Professional Documents
Culture Documents
○ ○ ○
RJ45 Crimping Tool
P/N Description Std Pkg Qty
Cat.6
Crimping for RJ12(6P) and RJ45(8P) plug, 1
6102-01002
both for solid and stranded wire used.
Cat.5e
The modular crimping tools to install
6102-01004 modular 8 keyed wire plugs on cordage 1
For RJ45(8P) shielded plug used only.
Telecom
Block
○ ○ ○
UTP Cables Stripper
P/N Description Std Pkg Qty
Outlet
Turning 3 circles to extract the jacket of UTP 1
6101-01001
cable, Both function for stripper and 110 tool
○ ○ ○
Management
110 Punch Down Tool
Wire
P/N Description Std Pkg Qty
Fiber Optic
cuts off wire end after termination
○ ○ ○
5 Pairs 110 Impact Tool
Tool
P/N Description Std Pkg Qty
○ ○ ○
Insertion Tool
CCTV Cabling
www.dintek.com.tw
59
Contents
○ ○ ○
LAN Maintenance Tool Kit
P/N Description Std Pkg Qty
Cable cutter x 1
Cable stripper x 1
6106-01003 Punch down tool x 1 1
Boot x 20
6P4C plug x 30
Cat.5e
8P8C plug x 30
UTP Twin tester x 1
Telecom
○ ○ ○
Stripper x 1
A/B fast epoxy glue x 1
ST & SC polish disc x 1
6106-02002
Glasses working pad x 1
1
Management
Wipe paper x 3
Kevlar cutter x 1
Wire
Crimp tool x 1
Cleanser x 1
Rubber working pad x 1
6um/1um/0.05um diamond polish film x 1
Fiber Optic
○ ○ ○
Microscope
P/N Description Std Pkg Qty
Tool
○ ○ ○
IDC Tool Kit
System
A handy, compact tool kit for crimp & punch down use
60
Contents
○ ○ ○
UTP Twin Tester
The DINTEK UTP tester provides instant identification of most The master and remote units separate for end-to-end
common voice and data cabling problems including shorts, testing of installed cabling or work sparatelly as 2 patch
opens, reversals, and incorrect polarity. cord test unit. Shorts, opens, reversals, or miswires are
Cat.6
easily detected within seconds as the continuously
Innovative 2-in-1 design features modular jacks for sequencing LED display immediately alerts you to
testing USOC and 568A/B cabling systems problems in the cabling system. Both pieces simply snap
Accurately verifies the continuity and sequence of and lock together when not in use, making it easy to
1-,2-,3-, and 4-pair voice and data channels carry and store.
Continuously-sequencing LED display provides a Designed to fit neatly into a toolbox or pocket, the UTP
Cat.5e
diagnostic readout that immediately detects shorts, tester has a convenient ‘ring’ feature for attaching to a belt
opens, reversals, and mis-wires at a glance of frame.
Simply snap and lock master and remote units The UTP tester should be used to check each channel from
together when not in use the station device to the system. In addition the UTP tester
Erognmically designed hand-held unit is light can be separated as 2 test unit to test all line cords. The
weight, rugged, and impact-resistant tester is used to verify or indicate wiring errors on 1-, 2-, 3-,
Telecom
Block
9 volt alkaline battery included and 4-pair voice and data channels. The continually
Carry case included sequencing LED provides instant indication of any shorts,
opens, reversals, and miswires.
Technical specification:
Outlet
Materials: ABS
Distance: 1,000m (3,280ft)
Power requirements: 9 volt battery
(standard or alkaline)
Weight: 240g (9 oz.)
Built-in interface: USOC,EIA 568B Caution
Management
Contact specification: 30 u” gold over nickel Do not use on live circuits
Wire
P/N Description
Fiber Optic
6201-03002 UTP Twin Tester with Carry Bag
Tool
Function 1: Function 2: End to End Test
Patch Cable Test
Cabinets
Network
CCTV Cabling
System
Standard
Tester Result:
Master Remote Tester Result
LED on GREEN LED on GREEN Good channel
LED on GREEN LED on RED Reversal
LED on RED LED off Short with in pair
Index
www.dintek.com.tw
61