Professional Documents
Culture Documents
The Pall Advanta range of filter housings has been specifically designed and
engineered for today’s manufacturing processes. These advanced housings
are manufactured from 316L stainless steel and are engineered to meet the
requirements of the Pharmaceutical, Biotechnology, Cosmetics and Food and
Beverage industries. State-of-the-art manufacturing technologies are used to
construct a housing ideal for the most critical of applications.
Fine filtration of liquids is a key part of many • Quick fit ‘Staubli’-type connections for
production processes. These Pall Advanta easy filter integrity testing
housings have been specifically designed to • Easy to use ‘low point’ sanitary drain
meet the many requirements of this valve
demanding application. During the design • Range of options to aid use in automated
process critical features were optimized to production systems
ensure trouble-free use and low installation • CE marking shows design review to
and maintenance costs. Areas such as surface European Pressure Directive 97/9/EC
finish, suitability for CIP and SIP, integrity testing • Every housing supplied with a quality
and incorporation into automated production certificate and manufactured to ATEX
processes are included: Directive 94/9/EC (Group ll Category 2)
• Variety of connection styles, vents and
Features and Benefits drains offer choice and convenience
• Aseptic design • Filter cartridge accepts single-open-ended
- Crevice-free electropolished surfaces Pall code 7 and code 2 "AB" style
(internal Ra value < 0.4 µm / 15 µin) 127mm (5"), 254mm (10"), 508mm (20")
- Fully self draining and 762mm (30") height filter cartridges
- No dead legs
• Low hold-up volumes for maximum
product recovery
Specification
Maximum Operating Pressure -1 to 10 bar g / -14.5* to 150** psi g
Materials of Construction
Wetted parts AISI 316L stainless steel
Clamp AISI Nitronic 60
O-ring: Silicone - FDA listed
Dimensions Dimensions
Pall Housing Dimension A Dimension B Dimension C
Part Number* mm inch mm inch mm inch
B: Overall height
ALT12G23CBH4 190 7.4 765 30.1 570 22.4
300
4
A: Face to face
250
3
Differential Pressure (mbar)
200
150 2
100
50
0 0
0 10 20 30 40 50 60 70 80 90 100
Flow Rate (Lpm)
** The flow/pressure drop characteristics refer to the empty housing only for water at 20°C (68°F).
For other liquids multiply pressure drop by relative density. To obtain the total pressure drop of a complete
filter assembly, the cartridge pressure drop must be added. Please refer to the relevant filter cartridge literature
or contact Pall.
Pall Advanta Filter Housings
Ordering Information
G23 1" 'Tri-Clamp' compatible to ISO 2852 A Sanitary valve fitting B Sanitary valve with hosebarb
for 'Staübli' type couplings
GNW25 Dairy fitting NW 25 to DIN 11851 D 1
⁄2" Tri-Clamp connection to ISO 2852
C 11⁄2" Tri-Clamp connection to ISO 2852
with side sanitary valve with quick N No drain
GA25 Aseptic thread connection
NW 25 to DIN 11864-1 release fitting for Stäubli type couplings
D 1
⁄2" Tri-Clamp to ISO 2852
G95 Butt weld 33.7 x 2.0 mm to ISO 1127
E Butt weld 13.5 x 1.6 mm to ISO 1127 *Gasket Material - Silicone elastomer
(other materials available upon request - please contact Pall).
ACS0598CM Diaphragm valve for 1⁄2" Tri-Clamp compatible connection (includes clamp
and gasket
ACS0457FA Pressure gauge kit -1 to 10 bar g for 11⁄2" Tri-Clamp connection to ISO 2852
(includes clamp and gasket)