Professional Documents
Culture Documents
DC Trace
DC Earth Fault Locator
The Measurement
In DC System, small incipient faults having high resistance will unbalance system voltage & after further
degradation that might become a permanent fault / short circuit leading to failure of system. This can
lead to excessive discharge of battery bank and thus permanent damage to battery bank. The repair/
!
"#$%'*%+$+$+ +*$$0$+!
1
minimum possible time.
2
3#1
41
current to ground & thus a ’Faulty Circuit’ or ‘DC Leakage’ will occur leading to unbalanced voltage levels.
Signal Generator (Fixed) is connected across faulty bus bar (+ Ve or –Ve) and ground, generating low
6
6171418
from ground it will return back to Signal Generator, thus path of signal is completed. During this operation,
Signal Generator internally assesses fault condition & automatically injects required voltage & current.
Fault tracing & pinpointing is carried out by Signal Receiver (portable) with current sensor clamps. After
connecting clamps at faulty cable, Receiver will show indication of signal strength & fault current direction.
91
:
8 1
www.scopetnm.com
SCOPE
Special Features
; Ground fault location is carried out in online condition hence no disconnection of installation is re-
quired.
; Signal Generator has adjustable output voltages (24V, 48V, 110V, 220V, 500V and 1000V) and auto
H
J0K M0KN
:
; Q 1J N
; Digital Signal Processing Technology for detecting grounding resistance and distributed capacitance.
; KH
6
J'UW$30'UW%'UW*M0UWN !:
avoid interference generated from DC system itself.
; Frequency Spectrum Analysis to test the existing interferences available in the circuit and selection of
correct test frequency.
; 9X1H
:
leakage quickly.
; Direction (positive or reverse) indication for leakage current helps quick pinpointing of the faulty
grounding point.
; Following multiple analysis & indications of ground fault makes pinpointing easy:
; 341
; Q:
; Comparison of signal strength
; J N1
!6
; Online fault detection, no shutdown required.
; Detect DC source mixing faults for dual battery system.
; Fault detection at incipient stage due to high fault location sensitivity.
; Z6:
; Can detect complex, multiple faults.
www.scopetnm.com
DC Trace
Z
:6
1
; Q1
3#
; 7"#6 :
; Railways : Signaling, Communication and Locomotive electronic equipments
; Others : DC System in Aviation, Metallurgy, Auto Works etc.
Parameter DC Trace
Fault Location Technique 3 41 Q : #
signal strength
Output Voltage 24V, 48V, 110V, 220V, 500V, 1000V
Output Frequency 10Hz - Default , 50Hz, 60Hz, 325Hz
Fault Location Sensitivity
Current Detection Sensitivity ^'K
Current Detection Clamp 60mm (jaw opening), Ø 65 x 30mm and Ø12 x 8mm, dual range
Display - Signal Generator 128 × 64 pixel colour LCD
Display - Signal Receiver 240 × 320 pixel 3.5” colour TFT touch screen
Power Supply - Signal Generator 3500mAh/14.4V re-chargeable Li-ion battery
Power Supply - Signal Receiver 2400mAh/8.4V re-chargeable Li-ion battery
Battery Life ^+
Battery Charging Input 230V / 110V AC, 50 / 60Hz
Environment '`0'{# |0}XUJ~$N
Dimensions - Signal Generator 270 X 240 X 120mm
Dimensions - Signal Receiver 210 X 110 X 60mm
Weight 6.0 kg (Approx.)
Standard Accessories
Description Quantity
DC Trace in soft carrying case consisting of :
Signal Generator in moulded case 1
Signal Receiver (DC TraceR) 1
One pair of dual range CT with Cable 1.5 Meter 1
Crocodile clips (Red & Black) 2 Red & 2 Black
Battery Charger for Signal Generator & Signal Receiver 1 each
Signal Generator Output Cable 2.5 Meter 2
923# 1
Instruction Manual, Test and Calibration Report 1 each
Pen Drive 1
www.scopetnm.com