Professional Documents
Culture Documents
KINGS
COLLEGE OF ENGINEERING
QUESTION BANK
UNIT - I
SIGNALS
PART- A (2 MARKS)
1. Differentiate analog and digital signal processing.
2. Give an example for discrete time signal.
3. Name any four elementary time domain operations for discrete time
domain.
4. What is linear time invariant system?
5. Write short notes on system and signals?
6. Distinguish between a causal and non causal system,
7. Define even and odd signals.
8. State sampling theorem.
9. Distinguish between deterministic and random signals.
10. What are multichannel signals?
11. What are the disadvantages of analog signal processing?
12. What are the advantages of digital signal processing?
13. Draw the basic block diagram of DSP system.
14. Differentiate among analog, quantized and digital signal.
PART- B
1. (a) Explain aliasing theorem? (8)
(b) Briefly explain quantization. (8)
2. Name any four application areas of digital signal processing with suitable
examples, (16)
3. Explain the concept of energy and power signals. Also check whether the
following signals are energy or power signals. (16)
n n
x(n)=[1/3] u(n), (b)x(n)=sin[π/4]
4.
Check the following system for linearity, time invariance, causality and
stability.
i. y(n)=ex(n)
ii. y(n)=x(-n+2) (16)
5. Describe the different types of discrete time signal representation. (16)
6. Define energy and power signals. Determine whether a discrete time unit
step signal x(n)=u(n) is an energy signal or a power signal. (16)
7. Discuss the merits, demerits and application of digital signal
processing. (16)
UNIT- II
DISCRETE TIME SYSTEM ANALYSIS
PART- A (2 MARKS)
1. Define Z-transform and its ROC.
2. Define transfer function.
3. Draw the basic structure of a linear constant difference equation.
4. State initial value theorem of Z-transform.
5. State final initial value theorem of Z-transform.
6. State two properties of z-transform.
7. What is ROC?
PART-B
2. State and prove that the product of the two sequences x1(n) and x2(n) is
equivalent to the convolution of their respective z-transforms. i.e. X1(z) * X2(z).
(16)
3. (a) Find the z-transform of x1(n)={3,5,7} and x2(n)={3,0.5.0.7). what is the
relation between X1(z) and X2(z)? (8)
(b) Find the inverse z-transform of H(z)=z(z+2)/(z-0.2)(z+0.6). (8)
4. Find the z-transform of the following signals and plot its ROC.
(i) x1(n)=anu(n)
(ii) x2(n)=a-nu(-n-1) (16)
3
5. (a) Determine the inverse z-transform of X(z)=z(z+1)/(z-0.5) , z>0.5 (8)
(b) Determine the z-transform of x(n)=cos wn u(n) (8)
6. State and prove the following properties of z-transform: (i) Time shifting
(ii) time reversal (iii) Differentiation and (iv) scaling in z domain. (16)
UNIT- III
PART – B
1. (a) Compute 4- point DFT of a causal three sample sequence is given by,
x(n) = 1/3, 0≤n≤2
= 0, else (8)
(b) State and prove shifting property of DFT. (8)
2. Derive and draw the radix -2 DIT algorithm for FFT of 8 points. (16)
3. Compute the DFT for the sequence {1, 2, 0, 0, 0, 2, 1, 1} using radix -2
DIF FFT and radix -2 DIT- FFT algorithm. (16)
4. Find the output y(n) of a filter whose impulse response is h(n) = {1, 1, 1}
and input signal x(n) = {3, -1, 0, 1, 3, 2, 0, 1, 2, 1} using Overlap add and
Overlap save method. (16)
6. An LTI system has the input x(n) = {1, 1, 1} and the impulse response
h(n)= {-1, -}.Determine the response of LTI system by radix -2 DIT FFT
(16)
UNIT IV
PART – B
1. With a neat sketch explain the design of IIR filter using impulse invariant
transformation. (16)
2
2. (a) Apply impulse invariant transformation to H(s) = (s +1) (s + 2)
with T =1sec and find H(z) (8)
(b) Describe bilinear transformation mapping for designing IIR filter. (8)
3. For a given specifications of the desired low pass filter given below,
0.707 ≤ |H(ω)| ≤1.0, 0 ≤ ω ≤ 0.2π
|H(ω)| ≤ 0.08, 0.4 π ≤ ω ≤ π,
design a Butterworth filter using bilinear transformation. (16)
4. Explain the procedural steps in the design of low pass digital Butterworth
filter and list its properties. (16)
6.List the three well known methods of design technique for IIR filters and
explain any one. (16)
2
(b). Apply Bilinear Transformation to H(s)= ------------- with T=0.1 sec.
(s+2)(s+3) (8)
UNIT-V
PROGRAMMABLE DSP CHIPS
PART- A (2 MARKS)
1. What are the factors that influence the selection of DSPs?
2. What are the different buses of TMS 320C54x processor and list their
functions
3. What are the shift instructions in TMS 320 C54x?
4. List the on-chip peripherals of C54x processor.
5. List the various registers used with ARAU.
6. What are the advantages and disadvantages of C54x architecture?
PART- B