Professional Documents
Culture Documents
Condensed
Catalog
EBTRON
®
a eas a le d e en e
Advantage III EB-Flow SERVAIRE CENSus IAQSENS BRIDGE ALERT
EBTRON Gold Series
®
Advantage III
GTx116-P+
A ow M t w th T p t A
C p ty
OVERVIEW
SPECIFICATIONS: GTx116-P+
General Sensor Probe Assembly
Probe and Sensor Node Configurations (max.) Tube
2 probes x 8 sensor nodes/probe Material: Gold anodized 6063 aluminum (316 stainless steel with
4 probes x 4 sensor nodes/probe /SS option)
Installed Airflow Accuracy1 Mounting Brackets
Ducts/Plenum: ±3% of reading Material: 304 stainless steel
Non-ducted OA Intakes: better than or equal to ±5% of reading Mounting Options & Standard Size Limits2
P+ Sensor Density Rules Insertion and Stand-off: 6 to 120 in. [152.4 to 3048 mm]
Internal: 8 to 120 in. [203.2 to 3048 mm]
Area (sq.ft.) Sensor Area (sq.ft.) Sensor Probe to Transmitter Cables
[sq.m] Nodes [sq.m] Nodes Type: FEP jacket, plenum rated CMP/CL2P, UL/cUL listed, -67 to
392 ⁰F [-55 to 200 ⁰C], UV tolerant
≤ 0.5 [0.046] 1 > 4 & ≤ 8 [0.743] 8 Standard Lengths: 10, 15, 20, 25, 30, 40 and 50 ft. [3.1, 4.6, 6.1,
> 0.5 & ≤ 1 [0.092] 2 > 8 & ≤ 12 [1.11] 12 7.6, 9.1, 12.2, and 15.2 m]
Connecting Plug: 13/16” [20.63 mm] nominal diameter with gold-
> 1 & ≤ 2 [0.185] 4 > 12 & ≤ 14 [1.30] 14 plated connector pins
> 2 & ≤ 4 [0.371] 6 > 14 [1.30] 16
Transmitter
Power Requirement: 24 VAC (22.8 to 26.4 under load) @20V-A
Sensor Node Averaging Method Connector Receptacle Pins and PCB Connections: Gold-plated
Airflow: Independent, arithmetic average receptacle pins, PCB interconnects, PCB edge fingers, and test points
Temperature: Independent, velocity weighted or arithmetic average User Interface: 16-character LCD display and 4 button interface
Listings B.A.S. Connectivity Options
UL: UL 873 Listed GTC116 Transmitter: Two field selectable (0-5/0-10 VDC or
CE: European shipments only 4-20mA), scalable and isolated analog output signals (AO1=airflow,
BACnet International: BTL Listed (GTC116 and GTM116 AO2=temperature or alarm) plus one field selectable (BACnet MS/TP
transmitters) or Modbus RTU) and isolated RS-485 network connection -
Environmental Limits Individual sensor node airflow rates and temperatures are available
Temperature: via the network
Probes: -20 to 160 ⁰F [-28.9 to 71.1 ⁰C] GTM116 Transmitter: Two field selectable (0-5/0-10 VDC or
Transmitter: -20 to 120 ⁰F [-28.9 to 48.9 ⁰C] 4-20mA), scalable and isolated analog output signals (AO1=airflow,
Humidity: (non-condensing) AO2=temperature or alarm) plus one isolated Ethernet
Probes: 0 to 100% (simultaneously supported BACnet Ethernet or BACnet IP, Modbus
Transmitter: 5 to 95% TCP and TCP/IP) network connection - Individual sensor node
airflow rates and temperatures are available via the network
Individual Sensing Nodes GTL116 Transmitter: One isolated Lonworks Free Topology
Sensing Node Sensors network connection
Self-heated sensor: Precision, hermetically sealed, bead-in-glass GTD116 Transmitter: One USB connection for thumb drive data-
thermistor probe logging of sensor node airflow rates and temperatures over specified
Temperature sensor: Precision, hermetically sealed, bead-in-glass time intervals
thermistor probe Airflow Alarm
Sensing Node Housing Type: Low and/or high user defined setpoint alarm
Material: Glass-filled Polypropylene (Kynar® with /SS option) Tolerance: User defined % of setpoint
Sensor Potting Materials: Waterproof marine epoxy Delay: User defined
Sensing Node Internal Wiring Zero Disable: Alarm can be disabled when the airflow rate falls
Type: Kynar® coated copper below the low limit cutoff value (unoccupied periods)
Airflow Measurement Reset Method: Manual or automatic
Accuracy: ±2% of reading to NIST-traceable airflow standards Visual Indication: Yes, LCD display
(includes transmitter uncertainty) Network Indication: Yes (GTC116 and GTM116 only)
Calibrated Range: 0 to 5,000 fpm [25.4 m/s] Analog Signal Indication: Yes, on AO2 assignment
Calibration Points: 16 System Status Alarm
Temperature Measurement Type: Sensor diagnostic system trouble indication
Accuracy: ±0.15⁰F [0.08 ⁰C] to NIST-traceable temperature Visual Indication: Yes, LCD display
standards (includes transmitter uncertainty) Network Indication: Yes (GTC116 and GTM116 only)
Calibrated Range: -20 to 160 ⁰F [-28.9 to 71.1 ⁰C] Analog Signal Indication: Yes, on AO2 assignment
GTx116-P+_Overview_r3a
Calibration Points: 3 EB-Link Infra-red Interface (with /EL option): Provides individual
airflow and temperature data to an EB-Link Reader
1
Installed airflow accuracy is the actual system accuracy expected and includes sampling uncertainty of the sensor probes when installation meets or exceeds placement guidelines.
2
Custom probes are available up to 192 inches. Sensing nodes/probe limitations apply on sizes greater than 120 inches to ensure structural stability of the probe tube and may not
meet P+ sensor density rules. Contact factory for more information.
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON Hybrid Series
®
Advantage III
HTx104-PE
A ow M t w th T p t A
C p ty
OVERVIEW
The HTx104-PE is EBTRON’s most economical solution for larger systems when “out-of-
the-box” installed accuracy is not required and field adjustment is acceptable. Perfect
for LEED outdoor air delivery monitoring or other low sensor density airflow
measurement applications.
SPECIFICATIONS: HTx104-PE
General Sensor Probe Assembly
Probe and Sensor Node Configurations (max.) Tube
1 probes x 4 sensor nodes/probe Material: Gold anodized 6063 aluminum (316 stainless steel with
2 probes x 2 sensor nodes/probe /SS option)
Installed Airflow Accuracy1 Mounting Brackets
Ducts/Plenum ≤ 2 sq.ft. [0.18 sq.m]: ±3% of reading Material: 304 stainless steel
All other applications and sizes: Unspecified Mounting Options & Standard Size Limits2
PE Sensor Density Rules (typical) Insertion, and Stand-off: 6 to 120 in. [152.4 to 3048 mm]
Internal: 8 to 120 in. [203.2 to 3048 mm]
Area (sq.ft.) Sensor Probe to Transmitter Cables
[sq.m] Nodes Type: FEP jacket, plenum rated CMP/CL2P, UL/cUL listed, -67 to
392 ⁰F [-55 to 200 ⁰C], UV tolerant
≤ 0.5 [0.046] 1 Standard Lengths: 10, 15, 20, 25, 30, 40 and 50 ft. [3.1, 4.6, 6.1,
> 0.5 & ≤ 1 [0.092] 2 7.6, 9.1, 12.2 and 15.2 m]
Connecting Plug: 0.60” [15.24 mm] circular DIN
> 1 [0.092] 4
Sensor Node Averaging Method
Transmitter
Airflow: Independent, arithmetic average Power Requirement: 24 VAC (22.8 to 26.4 under load) @11V-A
Temperature: Independent, velocity weighted or arithmetic average PCB Connections: Gold-plated PCB interconnects and test points
Listings User Interface: 16-character LCD display and 4 button interface
UL: UL 873 Listed B.A.S. Connectivity Options
CE: European shipments only HTA104 Transmitter: Two field selectable (0-5/0-10 VDC or
BACnet International: BTL Listed (HTN104 transmitter) 4-20mA), scalable and isolated analog output signals (AO1=airflow,
Environmental Limits AO2=temperature or alarm)
Temperature: HTN104 Transmitter: One field selectable (BACnet MS/TP or
Probes: -20 to 160 ⁰F [-28.9 to 71.1 ⁰C] Modbus RTU) and isolated RS-485 network connection- Individual
Transmitter: -20 to 120 ⁰F [-28.9 to 48.9 C] sensor node airflow rates and temperatures are available via the
Humidity: (non-condensing) network
Probes: 0 to 100% Airflow Alarm
Transmitter: 5 to 95% Type: Low and/or high user defined setpoint alarm
Tolerance: User defined % of setpoint
Delay: User defined
Individual Sensing Nodes Zero Disable: Alarm can be disabled when the airflow rate falls
Sensing Node Sensors below the low limit cutoff value (unoccupied periods)
Self-heated sensor: Precision, hermetically sealed, bead-in-glass Reset Method: Manual or automatic
thermistor probe Visual Indication: Yes, LCD display
Temperature sensor: Precision, hermetically sealed, bead-in-glass Network Indication: Yes (HTN104 only)
thermistor probe Analog Signal Indication: Yes, on AO2 assignment (HTA104 only)
Sensing Node Housing System Status Alarm
Material: Glass-filled Polypropylene (Kynar® with /SS option) Type: Sensor diagnostic system trouble indication
Sensor Potting Materials: Waterproof marine epoxy Visual Indication: Yes, LCD display
Sensing Node Internal Wiring Network Indication: Yes (HTN104 only)
Type: Kynar® coated copper Analog Signal Indication: Yes, on AO2 assignment (HTA104 only)
Airflow Measurement
Accuracy: ±2% of reading to NIST-traceable airflow standards
(includes transmitter uncertainty)
Calibrated Range: 0 to 5,000 fpm [0 to 25.4 m/s]
Calibration Points: 16
Temperature Measurement
Accuracy: ±0.15 ⁰F [0.08 ⁰C] to NIST-traceable temperature
standards (includes transmitter uncertainty)
Calibrated Range: -20 to 160 ⁰F [-28.9 to 71.1 ⁰C]
Calibration Points: 3
HTx104-PE_Overview_r3a
1
Installed airflow accuracy is the actual system accuracy expected and includes sampling uncertainty of the sensor probes when installation meets or exceeds placement guidelines.
2
Custom probes are available up to 192 inches. Contact factory for more information.
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON Series 2000
®
EB-Flow
EF-x2000-T
A ow M t w th T p t A
C p ty
OVERVIEW
“Plug-and-Play” Operation
Laboratory Pressurization Provide Acceptable IAQ Intuitive User Interface
Save Energy Waterproof Sensor Assembly
Reduce Liability FEP Plenum Rated Cable
Improve Performance
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON
®
SPECIFICATIONS: EF-x2000-T
General Transmitter
Probe and Sensor Node Configurations Power Requirement: 24 VAC (22.8 to 26.4 under load) @8V-A
1 probe x 1 sensor node/probe (4 inch [101.6 mm] probe) User Interface: 16-character LCD display and 4 button interface
1 probe x 2 sensor nodes/probe (5 to 16 inch [127.0 to 406.4 mm] B.A.S. Connectivity Options
probes) EF-A2000 Transmitter: Two field selectable (0-5/1-5/0-10/2-10
Installed Airflow Accuracy1 VDC*), scalable and protected analog output signals (AO1=airflow,
Typically better than ±3% of reading AO2 = temperature or alarm)
Sensor Node Averaging Method * The VDC output circuit of the EF-A2000 transmitter can drive the
Airflow: Independent arithmetic average input circuit of devices designed to measure 4-wire current loops with
Temperature: Independent, velocity weighted or arithmetic average a resistive load ≥250 ohms.
Listings EF-N2000 Transmitter: One field selectable (BACnet MS/TP or
UL: 60730-1; UL 60730-2-9 (HVAC Controls) Modbus RTU) and non-isolated RS-485 network connection -
Environmental Limits Individual sensor node airflow rates and temperatures are available
Temperature: via the network (provide individual 24 VAC transformers at each
Probes 0 to 2,000 fpm [0 to 10.16 m/s]: EF-N2000 transmitter for applications requiring isolated RS-485)
-20 to 160 ⁰F [-28.9 to 71.1 ⁰C] Relay
Probes 0 to 3,000 fpm [0 to 15.24 m/s]: Type: Dry Contact w/ onboard jumper to drive a remote LED
0 to 160 ⁰F [-17.8 to 71.1 ⁰C] (R1=alarm)
Transmitter: -20 to 120 ⁰F [-28.9 to 48.9 ⁰C] Status: N.O. or N.C. via user setup configuration
Humidity: (non-condensing) Rating: 30 VDC or 24 VAC @ 3 amp. max.
Probes: 0 to 100% Airflow Alarm
Transmitter: 5 to 95% Type: Low and/or high user defined setpoint alarm
Tolerance: User defined % of setpoint
Individual Sensing Nodes Delay: User defined
Sensing Node Sensors Zero Disable: Alarm can be disabled when the airflow rate falls
Self-heated sensor: Precision, hermetically sealed, bead-in-glass below the low limit cutoff value (unoccupied periods)
thermistor probe Reset Method: Manual or automatic
Temperature sensor: Precision, hermetically sealed, bead-in-glass Visual Indication: Yes, LCD display
thermistor probe Network Indication: Yes (EF-N2000 only)
Sensing Node Housing Analog Signal Indication: Yes, on AO2 assignment (EF-A2000
Material: Glass-filled Polypropylene (Kynar® with /SS option) only)
Sensor Potting Materials: Waterproof marine epoxy Contact Closure Relay: Yes, on R1 assignment
Sensing Node Internal Wiring System Status Alarm
Type: Kynar® coated copper Type: Sensor diagnostic system trouble indication
Airflow Measurement Visual Indication: Yes, LCD display
Accuracy: ±3% of reading to volumetric airflow standards (includes Network Indication: Yes (EF-N2000 only)
transmitter uncertainty) Analog Signal Indication: Yes, on AO2 assignment (EF-A2000
Calibrated Range: 0 to 3,000 FPM [0 to 15.24 m/s] only)
Calibration Points: 7 Contact Closure Relay: Yes, on R1 assignment
Temperature Measurement
Accuracy: ±0.15⁰F [0.08 ⁰C] to NIST-traceable temperature
standards (includes transmitter uncertainty)
Calibrated Range: -20 to 160 ⁰F [-28.9 to 71.1 ⁰C]
Calibration Points: 3
1
Installed airflow accuracy is the actual system accuracy expected and includes sampling uncertainty of the sensor probes when installation meets or exceeds placement guidelines.
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON Series 1000
®
EB-Flow
EF-x1000-T
A ow M t w th T p t C p ty
OVERVIEW
The EF-x1000-T (ELF) is EBTRON’s economical measurement solution for round ducts
between 4 and 16 inches in diameter. Ideal for most small duct airflow measurement
and volumetric airflow tracking applications. Low flow performance, temperature
capability and connectivity options makes this a better choice than traditional
differential pressure averaging arrays, rings and crosses.
SPECIFICATIONS: EF-x1000-T
General Integral Transmitter
Probe and Sensor Node Configurations Power Requirement: 24 VAC (22.8 to 26.4 under load) @5V-A
1 probe x 1 sensor node/probe (4 inch [101.6 mm] probe) User Interface: DIP switch
1 probe x 2 sensor nodes/probe (5 to 16 inch [127.0 to 406.4 mm] B.A.S. Connectivity Options
probes) EF-A1000 Transmitter: One field selectable (0-10/2-10 VDC* or
Installed Airflow Accuracy1 0-5/1-5 VDC* - specify at time of order), scalable and protected
Typically better than ±3% of reading analog output signal (AO1=airflow)
Sensor Node Averaging Method EF-A1001 Transmitter: Two field selectable (0-10/2-10 VDC* or
Airflow: Independent arithmetic average 0-5/1-5 VDC* - specify at time of order), scalable and protected
Temperature: Independent velocity weighted average analog output signals (AO1=airflow, AO2 = temperature)
Listings * The VDC output circuit of the EF-A1000 transmitter can drive the
UL (EF-A1000-T): 60730-1; UL 60730-2-9 (HVAC Controls) input circuit of devices designed to measure 4-wire current loops with
Environmental Limits a resistive load ≥250 ohms.
Temperature: EF-N1000 Transmitter: One field selectable (BACnet MS/TP or
Probes 0 to 2,000 fpm [0 to 10.16 m/s]: Modbus RTU) and non-isolated RS-485 network connection -
-20 to 120 ⁰F [-28.9 to 48.9 ⁰C] Individual sensor node airflow rates and temperatures are available
Probes 0 to 3,000 fpm [0 to 15.24 m/s]: via the network (provide individual 24 VAC transformers at each
0 to 120 ⁰F [-17.8 to 48.9 ⁰C] EF-N1000 transmitter for applications requiring isolated RS-485)
Transmitter: -20 to 120 ⁰F [-28.9 to 48.9 ⁰C] System Status Alarm
Humidity: (non-condensing) Type: Sensor diagnostic system trouble indication
Probes: 0 to 100% Visual Indication: Yes, LED on circuit board
Transmitter: 5 to 95% Network Indication: Yes (EF-N1000 only)
1
Installed airflow accuracy is the actual system accuracy expected and includes sampling uncertainty of the sensor probes when installation meets or exceeds placement guidelines.
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON Series 2000
®
EB-Flow
EF-x2000-U
A ow M t w th T p t A
C p ty
OVERVIEW
The EF-x2000-U is a cost effective measurement solution for smaller rooftop packaged
units, fan coils and classroom ventilators. Available with adjustable standoff or insertion
mount universal probes. Dual airflow output capability makes it ideal for outdoor air
and exhaust airflow measurement in RTUs with powered exhaust and in energy/heat
recovery ventilators.
“Plug-and-Play” Operation
Classroom Unit Ventilator Save Energy Intuitive User Interface
Outdoor Air Delivery Reduce Liability Waterproof Sensor Assembly
Monitoring
Improve Performance FEP Plenum Rated Cables
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON
®
SPECIFICATIONS: EF-x2000-U
General Transmitter
Probe and Sensor Node Configurations Power Requirement: 24 VAC (22.8 to 26.4 under load) @8V-A
1 probe x 1 sensor node User Interface: 16-character LCD display and 4 button interface
2 probes x 1 sensor node/probe B.A.S. Connectivity Options
Installed Airflow Accuracy1 EF-A2000 Transmitter: Two field selectable (0-5/1-5/0-10/2-10
Typically better than ±10% of reading VDC), scalable and protected analog output signals (AO1=airflow or
Sensor Node Averaging Method airflow 1, AO2=airflow 2, temperature or alarm)
Airflow: Independent (arithmetic average on 2 sensor configurations * The VDC output circuit of the EF-A2000 transmitter can drive the
installed at a single measurement location) input circuit of devices designed to measure 4-wire current loops with
Temperature: Independent (velocity weighted or arithmetic average a resistive load ≥250 ohms.
on 2 sensor configurations installed at a single measurement EF-N2000 Transmitter: One field selectable (BACnet MS/TP or
location) Modbus RTU) and non-isolated RS-485 network connection -
Listings Individual sensor node airflow rates and temperatures are available
UL: 60730-1; UL 60730-2-9 (HVAC Controls) via the network (provide individual 24 VAC transformers for each
Environmental Limits EF-N2000 transmitter for applications requiring isolated RS-485)
Temperature: Relay
Probes 0 to 2,000 fpm [0 to 10.16 m/s]: Type: Dry Contact w/ onboard jumper to drive a remote LED
-20 to 160 ⁰F [-28.9 to 71.1 ⁰F] (R1=alarm)
Probes 0 to 3,000 fpm [0 to 15.24 m/s]: Status: N.O. or N.C. via user setup configuration
0 to 160 ⁰F [-17.8 to 71.1 ⁰C] Rating: 30 VDC or 24 VAC @ 3 amp. max.
Transmitter: -20 to 120 ⁰F [-28.9 to 48.9 ⁰C] Airflow Alarm
Humidity: (non-condensing) Type: Low and/or high user defined setpoint alarm
Probes: 0 to 100% Tolerance: User defined % of setpoint
Transmitter: 5 to 95% Delay: User defined
Zero Disable: Alarm can be disabled when the airflow rate falls
Individual Sensing Nodes below the low limit cutoff value (unoccupied periods)
Sensing Node Sensors Reset Method: Manual or automatic
Self-heated sensor: Precision, hermetically sealed, bead-in-glass Visual Indication: Yes, LCD display
thermistor probe Network Indication: Yes (EF-N2000 only)
Temperature sensor: High-performance encapsulated chip Analog Signal Indication: Yes, on AO2 assignment (EF-A2000
thermistor with parylene coating only)
Sensing Node Housing Contact Closure Relay: Yes, on R1 assignment
Material: Glass-filled Polypropylene System Status Alarm
Sensor Potting Materials: Waterproof marine epoxy Type: Sensor diagnostic system trouble indication
Sensing Node Internal Wiring Visual Indication: Yes, LCD display
Type: Kynar® coated copper Network Indication: Yes (EF-N2000 only)
Airflow Measurement Analog Signal Indication: Yes, on AO2 assignment (EF-A2000
Accuracy: ±3% of reading (typical), 4% max. to NIST-traceable only)
airflow standards (includes transmitter uncertainty) Contact Closure Relay: Yes, on R1 assignment
Calibrated Range: 0 to 3,000 fpm [0 to 15.24 m/s]
Calibration Points: 7
Temperature Measurement
Accuracy: ±0.36⁰F [0.2 ⁰C]
1
Installed airflow accuracy is the actual system accuracy expected and includes sampling uncertainty of the sensor probes when installation meets or exceeds placement guidelines.
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON Gold Series
®
Advantage III
GTx108-F/An
F A yA ow M t w th T p t
A C p ty
OVERVIEW
SPECIFICATIONS: GTx108-F/An
General Transmitter
Probe and Sensor Node Configurations Power Requirement: 24 VAC (22.8 to 26.4 under load) @16V-A
Fan Arrays (less than or equal to 4 fans): 2 probes x 1 sensor Connector Receptacle Pins and PCB Connections: Gold-plated
node per probe or 1 probe x 1 sensor node per probe in each fan receptacle pins, PCB interconnects, PCB edge fingers, and test points
Fan Arrays (greater than 4 fans): 1 probe x 1 sensor node per User Interface: 16-character LCD display and 4 button interface
probe in each fan (8 probe maximum) B.A.S. Connectivity Options
Sensor Node Averaging Method GTC108 Transmitter: Two field selectable (0-5/0-10 VDC or
Airflow: Independent, arithmetic average per fan 4-20mA), scalable and isolated analog output signals (AO1=airflow,
Temperature: Independent, velocity weighted or arithmetic average AO2=temperature or alarm) plus one field selectable (BACnet MS/TP
Listings or Modbus RTU) and isolated RS-485 network connection- Individual
UL: UL 873 Listed sensor node airflow rates and temperatures are available via the
BACnet International: BTL Listed (GTC108 and GTM108 network - Individual fan airflow rates are available via the network
transmitters) GTM108 Transmitter: Two field selectable (0-5/0-10 VDC or
Environmental Limits 4-20mA), scalable and isolated analog output signals (AO1=airflow,
Temperature: AO2=temperature or alarm) plus one isolated Ethernet
Probes: -20 to 160 ⁰F [-28.9 to 71.1 ⁰C] (simultaneously supported BACnet Ethernet or BACnet IP, Modbus
Transmitter: -20 to 120 ⁰F [-28.9 to 48.9 ⁰C] TCP and TCP/IP) network connection - Individual sensor node
Humidity: (non-condensing) airflow rates and temperatures are available via the network -
Probes: 0 to 100% Individual fan airflow rates are available via the network
Transmitter: 5 to 95% GTL108 Transmitter: One isolated Lonworks Free Topology
network connection - Individual fan airflow rates and temperatures
Individual Sensing Nodes are NOT available via the network on multiple fan systems
Sensing Node Sensors GTD108 Transmitter: One USB connection for thumb drive data-
Self-heated sensor: Precision, hermetically sealed, bead-in-glass logging of sensor airflow and temperature over specified time
thermistor intervals
Temperature sensor: Precision, hermetically sealed, bead-in-glass Airflow Alarm
thermistor Type: Low and/or high user defined setpoint alarm
Sensing Node Housing Tolerance: User defined % of setpoint
Material: Glass-filled Polypropylene Delay: User defined
Sensor Potting Materials: Waterproof marine epoxy Zero Disable: Alarm can be disabled when the airflow rate falls
Airflow Measurement below the low limit cutoff value (unoccupied periods)
Accuracy: ±2% of reading to NIST-traceable airflow standards Reset Method: Manual or automatic
(includes transmitter uncertainty) Visual Indication: Yes, LCD display
Calibrated Range: 0 to 10,000 fpm [0. to 50.8 m/s] Network Indication: Yes (GTM108 and GTC108 only)
Calibration Points: 16 Analog Signal Indication: Yes, on AO2 assignment
Temperature Measurement Fan Alarm
Accuracy: ±0.15⁰F [0.08 ⁰C] to NIST-traceable temperature Type: Minimum airflow, % deviation from median airflow, or %
standards (includes transmitter uncertainty) deviation from maximum airflow stored in memory
Calibrated Range: -20 to 160 ⁰F [-28.9 to 71.1 ⁰C] Tolerance: User defined % of setpoint
Calibration Points: 3 Delay: User defined
Zero Disable: Alarm can be disabled when the airflow rate falls
Sensor Probe Assembly below the low limit cutoff value (unoccupied periods)
Reset Method: Manual or automatic
Mounting Rods
Visual Indication: Yes, LCD display
Material: Zinc plated steel
Network Indication: Yes (GTM108 and GTC108 only)
Mounting Brackets
Analog Signal Indication: Yes, on AO2 assignment
Material: 304 stainless steel
System Status Alarm
Mounting Options & Size Limits
Type: Sensor diagnostic system trouble indication
Forward: 6 to 64 inches [152.4 to 1676.4 mm] (diameter at inlet
Visual Indication: Yes, LCD display
entrance)
Network Indication: Yes
Face: 11 to 77 inches [152.4 to 1625.6 mm] (diameter at inlet
Analog Signal Indication: Yes, on AO2 assignment
entrance)
EB-Link Infra-red Interface (with /EL option): Provides individual
Flare: 6 to 57 inches [279.4 to 1955.8 mm] (opening size at
airflow and temperature data to an EB-Link Reader
backdraft damper inlet)
Probe to Transmitter Cables
GTx108-F_An_Overview_r3a
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON Gold Series
®
Advantage III
GTx108-F(/SI & /DI)
SWSI & DWDI A ow M t w th T p t
A C p ty
OVERVIEW
The GTx108-F/SI and GTx108-F/DI are EBTRON’s solution for accurate and repeatable
airflow measurement in SWSI and DWDI fans. Airflow, temperature and/or airflow
alarming are available on all models. Does not affect SWSI or DWDI fan performance.
Brackets
Standards “Plug and Play” Operation
Save Energy Intuitive User Interface
Reduce Fan Horsepower FEP Plenum Rated Cables
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON
®
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON Hybrid Series
®
Advantage III
HTx104-F(/SI & /DI)
SWSI & DWDI A ow M t w th T p t
A C p ty
OVERVIEW
The HTx104-F/SI and HTx104-F/DI are EBTRON’s most economical solution for accurate
and repeatable airflow measurement in SWSI and DWDI fans. Airflow, temperature
and/or airflow alarming are available on all models. Does not affect SWSI or DWDI fan
performance.
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON
®
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON Series 2000
®
EB-Flow
EF-x2000-B
B A ow M t w th T p t
A C p ty
OVERVIEW
The EF-x2000-B is a unique measurement device that can detect very small pressure
differentials (as low as 0.0002” H2O) between two adjacent spaces by sensing the
airflow rate induced by the pressure gradient. The EF-x2000-B does not measure
pressure directly but can be used to determine the approximate pressure differential
when the proper flow coefficient for the installation is determined.
SPECIFICATIONS: EF-x2000-B
General Transmitter
Probe and Sensor Node Configuration Power Requirement: 24 VAC (22.8 to 26.4 under load) @8V-A
1 bi-directional, dual 1/2” NPT female bleed sensor housing User Interface: 16-character LCD display and 4 button interface
Listings B.A.S. Connectivity Options
UL: 60730-1; UL 60730-2-9 (HVAC Controls) EF-A2000 Transmitter: Two field selectable (0-5/1-5/0-10/2-10
Environmental Limits VDC), scalable and protected analog output signals (AO1=airflow or
Temperature: equivalent ∆P, AO2=temperature or alarm)
Sensor -2,000 to 2,000 fpm [-10.16 to 10.16 m/s]: * The VDC output circuit of the EF-A2000 transmitter can drive the
-20 to 160 ⁰F [-28.9 to 71.1 ⁰C] input circuit of devices designed to measure 4-wire current loops with
Sensor -3,000 to 3,000 fpm [-15.24 to 15.24 m/s]: a resistive load ≥250 ohms.
0 to 160 ⁰F [-17.8 to 71.1 ⁰C] EF-N2000 Transmitter: One field selectable (BACnet MS/TP or
Transmitter: -20 to 120 ⁰F [-28.9 to 48.9 C] Modbus RTU) and non-isolated RS-485 network connection -
Humidity: (non-condensing) Individual sensor node airflow rates and temperatures are available
Probes: 0 to 100% via the network (provide individual 24 VAC transformers for each
Transmitter: 5 to 95% EF-N2000 transmitter for applications requiring isolated RS-485)
Relay
Bleed Sensor Assembly Type: Dry Contact w/ onboard jumper to drive a remote LED
Sensing Node Sensors (R1=alarm)
Self-heated sensor: Two precision, hermetically sealed, bead-in- Status: N.O. or N.C. via user setup configuration
glass thermistor probes Rating: 30 VDC or 24 VAC @ 3 amp. max.
Temperature sensor: One precision, hermetically sealed, bead-in- Airflow (or Pressure) Alarm
glass thermistor probe Type: Low and/or high user defined setpoint alarm
Sensing Node Housing Tolerance: User defined setpoint value
Material: Glass-filled Polypropylene Delay: User defined
Sensor Potting Materials: Waterproof marine epoxy Reset Method: Manual or automatic
Airflow Measurement Visual Indication: Yes, LCD display
Accuracy: ±2% of reading to NIST-traceable airflow standards Network Indication: Yes (EF-N2000 only)
(includes transmitter uncertainty) Analog Signal Indication: Yes, on AO2 assignment (EF-A2000
Calibrated Range: -3,000 to 3,000 fpm [-15.24 to 15.24 m/s] only)
Calibration Points: 9 Contact Closure Relay: Yes, on R1 assignment
Temperature Measurement System Status Alarm
Accuracy: ±0.15⁰F [0.08 ⁰C] to NIST-traceable temperature Type: Sensor diagnostic system trouble indication
standards (includes transmitter uncertainty) Visual Indication: Yes, LCD display
Calibrated Range: -20 to 160 ⁰F [-28.9 to 71.1 ⁰C] Network Indication: Yes (EF-N2000 only)
Calibration Points: 3 Analog Signal Indication: Yes, on AO2 assignment (EF-A2000
Probe to Transmitter Cables only)
Type: FEP jacket, plenum rated CMP/CL2P, UL/cUL listed, -67 to Contact Closure Relay: Yes, on R1 assignment
392 ⁰F [-55 to 200 ⁰C], UV tolerant
Standard Lengths: 10, 25 and 50 ft. [3.1, 7.6 and 15.2 m]
Connecting Plug: 0.60” [15.24 mm] nominal diameter
EF-x2000-B_Overview_r3a
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON Series 100
®
SERVAIRE
SERVAIRE-E100
D t C t Co t tR kA ow/P
T p t Mo to
OVERVIEW
The SERVAIRE-E100 rack mount bidirectional airflow measurement device can detect
very small pressure differentials (as low as 0.0002" H20) across containment zones by
measuring the airflow bled across a false server. Temperature measurement of the
bleed airflow path is also provided.
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON
®
SPECIFICATIONS: SERVAIRE-E100
General
Probe and Sensor Node Configuration
1 bi-directional bleed sensor in a single rack mount housing
Environmental Limits
Temperature: -20 to 160 ⁰F [-28.9 to 71.1 ⁰C]
Humidity: (non-condensing) 5 to 95%
Integral Transmitter
Power Requirement: 110 VAC @ 8V-A
Power Redundancy: Dual independent redundant power supplies
User Interface: 16-character LCD display and 4 button interface
B.A.S. Connectivity
SERVAIRE-E100: One isolated Ethernet (simultaneously supported
BACnet Ethernet or BACnet IP, Modbus TCP and TCP/IP) network
connection - supports up to 10 simultaneous connections
Airflow (or Pressure) Alarm
Type: Low and/or high user defined setpoint alarm
Tolerance: User defined setpoint
Delay: User defined
Reset Method: Manual or automatic
Visual Indication: Yes, LCD display
Network Indication: Yes
System Status Alarm
Type: Sensor diagnostic system trouble indication
Visual Indication: Yes, LCD display
Network Indication: Yes
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON Series 100
®
CENSus
CENSUS-C100
Th I g gO p y Co t o S g W th
I t o Doo
OVERVIEW
The CENSus-C100 is a unique solution for reliable and cost effective occupancy counting.
Ideal for Demand Control Ventilation (DCV) applications. Designed for single width
interior doors or openings. Multiple counters can be installed on rooms with more than
one entry.
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON
®
SPECIFICATIONS: CENSUS-C100
General
Counting Technology: Dual sensor differential thermal imaging
Accuracy: Typically better than ±5% of actual population or 3 people,
whichever is greater
Environmental Limits
Temperature (recommended limits): 65 to 85 ⁰F [18.3 to 29.4 ⁰C]
Humidity: 5 to 95%
Sensor Assembly
Sensors: Two thermopile sensors
Mounting Options:
Standard: Install on overhead door jamb
Optional: Install above door opening with optional stand-off bracket
Maximum Recommended Opening Size: 42 in. [1.07 m]
Maximum Recommended Mounting Height: 96 in. [2.43 m]
Integral Transmitter
Power Requirement: 24 VAC (22.8 to 26.4 under load) @1.5V-A
B.A.S. Connectivity Options
CENSUS-C100: One 0-10 VDC, scalable and protected analog
output signal (AO1=occupancy count) and one field selectable
(BACnet MS/TP or Modbus RTU) and non-isolated RS-485 network
connection (provide individual 24 VAC transformers for each
CENSUS-C100 device for applications requiring isolated RS-485)
Enclosure
Enclosure: White powder coated formed steel
CENSUS-C100_Overview_r3a
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON Series 100, 200 & 300
®
IAQSENS
IAQ-Ny00-W
W - o t RS-485 Co to S o w th CO2,
T p t R tv H ty C p ty
OVERVIEW
The IAQSENS family of wall mounted devices simplifies wiring and installation by
providing up to three sensors over a single RS-485 connection. The device is available as
a stand-alone CO2 sensor, dual output RH/Temperature sensor or a combination of all
three.
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON
®
SPECIFICATIONS: IAQ-Ny00-W
General
Sensor Configurations
CO2 only - IAQ-N100-W
RH and Temperature only - IAQ-N200-W
CO2, RH and Temperature - IAQ-N300-W
Listings
BACnet International: BTL Listed
Environmental Limits (Recommended)
Temperature: 32 to 122 ⁰F [0 to 50 °C]
Humidity: 5 to 95%
Sensors
CO2 Sensor
Technology: Telaire 6613 Non Dispersive Infrared (NDIR)
Range: 0 to 2,000 ppm
Accuracy:
400 to 1,250 ppm ±30 ppm or 3% or reading, whichever is greater
1,250 to 2,000 ppm ±30 ppm
Temperature Dependence: 0.36% FS/°F [0.2% FS/°C]
Stability: <2% of FS over life of sensor (15 year typical)
Calibration Interval: Not required
Response Time: <2 minutes for 90% step change typical
Temperature Sensor
Technology: Integral Bandgap PTAT
Range: 32 to 122 ⁰F [0 to 50 °C]
Accuracy: ±1.08 ⁰F [0.6 °C] @77 ⁰F [25 °C]
Resolution: 0.36 ⁰F [0.2 °C]
Relative Humidity Sensor
Technology: Planar Capacitive Polymer
Range: 0 to 100% RH
Accuracy:
±3% <20% RH
±2% 20% to 80% RH
±3% >80% RH
Resolution: 0.4% RH
Integral Transmitter
Power Requirement: 24 VAC (22.8 to 26.4 under load) @1.5V-A
Printed Circuit Boards: Electroless nickel immersion gold (ENIG) plated
User Interface: DIP switch
B.A.S. Connectivity Options
IAQ-N100, IAQ-N200, IAQ-N300 Transmitters: One field selectable
(BACnet MS/TP or Modbus RTU) and isolated RS-485 network
connection
Supported Baud Rates: 9.6, 19.2, 38.4 and 76.8 kbaud
System Status Alarm
Type: Sensor diagnostic system trouble indication
Visual Indication: Yes, LED indication
Network Indication: Yes
Enclosure
Dimensions: 4.56H x 3.25W x 1.09D in. [115.8 x 82.6 x 27.7 mm]
SIAQ-Ny00_Overview_r3a
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON Series 100
®
BRIDGE
BRG-N100
RS-485 N two k B g w th Co g D p y
A C p ty
OVERVIEW
The BRG-N100 functions as an analog input to RS-485 network bridge. It supports both
BACnet MS/TP and Modbus RTU. In addition, it can bind to a remote BACnet object
(AO, AI or AV) to read BACnet devices without a dedicated B.A.S. network.
Satisfy Alarming
Requirments of Codes and
Standards
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON
®
SPECIFICATIONS: BRG-N100
General
User Interface: 16-character LCD display and 4 button interface
Input
Type: Analog Input (AI1)
Ranges:
Voltage: 0-10 VDC
Current: 4-20mA (from 4 wire source, no excitation voltage)
B.A.S. Connectivity Options
BRG-N100 Bridge: One field selectable (BACnet MS/TP or Modbus
RTU) and non-isolated RS-485 network connection for the scaled
network value of AI1, including units of measure - A remote BACnet
network object (AO, AI or AV) may be substituted for the physical
analog input (AI1) in applications that require an RS-485 BACnet
device be read without a B.A.S. network. Note: this functionality is
not available for Modbus devices. Provide individual 24 VAC
transformers at each BRG-N100 bridge for applications requiring
isolated RS-485.
Relay
Type: Dry contact w/ onboard jumper to drive a remote LED
(R1=alarm)
Status: N.O. or N.C. via user setup configuration
Rating: 30 VDC or 24 VAC @ 3 amp. Max.
Analog Input (AI1) Alarm
Type: Low and/or high user defined setpoint alarm
Tolerance: User defined % of setpoint or fixed value setpoint
Delay: User defined
Reset Method: Manual or automatic
Visual Indication: Yes, LCD display and red indicating LED
Network Indication: Yes
Contact Closure Relay Assignment: Yes, R1
Environmental Limits
Temperature: -20 to 120 ⁰F [-28.9 to 48.9 ⁰C]
Humidity: 5 to 95%
Power Requirement: 24 VAC (22.8 to 26.4 under load) @2.5V-A
Dimensions: 3.57H x 6.00W x 1.58D in. [90.7 x 152.4 x 40.1 mm]
BRG-N100_Overview_r3a
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON Series 100
®
ALERT
ALRT-100
A og I p t S g “S tR y” Th ho A
w th Lo LED I to
OVERVIEW
The ALRT-100 accepts a binary analog output signal for applications requiring local or
remote visual or contact closure alarming. The device provides a visual LED indication
as well as a contact closure relay capable of passing up to 3 amps at 30VDC or 24 VAC.
Low Cost
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
EBTRON
®
SPECIFICATIONS: ALRT-100
General
Input
Type: Analog input (AI1)
Ranges:
Voltage: 0-10 VDC
Current: 4-20 mA (from 4 wire source, no excitation voltage)
Relay:
Type: Dry contact w/onboard jumper to drive a remote LED
(R1=Alarm)
Status: N.O.
Rating: 30 VDC or 24 VAC @ 3 amp. Max.
Analog Input (AI1) Threshold Alarm
Type: Threshold alarm on AI1 > comparison threshold
Comparison Threshold:
Voltage: Fixed at 3 VDC
Current: Fixed at 6 mA
Delay: None
Reset Method: Automatic
Visual Indication: Yes, red LED
Contact Closure Relay Assignment: Yes, R1
Environmental Limits
Temperature: -20 to 120 ⁰F [-28.9 to 48.9 ⁰C]
Humidity: 5 to 95%
Power Requirement: 24 VAC (22.8 to 26.4 under load) @1.5V-A
Dimensions: 3.36H x 4.25W x 1.36D in. [85.2x108.0 x 34.5 mm]
ALRT-100_Overview_r3a
EBTRON • 1663 Hwy. 701 S., Loris SC 29569 • Toll Free: 800.2EBTRON (232.8766) • Fax: 843.756.1838 • Internet: EBTRON.com
ESC EBTRON GreenTrol GUI
® ®