Professional Documents
Culture Documents
Slipform Pavers
SP 64 | SP 64 i
At a glance: outstanding features
02
of the new SP 64 / SP 64 i
03
7 | PERFECT ERGONOMIC DESIGN AND 8 | HIGHLY PRECISE STEERING AND DRIVE SYSTEMS
HANDLING Intelligent steering and control systems for exceedingly quiet oper-
Relaxed working is ensured by the ergonomically ation even in narrow bends guarantee precision in concrete paving.
designed workplace offering a user-friendly operating
concept and perfect visibility.
Highlights in modular design
7 |
10 |
5 |
6 |
12 |
3 |
9 |
2 |
4 |
8 |
Range of applications
Concrete spreading
Engine
Number of cylinders 6 6
Rated power at 2,100 min-1 155 kW / 208 HP / 211 PS 180 kW / 241 HP / 245 PS
Electrical system
Tank capacities
Adblue® / DEF tank – 32 l
Driving properties
Crawler units
Number 4
Height adjustment
Hydraulic 1,100 mm
Mechanical 420 mm
Central crown
Variable adjustment range for paving widths of 2.00 to 6.00 m: max. 3 % *2
Transport dimensions (L x W x H)
Machine weights
Operating weight CE (including slab paving mould type 910 m), 3.50 m 19,000 kg *3
*1 = Please consult factory for special paving widths, layer thicknesses and optional equipment features
*2 = Values within standard transport height; please consult factory for special dimensions
*3 = Weights depend on the machine’s range of equipment and paving width
Dimensions
06
07
Paving situation: slipform paver SP 64 / SP 64 i equipped with spreading auger or spreading plough,
slab paving mould type 910 m / 910 wm, oscillating beam and super smoother
1,000
Working direction
Paving width + 450
Paving width
Dimensions in mm
*1 = Longitudinal joint tie bar inserter (pivotable) and side tie bar inserter not shown
Paving situation: slipform paver SP 64 / SP 64i equipped with spreading auger or spreading plough,
slab paving mould type 910 m / 910 wm, dowel bar inserter (DBI), oscillating beam and super smoother
1,000
10,500 *2
Working direction
Paving width + 450
Paving width
Dimensions in mm
*2 = Applies to standard longitudinal joint tie bar inserter (non-pivotable)
Standard equipment
08
09
SP 64 SP 64 i
Base machine
Electrical system 24 V
Hydraulic system with an adequately sized hydraulic oil tank and a pump splitter gearbox with 2 output
shafts and the pumps required for the basic equipment of the machine.
With a large number of fixation points, the chassis is prepared for modular supplementing with various
machine functions
Robust steel frame, telescoping in stages by total 875 mm on both sides to the front and to the rear;
can be optionally extended by fixed extension pieces
It is possible to connect concrete equipment between 2.00 m and 6.00 m to the frame, with optional
extension to working widths up to 7.50 m
Chassis components for step-by-step mechanical telescoping for working widths up to 4.00 m
Paving speed: crawler unit type B0: 0 to 6 m / min; type B1: 0 to 7 m / min
Travelling speed: crawler unit type B0: 0 to 21 m / min, type B1: 0 to 23.5 m / min
Version with four crawler units type B0 with 1,000 mm height adjustment, 300 mm wide
Version with two manually slewing crawler unit connections each at front and rear
WI-CONTROL - the high-quality control for optimum interaction between all machine functions
The existing CAN bus system can be expanded for the specific customer
Eco mode: Engine management optimised acc. to demand for reduced diesel consumption and low noise
emissions
Proportional electrohydraulic levelling and steering by PLC system including 4 levelling sensors and
2 steering sensors
Automated recognition of the particular machine configuration enables simple orientation for the operator
= Standard equipment
= Standard equipment, replaceable with optional equipment
= Optional equipment
SP 64 SP 64 i
Vibration
Mould boards series 910 m, without crown profile – basic width 3.50 m
Operator´s stand
Control panel 2 with multi-function control display, providing a menu for the operator giving all necessary
machine parameters and allowing settings to be made. This can be adapted to all travel directions and paving
configurations
One of the control panels can be stored in the engine station; the second control panel be protected against
vandalism and weather using lockable covers
Others
Machine preparation for installing the control unit for WITOS FleetView. "WIRTGEN Road Technologies
Telematics and on-site Solutions" (WITOS) is the intelligent telematics system of the WIRTGEN Road –
Technologies for efficient fleet and service management worldwide.
= Standard equipment
= Standard equipment, replaceable with optional equipment
= Optional equipment
Optional equipment
10
11
SP 64 SP 64 i
Chassis components for continuous hydraulic telescoping for working widths up to 6.00 m
Version with four crawler unit tracks type B0 with polyurethane track pads
Version with four crawler units type B0 with 1000 mm height adjustment, 300 mm wide
Version with four crawler unit tracks type B0 with polyurethane track pads
Version with two hydraulically slewing crawler unit connections each at front and rear
= Standard equipment
= Standard equipment, replaceable with optional equipment
= Optional equipment
SP 64 SP 64 i
Vibration
Metering gate for paving mould without crown profile - basic width 3.50 m
Split metering gate for paving mould with / without crown profile - basic width 3.50 m
Mould boards series 910 wm, without crown profile – basic width 3.50 m
Paving mould series 910 wm, with / without crown profile - basic width 3.50 m
Automatic dowel-bar inserter (DBI) for use without crown profile - basic width 3.50 m -
mechanically telescoping
Automatic dowel-bar inserter (DBI) for use without crown profile - basic width 3.50 m -
hydraulically telescoping
Automatic dowel-bar inserter (DBI) for use with crown profile - basic width 4.00 m - mechanically telescoping
Automatic dowel-bar inserter (DBI) for use with crown profile - basic width 4.00 m - hydraulically telescoping
Base group for dowel-bar inserter (DBI) for paving width up to 3.50 m
Base group for dowel-bar inserter (DBI) for paving width up to 4.00 m
Base group for dowel-bar inserter (DBI) for paving width up to 5.00 m
Base group for dowel-bar inserter (DBI) for paving width up to 6.00 m
Electronic control for dowel-bar inserter (DBI) and longitudinal tie-bar inserter (TBI) + chassis extension
pieces for dowel-bar inserter (DBI)
= Standard equipment
= Standard equipment, replaceable with optional equipment
= Optional equipment
Optional equipment
12
13
SP 64 SP 64 i
Electronic control for dowel-bar inserter (DBI) and longitudinal tie-bar inserter (TBI) + chassis extension
pieces for longitudinal tie-bar inserter (TBI)
Electrical control for dowel-bar inserter (DBI) and longitudinal tie-bar inserter (TBI) + chassis extension
pieces for dowel-bar inserter (DBI) and longitudinal tie-bar inserter (TBI)
1 side tie-bar inserter for straight tie-bars, max. ø 20 mm, length 800 mm
2 side tie-bar inserters for straight tie-bars, max. ø 20 mm, length 800 mm
= Standard equipment
= Standard equipment, replaceable with optional equipment
= Optional equipment
SP 64 SP 64 i
Load blocks as conversion aid for altering the width of the dowel-bar inserter (DBI)
Transport frame for oscillating beam and super smoother as transport unit
= Standard equipment
= Standard equipment, replaceable with optional equipment
= Optional equipment
Optional equipment
14
15
SP 64 SP 64 i
Belt conveyor 5.90 m x 0.60 m with reversible hydraulic drive, hydraulically adjustable
Belt conveyor 6.00 m x 0.60 m, folding, with reversible hydraulic drive, hydraulically adjustable
Auger conveyor 4.60 m x 0.40 m with reversible hydraulic drive, hydraulically adjustable
Steel chute
Steel / rubber chute
1 set of hydraulic components for adjusting the sideplate of EV offset mould boards
Height adapter rigid for split offset paving mould 0.90 m tall
Offset paving mould up to 0.60 m wide (max. 0.40 m tall) (Note form TEI#2170960)
Offset paving mould from 0.60 m to 1.20 m wide (max. 0.40 m tall) (Note form TEI#2170960)
Offset paving mould from 1.20 m to 1.80 m wide (max. 0.40 m tall) (Note form TEI#2170960)
Offset mould board up to 0.90 m tall (max. 0.60 m base width), incl. hopper (Note form TEI#2170960)
Offset mould board up to 1.20 m tall (max. 0.60 m base width), incl. hopper (Note form TEI#2170960)
Split offset paving mould up to 0.60 m wide (max. 0.40 m tall) (Note form TEI#2170960)
Split offset paving mould from 0.60 m to 1.20 m wide (max. 0.40 m tall) (Note form TEI#2170960)
Lower part for offset paving mould of a split moulds up to 0.60 m wide (max. 0.40 m tall)
Lower part for offset paving mould of a split moulds from 0.60 m to 1.20 m wide (max. 0.40 m tall)
Operator´s stand
= Standard equipment
= Standard equipment, replaceable with optional equipment
= Optional equipment
SP 64 SP 64 i
Others
Paint in maximum two special colours with substructure in special colour (RAL)
Additional electrical water pump 24 V with 10.00 m hose and spray gun with handle
Second tensioning winch for levelling the machine using two wire ropes
Export packing
= Standard equipment
= Standard equipment, replaceable with optional equipment
= Optional equipment
WIRTGEN GmbH
Reinhard-Wirtgen-Str. 2 · 53578 Windhagen · Germany
Phone: +49 (0) 26 45 / 131-0 · Fax: +49 (0) 26 45 / 131-392
Internet: www.wirtgen.com · E-Mail: info@wirtgen.com
Illustrations and texts are non-binding and may include customized fittings. Subject to technical changes.
Performance data depend on operational conditions. No. 2525048 EN-03/16 © by WIRTGEN GmbH 2016. Printed in Germany