You are on page 1of 2

12.07.

2018 Compare properties

Home Steel Numbers Steel and Cast Iron Standards Alloy Standards Search Buy / Sell Product Worldwide Equivalents About Us

Compare Properties
S275JR ( 1.0044 ) S355JR ( 1.0045 )

Grade / Number : S275JR (1.0044)


EN 10025-2: 2004 Hot rolled products of structural steels. Technical delivery conditions for non-alloy
Standard:
structural steels
Classification: Non-alloy quality structural steel

Grade / Number : S355JR (1.0045)

EN 10025-2: 2004 Hot rolled products of structural steels. Technical delivery conditions for non-alloy
Standard:
structural steels
Classification: Non-alloy quality structural steel

Chemical composition % of S275JR (1.0044)


Nominal thickness =< 40(mm) C max = 0.21
Nominal thickness =< 40(mm) CEV max = 0.40

C Mn P S N Cu CEV
max 0.22 max 1.5 max 0.04 max 0.04 max 0.012 max 0.55 max 0.42

Chemical composition % of S355JR (1.0045)


Nominal thickness =< 30(mm) CEV max = 0.45

C Si Mn P S N Cu CEV

max 0.24 max 0.55 max 1.6 max 0.04 max 0.04 max 0.012 max 0.55 max 0.47

Mechanical properties S275JR (1.0044)

Nominal thickness (mm): to 16 16 - 40 40 - 63 63 - 80 80 - 100 100 - 150 150 - 200 200 - 250
ReH - Minimum yield strength (MPa) Flat and long
275 265 255 245 235 225 215 205
products

Nominal thickness (mm): to 3 3 - 100 100 - 150 150 - 250


Rm - Tensile strength (MPa) Flat and long products 430-580 410-560 400-540 380-540

Nominal thickness (mm): 3 - 40 40 - 63 63 - 100 100 - 150 150 - 250


A - Min. elongation Lo = 5,65 √ So (%) parallel, 23 22 21 19 18

Nominal thickness (mm): to 1 1 - 1.5 1.5 - 2 2 - 2.5 2.5 - 3


A - Min. elongation Lo = 80 mm (%) parallel, 15 16 17 18 19

-20° 0° +20°
KV - Impact energy (J) longitud.,
27 27 27

Mechanical properties S355JR (1.0045)

Nominal thickness (mm): to 16 16 - 40 40 - 63 63 - 80 80 - 100 100 - 150 150 - 200 200 - 250
ReH - Minimum yield strength (MPa) Flat and long
355 345 335 325 315 295 285 275
products

Nominal thickness (mm): to 3 3 - 100 100 - 150 150 - 250


Rm - Tensile strength (MPa) Flat and long products 510-680 470-630 450-600 450-600

Nominal thickness (mm): 3 - 40 40 - 63 63 - 100 100 - 150 150 - 250


A - Min. elongation Lo = 5,65 √ So (%) parallel, 22 21 20 18 17

Nominal thickness (mm): to 1 1 - 1.5 1.5 - 2 2 - 2.5 2.5 - 3


A - Min. elongation Lo = 80 mm (%) parallel, 14 15 16 17 18

-20° 0° +20°
KV - Impact energy (J) longitud.,
27 27 27

http://www.steelnumber.com/en/compare_steel_eu.php?name_id_3=3&name_id_4=8&count_mat=19 1/2
12.07.2018 Compare properties

Properties S275JR (1.0044)


Weldability: This steel grade is generally suitable to welding

Equivalent grades S275JR (1.0044)


European
EU USA Germany Japan France England Canada Italy Belgium Spain China Sweden Poland Czechia Finland Austria Nor
old
EN - DIN,WNr JIS AFNOR BS HG UNI NBN UNE GB SS PN CSN SFS ONORM N
EN

A283D RSt42-2 SS400 E28-2 161-430 260W Fe430B Fe430B AE295B AE255B Q225A 1411 St4V 11425 Fe44B St42F NS12
S275JR A529 St 44-2 43A 260WT Q275Z 1412 St430B
Gr.D 43B
(1.0044)

Equivalent grades S355JR (1.0045)


European
EU USA Germany Japan France England Canada Italy Belgium Spain China Sweden Inter Portugal India
old
EN - DIN,WNr JIS AFNOR BS HG UNI NBN UNE GB SS ISO NP IS
EN

A572 St52-3 SM490A E36-2 50B 350W Fe510B Fe510B AE355B AE355B Q345B 2132- E355C FE510- IS961
S355JR A678Gr.A SS490 350WT Q345C 01 Fe510B B
SSGrade50
(1.0045)

Mechanical properties
Mechanische Eigenschaften
Caracteristiques mecaniques
ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d�elasticite minimale
Rm Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc

European Steel and Alloy Grades / Numbers Searchable Database © 2011- 2018 All rights reserved. About us. Contacts.
The contents from this Steel & Alloy Database may not be reproduced. The entire risk as to use of these content is assumed by you the user
Google+ SteelNumber

http://www.steelnumber.com/en/compare_steel_eu.php?name_id_3=3&name_id_4=8&count_mat=19 2/2

You might also like