Professional Documents
Culture Documents
Model M26
Manifold line for 266 pressure transmitters
PTFE properties
Mechanical properties
PTFE has good tensile properties different from other plastic
materials as it may be used over a wide temperature range
from – 250°C to +250°C ( -418°F to +482°F ) . PTFE shows
the lowest friction values compared to other plastic materials.
Furthermore, being the static friction values almost equal to
the dynamic friction values, there is no tendency to seizure
within a sliding system situation, and therefore no detachment
friction.
Electrical properties
PTFE has very good electrical properties. Dielectric strength is Graphoil properties
excellent and remains unchanged even at high temperature, it Mechanical properties
only decreases depending on the material thickness and on Graphoil may be used over a wide temperature range from
the electrical frequency values. Dielectric constant values and – 250°C to +600°C ( -400°F to +1112°F ) .
dissipation factor are among the lowest values and remain It features high resistance to corrosion, heat and fire.
unchanged even at high temperatures and at a wide Graphoil is generally used in high temperature processes
frequency range. Good resistance to arc and corona effect. where thermal and/or mechanical shocks can occur.
It provides an excellent seal even with low torques or irregular
Other properties flange surfaces.
PTFE surfaces are highly anti adhesive and do not absorb
moisture. PTFE is non-toxic and can be used in contact with Other properties
food. There are some limitations only for some kinds of filled Graphoil is a packing and gasket material made exclusively
PTFE due to the toxicity of some filling elements ( i.e. heavy from natural graphite flake.
metals and its compounds ) . Its high degree of chemical compatibility makes Graphoil inert
to most chemicals and gases with the exception of strong
oxidizing agents.
Note:
For details about the correct codification of each single model of manifold,
please refer to the ordering information at the end of this document.
Note:
For details about the correct codification of each single model of manifold,
please refer to the ordering information at the end of this document.
Note:
For details about the correct codification of each single model of manifold,
please refer to the ordering information at the end of this document.
Note:
For details about the correct codification of each single model of manifold,
please refer to the ordering information at the end of this document.
OUT
1/4" NPT-F DRAIN
57 (2.24)
ISOLATE
120 (4.72)
30 (1.18)
VENT.
22 (0.87) IN
148 (5.83)
FULLY OPEN
M26.P.A.S.2.V. Two-valve manifold with threaded connection (1/2 in. - 14 NPT female inlet and 1/2 in. - 14 NPT male outlet);
pressure rating 690 bar (69 MPa, 10000 psi)
148 (5.83)
FULLY OPEN
22 (0.87)
OUT
Ø
5,
5
(0
21.
)
30 (1.18)
VENT.
120 (4.72)
ISOLATE
56 (2.20)
30 (1.18)
IN
OUT
143 (5.63)
FULLY OPEN
22 (0.87)
34 (1.34)
Ø5
,5
(0.
22
)
ISOLATE
30 (1.18)
120 (4.73)
VENT
IN
30 (1.18)
M26.P.A.S.2.V. Two-valve manifold with threaded connection (1/2 in. - 14 NPT female inlet and female outlet);
pressure rating 690 bar (69 MPa, 10000 psi)
OUT
N°2 FIXING HOLES Ø7 (0.27)
60 (2.36)
ISOLATE
VENT.
1/4" NPT-F DRAIN
IN
50 (1.97)
ISOLATE
30 (1.18)
VENT.
168 (6.61)
FULLY OPEN
ISOLATE
2x Ø12 (0.47)
FULLY OPEN
108,2 (4.26)
20 (0.79)
32 (1.30)
75 (2.95)
131,4 (5.17)
FULLY OPEN
42,5 (1.77)
10 (0.39)
M26.D.A.S.2.V. Two-valve manifold for standard flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inlet
and flanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).
11 (0.43)
M10 x 1.5
16 (0.63)
35 (1.38)
61 (2.40)
VENT
2X Ø12 (0.47)
FULLY OPEN
89 (3.50)
ISOLATE
60 (2.36)
41,3 (1.63)
INLET SIDE
1/2" NPT-F 18 (0.71)
40 (1.57) INSTRUMENT SIDE
(IEC 61518/B) 75 (2.95)
71,4 (2.81)
FULLY OPEN 131,4 (5.17)
FULLY OPEN
EQUALISE
20 (0.79)
2x M10x1.5
2x 1/4" NPT-F DRAIN
ISOLATE ISOLATE
16 (0.63)
30 (1.18)
84 (3.30)
7)
.4
(0
12
Ø
4x
FULLY OPEN
88,1 (3.47)
60 (2.36)
41,3 (1.63)
INLET SIDE
54 (2.13) 2x 1/2" NPT-F
INSTRUMENT SIDE 40 (1.57)
105 (4.13) (IEC 61518/B)
217,8 (8.57) 72,9 (2.87)
FULLY OPEN
M26.D.A.V.3.V. Three-valve manifold for vertical flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inlet
and flanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).
2x
16 (0.63)
M
10
x1
.5
80 (3.15)
EQUALISE
ISOLATE ISOLATE
)
47
(0.
FULLY OPEN
126,3 (4.97)
2
Ø1
70 (2.75)
41,3 (1.63)
INLET SIDE
2x 1/2" NPT-F
258 (9.96)
10 (0.39)
24 (0.94)
30 (1.18)
115 (4.53)
VENT VENT
EQUALISE
)
47
(0.
2
109 (4.29)
Ø1
ISOLATE ISOLATE
60 (2.36)
41,3 (1.63)
INLET SIDE
2x 1/2" NPT-F
40 (1.57)
54 (2.13) INSTRUMENT SIDE
155 (6.10) (IEC 61518/B) 71,4 (2.81)
267,8 (10.54)
M26.D.A.V.5.V. Five-valve manifold for vertical flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inlet and
flanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).
16 (0.63)
2x M10x1.5
80 (3.15)
EQUALISE
ISOLATE ISOLATE
FULLY OPEN
126,3 (4.98)
VENT VENT
70 (2.75)
41,3 (1.63)
INLET SIDE
2x 1/2" NPT-F
62 (2.44)
36 (1.42)
162 (6.35)
1/2" - 14 NPT 105 (4.12)
72 (2.83) 49 (1.93)
116 (4.57)
143 (5.63)
Gauge or absolute pressure transmitter (266HSH, 266GSx, 266ASx) on its mounting bracket with M26.P.A.S.2.V.
(1/2 in. - 14 NPT female inlet and 1/2 in. - 14 NPT male outlet threaded connection).
62 (2.44)
142 (5.57)
36 (1.42)
1/2" - 14 NPT
105 (4.12)
72 (2.83) 49 (1.93)
116 (4.57)
148 (5.83)
Gauge or absolute pressure transmitter (266HSH, 266GSx, 266ASx) on its mounting bracket with M26.P.A.S.2.V.
(1/2 in. - 14 NPT male inlet and outlet threaded connection).
18 (0.71) 58 (2.28) 78 (3.04) 18 (0.71)
91 (3.58) Space for 9 (0.35) 55 (2.16) Space for
cover removal cover removal
162 (6.37)
224 (8.82)
282 (11.08)
62 (2.44)
36 (1.42)
162 (6.35)
1/2" - 14 NPT 105 (4.12)
72 (2.83)
116 (4.57)
143 (5.63)
Gauge or absolute pressure transmitter (266HSH, 266GSx, 266ASx) on its mounting bracket with M26.P.A.S.2.V.
(1/2 in. - 14 NPT female inlet and outlet threaded connection).
62 (2.44)
102 (3.99)
36 (1.42)
1/2" - 14 NPT
105 (4.12)
72 (2.83)
116 (4.57)
168 (6.61)
208 (8.19)
158 (6.23)
Pressure transmitter DP-Style (266PSH, 266VSH, 266RSx) with vertical flanges on manifold bracket with M26.D.A.V.2.V.
(1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B)
48 (1.89)
208 (8.19)
11 (0.43)
158 (6.23)
92 (3.63)
62 (2.45)
144 (5.68)
258 (9.96) 236 (9.28)
208 (8.19)
179 (7.02)
11 (0.43)
158 (6.23)
92 (3.63)
62 (2.45)
144 (5.68)
262.8 (10.35) 236 (9.28)
Ordering information
BASIC ORDERING INFORMATION model M26 manifold
Select one character or set of characters from each category and specify complete catalogue number.
Refer to additional ordering information and specify one or more codes for each transmitter if additional options are required.
BASE MODEL - 1st to 3rd characters M26 X X X X X X X X X X
Manifold model for 266 Pressure Transmitters
Design - 4th character
Manifold for DP Style transmitters D
Manifold for P Style transmitters P
Revision - 5th character
Revision A A
Body configuration - 6th character
Standard construction S
For vertical-flange transmitter (Note 1) V
Valves - 7 character
th
Two-valve manifold 2
Three-valve manifold (Note 1) 3
Five-valve manifold (Note 1) 5
Valve Type - 8th character
Standard V
Material (wetted parts) - 9th character
AISI 316L ss NACE S
Hastelloy C276 NACE H
Monel 400 M
Inconel 625 N
Packing material - 10th character
PTFE P
Graphoil G
Gasket material (wetted parts) - 11th character
None (Note 2) N
PTFE (Notes 1, 5) P
Graphoil (Notes 1, 6) G
Manifold process connection (INLET)- 12th character
Threaded 1/2 in. - 14 NPT-female F
Threaded 1/2 in. - 14 NPT-male (Note 2) M
Manifold transmitter connection (OUTLET)- 13th character
Flanged outlet according to IEC61518/B (Note 1) 1
Threaded 1/2 in. - 14 NPT-female (Note 2) F
Threaded 1/2 in. - 14 NPT-male (Note 2) M
NACE CONFORMITY IS ACCORDING TO Recommendations PER MR0175 2003 / ISO 15156-3 FOR AISI 316L,
HASTELLOY C-276, INCONEL 625 AND MONEL 400
3 and 5 valve M26 manifolds are in compliance with ASME B31.1 - Power Piping.
Fax: +44 (0)1480 217948 We reserve all rights in this document and in the
subject matter and illustrations contained therein.
ABB Inc. Any reproduction, disclosure to third parties or
Process Automation utilization of its contents - in whole or in parts – is
forbidden without prior written consent of ABB.
125 E. County Line Road
Warminster, PA 18974 Copyright© 2016 ABB
USA All rights reserved
Tel: +1 215 674 6000
3KXP7200007R1001
Fax: +1 215 674 7183
www.abb.com