Professional Documents
Culture Documents
OGIE 2009
CE Board November 2002
OGIE 2009
OGIE 2009
Example: The cord in the figure is wrapped around a frictionless
pulley and supports a 100 kg (981 N) mass.
OGIE 2009
OGIE 2009
4. Assuming tipping impends,
The winch in the figure is used to what is the normal floor reaction
move the 300-lb uniform log AB. in #?
Coefficient of friction between 5. Assuming tipping impends,
log and floor is 0.4. what is the max frictional floor
reaction in #?
1. Assuming sliding impends, 6. What is the maximum tensile
what is the normal floor reaction force that can be applied to cause
in #? tipping, in #?
300#
T
OGIE 2009
FBD when tipping impends
300#
T
OGIE 2009
The center of mass of the vertical 800 kg panel is at G. The
panel is mounted on wheels which permit ease of horizontal
movement along the fixed rail. If the bearing at A becomes
“frozen” so that the wheel cannot turn, compute the force P
required to slide the panel. The coefficient of friction between
the wheel and the rail is 0.30.
OGIE 2009
NA NB
FA = 0.3NA O
800 kg = 7848N
OGIE 2009
CE BOARD MAY 2006
The uniform 50 kg plank is resting on rough surfaces at A
and B whose coeff. of static friction are as shown. A 100
kg horse starts running towards B.
a. What is the reaction at B?
b. What is the reaction at A?
c. What is the value of x when the plank will start to slide?
OGIE 2009
ΦB = arctan(0.5) = 26.60
ΦA = arctan(0.2) =11.30
100kg 50kg RA
Force Polygon
11.30
155.30
FA 2m
50kg
NA FB RB
NB
RB
RA
OGIE 2009
A 200-lb block is in contact with a plane inclined at 300 to the
horizon. A force P, parallel to and acting up the plane, is applied
to the body. If the coefficient of static friction is 0.20, (a) find
the value of P to just cause motion to impend up the plane, and
(b) find P to just prevent motion down the plane. (c) If P = 80 lb
determine the magnitude and direction of the friction force.
OGIE 2009
T2
Belt Friction
T1
OGIE 2009
A counterclockwise moment M=1500 in·# is applied
to the flywheel. If the coefficient of friction between
the band and the pulley is 0.20, compute the
minimum force P to prevent the wheel from rotating
OGIE 2009
To stop the wheel from rotating
counterclockwise, T2 must effect a
clockwise rotation, therefore it
must be greater than T1.
T1 T2
OGIE 2009