Professional Documents
Culture Documents
BluetoothStereo
must be fully charged prior to use. Charging time is approximately 2 hrs.
9 Your headphones cannot be used while charging.
Via AC Adapter
A
Wall Charger
2 Using the provided
HD Voice Ready Micro USB cable,
Built-in Microphone connect the headphones B
4 (Micro USB port)
to the AC Adapter
(USB port).
7 5 B Via Computer
A
Using the provided Micro
1. Volume Down 8 6 USB cable, connect the
1 headphones to the computer
2. Volume Up 3 or laptop (USB port).
3. Previous
4. Next PAIRING THE HEADPHONES TO BLUETOOTH DEVICE
5. Power / Multi-functional Make sure the Bluetooth function is available on your cell phone.
ON/OFF, Call Answer, Redial PACKAGE CONTENTS Specific pairing procedures will be different depending on
Hang Up, Play/Pause different cell phone. For detailed information, please refer to
• Bluetooth Headphones your cell phone’s User Guide.
6. Built-in Microphone
• Micro USB cable • If no device connection is made within 10 minutes of the headphones
7. Charge being switched on, the headphones will automatically be switched
• AUX line-in cable
8. Line-in off to save power.
9. Indicator • After a successful pairing devices will memorize each. Therefore,
User Guide Light no pairing will be needed next time.
over
1 2
SPECIFICATIONS
first close the current Bluetooth connection.
When needed, adjust the volume by pressing the keys (up) Distance Up to 33ft (10m)
2. Follow the above steps (under PAIRING TO BLUETOOTH DEVICE)
or (down) during a call or when listening to music. Battery Rechargeable lithium battery: 300mAh
to pair your earbuds to another Bluetooth device.
Frequency 160HZ-20KZH
FAQ’s Standby Time Up to 30 hours
LINE-IN USE Charging Time 2 hours
Q: Why can’t I turn the headset on? Play Time up to 8 hours
You have an option to use these headphones via line-in. Make sure Talk Time up to 10 hours
A: Make sure your device is fully charged before using it for the first
your headphones are charged for line-in use. Input DC: +5.0±0.25VA
time. Your device can not be turned on if battery level is very low.
Refer to Charging the headphones section of the manual. 1. Turn ON the headphones by pressing the power/multifunction
button .
Q: There is no sound during playback. tzumi® BT STEREO HEADPHONES Distributed by tzumi® INC. NY, NY 10016
2. Use the standard 3.5mm auxiliary cord to connect the headphones ©Copyright 2015 tzumi® All Rights Reserved. Made In China.
A: Check the connection between your device with phone or to your device.
computer. If the connection is not established, please reconnect The Bluetooth trademarks are owned by Bluetooth SIG, Inc. Other trademarks and trade names
in this document are those of their respective owners. © 2015 Bluetooth SIG, Inc. Subject to
again. And adjust the volume level to a suitable level. change without prior notice.
3 4