6 (Red, blue), (green, yellow), (white, black), (brown, violet), (orange, pink), (turquoise, grey), (red/blue - green/red)

(Red, blue), (green, yellow), (white, black), (brown, violet), (orange, pink), (turquoise, grey),
8
(Red/blue - green/red), (yellow/red - white/red)

(Red, blue), (green, yellow), (white, black) (brown, violet), (orange, pink), (turquoise, grey),
12 (Red/blue -- green/red), (yellow/red - white/red), (yellow/blue - white/blue), (orange/blue - green/blue),
(Black/blue - grey/blue), (yellow/green - white/green)

(Red, blue), (green, yellow), (white, black) (brown, violet), (orange, pink), (turquoise, grey),
(Red/blue -- green/red), (yellow/red - white/red), (yellow/blue - white/blue), (orange/blue - green/blue),
16
(Black/blue - grey/blue), (yellow/green - white/green), (orange/green - grey/green),
(Red/brown - yellow/brown), (white/brown - grey/brown), (green/black - violet/black),

(Red, blue), (green, yellow), (white, black) (brown, violet), (orange, pink), (turquoise, grey),
(Red/blue -- green/red), (yellow/red - white/red), (yellow/blue - white/blue), (orange/blue - green/blue),
20 (Black/blue - grey/blue), (yellow/green - white/green), (orange/green - grey/green),
(Red/brown - yellow/brown), (white/brown - grey/brown), (green/black - violet/black),
(Red/black - brown/black), (yellow/violet - white/violet), (red, yellow), (green, black)

(Red, blue), (green, yellow), (white, black) (brown, violet), (orange, pink), (turquoise, grey),
(Red/blue - green/red), (yellow/red - white/red), (yellow/blue - white/blue), (orange/blue - green/blue),
(Black/blue - grey/blue), (yellow/green - white/green), (orange/green - grey/green),
25
(Red/brown - yellow/brown), (white/brown - grey/brown), (green/black - violet/black),
(Red/black - brown/black), (yellow/violet - white/violet), (red, yellow), (green, black),
(White, violet), (brown, pink), (orange, grey), (turquoise, blue), (red, black)

Items above with (-) in the codes column are available on special request.
Note:
• Lead times need to be confirmed at the time the order is placed.
• Also available in individual and overall aluminium/polyester foil screened construction.

Mylar (clear polyester) is a Du Pont trademark.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
86
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE AND WIRES

CAT 5E SOLID UNSHIELDED TWISTED PAIR


(UTP) CABLE
Cable Construction
24 American wire guage (AWG) (1/0.51mm) solid plain
annealed copper conductor polyolefin insulated, 4
colour coded twisted pairs laid - up and PVC sheathed.

Temperature Range
0°C to +50°C (installation) and -20°C to +70°C
(installed).

Compliance
This cable is EC verified and complies with: ISO 11801,
TIA/EIA 568a and EN 50173.

Electrical Characteristics (Standards) at 20°C


Mutual Velocity of Characteristic
DC Resistance Resistance Capacitance Skew
Capacitance Propagation Impedance
Ω (±15%) at 1.0 to
Ω/km Maximum % nF/km Maximum pF/km Maximum nsec/km Maximum (VOP)
100 Mhz
93,8 2 56 1000 450 0.68c 100

Electrical Characteristics (Standards) for CAT 5E


Power Sum Near End Cross Power Sum Equal Level Far
Frequency Attenuation Near End Cross Talk (NEXT)
Talk (PSNEXT) End Cross Talk (PSELFEXT)
MHz dB/100m dB dB dB
1 2,1 65,3 62,3 60,8
4 4,3 56,3 53,3 48,7
10 6,6 50,3 47,3 40,8
16 8,2 47,3 44,3 36,7
20 9,2 45,8 42,8 34,7
31 11,8 42,9 39,9 30,9
63 17,1 38,4 35,4 24,8
100 22,0 35,3 32,3 20,8

Size Nominal OD Cable Weight Total Weight/


Fire Safety Standard
Pairs 500m Drum Product Code
Compliance Packing
(mm2) (mm) (kg/km) Per 305m Box
305m easy-pull box
0,2044 4 5,0 34 17.8/10.3 IEC 332-1 or 500m F1166
plastic reel

Available in the following coding colours:

Pair 1 : Blue/white with blue stripe.


Pair 2 : Orange/white with orange stripe.
Pair 3 : Green/white with green stripe.
Pair 4 : Please see image above.

Note:
• Kindly enquire about our other communication cables such as CAT 6.
• Lead times need to be confirmed at the time the order is placed.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 87
3
CABLE AND WIRES

OUTDOOR TELEPHONE CABLE


Galvanised Wire Armoured
Cable Construction
Solid annealed copper conductor, PVC insulated,
PVC bedding sheathed, galvanised wire armoured,
PVC sheathed outdoor telephone cable to Telkom
specification 268/271 W/A.

Maximum Minimum
Size Nominal OD Cable Weight Total Weight/ Conductor Loop Insulation
Pairs Resistance Resistance Product Code
1000m Drum

(mm2) (mm) (kg/100 m) (Ω/km) (MΩ-km)


0,6 2 9,5 21,4 278 129,4 37,5 F2670
0,6 4 11,5 28,9 353 129,4 37,5 F2671
0,6 5 12,0 31,5 380 129,4 37,5 F2672
0,6 6 12,5 34,9 414 129,4 37,5 F2673
0,6 10 14,0 41,1 476 129,4 37,5 F1596
0,6 15 15,5 51,2 635 129,4 37,5 F2674
0,6 20 16,5 58,1 662 129,4 37,5 F2675
0,6 30 18,0 67,2 730 129,4 37,5 F2677
0,6 40 20,0 85,8 553 129,4 37,5 F2678
0,6 51 24,0 124,0 852 129,4 37,5 -
0,6 76 26,5 160,0 900 129,4 37,5 -
0,6 100 31,0 206,2 1263 129,4 37,5 F2681
0,9 4 13,0 36,9 450,0 55,8 37,5 F2683
0,9 5 14,0 42,0 485,0 55,8 37,5 F2684
0,9 6 14,5 46,1 543,0 55,8 37,5 F2685
0,9 10 16,0 57,9 661,0 55,8 37,5 F2686
0,9 15 18,5 74,2 453,0 55,8 37,5 F2687
0,9 20 19,5 86,4 514,0 55,8 37,5 F2688
0,9 30 24,5 136,3 805,0 55,8 37,5 F2690
0,9 40 26,5 160,2 970,0 55,8 37,5 F2691
0,9 51 29,5 192,3 1194,0 55,8 37,5 -
0,9 76 35,0 273,5 1597,0 55,8 37,5 -

Items above with (-) in the codes column are available on special request.
Note:
• Lead times need to be confirmed at the time the order is placed.

INDOOR TELEPHONE CABLE


Cable Construction
Solid Annealed Copper Conductor (plain or tinned),
PVC insulated, white PVC Sheathed indoor telephone
cable to Telkom spec 268/271.

Maximum Minimum
Size Nominal OD Cable weight Total Weight/ Conductor Loop Insulation
Pairs Resistance Resistance Product Code
1000m Drum
(mm) (mm) (kg/m) (Ω/km) (MΩ-km)
0,5 2 3,8 2 49 186,4 37,5 F1597
0,5 3 5,1 3 96 186,4 37,5 F2658
0,5 4 5,6 4 67 186,4 37,5 F2659
0,5 5 5,8 4 109 186,4 37,5 F2660
0,5 6 6,8 5 117 186,4 37,5 F2661
0,5 10 8,4 9 146 186,4 37,5 F1598
0,5 15 9,7 11 178 186,4 37,5 F2662
0,5 20 10,7 15 213 186,4 37,5 F2663
0,5 25 11,4 18 243 186,4 37,5 F2664
0,5 30 11,7 21 291 186,4 37,5 F2665
0,5 40 14,2 27 358 186,4 37,5 F2666
0,5 50 16,0 35 429 186,4 37,5 F2667
0,5 75 18,0 51 570 186,4 37,5 F2668
0,5 100 22,8 69 752 186,4 37,5 F2669

Note:
• Lead times need to be confirmed at the time the order is placed.
• Above codes refer to plain configuraiton.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
88
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE PROTECTION
AND EQUIPMENT

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 89
3
CABLE PROTECTION AND EQUIPMENT

AERIAL CABLE ROLLER

Technical Data
Overall Max Cable
Weight
Dimensions Diameter
Finish Product Code
WxHxL
(mm) (kg)
(mm)

Black Powder
200 x 300 x 100 120 4.00 O10844
Coating

Description

• Aerial rollers are used for stringing bundled insulated conductors up to 120mm outside
diameter in overhead applications.
• Rollers are suspended from a 760kg safety hook.
• Cable is fed through a side opening lockable latch.
• Rollers are available in polyurethane or alluminium.

CABLE PULLING SOCKS

Technical Data
Cable Lattice Overall Breaking
Diameter Length Length Strain Product
Weave
Code
(mm) (mm) (mm) (ton)
6 - 13 Single 230 305 0.75 O10845
13 - 19 Single 355 430 1.00 O10846
19 - 25 Single 405 510 2.50 O10847
25 - 38 Single 455 610 3.50 O10848
38 - 50 Double 535 735 5.00 O10849
50 - 63 Double 610 865 5.00 O10850
63 - 89 Double 685 990 6.00 O10851
89 - 115 Double 685 990 7.00 O10852
115 - 130 Double 685 990 7.00 O10853

Description

• Cable pulling socks are also referred to as cable stockings or cable grips.
• This is the most efficient equipment to use when pulling cable in trenches, ducts or buildings.
• Socks are manufactured from high tensile galvanised steel and are available in single eye,
double eye or lace up derivatives.
• All socks can also be supplied in stainless steel or kevlar.

Note:
• Aerial rollers are manufactured to order only. Minimum lead time of 14 working days is applicable.
• The following additional products are available on request:
• Swivels.
• Cable Pulling Socks.
• Cable Drum Jacks.
• Cable Drum Trailers.
• Cable Pulling Winches.
• Cable Laying Rollers.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
90
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE PROTECTION AND EQUIPMENT

CABLE LAYING ROLLERS


Technical Data
Overall Maximum Weight
Dimensions Cable
Diameter Finish Product Code
WxHxL Polyurethane Aluminium
(mm) (mm) (kg)
120 Outside Black Powder
150 x 200 x 450 3,20 4,30 O10856
Diameter Coating

Description

• Roller frames can be electroplated or hot dipped galvanised.


• The standard finish is a black powder coated frame.

Note:
• Rollers are available in polyurethane or aluminium.
• Minimum lead time of 14 working days is applicable.
• Rollers are manufactured to order only.
• The following additional products are available on request:
• Swivels
• Cable Pulling Socks
• Cable Drum Jacks
• Cable Drum Trailers
• Cable Pulling Winches

CABLE DRUM JACKS


Screw Type

Technical Data
Base
Dimensions Closed
Capacity Drum Lift Weight Recommended Product
Height
Range LxW Shaft Code
(kg) (mm) (mm) (mm) (kg)
1.50m to
60mm Outside
2.40m
5000 1000 x 400 720 450 40 Diameter x 2.00m O10854
Outside
Long
Diameter

Description

• Screw jacks are simple to use and the lowest cost options.
• They feature large stable bases, tough structural steel frames and large capacity iron shaft cups.
• This is a sturdy jack suitable for the toughest of site conditions.
• The range of cable drum jacks have been load tested on numerous occasions.

Hydraulic Type

Technical Data
Base
Dimensions Closed
Capacity Drum Lift Weight Recommended Product
Height
Range LxW Shaft Code
(kg) (mm) (mm) (mm) (kg)

0.75m to
60mm Outside
2.40m
5000 1000 x 400 1200 300 80 Diameter x 2.00m O10855
Outside
Long
Diameter

Description

• Hydraulic jacks are fast and require less physical effort.


• The basic hydraulic unit's travel is extended to give a wide range of operating heights.
• The jacks are constructed of a high tensile fabricated frame with a multi-cup sub frame.
• This jack is suitable for all conditions.
• The range of cable drum jacks have been load tested on numerous occasions.

Note:
• Should test certificates be required please indicate this at the time of order as it could affect lead times.
• The following additional products are available on request:
• Cable Laying Rollers.
• Cable Measuring Meters.
• Hand Operated Coiling Units.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 91
3
CABLE PROTECTION AND EQUIPMENT

HYDRAULIC CABLE SPIKING TOOL


The spiking tool is totally hydraulic in operation and does not require cartridges or a licence to operate. The product has been developed for use under all
conditions and through extensive testing meets all required safety precautions.

The spiking tool is simple to operate and will easily penetrate every form of normally applied cable covering up to 110mm outside diameter. The design is
such that it will provide years of trouble free usage and can be used vertically or horizontally.

In the event of accidental spiking into a live cable the chisel will be burned. Minimum repairs would be needed such as resharpening the chisel or
replacing it immediately at low cost.

A number of municipalities are now insisting on the use of a spiking tool to finally determine if a cable is dead before cutting. The intelligent use of this unit
can be a lifesaver and under all conditions will give definite manpower accident prevention.

The spiking tool and all its components comes packed in a powder coated case.

Technical Data
Weight Length Width Height
Product Code
(kg) (mm) (mm) (mm)

28 600 400 200 O10857

CABLE PROTECTION SLABS


Used to protect electric cables, optic fibre cables, water pipes and other vulnerable underground sevices. Bury just on top of cable with selected material
in-between or just under the topsoil layer.

Technical Data
Size
Specifications Mass Product Code
WxHxL
(mm) (kg)

Concrete: 25Mpa Semi-Dry


Compacted Machine Made.

H10186
300 x 60 x 1000 40

Finish: The Finish Is Press-Textured


and Suitable for Underground Use.

Concrete: 25Mpa Semi-Dry


Compacted Machine Made.

300 x 60 x 500 20 H10187

Finish: The Finish Is Press-Textured


and Suitable for Underground Use.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
92
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE PROTECTION AND EQUIPMENT

FLEXIBLE CONDUIT AND ACCESSORIES


Kabelflex®
Protecting underground buried electrical & telecommunication cables:
• Kabelflex is a cable conduit (duct) used for protecting underground buried electrical and telecommunications cables.
• Double wall corrugated construction.
• Smooth bore ensures easy draw-in of cables.
• Manufactured from HDPE with high impact strength
• Available in 4 nominal diameters DN50,75,110 & 160mm.
• Available in 6m lengths (DN75,110 and 160).
• 50m coils (DN50,75 and 110) and 25m coils (DN160).
• Carries the SABS certification mark in respect of specification SANS IEC 6138624:2005.
• Manufactured in accordance with BS EN50086-2-2.
• Simple push fit couplings available with or without rubber sealing ring.

Minimum
Outside Inside Standard Bending
Type Diameter Diameter Straight Length Radius 6m Product Code
length
(mm) (mm) (mm) (mm)

50 40 n/a n/a K6311

75 63 1400 250 K27

110 95 2500 350 K869

160 137 4000 450 K925

Kabelflex® Coils

Minimum
Outside Inside Standard
Bending
Type Diameter Diameter Length Coils Product Code
Radius Coils
(mm) (mm) (mm) (mm)

50 40 n/a n/a K413

Chemical Resistance
As Kabelflex is manufactured from
Kabelflex -
HDPE it is highly chemically Cost effective
resistant. It is unaffected by acids
or alkalis in the most aggressive and innovative
soils and is also resistant to
petroleum. A detailed chemical
resistance specification is
available on request. 75 63 1400 250 K916

110 95 2500 350 K870

Compression Resistance Temperature Resistance


Kabelflex has excellent Kabelflex has an upper working 160 137 4000 450 K926
compression resistance, or “ring temperature of 100°C versus
Impact Resistance stiffness” due to the reinforcing 60°C for uPVC pipe (measured in
Jointing Impact resistance is a measure of effect of the external corrugations. accordance with DIN53446). The
Kabelflex is joined by means of how easily a pipe splits or cracks Kabelflex has more than 5 times thermal conductivity of HDPE
push fit couplings (which provide when subjected to an impact the ring stiffness of normal duty (0.4W/mK) is also better than
an IP30 index of protection). For force. Pipes with a low impact uPVC sewer pipe** (550kPa uPVC (0.14W/mK) which means
conduit sizes DN75, DN110 and strength will tend to crack and versus 100kPa). High ring better dissipation of heat
DN160 optional profiled rubber split when handled roughly or stiffness is an important generated by cables.
seals are available which are used when plate compactors are used consideration where conduits are
with the couplings to provide a during installation. Kabelflex has buried in areas with high UV Resistance
watertight connection resistant to a far superior impact strength to superimposed loads, for example Kabelflex is designed to be
a 2 metre head of water. Special uPVC sewer pipes especially at at road crossings. All buried cable buried underground, however, it
cutting tools are available for low temperatures, which means conduits should have a ring is UV resistant and can be
quick and accurate cutting of the easier handling and less stiffness of at least 450kPa. stored outdoors for up to one
conduit. breakages. **110mm pipe to SABS 791-1986 year.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
uPVC Kabelflex

product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 93
3
CABLE PROTECTION AND EQUIPMENT

FLEXIBLE CONDUIT AND ACCESSORIES


Couplings

Size
Type Description Product Code
(mm)

Nextube Coupling 50 K887

Nextube Coupling & Seal 75 K111

Nextube Coupling & Seal 110 K104

Nextube Coupling & Seal 160 K105

Bends

Size
Type Description Product Code
(mm)

Nextube Bend 50 K428

Nextube Bend 75 K425

Nextube Bend 110 K65

Nextube Bend 160 K538

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
94
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 95
3
CABLE ACCESSORIES

UNIVERSAL GLAND AND CABLE RATING CHART

Approximate dimensions and nett Clamp


Sustained current ratings Volt Drop To Suit
mass per 100m to Suit
Max overall Per
Rated area Number Nett mass In air Laid Direct In Ducts
diameter m/amp Size
of cores
(mm²) (mm) (kg) (amp) (amp) (amp) (mV)
1.5 2 14.0 39 23 29 23 29 0 E26
3 14.5 44 20 24 20 25 0 E27
4 15.5 49 20 24 20 25 0 E27
2.5 2 15 45 31 37 31 18 0 E27
3 15.5 50 26 32 26 15 0 E28
4 16.5 58 26 32 26 15 0-1 E28
4 2 17 59 41 50 41 11 0-1 E28
3 17.5 66 36 42 34 9.5 1 E28
4 18.5 77 36 42 34 9.5 1 E28
6 2 17.5 67 53 62 51 7.3 1 E28
3 18.5 78 45 53 43 6.4 1 E28
4 20.0 91 45 53 43 6.4 2 E30
10 2 21 89 72 83 68 4.4 2 E30
3 22 102 62 70 58 3.8 2 E30
4 23.5 120 62 70 58 3.8 2 E30
16 2 18.5 93 96 107 88 2.8 2 E30
3 20.5 114 82 91 75 2.4 2 E30
4 23 140 82 91 75 2.4 3 E32
25 2 21.5 120 128 142 116 1.75 2-3 E30
3 24.5 160 109 119 96 1.50 3 E32
4 27.5 200 109 119 96 1.50 3 E32
35 2 23 142 156 171 139 1.25 3 E30
3 27.5 200 133 143 116 1.10 3 E32
4 29.5 247 133 143 116 1.10 3-4 E34
50 3 29.5 250 162 169 138 0.81 4 E34
4 34 338 162 169 138 0.81 4 E34
70 3 33 344 205 210 171 0.57 4 E34
4 39.5 470 205 210 171 0.57 4-5 E35
95 3 38.5 482 252 251 205 0.43 4-5 E36
4 45 612 252 251 205 0.43 5 E36
120 3 42.5 590 291 285 234 0.35 5 E36
4 47 752 291 285 234 0.34 5 E38
150 3 45 705 334 320 263 0.29 5-6 E38
4 53 960 334 320 263 0.29 6 E40
185 3 52 910 383 361 298 0.25 6 E40
4 58 1150 383 361 298 0.25 6 E42

Note:
Cable Construction: Plain annealed stranded copper conductors, PVC insulated, PVC Bedded, Galvanised steel wire armoured, PVC Sheathed
(600/1000V). SABS 1507/1000

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
96
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

GLANDS, BOXES AND SHROUDS

BW
Captive Cone Gland TM
(For PVC SWA PVC Cable)
Size Model Product Code
0-20s 0503-0 H178
1-20 050301 H179
2-25 050302 H181
3-32 050303 H182
4-40 050304 H183
5-50 050305 H184
6-63 050306 H185
7-75 050307 H186
8-80 050308 H187
*9-90 050309 H188
*10-100 050310 H180
*11-110 050311 H4235
*12-120 050312 H4236
Features and Benefits
• For indoor and outdoor use.
• Two part handling, no loose parts.
• Freely rotating captive cone, providing an armour clamp and earth bond without
twisting the armouring.
• Precision manufactured from high quality brass (nickel plated) and available in
aluminium on request.
• Complete with high quality brass locknuts.

Neoprene Shroud
Size Model Product Code

0 1521-0 H416

1 152101 H417

2 152102 H418

3 152103 H419

4 152104 H420

5 152105 H421

6 152106 H422

7 152107 H423

PVC Shroud
Size Model Product Code
0 1522-0 H428

1 152201 H429

2 152202 H430

3 152203 H431

4 152204 H432

5 152205 H433

6 152206 H434

7 152207 H435

8 152208 H436

9 152209 H437

10 152210 H438

Note:
• Longer lead times apply to items marked with a (*) in the sizes column and need to be confirmed at the time the order is placed.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 97
3
CABLE ACCESSORIES

GLANDS, BOXES AND SHROUDS

A2
Compression Gland
(For Unarmoured Cable)
Size Model Product Code
00-20ss 053500 H198
0-20s 0535-0 H197
1-20 053501 H199
2-25 053502 H200
3-32 053503 H201
4-40 053504 H202
5-50 053505 H203
6-63 053506 H204
7-75 053507 H205
8-80 053508 H206
9-90 053509 H207
*10-100 053510 H4237
*11-110 053511 H4238
Features and Benefits
• For indoor and outdoor use.
• Seals the cable sheath to IP66/67/68.
• Specially formulated elastomeric seals.
• Wide sealing range.
• Precision manufactured from high quality brass (nickel plated) available in
aluminium or stainless steel on request.
• Complete with high quality brass (nickel plated) locknuts and IP gasket or high
temperature sealing gasket or o-ring.

IPlus TM
Corrosion Guard TM
(For PVC SWA PVC Cable)
Size Model Product Code
00-16ss 054600-16-IP H4239
00-20ss 054600-IP H4240
0-20s 0546-0-IP H2094
1-20 054601-IP H2095
2-25 054602-IP H2096
3-32 054603-IP H2097
4-40 054604-IP H2098
5-50 054605-IP H2099
6-63 054606-IP H4241
7-75 054607-IP H4242
Features and Benefits
• For highly corrosive and wet locations.
• Cable gland manufactured from high quality brass (nickel plated).
• The screw-on Corrosion Guard™ is manufactured from non-metallic material to
protect the steel wire armour and metal arts of the gland from corrosion.
• Provides sealing on inner and outer sheath of the cable sealing to IP66/68.
• Corrosion guard screws onto the gland body and seals over the outer sheath of the
cable giving an IP66/67/68 seal.
• Complete with high quality brass locknuts and polypropylene gasket.

Posi-Flex TM
Compression Gland TM
(For Unarmoured Cable)
Size Model Product Code
00-20ss 053800 H378
0-20s 0538-0 H377
1-20 053801 H379
2-25 053802 H380
3-32 053803 H381
4-40 053804 H382
Features and Benefits
• For use in highly corrosive areas.
• All brass parts encapsulated in a non-corrosive body.
• Wide sealing range.
• Complete with a fitted elastromeric seal to seal cable IP66/67/68.
• Supplied with a brass locknut and polypropylene gasket.

Note:
• Longer lead times apply to items marked with a (*) in the sizes column and need to be confirmed at the time the order is placed.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
98
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

GLANDS, BOXES AND SHROUDS

D1W
Captive Component Gland TM
(For PVC SWA PVC Cable)

Size Model Product Code


00-16ss 052000-16 H4244
00-20ss 052000 H4245
0-20s 0520-0 H4246
1-20 052001 H3228
2-25 052002 H3229
3-32 052003 H3230
4-40 052004 H3231
5-50 052005 H3232
6-63 052006 H3233
7-75 052007 H4247
8-80 052008 H4248
9-90 052009 H4249
Features and Benefits
• For indoor and outdoor use.
• Two piece handling, no loose parts.
• Freely rotating captive cone and cone ring, providing an armour clamp and earth
bond without twisting the armour wire.
• Factory fitted captive elastromeric inner seal for ingress protection IP66/67/68.
• Seals on the inner sheath of the cable.
• Precision manufactured from high quality brass (nickel plated).
• Complete with polypropelyne sealing gasket.

BarrierTex TM A
Barrier Gland
(For use with Unarmoured Cable)

Size Model Product Code


00-20ss 052500 H4258
0-20s 0525-0 H4259
1-20 052501 H4260
2-25 052502 H4261
3-32 052503 H4262
4-40 052504 H4263
5-50 052505 H4264
6-63 052506 H4265
Features and Benefits
• Provides a barrier seal between the individual cores of the cables.
• Inspectable compound chamber and flameproof chamber.
• Prevents explosive gasses propagating through a cable.
• prevents gas and moisture migrating through a cable.
• Precision manufactured from high quality brass (electroless nickel plated) and
stainless steel.

BarrierTex TM F
Barrier Gland
(For Unarmoured Cable)

Size Model Product Code


00-20ss 052600 H4243
0-20s 0526-0 H2539
1-20 052601 H4250
2-25 052602 H4251
3-32 052603 H4252
4-40 052604 H4253
5s-50s 052655 H4254
5-50 052605 H4255
6s-63s 052666 H4256
6-63 052606 H4257
Features and Benefits
• Provides a barrier seal between the individual cores of the cables.
• Inspectable compound chamber and flameproof chamber.
• Prevents explosive gasses propagating through a cable.
• prevents gas and moisture migrating through a cable.
• Precision manufactured from high quality brass (electroless nickel plated) and
stainless steel.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 99
3
CABLE ACCESSORIES

GLANDS, BOXES AND SHROUDS

FLP
Captive Component Gland
(For MAC - Multi Armour Cable)
Cable Details Max Hexagonal
Entry Thread
Gland Size (Dia) Length Details (Max)
Model Product Code
Reference Metic-NPT Min-Max Max
'D' 'E' 'Flats' 'Crns'
'C' 'A' 'B'
0521 - 00 00 - 20ss 052100-16 15 3.0 - 8.0 16.0 46 25 28 H10208
0521 - 0 0 - 20s 052100 15 8.0 - 11.5 16.0 46 25 28 H217
052101 1 - 20 0521-0 15 11.5 - 14.0 19.0 48 30 34 H218
052102 2 - 25 052101 15 14.0 - 20.5 26.5 60 42 48 H219
052103 3 - 32 052102 15 20.5 - 26.5 33.0 76 47 54 H220
052104 4 - 40 052103 20 26.5 - 32.5 40.5 84 60 69 H221
052155 5 - 50s 052104 20 32.5 - 38.0 46.0 90 74 85 H10209
052105 5 - 50 052155 20 38.0 - 44.5 52.0 90 74 85 H222
052165 6 - 63s 052105 20 44.5 - 50.0 60.0 96 85 98 H10210
052106 6 - 63 052165 20 50.0 - 56.0 67.0 96 85 98 H223
Features and Benefits
• Two part handling, freely rotating captive cone for earth continuity and armour clamping.
• Factory fitted with a specially formulated elastromeric seal provides built-in safety.
• No loose parts that can get lost.
• Manufactured from high quality brass, nickel plated and stainless steel.
• Complete with an orange thread cap/safety gauge for correct gland selection.

FLP Hose
Compression Gland
To Suit
Cable Details Hexagonal
Entry Thread Hoze
Gland Size (Dia) Details (Max)
Model Size Product Code
Reference
Metic-NPT 'B'
'D' Min-Max 'A' 'Flats' 'Crns'
'C' (mm)
0527-0 0-20s M20-½ 15 8.0 - 11.5 ½ - 13 25 28 H241
052701 1-20 M20-½/¾ 15 11.5 - 14.0 ¾ - 19 30 34 H3094
052702 2-25 M25-¾/1 15 14.0 - 20.5 1 - 25 42 48 H242
052703 3-32s M32-1/1¼ 15 20.0 - 26.5 1¼ - 32 47 54 H2544
052704 4-40 M40-1¼/1½ 20 26.5 - 32.5 1¼ - 38 60 69 H2545
Features and Benefits
• Fitted complete with a specially formulated elastromeric captive seal for built-in safety.
• Complete with a spigot to attache as hose for cable protection.
• Manufactured from high quality brass, nickel plated and stainless steel.
• Complete with an orange thread cap/safety gauge for correct gland selection.

FLP TR
Compression Gland
Max. Hexagonal
Entry Thread Cable Details
Gland Size Length Details (Max)
Model Product Code
Reference Metic-NPT
'D' Min-Max 'A' 'E' 'Flats' 'Crns'
'C'
042400 00-20ss M20 15 3.5 - 8.5 57 25 28 H244
0524-0 0-20s M20 15 8.0 - 11.5 57 25 28 H243
052401 1-20 M20 15 11.5 - 14.0 59 30 34 H245
052402 2-25 M25 15 14.0 - 20.5 71 42 48 H246
052403 3-32 M32 15 20.5 - 26.5 87 47 54 H247
052404 4-40 M40 20 26.5 - 32.5 96 60 69 H248
052455 5s-50s M50 20 32.5 - 38.0 112 74 85 H10219
052405 5-50 M50 20 38.0 - 44.5 112 74 85 H249
052465 6s-63s M63 20 44.5 - 50.0 124 85 98 H10220
052406 6-63 M63 20 50.0 - 56.0 124 85 98 H250
Features and Benefits
• Fitted complete with a specially formulated elastromeric captive seal for built-in safety.
• No loose parts that can get lost.
• Provided with an extra hard gripper seal to grip cable.
• Manufactured from high quality brass, nickel plated and stainless steel.
• Complete with an orange thread cap/safety gauge for correct gland selection.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
100
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

GLANDS, BOXES AND SHROUDS

D1EX
Captive Component Gland TM
(For use with Unarmoured Cable)
Size Model Product Code
00-16ss 051900-16 H4266
00-20ss 051900 H4267
0-20s 0519-0 H208
1-20 051901 H3227
2-25 051902 H3220
3-32 051903 H2720
4-40 051904 H2541
5-50 051905 H2542
6-63 051906 H4268
7-75 051907 H4269
8-80 051908 H4270
9-90 051909 H4271
10-100 051910 H4272
Features and Benefits
• For indoor and hazardous areas.
• Two part handling, no loose parts, freely rotating captice cone ring, providing
armour clamp and earth bond without twisting the armour wires.
• Factory fitted with a specially formulated elastrometric seal for built-in safety, seals
on the inner sheath of the cable.
• Precision manufactured from high quality brass (electrolesss nickel plated).
• Complete with polypropylene sealing gasket and an end cap/safety guage for
correct gland selection.

A2EX
Compression Gland TM
(For Unarmoured Cable)
Size Model Product Code
00-16ss 053600-16 H4273
00-20ss 053600 H172
0-20s 0536-0 H171
1-20 053601 H173
2-25 053602 H174
3-32 053603 H175
4-40 053604 H176
5-50 053605 H177
6-63 053606 H3136
7-75 053607 H3092
Features and Benefits
• For indoor, outdoor and hazardous areas with unfilled hygroscopic multicore cables.
• Prevents gas and moisture transmitting down cable.
• Prevents explosive gasses transmitting down cables.
• Precision manufactured from high quality brass (electroless nickel plated).

Ex Corrosion Guard TM
Cable Gland
(For use with Unarmoured Cable)
Size Model Product Code
00-16ss 054700-16 H4274
00-20ss 054700 H4275
0-20s 0547-0 H209
1-20 054701 H210
2-25 054702 H211
3-32 054703 H212
4-40 054704 H213
5-50 054705 H214
6-63 054706 H215
7-75 054707 H216
8-80 054708 H4276
9-90 054709 H4277
10-100 054710 H4278
Features and Benefits
• Provides a barrier seal between the individual cores of the cables.
• Inspectable compound chamber.
• Prevents explosive gasses propagating through a cable.
• prevents gas and moisture migrating through a cable.
• Precision manufactured from high quality brass (electroless nickel plated) with
screw on corrosion guard™.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 101
3
CABLE ACCESSORIES

GLANDS, BOXES AND SHROUDS

Posi Grip TM
Compression Gland
(For Unarmoured Cable)
Size Model Product Code
00-20ss 054500 H225
0-20s 0545-0 H224
1-20 054501 H226
2-25 054502 H227
3-32 054503 H228
4-40 054504 H229
5-50 054505 H230
6-63 054506 H231
7-75 054507 H232

Features and Benefits


• For use in highly corrosive and hazardous areas.
• Brass parts are encapsulated in a non-corrosive body
• Complete with a hard gripper seal, deluge proof O-ring and elastomeric inner seal
for complete ingress protection IP68.
• Complete with a polypropylene sealing gasket and an end cap/safety gauge for
correct gland selection.

Handi-Fit Box
4-Way / Y-Box
(For PVC SWA PVC Cable)
Size Model Product Code
4-Way
0 0650-0 H58
1 065001 H59
2 065002 H60
3 065003 H61
Y-Box
0 0651-0 H4279
1 065101 H55
2 065102 H56
3 065103 H57

Utility Box / Foundation Box


(General Purpose Junction Box)
Size Model Product Code
Utility Box
20mm 102101 H63
25mm 102102 H64
Foundation Box
20mm 102401 H2821
25mm 102402 H3241
Roof Box
Size Model Product Code

20mm 102700 H2252

Empty Posi Fit, Box


4-Way / Y-Box
(Hazardous Area Junction Box)
Size Model Product Code
4-Way
0 1003-0 H46
1 100301 H49
2 100302 H53
3 100303 H54
Y-Box
0 1009-0 H1425
1 100901 H2732
2 100902 H2483
3 100903 H2484
Features and Benefits

• Can be wired to your configuration for full creditation and certification

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
102
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

CABLE GLANDS
BWR Rotary Cone Glands

Type Benefits Sizes Features Product codew

0 H2742

1 H2743
• Rotary cone.
2 • High quality nickel plating. H2744
• To provide clamping of the
• Easy to install 3 armour wire for earth continuity H2745
(rotary cone) and mechanical retention of the
• Protects armour wire 4 cable. H2746
• May be used both indoors and
5 outdoors. H2747

6 H2748

7 H2749

BWL Loose Cone Glands

Type Benefits Sizes Features Product code

0 H2734

1 H2735

2 • Loose cone. H2736


• High quality nickel plating.
3 • To provide clamping of the armour H2737
• Easy to install (loose cone)
wire for earth continuity and
• Protects armour wire
4 mechanical retention of the cable. H2738
• May be used both indoors and
5 outdoors. H2739

6 H2740

7 H2741

A2 Compression Gland

Type Benefits Sizes Features Product code

00 H2750

0 H2751

1 H2752
• Novel seal design accomodates
• Easy to install (loose cone) 2 H2753
wide cable range.
• Displacement seal concept
• High quality nickel plating.
ensures effective seal to the 3 H2754
• May be used both indoors and
outer sheath
4 outdoors. H2755

5 H2756

6 H2757

7 H2758

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 103
3
CABLE ACCESSORIES

GLAND ACCESSORIS
Shrouds

PVC Shroud Rubber Shroud


Type
Size Product Code Size Product Code
0 H2763 0 H10225
1 H2764 1 H2929
2 H2765 2 H2930
3 H2766 3 H2931
4 H2767 4 H2932
5 H2768 5 H2933
6 H2769 6 H10226
7 H2770 7 H10227

Earth Tags

Slip-on Earth Tag


Type ØA ØB
Model Slip-Size Product Code
(mm) (mm)
ET0 0 20 6.8 H10228
ET1 1 20 6.8 H10229
ET2 2 25 6.8 H10230
ET3 3 32 6.8 H10231
ET4 4 40 6.8 H10232
ET5 5 50 10.5 H10233
ET6 6 63 10.5 H10234
ET7 7 75 10.5 H10235

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
104
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

UTILITY JUNCTION BOX

Total Outside Inside Gland Inside


Fixing Hole
Type Width Hight Height Size Width Product Code

A B C D E F G H

109 75 57 M20 94 122 96 6.9 H1451

135 85.5 69.5 M25 124 150 106 7 H10222

109 75 57 M20 94 122 96 6.9 H10223

135 85.5 59.5 M25 124 150 106 7 H10224

Dimensions Features and Benefits

• Manufacturedfrom high impact, corrosion and UVesistant material


• For use in general and industrial installations
• SABS 1222 IP66/68. (Dust and water tight)
• Allows for 1, 2, 3 and 4 way connections
• Blanking plugs, O-rings and lock nuts provided
• No need for drilling and tapping
• Internal earth plate provided (no exposed metal parts)
• Din rail mounting studs provided
• UJB1/2T - Special locking key to prevent unauthorised entry (optional)
• UBJ1/2C - UBJ1 with clear lid

GLANDS
PVC Glands
your electrical connection
Size Colour Product Code

Gland 00/0/1 UNI: 3-in-1 White H960

Gland 00/0/1 UNI: 3-in-1 Black H961

Gland 00/0/1 UNI: 3-in-1 Push in H1116

Gland PVC 0 White - Screw H263

Gland PVC 1 White - Screw H265

Gland PVC 2 White H3237

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 105
3
CABLE ACCESSORIES

REDUCERS AND ADAPTORS


Adaptors and Reducers

Metric Reducers
Thread
Type Size Product Code
M F
RM025M020S M25 M20 H390
RM032M020S M32 M20 H393
RM032M025S M32 M25 H1773
RM040M020S M40 M20 H396
RM040M025S M40 M25 H398
RM040M032S M40 M32 H400
RM050M020S M50 M20 H402
RM050M025S M50 M25 H404
RM050M032S M50 M32 H406
RM050M040S M50 M40 H408
RM063M032S M63 M32 H410
RM063M040S M63 M40 H412
RM063M050S M63 M50 H414

Metric Adaptors
Thread
Type Size Product Code
M F
AM020M025S M20 M25 H10168

AM025M032S M25 M32 H2477

AM032M040S M32 M40 H10169

AM040M050S M40 M50 H10170

AM050M063S M50 M63 H10171

AM063M075S M63 M75 H10172

Ex Adaptors and Reducers

Metric Reducers
Thread
Type Size Product Code
M F
RM025M020E M25 M20 H391
RM032M020E M32 M20 H394
RM032M025E M32 M25 H395
RM040M020E M40 M20 H397
RM040M025E M40 M25 H399
RM040M032E M40 M32 H401
RM050M020E M50 M20 H403
RM050M025E M50 M25 H405
RM050M032E M50 M32 H407
RM050M040E M50 M40 H409
RM063M032E M63 M32 H411
RM063M040E M63 M40 H413
RM063M050E M63 M50 H415

Metric Adaptors
Thread
Type Size Product Code
M F
AM020M025E M20 M25 H37

AM025M032E M25 M32 H2475

AM032M040E M32 M40 H10173

AM040M050E M40 M50 H2166

AM050M063E M50 M63 H10174

AM063M075E M63 M75 H10175

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
106
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

JOINT KITS
Scotchcast Resin Type Joints

In-Line Splices

Min. Cable O.D Max. Cable O.D Cable Conductor Size


Type Product Code
(mm) (mm) (mm²)
Scotchcast 82 Splicing Kits

Scotchcast 82-A1 7 16 2,5 -4 H277

Scotchcast 82-A2 14 28 6-16 H278

Scotchcast 82-A3 17 40 25-35 H279

Scotchcast 91 Splicing Kits

Scotchcast 91-A1 8 28 4-10 H280

Scotchcast 91-A2 14 32 16-25 H281

Scotchcast 91-A3 23 39 35-50 H282

Scotchcast 91-A4 28 51 70 H283

Scotchcast 91-A4.5 30 55 95 H715

Scotchcast 91-A5 45 70 120-150 H284

Scotchcast 91-A6 48 86 185-240 H285

Electrical Insulating Resins

Type Size Product Code

Scotchcast Electrical Insulating Resins


4SA Epoxy Resin in Unipak Bag A/90cm³ H2810
4SA Epoxy Resin in Unipak Bag B/209cm³ H276
4SA Epoxy Resin in Unipak Bag C/418cm³ H3189

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 107
3
CABLE ACCESSORIES

JOINT KITS
Flame Retardant Splicing Kits

Low Tension Splicing Kits with Flame Retardant Mould and Flame Retardant non Halogenated Clear Epoxy Resin No. 52FR

Type Size Product Code


(8mm - 28mm)
91-A1/W H3102
4 - 10mm²
(14mm - 32mm)
91-A2/W H3103
16 - 25mm²
(23mm - 39mm)
91-A3/W H3104
35 - 50mm²
(28mm - 52mm)
91-A4/W H3106
70mm²
(30mm - 55mm)
91-A4,5/W H3105
95mm²
(45mm - 70mm)
91-A5/W H10427
120 - 150mm²
(45mm - 70mm)
91-A5/WE with Earthing Kit H10428
120 - 150mm²
(48mm - 79mm)
91-A6/W H10429
185 - 240mm²

MV Termination Kits

Medium Voltage
Cable Size
Type Kit Reference Product Code
(mm)
3 Core 11kV Heat Shrink Splicing Kits
PILC 35-95 HPJ-1 H10395

PILC 120-185 HPJ-2 H10396

PILC 240-300 HPJ-3 H10397

XLPE 16-36 HXJ-1 H10398

XLPE 50-95 HXJ-2 H10399

XLPE 120-185 HXJ-3 H10400

XLPE 240-300 HXJ-4 H10401

3 Core 11kV Heat Shrink Splicing Kits

Indoor Outdoor
Cable Size
Type (450, 750mm Tails) (750, 1200, 1600mm Tails)
(mm) Kit Reference Product Code Kit Reference Product Code
PILC 35-95 HPTI-1 - HPTO-1 H10402

PILC 120-185 HPTI-2 - HPTO-2 H10403

PILC 240-300 HPTI-3 - HPTO-3 H10404

XLPE 16-36 HPTI-1 - HPTO-1 H10405

XLPE 50-95 HPTI-2 - HXTO-1 H10406

XLPE 120-185 HPTI-3 - HXTO-2 H10407

XLPE 240-300 HPTI-4 - HXTO-3 H10408

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
108
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

JOINT KITS
Cable Tape Splicing Kits

Cable Tape Splicing Kits

Size
Type Product Code
(mm2)
Scotchcast 6.6kV Cable Splicing Kits
92-A5 PILC Cable 16 - 50 H3108
92-A5X XLPE Cable 16 - 50 H10458

Scotchcast 11kV Cable Splicing Kits


Poured Resin Joints, No. 460M Polyurethane
92-A11-6 PILC Cable 16 - 150 H3071
92-A11-X6 XLPE Cable 16 - 150 H1724

Low Voltage Cable Joint


Information:
your electrical connection
Epoxy resins
IEC / SANS approved

Size
Type Product Code
(mm)
GPJ0 1,5-4 H2802
GPJ1 4,0-10 H2803
GPJ2 10-16 H2804
GPJ2H 16-35 H290

GPJ3 35-50 H291

GPJ3H 50-95 H292

GPJ4 95-150 H293

GPJ5 150-240 H294

GPJ6 240-300 H4234

Duracast Resin Cable Joint Kits

Size
Type Product Code
(mm)
Dura Joint P0 - S 1.5 - 4 x 4C H268
Dura Joint P1 - S 4.0 - 10 x 4C H269
Dura Joint P2.5 - S 16 - 35 H270
Dura Joint P2 - S 10 - 16 x 4C H271
Dura Joint P3 - S 35 - 50 H273
Dura Joint P3.5 - S 50 - 95 H272
Dura Joint P4 - S 95 - 150 H274
Dura Joint P5 - S 150 - 240 H275

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 109
3
CABLE ACCESSORIES

LUGS AND FERRULES


Copper Lugs for Stranded Conductor Cable
Dimension
F
1. The nominal area of the circular stranded
conductor is that of the nominal lug or ferrule size.
2. For flexible cables the next highest lug or
ferrule size in relation to the area must be used.
3. For compacted cable the heavy duty lugs and C D E
ferrules must be used.

Certain compacted cables vary in nominal diameter


and cable diameter must be matched to the lug or
ferrule barrel inside diameter.
B A

Typical Conductors Nominal Dimensions Product Code


Nominal (mm)
Circular Flexible Stud Size
Lug Size
Stranded Stranded Barrel Spade

A B C D E F
(mm2) (mm) (mm2) (mm)
I.D O.D Length Length Hole Pos. Width
3 9,0 4,5 7,0 H10283 H964 -
4 12,0 4,5 7,0 H10284 H966 H2551
1,5 3/0,81 1 1,9 3,8 7,0
5 12,0 4,5 8,0 H10285 H967 H2552
6 13,0 5,5 9,0 H10286 H968 H2553
3 8,5 4,5 7,0 H10287 H969 -
4 12,0 4,5 7,0 H10288 H971 H2554
2,5 3/1,04 1,5 5 2,4 3,9 7,3 12,0 4,5 9,0 H10289 H972 H2555
6 13,0 5,5 9,5 H10290 H973 H2556
8 15,0 7,5 12,0 H10291 H975 H2557
3 9,0 4,5 7,0 H10292 H976 -
4 12,0 4,5 7,0 H10293 H977 H2559
5 8,0 12,0 4,5 8,5 H10294 H978 H2560
4 7/0,86 2,5 2,8 4,7
6 13,0 5,5 10,0 H10295 H979 H2561
8 17,0 6,5 13,0 H10296 H980 H2562
10 11,0 19,0 7,5 14,0 H10297 H981 H2563
4 12,0 4,5 7,5 H10298 H2857 H2564
5 12,0 4,5 8,5 H10299 H982 H2565
6 7/1,05 4 6 3,4 5,3 8,5 13,0 5,5 9,5 H10300 H983 H2566
8 9,3 17,0 7,0 13,0 H10301 H984 H2567
10 11,0 19,0 7,5 15,0 H10302 H985 -
5 10,5 12,0 4,5 9,0 H10303 H987 H2568
6 10,5 13,0 6,0 10,0 H10304 H988 H2569
10 7/1,36 6 8 4,4 6,3 11,0 17,0 7,5 13,0 H10305 H989 H2570
10 11,0 19,0 7,5 15,0 H10306 H990 H2571
12 12,0 20,0 10,0 19,0 H10307 H991 H2572
5 13,0 5,5 10,5 H10308 H993 H2574
6 13,0 5,5 11,0 H10309 H994 H2575
8 5,5 7,6 12,0 18,0 7,5 13,0 H10310 H995 H2576
16 7/1,72 10
10 20,0 7,5 15,0 H10311 H996 H2577
12 25,0 10,5 18,0 H10312 H997 H2578
16 27,0 13,0 24,0 H10313 H998 H2579
6 16,0 6,0 14,0 H10314 H999 H2581
18/1,35
8 17,0 8,0 14,0 H10315 H1000 H2582
25 16 10 6,9 9,0 15,0 18,0 8,0 16,0 H10316 H1001 H2583
19/1,55 12 21,0 11,0 18,0 H10475 H1002 H2584
16 27,0 13,0 24,0 H10317 H338 -

Items above with (-) in the codes column are available on special request.
Note:
• Indent compression recommended for flexible stranded.
• Confirm stock and brand availability with your local branch.

Components are tested to IEC 61238-1.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
110
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

LUGS AND FERRULES


Copper Lugs for Stranded Conductor Cable

Typical Conductors Nominal Dimensions Product Code


Nominal Lug (mm)
Circular Flexible Stud Size
Size
Stranded Stranded Barrel Spade

A B C D E F
(mm2) (mm) (mm2) (mm) Hole
I.D O.D Length Length Width
Pos.
6 15,0 18,0 8,0 16,0 H10318 H1003 H2585
18/1,59
8 15,0 18,0 9,0 16,0 H10319 H1004 H2586
35 25 10 8,2 10,7 15,0 18,0 9,0 16,0 H10320 H1005 H2587
19/1,55 12 15,0 22,0 10,0 18,0 - H1006 H2588
16 16,0 30,0 13,0 24,0 H10321 H1007 H2589
6 16,0 17,0 8,0 18,0 H10322 H1008 H2590
8 16,0 17,0 9,0 18,0 H10323 H1009 H2591
10 17,0 24,0 10,0 20,0 H10324 H1010 H2592
50 18/1,9 35
19/1,85 12 10,0 12,8 18,0 24,0 10,0 20,0 - H1012 H2593
16 18,0 30,0 13,0 26,0 H10325 H1013 H2594
20 18,0 30,0 13,0 26,0 H10326 H3266 -
8 20,5 20,0 9,5 21,0 H10327 H1014 H2597
10 21,0 26,0 11,0 22,0 H10328 H1015 H2598
18/2,25
70 50 12 11,7 15,0 21,0 28,0 12,0 22,0 H10329 H1017 H2599
19/2,19
16 22,0 32,0 14,0 28,0 - H1018 H1342
20 22,0 34,0 15,0 30,0 H10330 H1175 H2600
8 24,0 9,5 25,0 H10331 H1019 H2601
10 26,0 13,0 26,0 H10332 H1020 H2602
36/1,86
95 70 12 13,5 17,4 23,0 28,0 13,0 26,0 H10333 H1022 H2603
37/1,83
16 32,0 14,0 28,0 - H1023 H2604
20 36,0 16,0 30,0 H10334 H1176 H2605
10 26,0 12,0 27,0 H10335 H1024 H2606
36/2,08
12 28,0 12,0 28,0 H10336 H1025 H2607
120 70/95
16 15,5 19,8 26,0 32,0 14,0 30,0 H10337 H1026 H2608
37/2,05
20 36,0 16,0 32,0 H10338 H2861 -
10 31,0 12,5 31,0 H10339 H1027 H2609
36/2,34
12 33,0 16,0 32,0 H10340 H1028 H2610
150 95/120
16 17,0 22,0 27,0 35,0 16,0 32,0 H10341 H1029 H1343
37/2,29
20 36,0 16,0 32,0 H10342 H1030 H2661
10 29,0 12,5 34,0 H10343 H1031 H2611
36/2,59
12 31,0 16,0 34,0 H10344 H1032 H2612
185 120/150
16 19,0 24,4 29,0 34,0 16,0 36,0 H10345 H1033 H2613
37/2,53
20 H10346 H1179 -
10 36,0 16,0 40,0 H10347 H1180 H2614
60/2,23
12 36,0 16,0 40,0 H10348 H1034 H2615
240 150/185
16 21,5 27,7 33,0 38,0 20,0 40,0 H10349 H1884 H2616
61/2,26
20 42,0 20,0 40,0 H10350 H3267 H2617

10 35,0 15,0 45,0 H10351 H3268 -

60/2,55 12 24,5 31,3 35,0 35,0 15,0 45,0 H10352 H1289 H2618
300 185/240
61/2,53 16 45,0 15,0 45,0 H10353 H367 -
20 45,0 16,0 45,0 H10354 H2863 H2619
47,0 49,0 - H4281 -
400 91/2,39 240/300 16 27,5 35,6 41,0
47,0 24,0 51,0 - H4280 H368
500 91/2,67 300/400 31,6 40,0 41,5 54,0 58,0 H369 H4282 -
630 127/2,54 400/500 34,5 44,6 53,0 65,0 64,0 H370 H4283 -
800 127/2,87 630 40,0 51,2 68,0 75,0 73,0 - H4284 -
1000 127/3,22 44,0 56,6 75,0 75,0 81,0 - H4285 -

Items above with (-) in the codes column are available on special request.
Note:
• Indent compression recommended for flexible stranded.
• Confirm stock and brand availability with your local branch.

Components are tested to IEC 61238-1.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 111
3
CABLE ACCESSORIES

LUGS AND FERRULES


Heavy Duty Copper Lugs for Compacted XLPE Cable 6.35 - 11kV
F

C R1 D E

B A

Nominal Dimensions
Nominal Lug SANS (mm)
Stud Size
Size 1411-1
Barrel Spade Product
Nominal
Code
Diameter
A B C D E F
Over Cond.
(mm2) (mm)
I.D O.D Length Length Hole Pos. Width

35 7,0 10 7,30 10,50 16,0 24,0 11,0 19,0 H4130


50 8,2 10 8,75 12,30 20,0 24,0 11,0 19,0 H4131
70 9,7 10 10,40 14,60 21,0 27,0 14,0 20,0 H4132
95 11,4 10 12,10 17,00 24,0 28,0 14,0 24,0 H4133
120 12,6 12 14,00 19,10 26,0 28,0 14,0 26,0 H4134
150 14,6 12 15,25 21,30 31,0 37,0 18,0 30,0 H4135
185 15,9 12 17,00 23,70 34,0 40,0 19,0 33,0 H4136
240 16,3 12 20,00 27,10 34,0 41,0 19,0 37,0 H4137
300 20,8 * 21,63 30,50 38,0 48,0 20,0 42,5 H4138
400 23,6 * 24,50 34,64 51,0 49,0 23,5 48,0 H4139
500 26,2 * 28,50 38,90 51,0 52,0 25,0 54,0 H4140
630 30,3 * 33,00 45,00 53,0 65,0 28,0 64,0 H4141

Note:
* Stud sizes can be made to customer requirements.

Components are tested to IEC 61238-1.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
112
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

LUGS AND FERRULES


Aluminium Stranded Circular Cable Lugs

Palm
Cable Stud SIze Palm Thick
width Product
A B C D E d1 d2
Code
(mm2) (mm) "F" "G"
8 8,40 H4158
15,00 4,00
25 10 65,00 28,00 10,40 17,00 12,00 7,00 11,30 H4159
12 12,50 21,00 3,00 H4160
8 8,40 H4161
17,50 4,00
35 10 70,00 30,00 10,40 17,00 12,00 8,30 12,90 H4162
12 12,50 21,00 3,50 H4163
10 10,40 H4164
20,00 4,50
50 12 70,0 32,00 12,50 17,00 12,00 9,90 14,70 H4165
16 16,50 26,00 3,50 H4166
10 10,40 H4167
23,00 5,00
70 12 78,00 36,00 12,50 17,00 12,00 11,70 17,00 H4168
16 16,50 26,00 4,50 H4169
10 10,40 H4170
95 12 85,00 39,00 12,50 18,00 12,00 27,50 5,50 13,70 19,70 H4171
16 16,50 H4172
10 10,40 H4173
120 12 89,00 45,00 12,50 17,00 12,00 31,00 6,50 15,30 22,20 H4174
16 16,50 H4175
12 12,50 H4176
150 16 100,00 48,00 16,50 20,00 16,00 34,50 7,00 17,20 24,70 H4177
20 20,50 H4178
12 12,50 H4179
185 16 108,00 53,00 16,50 20,00 16,00 38,00 7,50 19,00 27,30 H4180
20 20,50 H4181
240 118,00 57,00 22,00 18,00 43,50 8,50 21,80 31,00 H4182
On request On request
300 132,00 62,00 25,00 20,00 49,00 9,50 24,90 35,00 H4183

Note:
Components are tested to IEC 61238-1.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 113
3
CABLE ACCESSORIES

LUGS AND FERRULES


Aluminium 3 Core Sector Shaped Cable Lugs

Palm
Cable Stud SIze Palm Thick
width Product
A B C D E d1 d2
Code
(mm2) (mm) "F" "G"

8 8,40 H4184
15,00 4,00
25 10 65,00 28,00 10,40 17,00 12,00 5,20 8,73 H4185
12 12,50 21,00 3,00 H4186
8 8,40 H4187
17,50 4,5
35 10 70,00 30,00 10,40 17,00 12,00 5,90 10,05 H4188
12 12,50 21,00 3,50 H4189
10 10,40 H4190
22,00 4,50
50 12 70,00 32,00 12,50 17,00 12,00 7,25 11,85 H4191
16 16,50 26,00 3,50 H4192
10 10,40 H4193
24,00 5,00
70 12 78,00 36,00 12,50 17,00 12,00 8,5 14,10 H4194
16 16,50 26,00 4,50 H4195
10 10,40 H4196
95 12 82,00 38,00 12,50 18,00 12,00 28,00 6,00 9,55 16,35 H4197
16 16,50 H4198
10 10,40 H4199
120 12 88,00 45,00 12,50 17,00 12,00 31,00 6,50 11,05 18,50 H4200
16 16,50 H4201
12 12,50 H4202
150 16 103,00 48,00 16,50 20,00 18,00 34,00 7,00 12,15 20,60 H4203
20 20,50 H4204
12 12,50 H4205
185 16 106,00 53,00 16,50 20,00 18,00 38,00 8,50 13,40 22,48 H4206
20 20,50 H4207
240 118,00 57,00 22,00 18,00 43,50 8,50 15,55 26,05 H4208
On request On request
300 132,00 62,00 25,00 20,00 49,00 10,00 17,35 29,00 H4209

Note:
Components are tested to IEC 61238-1.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
114
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

LUGS AND FERRULES


Aluminium 4 Core Sector Shaped Cable Lugs

Palm
Cable Stud SIze Palm Thick
width Product
A B C D E d1 d2
Code
(mm2) (mm) "F" "G"

8 8,40 H4210
15,00 4,00
25 10 65,00 25,00 10,40 17,00 12,00 5,80 7,88 H4211
12 12,50 21,00 3,00 H4212
8 8,40 H4213
17,50 4,5
35 10 70,00 30,00 10,40 17,00 12,00 7,10 9,70 H4214
12 12,50 21,00 3,50 H4215
10 10,40 H4216
20,00 4,50
50 12 70,00 32,00 12,50 17,00 12,00 8,35 10,95 H4217
16 16,50 26,00 3,00 H4218
10 10,40 H4219
23,00 5,00
70 12 78,00 36,00 12,50 17,00 12,00 9,30 13,00 H4220
16 16,50 26,00 4,50 H4221
10 10,40 H353
95 12 85,00 39,00 12,50 18,00 12,00 27,50 5,70 10,85 15,10 H1021
16 16,50 H4222
10 10,40 H4223
120 12 89,00 45,00 12,50 17,00 12,00 31,00 6,50 12,05 17,00 H4224
16 16,50 H4225
12 12,50 H4226
150 16 100,00 48,00 16,50 20,00 16,00 34,50 7,20 13,80 18,80 H4227
20 20,50 H4228
12 12,50 H363
185 16 108,00 53,00 16,50 20,00 16,00 38,50 8,00 15,25 21,00 H4229
20 20,50 H4230
240 118,00 57,00 22,00 18,00 43,50 8,50 17,35 23,80 H4231
On request On request
300 132,00 62,00 25,00 20,00 49,00 9,70 19,50 26,40 H4232

Note:
Components are tested to IEC 61238-1.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 115
3
CABLE ACCESSORIES

LUGS AND FERRULES


Copper Ferrules for Stranded Conductor Cable

B A

Nominal Dimensions Product Code


Typical
Nominal Sleeve Size (mm) Conductors
Circular Stranded
I.D O.D Length

(mm2) A B C (mm)

1,5 1,9 3,6 13,0 3/0,81 H10367 H121 H2514

2,5 2,4 3,9 14,0 3/1,04 H10368 H124 H2515

4 2,8 4,7 16,0 7/0,86 H10369 H126 H2516

6 3,4 5,3 18,0 7/1,05 H10370 H129 H2517

10 4,4 6,3 20,0 7/1,36 H10371 H131 H2518

16 5,5 7,6 22,0 7/1,72 H10372 H133 H2519

25 6,9 9,0 25,0 18/1,35 H2174 H137 H2520

35 8,2 10,7 28,0 18/1,59 H2175 H141 H2521

50 10,0 12,8 31,0 18/1,90 H2176 H144 H2522

70 11,7 15,0 35,0 18/2,25 H23 H147 H2523

95 13,5 17,4 39,0 36/1,86 H2928 H151 H2524

120 15,5 19,8 43,0 36/2,08 H2177 H155 H2525

150 17,0 22,0 48,0 36/2,34 H2178 H159 H2526

185 19,0 24,4 54,0 36/2,59 H10373 H162 H2527

240 21,5 27,7 60,0 60/2,23 H10374 H165 H2528

300 24,5 31,3 67,0 60/2,55 H10375 H167 H2529

400 27,5 35,6 80,0 91/2,39 H10376 H3265 H2530

500 31,6 40,0 90,0 91/2,67 H10377 H4154 -


630 34,5 44,6 110,0 127/2,54 H10378 H4155 -
800 40,0 51,2 130,0 127/2,87 H10379 H4156 -
1000 44,0 56,6 154,0 127/3,22 H10380 H4157 -

Heavy Duty Copper Ferrules for Compacted XLPE Cable 6.35 - 11kV

Nominal Dimensions
Nominal Ferrule Size (mm)
Product Code
I.D O.D Length
(mm2) A B C
35 7,30 10,5 38 H4142
50 8,75 12,3 42 H4143
70 10,40 14,6 43 H4144
95 12,10 17,0 45 H4145
120 14,00 19,1 55 H4146
150 15,25 21,3 58 H4147
185 17,00 23,7 64 H4148
240 20,00 27,1 70 H4149
300 21,63 30,5 75 H4150
400 24,50 34,6 80 H4151
500 28,50 38,9 90 H4152
630 33,00 45,0 100 H4153

For items marked with a dash (-) please enquire at branch or reference website
Note:
Components are tested to IEC 61238-1.
For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
116
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

LUGS AND FERRULES


Aluminium Ferrules
A

Stranded 3 Core 4 Core

Stranded 3 Core 4 Core


Cable A
Product Product Product
D1 D2 H W H W
(mm2) (mm) Code Code Code
25 66 7,00 11,30 H135 5,20 8,73 H4286 5,8 7,88 H4296
35 70 8,30 12,90 H139 10,05 5,90 H4287 7,10 9,70 H4297
50 74 9,90 14,70 H142 11,85 7,25 H4288 8,35 10,95 H4298
70 78 11,70 17,00 H145 14,10 8,25 H4289 9,30 13,00 H4299
95 84 13,70 19,70 H149 16,35 9,55 H4290 10,85 15,10 H4300
120 91 15,30 22,20 H153 18,50 11,05 H4291 12,50 17,00 H4301
150 102 17,20 24,70 H157 20,60 12,15 H4292 13,80 18,80 H4302
185 108 19,00 27,30 H160 22,40 13,40 H4293 15,25 21,00 H4303
240 118 21,80 31,00 H163 26,05 15,55 H4294 17,35 23,80 H4304
300 130 24,90 35,00 H4233 29,00 17,35 H4295 19,50 26,40 H4305

Note:
Components are tested to IEC 61238-1.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 117
3
CABLE ACCESSORIES

PRE-INSULATED TERMINALS
Insulated Ring Terminals

Wire Range Stud Size Dimensions


W Model Colour Product Code
(mm2) (mm) W L F
1R3 3,2 5,5 17,5 5,0 H526
1R4 4,3 8,0 20,5 7,0 H527
1R5 5,3 8,0 20,5 7,0 H528
0,25 - 1,65 Red
1R6 6,4 11,6 26,8 11,0 H529
1R8 8,4 11,6 26,8 11,0 H530
1R10 10,5 13,6 30,5 13,9 H525
2R35 3,7 6,6 17,8 6,6 H532
F
F 2R4 4,3 8,5 21,8 8,5 H533
L
L 2R5 5,3 9,5 21,8 9,5 H534
1,04 - 2,63 Blue
2R6 6,4 12,0 26,8 11,0 H535
2R8 8,4 12,0 26,8 11,0 H536
2R10 10,5 13,6 30,5 13,9 H531
3R35 3,7 7,2 22,7 6,1 H539
3R4 4,3 9,5 26,6 9,1 H540
3R5 5,3 9,5 26,6 9,1 H541
3R6 2,63 - 6,64 Yellow 6,4 12,0 29,5 10,5 H542
3R8 8,4 15,0 34,0 13,5 H543
3R10 10,5 15,0 34,0 13,5 H537
3R12 12,0 19,2 38,6 16,0 H538

Insulated Spade Terminals

Wire Range Stud Size Dimensions Product


W
W Model Colour
Code
(mm2) (mm) W L F
1S35 3,7 6,4 21,0 6,5 H306
1S4A 4,3 6,4 21,0 6,5 H307
0,25 - 1,65 Red
1S5A 5,3 8,1 21,0 6,5 H308
F
F
1S6A 6,4 9,5 21,0 6,5 H309
2S35 3,7 6,0 21,0 6,5 H310
L
L
2S4A 4,3 6,4 21,0 6,5 H311
1,04 - 2,63 Blue
2S5A 5,3 7,9 21,0 6,5 H312
2S6A 6,4 9,3 21,0 6,5 H313
3S4A 4,3 8,3 25,5 7,0 H314
3S5 2,63 - 6,64 Yellow 5,3 9,0 25,5 7,0 H315
3S6A 6,4 9,0 25,5 7,0 H316

Insulated Pin Terminals

W Wire Range Dimensions Product


W Model Colour
Code
(mm2) W L F

1P10 0,25 - 1,65 Red 1,9 19,8 10,0 H371


FF

2P10 1,9 19,8 10,0 H372


LL
1,04 - 2,63 Blue

2P12 1,9 21,8 12,0 H1035

3P13 2,63 - 6,64 Yellow 2,8 27,0 13,0 H373

Note: 0,5 - 1,5mm2 - 19Amp 600V


• Lead times need to be confirmed at the time the order is placed. 1,5 - 2,5mm2 - 27Amp 600V
4,0 - 6,0mm2 - 48Amp 600V

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
118
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

PRE-INSULATED TERMINALS
Insulated Ferrules

CC Wire Range Dimensions Product


Model Colour
Code
(mm2) D C L

1UT 0,25 - 1,65 Red 4,0 1,7 24,6 H120

LL
2UT 1,04 - 2,63 Blue 4,5 2,3 24,6 H123

3UT 2,63 - 6,64 Yellow 6,3 3,4 26,5 H128


D
D

Insulated Blade Terminals

W
W Wire Range Dimensions Product
Model Colour
Code
(mm2) W L F
1FB10 2,3 19,8 10,0 H512
1FB11 3,0 20,8 11,0 H513
F
F 0,25 - 1,65 Red
1FB14 3,0 23,8 14,0 H514
1FB18 2,2 27,8 18,0 H515
LL
2FB9 2,8 18,8 9,0 H516
1,04 - 2,63 Blue
2FB18 2,2 27,8 18,0 H517
3FB10 2,8 23,0 10,0 H519
2,63 - 6,64 Yellow
3FB14 4,5 27,0 14,0 H520

Insulated Hook Blade Terminals

W
W Wire Range Dimensions Product
Model Colour
Code
(mm2) W L F
1HB3 3,0 27,2 16,8 H522
0,25 - 1,65 Red
F
F 1HB 4,6 27,2 16,8 H521

LL
2HB 1,04 - 2,63 Blue 4,6 27,2 16,8 H523

3HB 2,63 - 6,64 Yellow 4,6 30,2 17,2 H524

Insulated Male Disconnects

W W Wire Range Dimensions Product


Model Colour
Code
(mm2) W L F
F F 1DM4 4,8 19 6,5 A8478
0,25 - 1,65 Red
1DM 6,35 21 7,7 H504
L L 2DM4 4,8 10 6,5 H9960
1,04 - 2,63 Blue
2DM 6,35 21 7,7 H508

3DM 2,63 - 6,64 Yellow 6,35 24 7,7 H511

Note:
• Lead times need to be confirmed at the time the order is placed.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 119
3
CABLE ACCESSORIES

PRE-INSULATED TERMINALS
Insulated Female Disconnects

W
W Wire Range Dimensions Product
Model Colour
Code
(mm2) W L F
F
F 1DF2 3,2 18,6 6,5 H503
1DF4 0,25 - 1,65 Red 5,0 19,0 6,4 H10249
1DF 6,6 20,5 7,3 H502
LL 2DF4 5,0 19,0 6,4 H507
2DF 1,04 - 2,63 Blue 6,6 20,5 7,3 H506
2DF9 10,0 25,5 12,0 H10250
3DF 6,6 23,5 7,3 H510
2,63 - 6,64 Yellow
3DF9 10,0 28,5 12,0 H10251

Fully Insulated Female Disconnects

Wire Range Dimensions Product


W
W Model Colour
Code
(mm2) W L F
F1DF2 3,8 19,0 6,4 H10252
FF
F1DF4 0,25 - 1,65 Red 5,0 19,3 6,4 H10253
F1DF 6,6 22,0 7,3 H10254
L
L
F2DF4 5,0 19,3 6,4 H10255
1,04 - 2,63 Blue
F2DF 6,6 22,0 7,3 H10256
F3DF 6,6 24,0 7,3 H10257
2,63 - 6,64 Yellow
F3DF9 10,0 28,5 12,0 H10258

Insulated Piggy Back Disconnects

Wire Range Dimensions Product


W
W Model Colour
Code
(mm2) W L F
F
F
1PB 0,25 - 1,65 Red 6.6 22.0 8.0 H2330
LL

2PB 1,04 - 2,63 Blue 6.6 22.0 8.0 H2329

Insulated Male Bullet Disconnects

W
W Wire Range Dimensions Product
Model Colour
Code
(mm2) W L F

F
F 1ULM4 0,25 - 1,65 Red 4,0 21,5 8,5 H2303

LL 2ULM4 1,04 - 2,63 Blue 4,0 21,5 8,5 H2305

3ULM4 4,0 24,0 8,5 -


2,63 - 6,64 Yellow
3ULM5 5,0 24,0 8,5 H9449

Items above with (-) in the codes column are available on special request.
Note:
• Lead times need to be confirmed at the time the order is placed.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
120
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

PRE-INSULATED TERMINALS
Insulated Female Bullet Disconnects

Wire Range Dimensions Product


W
W Model Colour
Code
(mm2) W L F

FF 1ULF4 0,25 - 1,65 Red 3,9 21,5 7,3 H2302

LL 2ULF4 3,9 25,5 7,3 H2304


1,04 - 2,63 Blue
2ULF5 5,9 25,5 7,0 -

3ULF4 2,63 - 6,64 Yellow 4,9 24,5 7,0 H9491

0.5 - 1,5mm2 - 19Amp 600V 1.5 - 2,5mm2 - 27Amp 600V 4 - 6mm2 - 48Amp 600V

Quick Splice Connectors

Wire Range Dimensions Product


Model Colour
Code
(mm2) W L

1QS 0,25 Red 20,0 27,0 H387

LL 2QS 2,0 Blue 20,0 27,0 H388


W
W

3QS 5,5 Yellow 20,5 34,5 H74

Insulated Female Disconnects

Dimensions
E - Insulated Wire Range Product
Model (mm)
Code
D (mm2) Colour L F W B C D
D C

C
E0510 0.5 White 10.0 16.0 2.6 6.0 1.0 1.3 H111

E0710 0.75 Blue 10.0 16.3 3.0 6.3 1.2 1.5 H112

L E01010 1.0 Red 10.0 16.3 3.0 6.3 1.4 1.7 H113
L

F
F

E01510 1.5 Black 10.0 16.4 3.5 6.3 2.0 1.7 H114

E02512 2.5 Grey 12.0 19.4 4.0 7.4 2.3 2.6 H116
W
W

E4012 4.0 Orange 12.0 19.4 4.5 7.4 2.8 3.2 H117

B E6012 6.0 Green 12.0 20.5 6.0 8.5 3.5 3.9 H118
BW

W
E10012 10.0 Brown 12.0 20.8 7.5 8.8 4.5 4.9 H10261

Items above with (-) in the codes column are available on special request.
Note:
• Lead times need to be confirmed at the time the order is placed.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 121
3
CABLE ACCESSORIES

BRASS TERMINALS
Uninsulated Disconnect - Female

Wire Range Dimensions


C
C Model Product Code
(mm2) L C W

W
W UDF 19.0 7.5 6.6 H3078

LL 0.5 - 2.0

UDF 2 16.0 6.4 3.2 H9908

Uninsulated Disconnect - Male

Wire Range Dimensions


C Model Product Code
(mm2) L C W

W
W

0.5 - 2.0
UDM 20.0 7.5 6.3 H7479
L
L

Note:
• Lead times need to be confirmed at the time the order is placed.

PRE-INSULATED TERMINALS
Pre-packs

Quantity of
Product
Type Model Description Each Content
Code
Component

1R4, 2R4, 2R5, 1S35, 2S35, 1UT,


2UT, 3R5, 3S5, 3UT, 1DF, 2DF,
Pre-Insulated Terminal Kit
K150T 10/5 1DM, 2DM O2001
complete with Crimping Tool
YL2001 (Crimping Tool)

2R35A, 1UT, 2UT, 1DF, 2DF, 1DM,


K175 Pre-Insulated Terminal Kit 15/10/5 2DM, 1R4, 1R5, 2R4, 2R5, 1S35, H10281
3UT, 3R5

1R4, 1R5, 1S35, 2R4, 1DF, 2DF,


K300 Pre-Insulated Terminal Kit 25/20/15/10/5 1DM, 2DM, 2R35A, 2R5, 1UT, 2UT, H10282
3R5, 3R6, 3UT

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
122
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

PRE-INSULATED TERMINALS
Pre-Packs

Wall mounted stand comprising of 10 packs of 43


most popular types of terminals, which includes an
Assortment Pack (PRPK28) and a Tool Kit (Crimper
+ Assortment Pack PRPK 29) of terminals. Ideal for
electricians and handymen.

Wire Range
Model Qty Per Pack Product Code
(mm)
1R6 0.34 - 1.57 10 H963
1R5 - 10 H1154
1R4 - 10 H1161
2R6 1.17 - 3.24 8 H1167
2R5 - 10 H1169
2R4 - 10 H1246
3R8 2.5 - 6.0 6 H1247
3R6 - 6 H1170
3R5 - 6 H1249
1S35 0.34 - 1.57 10 H1144
1S4A - 10 H1145
2S35 1.17 - 3.24 10 H1146
2S5A - 10 H1147
1P10 0.34 - 1.57 10 H1148
2P12 1.17 - 3.24 10 -
1UT 0.34 - 1.57 10 H1150
2UT 1.17 - 3.24 8 H1151
1DM 0.34 - 1.57 10 H1152
2DM 1.17 - 3.24 10 H1153
1DF 0.34 - 1.57 10 H1155
2DF 1.17 - 3.24 10 H1156
1PB 0.34 - 1.57 10 H1369
2PB 1.17 - 3.24 6 H1370
1ULM4 0.34 - 1.57 8 H1157
2ULM4 1.17 - 3.24 8 H1158
1ULF 0.34 - 1.57 8 H1159
2 ULF 1.17 - 3.24 8 H1160
Lug Pre Pack Assorted H1241
1S5A 0.34 - 1.57 10 H1162
2S4A 1.17 - 3.24 10 H1163
1DF2 0.34 - 1.57 10 H1320
1DF4 - 10 H1164
2DF4 1.17 - 3.24 10 H1321
3DF 2.5 - 6.0 8 H1165
3DM - 8 H1166
3DF9 - 5 H1242
F1DFY 0.34 - 1.57 5 H1371
F2DFY 1.17 - 3.24 5 H1243
3UT 2.5 - 6.0 6 H1168
3R10 - 5 H1245

Items above with (-) in the codes column are available on special request.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 123
3
CABLE ACCESSORIES

3M TAPES
Vinyl Electrical Tapes

Temperature
Thickness Product
Type Name Description Rating Applications Sizes
Code
(mm) (°C)

Highly conformable in
Scotch® Super all weather applications.
Primary insulation for
Resists UV rays,
33+ Premium Vinyl 0,18 105°C splices up to 600V. 19mm x 20m H1420
abrasion,corrosion, alkalis
Electrical Tape Protective jacketing.
acids. Flame retardant UL
listed. CSA callsified.

H477

9 Fade resistant colours, H478


Scotch 35 Colour excellet insulating Phase indintification
properties. Resists UV rays, 0.18 105°C & marking. 19mm x 20m H479
Coding Tape abrasion, corrosion, alkalis Harnessing.
& acids H480

H481

24mm x 30m H1432


Thicker for increased
Scotch 22 Heavy mechanical strength, Primary insulation for
Duty Vinyl Electrical abrasion resistant. UL listed. 0,25mm 105°C splices up to 600V.
Tape CSA certified. Electrical Protective jacketing.
insulating
36mm x 30m H471

9mm x 6m -

3M 33 Vinyl Electrical Spcification grade vinyl Primary insulation for


insulation tape. Flame 0.18 80°C splices up to 600V. 18mm x 6m -
Tape retardant Protective jacketing.

18mm x 20mm H1420

H1202
H1203

Scotch 1710 Vinyl A good quality electrical 18mm x 20m H1204


Protective jacketing.
vinyl insulating tape. Flame 0.18 80°C
Electrical Tape Harnessing. H1205
retardant. SABS122 specified
H1206
H1207

Corrosion Protection Tapes

Temperature
Thickness Product
Type Name Description Rating Applications Sizes
Code
(mm) (°C)

0,25 H2625
Scotchwrap® 50&51
All weather performances Corrosion protection
All weather Various x 30m
& resistance. Resistant to 80°C on pipes, conduits,
Corrosion Protection
impact & abrasions. joints, etc.
Tape
0,5 H482

Speciality Tapes

Temperature
Thickness Product
Type Name Description Rating Applications Sizes
Code
(mm) (°C)

12mm x 20m H1306

Heat-stable 19mm x 20m H1307


Woven insulating glass cloth.
insulation for
Scotch 27 Glass High temperature resistance. 27 is Class B temp
0.18mm furnace & oven
Cloth Tape High mechanical strength. UL 130°C
controls, motor leads
recognised. 12mm x 55m H2670
& switches

25mm x 55m H2671

Items above with (-) in the codes column are available on special request.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
124
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

3M TAPES
Insulating and Splicing Tapes

Temperature
Thickness Product
Type Name Description Rating Applications Sizes
Code
(mm) (°C)

Electrically round
Rubber tape,
high voltage
Scotch 13 Semi- Semi-conductive. continuous: 90°C
0,76 connections. 18mm x 4,5m H1200
Conducting Tape Compatible with cable short term: 130°C
Provides cable
semi-conductive jackets.
shield continuation.

18mm x 9m H472

Primary electrical
High & low voltage insulation for
Scotch 23 Self-Fusing continuous: 90°C
insulating, self-fusing rubber 0,76 splicing all solid
Rubber Tape short term: 130°C
tape. dielectric cables
through 69kV.

24mm x 9m H10193

All metal open weave Continued


Scotch 24 Shielding shielding braid, electrostatic
25mm x 4,5m H10194
Tape conformable, temperature shielding across
stable. splice.

12mm x 4,5m H10195

All metal woven braid. High


Gorunding of
Scotch 25 & 26 current carrying capacity of
HV splices &
Grounding Braid 12mm2 wire.
terminations.
Solderable

25mm x 5m H2669

Arc & tracking resistant Protective over-wrap


Scotch 70 Self-Fusing
self-fusing, long lasting 0,3mm 180°C for terminating high 24mm x 9m H483
Silicone Rubber Tape
silicone rubber. voltage cables.

Insulate bus bars,


Scotchfil™ Electrical
Black, self-fusing, insulating motor lead
Insulation 3,2mm 80°C 38mm x 1,5m H2621
putty in tape form (re-entry) service
Putty
drop connections.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 125
3
CABLE ACCESSORIES

3M TAPES
3M Tape Applications

Scotch™ Super 33+ Vinyl Electrical Tape

Scotch™ Super 33+ Vinyl Electrical Tape is a black 0.18mm is a premium grade
all-weather vinyl electrical insulating tape with an aggressive adhesive and elastic
backing that enables it to easily conform to irregular surfaces for water resistant elec-
trical and mechanical protection. Scotch Super 33+ is highly conformable and super
stretchy in all weather applications. This tape provides flexibility and easy handling for
all round performances in cold to -18°C and is designed to perform in a continuous
temperature environment up to 105°C.

Scotch 35 Vinyl Electrical Tape

Scotch 35 Vinyl Electrical Tape 0.18mm is a premium grade electrical vinyl tape which
stretches to conform to virtually any shape which requires colour-coded insulation.
Available in nine fade resistant colours. Scotch 35 Vinyl Electrical Colour Coding Tape is
used in phase identification, colour coding leads and piping systems and for marking
safety areas. This tape is abrasion-and weather-resistant, with excellent mechanical
and electrical insulation properties which wraps smoothly and holds tight over a wide
range of temperatures. Flame-retardant and excellent all-weather performance in cold
to -18°C or hot to 105°C.

Scotch 22 Vinyl Insulation Tape

Scotch 22 Vinyl Insulation Tape is a black 0.25mm tape and one of 3M’s thickest vinyl
electrical tapes. It seals in all kinds of weather and provides moisture-tight electrical and
mechanical protection with fewer wraps than thinner tapes. Scotch 22 Heavy Duty Vinyl
Insulation Tape is designed for heavy duty insulation applications that require greater
mechanical strength and abrasion resistance. UL listed for use as electrical insulation
up to 600 volts and 80°C. UL 510 is flame-retardent.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
126
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

NITTO INSULATION TAPE


Insulation Tape

Thickness Width Length


Type Colour Product Code
)mm( )mm( )mm(
Heavy Duty
Red H459

Green H458

Blue H457
0.2 18 20
Yellow H462

Black H456

White H460

Light Duty
Red H2664

Green H2663

Blue H4312
0.13 19 20
Yellow H2666

Black H3272

White H2665

Tapes

Size
Type (mm) Product Code
W H L
Barrier Tape

75 75 500 H485

Detector Tape

75 150 500 H484

Skull and crossbones


Danger Tape

75 150 500 H1208

Danger sign

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 127
3
CABLE ACCESSORIES

CABLE TIES AND STRAPPING


Hellerman Cable Tie Chart
T18R

T30R

T50R

T50I

T50L

T12OS

T12OR

LK5BK

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400 410 420 430 440 450 460 470 480 490 500 510 520 530 540

mm

Nylon Cable Ties Cradles


Product Code Product Code
Min. Tensile Bundle Lenght Width Length Width Height Cable Tie Width
Strenght
Model Model
(N)
Nylon (mm) (mm) (mm) Black White (mm) (mm) (mm) (mm) Black White

TY3 20 14 4.5 Up to 3.5 H445 H443


T18R 80 22 100 2.5 H575 H579 TY8 32 25 6.0 Up to 7.5 H1984 H1983

T30R 135 35 150 3.5 H585 H588

T50R 225 50 200 4.6 H608 H612

T50I 225 85 300 4.6 H594 H598

T50L 225 110 390 4.6 H604 H606

T12OS 535 55 225 7.6 O206 H612

T12OR 535 105 390 7.6 H618 H619

LK5BK 1115 150 535 13.2 H574 -

Items above with (-) in the codes column are available on special request.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
128
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

CABLE TIES AND STRAPPING


Release Cable Ties

Maximum
Average
Cable Product
Type HT Code LxW Tensile
Bundle Code
Strength
Diameter
REL100 100 x 6.5 26 21 H10476
REL140 145 x 7.5 30 35 H10477
REL150 770 x 8.8 100 225 H10478
REL250 250 x 7.5 30 68 H10479
SOFTXXL 880 x 28 35 H10480
SOFTXL 580 x 28 35 H10481
SOFTL 340 x 11 12 H10482
SOFTM 260 x 11 12 H10483
SOFTS 260 x 7 5 H10484
SOFTXS 180 x 7 5 H10485

Stainless Steel Cable Ties

Maximum
Average
Cable Product
Type HT Code LxW Tensile
Bundle Code
Strength
Diameter
MLT8SS5/10 230 x 5/10 13.0/28.8 60 H10486
MLT12SS5/10 330 x 5/10 13.0/28.8 90 H10487
MLT16SS5/10 430 x 5/10 13.0/28.8 120 H10488
MLT24SS5/10 630 x 5/10 13.0/28.8 180 H10489
MAT8SS7/12 230 x 7/12 8.2/12.8 60 H10490
MAT12SS7/12 330 x 7/12 8.2/12.8 90 H10491
MAT16SS7/12 430 x 7/12 8.2/12.8 120 H10492
MAT24SS7/12 630 x 7/12 8.2/12.8 180 H10493

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 129
3
CABLE ACCESSORIES

CABLE TIES AND STRAPPING


ME.T Nylon Cable Ties with Stainless Steel Tooth

The special design of the ME.T cable tie guarantees


maximum resistance and safety even in the most
extreme applications.

Size Maximum Opening load / Article Code


Items per Bag Colour Product Code
Diameter Extraction
(mm) (kg/daN)
White 24 18 MET.2.2102R H10086
100 x 2,5 100
Black 24 18 MET.3.2102R H10087
White 55 18 MET.2.2105R H10176
200 x 2,5 100
Black 55 18 MET.3.2105R H10088
White 36 28 MET.2.2110R H10177
140 x 3,5 100
Black 36 28 MET.3.2110R H10089
White 55 28 MET.2.2111R H10178
200 x 3,5 100
Black 55 28 MET.3.2111R H10090
White 80 28 MET.2.2112R H10179
280 x 3,5 100
Black 80 28 MET.3.2112R H10091
White 51 40 MET.2.2123R H10180
186 x 4,5 100
Black 51 40 MET.3.2123R H10092
White 76 40 MET.2.2140R H10181
290 x 4,5 100
Black 76 40 MET.3.2140R H10094
White 101 40 MET.2.2126R H10182
360 x 4,5 100
Black 101 40 MET.3.2126R H10093
White 101 80 MET.2.2534R H10183
360 x 7,5 50
Black 101 80 MET.3.2534R H10095

Note:
We can supply heat resistant, UV-stabilised, VO self-extinguishing and coloured cable ties to order.

Comparative Cold-resistance Test Comparative Tie Opening Tests

ME.T ME.T

-40°C 80 daN

-30°C 60 daN

-20°C 40 daN
SEL SEL
-10°C 20 daN

-40 -25 -40 -25 -25 -15 -25 -15 18 11 28 20 40 28 80 65


0°C 0 daN
2,5 3,5 4,5 7,5 2,5 3,5 4,5 7,5

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
130
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

CABLE AND WIRE MARKERS


Ovalgrip Cable Markers

Features and Benefits

Ovalgrip markers have been specifically designed


to mark cable and wire both before and after
termination.

Their oval shape means that these markers are easy


to fit by hand directly onto the cable pre-termination
or they can be attached as an identification flag
post-termination using special marker Arrowtags.
Arrowtags fitted with Ovalgrip are fastened using
cable ties and can very easily be modified or
removed without the need to uninstall the cable.

Sizes 50 and 85 can be used with Arrowtags for


identifying larger cable bundles.

Application

Ideally suited to panel building, mass transit, utilities,


telecommunications and electrical contracting.

• Flexible PVC (High temperature 85°C).


• Coding A-Z and 0-9.
• Custom marking on request.
• HO markers available, black on yellow or white.
• International colour coding.
• Standard packets of: H085 = 100, HO50 = 500
• May be filed directly on the cable or alternatively
onto “Arrow Tags”.

Type Material Data

Materials Flexible Polyvinyl Chloride, cadmium free (PVC)

Colour White, yellow, international resistor colour code

Operating Temperature 65°C to +85°C, Intermittent +135°C

Flammability Self extinguishing

0 1 2 3 4 5 6 7 8 9 0 9 A Z + - / Specification BS 2782-540B, BS 6746C, UL224, IEC 304, IEC 757

Type Cable Dimensions Arrowtag


Product Code
OD Packaging Lenght
(mm2) Tag Characters
(mm) (mm) 0 -9 A-Z

1,5 3,6 500 AT1 62,5 9 H1486 H1487

2,5 5,9 100 AT2 63 11 H1489 H1490

AT3 100 19 - -

Items above with (-) in the codes column are available on special request.
Note:
Arrowtags will accept Hellerman Tyton Insulok Cable Ties from 2.5 - 5mm (T18 - T50 Series).

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 131
3
CABLE ACCESSORIES

CABLE AND WIRE MARKERS


Helagrip Cable Markers

Features and Benefits

Helagrip is a versatile and cost effective cable


identification system. The specially designed internal
profile allows one size of marker to be fitted onto a
wide range of cable diameters. Helagrip’s chevron
cut ensures that the markers lock together, enabling
the text legend to stay in place where cable
movement or vibration is likely. The flexible material
ensure that Helagrip cable markers always fit securely
onto the wire.

Application

Ideally suited to panel building, mass transit, utilities,


telcommunications and electrical contracting.
Helagrip is supplied on a reel for ease of use. Markers
are available as standard in international resistor
colour code and yellow material marked in black.
White material marked in black is available on
special order. Characters are 0 - 9, A - Z and standard
electrical symbols. For smaller cables and wire it is
recommended that you use the AD applicator or the
TJC installation tool.

• Flexible PVC (High temperature 85°C).


• Coding A-Z and 0-9.
• Custom marking on request.
• HO markers available, black on yellow or white.
• International colour coding.
• Standard packets of: H085 = 100, HO50 = 500 Note
• May be filed directly on the cable or alternatively Helagrip Markers - Chevron cut available colour
onto “Arrow Tags”. coded, black on yellow or black on white.

Type Material Data

Materials Flexible Polyvinyl Chloride, cadmium free (PVC)

Colour White, yellow, international resistor colour code

Operating Temperature -65°C to +105°C. Intermittent +135°C

Flammability Self extinguishing

01 2 3 4 5 6 7 8 9 0 9 A Z + - / Specification BS 2782 - 540B, BS 6746C, UL224, IEC 684 - 3 - 113

Type Cable Dimensions Quantity Per


Applicator Product Code
OD Tools
Packet Reel
(mm) 0-9 A-Z

1,0 - 3,0 500 1000 TJC13 H1465 H1466

2,0 - 5,0 500 1000 TJC25 H1468 H1469

3,0 - 6,0 500 250 TJC36 H1471 H1472

4,0 - 9,0 250 - TJC49 H1474 H1475


TJC applicator tools.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
132
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

CONNECTORS
Porcelain Scruits

Type Description and Size Product Code

Scruit Porcelain Midget


H97
Midget up to 4mm

Scruit Porcelain Normal


H99
Normal up to 10mm

Porcelain Connectors

Type Description and Size Product Code

Porcelain in 6A 2-Way CFH C402 H79

Porcelain in 15A 2-Way CFH C404 H81

Porcelain in 30A 2-Way CFH C406 H82

Porcelain in 6A 3-Way CFH C403 H84

Porcelain in 15A 3-Way CFH C405 H86

Porcelain in 30A 3-Way CFH H87

Electro Terminal Hi-Heat Strip Connectors

Type Description and Size Product Code


CONN HIHT 05A/12W H2488
CONN HIHT 10A/12W + FT H2491
CONN HIHT 10A/12W + FT H2492
CONN HIHT 10A/12W + FT/WP H2493
CONN HIHT 10A/12W H2494
CONN HIHT 10A/12W + WP H2495
CONN HIHT 16A/12W+ FT H2498
CONN HIHT 16A/12W+ FT/WP H2499
CONN HIHT 16A/12W H2500
CONN HIHT 16A/12W+ WP H2501
CONN LOHT 16A/12W BLACK -
CONN LOHT 16A/12W WHITE H3134
CONN HIHT 32A/12W H2504

PVC Strip Connectors

Type Description and Size Product Code


12W BLACK H88
12W TRANS H2490
12W TRANS H2497
12W BLACK H90
12W BLACK H92
12W TRANS H93
12W BLACK H94
12W TRANS H2506
12W BLACK H96

Items above with (-) in the codes column are available on special request.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 133
3
CABLE ACCESSORIES

HEAT SHRINK

Commericial Grade Polyolefin

Is ideal for providing insulation of electrical


connections, terminals, components and wiring
systems. It requires a minimum shrink temperature
of 120°C and is well suited to manual as well as
automatic methods of application. Is very suitable for
use as a continuous insulation sleeve in a variety of
industrial applications.

Mini Reels

Product Code
Supplied Recov. Wall (WT)
Model Colour
ØD ØD nom. Black
CP24R 2.4 1.2 0.5 H683
CP32R 3.2 1.6 0.5 H685
CP48R 4.8 2.4 0.5 H687
CP64R 6.4 3.2 0.6 H689
CP95R 9.5 4.8 0.6 H691
CP127R 12.7 6.4 0.6 H693
CP190R 19.0 9.5 0.8 H695
CP254R 25.4 12.7 0.9 H697

Pre - Packs

Product Code
Supplied Recov. Wall (WT)
Model Colours
Green
ØD ØD nom. Red Blue Yellow Black White
Yellow
CP24P 2.4 1.2 0.5 H643 - H642 H6314 H641 H644
CP32P 3.2 1.6 0.5 H647 - H646 H6157 H645 H648
CP48P 4.8 2.4 0.5 H651 - H650 - H649 H652
CP64P 6.4 3.2 0.6 H655 - H654 H7429 H653 H656
CP95P 9.5 4.8 0.6 H659 - H658 - H657 H660
CP127P 12.7 6.4 0.6 H663 - H662 - H692 H664
CP190P 19.0 9.5 0.8 H667 - H666 H6930 H694 H668
CP254P 25.4 12.7 0.9 H671 - H670 - H696 H672
CPPKITBK 2.4 - 4.8 x 10 each / 6.4 - 25.4 x 5 each - (Black) - - - - H10416 -
CPPKITCOL 2.4 - 12.7 x 5 each / 19.0 - 25.4 x 2 each - (Std Colours) H10417

Material Data

Type Commercial Grade Polyolefin

Shrink Ratio 2:1

Longitudinal Change after Shrinkage .max %-5

)Minimum Shrink Temperature (Metric +120°C

Operating Temperature -55°C to +135°C

)Dielectric Strength (metric 25kV/mm

Flammability Flame retardant except for clear

Items above with (-) in the codes column are available on special request.
Note:
• All dimensions in mm except for quantity in metre (m).
• Subject to technical changes.
• Colours available: Black, Red, Blue, White, Yellow, Green/Yellow, Clear (Clear is not Self Extinguishing)

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
134
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
CABLE ACCESSORIES

PUTTY
Cable Compound Putty

Technical Data
Type Description Product Code

• B.I.C.C
H68
• 500g Pack

CABLE CLIPS

Description and Size


Type Product Code
(mm)
Flat
White

5.0 K804

8.5 K805

10.5 K806

12.5 K807

14.5 K808

Round
White
03 K809
04 K810
05 K811
06 K812
07 K813
08 K815
09 K817
10 K819
11 K821
12 K823
14 K824
20 K25
22 K825
Black
08 K814
09 K816
10 K818
11 K820
12 K822

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue. VOLTEX CATALOGUE 135
3
CABLE ACCESSORIES

GROMMETS, PLUGS AND STRIPS


PVC Beading Edge Protection Strip

Features and Benefits


Manufactured from a flexible PVC compound which ensures ease of use. Can be used to protect cables from chafing on bulkheads.

Application
PVC Beading strip is used to protect cables routed through sharp-edged cutout sections. It can also be used to provide an attractive finish to panel edges.

Technical Data
Width Width Width Width Width Height
Type (mm) (mm) (mm) (mm) (mm) (mm) Product Code
(W) (W2) (W3) (W4) (H) (H2)
SM1 5.0 1.0 1.8 4.2 6.3 4.9 H10462

RA1 6.4 2.4 - - 7.1 5.6 H10463

PS1 1.2 0.6 - - 5.0 3.15 H10464

Material Data
Material )Flexible Polyvinyl Chloride, cadmium free (PVC
Colour )Black (BK
Operating
-65°C to +105°C
Temperature
Flammability Self extinguishing

WE ALSO STOCK A WIDE RANGE OF EDGE


PROTECTION GROMMETS.
Features and Benefits
HellermannTyton edge protection grommets, made of cadmium-free, flexible PVC
or Polyethylene, come in a wide range of shapes and sizes. They are resistant to
various minerals and environmental effects.

Application
Edge protection grommets are used wherever cable and wires are routed
through outlets and apertures. Grommets offer excellent mechanical protection.

Note:
• For full range of grommets, plugs and strips enquire at your nearest branch.

For extended & complete range visit www.voltex.co.za. Minimum quantity orders may apply. Dimensions generally shown in mm and subject to technical change. Voltex codes and descriptions have been used above. Use Voltex K8 codes and
136
2 VOLTEX CATALOGUE product type for spec purposes. Refer to appendix for additional information, certification required and full technical specification from the supplier. All details provided are for indicative purposes only. Complete T & C's at back of catalogue.
Disclaimer

• All images are for illustration purposes and may differ from actual products.

• Despite every effort made to ensure the accuracy of the technical information in this catalogue, Voltex cannot be held liable for the actual product used in

the installation, as this validation with regards to suitability is entirely the responsibility of the installer. Voltex will not be held responsible for any errors or

omissions in this catalogue.

• All products need to be installed by an appropriately qualified electrician/lawfully qualified person.

• Specifications in this catalogue are subject to change without notice due to continuous product development and improvement.

• Due to material and manufacturing tolerances, test results can vary per individual product or length of product. Accordingly, technical data shown is typical

and given for guidance purposes only. No warranty or guarantee can be offered that the installed product will match the test results exactly and Voltex

accepts no liability for product supplied not matching these stated figures.

• Our products are, to the best of our knowledge, free of defect at the time of shipment. Sole and exclusive remedy is limited, at our sole option, to repair or

replace products supplied by us.

• Liability is disclaimed for any incidental or consequential damage.

• No liability will be assumed for misapplication, which includes:


- Use in non-standard (aggressive/hostile) environments;

- Use on aluminium or similar softer ‘fix to’ materials;

- Overloading or use other than indicated.

• While stocks last.

• Nothing in this catalogue or any part thereof may be construed as an offer to supply or sell any product to any person, or as an inducement or offer to any

person to enter into a contract with Voltex in respect of the supply of any product.

• Subject to all applicable law, Voltex :

- Accepts no responsibility for any loss or damage, of whatsoever nature, arising in any way out of the use of or reliance on information contained in

this catalogue;

- Makes no representations as to the availability of any product and reserves the right to modify or discontinue a product without notice, and to change

product specifications and descriptions without notice;

- Accepts no responsibility for misprints, errors, omissions or inaccuracies in this catalogue;

- Makes no warranties, express or implied, in this catalogue :

• As the features and colours of a product may be reproduced inexactly in the photography process, this catalogue is merely a guide;

• All rights are fully reserved. No part of this publication (including the text and images) may be modified, copied, reproduced, stored in a

retrieval system, transmitted or distributed in any form or by any means (whether electronic, mechanical, photocopying or otherwise), without

the prior, express written permission of Voltex.


VOLTEX BRANCHES NATIONWIDE
EASTERN CAPE KWA-ZULU NATAL Rustenburg Strand
East London Ballito Tel: +27 (14) 597 1311 Tel: +27 (21) 853 8511
Tel: +27 (43) 743 3650 Tel: +27 (32) 946 3966/3951 +27 (14) 597 2567/8/9 +27 (21) 853 6425/6780

*Mount Frere Briardene Vredenburg


NORTHERN CAPE Tel: +27 (22) 713 2371
Port Elizabeth Tel: +27 (31) 573 9200
Kathu Wetton
Tel: +27 (41) 504 8200 Durban Tel: +27 (53) 723 2222
Tel: +27 (31) 310 7900/1 Tel: +27 (21) 761 4599
Umtata Kimberley
Tel: +27 (47) 532 4706 Newcastle Worcestor
Tel: +27 (53) 832 1211/2/3/4
+27 (47) 531 1584 Tel: +27 (34) 315 4150 Tel: +27 (23) 342 1795
Kuruman
Pietermaritzburg Tel: +27 (53) 712 1164
FREE STATE Tel: +27 (33) 342 9773
+27 (33) 345 4545 Postmasburg
Bloemfontein
Tel: +27 (53) 313 3162
Tel: +27 (51) 505 0700 Pinetown
Tel: +27 (31) 702 0831 Upington
Welkom
Tel: +27 (54) 332 6211
Tel: +27 (57) 396 3191 Richards Bay
Tel: +27 (35) 751 2000 WESTERN CAPE
GAUTENG
Bellco
Alberton LIMPOPO Tel: +27 (21) 440 7100
Tel: +27 (11) 907 3752/6 Hoedspruit
Blackheath
Bramley Tel: +27 (15) 793 3703
Tel: +27 (21) 905 1877
Tel: +27 (11) 887 1308/9 Lephalale
+27 (11) 887 1340/1 Brackenfell
Tel: +27 (14) 763 2215
Tel: +27 (21) 982 1404
Centurion Makhado
Tel: +27 (12) 653 3090 Cape Town
Tel: +27 (15) 516 2075
Tel: +27 (21) 531 2033
Denver Phalaborwa
Tel: +27 (11) 616 6269 Cape Town City Centre
Tel: +27 (15) 781 6409/1
+27 (11) 622 3416 Tel: +27 (21) 462 4058
+27 (15) 781 6413
East Rand Polokwane George
Tel: +27 (11) 918 5220 Tel: +27 (15) 297 6177 Tel: +27 (44) 871 2006
Kempton Park +27 (15) 297 3720/1 Knysna
Tel: +27 (11) 970 3290 Tzaneen Tel: +27 (44) 382 1242
Meadowlands Tel: +27 (15) 307 1213/4 Mossel Bay
Tel: +27 (11) 983 8680 Tel: +27 (44) 695 0010
MPUMALANGA Overstrand
Midrand
Tel: +27 (11) 315 5800 Lydenburg (Sales Office) Tel: +27 (28) 312 3366
Tel: +27 (13) 235 4706 Paarl
Montana
Tel: +27 (12) 524 9600 Nelspruit Tel: +27 (21) 872 1554/5
Tel: +27 (13) 753 3641/2/3/4 +27 (21) 872 1564
Pretoria
+27 (13) 753 2682/3/4
Tel: +27 (12) 330 0211
+27 (12) 330 0220 Witbank
Tel: +27 (13) 692 8536
Pretoria North
+27 (13) 692 8543/48
Tel: +27 (12) 546 8111/3221
Randburg NAMIBIA
Tel: +27 (11) 792 3380
Windhoek
Reuven Tel: +264 (61) 418 100
Tel: +27 (11) 434 3800
West Rand NORTH WEST
Tel: +27(11) 951 5780 Klerksdorp
Tel: +27 (18) 462 9945/6/7
Potchefstroom
Tel: +27 (18) 297 5520/1

* For new branches refer to our website for contact information.

your electrical connection


VERSION – CW SF 2
! DISCLAIMER
www.voltex.co.za
2014/08 • For the full disclaimer see inside. facebook.com/VoltexSA | twitter.com/voltexsa

You might also like