Professional Documents
Culture Documents
HORSEPOWER
Gross:728 kW 976 HP @ 1800 rpm
Net:713 kW 956 HP @ 1800 rpm
OPERATING WEIGHT
Backhoe:200000–204120 kg
440,920–450,000 lb
Loading shovel:195000 kg
429,900 lb
PC2000-8 BACKHOE
PC2000-8 LOADING SHOVEL
PC
2000
HYDRAULIC EXCAVATOR
PC2000-8 H Y D R A U L I C E X C AVAT O R
WALK-AROUND
Safety Design
Global Standard Safety Design that Meets Safety
Standards in Japan, North America and Europe
Ecology and Economy Features
● Rugged OPG Top Guard Level 2 integrated with the
Environment-friendly Machine
cab as standard
● Komatsu SAA12V140E-3 Engine meets Tier 2
● Emergency Stop Device
emissions regulations.
● Anti-slip Plates for safe work on machine
● Eco-gauge to assist energy saving operation
● Interconnected Horn and Flashing Light
● Auto Deceleration and Auto Idling System
● Oil Splash Prevention Wall (Fire wall)
● Economy Mode two-level setting
● Duplet Rearview Mirror
See pages 4, 5.
See pages 8, 9.
2
PC2000-8_E.qxd 7/13/06 2:58 PM Page 4
HYDRAULIC EXCAVATOR
PC2000-80
HORSEPOWER
Gross:728 kW 976 HP @ 1800 rpm
Net:713 kW 956 HP @ 1800 rpm
PC2000-8 H Y D R A U L I C E X C AVAT O R
Komatsu Technology
Komatsu develops and produces all major
components, such as engines, electronics
and hydraulic components, in house.
With this “Komatsu Technology,” and adding
customer feedback, Komatsu is achieving
great advancements in technology.
To achieve both high levels of productivity and
economical performance, Komatsu has
developed the main components with a total
control system.
The result is a new generation of high
performance and environment friendly
excavators.
4
PC2000-8_E.qxd 7/13/06 2:58 PM Page 6
HYDRAULIC EXCAVATOR
PC2000-80
5
PC2000-8_E.qxd 7/13/06 2:58 PM Page 7
PC2000-8 H Y D R A U L I C E X C AVAT O R
Electronically controlled
variable speed fan
(for oil cooler) Fan pump
6
PC2000-8_E.qxd 7/13/06 2:58 PM Page 8
HYDRAULIC EXCAVATOR
PC2000-80
XS Tooth
• Unique bucket tooth shape, superior
digging performance
• Long-term high sharpness
• Great penetration performance
• Hammerless, safe, and easy tooth
replacement
(Tooth replacement time: Halves the
conventional machine.)
Koma-hard materials Ultra high-tensile strength steel High-tensile strength steel Large shroud Adapter protector
7
PC2000-8_E.qxd 7/13/06 2:58 PM Page 9
PC2000-8 H Y D R A U L I C E X C AVAT O R
SAFETY FEATURES
Spreading safety first concept into every corner of the machine
An achievement in the evolution of safe performance
Step light with timer Emergency rope for emergency Duplet rearview mirror
Provides light for 90 seconds to allow escape Offers high visibility with fewer blind
the operator to get off the machine Emergency rope is stored at the step spot in left rear field of vision.
safely. beside the cab to prepare emergency
escape.
HYDRAULIC EXCAVATOR
PC2000-80
Global Standard Safety Design Anti-slip plates Interconnected horn and flashing
that Meets Safety Standards in Anti-slip plates are installed on all light
Japan, North America and surfaces of access Allows the operator to give visual and
Europe walkways and audible notice at
Emergency stop device & fuel cut steps. They can a time to the
lever provide anti-slip dump truck
Emergency stop device is provided at performance over operator.
two points on the power module as the long term.
standard equipment. Engine start lock HID working light (optional)
function of the device assures the Oil splash prevention wall (Fire wall) HID working light with doubled
safety during maintenance work. In Prevents oil from luminance of
addition, fuel cut lever provided on the splashing into the conventional
revolving frame allows stopping the engine room halogen lamp is
engine from the ground. even if hydraulic optionally
hoses are available for safe
broken. night work.
9
PC2000-8_E.qxd 7/13/06 2:59 PM Page 11
PC2000-8 H Y D R A U L I C E X C AVAT O R
WORKING ENVIRONMENT
Planning all the equipment to minimize operator fatigue
An achievement in the evolution of comfort performance
Spacious and Comfortable Newly Designed Cab Comfortable Operating Environment with Same
Large cab designed for exclusive use in mining shovels Level of Low-noise as Passenger Cars
provides spacious foot area that gives enough space to relax Newly designed thick plate integrated and welded
during operation even for a large operator. The cab with construction cab and new cab damper mounts are adopted.
improved air tightness is pressurized to prevent dust from Combined with the power module that packages noise
entering. Combined with a large capacity twin air conditioner sources such as engine, cooling fan, hydraulic pumps, etc.,
that cools and heat the cab effectively, ample and comfortable the machine attains outstanding low noise and vibration
operating environment is realized. equivalent to passenger cars.
Spring
Comfortable Air Suspension Seat
The seat with air suspension minimizes and softens vibrations Silicon oil
HYDRAULIC EXCAVATOR
PC2000-80
11
PC2000-8_E.qxd 7/13/06 2:59 PM Page 13
PC2000-8 H Y D R A U L I C E X C AVAT O R
Maintenance function
KOMATSU
Monitor informs replacement
time of oil and filters on LCD
when the replacement interval
Internet
is reached.
Power Module for Easy Checking and Maintenance Remote Drain Piping Enable Drainage from the
Catwalk surrounding the power module and center walkway Ground
provides easy access to the inspection and maintenance Remote drain piping provided to drain hydraulic oil, PTO oil,
points. engine oil and coolant enable performing drainage works from
the ground.
10 Coolant
9
11
8 6 7
1
PTO
7 12 2
4 3
Engine oil
13
Hydraulic oil
5
12
HYDRAULIC EXCAVATOR
PC2000-80
Automatic Greasing System Large Capacity Grease Tank and Easy Cleaning of Radiator
Greasing to work equipment and Easy-to-supply Refill Piping The hydraulically driven fan can
bucket is fully automated. Since the (optional) reversed to facilitate cleaning of the
system carries out automatic greasing The machine is equipped with 200R cooling unit. In addition, this feature
at regular time intervals, greasing is large capacity grease tank enough to contributes to reducing warm-up time
in low temperatures.
hassle-free and free from worries of perform 24 hours operation. Since the
getting hands dirt with grease. optional remote refill piping enables
supplying grease to the tank from the Fuel Pre-filter
ground, there is no need for crane (with Water Separator)
operation to replace a grease drum. Removes water and contaminants from
fuel to enhance the fuel system reliability.
200R grease tank
Hydraulic filter
(Eco-white element)
13
PC2000-8_E.qxd 7/13/06 2:59 PM Page 15
PC2000-8 H Y D R A U L I C E X C AVAT O R
SPECIFICATIONS
ENGINE DRIVES AND BRAKES
Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu SAA12V140E-3 Steering control . . . . . . . . . . . . . . . . . . . . . . . Two levers with pedals
Type . . . . . . . . . . . . . . . . . . . . 4-cycle, water-cooled, direct injection Drive method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fully hydrostatic
Aspiration. . . . . . . . . . . . . . . . . . . . . . . . . Turbocharged, aftercooled Travel motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Axial piston motor
Number of cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Reduction system . . . . . . . . . . . . . . . . . . Planetary double reduction
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 mm 5.51" Maximum drawbar pull . . . . . . . . . . 1079 kN 110000 kgf 242,510 lb
Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165 mm 6.50" Gradeability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65%
Piston displacement . . . . . . . . . . . . . . . . . . . . . . . . 30.48 ltr 1860 in3 Maximum travel speed . . . . . . . . . . . . . . . . . . . . .2.7 km/h 1.7 mph
Governor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . All-speed, electronic Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic lock
Horsepower:
SAE J1995 . . . . . . . . . . . . . . . . . . . . . . . . Gross 728 kW 976 HP
ISO 9249 / SAE J1349* . . . . . . . . . . . . . . . . . Net 713 kW 956 HP UNDERCARRIAGE
Rated rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800 rpm
Fan drive type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic Center frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H-leg frame
Track frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Box-section
*Net horsepower at the maximum speed of radiator cooling fan is 679 kW 910HP.
Seal of track. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Sealed
Track adjuster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulic
No. of shoes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 each side
HYDRAULIC SYSTEM No. of carrier rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 each side
Type . . . . . . . . . . . . . . . . . . . . . . . Open-center load-sensing system No. of track rollers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 each side
Number of selectable working modes . . . . . . . . . . . . . . . . . . . . . . . 2
COOLANT AND LUBRICANT
Main pump: CAPACITY (REFILLING)
Type . . . . . . . . . . . . . . . . . . . . . . . Variable-capacity piston pumps
Pumps for. . . . . . . . Boom, arm, bucket, swing, and travel circuits Fuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . 3400 ltr 898.3 U.S. gal
Radiator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180 ltr 47.6 U.S. gal
Maximum flow: Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 ltr 31.7 U.S. gal
For implement, swing and travel . . 2317 ltr/min 612.2 U.S. gpm Final drive, each side . . . . . . . . . . . . . . . . . . . 85 ltr 22.5 U.S. gal
For drive fan . . . . . . . . . . . . . . . . . . . 324 ltr/min 85.6 U.S. gpm Swing drive . . . . . . . . . . . . . . . . . . . . . . . 30 x 2 ltr 7.9 x 2 U.S. gal
Hydraulic motors: Hydraulic tank . . . . . . . . . . . . . . . . . . . . . . 1300 ltr 343.5 U.S. gal
Travel . . . . . . . . . . . . . . 2 x axial piston motors with parking brake PTO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 ltr 7.9 U.S. gal
Swing . . . . . . . . . 2 x axial piston motors with swing holding brake
Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x axial piston motors
OPERATING WEIGHT (APPROXIMATE)
Relief valve setting:
BACKHOE
Implement circuits
Operating weight, including 8700 mm 28'7" boom, 3900 mm 12'10"
Backhoe . . . . . . . . . . . . . . . . . 29.4 MPa 300 kgf/cm 2
4,270 psi
arm, SAE heaped 12.0 m3 15.7 yd3 backhoe bucket, operator,
Loading shovel . . . . . . . . . . . . 29.4 MPa 300 kgf/cm2 4,270 psi
lubricant, coolant, full fuel tank, and the standard equipment.
Travel circuit . . . . . . . . . . . . . . . 32.9 MPa 335 kgf/cm2 4,760 psi
Swing circuit . . . . . . . . . . . . . . . 29.4 MPa 300 kgf/cm2 4,270 psi PC2000-8
Pilot circuit . . . . . . . . . . . . . . . . . . 2.9 MPa 30 kgf/cm2 430 psi
Operating Ground
Hydraulic cylinders: Shoes Weight Pressure
Number of cylinders—bore x stroke Double grouser 188 kPa
200000 kg
810 mm 1.92 kgf/cm2
Backhoe 440,920 lb
32" 27.3 psi
Boom. . . . . . . . . . . . . . . . 2 – 300 mm x 2647 mm 11.8" x 104.2"
Arm . . . . . . . . . . . . . . . . . 2 – 250 mm x 2138 mm 9.8" x 84.2" Triple grouser 154 kPa
204120 kg
1010 mm 1.57 kgf/cm2
Bucket . . . . . . . . . . . . . . . 2 – 200 mm x 2170 mm 7.9" x 85.4" 450,000 lb
40" 22.3 psi
Loading shovel
Boom. . . . . . . . . . . . . . . . 2 – 280 mm x 1930 mm 11.6" x 76.0" LOADING SHOVEL
Arm . . . . . . . . . . . . . . . . . 2 – 200 mm x 2170 mm 7.9" x 85.4" Operating weight, including 5950 mm 19'6" boom, 4450 mm 14'7"
Bucket . . . . . . . . . . . . . . . 2 – 225 mm x 2050 mm 8.9" x 80.7" arm, 11.0 m3 14.4 yd3 heaped bucket, operator, lubricants, coolant,
Bottom dump. . . . . . . . . . 2 – 180 mm x 600 mm 7.1" x 23.1" full fuel tank and standard equipment.
PC2000-8
SWING SYSTEM Shoes Operating Weight Ground Pressure
Double grouser 195000 kg 183 kPa
Driven by. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x hydraulic motors
810 mm 1.87 kg/cm2
Swing reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Planetary gear 429,900 lb
32" 26.6 psi
Swing circle lubrication . . . . . . . . . . . . . . . . . . . . . . . Grease-bathed
Swing lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Oil disc brake
Swing speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.8 rpm
14
HYDRAULIC EXCAVATOR
PC2000-80
BACKHOE DIMENSIONS
Unit: mm ft in
7030 23’1"
6605 21’8"
5970 19’7"
4635 15’2"
6’10"
2095
0.9"
2’8"
825
23
5780 19’0" 810 32"
7445 24’5" 4600 15’1"
5410 17’9"
5650 18’6"
6240 20’6"
WORKING RANGE
G
16 8.7 m 28'7" boom
15
14 3.9 m 12'10" arm
13 A Max. digging height 13410 mm 44'0"
12
11 B Max. dumping height 8650 mm 28'5"
10 C Max. digging depth 9235 mm 30'4"
9
8 D Max. vertical wall
2710 mm 8'11"
A 7 digging depth
11880
6
E Max. digging depth
5 9115 mm 29'9"
B of cut for 8' level
4
3 F Max. digging reach 15780 mm 51'9"
2
G Max. digging reach
1 15305 mm 50'3"
0
at ground level
17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
D
1 H Min. swing radius 7500 mm 24'7"
2
3 626 kN
Bucket digging force (SAE)
4 63.8 ton / 70.3 U.S. ton
C 5 574 kN
6 Arm crowd force (SAE)
58.5 ton / 64.5 U.S. ton
7
8 697 kN
Bucket digging force (ISO)
9 71.1 ton / 78.4 U.S. ton
10
586 kN
11 Arm crowd force (ISO)
E 59.8 ton / 65.9 U.S. ton
F
These charts are based on over-side stability with fully loaded bucket at maximum reach.
嘷: General purpose use, density up to 2.1 t/m3 3,500 lb/yd3 □: General purpose use, density up to 1.8 t/m3 3,000 lb/yd3
䊱: General purpose use, density up to 1.5 t/m3 2,500 lb/yd3 —: Not useable
*: Wear-resistant bucket **: Narrow wear-resistant bucket
15
LOADING SHOVEL DIMENSIONS
Unit: mm ft in
7435 24’5"
7030 23’1"
6605 21’8"
5970 19’7"
4635 15’2"
6’10"
2095
2’8"
0.9"
5780 19’ 810 32"
23
825
7445 24’5" 4600 15’1"
5410 17’9"
5625 18’6"
6240 20’6"
Working Range
15
14 Type of bucket Bottom dump
13 Capacity–heaped 11.0 m3 14.4 yd3
12 A Max. cutting height 14450 mm 47'5"
11 B Max. dumping height 9665 mm 31'9"
10 C Max. digging depth 3190 mm 10'6"
9 D Max. digging reach 13170 mm 43'3"
8
E Max. digging reach at ground level 11940 mm 39'2"
A 7
F Level crowding distance 4850 mm 15'11"
6
G Min. crowd distance 7090 mm 23'3"
B 5
4 721 kN
Bucket digging force
73.5 ton / 81.0 U.S. ton
3
755 kN
2 Arm crowd force
77.0 ton / 84.9 U.S. ton
1
0
14 13 12 11 10 9 8 7 6 5 4 3 2 1
1 Bucket Selection
C 2 Type of bucket Bottom dump
3
Capacity–heaped 11.0 m3 14.4 yd3
4
Width (with side shrouds) 3220 mm 127"
F G Weight 14400 kg 31,750 lb
E No. of bucket teeth 6
General-purpose
D Recommended uses
digging and loading
16
LIFTING CAPACITY
A
PC2000-8
Equipment: A: Reach from swing center
● Boom: 8.7 m 28'7" B: Bucket hook height
● Arm: 3.9 m 12'10" C: Lifting capacity
B ● Bucket: 12.0 m3 15.5 yd3 Cf: Rating over front
● Bucket weight: 12400 kg 27340 lb Cs: Rating over side
C ● Track shoe width: 810 mm 32" : Rating at maximum reach
A Maximum 10.7 m 35' 9.1 m 30' 7.6 m 25' 6.1 m 20' 4.6 m 15' 3.0 m 10'
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.6 m *21070 *21070 *31450 *31450
25' *46,400 *46,400 *69,300 *69,300
6.1 m *21960 *21960 *33360 *33360 *38650 *38650 *46690 *46690
20' *48,400 *48,400 *73,500 *73,500 *85,200 *85,200 *102,900 *102,900
4.6 m *23390 *23390 *35390 *35390 *41980 *41980 *52180 *52180
15' *51,500 *51,500 *78,000 *78,000 *92,500 *92,500 *115,000 *115,000
3.0 m *25480 24100 *37160 36040 *44830 *44830 *56560 *56560
10' *56,100 53,100 *81,900 79,400 *98,800 *98,800 *124,700 *124,700
1.5 m *23460 24150 *38310 34630 *46670 44910 *59040 *59040 *61140 *61140
5' *62,700 53,200 *84,400 76,300 *102,900 99,000 *130,100 *130,100 *134,800 *134,800
0m *29810 25040 *38480 33620 *47160 43460 *59380 58650 *68850 *68850
0' *65,700 55,200 *84,800 74,100 *103,900 95,800 *130,900 129,300 *151,800 *151,800
-1.5 m *30230 27000 *37220 33110 *45970 42730 *57530 *57530 *73490 *73490 *48790 *48790 *33670 *33670
-5' *66,600 59,500 *82,000 73,000 *101,300 94,200 *126,800 *126,800 *162,000 *162,000 *107,500 *107,500 *74,200 *74,200
-3.0 m *30370 *30370 *33720 33210 *42640 *42640 *53280 *53280 *67010 *67010 *68230 *68230 *50170 *50170
-10' *66,900 *66,900 *74,300 73,200 *94,000 *94,000 *117,400 *117,400 *147,700 *147,700 *150,400 *150,400 *110,600 *110,600
-4.6 m *29730 *29730 *36030 *36030 *45860 *45860 *57180 *57180 *70860 *70860 *69480 *69480
-15' *65,500 *65,500 *79,400 *79,400 *101,100 *101,100 *126,000 *126,000 *156,200 *156,200 *153,200 *153,200
-6.1 m *26990 *26990 *33170 *33170 *42220 *42220 *50780 *50780
-20' *59,500 *59,500 *73,100 *73,100 *93,000 *93,000 *111,900 *111,900
* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE standard No. J/ISO10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
A
PC2000-8
Equipment: A: Reach from swing center
● Boom: 8.7 m 28'7" B: Bucket hook height
● Arm: 3.9 m 12'10" C: Lifting capacity
B ● Bucket: 12.0 m3 15.5 yd3 Cf: Rating over front
● Bucket weight: 12400 kg 27340 lb Cs: Rating over side
C
● Track shoe width: 810 mm 32" : Rating at maximum reach
A Maximum 10.7 m 35' 9.1 m 30' 7.6 m 25' 6.1 m 20' 4.6 m 15' 3.0 m 10'
B Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs Cf Cs
7.6 m *23910 *23910 *36140 *36140
25' *52,700 *52,700 *79,600 *79,600
6.1 m *24870 *24870 *38350 *38350 *44140 *44140 *52970 *52970
20' *54,800 *54,800 *84,500 *84,500 *97,300 *97,300 *116,700 *116,700
4.6 m *26430 24820 *40710 37720 *48000 *48000 *59330 *59330
15' *58,200 54,700 *89,700 83,100 *105,800 *105,800 *130,800 *130,800
3.0 m *28700 24100 *42790 36040 *51320 47040 *64430 63630
10' *63,200 53,100 *94,300 79,400 *113,100 103,700 *142,000 140,300
1.5 m *31950 24150 *44160 34630 *53500 44910 *67370 60510 *62870 *62870
5' *70,400 53,200 *97,300 76,300 *117,900 99,000 *148,500 133,400 *138,600 *138,600
0m *34110 25040 *44420 33620 *54150 43460 *67880 58650 *62430 *62430
0' *75,220 55,200 *97,900 74,100 *119,400 95,800 *149,600 129,300 *137,600 *137,600
-1.5 m *35290 27000 *43090 33110 *52920 42730 *65930 57860 *62960 *62960 *54140 *54140 *37650 *37650
-5' *77,800 59,500 *95,000 73,000 *116,600 94,200 *145,300 127,500 *138,800 *138,800 *119,300 *119,300 *83,000 *83,000
-3.0 m *35530 30600 *39270 33210 *49280 42700 *61280 57970 *64660 *64660 *61520 *61520 *55650 *55650
-10' *78,300 67,400 *86,500 73,200 *108,600 94,100 *135,100 127,800 *142,500 *142,500 *135,600 *135,600 *122,700 *122,700
-4.6 m *34950 *34950 *42010 *42010 *53120 *53120 *66020 *66020 *62200 *62200 *61980 *61980
-15' *77,000 *77,000 *92,600 *92,600 *117,100 *117,100 *145,500 *145,500 *137,100 *137,100 *136,600 *136,600
-6.1 m *32150 *32150 *39130 *39130 *49520 *49520 *59670 *59670
-20' *70,800 *70,800 *86,200 *86,200 *109,100 *109,100 *131,500 *131,500
* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE standard No. J/ISO10567. Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
17
PC2000-8_E.qxd 7/13/06 2:59 PM Page 19
TRANSPORTATION GUIDE
Length mm ft.in 2885 9'6" 3660 12'0" 7575 24'10" 5215 17'1" 3100 10'2"
Width mm ft.in 1880 6'2" 630 2'1" 3180 10'5" 2455 8'1" 875 2'10"
Height mm ft.in 2520 8'3" 2505 8'3" 2640 8'8" 3195 10'6" 2070 6'10"
Weight t U.S. ton 1.8 1.98 2.0 2.2 26.5 29.2 16.1 17.7 2.4 2.65
Length mm ft.in 6420 21'1" 3815 12'6" 7435 24'5" 1860 6'1"
Width mm ft.in 1115 3'8" 3190 10'6" 1720 5'8" 1115 3'8"
Height mm ft.in 1505 4'11" 2210 7'3" 1920 6'4" 2125 7'0"
Weight t U.S. ton 24.5 27.0 18.0 19'8" 26.0 x 2 28.65 x 2 3.5 3.86
Others
Catwark, step, handrail, small removed parts, etc.
18
STANDARD EQUIPMENT
OPTIONAL EQUIPMENT
19
PC2000-8_E.qxd 7/13/06 2:58 PM Page 1