Professional Documents
Culture Documents
It can help destroy and neutralize cigarette smoke and it's offensive odors.
NOTHING drives customers out of your establishment FASTER than a room full of
CIGARETTE OR CIGAR SMOKE!!! Cigarette / Secondhand Smoke
“The good news is that Tobaccut will remove not only the
smell of cigarette smoke, but also the harmful chemicals that
it contains”
Applications:
Tobaccut is best applied by padding or spraying. It may also be used by dipping
methods i.e. drum washers, winches. However being weakly anionic. Tobaccut is not
exhaustible based on fibre type and fabric construction a pad bath dosage of 7% to
15% is normally optimum to achieve desired results.
Note:
On light weight fabric, (80~150 gsm) a dry add on of 3% to 6% on weight of
fabric is sufficient.
On heavier fabric (200~400 gsm) a dry add on at 2.5 to 5% on weight of fabric
is sufficient to achieve desired benefits.
Example
Substrate : 100% Polyester 130 gsm
Dosage : 100 gm/l Tobaccut
Pad with 100% pick up
Dry 1050C x 3 min.
Cure 1800C x 1 min.
4
Tobaccut Series:
Features:
+ + + = Tobaccut Active
Component-1 particles in
Micro porous in mixture
of 2 components
Si-Oθ- Zn⊕-O-
Distributed image of Tobaccut Active Component-1 with ionized surface with (+ve)
by Zn-O- Zinc oxide and in (-ve) by Si-O-Silicate dioxide with silanol radicals
Basic odors (+ve charged) like ammonia, amines and others being coupled to (-ve)
charged Si-O- silica dioxide particles.
+ + + = Tobaccut Active
Component-1 =
particles in Micro K
porous inside
Si-Oθ- Zn⊕-O-
Each particle of Si-O- in minus and ZN-O- in plus ions catches +ve ionized basic
odors or gases inside the micro-porous space of each particle
6
Tobaccut Active Component-1 Odor (gas) absorbent mechanism
+ + +
+ + +
= Tobaccut Active
Component-1 =particles
Si-O-- Zn+-O-
Tobaccut Active Component-1 to remove basic odors (gases) in (+ve) ionized by (-ve)
Ionized Si-O- Silicate dioxide and to catch acid odors (gases)
Ionized in (-ve) by (+ve) ionized –Zn-O- in Tobaccut Active Component-1
To wash out basic odors (+ve) and acid odors (-ve) inside Tobaccut Active
Component-1 particles
Si-O-- ZN+-O-
This explains Tobaccut Active Component-1 keeps effective for much longer time
without saturation point filled by odors already catched, as long as the washing or
water wiping is kept time to time.
Basic odors and acid odors washed away with cleaned micro porous spaces to be
ready to start absorption
=Tobaccut Active
Component -1 particles cleaned
Si-O-- ZN+-O-
8
WASHED AND CLEANED TOBACCUT ACTIVE COMPONENT-1
TO START COMPLEXING ODOURS AGAIN
___
+ ___
+
Si-O-- ZN+-O-
Features:
Same as Tobaccut Active Component-1, but amine compound attached to
silicate dioxide particles catch more effectively non polarized gas odors such as
formaline and acetoaldehyde
Heat resistance to 210ºC max.
More effective to cigarette odors, house sick syndrome
Mechanism:
Ionic catching basic odor in (+) by Si-O- silanol radical
Chemical reaction catching aldehydes odors in non-polar by amine compount which
is ethanol amine
RCHO (aldehydes odors) + R NH (amine compounds)
Name of odors De-odorizing quantity in ppm after passage of time from initial
(gases) quantity
Initial gas After After After
concentration 10 mins 20 mins 30 mins
Nox 100 35 24 19
SOx 100 2 1 0.5
Acetic acid 50 1 < 0.2 < 0.2
Acrylic acid 50 10 8 7
ethyl
Metha acrylic 50 9 5 4
ethyl
Ozone 3 0.2 < 0.01 < 0.01
Propionic acid 30 4 2 2
n-Lactic acid 30 5 2 2
10
Test method:
1. Placed is a test sample of 0.5 gm of Tobaccut Active Component-1 in 3 ltrs
volume of test plastic bag and inject above amount each of gas each stated
as initial gas concentration
2. By use of detector, detected is each gas concentration remained in ppm
inside the 3 ltr volume of test standard plastic bag after each above passage
of time to catch each odor by 0.5 gm of Tobaccut Active Component-1
sample inside the plastic bag.
Name of De-odorizing quantity in ppm after each passage of time from the
odors (gases) initial quantity
Initial gas At after 30 At after 60 At after 120 At after
concentration mins mins mins 180 mins
ppm ppm Ppm ppm ppm
Ammonia 965 270 270 250 230
Hydrogen 941 870 700 170 0.5
sulfide
Trimethyl 300 25 24 24 24
amine
Methyl 100 100 100 90 85
mercaptane
Test method:
1. Placed is a test sample of 0.5 gm of Tobaccut Active Component-1 in 3 ltrs
volume of test plastic bag and inject above amount each of gas each stated as
initial gas concentration