Professional Documents
Culture Documents
Chemical Anchors
Plastic anchors
* Special items: Made to order. Allow longer delivery time. Kindly check with your Hilti representative.
Application Base material Approval Anchor type Advantages Drill bit Specification Setting
diameter
resp. anchor
Through-fastening
Steel, galvanised
Hollow brick masonry
Lightweight concrete
Uncracked concrete
External thread
Internal thread
Cracked Concrete
Aerated concrete
Pre-setting
galvanised
Fire tested
Approval
Mechanical anchor
systems
Heavy duty anchors
Anchor fastenings for high loads, l l l l l HDA-T/-TR/-TF/-P/-PR/-PF n Automatic undercutting Drill bit dia.: 20-30 mm l l l l l l
e.g. in steel construction and plant undercut anchor n High load capacity Anchor size: M10-M20
construction, suitable for dynamic loading n Approved for dynamic loads
Fastening heavy loads e.g. from l l l l HSL-3 heavy duty n Integrated plastic section to telescope and pull down tightly Drill bit dia.: 12-32 mm l l l l
columns, high racks, machines anchor n Special elements Anchor size: M8-M24
n The bolt can be retorqued
Fastening heavy loads e,g. from l l HSL-G-R heavy duty n Integrated plastic section to telescope and pull down tightly Drill bit dia.: 12-28 mm l l l
columns, high racks, machines anchor n Special elements Anchor size: M8-M20
n The bolt can be retorqued
Safety relevent fastening at facades l l l l HSC-A(R)/-I(R) n Automatic undercutting Drill bit dia.: 14-20 mm l l l l l
and ceilings where short embedment safety anchor n Small edge distances and spacings Anchor size: M6-M12
depth is required n Small setting depth
Fastening through in-place parts l l l l HST/-R/-HCR stud n Quick and simple setting operation Drill bit dia.: 8-24 mm l l l l l
e.g. angles, tracks, channels anchor n Setting mark Anchor size: M8-M24
wooden beams,etc. n Safety wedge sleeve for certain follow up expansion
Fastening through in-place parts l l l HSA/-R/-F S stud n Two setting depths Drill bit dia.: 6-20 mm l l l l l
like wood beams, metal sections, anchor n Setting mark Anchor size: M6-M20
columns,brackets etc. n Extremely ductile steel for high bending capacity
Temporary fastenings in concrete l l l l HLC sleeve anchor n Short setting/removing operation Drill bit dia.: 8-16 mm l l l
(e.g. formwork), fastening in base- n Good load values in green concrete Anchor size: M6-M12
material of low density n Bridging of gaps 8
Fastening with threaded rods for l1) l l l HKD push-in anchor An “intelligent”expansion section which adapts to suit the base material Drill bit dia.: 8-25 mm
n l l l l
pipe suspensions, air ducts, n Visual verification of full expansion Anchor size: M8-M25
suspended ceilings n Small setting depth
Fastening channels, brackets, l l l l HUS-H 10,5/12,5/16,5 n Screw driven straight into base material without using an anchor Drill bit dia.: 8-14 mm l
racks, seatings screw anchor n Forged on washer
n Matched system of screw anchor and screwdriver
Light duty anchors
Various l l l l l l HUD-1 universal anchor n Fast setting 5-14 mm l l
applications n Flexibility of screw length
n An anchor for every base material 6-10 mm
HUD-L universal anchor
Fastenings in light weight l HGN gas concrete anchor n Good keying thanks to large fins 12-14 mm l l
building materials n Flexibility of screw length
Fastenings to weak materials l l HLD light duty anchor n Flexibility of screw length Drill bit dia.: 10 mm l
with cavities n Resilient toggling action to suit every base material
Securing support frames, timber frames, l l l l l l l HRD-U/-S frame anchor n Preassembled with screw Drill bit dia.: 10 mm l l l
façade panels, curtain walling n Screw of steel 5.8 grade Drill bit dia.: 14 mm
or stainless steel A4 (1.4401)
Fastening wood battens, l ¡ ¡ l ¡ HPS-1 impact anchor n Quick setting with hammer 5-8 mm l l l l
components for electrical and plumbing n 4-wings expansion Thread: M6
installations
Application Base material Approval Anchor type Advantages Drill bit Specification Setting
diameter
resp. anchor
Through-fastening
Steel, galvanised
Hollow brick masonry
Lightweight concrete
Uncracked concrete
External thread
Internal thread
Cracked Concrete
Aerated concrete
Pre-setting
galvanised
Fire tested
Approval
Light duty anchors
Fastening light channels, brackets, l1) l l l l l l l HUS screw anchor n Screw driven straight into base material without using an anchor Drill bit dia.:6mm l l l l
interior paneling or cladding n Small drill bit diameter
n Matched system of screw anchor and screwdriver
Fastening battens, channels panels l l HHD-S cavity anchor n Controlled setting Drill bit dia.: 8-12 mm l l
n D eliverable with or without prefitted screw
Suspension from concrete ceilings l1) l l l l DBZ wedge anchor n Small drill bit diameter Drill bit dia.: 6 mm l l
e.g. using steel straps, punched band, n Quick setting by impact extension
Nonius system hanger n Automatic follow-up expansion
For suspended ceilings and other l1) l l l l HA8 ring/hook anchor n Quick and easy setting Drill bit dia.: 8 mm l l
items from concrete ceilings n Automatic follow-up expansion
Various fastenings in hollow decks l l l HPD aerated concrete n Approved (DIBt) without predrilling l l l
anchor n Fire resistance Thread: M6-M10
n Immediately loadable
Suspension from pre-stressed l l l HKH hollow deck n Approval for single point fastenings Drill bit dia.: 10-14mm l l l l
concrete hollow decks anchor n Approved for sprinkler systems Thread: M6-M10
Suspension from pre-stressed l l l HTW twin anchor n Approval for pre-stressed concrete hollow decks Drill bit dia.: 13 mm l l
concrete hollow decks n Quick setting
n No setting tools needed
Fastening of soft and hard, self supporting l l l l IZ expandable n Corrosion resistant Drill bit dia.: 8 mm l
insulating materials insulation fastener n No heat bridge insulating material
n Reliable bonding of plaster thickness up to 160 mm
Fastening of soft, non self supporting l l l IN insulation fastener n Reliable pressing on Drill bit dia.: 8 mm l
insulating materials
Fastening insulating material of hard l l l l l IDMS/IDMR metal n Quick and safe Drill bit dia.: 8 mm l l l
self supporting insulating material insulation fastener n Fire resistant insulating material
where non flammable material is specified thickness: up to 120 mm
Adhesive anchor
systems
Heavy duty anchors
Application Base material Approval Anchor type Advantages Drill bit Specification Setting
diameter
Through-fastening
Steel, galvanised
Hollow brick masonry
Lightweight concrete
Uncracked concrete
External thread
Internal thread
Cracked Concrete
Aerated concrete
Pre-setting
galvanised
Fire tested
Approval
Heavy duty anchors
Heavy duty fastening with small spacings l l l l HVU adhesive n No expansion pressure HAS/HAS-R M8-M39 l l l l l l
and edge distances anchor n Small edge distances and spacings HIS-N/HIS-RN M8-M20
n A strong and flexible foil capsule rebar dia. 8-40 mm
Adhesive anchor for uncracked concrete l l l l HIT-RE 500 n No expansion pressure HAS/HAS-R M8 - M39 l l l l l l
n Flexibility in terms of drill bit diameter and annular gap HIS-N/HIS-RN M8 - M20
n Flexibility in terms of working time rebar dia. 8 - 40mm
Adhesive anchor for uncracked concrete l l l l HIT-HY 150 n No expansion pressure HAS/HAS-R M8-M24 l l l l l l
n No styrene content HIS-N/HIS-RN M8-M20
n No plasticizer content rebar dia. 8-25 mm
n Environmental protection due to the minimized packaging
Adhesive anchor for uncracked concrete l l HT-ICE n No expansion pressure HAS/HAS-R M8-M24 l l l l l l
n No styrene content HIS-N/HIS-RN M8-M20
n No plasticizer content rebar dia. 8-25 mm
Special anchors
Securing and repairing l l l HWB cladding n Anchor takes up forces flexibly over large area via plastic ribs 22, 28 mm l l
industrially fabricated structures anchor n Small drill bit diameter
(three layer-panels)
Simply connected.
Hilti solutions for post-installed rebar connections.
Planting a tree is really quite easy. Use the right tool to dig a suitably-sized hole, cle- With the Hilti solution, making post-installed rebar connections is just as
an out the surplus earth and place the tree in the hole. If you then give the young tree easy as planting a tree. 8
enough water it will take root and safely withstand all kinds of stress and strain, pos-
sibly even for hundreds of years. With the Hilti solution, making post-installed rebar Fast Drill the hole quickly using a Hilti
connections is just as easy. The legendary Hilti combihammers and rotary hammers plus highly efficient combihammer and suitable drill bits.
Hilti dispensers let you work faster – for longer.
Easy
Dig the hole. As secure as cast-in bars. Proper hole cleaning is decisive. With the Hilti Profi Rebar sets you have all the
For dependable concrete connections you should rely only on Hilti’s rebar installation accessories you need conveniently at hand.
well-proven and approved injectable adhesive Reliable Clean the hole thoroughly using the
mortars, simple but effective hole-cleaning aids Post-installed reinforcing bars set in Hilti HIT are as secure and reliable as cast- cleaning aids from the Hilti profi rebar sets.
and powerful rotary hammer drills. in rebars. Accordingly, Hilti HIT systems have been officially approved for the
applicable applications.
Hilti’s highly experienced technical Join the Hilti HIT professionals!
specialists are at your service round Hilti provides special training on the use of Hilti HIT systems for post-installed
the clock and will be pleased to an- rebar connections.
Clean out the hole.
swer any questions. You thus have
permanent access to over 25 years
of practical experience in the field of The complete system for Inject Hilti HIT mortar conveniently and
post-installed rebar connections – ex- post-installed rebar connections. install rebars reliably.
perience that will help you achieve
extremely reliable connections
and maximum cost
efficiency.
Plant the tree and water it properly.
PS 200 Ferroscan TE 70-ATC HIT Profi Rebar sets DAG 125 HIT-HY 150-MAX HIT-RE 500
combihammer angle grinder injection system injection system
nn Arrowhead shaped capsules don’t drop out of overhead holes Anchor rod HAS-E M16X125/148 18 mm 125 mm 292 mm 148 mm 10 pc 00333107
Anchor rod HAS-E M16X125/198 18 mm 125 mm 342 mm 198 mm 10 pc 00333108
Anchor rod HAS-E M16X125/348 18 mm 125 mm 492 mm 348 mm 10 pc 00333109
1
Anchor rod HAS-E M20X170/48 24 mm 170 mm 240 mm 48 mm 10 pc 00332223
Anchor rod HAS-E M20X170/68 24 mm 170 mm 260 mm 68 mm 10 pc 00333110
Anchor rod HAS-E M20X170/108 24 mm 170 mm 300 mm 108 mm 10 pc 00333111
Anchor rod HAS-E M20X170/158 24 mm 170 mm 350 mm 158 mm 10 pc 00333112
Anchor rod HAS-E M20X170/208 24 mm 170 mm 400 mm 208 mm 10 pc 00333113
Anchor rod HAS-E M24X210/54 28 mm 210 mm 290 mm 54 mm 10 pc 00332224
Anchor rod HAS-E M27X240/60 30 mm 240 mm 340 mm 60 mm 4 pc 00333114
Ordering Anchor rod HAS-E M30X270/70 35 mm 270 mm 380 mm 70 mm 4 pc 00333115
Anchor rod HAS-E M33X300/80 37 mm 300 mm 420 mm 70 mm 4 pc 00333116 8
Order designation Hole depth Drill bit diameter Package quantity Item Number
Anchor rod HAS-E M36X330/90 40 mm 330 mm 460 mm 90 mm 2 pc 00333117
Adhesive capsule HVU M8X80 80 mm 10 mm 10 pc 00256691
Anchor rod HAS-E M39X360/100 42 mm 360 mm 510 mm 100 mm 2 pc 00333118
Adhesive capsule HVU M10X90 90 mm 12 mm 10 pc 00256692
Adhesive capsule HVU M10X135 135 mm 12 mm 20 pc 00307914
Adhesive capsule HVU M12X110 110 mm 14 mm 10 pc 00256693
Adhesive capsule HVU M12X165 165 mm 14 mm 20 pc 00307915
Adhesive capsule HVU M16X125 125 mm 18 mm 10 pc 00256694
Adhesive capsule HVU M16X190 190 mm 18 mm 10 pc 00307916
Adhesive capsule HVU M20X170 170 mm 24 mm 5 pc 00256695
Adhesive capsule HVU M20X255 255 mm 24 mm 5 pc 00307917
Adhesive capsule HVU M24X210 210 mm 28 mm 5 pc 00256696
Adhesive capsule HVU M27X240 240 mm 30 mm 4 pc 00256697
Adhesive capsule HVU M30X270 270 mm 35 mm pc 00256698
Adhesive capsule HVU M33X300 300 mm 37 mm 4 pc 00256699
Adhesive capsule HVU M36X330 330 mm 40 mm 2 pc 00256700
Adhesive capsule HVU M39X360 360 mm 42 mm 2 pc 00256701
Threaded Anchor Rod Order designation Special Item Drill bit Hole depth Anchor length Thickness Minimum or- Item Number
HAS-E-R diameter fastened -
max
der quantity
Anchor rod HAS-E-F M8X80/14 10 mm 80 mm 106 mm 14 mm 20 pc 00333143 Material: Stainless steel A4-70 (1.4401)
Anchor rod HAS-E-F M8X80/54 * 10 mm 80 mm 146 mm 54 mm 10 pc 00333144 Order designation Drill bit diameter Hole depth Anchor length Minimum order Item Number
quantity
Anchor rod HAS-E-F M10X90/21 12 mm 90 mm 125 mm 21 mm 20 pc 00333145
Int. threaded sleeve HIS-RN M8X90 A4 14 mm 90 mm 90 mm 10 pc 00258024
Anchor rod HAS-E-F M10X90/61 12 mm 90 mm 165 mm 61 mm 10 pc 00333146
Int. threaded sleeve HIS-RN M10X110 A4 18 mm 110 mm 110 mm 10 pc 00258025
Anchor rod HAS-E-F M10X90/81 * 12 mm 90 mm 185 mm 81 mm 10 pc 00333147
Int. threaded sleeve HIS-RN M12X125 A4 22 mm 125 mm 125 mm 5 pc 00258026
Anchor rod HAS-E-F M12X110/28 14 mm 110 mm 153 mm 28 mm 20 pc 00333148
Int. threaded sleeve HIS-RN M16X170 A4 28 mm 170 mm 170 mm 5 pc 00258027
Anchor rod HAS-E-F M12X110/88 14 mm 110 mm 213 mm 88 mm 10 pc 00333149
Int. threaded sleeve HIS-RN M20X205 A4 32 mm 205 mm 205 mm 5 pc 00258028
Anchor rod HAS-E-F M12X110/128 * 14 mm 110 mm 253 mm 128 mm 10 pc 00333150
Anchor rod HAS-E-F M12X110/168 * 14 mm 110 mm 293 mm 168 mm 10 pc 00333151
Anchor rod HAS-E-F M16X125/20 18 mm 125 mm 164 mm 20 mm 10 pc 00333152
Anchor rod HAS-E-F M16X125/38 18 mm 125 mm 182 mm 38 mm 20 pc 00333153
Anchor rod HAS-E-F M16X125/108 18 mm 125 mm 252 mm 108 mm 10 pc 00333154
Anchor rod HAS-E-F M16X125/148 * 18 mm 125 mm 292 mm 148 mm 10 pc 00333155
Anchor rod HAS-E-F M16X125/198 * 18 mm 125 mm 342 mm 198 mm 10 pc 00333156
• Diameters M8 to M16
Ordering:
Setting Tool
HAS-E • Diameters M20 to M24
Ordering
HAS-E/ -EF/ -ER
M20 to M24 TE 50 to TE 70/TE 70 ATC
Order designation Minimum order quantity Item Number TE-Y E M20 to M24
(drilling and hammering)
Setting tool TE-C-E M8 1 pc 00369223
Setting tool TE-C-E M10 1 pc 00369224
Setting tool TE-C-E M12 (1/2”) 1 pc 00369225
Setting tool TE-C-E M16 (5/8”) 1 pc 00369226
+
Setting tool TE-T-E M20 (3/4”) 1 pc 00376461
• Setting tools for HIS-N/RN M8 to M20
1/2" - Sw TE-C 1/2"
Setting Tool M 8 (Sw = 13)
M10 (Sw = 17) TE 6 to TE 40
HAS-E M12 (Sw = 19) (drilling and hammering)
HIS-N/-RN HIS-S
M8 to M20 M8 to M20
Ordering
+
3/4" - Sw TE-FY 3/4"
M16 (Sw = 24) TE 50 to TE 70/TE 70 ATC
Order Description Package quantity Item Number
M20 (Sw = 30) (drilling and hammering)
Setting tool TE-Y-E M16 1 pc 00369227
Setting tool TE-Y-E M20 1 pc 00369228
Setting tool TE-Y-E M24 1 pc 00369229
Anchor Rod
HAS-RTZ
max
8
Anchor rod HAS-RTZ M10X75/15 * 12 mm 90 mm 124 mm 15 mm 10 pc 00310019
Drill holes. Blow out dust Insert HVU-TZ Drive in with rotary Anchor rod HAS-RTZ M10X75/30 * 12 mm 90 mm 139 mm 30 mm 10 pc 00308391
and fragments. capsule. hammering action.
5 6 7 Tinst Anchor rod HAS-RTZ M10X75/50 * 12 mm 90 mm 159 mm 50 mm 10 pc 00308392
tgel
tcure
Anchor rod HAS-RTZ M12X95/25 * 14 mm 110 mm 158 mm 25 mm 10 pc 00308393
Anchor rod HAS-RTZ M12X95/40 * 14 mm 110 mm 173 mm 40 mm 10 pc 00333769
Allow gel time to pass. Wait for curing. Apply tightening torque. Anchor rod HAS-RTZ M12X95/50 * 14 mm 110 mm 183 mm 50 mm 10 pc 00308394
Injection washer Anchor rod HAS-RTZ M12X95/100 * 14 mm 110 mm 233 mm 100 mm 10 pc 00308395
nn Allows baseplate clearance hole to be filled with HIT HY 150 Anchor rod HAS-RTZ M16X105/30 * 18 mm 125 mm 181 mm 30 mm 5 pc 00308396
nn This ensures that the applied shear load is distributed evenly on to Anchor rod HAS-RTZ M16X105/60 * 18 mm 125 mm 211 mm 60 mm 5 pc 00308397
all anchors Anchor rod HAS-RTZ M16X105/100 * 18 mm 125 mm 251 mm 100 mm 5 pc 00308398
Spherical washer Anchor rod HAS-RTZ M16X125/30 * 18 mm 145 mm 201 mm 30 mm 5 pc 00332522
nn Prevents local stress raisers if hole is not drilled square to surface Anchor rod HAS-RTZ M16X125/60 * 18 mm 145 mm 231 mm 60 mm 5 pc 00332523
Nut and Locknut Anchor rod HAS-RTZ M16X125/100 * 18 mm 145 mm 271 mm 100 mm 5 pc 00332524
nn Prevents nut from working loose under vibration Anchor rod HAS-RTZ M20X170/40 * 25 mm 195 mm 269 mm 40 mm 4 pc 00335944
Ordering
Order Description Anchor size Hole depth Drill bit diameter Package quantity Item Number
Ordering
Ordering
Material: Epoxy adhesive mortar
Order designation Content per can/cartridge Package quantity Item Number
Features and Benefits Fields of Application Features and Benefits Fields of Application
nn One of the strongest injection systems in the market with ETA nn Any high performance concrete fastenings such as - rebar connec- nn Suitable for cracked and uncracked concrete with all anchoring nn Anchoring of structural steel connections (e.g. steel columns,
approval for reduced rebar embedment depth range tions and repair work elements beams, )
nn No expansion forces in concrete allow for secure applications nn For fastening of threaded rod, sockets and rebar diameter ranging nn Best approved loads according to latest international standards nn Anchoring of secondary steel structures (e.g. staircases, steel
even close to the edges and/or with small spacing from 8 mm to 40 mm into concrete nn Faster curing to boost application productivity: design loads are ledgers, )
nn Low sensitivity to oversized, wet holes due to negligible shrink- nn Ideal solution for diamond cored and wet bore holes or oversized achieved after only 30 minutes at 20°C nn Anchoring of railings/safety barriers
age and adhesive property thus less risk of installation failure holes nn Works like cast in with post-installed rebars nn Structural connections with post-installed rebars
nn Long working time, therefore always enough time for aligning nn Wet or underwater anchoring applications nn Free of styrene and plasticizers, low odor, reduced waste nn Structure renovation/upgrades with post-installed rebars
work and installation of big diameters at deep embedment
nn Easy setting in a wide range of temperature and long working Base Material
time even at elevated temperature
Base material
nn Concrete (non-cracked), Stone (hard natural)
nn Concrete (cracked), Concrete (non-cracked)
1 2 3 4 5 6
8
Ordering
Material: Hybrid adhesive mortar
Order designation Content per can/cartridge Number of mixers included Minimum order quantity Item Number
Ordering Injectable mortar HIT-HY 150 MAX 330/1 330 ml 1 25 pc 00298124
Material: Epoxy-adhesive
Injectable mortar HIT-HY 150 MAX 330/2 330 ml 2 20 pc 00298119
Order Description Content per can/cartridge Package quantity Item Number
Injectable mortar HIT-HY 150 MAX 500/2 500 ml 2 20 pc 00298220
Injectable mortar HIT-RE 500/1100/1 1100 ml 1 pc 00337110
Injectable mortar HIT-HY 150 MAX 1400 1400 ml 1 4 pc 00298294
Injectable mortar HIT-RE 500/330/1 330 ml 1 pc 00305074
Injectable mortar HIT-RE 500/330/1 (25) 330 ml 1 pc 00337109
Injectable mortar HIT-RE 500/500/1 (20) 500 ml 1 pc 00369109
Injectable mortar HIT-RE 500/1400/1 1400 ml 4 pc 00373958
Ordering
Features and Benefits Fields of Application Features and Benefits Fields of Application
nn High loading capacity and optional displacement behaviour nn Rebar applications: Structural connections (e.g. walls, slabs, nn Wide range of fastening applications in the medium load range
nn Easy dispensing thanks to well-proven manual, cordless and
ensures high security even to the edges stairs), Structural repair, Variations to design, Bridge extensions, in hollow block, solid block and concrete where no approval is
pneumatic dispensers
nn Unique hybrid formulation provides excellent long term perform- Road widening, Refurbishments / retrofitting required
nn Unique soft foil pack for less waste
ance, high fire rating and wide range of service temperature nn For use with connectors, anchor rods, internally threaded sleeves nn Fence and railing posts, gates, window gratings, wall cabinets,
and reinforcing bars up to maximum of 25 mm diameter nn Contains no styrene or other blacklisted substances and is virtu-
nn Non hazardous recipe ensures safe and odourless work, also in bathroom fittings, air conditioning systems, lights
ally odorless
closed rooms nn Anchoring applications: Structural steel (e.g. columns, beams), nn Suitable for frequent, repetitive use
Railings (e.g. balconies, hand rails), Façade work / curtain walling, nn Partly-used cartridges can be reused after a break simply by
nn No waste
Heavy industrial equipment / dynamic loading, Seismic retrofitting, fitting a new mixing nozzle
nn Top quality dispensers and optimised viscosity allow ergonomic Sound and crash barriers nn New Hilti HIT-SC composite sleeve with dosing system for less Base material
and comfortable handling and dispensing
waste on hollow materials nn Concrete (non-cracked), Masonry (hollow), Sand-lime stone, Natu-
Base Material ral stone
nn Concrete (non-cracked), Stone (hard natural)
8
Ordering
Material: Hybrid urethane methacrylate adhesive
Ordering Order designation Minimum order quantity Item Number
Injectable mortar HIT-MM PLUS 330/1 25 pc 00408952
Order Description Content per can/cartridge Number of mixers included Package quantity Item Number
Injectable mortar HIT-MM PLUS 500/1 20 pc 00408954
Injectable mortar HIT-HY 150 330/0 330 ml 1 pc 00315960
Nozzle CS-280-D5 (10) 00220139
Injectable mortar HIT-HY 150 330/1/VL 330 ml 1 1 pc 00246650
Injectable mortar HIT-HY 150 330/2 330 ml 2 1 pc 00315959
Injectable mortar HIT-HY 150 500/2 500 ml 2 1 pc 00338973
Injectable mortar HIT-HY 150 1400/1/VL 1400 ml 1 4 pc 00373955
Anchor Rod
HIT-AC
Galvanized min. 5µm
Mesh sleeve HIT-S 16 90 mm 16 mm 10 pc 00068613 Int. threaded sleeve HIT-IC M12x80 22 mm 80 mm 10 pc 00047937
Ordering
AC Pneumatic Dispensers
P 3000-F/3500-F / P 8000 D 8
Ordering
Ordering
Order Description Package content Item
Number
Accessory kit HIT Premium Rebar case Content: case, installation instructions, installation report, drilling aid, com- 00384753
pressed-air connector, blowing extension hoses and tubes, air nozzles DL 12-32
(for rebar diameter 8-25), holders TE-Y and TE-C, brush extensions RBS, round
steel brushes RB 12-32 (for rebar diameter 8-25), injection extension hoses and
tubes, piston plugs SZ 12-32 (for rebar diameter 8-25), markers, thermometer,
rebar saw
Accessory kit HIT Profi Anchor case Content: case, installation instructions, blow-out gun, holder TE-C, brush exten- 00384752
sion RBS 10/0.35, manual brush handle, round steel brushes RB 10-24 (for
threaded rods M10-M20), manual dispenser MD 2500
Accessory kit HIT Profi Rebar case Content: case, installation instructions, installation report, blow-out gun, blowing 00274888
extension hoses, air nozzles DL 12-25 (for rebar diameter 820), holders TE-Y
and TE-C, brush extensions RBS, manual brush extension and handle, round
steel brushes RB 12-25 (for rebar diameter 8-20), manual dispenser MD 2500,
injection extension hoses, piston plugs SZ 12-25 (for rebar diameter 8-20)
Accessories Accessories
AC HIT Profi
AC HIT Profi
Order Description Item Order Description Item
Number Number
Case HIT Premium Rebar 00384759 Round steel brush HIT-RB 12 n 00336548
n
Assembly instructions HIT Profi n 00384756 Round steel brush HIT-RB 16 n 00336550
Installation report HIT Profi n 00384755 Round steel brush HIT-RB 18 n 00336551
Extension hose HIT-DL 10/0.8 n 00038251 Round steel brush HIT-RB 25 n 00336553
Extension hose HIT-DL 16/0.8 n 00038252 Round steel brush HIT-RB 32 n 00336554
Features and Benefits Fields of Application Undercut anchor HDA-TR 20-M10x100/20 20 mm 107 mm 150 mm 20 mm 12 pc 00339351
nn Self-undercutting anchor: Simple and quick undercutting opera- nn Anchor fastenings for high loads and most stringent safety require- Undercut anchor HDA-TR 22-M12x125/30 22 mm 134.5 mm 190 mm 30 mm 8 pc 00339352
tion results in a keying effect for maximum security even in ments e.g. in power plant and installation construction , securing Undercut anchor HDA-TR 22-M12x125/50 22 mm 134.5 mm 210 mm 50 mm 8 pc 00339353
cracked concrete heavy machinery and machines
Undercut anchor HDA-TR 30-M16x190/40 30 mm 203 mm 275 mm 40 mm 4 pc 00339354
nn Allows small spacing and edge distances: Low expansion forces nn Fastenings subject to dynamic loading, e.g. fatigue, seismic or
- performs like a cast-in headed stud shock Undercut anchor HDA-TR 30-M16x190/60 30 mm 203 mm 295 mm 60 mm 4 pc 00339355
nn Simple installation: No complicated specialized undercutting nn Heavy-duty fastenings under high tensile or shear loads
tools required
nn Load can be applied immediately after setting Base Material
nn Fully removable nn Concrete (cracked), Concrete (non-cracked)
Setting Tool
TE-C-HDA-ST/ TE-Y-HDA-ST
8
Ordering
Ordering
Material: Steel grade 8.8
Order designation Drill bit diameter Anchor length Thickness fastened - max Minimum order quantity Item Number
Order Description Package quantity Item Number
Undercut anchor HDA-P 20-M10x100/20 20 mm 150 mm 20 mm 12 pc 00331544 Setting tool TE-C-HDA-ST20-M10 1 pc 00331843
Undercut anchor HDA-P 22-M12x125/30 22 mm 190 mm 30 mm 8 pc 00331546 Setting tool TE-C-HDA-ST22-M12 1 pc 00331844
Undercut anchor HDA-P 22-M12x125/50 22 mm 210 mm 50 mm 8 pc 00331547 Setting tool TE-Y HDA-ST 20-M10 1 pc 00287133
Undercut anchor HDA-P 30-M16x190/40 30 mm 275 mm 40 mm 4 pc 00331550 Setting tool TE-Y HDA-ST 22-M12 1 pc 00287134
Undercut anchor HDA-P 30-M16x190/60 30 mm 295 mm 60 mm 4 pc 00331551 Setting tool TE-Y-HDA ST30-M16 1 pc 00331846
Undercut anchor HDA-P 37-M20x250/50 37 mm 360 mm 50 mm 2 pc 00339265 Setting tool TE-Y-HDA-ST37-M20 1 pc 00339269
Undercut anchor HDA-P 37-M20x250/100 37 mm 410 mm 100 mm 2 pc 00339266
Undercut anchor HDA-T 20-M10x100/20 20 mm 150 mm 20 mm 12 pc 00331545
Undercut anchor HDA-T 22-M12x125/30 22 mm 190 mm 30 mm 8 pc 00331548
Undercut anchor HDA-T 22-M12x125/50 22 mm 210 mm 50 mm 8 pc 00331549
Undercut anchor HDA-T 30-M16x190/40 30 mm 275 mm 40 mm 4 pc 00331552
Undercut anchor HDA-T 30-M16x190/60 30 mm 295 mm 60 mm 4 pc 00331553
Undercut anchor HDA-T 37-M20x250/50 37 mm 360 mm 50 mm 2 pc 00339267
Undercut anchor HDA-T 37-M20x250/100 37 mm 410 mm 100 mm 2 pc 00339268
Ordering
Order Description Package quantity Item Number
Dynamic Set
HVZ/HDA
8
Ordering
Material: Carbon steel, Bolt: 8.8 grade
Order designation Drill bit diameter Min. hole depth Anchor length Thickness fastened - max Minimum order quantity Item Number
Ordering Heavy-duty anchor HSL-3 M8/5 12 mm 80 mm 83 mm 5 mm 40 pc 00371774
Order Description Package quantity Item Number Heavy-duty anchor HSL-3 M8/20 12 mm 80 mm 98 mm 20 mm 40 pc 00371775
Dynamic set M10 2 pc 00369201 Heavy-duty anchor HSL-3 M8/40 12 mm 80 mm 118 mm 40 mm 40 pc 00371776
Dynamic set M16 2 pc 00369203 Heavy-duty anchor HSL-3 M10/20 15 mm 90 mm 110 mm 20 mm 20 pc 00371778
Dynamic set M20 2 pc 00369204 Heavy-duty anchor HSL-3 M10/40 15 mm 90 mm 130 mm 40 mm 20 pc 00371779
Heavy-duty anchor HSL-3 M12/5 18 mm 105 mm 111 mm 5 mm 20 pc 00371780
Heavy-duty anchor HSL-3 M12/25 18 mm 105 mm 131 mm 25 mm 20 pc 00371781
Heavy-duty anchor HSL-3 M12/50 18 mm 105 mm 156 mm 50 mm 10 pc 00371782
Heavy-duty anchor HSL-3 M16/10 24 mm 125 mm 138 mm 10 mm 10 pc 00371783
Heavy-duty anchor HSL-3 M16/25 24 mm 125 mm 153 mm 25 mm 10 pc 00371784
Heavy-duty anchor HSL-3 M16/50 24 mm 125 mm 178 mm 50 mm 10 pc 00371785
Heavy-duty anchor HSL-3 M20/10 28 mm 155 mm 163 mm 10 mm 6 pc 00371786
Heavy-duty anchor HSL-3 M20/30 28 mm 155 mm 183 mm 30 mm 6 pc 00371787
Heavy-duty anchor HSL-3 M20/60 28 mm 155 mm 213 mm 60 mm 6 pc 00371788
Heavy-duty anchor HSL-3 M24/10 32 mm 180 mm 185 mm 10 mm 4 pc 00371789
Heavy-duty anchor HSL-3 M24/30 32 mm 180 mm 205 mm 30 mm 4 pc 00371790
Heavy-duty anchor HSL-3 M24/60 32 mm 180 mm 235 mm 60 mm 4 pc 00371791
Ordering
Material: Steel strength 8.8 zinc plated 5 microns thick 8
Order designation Drill bit diam- Hole depth Anchor length Thickness fas- Minimum order Item Number
Material: A4 stainless steel (material 1.4401/ AISI 3116) eter tened - max quantity
Order designation Drill bit diam- Hole depth Anchor length Thickness fas- Minimum order Item Number Safety anchor HSC-A M8x40/15 14 mm 46 mm 71.5 mm 15 mm 25 pc 00031139
eter tened range quantity
Safety anchor HSC-A M8x50/15 14 mm 56 mm 81.5 mm 15 mm 25 pc 00031141
Heavy-duty anchor HSLGR M8/20 12 mm 80 mm 102 mm 20mm 40 pc 00067920
Safety anchor HSC-A M10x40/20 16 mm 46.5 mm 79.5 mm 20 mm 25 pc 00031140
Heavy-duty anchor HSLGR M10/20 15 mm 90 mm 115 mm 20mm 20 pc 00067922
Safety anchor HSC-A M12x60/20 18 mm 68 mm 103.5 mm 20 mm 20 pc 00015507
Heavy-duty anchor HSLGR M12/25 18 mm 100 mm 139 mm 25mm 20 pc 00067924
Heavy-duty anchor HSLGR M16/25 24 mm 125 mm 163 mm 25mm 10 pc 00067926
Self-Undercutting Safety Anchor
Heavy-duty anchor HSLGR M20/30 28 mm 155 mm 190 mm 30mm 6 pc 00067928
HSC-AR
Material: Carbon steel, Screws: 8.8 grade Safety anchor HSC-AR M8x40/15 14 mm 46 mm 71.5 mm 15 mm 25 pc 00031148
Order designation Drill bit diameter Min. hole depth Anchor length Thickness fastened Minimum order Item Number Safety anchor HSC-AR M8x50/15 14 mm 56 mm 81.5 mm 15 mm 25 pc 00031150
range quantity
Safety anchor HSC-AR M10x40/20 16 mm 46.5 mm 79.5 mm 20 mm 25 pc 00031149
Heavy-duty anchor HSL-3-SK M8/10 12 mm 80 mm 80 mm 10mm 40 pc 00371825
Safety anchor HSC-AR M12x60/20 18 mm 68 mm 103.5 mm 20 mm 20 pc 00015506
Heavy-duty anchor HSL-3-SK M8/20 12 mm 80 mm 90 mm 20mm 40 pc 00371826
Heavy-duty anchor HSL-3-SK M10/20 15 mm 90 mm 102 mm 20mm 20 pc 00371827
Heavy-duty anchor HSL-3-SK M12/25 18 mm 105 mm 120 mm 25mm 20 pc 00371828
TE 40
HSC-A M10 40/20 31140
Material: Stainless steel A4 HSC-AR M10 40/20 31149
Order designation Drill bit diameter Hole depth Anchor length Thread engagement Minimum or- Item Number
depth - range der quantity TE-C-HSC-MW 16 11267 TE-C-HSC-B 16/40 28568
Safety anchor HSC-IR M6x40 14 mm 46 mm 43.3 mm 6 mm - 16 mm 25 pc 00031151
Safety anchor HSC-IR M8x40 16 mm 46.6 mm 43.8 mm 8 mm - 22 mm 25 pc 00031152 HSC-I M8 40 31143 EW 16 (*)
HSC-IR M8 40 31152
Safety anchor HSC-IR M10x50 18 mm 56 mm 54.8 mm 10 mm - 28 mm 25 pc 00031153
Safety anchor HSC-IR M10x60 18 mm 68 mm 64.8 mm 10 mm - 28 mm 25 pc 00031154
Safety anchor HSC-IR M12x60 20 mm 68.5 mm 64.8 mm 12 mm - 30 mm 25 pc 00031155
Setting tool TE-C-HSC-MW14 14 mm Internal threaded HSC-I(IR) M6, External threaded HSC-A(AR) M8 1 pc 00031169
Setting tool TE-C-HSC-MW16 16 mm Internal threaded HSC-I(IR) M8, External threaded HSC-A(AR) M10 1 pc 00011267 HSC-I M10/50 31144 EW 18 (*) TE-C-HSC-MW 18 71352 TE-C-HSC-B 18/50 30708
Setting tool TE-C HSC-MW18 18 mm External threaded HSC-A(AR) M12, Internal threaded HSC-I(IR) M10 1 pc 00071352 HSC-IR M10/50 31153 TE 40
Setting tool TE-C-HSC-MW20 20 mm Internal threaded HSC-I(IR) M12 1 pc 00071353
Order Description Diameter For use with Package quantity Item Number
Stop drill bit TE-C HSC-B 14/40 14 mm HSC-A(R) M8x40/15, HSC-I(R) M6x40 1 pc 00031157
Stop drill bit TE-C HSC-B 14/50 14 mm HSC-A(R) M8x50/15 1 pc 00031158
Stop drill bit TE-C HSC-B 16/40 16 mm HSC-A(R) M10x40/20, HSC-I(R) M8x40 1 pc 00028568
Stop drill bit TE-C HSC-B 18/50 18 mm HSC-I(R) M10x50 1 pc 00030708
Stop drill bit TE-C HSC-B 18/60 18 mm HSC-I(R) M10x60, HSC-A(R) M12x60/20 1 pc 00030709
Stop drill bit TE-C HSC-B 20/60 20 mm HSC-i(R) M12x60 1 pc 00030710
Stud Anchor
HST-R
Features and Benefits Fields of Application Order designation Drill bit diam-
eter
Hole depth Anchor length Thickness fas-
tened - max
Minimum order
quantity
Item Number
nn The optimised design of expansion cone and wedge, combined nn Attaching structural steel, façade, hand rails, racks, mechanical Safety stud anchor HST-R M8X75/10 8 mm 65 mm 75 mm 10 mm 50 pc 00376039
with special steel and coatings, ensure outstanding performance equipment, pipe supports, elevators etc. to cracked and non-
in cracked and non-cracked concrete. cracked concrete. Particularly suited for safety relevant applica- Safety stud anchor HST-R M8X95/30 8 mm 65 mm 95 mm 30 mm 50 pc 00376041
nn Excellent permitted edge and spacing distances tion. Safety stud anchor HST-R M8X115/50 8 mm 65 mm 115 mm 50 mm 50 pc 00376042
nn Comprehensive product offering includes a large variety of sizes nn Through fastener for wood angles channels and columns in con- Safety stud anchor HST-R M10X90/10 10 mm 80 mm 90 mm 80 mm 50 pc 00376043
(from M8 to M24) and materials (carbon steel zinc plated, A4/ crete and hard stone
Safety stud anchor HST-R M10X110/30 10 mm 80 mm 110 mm 20 mm 50 pc 00376044
316 stainless steel, and HCR 1.4529 - high corrosion resistant)
for a variety of applications Base Material Safety stud anchor HST-R M10X130/50 10 mm 80 mm 130 mm 50 mm 25 pc 00376045
nn Mechanical expansion allows immediate load application and nn Concrete (cracked), Concrete (non-cracked) Safety stud anchor HST-R M10X160/80 10 mm 80 mm 160 mm 90 mm 25 pc 00376046
can be installed through the fixture, improving productivity Safety stud anchor HST-R M12X115/20 12 mm 95 mm 115 mm 120 mm 25 pc 00376047
Safety stud anchor HST-R M12X145/50 12 mm 95 mm 145 mm 25 mm 25 pc 00376048
Safety stud anchor HST-R M12X185/90 12 mm 95 mm 185 mm 50 mm 25 pc 00376049
Safety stud anchor HST-R M12X215/120 12 mm 95 mm 215 mm 100 mm 25 pc 00376050
Safety stud anchor HST-R M16X140/25 16 mm 115 mm 140 mm 140 mm 12 pc 00376051
Safety stud anchor HST-R M16X165/50 16 mm 115 mm 165 mm 180 mm 12 pc 00376052
Safety stud anchor HST-R M16X215/100 16 mm 115 mm 215 mm 30 mm 12 pc 00376053
Safety stud anchor HST-R M16X255/140 16 mm 115 mm 255 mm 60 mm 12 pc 00376054
Safety stud anchor HST-R M16X295/180 16 mm 115 mm 295 mm 30 mm 12 pc 00376055
Safety stud anchor HST-R M20X170/30 20 mm 140 mm 170 mm 60 mm 5 pc 00376056 8
Safety stud anchor HST-R M20X200/60 20 mm 140 mm 200 mm 10 mm 5 pc 00376057
Ordering Safety stud anchor HST-R M24X200/30 24 mm 170 mm 200 mm 10 mm 5 pc 00376058
Material: Carbon steel Safety stud anchor HST-R M24X230/60 24 mm 170 mm 230 mm 20 mm 5 pc 00376059
Order designation Drill bit diam- Hole depth Anchor length Thickness fas- Minimum order Item Number
eter tened - max quantity
Stud Anchor
HSA-R
Order designation Drill bit diam- Hole depth Anchor length Thickness fas- Minimum order Item Number
eter tened - max quantity
Order designation Drill bit Hole depth Anchor length Standard Internal Minimum or- Item Number
diameter embedment thread size der quantity
Ordering depth
Flush Anchor
Machine setting tool
HKD-SR
HSD-M
Order designation Hole depth Drill bit Anchor length Standard Internal Minimum or- Item Number Order designation For use with Minimum order Item Number
diameter embedment thread size der quantity quantity
depth
Stop drill bit TE-CX-HKD-B 8/27 TE 2-TE 40 1 pc 00433771
Flush anchor HKV M6x25 27 mm 8 mm 25 mm 25 mm M6 100 pc 00384616
Stop drill bit TE-CX-HKD-B 10/27 TE 2-TE 40 1 pc 00433772
Flush anchor HKV M8x30 33 mm 10 mm 30 mm 30 mm M8 100 pc 00384966
Stop drill bit TE-CX-HKD-B 10/33 TE 2-TE 40 1 pc 00433773
Flush anchor HKV M10x30 33 mm 12 mm 30 mm 30 mm M10 50 pc 00384968
Stop drill bit TE-CX-HKD-B 10/44 TE 2-TE 40 1 pc 00433774
Flush anchor HKV M10x40 44 mm 12 mm 40 mm 40 mm M10 50 pc 00384969
Stop drill bit TE-CX-HKD-B 12/27 TE 2-TE 40 1 pc 00433775
Flush anchor HKV M12x50 55 mm 15 mm 50 mm 50 mm M12 25 pc 00384971
Stop drill bit TE-CX-HKD-B 12/33 TE 2-TE 40 1 pc 00433776
Flush anchor HKV M16x65 70 mm 20 mm 65 mm 65 mm M16 25 pc 00384973
Stop drill bit TE-CX-HKD-B 12/44 TE 2-TE 40 1 pc 00433777
8
Stop drill bit TE-CX-HKD-B 15/27 TE 2-TE 40 1 pc 00433778
Stop drill bit TE-CX-HKD-B 15/55 TE 2-TE 40 1 pc 00433779
Hand setting tool
HSD-G
Setting tool / Stop drill bit
HKD-TE-CX
Aerated concrete anchor HPD M8/10 8 mm 62 mm 10 mm 25 pc 00373476 Sleeve anchor HLC 6,5x40/20 6.5 mm 30 mm 40 mm 20 mm 100 pc 00385812
Aerated concrete anchor HPD M8/20 8 mm 62 mm 20 mm 25 pc 00373477 Sleeve anchor HLC 6,5x60/40 6.5 mm 30 mm 60 mm 40 mm 100 pc 00385813
Aerated concrete anchor HPD M10/10 10 mm 62 mm 10 mm 25 pc 00373478 Sleeve anchor HLC 8x40/10 8 mm 40 mm 40 mm 10 mm 100 pc 00385814
Aerated concrete anchor HPD M10/30 10 mm 62 mm 30 mm 25 pc 00373479 Sleeve anchor HLC 8x55/25 8 mm 40 mm 55 mm 25 mm 100 pc 00385816
Sleeve anchor HLC 8x70/40 8 mm 40 mm 70 mm 40 mm 100 pc 00385817
Sleeve anchor HLC 8x85/55 8 mm 40 mm 85 mm 55 mm 100 pc 00385818
Sleeve anchor HLC 10x40/5 10 mm 50 mm 40 mm 5 mm 50 pc 00385819
Sleeve anchor HLC 10x50/15 10 mm 50 mm 50 mm 15 mm 50 pc 00385820 8
Sleeve anchor HLC 10x60/25 10 mm 50 mm 60 mm 25 mm 50 pc 00385822
Sleeve anchor HLC 10x80/45 10 mm 50 mm 80 mm 45 mm 50 pc 00385823
Sleeve anchor HLC 10x100/65 10 mm 50 mm 100 mm 65 mm 50 pc 00385824
Sleeve anchor HLC 12x55/15 12 mm 65 mm 55 mm 15 mm 50 pc 00385825
Sleeve anchor HLC 12x75/35 12 mm 65 mm 75 mm 35 mm 50 pc 00385827
Sleeve anchor HLC 12x100/60 12 mm 65 mm 100 mm 60 mm 25 pc 00385829
Sleeve anchor HLC 16x60/10 16 mm 75 mm 60 mm 10 mm 25 pc 00385830
Sleeve anchor HLC 16x100/50 16 mm 75 mm 100 mm 50 mm 10 pc 00385831
Sleeve anchor HLC 16x140/90 16 mm 75 mm 140 mm 90 mm 10 pc 00385832
Sleeve anchor HLC 20x80/25 20 mm 85 mm 80 mm 25 mm 10 pc 00385833
Sleeve anchor HLC 20x115/60 20 mm 85 mm 115 mm 60 mm 10 pc 00385834
Sleeve anchor HLC 20x150/95 20 mm 85 mm 150 mm 95 mm 10 pc 00385835
Sleeve anchor HLC-A 10x35 10 mm 50 mm 35 mm 80 mm 50 pc 00385879 Sleeve anchor HLC-SK 6,5x45/20 * 6.5 mm 30 mm 45 mm 20 mm 100 pc 00385856
Sleeve anchor HLC-A 12x48 12 mm 65 mm 48 mm 100 mm 50 pc 00385880 Sleeve anchor HLC-SK 6,5x65/40 * 6.5 mm 30 mm 65 mm 40 mm 100 pc 00385857
Sleeve anchor HLC-A 16x100 16 mm 75 mm 100 mm 5 mm 10 pc 00385881 Sleeve anchor HLC-SK 6,5x85/60 * 6.5 mm 30 mm 85 mm 60 mm 100 pc 00385858
Sleeve anchor HLC-A 16x160 16 mm 75 mm 160 mm 15 mm 10 pc 00385882 Sleeve anchor HLC-SK 8x60/25 * 8 mm 40 mm 60 mm 25 mm 100 pc 00385859
Sleeve anchor HLC-SK 8x75/40 * 8 mm 40 mm 75 mm 40 mm 100 pc 00385860
Sleeve anchor HLC-SK 8x90/55 * 8 mm 40 mm 90 mm 55 mm 100 pc 00385861
Sleeve Anchor Sleeve anchor HLC-SK 10x45/5 * 10 mm 50 mm 45 mm 5 mm 50 pc 00385862
HLC-EC Sleeve anchor HLC-SK 10x85/45 * 10 mm 50 mm 85 mm 45 mm 50 pc 00385863
Sleeve anchor HLC-SK 10x105/65 * 10 mm 50 mm 105 mm 65 mm 50 pc 00385864
Sleeve anchor HLC-SK 10x130/95 * 10 mm 50 mm 130 mm 95 mm 25 pc 00385865
Sleeve anchor HLC-SK 12x80/35 * 12 mm 65 mm 80 mm 35 mm 50 pc 00385866
Sleeve Anchor
HLC-T
Sleeve Anchor
HLC-EO
Screw Anchor
Universal Screw Anchor HUS-HF
HUS-H 8 + 10 + 14
Simply drill and drive! Galvanized version.
Material: A4 316
Order designation Special Item Drill bit Hole depth Anchor length Thickness fas- Package Item Number
diameter tened - max quantity
Ordering
Material: Steel acc. to DIN EN 10263-4, 1.5523 8
Order designation Drill bit diameter Anchor length Thickness fastened - max Minimum order quantity Item Number
Features and Benefits Fields of Application Features and Benefits Fields of Application
nn Directly driven into base material nn Fastening door frames, window frames, strips, wood battens etc nn Significant time saving over the total installation compared with nn Various pipe and ventilation duct fastening applications
nn No additional steps required nn Installing temporary forming boards traditional anchor types nn Suspension of single or multiple pipes
nn Big productivity gains and labour savings nn Fastening air-conditioning ducts nn Less drilling and convenient overhead installation nn Ideal for repetitive fastening jobs
nn Minimal expansion forces in base material nn Securing cable holders, clips and pipe rings nn Lower inventory thanks to M8 / M10 dual connection boss - one
nn Reduced edge distance and spacing
product for 2 diameters Base material
Base Material nn Efficient cutting edges for a powerful hold in concrete nn Concrete
nn Concrete block (solid), Concrete (gas), Concrete (cracked), Brick
(solid), Brick (hollow)
mm
mm
???
mm
mm
mm
???
min. 0 mm min. 40 mm min. 0 mm
???
Ordering
Material: Carbon steel
8
???
???
Order designation Drill bit diameter Hole depth Anchor length Minimum order Item Number
quantity
???
Ordering
Material: carbon steel, zinc plated to 5 microns
Order designation Special Item Drill bit diameter Anchor length Thickness fastened - max Minimum order Item Number
quantity
HUS Universal
HUS-HF
HUS-H
HUS-A
HUS-S
Order Description Item
Number
Bit holder S-BH 1/2 “ 1/4” 00369096
n n n
8
Y
LIFETIME NO
SERVICE COSTS
L L
REPAIR MANUFACTURERS
COST LIMIT WARRANTY
Ordering Ordering
Order Description Package content Item Number
Order Description Package content Item Number
Impact screwdriver SI 100 110V GB cas SI 100, 110V, Hilti case, GB plug. 00334202
Impact screwdriver TKI 2500 230V cas TKI 2500, 230V, Supplied in a plastic case with S-BH 50m bit holder, S-B TXI 40 00235067
Impact screwdriver SI 100 230V SI 100, 230V, Hilti case, EU plug. 00334204 torx bit and operating instructions.
Features and Benefits Fields of Application Features and Benefits Fields of Application
nn No risk of distortion or forces of constraint nn Fastening door and window frames nn Prefitted screw nn Securing support frames, timber frames for light stand-off clad-
nn Ergonomic setting tool for thread size M4 to M8 ding, facade panels, curtain wall
nn Expansion cone cannot be lost
Base Material nn Quick and trouble-free installation nn Fastening window and door frames
ls ls
1 2 3 4
d0
d0
h tfix h tfix
3 4
Ordering
Ordering
Order designation Drill bit diameter Hole depth Anchor length Thickness fastened Minimum order Item Number
Material: Screw: Carbon Steel 4.8, zink plated 5 microns, Anchor - max quantity
Sleeve: Steel DIN 17162, zinc plated 20µ
Cavity anchor HHD-S M4/4X20 8 mm 4 mm 20 mm 4 mm 100 pc 00332060 8
Order designation Special Item Hole depth Drill bit Anchor Thickness fastened Minimum order Item Number Cavity anchor HHD-S M4/6X32 8 mm 32 mm 32 mm 6 mm 100 pc 00332061
diameter length - max quantity
Cavity anchor HHD-S M4/12X38 8 mm 38 mm 38 mm 12 mm 100 pc 00332062
Metal frame anchor HT 8X72 40 mm 8 mm 72 mm 80 mm 100 pc 00369257
Cavity anchor HHD-S M4/19X45 8 mm 45 mm 45 mm 19 mm 50 pc 00332063
Metal frame anchor HT 10X72 40 mm 10 mm 72 mm 100 mm 100 pc 00369263
Cavity anchor HHD-S M5/8X38 10 mm 38 mm 38 mm 8 mm 100 pc 00332065
Metal frame anchor HT 10X92 40 mm 10 mm 92 mm 120 mm 100 pc 00369264
Cavity anchor HHD-S M5/12X52 10 mm 52 mm 52 mm 12 mm 50 pc 00332066
Metal frame anchor HT 10X112 40 mm 10 mm 112 mm 150 mm 100 pc 00369265
Cavity anchor HHD-S M5/25X65 10 mm 65 mm 65 mm 25 mm 50 pc 00332067
Metal frame anchor HT 10X132 40 mm 10 mm 132 mm 30 mm 100 pc 00369266
Cavity anchor HHD-S M6/9X38 12 mm 38 mm 38 mm 9 mm 1 pc 00332069
Metal frame anchor HT 10X152 40 mm 10 mm 152 mm 60 mm 100 pc 00369267
Cavity anchor HHD-S M6/12X52 12 mm 52 mm 52 mm 12 mm 50 pc 00332070
Metal frame anchor HT 10X182 40 mm 10 mm 182 mm 90 mm 100 pc 00369268
Cavity anchor HHD-S M6/24X65 12 mm 65 mm 65 mm 24 mm 50 pc 00332071
Metal frame anchor HT 10X202 40 mm 10 mm 202 mm 120 mm 100 pc 00369269
Cavity anchor HHD-S M6/40X80 12 mm 80 mm 80 mm 40 mm 50 pc 00332072
Metal frame anchor HT 8KX92 * 40 mm 8 mm 92 mm 150 mm 100 pc 00369374
Cavity anchor HHD-S M8/12X54 12 mm 54 mm 54 mm 12 mm 50 pc 00332073
Metal frame anchor HT 8KX112 * 40 mm 8 mm 112 mm 30 mm 100 pc 00369375
Cavity anchor HHD-S M8/24X66 12 mm 24 mm 66 mm 24 mm 50 pc 00332074
Metal frame anchor HT 8KX132 * 40 mm 8 mm 132 mm 60 mm 100 pc 00369376
Cavity anchor HHD-S M8/40X83 12 mm 83 mm 83 mm 40 mm 50 pc 00332075
Metal frame anchor HT 10LX112 * 40 mm 10 mm 90 mm 100 pc 00369378
Metal frame anchor HT 10LX132 * 40 mm 10 mm 132 mm 92 mm 100 pc 00369379
Metal frame anchor HT 10LX152 * 40 mm 10 mm 152 mm 112 mm 100 pc 00369380
Features and Benefits Fields of Application Features and Benefits Fields of Application
nn Anchor body made of high-grade polyamide material nn Cladding/ facade installation (metal frames/ structures)
nn Setting by impact expansion nn Suspensions from concrete ceilings attaching slit-steel straps,
punched band, nonius system hanger or wood battens nn High holding power, thus fewer fastenings, less installation work nn Metal construction (installing metal parts)
nn Automatic follow-up expansion, thus safe fastening
and lower costs nn Roofing installation
nn Fastening of lathes (DBZ 6/35)
Base Material nn Fastening door and windows frames
nn Fire resistance
nn Concrete (cracked), Concrete (non-cracked)
Base Material
nn Concrete (cracked), Concrete (non-cracked), Stone (hard natural),
Brick (hollow), Brick (solid), Brick (sand-lime)
Ordering
Material: Galvanized steel / Polyamide PA 6
Order designation Drill bit diam- Hole depth Anchor length Thickness fas- Minimum order Item Number
eter tened - max quantity
Setting Tool
HHD
Plastic Frame Anchor, Universal Plastic Frame Anchor, Short Embedment, Universal
HRD-URT
HRD-SGS
The best frame anchor worldwide in it`s short embedment version mainly for solid base material. Hex head, 13 mm.
Material: Stainless steel/ Polyamide PA 6
Order designation Drill bit diam- Hole depth Anchor length Thickness fas- Minimum order Item Number
eter tened - max quantity
Ordering
Material: Galvanized steel / Polyamide PA 6
Order designation Drill bit diam- Hole depth Anchor length Thickness fas- Minimum order Item Number
eter tened - max quantity
10 mm
quantity
1 pc 00312622
Frame anchor HRD-SGS 10X120/70 10 mm 60 mm 120 mm 70 mm 50 pc 00331509
8
Frame anchor HRD-SGS 10X140/90 10 mm 60 mm 140 mm 90 mm 50 pc 00331510
Frame anchor HRD-UGT 14X110/40 80 mm 14 mm 40 mm 1 pc 00312623 Frame anchor HRD-SGS 10X160/110 10 mm 60 mm 160 mm 110 mm 50 pc 00331511
Frame anchor HRD-UGT 14X140/70 80 mm 14 mm 70 mm 1 pc 00312624
Frame anchor HRD-UGT 14X160/90 80 mm 14 mm 90 mm 1 pc 00312625 Frame Anchor, Short, Universal
Frame anchor HRD-UGT 14X180/110 80 mm 14 mm 110 mm 1 pc 00312626 HRD-SGT 10
Countersunk head, Torx T40.
Plastic Frame Anchor, Short Embedment Features and Benefits Fields of Application
HRD-SRT nn Quick setting: Simple hammer it in, even in poorly accessible nn Wooden laths/ timber battens, drywall studs, framing, metal sec-
places tions and mouldings, electrical installation components, mechani-
nn An anchor for many applications, e.g. for electrical installations, cal installations (plumbing/ pipe fitting), cable trunking, pipe rings,
for roof, interior finishing and wall extensions, in building con- sheeting/ foils
struction, for mechanical installations and fastening wood
nn Simple removal using a screwdriver equipped with a cross- Base Material
recess bit nn Concrete (non-cracked), Concrete (light)
Material: Stainless steel A4/ Polyamide PA 6
nn Reduced hole and setting depths (up to 20 mm less)
Order designation Drill bit diam- Hole depth Anchor length Thickness fas- Minimum order Item Number
eter tened - max quantity nn Trouble free setting thanks to high-quality material, even in
extremely cold or dry conditions
Frame anchor HRD-SRT 10X60/10 10 mm 60 mm 60 mm 10 mm 50 pc 00331513
Frame anchor HRD-SRT 10X100/50 10 mm 60 mm 100 mm 50 mm 50 pc 00331514
Frame anchor HRD-SRT 10X140/90 10 mm 60 mm 140 mm 90 mm 50 pc 00331515
Accessories
HRD-UGT
HRD-SGT
8
Setting operations
Order Description Item
Number
Cover cap HKF d.brown 00246782
n n
Cover cap HKF l.brn. n n 00246781 Solid base material: setting with a hammer.
8
eter tened - max quantity
Technical data: HUD-1
Impact anchor HPS-1 R 5/5X25 5 mm 30 mm 27 mm 5 mm 200 pc 00260357 Recommended load, L rec (kN)
Impact anchor HPS-1 R 5/10X30 5 mm 30 mm 32 mm 10 mm 200 pc 00230524 Anchor size 5x25 6x30 8x40 10x50 12x60 14x70
Concrete f cc 30 N/mm2 Tensile N Rec 0.3 0.55 0.85 1.4 2.0 3.0
Impact anchor HPS-1 R 5/15X35 5 mm 40 mm 37 mm 15 mm 200 pc 00260358
Shear V Rec 0.4 0.9 1.25 2.2 3.0 5.6
Impact anchor HPS-1 R 6/0X25 6 mm 40 mm 27 mm 2 mm 150 pc 00238161 Solid brick f cc 20 N/mm2 Tensile N Rec 0.17 0.35 0.6 0.8 1.0 1.0
Impact anchor HPS-1 R 6/5X30 6 mm 40 mm 32 mm 5 mm 150 pc 00260359 Shear V Rec 0.24 0.3 0.44 – – –
Impact anchor HPS-1 R 8/60X90 8 mm 50 mm 92.5 mm 60 mm 50 pc 00260365 Universal anchor HUD-1 5 5 mm 25 mm 200 pc 00338708
Impact anchor HPS-1 R 8/80X110 8 mm 50 mm 112.5 mm 80 mm 50 pc 00260366 Universal anchor HUD-1 5X25 5 mm 25 mm 500 pc 00331615
Universal anchor HUD-1 6 6 mm 30 mm 200 pc 00338709
Universal anchor HUD-1 6X30 6 mm 30 mm 500 pc 00331616
Universal anchor HUD-1 8 8 mm 40 mm 200 pc 00338710
Universal anchor HUD-1 8X40 8 mm 40 mm 400 pc 00331617
Universal anchor HUD-1 10 10 mm 50 mm 100 pc 00338711
Universal anchor HUD-1 10X50 10 mm 50 mm 200 pc 00331618
Universal anchor HUD-1 12X60 12 mm 60 mm 100 pc 00331619
Universal anchor HUD-1 14X70 14 mm 70 mm 50 pc 00331620
Material: Polyamide PA 6
Order designation Drill bit diameter Hole depth Anchor length Minimum order quantity Item Number
8
Technical data: HLD
Recommended load, L rec (kN)
Working Size of Anchor
principle HLD-2 HLD-3 HLD-4
Concrete f cc 15 N/mm2 C 0.25 0.4 0.5
Drywall Panel B 0.08 0.08 0.08
Fibre reinforced gypsum panel 12.5mm A 0.1 – –
Fibre reinforced gypsum panel 2 x 12.5mm B – 0.2 –
Hollow brick A / B 0.15 0.15 0.15
Woodwool panel A – 0.05 0.05
Ordering
Material: Polyamide PA 6
Order designation Drill bit diameter Hole depth Anchor length Minimum order quantity Item Number
Features and Benefits Fields of Application Features and Benefits Fields of Application
nn Excellent bonding of plaster on specially structured fastener nn Fastening of hard, self-supporting insulating materials, such as
nn Reliable and simple expansion nn For fastening hard, self-supporting, insulation materials such as
head expanded polystyrene
nn Insensitive against bore dust expanded polystyrene
nn Specially structured head helps ensure bonding of plaster ap- nn Black fibre-reinforced hammer-in plastic insulation fastener for all
nn Universal use for most common base materials plied directly over the anchor light applications where black colour is required for aesthetical
Base Material
nn High tech in thermal conductivity nn Suitable for insulation thickness up to 150 mm for enhanced reasons
nn Brick (solid), Brick (hollow), Concrete (cracked), Concrete (non-
nn Hammer setting versatility
cracked), Concrete (light)
Base Material
nn Concrete block (solid), Brick (solid), Brick (hollow)
Setting instructions
Ordering
Material: Body: Polypropylene, Expansion Pin: Fibre reinforced Polypropylene
Technical data 0/3 3/6 6/9 9/12 12/15
Order designation Drill bit diameter Hole depth Anchor length Thickness fas- Minimum order Item Number do Nominal drill bit diameter (mm) 8 8 8 8 8
tened - max quantity
h1 Min. hole depth (mm) 55 55 55 55 55
Insulation fastener IZ 8x70 8 mm 40 - 80 mm 70 mm 20 mm 250 pc 00378160 tfix Max. fastenable thickness (mm) 30 60 90 120 150
I Fastener length (mm) 80 110 140 170 200
Insulation fastener IZ 8x90 8 mm 40 - 80 mm 90 mm 60 mm 250 pc 00378161
8
Insulation fastener IZ 8x110 8 mm 40 - 80 mm 110 mm 80 mm 200 pc 00378162 NOTE: These figures are given for single anchors without influence from neighbouring anchors or concrete
edges and the conditions
Insulation fastener IZ 8x130 8 mm 40 - 80 mm 130 mm 100 mm 200 pc 00378163 above. Please consult Hilti Fastening Technology Manual for specific design requirements.
Insulation fastener IZ 8x150 8 mm 40 - 80 mm 150 mm 120 mm 150 pc 00378164
Insulation fastener IZ 8x170 8 mm 40 - 80 mm 170 mm 140 mm 150 pc 00378165
Ordering
Insulation fastener IZ 8x190 8 mm 40 - 80 mm 190 mm 160 mm 100 pc 00378166 Material: Polypropylene
Insulation fastener IZ 8x210 8 mm 40 - 80 mm 210 mm 180 mm 100 pc 00378167 Order designation Drill bit diam- Hole depth Anchor length Thickness fas- Minimum order Item Number
eter tened - max quantity
Ordering
Material: Sheet steel, sendzimir zinc plated to approx. 16µm
Order designation Drill bit diam- Hole depth Anchor length Thickness fas- Minimum order Item Number
Material: Zinc plated steel
Order designation Hole depth Anchor length Thickness fas- Minimum order Item Number
8
eter tened - max quantity tened - max quantity
Insulation mandrel IDMS 0/ 3 8 mm 55 mm 80 mm 30 mm 250 pc 00065752 Drywall anchor HSP 39 mm 100 pc 00332682
Insulation mandrel IDMS 3/ 6 8 mm 60 mm 110 mm 60 mm 250 pc 00065753 Drywall anchor HSP 1/4” 39 mm 100 pc 00333557
Insulation mandrel IDMS 6/ 9 8 mm 60 mm 140 mm 90 mm 250 pc 00065754 Drywall anchor HSP-F7 39 mm 100 pc 00332685
Insulation mandrel IDMS 9/12 8 mm 60 mm 170 mm 120 mm 150 pc 00065725 Drywall anchor HSP-M6 39 mm 100 pc 00332684
Insulation mandrel IDMS 12/15 8 mm 60 mm 200 mm 150 mm 150 pc 00045358 Drywall anchor HSP-S 39 mm 100 pc 00332683
Accessories
HSP
HFP
Order Description Item
Number
Screwdriver bit D-B PH2 HSP/HFP 00332688
n n