Professional Documents
Culture Documents
TM-505/510
Toolmaker‘s Microscopes
XY Table Travel
4"(100mm)
2"(50mm)
Reticles (optional)
TM-510
Eyepiece protractor
Dimensions
Unit: Inch (Metric)
TM-505 TM-510
15.39" (391)
15.39" (391)
2
TM-505/510
TM-505/510
FEATURES
• The eyepiece section of the optical tube incorporates
a vernier protractor. Angle measurement is performed
easily by turning the protractor to align the cross-hair
reticle with the workpiece image.
XY Table Travel • Complete selection of interchangeable reticles.
2"
(50mm) • Both transmitted and reflected illumination intensity
2"
(50mm)
can be adjusted to obtain optimal illumination
intensity for the workpiece.
• Two XY stages with different travel ranges,
TM-505 2"x 2" (50mmx50mm) and 4"x 2" (100mmx50mm),
are available.
• The TM-505/510 can output XY coordinate data
with optional Digimatic Micrometer Heads. Highly
efficient two-dimensional data processing is available
by connecting the Digimatic Micrometer Heads to
an SPC tool.
SPECIFICATIONS
Optical tube • Monocular with 30º depression angle
• 90º broken cross-hair reticle (176-126)
• Erect image
• Diopter adjustable
MODEL SELECTION Eyepiece protractor • Graduation: 1º
Microscope Model TM-505 TM-510 • Protractor range: 360º
• Minimum reading by vernier: 6'
Order No.
Eyepiece (176-116) • Magnification: 15X
without micrometer heads 176-811A 176-812A • Field number: 13
with micrometer heads 176-808A 176-809A Objective (176-138) • Magnification: 2X
164-164 (X2) • Working distance: 2.638" (67mm)
Measuring unit Optional Optional • Numerical aperture: 0.07
XY table travel 2"x2" (50x50mm)* 4"x2" (100x50mm)* Total magnification • 30X
Table top dimensions 5.98"x5.98" 9.45"x5.98" Transmitted illumination • Light source: tungsten bulb (24V, 2W)
(152x152mm) (240x152mm) • GIF (green) filter
Effective area 3.78"x3.78" 5.91"x3.62" • Light intensity adjustable
of glass stage (96x96mm) (150x92mm) Reflected illumination • Oblique single-bulb illuminator
Maximum • Optional twin-bulb illuminator (176-203)
workpiece load 11 lbs. (5kg) 11 lbs. (5kg) • Light source: tungsten bulb (24V, 2W)
• Light intensity adjustable
Maximum
workpiece height 4.53" (115mm) 4.21" (107mm) Power supply 100/110/120/220/240V AC, 50/60Hz
Power consumption 100VA
*If the stroke of the stage exceeds the measuring range of the micrometer head, use the optional
gage block. Mass TM-505: Approx. 30.8 lbs. (14kg)
TM-510: Approx. 33 lbs. (15kg)
3
Optional Accessories
Eyepieces Objectives
176-138
176-137
Magnification 10X 15X 20X Magnification 2X 5X 10X
Order No. 176-115 176-116* 176-117 Order No. 176-138* 176-139 176-137
Field number 13 13 10 Numerical 0.07 0.10 0.14
*Standard accessory
aperture
Working 2.638" 1.299" .551"
distance (67mm) (33mm) (14mm)
*Standard accessory
Digital Camera
64PMI189
4
Versatile
Versatile
Reticles
176-109 Metric coarse thread (P=0.25 - 1.0)
176-110 Metric coarse thread (P= 1.25 - 2.0)
176-140 ISO metric coarse thread (P= 0.075-0.7)
176-141 ISO metric coarse thread (P= 0.75-2) 176-109 176-110 176-140 176-141
176-142 ISO unified thread (80-28 TPI)
176-143 ISO unified thread (24-14 TPI)
176-144 ISO unified thread (13-10 TPI)
176-123 Unified screw thread (80-28 TPI)
176-124 Unified screw thread (24-14 TPI) 176-142 176-143 176-144 176-123
5
Optional Accessories
indicator to the microscope for • The light intensity can be adjusted as desired.
176-204
height measurement.
• Allows extended height Workpiece Clip
measurements using the optional gage block.
• Stem fitting hole: Ø.375" (Ø8mm with • Can be mounted on the
bushing) T-groove of the XY table.
• A pair of workpiece clips 990561
V-Block with Clamp come.
• Maximum workpiece
diameter: .98" (25mm)
172-378
Steel Gage Blocks
• Mass: 1.76 lbs. (0.8kg)
611201-531 1" (ASME 0)
611202-531 2" (ASME 0)
• Mass: .88 lbs. (0.4kg) 176-107 exceeding the stroke (=measuring range) of the
micrometer head attached.
• Ceramic gage blocks (CERA Block) are also available.
6
Versatile
Versatile
MEASURING UNITS (OPTIONAL)
Micrometer Heads Digimatic Micrometer Heads
(LCD readout)
152-390
164-164
(Two units are required
152-389 for an XY table.)
DMX-2
12AAD538 QM-Data200
Connecting 264-140A
Digimatic Micrometer Head SPC Cable Cable D
164-161 x2pcs. 936937 (1m) x2pcs. 12AAD195
164-162 x2pcs.
7
One Number to Serve You Better
Aurora, Illinois
1-888-MITUTOYO
(Corporate (1-888-648-8869)
Headquarters)
(630) 978-5385
Westford, Massachusetts
Aurora,
(978) Illinois
692-8765
(Corporate Headquarters)
Huntersville, North Carolina
(704) 875-8332
Westford, Massachusetts
Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data
contained in this printed matter as well as other technical data are to be regarded as approximate average values. We therefore Mason, Ohio North Carolina
Huntersville,
reserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations, descriptions (513) 754-0709
Mason, Ohio
and illustrations of the products were valid at the time of printing. In addition, the latest applicable version of our General Trad- Plymouth, Michigan
ing Conditions will apply. Only quotations submitted by ourselves may be regarded as definitive. (734) 459-2810
Plymouth, Michigan
Mitutoyo products are subject to US Export Administration Regulations (EAR). Re-export or relocation of Mitutoyo products may City of Industry,
City of Industry,California
California
require prior approval by an appropriate governing authority. (626) 961-9661
Birmingham, Alabama
Trademarks and Registrations Kirkland, Washington
Renton,
(408) Washington
396-4428
Designations used by companies to distinguish their products are often claimed as trademarks. In all instances where Mitutoyo
America Corporation is aware of a claim, the product names appear in initial capital or all capital letters. The appropriate compa-
nies should be contacted for more complete trademark and registration information.
We reserve the right to change specifications and prices without notice.
© 2014 Mitutoyo America Corporation, Aurora IL 2.5M 0613-02 • Printed in USA • Feb. 2014