Professional Documents
Culture Documents
PIPING MATERIALS
N° CMCC - GP - 401
CHILE
TABLE OF CONTENTS
1.0 Scope
5.0 Attachments:
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 2 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
1.0 SCOPE
1.1 Application
This specification covers the minimum requirements for the proper selection of
piping, valves, and fittings for the above and below ground process and utility piping
systems. This specification is complemented by the following attachments:
1.2 Requirements
Process and utility piping systems shall be designed and furnished in strict accordance
with this specification, drawings, and the Contract/ Purchase Order requirements. In
the event of conflict between the afore mentioned documents, this specification shall
govern. The requirements herein shall not take precedence over code requirements
except where more stringent than the code.
2.1 Codes
Design, materials, fabrication, and inspection shall conform to the latest editions of
the following codes, as identified on the class sheets.
• ANSI B 31.3 Code for Chemical Plant and Petroleum Refinery Piping
2.2 Standards
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 3 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
In addition to the Codes and their respective referenced codes and standards,
applicable standards from the following organizations shall apply:
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 4 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
3/4 20 20 25 20 20
1 25 25 32 25 25
1 1/4 32 32 40 32 32
1 1/2 40 40 50 40 40
2 50 50 63 50 50
3 80 80 90 80 80
4 100 100 110 100 100
6 150 150 2 180 150 150
8 200 200 225 200 200
10 250 250 280 250 2 250
12 300 300 315 300 2 300
14 350 350 355 350 2 350
16 400 400 400 400 2 400
18 450 450 450 450 2 450
20 500 500 500
24 600 600 630
28 700 700 710
2 30 750 750
32 800 800 800
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 5 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
1 Gate 1 1
2 Globe
3 Check
4 Butterfly Description/Serial N°
5 Ball
6 Diaphragm End Connection
7 Plug (1 - screwed)
8 Knife Gate (2 - flanged)
9 Relief (3 - Vic coupling)
Example: Valve N 421 is butterfly valve, flanged connection, first on the list of
butterfly valves.
4.1 The pressures and temperatures referred to are design conditions for the Piping Class.
The service working pressure and temperature for each system shall be below the
design pressure and temperature specified in the Class Sheets as indicated in
Attachment 5.3.
4.2 Materials with higher pressure, temperature, or better corrosion resistant properties
may be substituted for those specified, provided that none of the other properties are
reduced below the material specified. All substitutions are subject to the Piping
Engineers's approval.
4.3 All manufacturer's names and catalog numbers for valves and piping accessories are
given for descriptive purposes only. Equal or better items from other manufacturer
may be substituted with the Engineer's approval.
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 6 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
5.0 ATTACHMENTS
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 7 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
AG Aboveground
Amb Ambient
ANSI American National Standard Institute
ASME American Society of Mechanical Engineers
ASTM American Society for Testing and Materials
Atm Atmosphere
BB Bolted Bonnet
BC Bolted Cap
BE Beveled End
BF Butt Fusion
Brz Bronze
BW Butt Weld
C Degree Centigrade
CB Clamp Bonnet
CI Cast Iron
CO Chain-Operated
Conn Connection
Corr Corrugated
Cplg Coupling
CPVC Chlorinated Polyvinyl Chloride
CS Carbon Steel
Cu Copper
CWP Cold Working Pressure
DI Ductile Iron
DSAW Double Submerged Arc Welded
DWV Drain, Waste & Vent
Ecc Eccentric
EFW Electrical Fusion Welded
Ell Elbow
ENC Electroless Nickel Coated
ERW Electric Resistance Welded
F Degree Fahrenheit
F&D Faced and Drilled
Fed Std Federal Standard
FF Flat Face
Flg Flange
FM Factory Mutual
FPT Female Pipe Thread
FRP Fiberglass Reinforced Pipe Plastic
FS Forged Steel
Ga Gauge
Galv Galvanized
GE Grooved End
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 8 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
GO Gear Operated
Gr Grade
H&S Hub and Spigot
HDPE High Density Polyethylene
Hex Hexagonal
HP High Pressure
IBBM Iron Body Bronze Mounted
IBBTIron Body Bronze Trim
ID Inside Diameter
In Inches
Insul Insulation
ISRS Inside Screw Rising Stem
LF Linear Foot
LO Lever Operated
LP Low pressure
LR Long Radius
Lt Light
Lub Lubricated
Max Maximum
Mfr Manufacturer
MI Malleable Iron
Min Minimum
Mj Mechanical Joint
MP Medium Pressure
NPS Nominal Pipe Size
NPT National Pipe Taper (Pipe Thread)
NRS Non-Rising Stem
OP Operated
OS & Y Outside Screw and Yoke
PBE Plain Both Ends
PE Plain End
PIV Post Indicator Valve
PSI Pounds per Square Inch
PSIG Pounds per Square Inch Gauge
PVC Polyvinyl Chloride
RF Raised Face
RL Rubber Lined
SB Screwed Bonnet
SC Screwed Cap
Sch Schedule
Scrd Screwed
SDR Standard Dimensional Ratio
SE Screwed End
SJ Solder Joint
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 9 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
Smls Seamless
SO Slip-on
Sq Square
SS Stainless Steel
Std Standard
SW Socket Weld
TBE Threaded Both Ends
T&C Threaded and Coupled
Temp Temperature
Tfe Teflon
Thd Threaded
Thk Thick
Tr Trim
UB Union Bonnet
UG Underground
UL Underwriter's Laboratories
VG Victaulic Grooved
VC Victaulic Coupling
W/ With
WB Welded Bonnet
WFR Wafer
WN Welding Neck
WO Wrench-Operated
W/O Without
WOG Water, Oil and Gas
Wt Weight
Wtr Water
WWP Working Water Pressure
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 10 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
C2 1030 kPa @ 65 C 15
2 S2 825 kPa @ 80 C 32
2 H5 590 kPa @ 20 C 43
C2 1030 kPa @ 65 C 15
2 H5 590 kPa @ 20 C 43
2 H5 590 kPa @ 20 C 43
H5 590 kPa @ 20 C 43
H5 590 kPa @ 20 C 43
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 11 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
H5 590 kPa @ 20 C 43
P5 540 kPa @ 50 C 41
H5 590 kPa @ 20 C 43
H5 590 kPa @ 20 C 43
H5 590 kPa @ 20 C 43
P5 540 kPa @ 50 C 41
2 S2 825 kPa @ 80 C 32
H5 590 kPa @ 40 C 43
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 12 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
Nom.
Notes Size Description
(m.m.)
PIPE
THREADED FITTINGS
Class 150, threaded and banded, NPT, malleable iron, ASTM A-197, galvanized 2
(1,2) 15 - 80 - Cap.
- Coupling
- 45º elbow
- 90º elbow
- Tee
- Union
- Reduction coupling
- Reduction tee
- Plug, threaded, square head, carbon steel, ASTM A-105 2
FLANGES
15 - 80 - Threaded flange, Class 150, flat face, ANSI B16.5, ASTM A-105, 2
galvanized.
NIPPLES
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 13 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
15 - 80 - Pipe nipple, TBE, Sch.. 40, carbon steel, ASTM A-53 Gr. B,
galvanized.
- Swage nipple, concentric, TBE, Sch.. 40, carbon steel, ASTM A-234
WPB, galvanized.
VALVES
MISCELLANEOUS
80 - Y-strainer, class 125, flat face flanged, cast iron, 1/16" perforated
stainless steel screens.
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 14 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
Nom.
Notes Size Description
(m.m.)
PIPE
(4) 15 - 50 - Pipe seamless, coupled and threaded, NPT, Sch.. 40, carbon steel,
2
ASTM A-53 Gr. B.
(4) 15 - 50 - Pipe seamless, plain ends, Sch.. 40, carbon steel, ASTM A-53 2
Gr. B.
(4) 80 - Up - Pipe ERW, beveled end, std. wt. carbon steel, ASTM A-53 Gr. B.
(**) - Pipe Polyethylene High Density, PE 3408, type III Category 5, Class
C, grade P34, cell classification of PE 355434C, under ASTM
D3350, per ASTM D 1248 or approved equivalent DIN Standard.
PN 6 (Water pond to Elev. 2575 m. a.s.l.)
PN 10 (Elev. 2575 m. to 2535 m. a.s.l.)
PN 16 (Elev. 2535 m. a.s.l. and lower)
THREADED FITTINGS
2
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 15 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
15 - 50 - Cap
- Coupling
- 90º elbow
- 45º elbow
- Tee
- Reduction coupling
- Union
- Reduction tee
- Plug, threaded, carbon steel, ASTM A-105
SOCKET FITTINGS 2
15 - 50 - Cap
- Coupling
- 90º elbow
- 45º elbow
- Half coupling, SW
- Half coupling, female, threaded, NPT
- Reduction coupling
- Reduction tee
- Square head plug, threaded, NPT, carbon steel, ASTM A-105
- Tee
- Union
Butt weld, std. wt., carbon steel, ASTM A-234 Gr. WPB.
80 - Up - Cap
- 45º elbow
- 90º long radius elbow
- concentric reducer
- eccentric reducer
- Tee
O'LETS
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 16 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
FLANGES
Class 150, flat face, carbon steel, ASTM A-105, ANSI B16.5 2
15 - 50 - Threaded flange
NIPPLES
15 - 50 - Pipe nipple, TBE, Sch.. 40, carbon steel, ASTM A-53 Gr. B.
- Swage nipple, concentric, TBE, Sch.. 40, carbon steel, ASTM A-234
WPB.
VALVES
MISCELLANEOUS
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 17 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
80 -300 - Y-strainer, class 125, flat face, cast iron, 1/16" perforated stainless
steel screens.
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 18 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
Nom.
Notes Size Description
(m.m.)
PIPE
15 - 50 - Pipe seamless, threaded and banded Sch.. 40. Carbon steel, ASTM
A-53 Gr. B.
15 - 50 - Pipe seamless plain ends, Sch.. 40. Carbon steel, ASTM A-53 Gr. B. 2
(4) 80 - Up - Pipe ERW, beveled ends, std. wt. carbon steel, ASTM A-53 Gr. B.
(**) - Pipe Polyethylene High Density, PE 3408, type III Category 5, Class
C, grade P34, cell classification of PE 355434C, under ASTM
D3350, per ASTM D 1248 or approved equivalent DIN Standard.
PN 6 (Water pond to Elev. 2575 m. a.s.l.)
PN 10 (Elev. 2575 m. to 2535 m. a.s.l.)
PN 16 (Elev. 2535 m. a.s.l. and lower)
THREADED FITTINGS
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 19 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
15 - 50 - Cap
- Coupling
- 45º elbow
- 90º elbow
- Reduction coupling
- Tee
- Union
- Reduction tee
- Plug threaded, carbon steel, ASTM A-105
(§) Socket weld fitting, forged steel,, ASTM A-105, class 3000
15 - 50 - Cap
- Coupling
- 45º elbow
- 90º elbow
- Reduction coupling
- Reduction tee
- Square head plug, threaded, NPT, carbon steel, ASTM A-105
- Tee
- Union
Butt weld, std. wt., carbon steel, ASTM A-234, Gr. WPB
80 - Up - Cap
- 45º elbow
- 90º long radius elbow
- Concentric reducer
- Eccentric reducer
- Reducing tee
- Tee 2
O'LETS
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 20 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
FLANGES
Class 150, flat face, carbon steel, ASTM A-105, ANSI B16.5 2
NIPPLES
15 - 50 - Pipe nipple, TBE, Sch.. 40, carbon steel, ASTM A-53, Gr. B.
- Swage nipple, concentric, TBE, Sch.. 40, carbon steel, ASTM A-234
WPB.
VALVES
FIRE HYDRANT
100 Fire hydrant, class 150, 4" inlet, UL/FM approved with two 2 1/2" outlets.
INDICATOR POST
Indicator post to operate with non rising stem valves. UL/FM approved.
Nibco NIP1A or similar.
MISCELLANEOUS
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 21 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
80 - Up - Y-strainer, class 125, flat face, cast iron, ASTM A-126 Gr. B 1/16"
perforated stainless steel screen.
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 22 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
Nom.
Notes Size Description
(m.m.)
PIPE
15 - 80 - Pipe ERW, coupled and threaded, NPT, Sch. 40, carbon steel, ASTM 2
A-53 Gr. B, galvanized.
100 - 150 - Pipe ERW, beveled end, std. wt. carbon steel, ASTM A-53 Gr. B.
(**) - Pipe Polyethylene High Density, PE 3408, type III Category 5, Class
C, grade P34, cell classification of PE 355434C, under ASTM
D3350, per ASTM D 1248 or approved equivalent DIN Standard.
PN 6 (Water pond to Elev. 2575 m. a.s.l.)
PN 10 (Elev. 2575 m. to 2535 m. a.s.l.)
PN 16 (Elev. 2535 m. a.s.l. and lower)
TUBING
(7), (18) 10 - 50 - Tubing, seamless, copper hard drawn, ASTM B-88, type L.
THREADED FITTINGS
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 23 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
Class 150, threaded and banded, malleable iron, ASTM A-197, galvanized.
15 - 80 - Cap
- Coupling
- 45º elbow
- 90º elbow
- Tee
- Union
- Plug threaded, carbon steel, ASTM A-105, galvanized.
Butt weld, std. wt., carbon steel, ASTM A-234, Gr. WPB
O'LETS
FLANGES
Class 150, flat face, carbon steel, ASTM A-105, ANSI B16.5 2
NIPPLES
15 - 50 - Pipe nipple, TBE, Sch.. 40, carbon steel, ASTM A-53, Gr. B.,
Galvanized.
- Swage nipple, concentric, TBE, Sch.. 40, galvanized carbon steel,
ASTM A-234 WPB.
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 24 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
- Gasket, full face, class 125, 1/16", red rubber (Garlock SBR 22 or
similar).
VALVES
MISCELLANEOUS
80 - 150 - Y-strainer, class 125, flat face, cast iron, 1/16" perforated stainless
steel screen.
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 25 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
Nom.
Notes Size Description
(m.m.)
PIPE
15 - 50 - Pipe seamless, plain ends, Sch. 40, carbon steel, ASTM A-53 Gr. B. 2
65 - 300 - Pipe ERW, beveled end, std. wt. carbon steel, ASTM A-53 Gr. B.
15 - 50 - Cap
- Coupling
- 45º elbow
- 90º elbow
- Half coupling, SW
2
- Half coupling, threaded, female, NPT
- Plug, threaded, carbon steel.
- Reducing tee
- Union
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 26 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
Butt weld, std. wt., carbon steel, ASTM A-234 Gr. WPB
80 - 300 - Cap
- 45º elbow
- 90º long radius elbow
- Concentric reducer
- Eccentric reducer
- Tee
O'LETS
FLANGES
Class 150, flat face, carbon steel, ASTM A-105, ANSI B16.5 2
NIPPLES
15 - 50 - Pipe nipple, TBE, Sch.. 40, carbon steel, ASTM A-53, Gr. B.
- Swage nipple, concentric, PBE, Sch.. 40, carbon steel, ASTM A-234
WPB.
VALVES
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 27 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
80 - Up 125 326
MISCELLANEOUS
80 - 300 - Y-strainer, class 150, flat face, cast steel, 1/16" perforated stainless
steel screens.
15 - 300 - Insulation with fiber glass or mineral wool with 304 SS jacket.
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 28 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
Nom.
Notes Size Description
(m.m.)
PIPE
(9) 15 - 50 - Pipe, seamless, plain ends, Sch. 40S. Stainless Steel ASTM A-312
type 316 L.
(9) 65 - Up - Pipe, ERW, beveled ends, Sch. 5S. Stainless steel, ASTM A-778
Type 316 L.
Class 3000, socket weld, forged stainless steel, ASTM A-182, type 316 L.
65 - Up - Cap
- 45º elbow
- 90º long radius elbow
- Concentric reducer
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 29 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
- Eccentric reducer
- Tee
- Reducing tee
- Stub end
O'LETS
15 - 50 - Socket weld flanges, class 150, flat face, ASTM A-182, forged, type
316L, ANSI B16.5.
65 - 300 - Rolled stub ends, slip-on type, 316 L stainless steel (Alaskan SK-36-
PSO or equivalent)
350 - Up - Rolled stub ends, slip-on type, 316 L stainless steel (Alaskan SK-36-
SO or equivalent)
65 - 300 - Cast 304 SS backing flanges, drilled to ANSI B16.5, 150#. (Alaskan
SK-39-PSO or equivalent)
350 - 600 - Cast 304 SS backing flanges, drilled to ANSI B16.5, 150#. (Alaskan
SK-39-SO or equivalent)
700 - Up - Cast 304 SS backing flanges, drilled similar to ANSI B16.5, 150#.
(Alaskan SK-39-SO or equivalent)
65 - UP - Blind flange, ASTM A-105, forged, with 316 cover sheet, 0.5 mm of
thickness.
NIPPLES
(11) 15 - Up - Machine bolt, ASTM A-193 Gr. B8 with 1 ASTM A-194 Gr. 8 nut.
- Stud bolt. ASTM A-193 Gr. B8M with 2 ASTM A-194 Gr. 8M nuts.
- Gaskets, class 150, ring type, 1/8" teflon (Garlock 3500 or similar).
VALVES
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 30 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
15 - 50 514
80 - 150 425 a/b 324
200 - Up 426 a/b 323
MISCELLANEOUS
15 - 50 - Y-strainer, class 600, socket weld, 20 mesh 316 stainless steel body,
316 L stainless steel screen.
80 - 300 - Y-strainer, class 150, flat face, 40 mesh stainless steel body and
screen.
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 31 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
Nom.
Notes Size Description
(m.m.)
PIPE
15 - 50 - Pipe, seamless, Sch. 40S, plain end, Stainless Steel ASTM A-312
2
type 316 L, ANSI B36.19.
65 - 300 - Pipe, ERW, Sch. 10S beveled ends, stainless steel, ASTM A-778
Type 316 L, ANSI B36.19. 2
350 - 550 - Pipe, ERW, e= 0.218" beveled end, stainless steel, ASTM A-778
Type 316 L, external diameter according to ANSI B36.19. 2
600 - Up - Pipe, ERW, e= 0.25" beveled end, stainless steel, ASTM A-778
Type 316 L, external diameter according to ANSI B36.19. 2
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 32 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
Butt weld, ASTM A-774, type 316 L, Sch. 10s, ANSI B16.9 and ANSI B16.28 (short 2
radius elbow).
65 - 300 - Cap 2
- 45º elbow
- 90º elbow
- Concentric reducer
- Eccentric reducer
- Reducing tee
- Tee
Butt weld, ASTM A-774, type 316 L, Sch. 10s, ANSI B16.9 and ANSI B16.28 (short 2
radius elbow).
Butt weld, ASTM A-774, type 316 L, e= 0.218", ANSI B16.9 and ANSI B16.28 2
(short radius elbow).
Butt weld, ASTM A-774, type 316 L, e= 0.250", ANSI B16.9 and ANSI B16.28
2
(short radius elbow).
O'LETS
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 33 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
15 - 50 - Socket weld flanges, class 150, flat face, ASTM A-182, forged, type
316L, ANSI B16.5. 2
65 - 300 - Rolled stub ends, slip-on type, 316 L stainless steel (Alaskan SK-36-
PSO or equivalent)
350 - Up - Rolled stub ends, slip-on type, 316 L stainless steel (Alaskan SK-36-
SO or equivalent)
65 - 300 - Cast 304 SS backing flanges, drilled to ANSI B16.5, 150#. (Alaskan
SK-39-PSO or equivalent)
350 - Up - Cast 304 SS backing flanges, drilled to ANSI B16.5, 150#. (Alaskan
SK-39-SO or equivalent)
NIPPLES
15 - 50 - Swage nipple, concentric, plain both ends, Sch.. 40s, ASTM A-403,
type 316 L.
(11) 15 - Up - Machine bolt, ASTM A-193 Gr. B8 with 1 ASTM A-194 Gr. 8 nut.
(12) - Stud bolt. ASTM A-193 Gr. B8M with 2 ASTM A-194 Gr. 8M nuts.
- Gaskets, class 150, flat ring, 1/8" teflon (Garlock 3500 or similar)
VALVES
15 - 50 514, 515
80 - 150 425 a/b 324
200 - Up 426 a/b 323
MISCELLANEOUS
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 34 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
80 - 300 - Y-strainer, class 150, flat face, 40 mesh 316 stainless steel screen and
body.
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 35 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
Nom.
Notes Size Description
(m.m.)
PIPE
15 - 50 - Pipe, seamless, Sch. 40S, plain end, stainless steel ASTM A-312 type
2
304 L, ANSI B36.19
80 - 200 - Pipe, ERW, Sch. 10S beveled ends, stainless steel, ASTM A-312
Type 304 L, ANSI B36.19. 2
FITTINGS
Socket weld, class 3000, ASTM A-182, forged, type 304 L, ANSI B16.11. 2
15 - 50 - Cap
- Coupling
- 45º elbow
- 90º elbow
- Tee
- Union
- Reducing tee
- Concentric reducer
- Hose connection
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 36 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
Butt weld, ASTM A-774, type 304 L. Sch. 10s, ANSI B16.9 and ANSI B16.28 (short 2
radius elbow).
65 - 200 - Cap
- 45º elbow
- 90º long radius elbow
- Concentric reducer
- Eccentric reducer
- Tee
- Reducing tee
- Stub end
O'LETS
15 - 50 - Socket weld flanges, class 150, flat face, ASTM A-182, forged, type
304 L, ANSI B16.5 2
65 - 200 - Rolled stub ends, slip-on type, 304 L stainless steel (Alaskan SK-36-
PSO or equivalent)
65 - 200 - Cast 304 SS backing flanges, drilled to ANSI B16.5, 150 # (Alaskan
SK-39-PSO or equivalent)
NIPPLES
15 - 50 - Swage nipple, concentric, plain both ends, Sch.. 40s, ASTM A-403,
type 304 L.
(11) 15 - Up - Machine bolt, ASTM A-193 Gr. B8 with 1 ASTM A-194 Gr. 8 nut.
(12) - Stud bolt. ASTM A-193 Gr. B8 with 2 ASTM A-194 Gr. 8 nuts.
- Gaskets, class 150, flat ring, 1/8" teflon (Garlock 3500 or similar)
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 37 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
VALVES
MISCELLANEOUS
80 - 200 - Y-strainer, class 150, flat face, 40 mesh 316 stainless steel screen and
body.
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 38 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
Nom.
Notes Size Description
(m.m.)
PIPE
15 - 50 - Pipe, seamless, Sch. 40S, plain ends, stainless steel ASTM A-312
type 316 L.
80 - 300 - Pipe, ERW, Sch. 10S beveled ends, stainless steel, ASTM A-778
Type 316 L.
65 - 300 - Cap
- 45º elbow
- 90º long radius elbow
- Concentric reducer
- Eccentric reducer
- Reducing tee
- Tee
O'LETS
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 39 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
FLANGES 2
15 - 50 - Socket weld flange, flat face, class 150, ASTM A-182, forged, type
316 L, ANSI B16.5
UNION VICTAULIC
25 - 200 - Victaulic Style 70 Snap Joint Quick disconnect coupling, with type o
seal.
NIPPLES
15 - 50 - Swage nipple, concentric, plain both ends, Sch.. 40s, ASTM A-403,
type 316 L.
(11) 15 - 300 - Machine bolt, ASTM A-193 Gr. B8 with 2 ASTM A-194 Gr. 8 nut.
- Stud bolt. ASTM A-193 Gr. B8M with 2 ASTM A-194 Gr. 8M nuts.
- Gasket, class 150, flat ring, 1/8" teflon (Garlock 3500 or similar)
VALVES
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 40 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
Nom.
Notes Size Description
(m.m.)
PIPE
(*) 15 - 400 - Pipe, PVC per ASTM D1784 and 1785, type 1 Grade 1 (Cell
2
classification 12454-B) Sch 80, plain ends.
(*) 15 - 450 - Pipe CPVC per ASTM D 1784, type 4 grade 1 (cell classification
23447-B and ASTM F 441), Sch 80. 2
(*) PVC, Sch.. 80, ASTM D-1784 (material)/ ASTM D-2467 (dimensions)/ ASTM D- 2
2855 (cementing)
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 41 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
(11) 15 - 400 - Machine bolts, ASTM A-193 Gr. B8 with 2 ASTM A-194 Gr. 8 nuts.
- Stud bolt, ASTM A-193, Gr. B8M, with 2 ASTM A-194 Gr. 8M
nuts.
- Gaskets, class 150, flat face, 1/8" teflon (Garlock 3500 or similar)
VALVES
15 - 50 516
80 - 200 423 324
250 - 400 423
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 42 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
Nom.
Notes Size Description
(m.m.)
PIPING
20 to 50 PN 10 plain end
63 to Up PN 6 plain end for Class H56
63 to Up PN 10 plain end for class H510
400 to Up PN 4 plain end for class H54
FITTING
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 43 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
ELBOW’S DEGREES
30 ° 45 ° 60 ° 90 °
N.A.S. 2 3 3 5
STUB - END
All - Molded Butt-fusion flanged adapter (stub end) complete for class
150 drilled back-up flange.
FLANGES
50 - 300 - Cast 304 SS, backing flanges, drilled to ANSI B16.5, 150# (Alaskan
SK-39-PSO or equivalent)
350 - Up - Cast 304 SS, backing flanges, drilled to ANSI B16.5, 150# (Alaskan
SK-39-SO or equivalent)
(11) All - Machine bolts, ASTM A-193 Gr. B8, hex head, with ASTM A-194
Gr. 8 nut or stud bolts, ASTM A-193 Gr. B8M, with 2 ASTM A-194
Gr. 8M nuts.
All - Gaskets, class 150, flat face, 1/8" teflon (Garlock 3500 or similar)
VALVES
MISCELLANEOUS
15 - 50 - Y-strainer, class 600, socket weld, All 316 L stainless steel 20 mesh
stainless steel screen.
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 44 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
80 - Up - Y-strainer, class 150, flat face, All 316 L stainless steel 40 mesh
stainless steel screen.
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 45 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
Nom.
Notes Size Description
(m.m.)
PIPE
(15) 15 - 50 - Pipe, seamless, plain end, Sch.. 80, carbon steel, ASTM A-53 Gr. B
80 - 200 - Pipe, seamless, beveled end, Sch..80, carbon steel, ASTM A-53
Gr. B
15 - 50 - Cap
- Coupling
- 45º elbow
- 90º elbow
- Tee
- Reducing tee
15 - 200 - Cap 2
- 45º elbow
- 90º elbow
- Concentric reducer
- Eccentric reducer
- Reducing tee 2
- Tee
O'LETS
FLANGES
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 46 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
15 - 50 - Socket weld flange, class 150, ANSI B16.5, raised face carbon steel, 2
ASTM A-105.
25 - 200 - Slip-on flange, class 150, ANSI B16.5, raised face, carbon steel, 2
ASTM A-181.
NIPPLES
15 - 50 - Swage nipple, concentric, P.B.E., Sch. 80, ASTM A-234 Gr. WPB.
15 - 200 - Machine bolt, ASTM A-193 Gr. B8, with ASTM A-194 Gr. 8 nut.
- Gaskets, class 150, flat ring, 1/8" teflon (Garlock 3500 or similar)
VALVES
SPRAY PROTECTION
All flanges connections, valve bodies and in line instruments shall be covered against
spray with protection shield, as manufactured by "RAMCO" or equivalent.
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 47 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
Nom.
Notes Size Description
(m.m.)
PIPE
15 - 50 - Pipe, seamless, plain end, Sch.. 40, carbon steel ASTM A53 GR B
80 - 200 - Pipe ERW, beveled end, std. wt., carbon steel ASTM A53 GR B
15 - 50 - Cap
- Coupling
- 45º elbow
- 90º elbow
- Reducing tee
- Tee
- Union
Butt weld. std. wt, carbon steel, ASTM A-234 Gr. WPB
80 - 150 - Cap
- Concentric reducer
- Eccentric reducer
- 45º elbow
- 90º elbow
- Tee
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 48 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
O'LETS
FLANGES
ANSI B16.5 class 150, flat face, carbon steel, ASTM A-105
NIPPLES
15 - 50 - Pipe nipple, P.B.E., Sch. 40, carbon steel ASTM A-53, Gr. B
- Swage nipple, concentric, PBE, Sch. 40, carbon steel ASTM A-53
Gr.B
VALVES
NOTES
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 49 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
(2) Use a 20 mm screwed branch connection with ball valve for all pressure points.
(3) Weld neck flanges shall only be used at fittings, butterfly valves, and dual door check
valves.
(4) For underground service, all carbon steel piping shall be coated and wrapped. See note 8.
(8) Fittings, joints and coating damage shall be single wrapped 15 mm (minimum overlap) in
the field with yellow polyethylene corrosion protection tape Polyken N 900 or equal.
Wrapped surface shall be primed with Polyken N 927 pipeline Primer.
(9) All steel embeds shall be stainless steel 316 L Sch. 40 pipe and fittings.
(13) Use hexagonal head machine bolt for lug type butterfly valve.
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 50 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
HEADER
SIZE
(mm)
15 TT
20 TV TT
25 TV TV TT
40 TV TV TV TT
50 TV TV TV TV TT
80 TV TV TV TV TV TT
100 LT LT LT LT LT LT WT
150 LT LT LT LT LT LT NR WT
200 LT LT LT LT LT LT NR NR WT
250 LT LT LT LT LT LT NR NR NR WT
300 LT LT LT LT LT LT NR NR NR NR WT
TT = THREADED TEE
TV = THREADED REDUCING TEE
LT = THREADOLET
WT = BUTT WELD TEE
NR = NONREINFORCED BRANCH CONNECTION WITH 10 mm FILLET WELD
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 51 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
HEADER
SIZE
(mm)
15 TT
20 TV TT
25 TV TV TT
40 TV TV TV TT
50 TV TV TV TV TT
80 LT LT LT LT LT WT
100 LT LT LT LT LT NR WT
150 LT LT LT LT LT NR NR WT
200 LT LT LT LT LT NR NR NR WT
250 LT LT LT LT LT NR NR NR NR WT
300 LT LT LT LT LT NR NR NR NR NR WT
350 LT LT LT LT LT NR NR NR NR NR NR WT
400 LT LT LT LT LT NR NR NR NR NR NR NR WT
450 LT LT LT LT LT NR NR NR NR NR NR NR NR WT
500 LT LT LT LT LT NR NR NR NR NR NR NR NR NR WT
600 LT LT LT LT LT NR NR NR NR NR NR NR NR NR NR WT
15 20 25 40 50 80 100 150 200 250 300 350 400 450 500 600
BRANCH SIZE (mm)
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 52 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
HEADER
SIZE
(mm)
15 ST
20 SV ST
25 SV SV ST
40 SV SV SV ST
50 SV SV SV SV ST
80 LS LS LS LS LS WT
100 LS LS LS LS LS WV WT
150 LS LS LS LS LS WV WV WT
200 LS LS LS LS LS WV WV WV WT
250 LS LS LS LS LS WV WV WV WV WT
300 LS LS LS LS LS WV WV WV WV WV WT
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 53 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
HEADER
SIZE
(mm)
15 ST
20 SV ST
25 SV SV ST
40 SV SV SV ST
50 SV SV SV SV ST
80 - - - SV SV ST
100 - - - SV SV SV ST
150 - - - TRC TRC TRC SV ST
200 - - - - - - TRC SV ST
APPLICABLE CLASS P5
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 54 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
HEADER
SIZE
(mm)
16 PT
20 - PT
25 - PRT PT
32 - - PRT PT
50 - - PRT PRT FT
63 - - - PRT PRT FT
75 - - - PRT PRT PRT FT
90 - - - - - PRT FT FT
110 - - - - - - FT FT FT
180 - - - - - - FT FT FT FT
200 - - - - - - FT FT FT FT FT
250 - - - - - - - - FT FT FT FT
300 - - - - - - - - FT FT FT FT FT
350 - - - - - - - - - - FT FT FT FT
Note: Use butt weld fabricated tee with concentric reduction for reduction branches
APPLICABLE CLASS H5
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 55 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
A. (GATE VALVES)
111 15 50 Class 125, threaded, bronze body ASTM B-62, inside screw, rising
stem, screw bonnet, bronze trim.
CRANE Nº 428 or similar.
112 15 50 Class 175, threaded, bronze body, ASTM B62, screwed bonnet
UL/FM approved.
CRANE 459 or similar.
113 15 50 Gate valve, class 800, socket weld, forged or cast steel, O.S.&Y.,
full port, 12 CR trim, stellite faced seat, bolted bonnet.
SMITH 800 or equivalent.
121 80 300 Class 125, flat face flanged, cast iron body, outside screw and
yoke, bolted bonnet, bronze trim.
CRANE Nº 465½ or similar.
122 80 UP Class 175, flat face, cast iron body, O.S.&Y, bolted bonnet, solid
wedge disc, bronze trim. UL/FM approved.
STOCKHAM G-634 or similar.
123 15 200 Class 150, raised face flanged, all Alloy 20, solid wedge disc.
outside screw and yoke, bolted bonnet.
STOCKHAM 1S-ORF-20 or similar
124 80 UP Class 175 Flat Face, cast iron body O.S. & Y, bolted bonnet,
Indicator Post Pattern, non rising stem, solid wedge. UL/FM
approved. NIBCO F-609 or similar.
125 80 UP Gate Valve Class 150, Cast steel body, flanged ends, O.S.&Y.,
13% Cr trim, wedge type disc.
CRANE 47XU or similar.
B. (GLOBE VALVES)
211 15 50 Class 125, threaded, bronze body ASTM B-62, bronze disc, inside
screw rising stem, screwed bonnet.
CRANE 1 or similar.
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 56 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
212 15 20 Class 150, socket weld, teflon disc, 316 stainless steel, O.S.&Y.
construction.
213 15 50 Globe valve, class 800, socket weld, forged or cast carbon steel
O.S.&Y., bolted bonnet, plug type disc, stainless steel trim.
SMITH G80 or similar.
214 40 65 Globe-angle, class 300 threaded, bronze body ASTM B62, Rising
stem, renewable disc screw-in bonnet, UL/FM approved.
NIBCO T-331.
221 80 200 Class 125, flat face flanged, cast iron body, outside screw and
yoke, rising stem, bolted bonnet bronze trim.
CRANE N° 351 or similar.
222 80 UP Class 150, raised face, teflon disc, 316 SS construction, bolted
bonnet, outside screw and yoke handwheel operated.
223 15 50 Class 150, raised face flanged, all Alloy 20 construction, 0.S & Y.,
bolted bonnet.
POWELL Fig. 2475 or similar.
224 80 150 Globe valve, class 150, flanged, cast steel O.S.& Y., bolted bonnet,
12 Cr trim, plug type disc, nickel alloy seat. NIBCO M-609 or
similar.
230 50 Single angle seat valve 2" x 2", polyethylene body, Viton "0" Ring
and washers, inlet and outlet threaded.
PLASSON 7030 or similar.
C. (CHECK VALVES)
311 15 50 Class 150, threaded, bronze body ASTM B-62, swing check type,
screwed cap.
CRANE N° 37 or similar.
312 15 50 Class 200, socket weld, bolted cap, all 316 stainless steel.
313 15 50 Lift check valve, class 800, socket weld, cast or forged carbon
steel, bolted cap, stellite seat.
SMITH G80 or similar.
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 57 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
321 80 300 Class 125, wafer type, duo-check, cast iron body, Buna-N seat.
316 SS spring.
MISSION DUO CHECK II Fig G12 HMP.
322 100 300 Class 175, swing Type, Iron body ASTM A 126, Cast Iron Bonnet,
UL/FM approved.
NIBCO F-908-W or similar.
323 200 UP Class 150, Wafer type, duo check type, teflon seat, all 316 (CF-
8M) stainless steel body and disc.
MARLIN A-150-SS-KWK or similar.
324 80 200 Class 150, flanged end, bolted cap, swing check type, 316 (CF-
8M) stainless steel body and cap.
STOCKHAM 15-SBF-316-T or similar
325 25 100 Class 150, raised face, swing check type, body and disc Alloy 20,
bolted cap.
ALLOYCO 377 or similar.
326 80 150 Swing check valve, class 150, flanged, cast steel, bolted cap, 13%
Cr trim.
CRANE 147XU or similar.
D. (BUTTERFLY VALVES)
421a 80 150 Class 150, eccentric, wafer type, carbon steel body and disc, TFE
bearings, reinforced TFE seats and seals, lever operated.
McCANNA L150-CS-R-CS or similar.
421b 80 150 Class 150, eccentric lug type carbon steel body and disc, TFE
bearings, reinforced TFE seats and seals, lever operated.
McCANNA L151-CS-R-CS or similar.
422a 200 600 Class 150, eccentric wafer type, carbon steel body and disc, TFE
bearings, reinforced TFE seats and seals, gear operated.
McCANNA L150-CS-R-CS or similar.
422b 200 600 Class 150, eccentric lug type, carbon steel body and disc, TFE
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 58 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
423 80 UP Class 150, wafer type, Polypropylene body disc and shaft, teflon
seat, lever operated (and gear operated for 200 and up). GEORGE
FISHER 367 or similar.
425a 80 150 Class 150, eccentric, wafer type, CF-8M stainless steel body and
disc, 317 SS Shaft, TFE bearings, reinforced TFE seats lever
operated.
McCANNA L150-S6-T-S6 or similar.
425b 80 150 Class 150, eccentric, lug type CF-8M stainless steel body and disc,
317 SS shaft, TFE bearings, reinforced TFE seats lever operated.
McCANNA L151-S6-T-S6 or similar.
426a 200 UP Class 150, eccentric wafer type CF-8M stainless steel body and
disc, 317 SS shaft, TFE bearings, reinforced TFE seats gear
operated.
McCANNA L150-S6-T-S6 or similar.
426b 200 UP Class 150, eccentric lug type 316 (CF-8M) stainless steel body and
disc, 317 SS shaft, TFE bearings, reinforced TFE seats, gear ope-
rated.
McCANNA L151-S6-T-S6 or similar.
E. (BALL VALVES)
513 15 50 Class 2000 WOG, one piece carbon steel bar stock body, threaded
ends, CS stem and ball, Teflon seat, lever operated.
VELAN Fig. S-B0202-SSG or similar.
514 15 50 Class 1500, double union, socket weld end, 316 stainless steel
body and ball, teflon seals, lever operated.
APOLLO 76-400 or similar.
515 15 50 Class 2000 WOG, one piece 316 stainless steel bar stock body,
stem and ball, threaded ends, Teflon seats lever operated.
VELAN Fig. S-B0213-SSG or similar.
516 15 50 Class 150, union ends, one socket union end and one union end 2
threaded, CPVC body and ball, double union, viton o'rings, Teflon
seats.
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 59 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
517 25 50 Class 150, threaded, Polypropylene body and ball, lever operated.
GEORGE FISHER 346 or similar.
518 15 50 Class 2000, alloy 20 body and ball, teflon seals, double union, SW
ends, lever operated.
521 80 UP Class 1500, raised face, all 316 stainless steel, teflon seal, lever
operated.
522 80 200 Class 150, alloy 20 body and ball, teflon seals, double union end
flanged end lever operated.
F. (DIAPHRAGM VALVES)
621 15 100 Class 150, flat face, all polypropylene, teflon diaphragm,
handwheel operated.
622 20 200 Class 125, flanged cast iron body, PVDF lined, viton diaphragm,
handwheel operation.
SAUNDERS 56-04-11-KV or similar.
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 60 of 61
Project Nº C-370
Technical Specification Nº CMCC - GP - 401
Piping Material
p:\c370\pip\docs\tecspec\gp401\gp401.doc Page 61 of 61