Professional Documents
Culture Documents
MANAGEMENT
BSS
NSN
1. BTS POLLING
BSS
NSN
BSS
NSN
6. Connect TQ/RJ connector at FIU 19’ at Q1-1 port and D-9 pin connector at BTS Top at Q1_1Port.
BSS
NSN
12. In the BSC, add the FIU 19’ with that BCF by No. (For Example if we are connecting the FIU with Q1
address 1 to BCFno 48 and ) then,
ZQWA:BCF=48:TRE=2:1;
13. List the FIU 19’ with that BCF by No. (For Example if we have connected the FIU with BCFno 48)
then,
ZQWL:BCF=48;
Example output:-
EXECUTION STARTED
BUS
CHA BCF TRX BAUD Q1 EQU
NUM NUM NUM RATE TYPE INDEX ADDR EQUIPMENT TYPE GEN STATE
--- ---- --- ------ ---- ----- ---- --------------- --- ---------------------------------------------------------------------------
- 48 - 9600 TRE 1 4080 UltraSiteBTSHub Q1E -
- 48 - - TRE 2 1 Hopper 19 Q1E -
COMMAND EXECUTED
BSS
NSN
# TRE 2 got added to BCF 48 and so its EQUIPMENT TYPE will show “Hopper 19” (since FIU 19).
# If TRE 2 did not get added to BCF 48, its STATE will be in “UNINIT”.
For FIU TQ connector: Notch at left (connector) looking at conector bottom male pin: 1, then right
male: 2, top left female: 3 then right 4.
BSS
NSN