Professional Documents
Culture Documents
EM : EuroMech Awards
Program Overview – Sunday, March 25th 2018
18:00
La Cité des Congrès - Mezzanine
8:00
Registration & Coffee
8:45
Auditorium 450
Opening
Introduction to EMMC
...
9:15
Auditorium 450
Plenary Lecture
To Switch or Not To Switch - Bridging Across Scales in Ferroelectric Ceramics
Dennis Kochmann
10:00
Audit. 450 Room 200 Room GH Room I Room KL Room J Room M Room N
S3 S19 EM S12
11:00
Coffee break
11:30
Audit. 450 Room 200 Room GH Room I Room KL Room J Room M Room N
14:00
Audit. 450 Room 200 Room GH Room I Room KL Room J Room M Room N
S3 S19
Chair.
11:00
S3 S19 S8 S10
Chair.
11:50 Observation and modeling of Atomistically Informed A flexible ’two-surface’ Thermodynamics and
internal stresses around twin Dislocation Dynamics gradient-extended damage multi-physical model in metal
lamellae in beta-metastable Computations: Application to model for quasi-brittle and subject to corrosive
Ti-alloy, Delannay Laurent, Lin the Simulation of Interactions ductile materials, Brepols Tim, environment, Saliya
Fengxiang between Dislocation and Wulfinghoff Stephan, Reese Kanssoune, Panicaud Benoit,
Radiation-Induced Loops in Stefanie Labergere Carl
Zirconium, Kassem Wassim,
Dupuy Laurent, Onimus Fabien
12:10 Mechanical validation of a Validation and constitutive Combining bulk damage and Multi-physics modeling of
multiscale stochastic modelling closure of continuum plasticity cohesive zone models with the fracture in polycrystalline
of NiTi shape memory alloys models through data-mining of Thick Level Set approach to cathode in Lithium-ion battery,
thermomechanical behavior, Discrete Dislocation Dynamics quasi-brittle fracture, Le Avtar Singh, Pal Siladitya
Chang Xuyang, simulations, Sandfeld Stefan, Benoı̂t, Moës Nicolas, Legrain
Lavernhe-Taillard Karine, Po Giacomo, Gunkelmann Nina Grégory
Hubert Olivier
12:30
Lectures: Monday, March 26th 2018 – Morning
Room KL Room J Room M Room N
EM S12
Chair.
11:00
EM S12 S20
Chair.
11:50 Cohesive zone calibration using Microstructural characterization Dynamic fragmentation of rings:
GTN material model, of an IN718 linear friction weld, Experimental and Numerical
Andersen Rasmus, Felter Boyat Xavier et al. Approach, Klocker Helmut,
Christian, Nielsen Kim Lau Zappa Don-Pierre, Damamme
Gilles, Klocker Helmut
12:10 A coupled-field model of silicon Atomistic study of the Structural response under
anode charging in lithium-ion reorientation behaviors in stochastic impact loading,
batteries, Werner Marek, magnesium single crystals, Zu Troian Renata, Khalij Leila,
Weinberg Kerstin Qun, Guo Yafang Lemosse Didier, Dallali Manel
12:30
Lectures: Monday, March 26th 2018 – Afternoon
Audit. 450 Room 200 Room GH Room I
S3 S19 S8 S10
Chair.
14:00 Constitutive modelling of creep in Conformal discetization of complex Limitations of the delay damage Isogeometric analysis for modeling
nickel-based single crystal heterogeneous RVEs, Massart model and the need for spatial chemical transformations front
superalloys, Jha Aalok, Upadhyay Thierry, Ehab Moustafa Kamel regularization, Zghal Jihed, Moës kinetics, Morozov Aleksandr et al.
Chandra Shekhar Karim, Sonon Bernard Nicolas
14:20 Control-point based hybrid Aspects of RVE topolgy, mesh A new rate dependent damage Mechanics and fracture of tough
discontinuous Galerkin method for discretization and boundary model to simulate dynamic crack hydrogels below water-freezing
geometrically nonlinear crystal conditions in practical multiscaling propagation in quasi-brittle temperature, Morelle Xavier et al.
plasticity, Alipour Atefeh, for particulate composites, materials, Mandapalli Prithvi, Sluys
Wulfinghoff Stephan, Reese Schneider Konrad, Klusemann Lambertus, Weerheijm Jaap
Stefanie Benjamin, Bargmann Swantje
14:40 An advanced numerical framework Modeling the physical aging and Discrete element simulation of Modelling of heat generation in
for the comparison of synchrotron yielding of glasses, Hütter Markus, concrete fracture under different vehicle components made of rubber
X-ray diffraction experiments and Hütter Markus loading velocities using polygonal using FEM, Szüle Veronika
numerical simulations - application elements, Beckmann Birgit,
to grain-scale stresses in an Curbach Manfred
elastically-deformed NiTi shape
memory alloy, Villani Aurelien et al.
15:00 In-grain lattice rotation Stochastic simulations of Damage modeling of concrete Integrated modeling and
heterogeneities in deformed discontinuous dynamic affected by the alkali-silica reaction experiments of viscoelastic
aluminium: synchrotron X-ray recrystallization in HCP metals in varying environmental conditions, polymeric gels, Chester Shawn
diffraction experiments and finite under large deformation, Tutcuoglu Comi Claudia, Comi Claudia
element simulations, Romain Quey, Abbas, Vidyasagar Ananthan,
Renversade Loı̈c Bhattacharya Kaushik, Kochmann
Dennis
15:20 Effect of pre-existing dislocations on Argillaceous rock microstructure UHPFRC shear characterization for Studying Energy Dissipation
the strength of gold at very small considering variability and modelling and design of junctions, Mechanisms in Pseudoelastic Thin
scales - using EBSD data to heterogeneity for double scale Toutlemonde François, Baby Florent, Film Shape Memory Alloys for
characterize local dislocation modelling with hydro-mechanical Marchand Pierre, Toutlemonde Vibration Damping, Wendler Frank,
densities prior to nanoindentation, coupling, Bésuelle Pierre et al. François Ahmadi Shahabeddin, Jacob Kiran,
Guglielmi Paula, Ziehmer Markus, Kohl Manfred
Lilleodden Erica
15:40 Prediction of Scatter in Fatigue Life Self-consistent estimates for the Rapid crack propagation in A mechanoluminescent glass matrix
Using a Microstructure Sensitive thermoelastic response of cracked pharmaceutical tablets, Croquelois particulate composite, Rouxel
Local Energy Method, Maclachlan polycrystals with hexagonal Benjamin et al. Tanguy et al.
Duncan, Dunne Fionn symmetry, Willot François, Trumel
Hervé, Jeulin Dominique, Gasnier
Jean-Baptiste
S3 S19 S8 S10
Chair.
16:30 Plastic deformation and surface Variational homogenization for Estimating the stiffness and strength Recent advances in
roughening in contact shearing: A modeling the bending behavior of increase of a ceramic biomaterial magnetorheological elastomers and
finite strain discrete dislocation graphene, Favata Antonino due to bone regeneration by means harnessing instabilities in
study, Irani Nilgoon, Nicola Lucia of a micromechanical approach, film/substrate systems, Danas
Scheiner Stefan, Komlev Vladimir, Kostas
Gurin Alexej, Hellmich Christian
16:50 In-situ TEM Study of Migration of High frequency modulation in Homogenizing the thermoelastic Effective transient behaviour of
Interfaces between Austenite and periodic systems. Analytical behavior of a microcracked heterogeneous media in diffusion
Ferrite in a Duplex Stainless Steel, asymptotic study of reticulated polycrystal: correlated cracks and problems, Brassart Laurence,
Mompiou Frédéric, Du Juan, Zhang structures, Boutin Claude, Hans crystallographic orientations, Stainier Laurent
Wenzheng Stephane, Boutin Claude Trumel Hervé et al.
17:10 A configurational approach to A General Homogenization Cohesive stress heterogeneities and A discrete twin-boundary approach
modeling propagating strain bands: Framework for the Emergent the transition from intrinsic ductility for simulating the
application to the Portevin-Le Elastodynamics of Acoustic to brittleness, Tanguy Döme magneto-mechanical response of
Châtelier effect in aluminum alloys, Metamaterials and Phononic Ni-Mn-Ga, Shilo Doron, Faran
Reyne Baptiste, Manach Crystals, Sridhar Ashwin, Eilon, Riccardi Leonardo
Pierre-Yves, Moës Nicolas Kouznetsova Varvara, Geers Marc
17:30 Multi-scale modelling of plasticity Variationally consistent Multi-cracking of brittle thin films on Computational homogenisation of
and damage of martensite in computational homogenization of compliant elasto-plastic substrates, thermoplastic composites, Menzel
advanced steels, Kouznetsova transient heat conduction using Parry Guillaume, Ben Cheikh Ilhem, Andreas, Berthelsen Rolf
Varvara, Maresca Francesco, Geers Craig-Bampton mode synthesis, Estevez Rafael, Dalmas Davy
Marc Waseem Abdullah et al.
17:50 Martensite Fracture in Dual Phase Homogenized response of Calibration for material mechanical Homogenization of elastic dielectric
Steel – a computational study of the mechanical metamaterials with parameters in PFC2D and the ability composites containing space
influence of grain morphology, microstructures revealing patterned of PFC2D to model crack initiation charges, Lopez-Pamies Oscar
Sharma Luv et al. fluctuation fields, Geers Marc, and propagation for quasi-brittle
Ameen M.m., Rokoš O., Peerlings material, Liu Guixian, Koval Georg,
R.h.j. Chazallon Cyrille
18:10 Microstructural Origins of Fatigue Non-linear spectral homogenization Two-dimensional intergranular crack Concurrrent two-scale analysis of
Crack Nucleation in Ni Aero-engine solvers: How and why they work?, propagation in a mesh independent composites embedding phase
Alloys, Dunne Fionn Zeman Jan et al. framework with explicit damage change particles, Kodjo
update, Csati Zoltan, Massart Kossi-Mensah, Yvonnet Julien, Sab
Thierry J., Moës Nicolas Karam, Karkri Mustapha
Lectures: Monday, March 26th 2018 – Afternoon
Room KL Room J Room M Room N
EM S12 S20
Chair.
14:00 A volume-based aspiration method Monoclinic lath orientation choice Multiscale analysis of lightweight
to estimate in-vivo soft tissues and related local energy barriers for structures with uncertain material
stiffness: evaluation of the device microstructure structure formation in microstructure, Hohe Jörg,
with silicone samples, Elahi Seyed zirconia, Rajendran Mohan Kumar, Beckmann Carla, Tempel Peter,
Ali, Connesson Nathanael, Payan Budnitzki Michael, Kuna Meinhard Fliegener Sascha (Keynote)
Yohan
14:20 Seal Ring Toughness Experimental and numerical study of Scalable numerical homogenization
Characterization: A modified allotropic transformation in iron, scheme for random polycrystalline
Four-Point Bending Method for Bruzy Nicolas, Coret Michel, Stainier materials, Cottereau Régis,
Crack Front Monitoring, Raid Idir, Laurent, Huneau Bertrand Milanetto Schlittler Thiago,
Estevez Rafael, Gallois-Garreignot Soilahoudine Moindze
Sébastien, Coutellier Vincent
14:40 Computational micromechanics and Dynamics of twin boundaries in Representative Volume Element
homogenization of anisotropic FSMA Ni-Mn-Ga: mechanisms of Size for Viscoplastic Properties in
polyurethane foams, Marvi motion, energy barriers, and kinetic Polycrystalline Copper,
Mashhadi Mohammad, Lopes relations, Faran Eilon, Shilo Doron Dirrenberger Justin, Yang Shaobo,
Claudio, Llorca Javier Monteiro Eric, Ranc Nicolas
EM S16
Chair.
8:45
Auditorium 450
Plenary Lecture
Chemo-mechanics of metallic alloys
Raabe Dierk
9:30
Audit. 450 Room 200 Room GH Room I Room KL Room J Room M Room N
S3 S19 S9 EM S16 S1
10:30
Coffee break
11:00
Audit. 450 Room 200 Room GH Room I Room KL Room J Room M Room N
13:50
Audit. 450 Room 200 Room GH Room I Room KL Room J Room M Room N
Visit
20:00
”Les Machines de l’Île”
Banquet
23:00
Lectures: Tuesday, March 27th 2018 – Morning
Audit. 450 Room 200 Room GH Room I
S3 S19 S9
Chair.
9:30 Experimental and numerical Multiscale homogenization Valorization of the waste of the
multiscale analyses on the schemes for the construction of food industry to obtain a new
constitutive behavior of bimodal second order gradient formulation of eco-materials for
alloys, Flipon Baptiste, Barbe anisotropic continuum media of sustainable construction,
Fabrice, Keller Clément architectured materials, Chemani Halima
Ganghoffer Jean-François,
Rahali Yosra, Dos Reis
Francisco
10:30
S3 S9 S11
Chair.
11:00 Multilevel modelling: kinematic Kirigami based mechanical A novel time-evolving material
and constitutive relations at high metamaterials, Yin Jie model for the maturing
displacement gradients, pulmonary artery conduit,
Shveykin Alexey, Trusov Peter Sacks Michael
12:00 Constitutive modeling and Onset of Macroscopic Instability On the application of a new
numerical simulation of impacts in Dielectric Elastomer methodology to identify the
during Surface Mechanical Composites with particulate initiation of damage in
Attrition Treatment of microstructures, Rudykh modelling human aneurysms,
TWIP/TRIP steels, Chen Stephan, Goshkoderia Artemii C Karunakaran, Kannan K.
Zhenglin, Sun Zhidan, Panicaud
Benoı̂t
12:20
Lectures: Tuesday, March 27th 2018 – Morning
Room KL Room J Room M Room N
EM S16 S1
Chair.
9:30 Influence of viscosity and Plastic Poisson’s Ratio of Crack arrest capability of
plasticity on the chemical Nanoporous Metals: A shock-resistant PMMA under
reaction front propagation in Macroscopic Signature of impact loading, Longère
solids, Petrenko Svetlana, Tension-Compression Patrice, Longère Patrice
Charkaluk Eric, Freidin Asymmetry at the Nanoscale,
Alexander Lührs Lukas, Zandersons
Birthe, Huber Norbert,
Weissmüller Jörg
10:30
EM S22 S21 S1
Chair.
11:00 Quantification of shear Data-driven computational On stress and driving force Crack growth in low-density
flexoelectricity in ferroelectrics, mechanics based on manifold calculation within polyethylene, Kroon Martin
Mocci Alice, Abdollahi Amir, learning for elastic and plastic multiphase-field models:
Arias Irene behaviors, Abisset-Chavanne applications to martensitic
Emmanuelle et al. phase transformations,
Schneider Daniel et al.
(Keynote)
11:20 An experimental analysis of the Stamping Hybrid Twin, Phase field modeling of Micromechanics of oriented
effect of precipitate Quaranta Giacomo et al. deformation twinning in semicrystalline polymers, Van
strengthening on the β-metastable titanium alloys, Dommelen Hans, Mirkhalaf
mechanical response of Al-Cu Hamma Juba, Appolaire Benoı̂t, Mohsen, Govaert Leon, Geers
alloys by means of micropillar Le Bouar Yann, Finel Alphonse Marc
compression, Bellón Bárbara,
Rodrı́guez-Veiga Alejandro,
Sabirov Ilchat, Llorca Javier
11:40 Tiling concept in the RVE size A data-driven approach for Nucleation and transmission of Effect of photo-oxidation on
determination: a step beyond orientation kinematics of co-zone 10-12 deformation deformation and fracture of bulk
Periodic Unit Cell in modelling suspended rigid fibres, twins in Mg: A phase field polyamide bars, Cundiff
heterogeneous materials, Scheuer Adrien, simulation study, Liu Hong, Lin Kenneth, Benzerga Amine
Doškár Martin, Zeman Jan, Abisset-Chavanne Emmanuelle, Fengxiang, Moelans Nele
Jarušková Daniela, Novák Jan Chinesta Francisco, Keunings
Roland
12:00 A physically-based Application of a machine Migrating grain boundaries in a Investigation of the contact
methodology for the learning approach for the combined crystal plasticity and mechanisms of High Modulus
deterministic prediction of correction of experimental phase field approach, Ask Polyethylene ropes: mechanical
microstucturally-sensitive measured residual stresses Anna et al. characterization and
fatigue crack growth, Wilson based on the incremental hole microstructure changes, Bain
David, Dunne Fionn drilling technique, Klusemann Cédric et al.
Benjamin et al.
12:20
Lectures: Tuesday, March 27th 2018 – Afternoon
Audit. 450 Room 200 Room GH Room I
S3 S2 S9 S11
Chair.
13:50 An atomistic strategy to determine On the efficiency of the adaptive Role of mineral bridges in staggered Exploring the influence of damage
the activation energy for dislocation continuum shell element for the bio-inspired composites, Mahar accumulation on collagen fibre
interaction with Guinier-Preston analysis of damage and Aman, Pal Siladitya remodelling in arteries under
zones in Al-Cu alloys, Llorca Javier, delamination in layered supra-physiological loads, Ghasemi
Martı́nez Enrique, Segurado Javier, composites, Remmers Joris, Milad, Nolan David, Johnston
Llorca Javier Fagerström Martin (Keynote) Robert, Lally Caitrı́ona
14:10 Coupling experiments and Numerical Simulation Modeling Elastic instabilities and wave Modelling perfusion in liver
simulation to understand local Techniques for the Impact Behavior propagation in buckled compressible parenchyma using two-level
deformation mechanism in Ni of Carbon Fiber/Epoxy Laminate layered composite, Li Jian, Rudykh homogenization, Rohan Eduard,
micro-wire, Purushottam Raj Composite Plates, Ahmad Furqan, Stephan Lukeš Vladimı́r, Turjanicová Jana
Purohit Ravi Raj Purohit et al. Abbassi Fethi
14:30 Relaxation Mechanisms in a Multimaterial shell models for the Elastic Wave Propagation in Finitely Biomechanics of human cornea
Nanocrystalline Gold Thin Film on a analysis of triaxial braided Deformed Laminates, Galich Pavel, modeled via a generalized statistical
Compliant Substrate, Godard composites, Gonzalez Carlos, Rudykh Stephan approach, Gizzi Alessio, Vasta
Pierre, Pierre-Olivier Renault, Faurie Carpintero Alejandro, Herráez Marcello, Pandolfi Anna
Damien, Thiaudière Dominique Miguel, Lopes Claudio
14:50 Observation of deforming Novel analytical approach for A new higher order shear Optimization of Magnetic
polycrystalline microstructures using determining edge stresses in deformation model of functionally Resonance Imaging (MRI) based
a combination of 3D X-ray diffraction general composite laminates under graded beams, Zoubida Khelifa, Patient Specific Models with
and imaging techniques, Ludwig tension, Romera Jesus Maria, Lazreg Hadji mechanical property estimation from
Wolfgang et al. Mujika Faustino inverse finite element analysis,
Johnston Robert et al.
15:10 Work hardening and recovery Modeling of water diffusion Finite deformation of fibre-reinforced Constitutive modelling of collagen
behavior of fully lamellar TiAl alloys mechanism in PP/DATE palm fiber magneto-elastic rods, Ciambella turnover towards the expansion of
investigated by a defect density composite materials, Boukettaya Jacopo, Favata Antonino, Tomassetti abdominal aortic aneurysms, Miller
based crystal plasticity model, Sonia, Hachmi Bendaly, Sami Chatti, Giuseppe Christopher, Gasser T. Christian
Schnabel Jan Eike, Bargmann Alawar Ahmad
Swantje
15:30 Damage tolerant composites with An analytical and a micro-sphere Influence of angle on failure of
discontinuous and hierarchical based electroelastic model of growth rods in H3S2 construct,
microstructures, Pimenta Soraia, dielectric elastomers resulting from Croonenborghs Maı̈té, Ismail Karim,
Henry Joel molecular chain statistics, Itskov Mousny Maryline, Pardoen Thomas
Mikhail, Khiêm Vu Ngoc, Waluyo
Sugeng
15:50
S6 S2 S9 S11
Chair.
16:20 Ductile fracture modeling of Nacre-inspired CFRP with Modeling of Auxetic Metamaterials Engineered biomimetic nanopores:
aluminum thin CT and KAHN fractal-textured interfaces, Pinho Based on Micro-Dilatation Theory of unravelling nuclear transport through
specimens with bimodal void Silvestre, Narducci Federico Elasticity, Solyaev Yury, Lurie coarse-grained molecular modeling,
distribution and Coulomb fracture Sergey, Ustenko Anastasia Onck Patrick, Van Der Giessen Erik,
model, Rousselier Gilles, Onck Patrick
Morgeneyer Thilo
16:40 Fracture investigation on Al/NiTip Crack propagation in thin-ply Magnetomechanical macroscopic Characterization of irreversible
composite manufactured by friction composites: Experimental instabilities in magnetorheological physio-mechanical processes in
stir processing, Zhao Lv, Simar observations and multiscale elastomer composites with periodic stressed fetal membranes, Marom
Aude, Turteltaub Sergio modelling, Kohler Sébastien, Botsis microstructures, Goshkoderia Yulia, Goldman Shlomit, Shalev
John, Cugnoni Joël Artemii, Rudykh Stephan Eliezer, Shilo Doron
17:00 Analysis of material failure under Mode I delamination of a tufted Molecular dynamics simulations of Interfibrillar damage accumulation
shear-dominated loading, through-thickness reinforced surface welding and shape memory causes fatigue of soft fibrous
Benzerga Amine, Torki Mohammad composite, Pappas Georgios, behaviors of Diels-Alder networks, tissues: multi-scale mechanics and
Joncas Simon, Michaud Véronique, Yang Hua constitutive modeling, Hillgärtner
Botsis John Markus, Linka Kevin, Itskov Mikhail
17:20 Micromechanical modeling of porous Characterization and multi-scale Instabilities in the deformation of Homeostatic ensemble for cells,
ductile solids with isotropic and modeling of the transverse magnetoelastic membranes, Deshpande Vikram
linear kinematic hardenable matrix compression of thick Saxena Prashant, Saxena Prashant
under cyclic loading, Cheng Long, RTM-processed uni-directional
Danas Kostas, Constantinescu samples, Chevalier Jérémy et al.
Andrei, Kondo Djimedo
17:40 Void Coalescence Mechanism for The new algorithms to study Investigating the Uncertainty in
Combined Tension and Large statistical behavior of failure in Constitutive Model Calibration for
Amplitude Cyclic Shearing, Nielsen unidirectional fiber reinforced the Hyperelastic Behavior of Brain
Kim Lau, Andersen Rasmus, composites, Gupta Ankit, Mahesh Tissue, Brewick Patrick, Teferra
Tvergaard Viggo Sivasambu, Keralavarma Shyam M. Kirubel
18:00
Lectures: Tuesday, March 27th 2018 – Afternoon
Room KL Room J Room M Room N
EM S22 S21 S1
Chair.
13:50 Impact of machine stiffness and heat On the combination of stochastic Inverse Ripening of Precipitates, Micromechanical analysis of failure
treatments on crack propagation modeling, image analysis and Darvishi Kamachali Reza in thermoplastic PC/ABS blends,
instabilities in an Al-Mg-Si alloy, numerical simulation for virtual Hund Jonas, Seelig Thomas
Petit Tom, Ritter Claire, Besson materials testing, Schmidt Volker,
Jacques, Morgeneyer Thilo Schmidt Volker, Holzer Lorenz
14:10 Molecular dynamics simulation of Composite surface characterization Acicular microstructures in metallic Homogenization estimates for the
stress distribution in 2D systems, and classification through alloys: phase-field coupling between time harmonic response of
Pezer Robert, Trapič Ivan, Sorič datamining, Argerich Martin Clara diffusion, elasticity and plasticity, particulate viscoelastic composites,
Jurica et al. Lebbad Hocine, Appolaire Benoı̂t, Gallican Valentin, Brenner Renald
Le Bouar Yann, Finel Alphonse
14:30 Discrete Dislocation Dynamics Fast and Memory Efficient Elasto-plastic multiphase-field Constitutive modelling of
Simulation of Dislocation/Precipitate Two-Scale Simulations of modeling of martensitic phase hyperelastic rubber-like materials
Interaction in Al-Cu alloys, Santos Components by Combining transformation in an EBSD-based considering damage, Toups
Rodrigo, Capolungo Laurent, Model-Reduction Methods with the dual-phase microstructure, Schoof Elisabeth, Simon Jaan-Willem,
Segurado Javier, Llorca Javier Composite Voxel Technique, Kabel Ephraim et al. Reese Stefanie
Matthias
14:50 Light-guided Topographical The use of compressive sensing in Influence of elastic interactions on Thermomechanics and
Switching of computational mechanics, Ibánez the precipitate arrangement in crystallization behavior at crack tips
Azobenzene-functionalized Liquid Pinillo Rubén et al. single-crystal superalloys, Degeiter in elastomers, Zybell Lutz
Crystal Polymers, Liu Ling Matthieu et al.
15:10 Non-parametric identification of Phase Field of Modeling of Pore Effects of speed and friction on the
material state database from Annihilation in Nickel-base plastic deformation of a polymer
full-field measurements, Réthoré Superalloys During Hot Isostatic material during extrusion ECAE:
Julien et al. Pressing, Le Bouar Yann, Ruffini Numerical study, Boulahia
Antoine, Dabas Benoit, Finel Ramdane, Samir Hariti
Alphonse (Keynote)
15:30 Model & system learners, optimal Curing simulations on the basis of a Evolution of free Surface due to
process constructors and kinetic phase-field model, Schwab Felix et Surface Tension in Viscoelastic Fluid
theory-based goal-oriented design: al. Flows, Prasad G. Durga, Kannan
a new paradigm in materials and K.
processes informatics, Chinesta
Francisco
15:50
S22 S21 S7
Chair.
16:20 Wavelet Based Reduced Order A Sharp Interface Phase Field Micromechanistic and
Model for Computational Method, Finel Alphonse, Le Bouar microstructural design of titanium
Homogenisation, Van Tuijl Rody et Yann, Dabas Benoı̂t alloys for resisting cold dwell fatigue,
al. Zhang Zhen, Dunne Fionn
16:40 Model Order Reduction of Nonlinear Modeling of Lüders band formation Multiscale modelling study of low
Homogenization Problems by a using the phase field approach, cycle fatigue behaviour of an
Hashin-Shtrikman Type Finite Kulkarni Nikhil, Herrmann Christoph, austenitic stainless steel processed
Element Method, Wulfinghoff Schneider Daniel, Nestler Britta by Surface Mechanical Attrition
Stephan, Cavaliere Fabiola, Reese Treatment, Zhou Jianqiang, Sun
Stefanie Zhidan, Kanouté Pascale, Retraint
Delphine
17:00 Application of a non-intrusive and Modelling inheritance of plastic Microstructure Sensitive Crack
parametric reduced order model of delformation during migration of Nucleation in PM Ni Alloys, Chen
crash simulation in several design phase boundaries using Phase Field Bo, Jiang Jun, Dunne Fionn
processes, Le Guennec Yves, method, Ammar Kais, Forest
Brunet Jean-Patrick, Daı̈m Fatima, Samuel, Appolaire Benoı̂t
Tourbier Yves
17:20 A Latin-PGD approach for high cycle Open issues in phase field A crystal-plasticity based model for
fatigue computations, Nackenhorst approaches to brittle fracture, the early stages of fatigue damage,
Udo et al. Strobl Michael, Seelig Thomas Mareau Charles
17:40 POD based model reduction for On the crystallographic, stage I-like,
SFEM based computational character of fine granular area
homogenization, Pivovarov Dmytro, formation in internal fish-eye fatigue
Steinmann Paul, Willner Kai cracks, Morgeneyer Thilo et al.
18:00
Program Overview – Wenesday, March 28th 2018
8:45
Auditorium 450
Plenary Lecture
Micromechanics of deformation and fracture in highly cross-linked thermosets
Pardoen Thomas
9:30
Audit. 450 Room 200 Room GH Room I Room KL Room J Room M Room N
S6 S2 S5 S14 S15 S4 S7
10:30
Coffee break
11:00
Audit. 450 Room 200 Room GH Room I Room KL Room J Room M Room N
14:00
Audit. 450 Room 200 Room GH Room I Room KL Room J Room M Room N
S6 S2 S5 S14
Chair.
9:50 Bifurcation Analysis of Unit Cell Micromechanical study of the On the mechanical behaviour of Cardiovascular devices:
to Determine Macroscopic origin of fiber bridging in mode I SLM AlSi10Mg and its Mechanical characterization of
Localization, Janarthanam interlaminar and intralaminar improvement by friction stir aortic valves, Huchet François,
Hemanth, Schmidt Ingo, fracture, Naya Montáns processing, Santos Guillermo Guérin Patrice, Jordana
Sommer Silke Fernando, Pappas Georgios, et al. Fabienne
Cugnoni Joël, Botsis John
10:10 A reduced micromorphic single Influence of Fiber Waviness on Influence of the local thermal An Image-Based Impact Test for
crystal plasticity model to study Compressive Response of history and microstructure on the High Strain Rate Properties
localization and void growth in Fiber-Reinforced Composites the wear behaviour of laser clad of Tungsten Carbide, Fletcher
ductile metals, Tanguy Benoit using Micromechanical high speed thick coatings, Lloyd, Pierron Fabrice
et al. Approach, Naderi Mehdi et al. Mertens Anne et al.
10:30
S6 S2 S5 S14
Chair.
11:00 Numerical implementation and A Computational Micromechanical behavior and Image-based stress field
validation of a homogenized Micromechanics Study of the thermal stability of a dual-phase reconstruction in complex
model for nanoporous metallic Ballistic Performance of α + α0 titanium alloy produced media, Seghir Rian, Pierron
materials, Scherer UHMW-PE Composites, Varun by additive manufacturing, Fabrice, Fletcher Lloyd
Jean-Michel, Hure Jérémy Raj Ramachandran, Peerlings Godet Stephane et al.
Ron, Deshpande Vikram
11:20 Coalescence yield criteria for Modeling dual-phase structures: Fatigue damaging mechanisms Data-Driven Identification and
materials with small-scale voids, a dream. 3D-Abaqus coupling, of Ti-6Al-4V samples produced analysis of mechanical
Hure Jérémy, Nielsen Kim, Bonifaz Edison by Selective Laser Melting and response through
Gallican Valentin Electron Beam Melting, heterogeneous experiments,
Chastand Victor, Quaegebeur Leygue Adrien et al.
Philippe, Maia Wilson, (Keynote)
Charkaluk Eric
11:40 A modified Gurson model Face sheet-to-core debonding Fatigue mechanisms of Modelling and Simulation of
accounting for Lode-dependent analysis in sandwich panels Ti-6Al-4V cellular structures Shear Rheometry on Soft
void growth, Dæhli Lars under dynamic loading, fabricated by Electron Beam Cohesive Soils, S Sumith, K
Edvard, Morin David, Børvik Burlayenko Vyacheslav, Melting, Persenot Théo et al. Kannan, K Shankar
Tore, Hopperstad Odd Sture Sadowski Tomasz, Dimitrova
Svetlana
12:00 Combining interfacial and bulk Viscoelastic behaviour of Microstructural evolution and Method to extract stress-strain
plasticity for ductile failure with nanocomposites reinforced with mechanical properties of relations from pure torsion or
the thick level set approach carbon nanostructures, Inconel 625 processed by Laser pure bending experimental
(TLS), Moës Nicolas PLA/CNT-COOH, Guedes Rui, Metal Deposition and by tests, Connesson Nathanael,
Guedes Rui Selective Laser Melting, Favier Denis, Antherieu Gabriel
Nguejio Josiane, Szmytka
Fabien
12:20 Hardening of porous single Durability of mechanical Multiscale mechanical Using correlative HRDIC, EBSD
crystals: an approximate performances of composite observations of 316L and ECCI to answer questions
description using sequential assemblies in a specimens obtained by a direct of microstructure-specific
limit-analysis, Brenner Renald, hygro-thermo-mechanical laser deposition technology: plasticity, Harte Allan et al.
Paux Joseph, Kondo Djimédo environment, Pivdiablyk influence of writing parameters,
Ivanna et al. Balit Yanis, Constantinescu
Andrei, Charkaluk Eric
12:40
Lectures: Wenesday, March 28th 2018 – Morning
Room KL Room J Room M Room N
S15 S4 S7
Chair.
9:30 Composition dependence of Increase of fracture energy by Cyclic loading and delayed
mechanical properties of cubic microstructure design of hydride cracking in Zr-alloys,
and hexagonal NbCo2 Laves refractory materials. Reali Luca, Balint Daniel,
phases, Luo Wei, Kirchlechner Investigations by coupling Wenman Mark, Sutton Adrian
Christoph, Dehm Gerhard, wedge splitting tests with
Stein Frank adapted DIC technique, Huger
Marc et al.
9:50 Hysteretic mechanical behavior Which representative volume Thermal cycling of Phase
of the MAX phase Ti2AlN element to account for rupture?, Change Material: a coupled
studied by nanoindentation and Aubin Véronique, Ciria Desiree, method for the identification of
micropillar compression tests, Dezanneau Guilhem, Aubin thermal properties, Davin
Tromas Christophe et al. Veronique Tanguy, Guillet Alain, Lefez
Benoı̂t
10:10 Robust architectured materials: Modeling of the elastic and NDT Evaluation of steels
deformation and failure under fracture behavior of nacre-like behaviour submitted to uniaxial
cyclic loading, Schwaiger alumina using a discrete tensile, Zergoug Mourad
Ruth, Wheeler Jeffrey M., approach, Radi Kaoutar,
Schwaiger Ruth Martin Christophe, Jauffrès
David
10:30
S15 S18 S4 S7
Chair.
11:00 Nanoindentation cartography A micromorphic Finding representative material Heat Sources Effects on the
method to map the mechanical computational parameters for complex Stress Intensity Factor for a
properties of the cell walls of an homogenization framework constitutive models used in Long Fatigue Crack,
Al-Si aluminum foam, Giouse for heterogeneous materials ceramic powder compaction, Boussattine Zaid, Ranc Nicolas,
Jean-Baptiste, Tromas in finite deformation, Poh Buljak Vladimir, Pandey Palin-Luc Thierry
Christophe, White Ken Leonghien (Keynote) Shwetank, Romero Severine,
Kallel Achraf
11:20 3D Laue Micro-Diffraction Interface modelling by a Models for ceramic powder Fatigue behavior and life
characterization of local nonlocal interphase – a forming, Bigoni Davide prediction of Flax fibre
microstructure and strain with comparison of approaches, thermoplastic composites,
submicron resolution, Peerlings Ron et al. Mondher Haggui et al.
Renversade Loı̈c et al.
11:40 New dedicated methods for the Non-local modeling: Damage in silica glass due to Fatigue behavior of notched
improvement of quantitative macroscopic behavior of a laser shock: Experiments and short glass fiber reinforced
in-situ TEM nanomechanical randomly voided material and simulations, Dereure Corentin thermoplastics, Raphael Ilan,
testing, Idrissi Hosni et al. influence of void morphology on et al. Saintier Nicolas,
the elastic properties gradient, Laiarinandrasana Lucien,
Ben Elhaj Salah Sami, Nait-Ali Robert Gilles
Azdine, Gueguen Mikaël,
Nadot-Martin Carole
12:00 On a chip fracture mechanics On revisiting size-dependent Numerical simulation of the The Effect of the Environment
test method, Jaddi Sahar, beam theories in gradient UO2 viscoplasticity at the on High Temperature Fatigue
Coulombier Michael, Raskin elasticity, Lurie Sergey, polycrystal scale: microscopic Behaviour of Carbon/Polyimide
Jean-Pierre, Pardoen Thomas Solyaev Yury, Tuchkova Natalia validation, Portelette Luc et al. Textile Composites for Aircraft
Applications, Gigliotti Marco,
Pannier Yannick, Mellier David,
Gigliotti Marco
12:40
Lectures: Wenesday, March 28th 2018 – Afternoon
Audit. 450 Room 200 Room GH Room I
S6 S2 S5 S14
Chair.
14:00 Unfolding the effect of residual Image-based impact (IBI) tests Microstructural and Study of the tensile anisotropy
ferrite on damage and fracture for high-rate behaviour of Nano-Hardness in 316L+WC of extruded ODS steel tubes
resistance in a martensitic composites, Pierron Fabrice, Composite Coatings Processed using notched rings, Jaumier
stainless steel for automotive Van Blitterswyk Jared, Pierron by Laser Cladding, Maurizi Thibaud, Vincent Sébastien,
application, Miotti Bettanini Fabrice Enrici Tommaso et al. Desmorat Rodrigue, Vincent
Alvise et al. Ludovic
14:20 Quantitative assessment of A Novel Protocol for Rapid Definition on a REV based on Experimental validation of a
the impact of second phase Identification of Anisotropic fused deposition modelling stress identification algorithm
particle arrangement on Diffusion Properties of process parameters, Le Verge without constitutive equations,
damage and fracture Composite Materials with Guillaume Dalemat Marie, Coret Michel,
anisotropy, Hannard Florent, Complex Texture, Beringhier Leygue Adrien, Verron Erwan
Simar Aude, Pardoen Marianne, Gigliotti Marco,
Thomas, Maire Eric Maida Diego
(Keynote)
14:40 Study of crack propagation on Comparative study of the A numerical study on the Modeling of puncture-cutting
double notched steel specimen mechanical behavior of a multiphysical additive forces of a soft material based
– numerical and experimental clay-based materials of M’sila manufacturing process for on fracture mechanics, Triki
results comparisons, Serveaux region reinforced by vegetal ceramics, Westbeek Steyn, Ennouri, Barthelat Francois,
Jérémy, Labergere Carl, fibers (Date Palm), Benyahia Remmers Joris, Van Dommelen Gauvin Chantal
Saanouni Khemais, Bumbieler Azzedine et al. Hans, Geers Marc
Frédéric
15:00 Damage mechanisms and Kinetic effects on Predicted microstructures in In-situ investigation of
fracture toughness of themechanical properties of repair technology of Ti-6Al-4V, heterogeneous plastic
dual-phase steels exhibiting a fibre reinforced Habraken Anne Marie et al. deformation in copper
platelet-like microstructure, thermoplasticlaminate under polycrystal with bimodal grain
Ismail Karim et al. indentation and impact sizes, Lin Fengxiang, Shi
loadings, Cadieu Lucien et al. Qiwei, Delannay Laurent
15:40 Prediction of fracture strain for Modelling the flow of a fiber Non-uniqueness of the
AHSS sheets using different filled polymer induced by a FDM viscoelastic properties
fracture models, Barnwal 3D printer, Mezi Dihya, Ausias determined by sharp
Vivek Kumar, Lee Shin Yeong, Gilles, Férec Julien nanoindentation. Case of
Kim Jin-Hwan, Barlat Frédéric polypropylene, Barick
Mohamed Cheikh et al.
16:00
Lectures: Wenesday, March 28th 2018 – Afternoon
Room KL Room J Room M Room N
14:00 Hydrogen Embrittlement of Finite second and third-order On the debris-level origins of
Tungsten Induced by Deuterium gradient elasticity and plasticity, adhesive wear, Molinari
Plasma: Insights from Bertram Albrecht Jean-François, Warner Derek,
Nanoindentation Test, Fang Molinari Jean-François
Xufei et al.
14:20 Imaging the structural evolution Elastic second-gradient beams, Galling characterization and
in nanocrystalline metals during Amiot Fabien classification in several
mechanical deformation, stainless steels, Lesage
Kuebel Christian, Kashiwar Thibault et al.
Ankush, Kobler Aaron, Hahn
Horst
14:40 On chip study of the irradiation A thermodynamic consistent Discrete Element modeling of
creep behavior of copper films, strain gradient cyclic plasticity concrete under high
Onimus Fabien et al. model: A case study on cyclic confinement, Omar Ahmad
torsion behavior, Zhang Xu,
Zhao Jianfeng
16:00