You are on page 1of 53

RAB and NAS counters

RA41335EN60GLA1 1
RAB and NAS counters

RA41335EN60GLA1 4
RAB and NAS counters

RA41335EN60GLA1 5
RAB and NAS counters

RA41335EN60GLA1 6
RAB and NAS counters

UE supports up to 8 x AM DRB plus 0 x UM DRBs or up to 5 x AM DRB plus 3


x UM DRB

RA41335EN60GLA1 7
RAB and NAS counters

RA41335EN60GLA1 8
RAB and NAS counters

RA41335EN60GLA1 9
RAB and NAS counters

RA41335EN60GLA1 10
RAB and NAS counters

RA41335EN60GLA1 11
RAB and NAS counters

RA41335EN60GLA1 12
RAB and NAS counters

RA41335EN60GLA1 13
RAB and NAS counters

RA41335EN60GLA1 14
RAB and NAS counters

RA41335EN60GLA1 15
RAB and NAS counters

RA41335EN60GLA1 16
RAB and NAS counters

RA41335EN60GLA1 17
RAB and NAS counters

RA41335EN60GLA1 18
RAB and NAS counters

RA41335EN60GLA1 19
RAB and NAS counters

RA41335EN60GLA1 20
RAB and NAS counters

RA41335EN60GLA1 21
RAB and NAS counters

RA41335EN60GLA1 22
RAB and NAS counters

RA41335EN60GLA1 23
RAB and NAS counters

RA41335EN60GLA1 24
RAB and NAS counters

RA41335EN60GLA1 25
RAB and NAS counters

RA41335EN60GLA1 26
RAB and NAS counters

RA41335EN60GLA1 27
RAB and NAS counters

RA41335EN60GLA1 28
RAB and NAS counters

RA41335EN60GLA1 29
RAB and NAS counters

RA41335EN60GLA1 30
RAB and NAS counters

The S1 setup procedure shall be the first S1AP procedure triggered after the TNL
association has become operational (after SCTP association establishment).
The eNB initiates the procedure by sending a S1 SETUP REQUEST message including
the appropriate data to the MME. The MME responds with S1 SETUP RESPONSE
including the appropriate data.
All S1 messages are treated as SCTP data, thus everytime either eNB or MME
receives S1 message, it shall sends back selective acknowledge (SACK) chunk to its
peer.

RA41335EN60GLA1 31
RAB and NAS counters

RA41335EN60GLA1 32
RAB and NAS counters

RA41335EN60GLA1 33
RAB and NAS counters

All S1 messages are treated as SCTP data, thus everytime either eNB or MME
receives S1 message, it shall sends back selective acknowledge (SACK) chunk to its
peer.

RA41335EN60GLA1 34
RAB and NAS counters

RA41335EN60GLA1 35
RAB and NAS counters

RA41335EN60GLA1 36
RAB and NAS counters

The S1 setup procedure shall be the first S1AP procedure triggered after the TNL
association has become operational (after SCTP association establishment).
The eNB initiates the procedure by sending a S1 SETUP REQUEST message including
the appropriate data to the MME. The MME responds with S1 SETUP RESPONSE
including the appropriate data.
All S1 messages are treated as SCTP data, thus everytime either eNB or MME
receives S1 message, it shall sends back selective acknowledge (SACK) chunk to its
peer.

RA41335EN60GLA1 37
RAB and NAS counters

The S1 setup procedure shall be the first S1AP procedure triggered after the TNL
association has become operational (after SCTP association establishment).
The eNB initiates the procedure by sending a S1 SETUP REQUEST message including
the appropriate data to the MME. The MME responds with S1 SETUP RESPONSE
including the appropriate data.
All S1 messages are treated as SCTP data, thus everytime either eNB or MME
receives S1 message, it shall sends back selective acknowledge (SACK) chunk to its
peer.

RA41335EN60GLA1 38
RAB and NAS counters

RA41335EN60GLA1 39
RAB and NAS counters

RA41335EN60GLA1 40
RAB and NAS counters

RA41335EN60GLA1 41
RAB and NAS counters

RA41335EN60GLA1 42
RAB and NAS counters

RA41335EN60GLA1 43
RAB and NAS counters

RA41335EN60GLA1 44
RAB and NAS counters

RA41335EN60GLA1 45
RAB and NAS counters

RA41335EN60GLA1 46
RAB and NAS counters

E-RAB releases due to "No Radio Resources Available" initiated by


eNB are are counted as normal releases as they are not real drops
resulted from any radio quality problems.
The PRE_EMPT_GBR_BEARER and
PRE_EMPT_NON_GBR_BEARER counters provide the total number
of released GBR and non GBR E-RABs due to "Radio resources not
available" despite a pre-emption used in the counter names,
respectively

RA41335EN60GLA1 47
RAB and NAS counters

RA41335EN60GLA1 48
RAB and NAS counters

RA41335EN60GLA1 49
RAB and NAS counters

RA41335EN60GLA1 50
RAB and NAS counters

RA41335EN60GLA1 51
RAB and NAS counters

RA41335EN60GLA1 52
RAB and NAS counters

RA41335EN60GLA1 53
RAB and NAS counters

M8023C0..11
Counter is updated when a PDCP SDU is received from a UE assigned to a specific
QCI Counter Group
M8023C21..26
Average of samples taken from the number of active UEs, having one SRB and at
least one DRB established. At least the operator-specific QCI of one DRB has to be
assigned to the Counter Group 1 according to the QCI Translation Table.

RA41335EN60GLA1 54
RAB and NAS counters

RA41335EN60GLA1 55

You might also like