Professional Documents
Culture Documents
2. Who should take samples of materials and bring them to the lab. For acceptance
purp.
a. Dpwh m.e.
b. Contractors m.e.
c. Dpwh p.e.
d. Both dpwh and contractors m.e.
1. Scales for weighing aggregates and cement shall be accurate within ____ % throughout
the range of use. Scales shall be inspected and sealed as often as the Engineer may
deem necessary to assure their continued accuracy.
a) 1.0 % c) 0.5 %
b) 1.5 % d) 2.0 %
The concrete samples should be stored in a moist conditioned temperature within the
range of ____ until the time of test.
a) 18* C to 24* c) 14* C to 24* C
b) 15* C to 18* C d) 18* C to 28* C
Asphalt cement shall be homogenous, free from water, and shall no foam when heated to?
A.159 deg. Cel.
B.175 deg. Cel.
C.184 deg. Cel.
The highest moisture content in the plastic consistency of fine-grained soil is the
liquid limit
a. plastic limit
b. shrinkage limit
Which contractor are reqd by dpwh to own min. Material testing eqpmt. For pre-qualification purp.
A. Small
B. Medium
C. Large
D. All of the above
The uniform rate at which the movable head of the CBR machine travel is _____ .
a) 0.05 in / min c) 0.08 in /min
b) 0.10 in /min d) 0.09 in /min
Who should take samples of materials and bring them to the lab. For acceptance purp.
A. Dpwh m.e.
B. Contractors m.e.
C. Dpwh p.e.
D. Conctractors p.e.
after final rolling, the compacted asphalt pavement shall have a density equal to, or greater than ______% of the laboratory
compacted density.
a. 97
b. 95
The following are types of concrete stress, except ___________ . (Lumabas yan last sept. 2016 exam)
a. Ravelling
b. Crazing
c. Potholes
d. Pockmarks