Professional Documents
Culture Documents
2012
Option catalogue BM 500/15 & BM 600/15 Page: 1
OPTIONAL EQUIPMENT
AND FIELD KITS
Notes / Legend
Factory kit (ZA): Factory assembled kit. Parts in the standard machine may be deleted
here, the price reduction for these deleted parts is included in the total
price of the optional equipment.
Field installation kit (NS): Ready to install in the field. The kit contains all necessary drawings
and assembly instructions. Assembly parts which may be deleted, can
not be credited.
Table of Content
1 Basic machine
1.1 4-wheel version FO31, ZA
1.2 Wheather protection roof FO1, ZA
1.3 Scraper, split FO34, ZA
1.4 Hydraulic hammer connection HY12, ZA
1.5 Road lights E2, ZA + NS
1.6 Additional working light, plug-in E67, NS
1.7 Additional working light, magnet base E68, NS
1.8 Special painting SL1, ZA
1.9 Multi-colour painting SL28, ZA
1.10 Bio hydraulic oil HY2, ZA
1.11 Seat heating K21, ZA
1.12 Service kit 1000 h SW1, NS
1.13 Oil service kit SW6, NS
4 Loading systems
4.1 Conveyor belt, long FO21, NS
4.2 Conveyor belt, short FO22, NS
6 Others
6.1 Hydraulic hammer HY11, NS
6.2 Transport trailer on request
6.3 Fleet Management BOMAG TELEMATIC E66, ZA
1. Basic machine
Description:
4-wheel drive for improved traction and high stability. The unique geometry of the front axle provides a
manoeuvrability and turning radius as a 3-wheel version.
1. Basic machine
Description:
The weather protection roof is hydraulically height adjustable from the operator’s seat. It offers optimal
protection in any situation and does not affect the transport height. The ball bearing suspension ensures
a very easy manual slide from side to side.
The operator can easily avoid any obstacles such as overhanging trees and is still protected by the roof.
With it, the milling machine offers maximum flexible working.
1. Basic machine
Description:
The split scraper is a requirement for the efficient use of different width milling drums.
The milled trench and the existing surface are cleaned effectively and the milling material is loaded as
normal. Manual work is reduced to a minimum.
Please order the scraper bar for the reduced milling width 300mm (FO50), 400mm (FO51) or 500mm
(FO52) separately!
1. Basic machine
Description:
Power take off for hydraulic hammer
- Reasonable extension of the application possibilities of the cold milling machine.
- Minor works can be accomplished without additional equipment.
1. Basic machine
Description:
These lights including warning lights are mandatory for driving on public roads.
In front: 2 road lights with direction indicators and position lights
In rear: 2 tail lights with direction indicators and reflectors
1. Basic machine
Description:
Additional working light,plug-in
Voltage: 24 V
Power: 70 W
Warning reference: At idle speed, additional head lights may lead to battery discharge!
Please consider the maximum electrical power!
1. Basic machine
Description:
Additional working light, magnet base
Voltage: 24 V
Power: 70 W
Additional working lights provide optimal illumination on the job site. The magnet base enables the
working light to be placed in the most effective position to ensure sufficient light for night work.
Warning reference: At idle speed, additional head lights may lead to battery discharge!
Please consider the maximum electrical power!
1. Basic machine
Description:
Special painting of the yellow parts according to customer own colour specification.
1. Basic machine
Description:
Multi-colour painting according to customer own colour specification, e.g. yellow and grey parts.
Excluded are conveyor belt and water tank.
1. Basic machine
Description:
Advantages for environment and health:
• easily bio-degradable
• no contamination of ground and waterways
• selected oil with reputable environment labels and awards
1. Basic machine
Description:
As perfect complement of the comfortable seated work position the health of the operator will be
protected. Easily switched on when needed, the seat gets pleasantly warm shortly.
Battery discharge at idle speed is avoided by a control system.
1. Basic machine
Description:
Service Kit 1000h
Long downtime or even consequential damages on your BOMAG machine can result from mounting of
supposedly cheaper parts or even skipping regular maintenance. Prevent this with BOMAG Service kits
by exchanging the essential BOMAG original spare parts in your machine within the mandatory
maintenance intervals.
1. Basic machine
Description:
Oil service kit
Long downtime or even consequential damages on your BOMAG machine can result from mounting of
supposedly cheaper parts or even skipping regular maintenance. Prevent this with BOMAG Service kits
by exchanging the essential BOMAG original spare parts in your machine within the mandatory
maintenance intervals.
Description:
Quick-change - Milling drum
Milling width : 600 mm
Tool spacing: 15 mm
Milling depth: 0 - 210 mm
No. of milling tools: 64 pcs. => without milling tools
The all-rounder for most milling jobs: an exceptionally smooth milling behaviour results from the optimal
arrangement of the milling tools. The thicker drum shell acts as a fly wheel and works with considerably
lower vibrations than conventional drums.
The unique arrangement of the edging tools provides precise cutting edges with considerably less wear
than conventional drums, especially when cutting a radius. Thus eliminating the annoying re-welding of
the tool holder.
All BOMAG milling drums are designed as quick-change milling drums and thus guarantee minimum
downtime to exchange.
Description:
Quick-change – Milling Drum
Milling width : 500 mm
Tool spacing: 15 mm
Milling depth: 0 - 210 mm
No. of milling tools: 58 pcs. => without milling tools
The all-rounder for most milling jobs: an exceptionally smooth milling behaviour results from the optimal
arrangement of the milling tools. The thicker drum shell acts as a fly wheel and works with considerably
lower vibrations than conventional drums.
The unique arrangement of the edging tools provides precise cutting edges with considerably less wear
than conventional drums, especially when cutting a radius. Thus eliminating the annoying re-welding of
the tool holder.
All BOMAG milling drums are designed as quick-change milling drums and thus guarantee minimum
downtime to exchange.
Description:
Quick-change – POWER DRUM
Milling width : 500 mm
Tool spacing: 20 mm
Milling depth: 0 - 210 mm
No. of milling tools: 50 pcs. => without milling tools
With a tool spacing of 20mm, this drum is ideally suited to deep milling, particularly trenches. It offers a
feed and wear advantage of up to 30% compared to the standard drum. The quick change facility makes
it a reasonable option, even on small job sites.
Also here the operator feels the BOMAG advantages by the thicker drum shell and the unique
arrangement of the edging tools.
All BOMAG milling drums are designed as quick-change milling drums and thus guarantee minimum
downtime to exchange.
Description:
Quick-change – Fine Milling drum
Milling width : 500 mm
Tool spacing: 6 mm
Milling depth: 0 - 50 mm
No. of milling tools: 82 pcs. => without milling tools
With 6mm tool spacing the ideal milling drum for the fine milling: ideal for quick repairs of wheel ruts and
for preparation of thin surface layers.
The thicker drum shell acts as a fly wheel and works with considerably lower vibrations than conventional
drums. This is reflected in the high precision of the milling surface.
All BOMAG milling drums are designed as quick-change milling drums and thus guarantee minimum
downtime to exchange.
Description:
Quick-change – Milling drum Efficient use only with options: FO34, split craper and
Milling width : 400 mm FO51 scraper 400mm !
Tool spacing 14 mm
Milling depth: 0 - 160 mm
No. of milling tools: 54 pcs. => without milling tools
If less wide is required: this milling drum combines the advantages of the standard milling drum, a unique
smooth milling behaviour by an optimal arrangement of the milling tools, on a working width of only
400mm. The thicker drum shell acts as a fly wheel and works with considerably lower vibrations than
conventional drums.
The unique arrangement of the edging tools provides precise cutting edges with considerably less wear
than conventional drums, especially when cutting a radius. Thus eliminating the annoying re-welding of
the tool holder.
All BOMAG milling drums are designed as quick-change milling drums and thus guarantee minimum
downtime to exchange.
Desciption:
Quick-change – Milling drum Efficient use only with options: FO34, split craper and
Milling width : 300 mm FO50 scraper 300mm !
Tool spacing: 14 mm
Milling depth: 0 - 160 mm
No. of milling tools: 46 pcs. => without milling tools
If less wide is required: this milling drum combines the advantages of the standard milling drum, a unique
smooth milling behaviour by an optimal arrangement of the milling tools, on a working width of only
300mm. The thicker drum shell acts as a fly wheel and works with considerably lower vibrations than
conventional drums.
The unique arrangement of the edging tools provides precise cutting edges with considerably less wear
than conventional drums, especially when cutting a radius. Thus eliminating the annoying re-welding of
the tool holder.
All BOMAG milling drums are designed as quick-change milling drums and thus guarantee minimum
downtime to exchange.
Description:
Scraper bar 500mm
When using a milling drum with a smaller milling width than the maximum width, the split scraper, FO34,
and the scraper bar corresponding to the milling width are required to collect and load the milling
material.
During the milling the scraper bar immerges into the milled trench and the surface is cleaned effectively.
Description:
Scraper bar 400mm
When using a milling drum with a smaller milling width than the maximum width, the split scraper, FO34,
and the scraper bar corresponding to the milling width are required to collect and load the milling
material.
During the milling the scraper bar immerges into the milled trench and the surface is cleaned effectively.
Beschreibung:
Scraper bar 300mm
When using a milling drum with a smaller milling width than the maximum width, the split scraper, FO34,
and the scraper bar corresponding to the milling width are required to collect and load the milling
material.
During the milling the scraper bar immerges into the milled trench and the surface is cleaned effectively.
Description:
Milling tool BMT18
Universal Milling tool for Cold Milling Machines up to 150Hp.
Application from soft to medium asphalt conditions.
The Field installation kit (NS) consists of one pallet with 3000 milling tools, practically packed in boxes à
50 pieces.
Description:
Milling tool BMT01E
Premium Milling tool for Cold Milling Machines up to 150Hp. Already included in the basic equipment.
The Field installation kit (NS) consists of one pallet with 3600 milling tools, practically packed in boxes à
60 pieces.
Description:
Milling tool BMT02E
Premium Milling tool for Cold Milling Machines up to 150Hp. With large carbide tip.
The Field installation kit (NS) consists of one pallet with 3600 milling tools, practically packed in boxes à
60 pieces.
Description:
Milling tool BMT22 - Concrete
Premium Milling tool for Cold Milling Machines up to 150Hp.
Application on concrete.
The unique design with a slim but extra long carbide tip bursts the brittle but hard material. The extra long
carbide tip is re-sharpening itself due to the turning and guarantees a long durability.
The Field installation kit (NS) consists of one pallet with 3000 milling tools, practically packed in boxes à
50 pieces.
Description:
Milling drum 500 LA15 for W500
Milling width : 500 mm
Tool spacing: 15 mm
Milling depth: 0 - 160 mm
No. of milling tools: 54 pcs. => without milling tools
The kit contains additionally to the milling drum two boxes of BMT01E Milling tools (=120 pieces)
Description:
Milling drum 500 LA15 for W50DC
Milling width : 500 mm
Tool spacing: 15 mm
Milling depth: 0 - 210 mm
No. of milling tools: 58 pcs. => without milling tools
The kit contains additionally to the milling drum two boxes of BMT01E Milling tools (=120 pieces)
Description:
Fine Milling drum 500 LA6 for W50DC
Milling width : 500 mm
Tool spacing: 6 mm
Milling depth: 0 - 50 mm
No. of milling tools: 82 pcs. => without milling tools
The kit contains additionally to the milling drum two boxes of BMT01E Milling tools (=120 pieces)
4. Loading systems
Description:
Conveyor belt, long
The long conveyor belt has a long range to also load larger trucks optimally
An intelligent arrangement of the cylinder on the conveyor belt enables a continuously height adjustment
without re-hanging chains. Furthermore the conveyor belt is dismantled notably fast without the usual
lifting of heavy units.
4. Loading systems
Description:
Conveyor belt, short
Conveyor belt for loading of the milling material into a wheel loader shovel or depositing besides the
milled trench
An intelligent arrangement of the cylinder on the conveyor belt enables a continuously height adjustment
without re-hanging chains. Furthermore the conveyor belt is dismantled notably fast without the usual
lifting of heavy units.
Description:
Operation display + 1 wire rope sensor (right) + controller
The basic automatic levelling enables to automatically copy the right hand reference surface. The unique
long side plate generates an average about slight tolerances and therefore guarantees a high evenness.
Description:
Basic requirement is the Option „FO46, Automatic Levelling Basic“ !
The wire rope sensor (left) enables an exact copying by scanning left and right with the side plates.
The unique long side plates generate an average about slight tolerences and therefore guarantee a high
evenness.
Description:
Basic requirement is the Option „FO46, Automatic Levelling Basic“ !
6. Others
Description:
Hydraulic hammer
Weight: ca 23kg
Working pressure: 105 – 125 bar
Oil quantity: 20 – 30 l/min
6. Others
Description:
Transport trailer
Permissible total weight: 11.900kg
Actual load: 9.550kg
Loading area: 6mx 2m
Loading height: 0,70 m
This transport trailer with continuous loading ramp and adjustable conveyor support is the ideal transport
device for quick job site changes.
Transport trailer
Machine ZA NS
BM 500/15 - xx
BM 600/15 - xx
6. Others
Description:
BOMAG TELEMATIC is a Fleet-management-system.
With BOMAG TELEMATIC the machine deployment is more efficient because the machine operator
can locate his machines and collect and save operating conditions. Operating hours worked and fuel
consumptions are documented. BOMAG TELEMATIC can recognize unauthorized use and theft and
simplify the maintenance.
The system consists of a hardware integrated in the machine and an internet application. All data are
stored in a data base. Individual access for each user and password protected.
The scope of function of BOMAG TELEMATIC includes the full service for data transfer and provision
for 36 months. No additional costs. After expiry of 36 months the service can be extended under the
conditions which then apply.
BOMAG TELEMATIC is not available world-wide. The current list of countries can be requested at
department VP Product Management.