Professional Documents
Culture Documents
Selection Tools
on Menu: Select>
2. Selection Cursor:
Based on the predefined selection mode it will select the
elements
To set the selection mode
Select > Configure selection filter
5. By Range
Based on the currently active cursor ( nodes cursor, beams
cursor etc) it will select the elements within a volume defined
by the plane and axis range
e.g. XY... in the range of Z=1 to 10
To create a group
1. Select the elements
2. Menu: Tools > Create New Group
6. By group name
If element groups are defined in the model, the For first time:
relavent elements in the group and can be 3.1 Enter group name and select the
selected based on the group name. element type
3.2 Assign methods: Associate to
selected geometry and click assign
7. Entity at Node
Based on the node number its connected elements can be selected.
Similarly Entity Connects beam, etc can be used to select the beams that are connected
to the selected beam number.
8. By All
To select all elements by its category ( all beams, all nodes etc.)
9. By Inverse
Selects the elements that are not selected already.
10. By List
used to select the elements by its element number
Ranges can be defined as:e.g.
1 to 10, 15 , 16 , 25 to 30 --->
to select element from 1 to 10 , 15 and 16, and 25 to 20
11. By specification
To select elements based on the "Specification" that are
assigned to them.
Managing Views
Tip:
By creating a "new view" with fewer elements the PC performance will be good.
To retrieve View
View > Open View