Professional Documents
Culture Documents
Power 5, 6, 7, 8, 9
LPAR -> Logical PARtition (Mandory req. HMCv. 3, 6, 7, 8)
Combination ---- CPU/MEM/IO
Upto-P6 1CPU/10 .1
From P7 1CPU/20 .05
CPU-> 8
Memory -> 20GB
--------------------------------------
IO 2NIC VIO
2FC VIO
Micro partition CPU assignment can be done in granularity.
VIO for Virtualization of I/O devices (HBA/FC , NIC, … etc)
HMC Hardware Management Console for managing multiple power H/W. Mandatory for lpar management.
Multipath Mangement:
SDD datapath …. & lsvpcfg (seen in legacy servers)
SDDPCM pcmpath
SEA (Shared Ethernet Adapter) is created in VIO servers for passing lpar network packets through VIO to Network
Multiple LPARs will use same physical adapter assigned in VIO.
SEA = 1Physical (or Logical/LinkAgg/EtherChan) + 1Virtual (vlan/s)
**min Req.
Patch release
a) Bug identification
b) InterimFix (ifix)/Emergency Fix (efix) -> NOT tested
c) PTF is release later of ifix, after proper testing
d) TL is new/upgraded feature. SP is collection of PTFs
nimadm -> command to use for upgrade/migration with minimal downtime. Command creates
clone on blank disk that is in LPAR for migration
https://www.youtube.com/watch?v=Bgb__Km_SXA
AIX install via NIM
https://www.youtube.com/watch?v=6md1g05oCnQ
------------
Services:
Network services are part of inetd. Ex: ftp, telnet, rsh
Other services: lssrc –a list all services
lssrc –g <service> list group services
lssrc –s <service> list specific service
stopsrc –g <service> stop group services
stopsrc –s <service> stop specific services
startsrc –g <service>
startsrc –s <service>
----------------------
Inittab:
Create entry mkitab “identifier:runlevel:action:Command”
Ex: mkitab “tsm:2:once:/usr/dsmc”
Storage Addtion:
1) Detect LUNs after Storage team task
Command: cfgmgr (HPux – ioscan)
2) Enable pv ;
Command: chdev –l hdiskX –a pv=yes (HPUx – pvcreate)
3) LVM
a) mkvg create vg
b) mklv create lv
c) crfs create fs
d) extendlv expand LV
e) chlv
f) chfs
g) chvg
h) migratepv
i) chpv
HACMP v4, v5
PowerHA System Mirror v6, 7.1, 7.2
RSCT
clRGinfo
lssrc –ls clstrmgrES
cltopinfo
cllsserv checking startup & stop script