Professional Documents
Culture Documents
Menu
So you, like many others, have a 2011 MacBook Pro with video issues. This is normally lines on screen, stripes on screen,
sometimes even black screen or blank screen.
The bad news, your GPU is failing. There is a widely known defect in the Radeon GPUs on these MacBook Pro models. You are
not going to be able to fix the GPU. You can extend its life for a few weeks with a reflow, or attempt to replace the GPU. Replacing
the GPU is very dangerous (brick warning), and you are just putting another defective unit on your board. The final option is to
replace the logic board. This is insanely expensive, and again, just putting defective parts into service.
Onto the good news. With the removal of an EFI variable and 1 resistor, the GPU will be completely disabled, and you will never
have to worry about it again.
https://realmacmods.com/macbook-2011-radeon-gpu-disable/ 1/9
19/3/2561 Macbook 2011 Radeon GPU Disable - Real Radeongate Solution.
But wait, why would you disable your GPU, you need that thing right?
The 2011 MacBook Pro actually has 2 very capable GPUs inside. 1 is the AMD Radeon, and the other is an Intel GPU. If you know
anything about Intel GPU (and CPU), you know they are extremely reliable. So utilizing the Intel GPU means your GPU is going to
live longer than you will.
Cooling- Your MacBook Pro will run cooler. The Radeon normally pumps out a ton of waste heat. Now your Radeon is not powered
on. No waste heat.
Even better, now you have 2 fans and 2 heatsink pipes dedicated to cooling the Intel GPU/CPU only.
Less fan noise – Since you now have 2 passive cooling systems working on one chip, your fans will run less, and quieter.
Linux Support – Getting Linux running on this MacBook Pro is a nightmare. Normally involves complicated boot arguments to
bypass the AMD Radeon GPU. Guess what, now that it is not there anymore, Ubuntu Linux (and others) boot up natively with no
modifications what so ever.
Battery Life – Now that you don’t have several watts of power turning into waste heat, you now have improved battery life.
No need to modify KEXTs – KEXTs or Kernel Extensions are the Drivers of the OS X world. As far as the OS knows, the AMD chip
is not even there. It will not attempt to load the KEXT for it. Why would it, right?
::We have prepared a vastly simplified automated utility to perform this modification. It is a fully bootable disk image that
includes a script that will run all the terminal steps with one simple command. It also includes a GUI (point and click)
program to create the bootable USB Drive::
The first thing you will need to do is make a small modification to the EFI.
The instructions below use Arch Linux and a strict Terminal environment.
You can permanently disable discrete graphics card following next steps:
You need a working computer for that and a spare CD/DVD/USB drive.
Download the latest Arch Linux ISO image.
https://realmacmods.com/macbook-2011-radeon-gpu-disable/ 2/9
19/3/2561 Macbook 2011 Radeon GPU Disable - Real Radeongate Solution.
Then you could either simply burn this ISO to CD/DVD (which later could be either inserted to MBP’s SuperDrive or External
DVD Drive connected to MBP by two USB cables) or create a bootable USB.
Insert this CD/DVD/USB to Macbook Pro, hold Option key (alt) while booting.
Choose “EFI boot” (that is your bootable installation media).
When the menu shows, press “e” key to edit the GRUB options of the Arch Linux archiso x86_64 UEFI CD menu entry while
it is selected at the main screen, add nomodeset to the end of this line and press Enter.
If everything is done correctly, you will find yourself at the Linux console! (It takes some time so be patient and wait for the
prompt)
Looks like efivarfs filesystem is mounted by default! So you can already cd /sys/firmware/efi/efivars and ls to explore this directory
and see if there is a gpu-power-prefs-... variable (where … is UUID of this variable).
This chattr command is supposed to lock a file to make it accessible only by “superuser” – and so that, while booting, your EFI will
have no chance to screw up your gpu-power-prefs-… variable under any circumstances
`chattr +i "/sys/firmware/efi/efivars/gpu-power-prefs-fa4ce28d-b62f-4c99-9cc3-6815686e30f9"`
https://realmacmods.com/macbook-2011-radeon-gpu-disable/ 3/9
19/3/2561 Macbook 2011 Radeon GPU Disable - Real Radeongate Solution.
cd /
umount /sys/firmware/efi/efivars/
Guarantees that your EFI variables are flushed to efivarfs filesystem. Please unmount it safely before rebooting.
reboot
On this reboot it is essential that you boot once into safe mode (hold Shift throughout boot), and then choose
shutdown(not restart) from the menu.
Do this safe boot with the R8911 resistor in place. Without this SAFE BOOT, the next steps may not work.
The safe boot clears OS level GPU preferences, that may interfere with the following process.
This will now cause your MacBook Pro to stop switching to the Radeon automatically, but it will still draw power, create heat, and be
visible to the OS.
The resistor can also be replaced with a switch, in case you need to turn your radeon back on for any reason.
The resistor in question is R8911 on the 17″ MBP and R8911 on the 15″ MBP
a 1 Ohm resistor that provides a current path to the ISL6263C DC to DC Converter.
https://realmacmods.com/macbook-2011-radeon-gpu-disable/ 4/9
19/3/2561 Macbook 2011 Radeon GPU Disable - Real Radeongate Solution.
This resistor controls power to the Voltage Regulator that provides the Core Voltage to the Radeon GPU. Simply put, no core
voltage, no GPU.
https://realmacmods.com/macbook-2011-radeon-gpu-disable/ 5/9
19/3/2561 Macbook 2011 Radeon GPU Disable - Real Radeongate Solution.
You will find the resistor just to the right of a cooling fan (in the above orientation). It will be near the ISL Voltage converter chip.
This is the chip we will be disabling. (see image for your model)
17″ Board
https://realmacmods.com/macbook-2011-radeon-gpu-disable/ 6/9
19/3/2561 Macbook 2011 Radeon GPU Disable - Real Radeongate Solution.
15″ Board
Just remove it. The preferred method is a professional reflow station, but an iron and a steady hand will get you where you need to
be. If you used flux to remove it (not needed), make sure you clean up with a little Alcohol or other suitable solvent.
That is basically it. Next time you boot up you will notice your GPU defect issue is gone, and you will no longer see the AMD GPU
as installed hardware.
A small warning: It has been tested that this mod will survive a SMC reset as well as Battery Removal. It is not yet known if it will
survive a NVRAM reset. For this (and other security related) reasons, it is recommended that you set an EFI Password. This will
make it impossible to accidentally reset your NVRAM. Just don’t ever forget this password. Seriously, don’t. Ever.
In the event that a NVRAM reset removes the EFI mod, replacing R8911, or even bridging the pads for R8911 will
restore functionality so you can reapply the EFI mod. Really though, lets just stay away from the NVRAM resets. They rarely fix
anything that couldn’t be fixed otherwise anymore.
If you find yourself uncomfortable doing this mod, please contact us and we will be happy to perform this modification for you. Our
current rate is $85 (excluding return shipping). Turn around time depends on shipping speeds, but modification will be performed
within 48 hours of receiving your MacBook Pro.
https://realmacmods.com/macbook-2011-radeon-gpu-disable/ 7/9
19/3/2561 Macbook 2011 Radeon GPU Disable - Real Radeongate Solution.
Subject
Your Message
Send
info@realmacmods.com
RETURN/REFUND POLICY
SHIPPING POLICY
TERMS AND CONDITIONS
PRIVACY POLICY
GET IN TOUCH
WITH US
https://realmacmods.com/macbook-2011-radeon-gpu-disable/ 8/9
19/3/2561 Macbook 2011 Radeon GPU Disable - Real Radeongate Solution.
Feel free to contact us with any questions you may have. We have helped people repair thousands of iMacs with vertical lines, and
want to help you today.
INFO@REALMACMODS.COM
Web Design by IT Elite Computer Service
Affiliates
https://realmacmods.com/macbook-2011-radeon-gpu-disable/ 9/9