Professional Documents
Culture Documents
The interview took place at Amity, Noida. It was for 2016 batch. The criteria was 70% in the
current degree. We had to sit in the interviews directly. They took 1 or more rounds of technical
rounds but there was only one HR round.
The company works in Networking and OS so be prepared with the topics thoroughly.
The questions in the interview were from C language. No java or any other language was asked,
so beware.
Q. Use bit wise XOR "^" operator for the second question.
Q. Different layers of OSI and TCP model. (As the company is involved in networking).
Answer: Multi programming opening different apps at a time. Multitasking accessing different
tabs in a browser. Different threads of a program.
Q. WAP in C which does not compile in C++. WAP in C which does not run in C++.
The interviewer was calm and friendly. Do not become excessively casual. Remain calm and try
to answer all the questions.
Like this page? +54 -9
1. One question on op-amp (schmitt trigger circuit) based asked to draw output waveform?
2. CMOS based NAND gate is given with one input passed through transmission gate find the
issues in circuit.
5. Significance of Q factor.
10. Design a 3 bit counter that count no.of 0's and 1's in serial data stream.
INTERVIEW.
Read basic of sequential circuits and very important topic is SET up and hold time.
……………………………………………………………………………………………………………………………………………………
This year they were looking for far less number as they were on last year.
12 questions were asked total 80 marks paper each question had diff weight-age.
1. Op-amp based question : 2 op-amps both non inverting, share common input (+ive to one -ve
end of input to other) , inverting terminal shorted to ground, having positive feed back and series
resistance also, generate the output waveform with sine input and output of both op-amp was
given to and gate. 10 marks I think.
Also series RLC circuit with same are but different bandwidth, why with reason.(depends on
quality factor varies inversely to c and directly to l) 4 marks.
3. Shannon hartley theorem based question and snr based i.e. SNR = 6n
+1.76. Find no of levels 'n' 10 marks.
4. cmos circuit with transmission gate control, find the issue (was floating at some point and
limiting voltage issue I. E vgs-vtn) 5 marks.
9. Problem on cache (what I remember is power was asked and two solution were given for the
problem in cache design which is better).
11. Simple minterms calculation from circuit and reduction with k-map. 5 marks.
12. Find the set up time violations from input to first register with clock skew and input is 10
nanosec. Delayed w.r.t. Clock. . Here one thing new was that wiring delay was also given like. 4
ns. 10 marks.
All marking are just what I remembered may carry 2-3 marks more or less.
What I will suggest is just go fresh minded even if you have prepared a lot you might put in your
more effort while solving but they need is straight forward answer in written paper specially, don't
be elaborative.
Just go relaxed because sometime question asked is simple but requires your concentration (i.e.
On time analysis capability) which we loses in between because of stress and in hurry to get
selected.
As my friend always told me "don't quit in between" i.e go slowly till the end time they ask you to
just hand over your sheet. Generally what we do at end is, let it go enough is done.
Hi Friends
Ans:- Simple, this is simple 2:1 MUX Where A,B are inputs
And C is select pin or clock.
In Latch if clock is low its maintain output as its previous stage means no change.
So if connect output Y to A. then this is implemented by latch.
3. Set up time, hold time was given and some delay in b/w
Max freq.=1/(transition delay+setup time) No hold time.
7. Two buffer ckt were given what is the difference b/w them?
8. CMOS inverter main yadi PMOS and NMOS ko interchange ker de to bo buffer bun jata hai.
9. Three ckts of inverter was give in which they asked about power dissipation....with ON time
was 40% while off time 60%.
A. Simple CMOS inverter. B. Res was connected to VDD and PMOS
C. NMOS Connected to VDD and res.
So less on ckt was PMOS BECOZ ON TIME WAS 40% SO less power diss compare to C. While
in A no res so very less power dissipation.
Akamai - Alcatel Lucent - Allfon - Alumnus - Amazon - Amdocs - AMI - Andhra Bank - AppLabs -
Apps Associates - Aricent - Ashok Leyland - Aspire - Atos Origin - Axes - Bajaj - Bank of
Maharashtra - BEL - BEML - BHEL - BirlaSoft - Blue Dart - Blue Star - BOB - BPCL - BPL -
Brakes - BSNL - C-DOT - Cadence - Calsoft - Canara Bank - Canarys - Capgemini - Caritor -
DeShaw - Deutsche - Dotcom - DRDO - EDS - EIL - ELGI - ELICO - ERICSSON - Essar -
HP - HPCL - HSBC - Huawei - Hughes - IBM - IBS - ICICI - iGate - Impetus - iNautix - Indian
Airforce - Indian Airlines - Infosys - Infotech - Intec - Integra - Intergraph - IOCL - iSOFT - ISRO -
Ittiam - JSW - Keane - Kenexa - L & T - L & T Infotech - LG Soft - Lifetree - LionBridge -
Mistral - Motorola - Mphasis - MTNL - NIC - Nokia Siemens - Novell - NTPC - Nucleus -
ORACLE - Patni - Perot - Polaris - Ramco - Robert Bosch - Samsung - SAP - Sapient - Sasken -
SBI - Sierra Atlantic - Sonata - Sony India - Sutherland - Syntel - TCS - Tech Mahindra -
………………………………………………………………………………………………………………………………………………………..
Hi Friends
I am Rakesh Jha one of the student of NIT JAL. Freescale came to my institute and finally 2 are
sellected.
Paper totally based on digital switching theory and mos operation n/w and elex.
q1.there are xor ckt and gave the wave of i/p with delay find out the delay. plz concentrate some
delay in ms some in ns.
q3.two question from clock skew.(concept of hold time, setuup time and cq)
q4.find out the output impendence of ckt(gm1 and gm2 are in series with resistance r1 and r2.
q7.if clock is given i/p is given in form of 1 0 10 then find waveform of o/p
I give one suggestion only study digital and concept of wave drawing.
3.The process of varying one signal according to the pattern provided by another signal is
ans:modulation
8.a=2;
b=1;
x=1;
while(x<=4)
do {a=a+b;x=x+1}
ans:(5,1)
9.a=1;
b=2;x=1
while (x<=5)
do {b=a+b;x=x+1;}
ans:(1,6)
10.a=0;
b=0;
x=1;
while (x<=4)
{a=a+x;
b=b-x;
x=x+1;}
ans:(10,-10)
21.The elapsed time between the submission of the job and getting the output is
ans:seek time
27.A translator which reads an entire programme written in a high level language and converts
it into machine language code is
ans: interpreter
29.a computer generated output that lets programmer follow the execution
of the program line by line is
32.a distributed data processing configuration in which all activities must pass through an
centrally located computer is called a
ans: ring network
33.communication circuite that transmit data inboth directions but not at the same time
are operating in
35.For which of the folowing computer application is real time processing not essential
36.a data structure with one to many relationship is a
ans:tree
37. which of the following hardware components is most important to operation of a database
management system
ans:high speed,large capacity disk
38. computer viruses can spread from one system to another by means of
ans:all the above
40.a radioactive material of mass 16 grms in 10 years due to radiation. how many years will it
take for the material to attain a mass f1 gm
ans:30
41.a block of ice floats on water in a beaker, as the ice melts,the water level in the beaker will
ans:remain same
44.an acronym for the organisation that publishes programming langauge standards is
ans:ANSI
Q1- Design a black box with three ports A,B,C using 5 resistors of 1 ohm each such that
RAB=1.5 ohm, RAC=3.5 ohm and RBC=3 ohm.
Q2-It was a basic thevenin circuit with three parallel branches containing a current source of 2A
current, a resistor of 1 ohm and a battery source of 1V.We were asked to calculate the current in
the resistor.
Q7-A problem of finding the max frequency with 3 different parts. Each having a different clock
skew.
Q9-A tricky problem on Zener diode with an RC circuit...Had to sketch the voltage waveform
across the resistor
Q10-Data is coming at a rate of 600mhz and is transmitted at 150mhz.Calculate the size of the
FIFO required to avoid the overflow if 200 data bits are coming at a time and no data is received
until the previous data is completely transmitted?
Q11-A microprocessor has an instruction pattern such that the first 3 instructions take 1 clock
cycle each, the fourth one takes 2 and the fifth one takes 3 clock cycles. If 1 clock cycle=10ns.
Find the MIPS (million instructions per second) of the microprocessor?
Q12-A problem on dynamic power dissipation based on the input & output waveforms of a
sequential circuit.
Q13-Input & output waveforms for a circuit were given. Had to design the circuit to satisfy the
conditions.
Q14-A very easy opamp based problem to calculate the transfer function of the circuit.
Q15-A unusual problem again on power dissipation. Given the power dissipated in each stage of
the amplifier blocks..
THIS IS MAY B USEFULL FOR THOSE R SERIOUSLY PREPARE FOR FREESCALE FIST
INTRODUCTION OF COMPANY--IT IS BASICALLY MANUFATURE AND DESINING
COMPANY OF SEMICONDUCTOR CHIP AND STARTED 1N YEAR NEARLY 1968 US BASED
COMPANY....
IT HAVING 3 ROUND
1-TECH WRITTEN ROUND
2-TECH INTERVIEW
3-HR..
1) A BOX GIVEN ,,,IN BOX ONE INPUT A AND TWO OUTPUT B AND C....... WITH HTE USE
OF SIX 1OHM RESISTER ,,,WE HVE TO SHOW THE EQIVALENT RESISTANCE BETWEEN
A-B 1.2 OHM,,,,B-C-2 OHM,,,, A-C--2.2 OHM,,, 20 ONE QUESTION BASED ON TRANSIENT
THEORM OF NETWORK... BASED ON COMMUNICATION BIT N=12,,1/TS=300K,,,FIND THE
BANDWITH??? BASED ON ANALOG... OPEMP DB GAIN PROBLEM TECNICAL
INTERVIEW..... BASED ON WRITTEN...AND FOCUSED THE PART WHER U DIDN'T
PERFORM WELL.... HR ROUND... THEY ALREADY DECEIDED ACCORDING TO TECH
WRITTEN AND INTERVIEW.
ALL THE BEST FROM MY TRULY HEART 2 U ALLL DHANANAJAY DEWANGAN PEC
CHANDIGARH
……………………………………………………………………………………………………………………………………………………………
….
1) A BOX GIVEN ,,,IN BOX ONE INPUT A AND TWO OUTPUT B AND C....... WITH HTE USE
OF SIX 1OHM RESISTER ,,,WE HVE TO SHOW THE EQIVALENT RESISTANCE BETWEEN
A-B 1.2 OHM,,,,B-C-2 OHM,,,, A-C--2.2 OHM,,, 20 ONE QUESTION BASED ON TRANSIENT
THEORM OF NETWORK... BASED ON COMMUNICATION BIT N=12,,1/TS=300K,,,FIND THE
BANDWITH???
BASED ON ANALOG... OPEMP DB GAIN PROBLEM TECNICAL INTERVIEW..... BASED ON
WRITTEN...AND FOCUSED THE PART WHER U
THIS IS MAY B USEFULL FOR THOSE R SERIOUSLY PREPARE FOR FREESCALE FIST
INTRODUCTION OF COMPANY--IT IS BASICALLY MANUFATURE AND DESINING
COMPANY OF SEMICONDUCTOR CHIP AND STARTED 1N YEAR NEARLY 1968 US BASED
COMPANY....IT IS DIFFERENT FROM MOTOROLA ...BEFORE PPT I THOUGHT THAT IS A
PART OF MOTOROLA......BUT EVERY GUISE THOUGHT IT IS MOLOROLA BUT
NOT...MOTOROLA IS BIG COUSTOMER OF FREESCALE..OK IT HAVING 3 ROUND 1-TECH
WRITTEN
1) A BOX GIVEN ,,,IN BOX ONE INPUT A AND TWO OUTPUT B AND C....... WITH HTE USE
OF SIX 1OHM RESISTER ,,,WE HVE TO SHOW THE EQIVALENT RESISTANCE BETWEEN
A-B 1.2 OHM,,,,B-C-2 OHM,,,, A-C--2.2 OHM,,, 20 ONE QUESTION BASED ON TRANSIENT
THEORM OF NETWORK... BASED ON COMMUNICATION BIT N=12,,1/TS=300K,,,FIND THE
BANDWITH??? BASED ON ANALOG... OPEMP DB GAIN PROBLEM TECNICAL
INTERVIEW..... BASED ON WRITTEN...AND FOCUSED THE PART WHER U DIDN'T
PERFORM WELL.... HR ROUND... THEY ALREADY DECEIDED ACCORDING TO TECH
WRITTEN AND INTERVIEW ALL THE BEST FROM MY TRULY HEART 2 U ALLL
DHANANAJAY DEWANGAN PEC CHANDIGARH