Professional Documents
Culture Documents
Online Help
Issue 04
Date 2010-01-10
Website: http://www.huawei.com
Email: terminal@huawei.com
Basic Requirements
z During storage, transportation, and operation of the device, keep it dry and prevent
it from colliding with other objects.
z Do not dismantle the device. In case of any fault, contact an authorized service
center for assistance or repair.
z Without authorization, no organization or individual can change the mechanical,
safety, or performance design of the device.
z When using the device, observe all applicable laws and regulations and respect the
legal rights of other people.
Accessory Requirements
z Use only the accessories supplied or authorized by the device manufacturer.
Otherwise, the performance of the device may get affected, the warranty for the
device or the laws and regulations related to telecommunications terminals may
become null and void, or an injury may occur.
z Do not use the power adapter if its cable is damaged. Otherwise, electric shocks or
fires may occur.
z Ensure that the power adapter meets the specifications indicated on the device
nameplate.
z Ensure that the power adapter meets the requirements of Clause 2.5 in
IEC60950-1/EN60950-1 and it is tested and approved according to national or local
standards.
Safety of Children
Keep the device and its accessories out of the reach of children. Otherwise, they may
damage the device and its accessories by mistake, or they may swallow the small
components of the device, causing suffocation or other dangerous situations.
Maintenance
z If the device is not used for a long time, power it off, and then remove all the cables
connected to it.
z If any exception occurs, for example, if the device emits any smoke or unusual
sound or smell, stop using the device immediately, power it off, remove all the
cables connected to it, and then contact an authorized service center.
z Do not trample, pull, or overbend any cable. Otherwise, the cable may get damaged,
causing malfunction of the device.
z Before cleaning the device, stop using it, power it off, and then remove all the
cables connected to it.
z Use a clean, soft, and dry cloth to clean the device shell. Do not use any cleaning
agent or spray to clean the device shell.
EU Regulatory Conformance
z This device should be installed and operated with a minimum distance of 20 cm
between the antenna and all persons.
z Български: С настоящето Huawei Technologies Co., Ltd. декларира, че този
уред съответства на основните изисквания и другите разпоредби на
Директива 1999/5/EC.
z Česky: Huawei Technologies Co., Ltd., tímto prohlašuje, že toto zařízení je ve
shodě se základními požadavky a dalšími souvisejícími opatřeními směrnice
1999/5/EC.
z Dansk: Huawei Technologies Co., Ltd. erklærer hermed at denne enhed er i
overensstemmelse med de obligatoriske krav og andre relevante bestemmelser i
direktiv 1999/5/EF.
z Nederlands: Hierbij verklaart Huawei Technologies Co., Ltd. dat dit apparaat in
overeenstemming is met de essentiële eisen en de andere relevante bepalingen van
richtlijn 1999/5/EC.
z English: Hereby, Huawei Technologies Co., Ltd. declares that this device is in
compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
z Eesti: Käesolevaga kinnitab Huawei Technologies Co., Ltd., et see seade vastab
Direktiivi 1999/5/EÜ põhinõudmistele ja teistele asjakohastele määrustele.
z Notice: Observe the national local regulations in the location where the device is to
be used. This device may be restricted for use in some or all countries of European
Union.
Contents
The supported functions are subject to your product purchased. The online help is only
for reference.
1.1 Functions
The WiMAX Customer-Premises Equipment (CPE) (hereinafter referred to as the CPE)
is a next-generation gateway used in a Worldwide Interoperability for Microwave
Access (WiMAX) network. The CPE provides you a new service experience. With the
CPE, you can enjoy wireless broadband services. With the CPE, home and enterprise
users can easily set up a wireless network and enjoy the services over the network.
Enhanced Throughput
z Supporting the downlink bandwidth of up to 15 Mbit/s and the uplink bandwidth of
up to 5 Mbit/s
z Supporting multiple-input multiple-output (MIMO)
z Supporting Orthogonal Frequency-Division Multiple Access (OFDMA), which
increases spectrum utilization
Various Services
z Providing a Web-based utility with a user-friendly graphical user interface (GUI)
and abundant help information
z Supporting both local and remote upgrade of the CPE
z By default, the IP address of the CPE is 192.168.1.1 and the subnet mask is 255.255.255.0.
z If the CPE is working as a routing device, it is recommended that the IP address and DNS
settings be obtained automatically.
Step 2 Start the Internet Explorer, enter http://192.168.1.1 in the address bar, and then press
Enter.
Step 3 Enter the user name and the password in the login window that is displayed, and then
click Login.
Step 1 In the navigation tree, choose Basic > WAN, and then click the WAN tab.
Step 2 Select Route from Mode.
Step 3 Select DHCP Auto get IP address from ISP.
Step 4 Select a network address translation (NAT) type.
The NAT function is enabled to facilitate the translation of IP addresses. Through NAT, the
host IP address of a LAN can be effectively hidden. Thus, the security of the intranet is
ensured. Two NAT types are available:
z Network Address Port Translation (NAPT)
z Cone NAT
Step 5 Click Apply.
----End
The NAT function is enabled to facilitate the translation of IP addresses. Through NAT, the
host IP address of a LAN can be effectively hidden. Thus, the security of the intranet is
ensured. Two NAT types are available:
z Network Address Port Translation (NAPT)
z Cone NAT
Step 5 Enter the IP address in the IP Address text box.
Step 6 Enter the subnet mask in the Subnet Mask text box.
Step 7 Enter the default gateway in the Default Gateway text box.
Step 8 Enter the IP address of the primary domain name server (DNS) in the Primary DNS
Server text box.
Step 9 Enter the IP address of the secondary DNS in the Secondary DNS Server text box.
IP Address, Subnet Mask, Default Gateway, Primary DNS Server, Secondary DNS
Server are provided by the carrier.
Step 10 Click Apply.
----End
The NAT function is enabled to facilitate the translation of IP addresses. Through NAT, the
host IP address of a LAN can be effectively hidden. Thus, the security of the intranet is
ensured. Two NAT types are available:
z Network Address Port Translation (NAPT)
z Cone NAT
Step 5 Enter the user name and password in the text box.
Step 6 Select the dial method.
Two dial-up methods are available: Auto Dial and Manual Dial. If selecting Manual Dial,
you need to click Manual Dial set up a dial-up connection.
Step 7 Click Apply.
----End
If the CPE is working as a bridging device, you need to perform only Step 1 to Step 4 when
configuring a LAN.
----End
The BM622, BM632 and the BM652 have the VoIP function.
As a voice service based on SIP, VoIP enables users to make Internet phone calls and fax
data.
As an application layer protocol, SIP is used for setting up, changing, or completing a
multimedia session.
z Select the SIP ID to be changed, change it, and then click Apply.
z Select Remove to delete the selected SIP ID. After a SIP ID is removed, if you want to use
the SIP ID, you need to create it again.
z If the SIP server is the secondary server, you do not need to configure the parameters of the
proxy server.
----End
Modify the attributes of the selected speed dial number and then click Apply.
Select Remove to delete the selected speed dial number. After it is removed, if you want
to speed dial the number, you need to designate the number to speed dial first.
When you select Application, the system displays the values of all parameters. You can
keep the default values or change them.
When you select Application, the system displays values of all parameters. You can
keep the default values or change them.
If Primary SNTP Server and Secondary SNTP Server drop-down list boxes do not contain
the required options, enter the server names in the text boxes.
z Medium: indicates that besides preventing port scanning and IP address spoofing,
the firewall prevents ICMP redirection packets.
z High: indicates that besides preventing port scanning, IP address spoofing, and
ICMP redirection packets, the firewall prevents the Synchronous Idle (SYN)
character flood attack and the ping operation on the WAN side.
z PKMv2_EAP
To any damage to the CPE, do not power off the CPE when it is being upgraded.
The software of the CPE can be upgraded locally or remotely. It takes about a few
minutes to upgrade the software. Upgrade the software according to the on-screen
instructions.
To upgrade the software of the CPE, you need to upload the local upgrade files to the
CPE. To upgrade the CPE locally, do as follows:
Step 1 In the navigation tree, choose Maintain > Device, and then click Firmware.
Step 2 Click Browse, and select an upgrade file.
Step 3 Click Upgrade Software.
----End
After default settings are restored, the configuration file is restored to the default one.
Therefore, restore the default settings with caution.
Step 1 In the navigation tree, choose Maintain > Device, and then click the Reset tab.
Step 2 Click Restore Default Configuration to restore the default settings.
You need to log in to the Web-based utility after restoration.
----End
The BM622, BM632 and the BM652 have the VoIP function.
The VoIP information includes the SIP ID, register status of the SIP ID, and port number.
To check the VoIP information, choose Status > VoIP in the navigation tree, and then
click the VoIP Info tab.
5 Troubleshooting
6 Abbreviations
ACL Access Control List
ALG Application Layer Gateway
CWMP CPE WAN Management Protocol
DHCP Dynamic Host Configuration Protocol
DMZ Demilitarized Zone
DNS Domain Name Server
EAP Extensible Authentication Protocol
FE Fast Ethernet
HTTP Hypertext Transfer Protocol
ICMP Internet Control Message Protocol
IPSec IP Security Protocol
ISP Internet Service Provider
L2TP Layer 2 Tunneling Protocol
LAN Local Area Network
MAC Medium Access Control
MIMO Multiple-Input Multiple-Output
NAI Network Access Identifier
NAPT Network Address Port Translation
NAT Network Address Transmission
OFDMA Orthogonal Frequency Division Multiple Access
PKM Privacy Key Management
PPPoE Point-to-Point Protocol over Ethernet
PPTP Point-to-Point Tunneling Protocol
RTSP Real-Time Streaming Protocol
SIP Session Initiation Protocol
SNTP Simple Network Time Protocol
SSH Secure Shell
SYN Synchronous