Professional Documents
Culture Documents
The aim of any sound reinforcement system is The TA-890H is a portable mid-high enclosure
to distribute sound evenly, with consistent designed for flown and ground stacked touring
frequency response and in a predictable way, applications. It houses high frequency, high-mid
across all seats of an auditorium or listening frequency and low-mid frequency elements
area. An optimum method of attaining this goal arranged in a vertical orientation, and covering
is through the correct application of point the frequency range from 100Hz to 20kHz.
source arrays to create a segment of a spherical
The top section of the enclosure is dedicated to
wavefront. Not only does this approach provide
handling the high frequency band above 5kHz,
an exceptionally well defined and coherent
being reproduced by two custom-designed HF
acoustic source, but it also allows for
drivers loaded by a high frequency Polyhorn™
considerable flexibility when assembling arrays
device. The HF driver combines highly
in both horizontal and vertical dimensions.
innovative patented design features to ensure
In practice, the dispersion characteristics of a exceptional high frequency performance and
typical sound system are less than ideal because long term reliability. High-mid frequencies from
of the tendency for conventional high frequency 450Hz to 5kHz are handled by a proprietary 10” FEATURES
exponential horns to ‘beam’ with increasing HMF drive unit on a further Polyhorn™ device Total system optimisation
frequency. When arraying such horns, optimised for high-mid frequencies. Two 10”
Very high SPL
interference between adjacent sources is inevitable low-mid frequency drivers loaded with
Arrayable enclosure
due to the variable curvature of the wavefront TurboMid™ devices cover the remaining
caused by the horn's geometry, and this results frequency range from 450Hz down to 100Hz. Integral flyware
in undesirable comb filtering effects. Rotatable mid-high section
A key feature of the Polyhorn™ designs is the
Turbosound engineers, through intensive very sharp cut-off at the edges of the coverage Optimised truck pack
research and the subsequent implementation of pattern, which all but eliminates the comb
Very compact enclosures
innovative and patented Polyhorn™ designs, filtering effects commonly experienced between
have identified and overcome these deficiencies adjacent sources when arraying conventional Seamless arrayability
and implemented solutions in the Turbosound horn designs. This makes it possible to achieve
Aspect series. Fundamental to the Polyhorn™ seamless arrayability in a very intuitive and
APPLICATIONS
designs—and applied in both high-mid and high predictable fashion.
Stadia and arenas
frequency bands—is the principle of dividing an
Significant improvements in the individual
exponential horn flare into a multiplicity of Touring and festivals
drivers' power handling, and a subsequent
tapered waveguides. Doing so ensures that all Regional concert touring
reduction in power compression, have also
path lengths from the diaphragm surface to
been achieved through the use of high stability, Theatre and Corporate
horn mouth are identical, and consequently
high temperature neodymium magnet
Dance clubs
datasheet
TA-890H ASPECT SERIES ENGINEERING INFORMATION
integral flying systems for both horizontal and vertical offers much higher efficiency, as well as reduced weight
configurations. The mid-high section is square and • Directivity over 1kHz exhibits very sharp cut-off at the
pattern edges, dramatically reducing out-of-band signal
symmetrical, and it can be removed and rotated through 90°
• Unique 10" high-mid frequency driver is fabricated from a
to allow boxes to be flown in either orientation while
single-piece spun aluminium bowl, serving as a high strength
maintaining the required coverage pattern. This means that
frame, heatsink, rear compression chamber and high pass
only one type of mid-high enclosure is needed form part of a
filter
large rental inventory flexible enough to meet widely varying
• Low-mid enclosure employs rear-facing drivers with
venue requirements. combined heatsink/phase plug assemblies
The cabinet dimensions have been carefully chosen to allow • Revolutionary composite cone materials are used in all cone
page 2
datasheet
ASPECT SERIES ENGINEERING INFORMATION TA-890H
page 3
datasheet
TA-890H ASPECT SERIES ENGINEERING INFORMATION
COMPONENTS 2 x 10” (254mm) LMF drivers, 1 x 10” (254mm) HMF driver on a midrange Polyhorn™
2 x HF drivers on a high frequency Polyhorn™
CONSTRUCTION 15mm (5/8”) beech plywood throughout; rebated, screwed and glued. Finished in black semi-
matt textured paint. Four recessed carrying handles
CONNECTORS 2 x Neutrik Speakon NL8 wired: pin1+: linked internally; pin1-: linked internally; pin 2+: LMF
positive; pin 2-: LMF negative; pin3+: HMF positive; pin 3-: HMF negative; pin4+: HF positive;
pin 4-: HF negative
Notes
1
Measured on axis
2
Average over stated bandwidth
3
Average over stated bandwidth
4
Unweighted diode-clipped pink noise. Measured in a half space environment.
5
Verified by subjective listening tests of familiar program material, before the onset of perceived signal
degradation.
page 4
datasheet
ASPECT SERIES ENGINEERING INFORMATION TA-890H
130
HIGH FREQUENCY
Fundamental
Ref.
RESPONSE
120 10% Power
Sound Pressure Level in dB
110
Sensitivity
1W/1M
Distortion %
100
90
1.0%
2nd Harmonic
10% Power
80
3rd Harmonic
10% Power
70 0.2%
0.1%
60
20 Hz 50 100 200 500 1 kHz 2 5 10 20
Frequency
130
Ref.
HIGH-MID FREQUENCY
120 Fundamental RESPONSE
10% Power
Sound Pressure Level in dB
110 Sensitivity
1W/1M Distortion %
100
90
1.0%
80
2nd Harmonic
10% Power
0.2%
70 3rd Harmonic
10% Power
0.1%
60
20 Hz 50 100 200 500 1 kHz 2 5 10 20
Frequency
130
LOW-MID FREQUENCY
Ref.
120
Fundamental
RESPONSE
10% Power
110
Sound Pressure Level in dB
Distortion %
100 Sensitivity
1W/1M
90
1.0%
80
2nd Harmonic
10% Power
70 3rd Harmonic
10% Power 0.2%
0.1%
60
20 Hz 50 100 200 500 1 kHz 2 5 10 20
Frequency
Impedance A constant current circuit was used to measure the impedance. Frequency response The frequency response
NOTES ON
shown was obtained by feeding a swept sine wave through the system in a half space environment. The position of the
microphone was vertically on-axis at a distance of 2 metres, then scaled to represent 1 metre. 2nd & 3rd Harmonic Distortion MEASUREMENT
Distortion measurements were obtained using an Audio Precision harmonic distortion analysis system and comply with CONDITIONS
AES recommendations for enclosure measurement (AES paper ANSI S4-26-1984). Data Conversion All graphs were digitally
generated using the APEX custom software system, designed to translate data derived from Audio Precision ‘System
One’ test equipment into AutoCAD™. This program enables graphical information to be plotted to a high degree of
accuracy.
page 5
datasheet
TA-890H ASPECT SERIES ENGINEERING INFORMATION
300
200
HIGH FREQUENCY
IMPEDANCE 100
16
10
8
1
20 Hz 50 100 200 500 1 kHz 2 5 10 20
Frequency
HIGH-MID 300
IMPEDANCE 200
100
16
Ohms
10
8
1
20 Hz 50 100 200 500 1 kHz 2 5 10 20
Frequency
300
200
LOW-MID IMPEDANCE
100
16
Ohms
10
8
1
20 Hz 50 100 200 500 1 kHz 2 5 10 20
Frequency
Impedance A common method, constant current circuit was use to measure the impedance. Frequency Response The
NOTES ON
frequency response shown was obtained by feeding a swept sine wave through the system in a half-space environment.
MEASUREMENT The position of the microphone was vertically on-axis, horizontally in-line with the MF/HF section at a distance of 3
CONDITIONS metres, then scaled to represent 1 metre. 2nd & 3rd Harmonic Distortion Distortion measurements were obtained using an
Audio Precision harmonic distortion analysis system and comply with AES recommendations for enclosure measurement
(AES Paper reference: ANSI S4-26-1984). Data Conversion All graphs were digitally generated using the APEX custom
software system, designed to translate data derived from Brüel & Kjæl and Audio Precision “System One” test
equipment into AutoCAD™. This program enables graphical information to be plotted to an accuracy of more than four
decimal places.
page 6
datasheet
ASPECT SERIES ENGINEERING INFORMATION TA-890H
HORIZONTAL THIRD
0°
0°
OCTAVE POLARS
30
30
33
33
°
°
0°
0°
30 60 30 60
0° ° 0° °
10 0 10 20 30 40 40 30 20 10 0 90° 10 0 10 20 30 40 40 30 20 10 0 90°
270° 10
270° 10
0° 0° 0° 0°
24 12 24 12
0°
0°
0°
0°
630 Hz
15
15
315 Hz
21
21
180°
180°
400 Hz 800 Hz
500 Hz 1 kHz
0°
0°
30
30
33
33
°
°
0°
0°
30 60 30 60
0° ° 0° °
10 0 10 20 30 40 40 30 20 10 0 90° 10 0 10 20 30 40 40 30 20 10 0 90°
270° 10 270° 10
0° 0° 0° 0°
24 12 24 12
0°
0°
0°
0°
2.5 kHz
15
15
1.25 kHz
21
21
180°
180°
0°
30
30
33
33
°
°
0°
0°
30 60 30 60
0° ° 0° °
10 0 10 20 30 40 40 30 20 10 0 90° 10 0 10 20 30 40 40 30 20 10 0 90°
270° 10 270° 10
0° 0° 0° 0°
24 12 24 12
0°
0°
0°
0°
10 kHz
15
15
5 kHz
21
21
180°
180°
page 7
datasheet
TA-890H ASPECT SERIES ENGINEERING INFORMATION
VERTICAL THIRD
0°
0°
OCTAVE POLARS
30
30
33
33
°
°
0°
0°
30 60 30 60
0° ° 0° °
10 0 10 20 30 40 40 30 20 10 0 90° 10 0 10 20 30 40 40 30 20 10 0 90°
270° 10
270° 10
0° 0° 0° 0°
24 12 24 12
0°
0°
0°
0°
630 Hz
15
15
315 Hz
21
21
180°
180°
400 Hz 800 Hz
500 Hz 1 kHz
0°
0°
30
30
33
33
°
°
0°
0°
30 60 30 60
0° ° 0° °
10 0 10 20 30 40 40 30 20 10 0 90° 10 0 10 20 30 40 40 30 20 10 0 90°
270° 10 270° 10
0° 0° 0° 0°
24 12 24 12
0°
0°
0°
0°
2.5 kHz
15
15
1.25 kHz
21
21
180°
180°
0°
30
30
33
33
°
°
0°
0°
30 60 30 60
0° ° 0° °
10 0 10 20 30 40 40 30 20 10 0 90° 10 0 10 20 30 40 40 30 20 10 0 90°
270° 10 270° 10
0° 0° 0° 0°
24 12 24 12
0°
0°
0°
0°
10 kHz
15
15
5 kHz
21
21
180°
180°
page 8
datasheet
TA-890H ASPECT SERIES ENGINEERING INFORMATION
ARCHITECTURAL The loudspeaker system shall be of the tri-amped, three way active type, consisting of two
& ENGINEER’S 10” low-mid frequency drivers loaded with TurboMid™ devices, one 10” high-mid driver on
SPECIFICATIONS an HMF Polyhorn™, and two HF drivers on an HF Polyhorn™. Performance specifications of a
typical production unit shall meet or exceed the following: Frequency response, measured
with swept sine wave input, shall be flat within ±4dB from 95Hz - 20kHz. Nominal impedance
shall be: LMF: 8 ohms, HMF: 16 ohms, HF: 12 ohms. Power handing shall be LMF: 500 watts
r.m.s., 1000 watts program; HMF: 200 watts r.m.s., 400 watts program; HF: 100 watts r.m.s.,
200 watts program. Sensitivity, measured with 1 watt input at 1 metre distance on axis, mean
averaged over stated bandwidth, shall be LMF: 107dB, HMF: 114dB, HF: 111dB. Maximum
SPL (peak), measured with music program input at stated amplifier power shall be 146dB.
Dimensions: 795mmH x 477mmW x 574D (31.3” x 18.8” x 22.6”). Weight: 76 kg (167 lbs). The
loudspeaker system shall be the Turbosound TA-890H. No other loudspeaker system shall be
acceptable unless submitted data from an independent test laboratory verify that the above
combined performance/size specifications are equalled or exceeded.
DIMENSIONS
574mm
[22.6"]
TOP
795mm
[31.3"]
477mm
[18.8"]
BOTTOM
TA-890H Version 1.2 12/07 TURBOSOUND Ltd Star Road Partridge Green West Sussex RH13 8RY England
© Turbosound 2005 tel: +44 (0) 1403 711447 fax: +44 (0) 1403 710155 • www.turbosound.com