Professional Documents
Culture Documents
During well completion, the device that is run to form a seal between the casing
and the tubing is call
A) Packer
B) Sliding Sleeve
C) Ported Nipple
The process of creating holes in the casing that pass through the cement sheath and
extend some depth into the perforation is call
A) Perforation
B) Fracturing
C) Acidizing
D) None of the above
During well completion, the device that is run to form a seal between the casing
and the tubing is call
A) Packer
B) Sliding Sleeve
C) Ported Nipple
The process of creating holes in the casing that pass through the cement sheath and
extend some depth into the perforation is call
A) Perforation
B) Fracturing
C) Acidizing
D) None of the above
During well completion, the device that is run to form a seal between the casing
and the tubing is call
A) Packer
B) Sliding Sleeve
C) Ported Nipple
The process of creating holes in the casing that pass through the cement sheath and
extend some depth into the perforation is call
A) Perforation
B) Fracturing
C) Acidizing
D) None of the above
During well completion, the device that is run to form a seal between the casing
and the tubing is call
A) Packer
B) Sliding Sleeve
C) Ported Nipple
The process of creating holes in the casing that pass through the cement sheath and
extend some depth into the perforation is call
A) Perforation
B) Fracturing
C) Acidizing
D) None of the above
During well completion, the device that is run to form a seal between the casing
and the tubing is call
A) Packer
B) Sliding Sleeve
C) Ported Nipple
The process of creating holes in the casing that pass through the cement sheath and
extend some depth into the perforation is call
A) Perforation
B) Fracturing
C) Acidizing
D) None of the above
During well completion, the device that is run to form a seal between the casing
and the tubing is call
A) Packer
B) Sliding Sleeve
C) Ported Nipple
The process of creating holes in the casing that pass through the cement sheath and
extend some depth into the perforation is call
A) Perforation
B) Fracturing
C) Acidizing
D) None of the above
During well completion, the device that is run to form a seal between the casing
and the tubing is call
A) Packer
B) Sliding Sleeve
C) Ported Nipple
The process of creating holes in the casing that pass through the cement sheath and
extend some depth into the perforation is call
A) Perforation
B) Fracturing
C) Acidizing
D) None of the above
In offshore drilling operations, what determine the type of drilling to be used
A) The hardness of the formation to be drlled
B) The water depth
C) The type of reservoir fluid expected