Professional Documents
Culture Documents
1
7. As per SNT-TC-1A 2006 the term NDT applies not to
a. Material Inspection
b. Flaw detection
c. Pdm
d. all
e. None
8. Qualification means
a. Education, Knowledge and Experience
b. Education , training and experience
c. both
d. None
11. How Many NDT Methods are specified in As per SNT-TC-1A 2006
a. 10
b. 11
c. 12
d. 13
12. MFL is
a. Separate Method
b. Limited technique in Electromagnetic testing
c. Limited technique in Magnetic particle testing
d. None
2
14. Who has to establish written practice
a. Employer
b. LEVEL III
c. Jurisdictional code
d. ASME Standard
18. Who has to do actual administration and grading of Level III exam
a. LEVEL III
b. Qualified representative NDT LEVEL III
c. Qualified representative of the employer
d. All
e. None
3
21. An employer purchase an Outside LEVL III Agency Services. Then who
is responsible for the outside agency services are in accordance with
the written practice of the employer
a. Employer of the out side Agency
b. Level III of the outside agency
c. Employee of the outside agency
d. All
e. None
22. How Many Limited certification Techniques are in the Electro magnetic
testing
a. 1
b. 2
c. 3
d. 4
e. None
23. How Many Limited certification Techniques are in the Leak testing
a. 1
b. 2
c. 3
d. 4
e. None
24. As per SNT-TC-1A 2006 , a man doing the UT B Scan Can be qualified &
Certified
a) Yes By the Limited Certification
b) Yes after getting prior permission from ASNT
c) Whether any NDT personnel should be qualified and certified depends
solely upon the need of the employer and the need of the employer’s
customer or clients
d) No, Cannot be qualified as it is not covered in SNT-TC-1A -2006
4
26. SNT-TC-1A 2006 how many specimens are needed for LEVEL II
Practical
a. One good specimen
b. One flawed specimen
c. At least one flawed specimen
d. At least one good specimen
30. May an employer deviate from the guideline given in SNT-TC-1A to meet
his specific need?
a. Yes, employer shall modify the guidelines to meet his needs, since it is
recognized that these guidelines may not be appropriate for certain
employer’s Circumstances or applications.
b. No, these guidelines shall be strictly followed
c. Yes, certain employers are permitted to deviate from the guidelines
d. None of the above
5
32. To which of the following NDT methods is SNT-TC-1A currently
applicable.
a. Thermography
b. Vibration analysis
c. Laser Testing
d. All of the above
33. May a Level I person who has been certified in accordance with SNT-TC-
1A 2006 , be permitted to evaluate and sign for final acceptance of NDE
examination
a. No, as per SNT-Tc-1A the NDT Level I is required to perform that test
only and is not supposed evaluate the test results
b. Yes, a Level III person may delegate the powers to Level I for
evaluation of test results.
c. Yes, the intent in SNT-TC-1A is that the Level I person may perform the
above function provided they are in accordance with written
procedures and so documented in the employers written practice
d. Both b and c
34. Should personnel that operate optical fibroscope for visual examination
be qualified and certified?
a. Yes, because SNT-TC-1A required that all personnel performing NDT
be qualified and certified
b. No, because SNT-TC-1A does not cover that specific operation
c. Whether any NDT personnel should be qualified and certified depends
solely upon the need of the employer and the need of the employer’s
customer or clients
d. Only if required by specific codes and standard
6
36. In accordance with which of the SNT-TC-1A 2006 following is true for a
Level III
a. On the basis of demonstrated ability, achievement, experience and
education. The employer may waive examination for the Level III
individual
b. The employer may delete the specific examination if the candidate has
a valid ASNT NDT Level III certificate in the method and if documented
evidence of experience exists.
c. The employer shall recognize only the ASNT Level III certificate holder
d. All of the above
7
40. In preparing for qualification, the training times recommended for Level
I in Magnetic Particle Testing are greater than Level II, why?
a. Some NDT methods require more initial training at Level I because of
difference in complexity and manipulative skills.
b. Candidates for Level I generally have less formal education than those
for Level II
c. No, the candidate should always receive more training for Level II
regardless of NDT method.
d. Both a and b
8
44. In accordance with SNT-TC-1A 2006 which of the following statements is
not true?
a. An NDT Level III shall be responsible for the administration and
grading of examinations for NDT Level I and II personnel
b. The administration and grading of examination may b delegated to a
designated representative of NDT Level III and so recorded.
c. For a Level I and Level III personnel a composite grade shall be
determined by simple averaging of general, specific and practical
examination results.
d. All of the above
45. As per SNT-TC-1A is it intended that an employer may use level III
individuals in his direct employment and also use an outside agency for
Level III services?
a. No, an employer may use only agency at a time.
b. Yes both the above and this situation may be used under
circumstances as described in the employers’ written practice
c. Employer utilizing outside agency must not have a level III in his direct
employment
d. ASNT does not permit the use of an outside agency
9
49. A man has finished Fifth Standard Only .Can he Be qualified to LEVEL I
a. Yes
b. No
c. If NDT LEVEL III Approves , it is OK
d. Yes If so mentioned in Written Practice
50. A Man with Eng Degree was Initially quailed as ET LEVEL II. Now he
wants to be qualified LEVEL II in Remote field . So how much minimum
training hours he has to meet as per SNT-TC-1A 2006 ?
a. 40 hours
b. 30hoours
c. 20 hours
d. 16 hours
51. A Man with Eng Degree was Initially quailed as ET LEVEL II. Now he
wants to be qualified in Remote field . So how much minimum
experience he is supposed to have in that method SNT-TC-1A 2006?
a. 1000 hours
b. 12000hours
c. 600 hours
d. 315 hours
e. All
10
55. Which of the following NDT Levels should be qualified to set up and
calibrate equipment and to interpret and evaluate results with respect to
applicable codes, standards and specifications?
a. Level I
b. Level II
c. Level III
d. Level II and Level III
56. Which of the following statements is false with respect to the Written
Practice?
a. The employer shall establish a written practice.
b. The written practice should describe levels of responsibility.
c. The written practice shall be submitted to clients for acceptability.
d. The written practice shall be maintained on file.
57. When carrying out practical examination at NDT Level III how many
check points are necessary to confirm an understanding of NDT
variables and the employers procedural requirements?
a. One
b. None
c. Ten
d. Two
11
61. Initial experience may be gained simultaneously in two or more
methods if the candidate spends a minimum of ??? of work time on
each method for which certification is sought.
a. 20%
b. 25%
c. 33%
d. 50%
62. A Man with Eng Degree was initially quailed as ET LEVEL II. Now he
wants to be qualified in Remote field. So how much experience he is
supposed to have in that method SNT-TC-1A 2006?
a. 1000 hours
b. 12000hours
c. 500 hours
d. 315 hours
e. All
63. For radiographic interpretation LEVEL I, what is training hours for Non
Radiographer as per SNT-TC-1A- 2006
a. 18 hours
b. 22 hours
c. 40 hours
d. None
64. For radiographic interpretation LEVEL II, what is training hours for Non
Radiographer as per SNT-TC-1A-2006
a. 18 hours
b. 22 hours
c. 40 hours
d. None
65. For radiographic interpretation LEVEL II, what is training hours for
LEVEL I Radiographer as per SNT-TC-1A-2006
a. 18 hours
b. 2 hours
c. 40 hours
d. None
66. For RT LEVEL I to become RFI LEVEL II how Much Experience in film
viewing is needed
a. 2100 hours, and 100 films
b. 1000 films and 1000 hours
c. 1000 films and 22hours
d. 22 hours
12
67. To become RFI LEVEL II
a. Only Training hours is the criteria
b. Both training hours and the number of films viewed are the criteria
c. Both training hours and the number of films viewed in each casting,
welding and artifacts are the criteria
d. Training hours and experience are the criteria
13
2006 –SNT-TC-1A
11. In SNT-TC-1A a person having ASNT Level III certificate can work
as a Level III because this exam takes care of specific [T/F]
examination.
12. SNT-TC-1A calls for General, Specific and Practical exam for
[T/F]
Level III.
13. The training hours required for BLT are more than MSLT. [T/F]
14
17. As per SNT-TC-1A, NDT instructor should be Level III man. [T/F]
21. A squint eyed in one eye man can be okeyed as per SNT-TC-1A, if
[T/F]
he satisfies all the other requirements of vision.
27. As per SNT-TC-1A 2001 NDT Vision requirements do not include exam
[T/F]
on the shades of gray. Only color contrasting differentiation is essential.
15
MODEL EXAMINATION SNT-TC-1A- 2006
16