Professional Documents
Culture Documents
Our Vision:
To develop the institution into a world class destination for technological education and
research.
Our Mission:
To impart high quality, industry relevant, career oriented, engineering education to rural
students, to translate our vision into a reality.
To provide the best of instructional and institutional infrastructure facilities.
To have strategic linkages with industry and other institutions.
To mould students to meet the challenges of life with ethics, courage and conviction.
SRINIVASA INSTITUTE OF ENGINEERING & TECHNOLOGY
(Approved by AICTE, New Delhi, Permanently affiliated to JNTUK, Kakinada)
(An ISO 9001:2015 Certified Institute, Accredited by NAAC with ‘A’ Grade)
NH-216, Amalapuram-Kakinada Highway, Cheyyeru (V), AMALAPURAM, E.G.Dt.-533216
Department Vision:
Department Mission:
Imparting quality education to the students and enhancing their skills to make them
globally competitive mechanical engineers.
Maintaining vital, state-of-the-art research facilities to provide its students and faculty
with opportunities to create, interpret, apply and disseminate knowledge.
To develop linkages with world class R&D organizations and educational institutions in
India and abroad for excellence in teaching, research and consultancy practices
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY: KAKINADA
KAKINADA - 533 003, Andhra Pradesh, India
DESIGN OF MACHINE MEMBERS – I
UNIT – I
INTRODUCTION: General considerations in the design of Engineering Materials and their
properties – selection –Manufacturing consideration in design, tolerances and fits –BIS codes of
steels.
UNIT – II
STRENGTH OF MACHINE ELEMENTS: Stress concentration – theoretical stress
concentration factor – fatigue stress concentration factor notch sensitivity – design for fluctuating
stresses – endurance limit – estimation of endurance strength – goodman’s line – soderberg’s line
– modified goodman’s line.
UNIT – III
Riveted and welded joints – design of joints with initial stresses – eccentric loading. Bolted joints
– design of bolts with pre-stresses – design of joints under eccentric loading – locking devices –
both of uniform strength, different seals.
UNIT – IV
KEYS, COTTERS AND KNUCKLE JOINTS: Design of keys-stresses in keys-cotter joints-
spigot and socket, sleeve and cotter, jib and cotter joints knuckle joints.
SHAFTS: Design of solid and hollow shafts for strength and rigidity – design of shafts for
combined bending and axial loads – shaft sizes – BIS code. Use of internal and external circlips,
gaskets and seals (stationary &rotary).
UNIT – V
SHAFT COUPLING: Rigid couplings – muff, split muff and flange couplings, flexible
couplings – flange coupling (modified).
UNIT – VI
MECHANICAL SPRINGS:
Stresses and deflections of helical springs – extension -compression springs – springs for fatigue
loading, energy storage capacity – helical torsion springs – co-axial springs, leaf springs.
TEXT BOOKS:
1. Machine Design, V.Bandari, TMH Publishers
2. Machine design – Pandya & Shah
3. Machine Design PSG Data hand book
REFERENCES:
1. Design of Machine Elements / V.M. Faires
2. Machine design / Schaum Series.
3. Data books (1) PSG College of technology (2) Mahadevan
SRINIVASA INSTITUTE OF ENGINEERING & TECHNOLOGY
(Approved by AICTE, New Delhi, Permanently affiliated to JNTUK, Kakinada)
(An ISO 9001:2015 Certified Institute, Accredited by NAAC with ‘A’ Grade)
NH-216, Amalapuram-Kakinada Highway, Cheyyeru (V), AMALAPURAM, E.G.Dt.-533216
PEO-1: To enable the students learn the fundamentals of mechanical engineering very conceptually
so that they can continuously update themselves in the context of growing technology
PEO-2: To make the program rich in core subjects so that the graduates in and Mechanical
Engineering can fit themselves in any relevant industry (or) pursue higher learning
PEO -3: Achieve personal and professional success with awareness and commitment to their ethical
and social responsibilities
PO-1: Take up any job either in the core industry (or) in allied disciplines
PO-2: Fit to write any competitive examinations for getting selected either for M.S. program (or) to
undertake relevant career at a high end
PO-3: Develop communication and leadership skills so that the candidates in their future become
leaders in the industry & academia
SRINIVASA INSTITUTE OF ENGINEERING & TECHNOLOGY
(Approved by AICTE, New Delhi, Permanently affiliated to JNTUK, Kakinada)
(An ISO 9001:2015 Certified Institute, Accredited by NAAC with ‘A’ Grade)
NH-216, Amalapuram-Kakinada Highway, Cheyyeru (V), AMALAPURAM, E.G.Dt.-533216
PSO2: An ability to design and conduct experiments, as well as to analyze and interpret data.
PSO7: An ability to communicate effectively with written, oral, and visual means
SRINIVASA INSTITUTE OF ENGINEERING & TECHNOLOGY
(Approved by AICTE, New Delhi, Permanently affiliated to JNTUK, Kakinada)
(An ISO 9001:2015 Certified Institute, Accredited by NAAC with ‘A’ Grade)
NH-216, Amalapuram-Kakinada Highway, Cheyyeru (V), AMALAPURAM, E.G.Dt.-533216
COURSE OBJECTIVES:
1. The student shall gain appreciation and understanding of the design function in mechanical
engineering, the steps involved in designing and the relation of design activity with
manufacturing activity.
2. Applying the concept of stress concentration and select optimum design size for various
machine elements under fatigue load condition.
3. Understanding need for joints and their application in different fields. Design procedure for
the different joints such as welded, riveted & bolted. Learn and understanding of the
different types of failure modes and criteria.
4. Design Procedure for the different machine elements such as , shafts, keys, axially loaded
joints etc.
5. Selection of proper materials to different Couplings based on their physical and mechanical
properties.
6. Design and formulate energy storage in springs under static and fatigue load conditions.
COURSE OUTCOMES:
CO4: Analyze the stresses developed in the keys and shafts. Capable to analyze bending
moment diagrams in shafts and solve problems with variation of various parameters.
CO-PO mapping
COURSE OUTCOMES:
CO1: Explore the student’s understanding of properties of different materials and design
procedure for elements. ( taxonomy level : knowledge )
CO3: Design welded joints and riveted joints under different load conditions. ( taxonomy level :
Evaluation )
CO4: Analyze the stresses developed in the keys and shafts. Capable to analyze bending
moment diagrams in shafts and solve problems with variation of various parameters. ( taxonomy
level : Analysis )
CO5: Classify and design the different types of couplings. ( taxonomy level : Evaluation )
PROGRAM OUTCOMES:
PO5: Modern tool usage: Create, select, and apply appropriate techniques, resources, and
modern engineering and IT tools including prediction and modelling to complex engineering
activities with an understanding of the limitations.
PO6: The engineer and society: Apply reasoning informed by the contextual knowledge to
assess societal, health, safety, legal and cultural issues and the consequent responsibilities
relevant to the professional engineering practice.
PO7: Environment and sustainability: Understand the impact of the professional engineering
solutions in societal and environmental contexts, and demonstrate the knowledge of, and need
for sustainable development
PO8: Ethics: Apply ethical principles and commit to professional ethics and responsibilities and
norms of the engineering practice
PO9: Individual and team work: Function effectively as an individual, and as a member or
leader in diverse teams, and in multidisciplinary settings
PO11: Project management and finance: Demonstrate knowledge and understanding of the
engineering and management principles and apply these to one’s own work, as a member and
leader in a team, to manage projects and in multidisciplinary environments.
PO12: Life-long learning: Recognize the need for, and have the preparation and ability to
engage in independent and life-long learning in the broadest context of technological change
Course Program Description
Outcome Outcome
CO1 PO1 PO1:Understand the basic concepts of
design of machine members-I