Professional Documents
Culture Documents
1. PURLIN
2. SIDE RUNNER
3. WALKWAY RUNNER
4. CONVEYOR POST SUPPORTING RUNNER
I) DESIGN OF PURLINS
1) DEAD LOAD
UDL due to wt of roof sheet + purlins = 28.75 kg/m
UDL due to self wt of purlins = 13.1 kg/m
Total UDL due to DL = 41.85 kg/m
2) LIVE LOAD
UDL due to dust on roof = 115 kg/m
UDL due to maintenance = 66.7 kg/m
Total UDL due to LL = 181.7 kg/m
3) WIND LOAD
(Absolute) Cpe = 0.7
(Absolute) Cpi = 0.5
Wind pressure = 1160 N/m2
UDL on purlin due to wind = 163.19 kg/m
4) AXIAL LOAD 0 KG
Axial load on MC 0 KG
CASE 1 : DL +LL
UDL per purlin due to DL + LL = 223.55 kg/m
(This load acts vertically downwards on the purlin)
Resolving the above load,
Normal Component : 212.09 kg/m
Tangential Component : 70.68 kg/m
Length of Purlin mm 6m
MC100 D= 125 Tf= 8.2
t w= 5.3 d1= 108.6
D/T= 15.2439 d1/t= 20.49057
ryy= 19.1 L/ryy= 314
Area A = 1670
Permissible Bending Stress about major axis 1650 kg/cm^2 Table 6.1B IS800
Permissible Bending Stress about minor axis 1650 kg/cm^2
Permissble Axal strength 800 kg/cm^2
Stress Ratio= 2.3900
> 1 NOT OK
CASE 2 : DL + WL
UDL per purlin due to WL = 163.19 kg/m
(This load acts upwards & normal to the purlin)
UDL due to DL = 41.85 kg/m
(This load acts vertically downwards on the purlin)
Resolving the above load,
Normal Component : 39.71 kg/m
Tangential Component : 13.24 kg/m
1) DEAD LOAD
UDL due to wt of side sheet = 25.625 kg/m
UDL due to self wt of runner = 7.14 kg/m
Total UDL due to DL = 32.765 kg/m
2) WIND LOAD
(Absolute) Cpe = 0.70
(Absolute) Cpi = 0.50
Wind pressure = 1160 N/m2
UDL on runner due to wind = 145.45 kg/m
Provide ISMC 75
ISMC75 : Section Modulus (cm3)
Zy
4.81
1) DEAD LOAD
UDL due to wt of cheq'd plate = 27.5 kg/m
UDL due to self wt of runner = 9.2 kg/m
for connection 10%selfweight 19 kg/m
Total UDL due to DL = 55.7 kg/m
2) LIVE LOAD
UDL due to live load on walkway = 150 kg/m
Dust load 50 kg/m
Net UDL due to DL & LL = 255.7 kg/m
Member Property :
MC125 D= 125 T= 8.2
t= 5.3 d1= 108.6
D/T= 15.2439 d1/t= 20.49057
ryy= 14.8 L/ryy= 203
Area StressA about major
Permissible Bending = 1220
axis 1080 kg/cm^2 Table 6.1B IS800
Stress Ratio= 0.55 OK
Provide MC125
dulus (cm3)